[linux-2.6-block.git] / drivers / rtc / rtc-pcf2123.c

/*
 * An SPI driver for the Philips PCF2123 RTC
 * Copyright 2009 Cyber Switching, Inc.
 *
 * Author: Chris Verges <chrisv@cyberswitching.com>
 * Maintainers: http://www.cyberswitching.com
 *
 * based on the RS5C348 driver in this same directory.
 *
 * Thanks to Christian Pellegrin <chripell@fsfe.org> for
 * the sysfs contributions to this driver.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * Please note that the CS is active high, so platform data
 * should look something like:
 *
 * static struct spi_board_info ek_spi_devices[] = {
 *	...
 *	{
 *		.modalias		= "rtc-pcf2123",
 *		.chip_select		= 1,
 *		.controller_data	= (void *)AT91_PIN_PA10,
 *		.max_speed_hz		= 1000 * 1000,
 *		.mode			= SPI_CS_HIGH,
 *		.bus_num		= 0,
 *	},
 *	...
 *};
 *
 */

#include <linux/bcd.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/rtc.h>
#include <linux/spi/spi.h>
#include <linux/module.h>
#include <linux/sysfs.h>

/* REGISTERS */
#define PCF2123_REG_CTRL1	(0x00)	/* Control Register 1 */
#define PCF2123_REG_CTRL2	(0x01)	/* Control Register 2 */
#define PCF2123_REG_SC		(0x02)	/* datetime */
#define PCF2123_REG_MN		(0x03)
#define PCF2123_REG_HR		(0x04)
#define PCF2123_REG_DM		(0x05)
#define PCF2123_REG_DW		(0x06)
#define PCF2123_REG_MO		(0x07)
#define PCF2123_REG_YR		(0x08)
#define PCF2123_REG_ALRM_MN	(0x09)	/* Alarm Registers */
#define PCF2123_REG_ALRM_HR	(0x0a)
#define PCF2123_REG_ALRM_DM	(0x0b)
#define PCF2123_REG_ALRM_DW	(0x0c)
#define PCF2123_REG_OFFSET	(0x0d)	/* Clock Rate Offset Register */
#define PCF2123_REG_TMR_CLKOUT	(0x0e)	/* Timer Registers */
#define PCF2123_REG_CTDWN_TMR	(0x0f)

/* PCF2123_REG_CTRL1 BITS */
#define CTRL1_CLEAR		(0)	/* Clear */
#define CTRL1_CORR_INT		BIT(1)	/* Correction irq enable */
#define CTRL1_12_HOUR		BIT(2)	/* 12 hour time */
#define CTRL1_SW_RESET	(BIT(3) | BIT(4) | BIT(6))	/* Software reset */
#define CTRL1_STOP		BIT(5)	/* Stop the clock */
#define CTRL1_EXT_TEST		BIT(7)	/* External clock test mode */

/* PCF2123_REG_CTRL2 BITS */
#define CTRL2_TIE		BIT(0)	/* Countdown timer irq enable */
#define CTRL2_AIE		BIT(1)	/* Alarm irq enable */
#define CTRL2_TF		BIT(2)	/* Countdown timer flag */
#define CTRL2_AF		BIT(3)	/* Alarm flag */
#define CTRL2_TI_TP		BIT(4)	/* Irq pin generates pulse */
#define CTRL2_MSF		BIT(5)	/* Minute or second irq flag */
#define CTRL2_SI		BIT(6)	/* Second irq enable */
#define CTRL2_MI		BIT(7)	/* Minute irq enable */

/* PCF2123_REG_SC BITS */
#define OSC_HAS_STOPPED		BIT(7)	/* Clock has been stopped */

/* PCF2123_REG_ALRM_XX BITS */
#define ALRM_ENABLE		BIT(7)	/* MN, HR, DM, or DW alarm enable */

/* PCF2123_REG_TMR_CLKOUT BITS */
#define CD_TMR_4096KHZ		(0)	/* 4096 KHz countdown timer */
#define CD_TMR_64HZ		(1)	/* 64 Hz countdown timer */
#define CD_TMR_1HZ		(2)	/* 1 Hz countdown timer */
#define CD_TMR_60th_HZ		(3)	/* 60th Hz countdown timer */
#define CD_TMR_TE		BIT(3)	/* Countdown timer enable */

/* PCF2123_REG_OFFSET BITS */
#define OFFSET_SIGN_BIT		BIT(6)	/* 2's complement sign bit */
#define OFFSET_COARSE		BIT(7)	/* Coarse mode offset */
#define OFFSET_STEP		(2170)	/* Offset step in parts per billion */

/* READ/WRITE ADDRESS BITS */
#define PCF2123_WRITE		BIT(4)
#define PCF2123_READ		(BIT(4) | BIT(7))


static struct spi_driver pcf2123_driver;

struct pcf2123_sysfs_reg {
	struct device_attribute attr;
	char name[2];
};

struct pcf2123_plat_data {
	struct rtc_device *rtc;
	struct pcf2123_sysfs_reg regs[16];
};

/*
 * Causes a 30 nanosecond delay to ensure that the PCF2123 chip select
 * is released properly after an SPI write.  This function should be
 * called after EVERY read/write call over SPI.
 */
static inline void pcf2123_delay_trec(void)
{
	ndelay(30);
}

static int pcf2123_read(struct device *dev, u8 reg, u8 *rxbuf, size_t size)
{
	struct spi_device *spi = to_spi_device(dev);
	int ret;

	reg |= PCF2123_READ;
	ret = spi_write_then_read(spi, &reg, 1, rxbuf, size);
	pcf2123_delay_trec();

	return ret;
}

static int pcf2123_write(struct device *dev, u8 *txbuf, size_t size)
{
	struct spi_device *spi = to_spi_device(dev);
	int ret;

	txbuf[0] |= PCF2123_WRITE;
	ret = spi_write(spi, txbuf, size);
	pcf2123_delay_trec();

	return ret;
}

static int pcf2123_write_reg(struct device *dev, u8 reg, u8 val)
{
	u8 txbuf[2];

	txbuf[0] = reg;
	txbuf[1] = val;
	return pcf2123_write(dev, txbuf, sizeof(txbuf));
}

static ssize_t pcf2123_show(struct device *dev, struct device_attribute *attr,
			    char *buffer)
{
	struct pcf2123_sysfs_reg *r;
	u8 rxbuf[1];
	unsigned long reg;
	int ret;

	r = container_of(attr, struct pcf2123_sysfs_reg, attr);

	ret = kstrtoul(r->name, 16, &reg);
	if (ret)
		return ret;

	ret = pcf2123_read(dev, reg, rxbuf, 1);
	if (ret < 0)
		return -EIO;

	return sprintf(buffer, "0x%x\n", rxbuf[0]);
}

static ssize_t pcf2123_store(struct device *dev, struct device_attribute *attr,
			     const char *buffer, size_t count) {
	struct pcf2123_sysfs_reg *r;
	unsigned long reg;
	unsigned long val;

	int ret;

	r = container_of(attr, struct pcf2123_sysfs_reg, attr);

	ret = kstrtoul(r->name, 16, &reg);
	if (ret)
		return ret;

	ret = kstrtoul(buffer, 10, &val);
	if (ret)
		return ret;

	pcf2123_write_reg(dev, reg, val);
	if (ret < 0)
		return -EIO;
	return count;
}

static int pcf2123_read_offset(struct device *dev, long *offset)
{
	int ret;
	s8 reg;

	ret = pcf2123_read(dev, PCF2123_REG_OFFSET, &reg, 1);
	if (ret < 0)
		return ret;

	if (reg & OFFSET_COARSE)
		reg <<= 1; /* multiply by 2 and sign extend */
	else
		reg |= (reg & OFFSET_SIGN_BIT) << 1; /* sign extend only */

	*offset = ((long)reg) * OFFSET_STEP;

	return 0;
}

/*
 * The offset register is a 7 bit signed value with a coarse bit in bit 7.
 * The main difference between the two is normal offset adjusts the first
 * second of n minutes every other hour, with 61, 62 and 63 being shoved
 * into the 60th minute.
 * The coarse adjustment does the same, but every hour.
 * the two overlap, with every even normal offset value corresponding
 * to a coarse offset. Based on this algorithm, it seems that despite the
 * name, coarse offset is a better fit for overlapping values.
 */
static int pcf2123_set_offset(struct device *dev, long offset)
{
	s8 reg;

	if (offset > OFFSET_STEP * 127)
		reg = 127;
	else if (offset < OFFSET_STEP * -128)
		reg = -128;
	else
		reg = (s8)((offset + (OFFSET_STEP >> 1)) / OFFSET_STEP);

	/* choose fine offset only for odd values in the normal range */
	if (reg & 1 && reg <= 63 && reg >= -64) {
		/* Normal offset. Clear the coarse bit */
		reg &= ~OFFSET_COARSE;
	} else {
		/* Coarse offset. Divide by 2 and set the coarse bit */
		reg >>= 1;
		reg |= OFFSET_COARSE;
	}

	return pcf2123_write_reg(dev, PCF2123_REG_OFFSET, reg);
}

static int pcf2123_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
	u8 rxbuf[7];
	int ret;

	ret = pcf2123_read(dev, PCF2123_REG_SC, rxbuf, sizeof(rxbuf));
	if (ret < 0)
		return ret;

	if (rxbuf[0] & OSC_HAS_STOPPED) {
		dev_info(dev, "clock was stopped. Time is not valid\n");
		return -EINVAL;
	}

	tm->tm_sec = bcd2bin(rxbuf[0] & 0x7F);
	tm->tm_min = bcd2bin(rxbuf[1] & 0x7F);
	tm->tm_hour = bcd2bin(rxbuf[2] & 0x3F); /* rtc hr 0-23 */
	tm->tm_mday = bcd2bin(rxbuf[3] & 0x3F);
	tm->tm_wday = rxbuf[4] & 0x07;
	tm->tm_mon = bcd2bin(rxbuf[5] & 0x1F) - 1; /* rtc mn 1-12 */
	tm->tm_year = bcd2bin(rxbuf[6]);
	if (tm->tm_year < 70)
		tm->tm_year += 100;	/* assume we are in 1970...2069 */

	dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
			"mday=%d, mon=%d, year=%d, wday=%d\n",
			__func__,
			tm->tm_sec, tm->tm_min, tm->tm_hour,
			tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);

	return rtc_valid_tm(tm);
}

static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
	u8 txbuf[8];
	int ret;

	dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
			"mday=%d, mon=%d, year=%d, wday=%d\n",
			__func__,
			tm->tm_sec, tm->tm_min, tm->tm_hour,
			tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);

	/* Stop the counter first */
	ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_STOP);
	if (ret < 0)
		return ret;

	/* Set the new time */
	txbuf[0] = PCF2123_REG_SC;
	txbuf[1] = bin2bcd(tm->tm_sec & 0x7F);
	txbuf[2] = bin2bcd(tm->tm_min & 0x7F);
	txbuf[3] = bin2bcd(tm->tm_hour & 0x3F);
	txbuf[4] = bin2bcd(tm->tm_mday & 0x3F);
	txbuf[5] = tm->tm_wday & 0x07;
	txbuf[6] = bin2bcd((tm->tm_mon + 1) & 0x1F); /* rtc mn 1-12 */
	txbuf[7] = bin2bcd(tm->tm_year < 100 ? tm->tm_year : tm->tm_year - 100);

	ret = pcf2123_write(dev, txbuf, sizeof(txbuf));
	if (ret < 0)
		return ret;

	/* Start the counter */
	ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_CLEAR);
	if (ret < 0)
		return ret;

	return 0;
}

static int pcf2123_reset(struct device *dev)
{
	int ret;
	u8  rxbuf[2];

	ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_SW_RESET);
	if (ret < 0)
		return ret;

	/* Stop the counter */
	dev_dbg(dev, "stopping RTC\n");
	ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_STOP);
	if (ret < 0)
		return ret;

	/* See if the counter was actually stopped */
	dev_dbg(dev, "checking for presence of RTC\n");
	ret = pcf2123_read(dev, PCF2123_REG_CTRL1, rxbuf, sizeof(rxbuf));
	if (ret < 0)
		return ret;

	dev_dbg(dev, "received data from RTC (0x%02X 0x%02X)\n",
		rxbuf[0], rxbuf[1]);
	if (!(rxbuf[0] & CTRL1_STOP))
		return -ENODEV;

	/* Start the counter */
	ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_CLEAR);
	if (ret < 0)
		return ret;

	return 0;
}

static const struct rtc_class_ops pcf2123_rtc_ops = {
	.read_time	= pcf2123_rtc_read_time,
	.set_time	= pcf2123_rtc_set_time,
	.read_offset	= pcf2123_read_offset,
	.set_offset	= pcf2123_set_offset,

};

static int pcf2123_probe(struct spi_device *spi)
{
	struct rtc_device *rtc;
	struct rtc_time tm;
	struct pcf2123_plat_data *pdata;
	int ret, i;

	pdata = devm_kzalloc(&spi->dev, sizeof(struct pcf2123_plat_data),
				GFP_KERNEL);
	if (!pdata)
		return -ENOMEM;
	spi->dev.platform_data = pdata;

	ret = pcf2123_rtc_read_time(&spi->dev, &tm);
	if (ret < 0) {
		ret = pcf2123_reset(&spi->dev);
		if (ret < 0) {
			dev_err(&spi->dev, "chip not found\n");
			goto kfree_exit;
		}
	}

	dev_info(&spi->dev, "spiclk %u KHz.\n",
			(spi->max_speed_hz + 500) / 1000);

	/* Finalize the initialization */
	rtc = devm_rtc_device_register(&spi->dev, pcf2123_driver.driver.name,
			&pcf2123_rtc_ops, THIS_MODULE);

	if (IS_ERR(rtc)) {
		dev_err(&spi->dev, "failed to register.\n");
		ret = PTR_ERR(rtc);
		goto kfree_exit;
	}

	pdata->rtc = rtc;

	for (i = 0; i < 16; i++) {
		sysfs_attr_init(&pdata->regs[i].attr.attr);
		sprintf(pdata->regs[i].name, "%1x", i);
		pdata->regs[i].attr.attr.mode = S_IRUGO | S_IWUSR;
		pdata->regs[i].attr.attr.name = pdata->regs[i].name;
		pdata->regs[i].attr.show = pcf2123_show;
		pdata->regs[i].attr.store = pcf2123_store;
		ret = device_create_file(&spi->dev, &pdata->regs[i].attr);
		if (ret) {
			dev_err(&spi->dev, "Unable to create sysfs %s\n",
				pdata->regs[i].name);
			goto sysfs_exit;
		}
	}

	return 0;

sysfs_exit:
	for (i--; i >= 0; i--)
		device_remove_file(&spi->dev, &pdata->regs[i].attr);

kfree_exit:
	spi->dev.platform_data = NULL;
	return ret;
}

static int pcf2123_remove(struct spi_device *spi)
{
	struct pcf2123_plat_data *pdata = dev_get_platdata(&spi->dev);
	int i;

	if (pdata) {
		for (i = 0; i < 16; i++)
			if (pdata->regs[i].name[0])
				device_remove_file(&spi->dev,
						   &pdata->regs[i].attr);
	}

	return 0;
}

#ifdef CONFIG_OF
static const struct of_device_id pcf2123_dt_ids[] = {
	{ .compatible = "nxp,rtc-pcf2123", },
	{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, pcf2123_dt_ids);
#endif

static struct spi_driver pcf2123_driver = {
	.driver	= {
			.name	= "rtc-pcf2123",
			.of_match_table = of_match_ptr(pcf2123_dt_ids),
	},
	.probe	= pcf2123_probe,
	.remove	= pcf2123_remove,
};

module_spi_driver(pcf2123_driver);

MODULE_AUTHOR("Chris Verges <chrisv@cyberswitching.com>");
MODULE_DESCRIPTION("NXP PCF2123 RTC driver");
MODULE_LICENSE("GPL");
Commit	Line	Data
7f3923a1 CV	1	/*
	2	* An SPI driver for the Philips PCF2123 RTC
	3	* Copyright 2009 Cyber Switching, Inc.
	4	*
	5	* Author: Chris Verges <chrisv@cyberswitching.com>
	6	* Maintainers: http://www.cyberswitching.com
	7	*
	8	* based on the RS5C348 driver in this same directory.
	9	*
	10	* Thanks to Christian Pellegrin <chripell@fsfe.org> for
	11	* the sysfs contributions to this driver.
	12	*
	13	* This program is free software; you can redistribute it and/or modify
	14	* it under the terms of the GNU General Public License version 2 as
	15	* published by the Free Software Foundation.
	16	*
	17	* Please note that the CS is active high, so platform data
	18	* should look something like:
	19	*
	20	* static struct spi_board_info ek_spi_devices[] = {
369015fb SK	21	* ...
	22	* {
	23	* .modalias = "rtc-pcf2123",
	24	* .chip_select = 1,
	25	* .controller_data = (void *)AT91_PIN_PA10,
7f3923a1 CV	26	* .max_speed_hz = 1000 * 1000,
	27	* .mode = SPI_CS_HIGH,
	28	* .bus_num = 0,
	29	* },
	30	* ...
	31	*};
	32	*
	33	*/
	34
	35	#include <linux/bcd.h>
	36	#include <linux/delay.h>
	37	#include <linux/device.h>
	38	#include <linux/errno.h>
	39	#include <linux/init.h>
	40	#include <linux/kernel.h>
3fc70077	41	#include <linux/of.h>
7f3923a1	42	#include <linux/string.h>
5a0e3ad6	43	#include <linux/slab.h>
7f3923a1 CV	44	#include <linux/rtc.h>
7f3923a1 CV	45	#include <linux/spi/spi.h>
2113852b	46	#include <linux/module.h>
5ed12f12	47	#include <linux/sysfs.h>
7f3923a1	48
245cb74b	49	/* REGISTERS */
7f3923a1 CV	50	#define PCF2123_REG_CTRL1 (0x00) /* Control Register 1 */
	51	#define PCF2123_REG_CTRL2 (0x01) /* Control Register 2 */
	52	#define PCF2123_REG_SC (0x02) /* datetime */
	53	#define PCF2123_REG_MN (0x03)
	54	#define PCF2123_REG_HR (0x04)
	55	#define PCF2123_REG_DM (0x05)
	56	#define PCF2123_REG_DW (0x06)
	57	#define PCF2123_REG_MO (0x07)
	58	#define PCF2123_REG_YR (0x08)
245cb74b JC	59	#define PCF2123_REG_ALRM_MN (0x09) /* Alarm Registers */
	60	#define PCF2123_REG_ALRM_HR (0x0a)
	61	#define PCF2123_REG_ALRM_DM (0x0b)
	62	#define PCF2123_REG_ALRM_DW (0x0c)
	63	#define PCF2123_REG_OFFSET (0x0d) /* Clock Rate Offset Register */
	64	#define PCF2123_REG_TMR_CLKOUT (0x0e) /* Timer Registers */
	65	#define PCF2123_REG_CTDWN_TMR (0x0f)
	66
	67	/* PCF2123_REG_CTRL1 BITS */
	68	#define CTRL1_CLEAR (0) /* Clear */
	69	#define CTRL1_CORR_INT BIT(1) /* Correction irq enable */
	70	#define CTRL1_12_HOUR BIT(2) /* 12 hour time */
	71	#define CTRL1_SW_RESET (BIT(3) \| BIT(4) \| BIT(6)) /* Software reset */
	72	#define CTRL1_STOP BIT(5) /* Stop the clock */
	73	#define CTRL1_EXT_TEST BIT(7) /* External clock test mode */
	74
	75	/* PCF2123_REG_CTRL2 BITS */
	76	#define CTRL2_TIE BIT(0) /* Countdown timer irq enable */
	77	#define CTRL2_AIE BIT(1) /* Alarm irq enable */
	78	#define CTRL2_TF BIT(2) /* Countdown timer flag */
	79	#define CTRL2_AF BIT(3) /* Alarm flag */
	80	#define CTRL2_TI_TP BIT(4) /* Irq pin generates pulse */
	81	#define CTRL2_MSF BIT(5) /* Minute or second irq flag */
	82	#define CTRL2_SI BIT(6) /* Second irq enable */
	83	#define CTRL2_MI BIT(7) /* Minute irq enable */
	84
	85	/* PCF2123_REG_SC BITS */
	86	#define OSC_HAS_STOPPED BIT(7) /* Clock has been stopped */
	87
	88	/* PCF2123_REG_ALRM_XX BITS */
	89	#define ALRM_ENABLE BIT(7) /* MN, HR, DM, or DW alarm enable */
	90
	91	/* PCF2123_REG_TMR_CLKOUT BITS */
	92	#define CD_TMR_4096KHZ (0) /* 4096 KHz countdown timer */
	93	#define CD_TMR_64HZ (1) /* 64 Hz countdown timer */
	94	#define CD_TMR_1HZ (2) /* 1 Hz countdown timer */
	95	#define CD_TMR_60th_HZ (3) /* 60th Hz countdown timer */
	96	#define CD_TMR_TE BIT(3) /* Countdown timer enable */
	97
	98	/* PCF2123_REG_OFFSET BITS */
	99	#define OFFSET_SIGN_BIT BIT(6) /* 2's complement sign bit */
	100	#define OFFSET_COARSE BIT(7) /* Coarse mode offset */
bae2f647	101	#define OFFSET_STEP (2170) /* Offset step in parts per billion */
245cb74b JC	102
	103	/* READ/WRITE ADDRESS BITS */
	104	#define PCF2123_WRITE BIT(4)
	105	#define PCF2123_READ (BIT(4) \| BIT(7))
7f3923a1	106
7f3923a1 CV	107
	108	static struct spi_driver pcf2123_driver;
	109
	110	struct pcf2123_sysfs_reg {
f3d2570a	111	struct device_attribute attr;
7f3923a1 CV	112	char name[2];
	113	};
	114
	115	struct pcf2123_plat_data {
	116	struct rtc_device *rtc;
	117	struct pcf2123_sysfs_reg regs[16];
	118	};
	119
	120	/*
	121	* Causes a 30 nanosecond delay to ensure that the PCF2123 chip select
	122	* is released properly after an SPI write. This function should be
	123	* called after EVERY read/write call over SPI.
	124	*/
	125	static inline void pcf2123_delay_trec(void)
	126	{
	127	ndelay(30);
	128	}
	129
66c056d6 JC	130	static int pcf2123_read(struct device dev, u8 reg, u8 rxbuf, size_t size)
	131	{
	132	struct spi_device *spi = to_spi_device(dev);
	133	int ret;
	134
	135	reg \|= PCF2123_READ;
	136	ret = spi_write_then_read(spi, &reg, 1, rxbuf, size);
	137	pcf2123_delay_trec();
	138
	139	return ret;
	140	}
	141
809b453b JC	142	static int pcf2123_write(struct device dev, u8 txbuf, size_t size)
	143	{
	144	struct spi_device *spi = to_spi_device(dev);
	145	int ret;
	146
	147	txbuf[0] \|= PCF2123_WRITE;
	148	ret = spi_write(spi, txbuf, size);
	149	pcf2123_delay_trec();
	150
	151	return ret;
	152	}
	153
	154	static int pcf2123_write_reg(struct device *dev, u8 reg, u8 val)
	155	{
	156	u8 txbuf[2];
	157
	158	txbuf[0] = reg;
	159	txbuf[1] = val;
	160	return pcf2123_write(dev, txbuf, sizeof(txbuf));
	161	}
	162
7f3923a1 CV	163	static ssize_t pcf2123_show(struct device dev, struct device_attribute attr,
	164	char *buffer)
	165	{
f3d2570a	166	struct pcf2123_sysfs_reg *r;
66c056d6	167	u8 rxbuf[1];
f3d2570a	168	unsigned long reg;
7f3923a1 CV	169	int ret;
7f3923a1 CV	170
f3d2570a CV	171	r = container_of(attr, struct pcf2123_sysfs_reg, attr);
f3d2570a CV	172
4c5591c1 JH	173	ret = kstrtoul(r->name, 16, &reg);
	174	if (ret)
	175	return ret;
f3d2570a	176
66c056d6	177	ret = pcf2123_read(dev, reg, rxbuf, 1);
7f3923a1	178	if (ret < 0)
f3d2570a	179	return -EIO;
66c056d6	180
f3d2570a	181	return sprintf(buffer, "0x%x\n", rxbuf[0]);
7f3923a1 CV	182	}
	183
	184	static ssize_t pcf2123_store(struct device dev, struct device_attribute attr,
	185	const char *buffer, size_t count) {
f3d2570a	186	struct pcf2123_sysfs_reg *r;
f3d2570a CV	187	unsigned long reg;
	188	unsigned long val;
	189
7f3923a1 CV	190	int ret;
7f3923a1 CV	191
f3d2570a CV	192	r = container_of(attr, struct pcf2123_sysfs_reg, attr);
f3d2570a CV	193
4c5591c1 JH	194	ret = kstrtoul(r->name, 16, &reg);
	195	if (ret)
	196	return ret;
	197
	198	ret = kstrtoul(buffer, 10, &val);
	199	if (ret)
	200	return ret;
f3d2570a	201
809b453b	202	pcf2123_write_reg(dev, reg, val);
7f3923a1 CV	203	if (ret < 0)
7f3923a1 CV	204	return -EIO;
7f3923a1 CV	205	return count;
	206	}
	207
bae2f647 JC	208	static int pcf2123_read_offset(struct device dev, long offset)
	209	{
	210	int ret;
	211	s8 reg;
	212
	213	ret = pcf2123_read(dev, PCF2123_REG_OFFSET, &reg, 1);
	214	if (ret < 0)
	215	return ret;
	216
	217	if (reg & OFFSET_COARSE)
	218	reg <<= 1; /* multiply by 2 and sign extend */
	219	else
	220	reg \|= (reg & OFFSET_SIGN_BIT) << 1; /* sign extend only */
	221
	222	offset = ((long)reg) OFFSET_STEP;
	223
	224	return 0;
	225	}
	226
	227	/*
	228	* The offset register is a 7 bit signed value with a coarse bit in bit 7.
	229	* The main difference between the two is normal offset adjusts the first
	230	* second of n minutes every other hour, with 61, 62 and 63 being shoved
	231	* into the 60th minute.
	232	* The coarse adjustment does the same, but every hour.
	233	* the two overlap, with every even normal offset value corresponding
	234	* to a coarse offset. Based on this algorithm, it seems that despite the
	235	* name, coarse offset is a better fit for overlapping values.
	236	*/
	237	static int pcf2123_set_offset(struct device *dev, long offset)
	238	{
	239	s8 reg;
	240
	241	if (offset > OFFSET_STEP * 127)
	242	reg = 127;
	243	else if (offset < OFFSET_STEP * -128)
	244	reg = -128;
	245	else
	246	reg = (s8)((offset + (OFFSET_STEP >> 1)) / OFFSET_STEP);
	247
	248	/* choose fine offset only for odd values in the normal range */
	249	if (reg & 1 && reg <= 63 && reg >= -64) {
	250	/* Normal offset. Clear the coarse bit */
	251	reg &= ~OFFSET_COARSE;
	252	} else {
	253	/* Coarse offset. Divide by 2 and set the coarse bit */
	254	reg >>= 1;
	255	reg \|= OFFSET_COARSE;
	256	}
	257
	258	return pcf2123_write_reg(dev, PCF2123_REG_OFFSET, reg);
	259	}
	260
7f3923a1 CV	261	static int pcf2123_rtc_read_time(struct device dev, struct rtc_time tm)
7f3923a1 CV	262	{
66c056d6	263	u8 rxbuf[7];
7f3923a1 CV	264	int ret;
7f3923a1 CV	265
66c056d6	266	ret = pcf2123_read(dev, PCF2123_REG_SC, rxbuf, sizeof(rxbuf));
7f3923a1 CV	267	if (ret < 0)
7f3923a1 CV	268	return ret;
7f3923a1	269
f07fa924 JC	270	if (rxbuf[0] & OSC_HAS_STOPPED) {
	271	dev_info(dev, "clock was stopped. Time is not valid\n");
	272	return -EINVAL;
	273	}
	274
7f3923a1 CV	275	tm->tm_sec = bcd2bin(rxbuf[0] & 0x7F);
	276	tm->tm_min = bcd2bin(rxbuf[1] & 0x7F);
	277	tm->tm_hour = bcd2bin(rxbuf[2] & 0x3F); /* rtc hr 0-23 */
	278	tm->tm_mday = bcd2bin(rxbuf[3] & 0x3F);
	279	tm->tm_wday = rxbuf[4] & 0x07;
	280	tm->tm_mon = bcd2bin(rxbuf[5] & 0x1F) - 1; /* rtc mn 1-12 */
	281	tm->tm_year = bcd2bin(rxbuf[6]);
	282	if (tm->tm_year < 70)
	283	tm->tm_year += 100; /* assume we are in 1970...2069 */
	284
	285	dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
	286	"mday=%d, mon=%d, year=%d, wday=%d\n",
	287	__func__,
	288	tm->tm_sec, tm->tm_min, tm->tm_hour,
	289	tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
	290
821f51c4	291	return rtc_valid_tm(tm);
7f3923a1 CV	292	}
	293
	294	static int pcf2123_rtc_set_time(struct device dev, struct rtc_time tm)
	295	{
7f3923a1 CV	296	u8 txbuf[8];
	297	int ret;
	298
	299	dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
	300	"mday=%d, mon=%d, year=%d, wday=%d\n",
	301	__func__,
	302	tm->tm_sec, tm->tm_min, tm->tm_hour,
	303	tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
	304
	305	/* Stop the counter first */
809b453b	306	ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_STOP);
7f3923a1 CV	307	if (ret < 0)
7f3923a1 CV	308	return ret;
7f3923a1 CV	309
7f3923a1 CV	310	/* Set the new time */
809b453b	311	txbuf[0] = PCF2123_REG_SC;
7f3923a1 CV	312	txbuf[1] = bin2bcd(tm->tm_sec & 0x7F);
	313	txbuf[2] = bin2bcd(tm->tm_min & 0x7F);
	314	txbuf[3] = bin2bcd(tm->tm_hour & 0x3F);
	315	txbuf[4] = bin2bcd(tm->tm_mday & 0x3F);
	316	txbuf[5] = tm->tm_wday & 0x07;
	317	txbuf[6] = bin2bcd((tm->tm_mon + 1) & 0x1F); /* rtc mn 1-12 */
	318	txbuf[7] = bin2bcd(tm->tm_year < 100 ? tm->tm_year : tm->tm_year - 100);
	319
809b453b	320	ret = pcf2123_write(dev, txbuf, sizeof(txbuf));
7f3923a1 CV	321	if (ret < 0)
7f3923a1 CV	322	return ret;
7f3923a1 CV	323
7f3923a1 CV	324	/* Start the counter */
809b453b	325	ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_CLEAR);
7f3923a1 CV	326	if (ret < 0)
7f3923a1 CV	327	return ret;
7f3923a1 CV	328
	329	return 0;
	330	}
	331
1e094b94 JC	332	static int pcf2123_reset(struct device *dev)
	333	{
	334	int ret;
	335	u8 rxbuf[2];
	336
	337	ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_SW_RESET);
	338	if (ret < 0)
	339	return ret;
	340
	341	/* Stop the counter */
	342	dev_dbg(dev, "stopping RTC\n");
	343	ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_STOP);
	344	if (ret < 0)
	345	return ret;
	346
	347	/* See if the counter was actually stopped */
	348	dev_dbg(dev, "checking for presence of RTC\n");
	349	ret = pcf2123_read(dev, PCF2123_REG_CTRL1, rxbuf, sizeof(rxbuf));
	350	if (ret < 0)
	351	return ret;
	352
	353	dev_dbg(dev, "received data from RTC (0x%02X 0x%02X)\n",
	354	rxbuf[0], rxbuf[1]);
	355	if (!(rxbuf[0] & CTRL1_STOP))
	356	return -ENODEV;
	357
	358	/* Start the counter */
	359	ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_CLEAR);
	360	if (ret < 0)
	361	return ret;
	362
	363	return 0;
	364	}
	365
7f3923a1 CV	366	static const struct rtc_class_ops pcf2123_rtc_ops = {
	367	.read_time = pcf2123_rtc_read_time,
	368	.set_time = pcf2123_rtc_set_time,
bae2f647 JC	369	.read_offset = pcf2123_read_offset,
	370	.set_offset = pcf2123_set_offset,
	371
7f3923a1 CV	372	};
7f3923a1 CV	373
5a167f45	374	static int pcf2123_probe(struct spi_device *spi)
7f3923a1 CV	375	{
7f3923a1 CV	376	struct rtc_device *rtc;
f07fa924	377	struct rtc_time tm;
7f3923a1	378	struct pcf2123_plat_data *pdata;
7f3923a1 CV	379	int ret, i;
7f3923a1 CV	380
dd48ccc4 JH	381	pdata = devm_kzalloc(&spi->dev, sizeof(struct pcf2123_plat_data),
dd48ccc4 JH	382	GFP_KERNEL);
7f3923a1 CV	383	if (!pdata)
	384	return -ENOMEM;
	385	spi->dev.platform_data = pdata;
	386
f07fa924	387	ret = pcf2123_rtc_read_time(&spi->dev, &tm);
1e094b94	388	if (ret < 0) {
f07fa924 JC	389	ret = pcf2123_reset(&spi->dev);
	390	if (ret < 0) {
	391	dev_err(&spi->dev, "chip not found\n");
	392	goto kfree_exit;
	393	}
7f3923a1 CV	394	}
7f3923a1 CV	395
7f3923a1 CV	396	dev_info(&spi->dev, "spiclk %u KHz.\n",
	397	(spi->max_speed_hz + 500) / 1000);
	398
7f3923a1	399	/* Finalize the initialization */
dd48ccc4	400	rtc = devm_rtc_device_register(&spi->dev, pcf2123_driver.driver.name,
7f3923a1 CV	401	&pcf2123_rtc_ops, THIS_MODULE);
	402
	403	if (IS_ERR(rtc)) {
	404	dev_err(&spi->dev, "failed to register.\n");
	405	ret = PTR_ERR(rtc);
	406	goto kfree_exit;
	407	}
	408
	409	pdata->rtc = rtc;
	410
	411	for (i = 0; i < 16; i++) {
5ed12f12	412	sysfs_attr_init(&pdata->regs[i].attr.attr);
7f3923a1 CV	413	sprintf(pdata->regs[i].name, "%1x", i);
	414	pdata->regs[i].attr.attr.mode = S_IRUGO \| S_IWUSR;
	415	pdata->regs[i].attr.attr.name = pdata->regs[i].name;
	416	pdata->regs[i].attr.show = pcf2123_show;
	417	pdata->regs[i].attr.store = pcf2123_store;
	418	ret = device_create_file(&spi->dev, &pdata->regs[i].attr);
	419	if (ret) {
	420	dev_err(&spi->dev, "Unable to create sysfs %s\n",
	421	pdata->regs[i].name);
f3d2570a	422	goto sysfs_exit;
7f3923a1 CV	423	}
	424	}
	425
	426	return 0;
f3d2570a CV	427
	428	sysfs_exit:
	429	for (i--; i >= 0; i--)
	430	device_remove_file(&spi->dev, &pdata->regs[i].attr);
	431
7f3923a1	432	kfree_exit:
7f3923a1 CV	433	spi->dev.platform_data = NULL;
	434	return ret;
	435	}
	436
5a167f45	437	static int pcf2123_remove(struct spi_device *spi)
7f3923a1	438	{
ffc75bb8	439	struct pcf2123_plat_data *pdata = dev_get_platdata(&spi->dev);
7f3923a1 CV	440	int i;
	441
	442	if (pdata) {
7f3923a1 CV	443	for (i = 0; i < 16; i++)
	444	if (pdata->regs[i].name[0])
	445	device_remove_file(&spi->dev,
	446	&pdata->regs[i].attr);
7f3923a1 CV	447	}
	448
	449	return 0;
	450	}
	451
3fc70077 JC	452	#ifdef CONFIG_OF
	453	static const struct of_device_id pcf2123_dt_ids[] = {
	454	{ .compatible = "nxp,rtc-pcf2123", },
	455	{ /* sentinel */ }
	456	};
	457	MODULE_DEVICE_TABLE(of, pcf2123_dt_ids);
	458	#endif
	459
7f3923a1 CV	460	static struct spi_driver pcf2123_driver = {
	461	.driver = {
	462	.name = "rtc-pcf2123",
3fc70077	463	.of_match_table = of_match_ptr(pcf2123_dt_ids),
7f3923a1 CV	464	},
7f3923a1 CV	465	.probe = pcf2123_probe,
5a167f45	466	.remove = pcf2123_remove,
7f3923a1 CV	467	};
7f3923a1 CV	468
109e9418	469	module_spi_driver(pcf2123_driver);
7f3923a1 CV	470
	471	MODULE_AUTHOR("Chris Verges <chrisv@cyberswitching.com>");
	472	MODULE_DESCRIPTION("NXP PCF2123 RTC driver");
	473	MODULE_LICENSE("GPL");