[linux-2.6-block.git] / drivers / pinctrl / Kconfig

#
# PINCTRL infrastructure and drivers
#

menuconfig PINCTRL
	bool "Pin controllers"

if PINCTRL

config GENERIC_PINCTRL_GROUPS
	bool

config PINMUX
	bool "Support pin multiplexing controllers" if COMPILE_TEST

config GENERIC_PINMUX_FUNCTIONS
	bool
	select PINMUX

config PINCONF
	bool "Support pin configuration controllers" if COMPILE_TEST

config GENERIC_PINCONF
	bool
	select PINCONF

config DEBUG_PINCTRL
	bool "Debug PINCTRL calls"
	depends on DEBUG_KERNEL
	help
	  Say Y here to add some extra checks and diagnostics to PINCTRL calls.

config PINCTRL_ARTPEC6
        bool "Axis ARTPEC-6 pin controller driver"
        depends on MACH_ARTPEC6
        select PINMUX
        select GENERIC_PINCONF
        help
          This is the driver for the Axis ARTPEC-6 pin controller. This driver
          supports pin function multiplexing as well as pin bias and drive
          strength configuration. Device tree integration instructions can be
          found in Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt

config PINCTRL_AS3722
	tristate "Pinctrl and GPIO driver for ams AS3722 PMIC"
	depends on MFD_AS3722 && GPIOLIB
	select PINMUX
	select GENERIC_PINCONF
	help
	  AS3722 device supports the configuration of GPIO pins for different
	  functionality. This driver supports the pinmux, push-pull and
	  open drain configuration for the GPIO pins of AS3722 devices. It also
	  supports the GPIO functionality through gpiolib.

config PINCTRL_AXP209
	tristate "X-Powers AXP209 PMIC pinctrl and GPIO Support"
	depends on MFD_AXP20X
	depends on OF
	select PINMUX
	select GENERIC_PINCONF
	select GPIOLIB
	help
	  AXP PMICs provides multiple GPIOs that can be muxed for different
	  functions. This driver bundles a pinctrl driver to select the function
	  muxing and a GPIO driver to handle the GPIO when the GPIO function is
	  selected.
	  Say yes to enable pinctrl and GPIO support for the AXP209 PMIC

config PINCTRL_AT91
	bool "AT91 pinctrl driver"
	depends on OF
	depends on ARCH_AT91
	select PINMUX
	select PINCONF
	select GPIOLIB
	select OF_GPIO
	select GPIOLIB_IRQCHIP
	help
	  Say Y here to enable the at91 pinctrl driver

config PINCTRL_AT91PIO4
	bool "AT91 PIO4 pinctrl driver"
	depends on OF
	depends on ARCH_AT91
	select PINMUX
	select GENERIC_PINCONF
	select GPIOLIB
	select GPIOLIB_IRQCHIP
	select OF_GPIO
	help
	  Say Y here to enable the at91 pinctrl/gpio driver for Atmel PIO4
	  controller available on sama5d2 SoC.

config PINCTRL_AMD
	tristate "AMD GPIO pin control"
	depends on HAS_IOMEM
	select GPIOLIB
	select GPIOLIB_IRQCHIP
	select PINMUX
	select PINCONF
	select GENERIC_PINCONF
	help
	  driver for memory mapped GPIO functionality on AMD platforms
	  (x86 or arm).Most pins are usually muxed to some other
	  functionality by firmware,so only a small amount is available
	  for gpio use.

	  Requires ACPI/FDT device enumeration code to set up a platform
	  device.

config PINCTRL_DA850_PUPD
	tristate "TI DA850/OMAP-L138/AM18XX pullup/pulldown groups"
	depends on OF && (ARCH_DAVINCI_DA850 || COMPILE_TEST)
	select PINCONF
	select GENERIC_PINCONF
	help
	  Driver for TI DA850/OMAP-L138/AM18XX pinconf. Used to control
	  pullup/pulldown pin groups.

config PINCTRL_DIGICOLOR
	bool
	depends on OF && (ARCH_DIGICOLOR || COMPILE_TEST)
	select PINMUX
	select GENERIC_PINCONF

config PINCTRL_LANTIQ
	bool
	depends on LANTIQ
	select PINMUX
	select PINCONF

config PINCTRL_LPC18XX
	bool "NXP LPC18XX/43XX SCU pinctrl driver"
	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
	default ARCH_LPC18XX
	select PINMUX
	select GENERIC_PINCONF
	help
	  Pinctrl driver for NXP LPC18xx/43xx System Control Unit (SCU).

config PINCTRL_FALCON
	bool
	depends on SOC_FALCON
	depends on PINCTRL_LANTIQ

config PINCTRL_GEMINI
	bool
	depends on ARCH_GEMINI
	default ARCH_GEMINI
	select PINMUX
	select GENERIC_PINCONF
	select MFD_SYSCON

config PINCTRL_MCP23S08
	tristate "Microchip MCP23xxx I/O expander"
	depends on SPI_MASTER || I2C
	depends on I2C || I2C=n
	select GPIOLIB
	select GPIOLIB_IRQCHIP
	select REGMAP_I2C if I2C
	select REGMAP_SPI if SPI_MASTER
	select GENERIC_PINCONF
	help
	  SPI/I2C driver for Microchip MCP23S08 / MCP23S17 / MCP23S18 /
	  MCP23008 / MCP23017 / MCP23018 I/O expanders.
	  This provides a GPIO interface supporting inputs and outputs and a
	  corresponding interrupt-controller.

config PINCTRL_OXNAS
	bool
	depends on OF
	select PINMUX
	select PINCONF
	select GENERIC_PINCONF
	select GPIOLIB
	select OF_GPIO
	select GPIOLIB_IRQCHIP
	select MFD_SYSCON

config PINCTRL_ROCKCHIP
	bool
	select PINMUX
	select GENERIC_PINCONF
	select GENERIC_IRQ_CHIP
	select MFD_SYSCON

config PINCTRL_RZA1
	bool "Renesas RZ/A1 gpio and pinctrl driver"
	depends on OF
	depends on ARCH_R7S72100 || COMPILE_TEST
	select GPIOLIB
	select GENERIC_PINCTRL_GROUPS
	select GENERIC_PINMUX_FUNCTIONS
	select GENERIC_PINCONF
	help
	  This selects pinctrl driver for Renesas RZ/A1 platforms.

config PINCTRL_RZN1
	bool "Renesas RZ/N1 pinctrl driver"
	depends on OF
	depends on ARCH_RZN1 || COMPILE_TEST
	select GENERIC_PINCTRL_GROUPS
	select GENERIC_PINMUX_FUNCTIONS
	select GENERIC_PINCONF
	help
	  This selects pinctrl driver for Renesas RZ/N1 devices.

config PINCTRL_SINGLE
	tristate "One-register-per-pin type device tree based pinctrl driver"
	depends on OF
	depends on HAS_IOMEM
	select GENERIC_PINCTRL_GROUPS
	select GENERIC_PINMUX_FUNCTIONS
	select GENERIC_PINCONF
	help
	  This selects the device tree based generic pinctrl driver.

config PINCTRL_SIRF
	bool "CSR SiRFprimaII pin controller driver"
	depends on ARCH_SIRF
	select PINMUX
	select PINCONF
	select GENERIC_PINCONF
	select GPIOLIB_IRQCHIP

config PINCTRL_SX150X
	bool "Semtech SX150x I2C GPIO expander pinctrl driver"
	depends on I2C=y
	select PINMUX
	select PINCONF
	select GENERIC_PINCONF
	select GPIOLIB
	select GPIOLIB_IRQCHIP
	select REGMAP
	help
	  Say yes here to provide support for Semtech SX150x-series I2C
	  GPIO expanders as pinctrl module.
	  Compatible models include:
	  - 8 bits:  sx1508q, sx1502q
	  - 16 bits: sx1509q, sx1506q

config PINCTRL_PISTACHIO
	def_bool y if MACH_PISTACHIO
	depends on GPIOLIB
	select PINMUX
	select GENERIC_PINCONF
	select GPIOLIB_IRQCHIP
	select OF_GPIO

config PINCTRL_ST
	bool
	depends on OF
	select PINMUX
	select PINCONF
	select GPIOLIB_IRQCHIP

config PINCTRL_U300
	bool "U300 pin controller driver"
	depends on ARCH_U300
	select PINMUX
	select GENERIC_PINCONF

config PINCTRL_COH901
	bool "ST-Ericsson U300 COH 901 335/571 GPIO"
	depends on GPIOLIB && ARCH_U300 && PINCTRL_U300
	select GPIOLIB_IRQCHIP
	help
	  Say yes here to support GPIO interface on ST-Ericsson U300.
	  The names of the two IP block variants supported are
	  COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
	  ports of 8 GPIO pins each.

config PINCTRL_MAX77620
	tristate "MAX77620/MAX20024 Pincontrol support"
	depends on MFD_MAX77620 && OF
	select PINMUX
	select GENERIC_PINCONF
	help
	  Say Yes here to enable Pin control support for Maxim PMIC MAX77620.
	  This PMIC has 8 GPIO pins that work as GPIO as well as special
	  function in alternate mode. This driver also configure push-pull,
	  open drain, FPS slots etc.

config PINCTRL_PALMAS
	tristate "Pinctrl driver for the PALMAS Series MFD devices"
	depends on OF && MFD_PALMAS
	select PINMUX
	select GENERIC_PINCONF
	help
	  Palmas device supports the configuration of pins for different
	  functionality. This driver supports the pinmux, push-pull and
	  open drain configuration for the Palmas series devices like
	  TPS65913, TPS80036 etc.

config PINCTRL_PIC32
	bool "Microchip PIC32 pin controller driver"
	depends on OF
	depends on MACH_PIC32
	select PINMUX
	select GENERIC_PINCONF
	select GPIOLIB_IRQCHIP
	select OF_GPIO
	help
	  This is the pin controller and gpio driver for Microchip PIC32
	  microcontrollers. This option is selected automatically when specific
	  machine and arch are selected to build.

config PINCTRL_PIC32MZDA
	def_bool y if PIC32MZDA
	select PINCTRL_PIC32

config PINCTRL_ZYNQ
	bool "Pinctrl driver for Xilinx Zynq"
	depends on ARCH_ZYNQ
	select PINMUX
	select GENERIC_PINCONF
	help
	  This selects the pinctrl driver for Xilinx Zynq.

config PINCTRL_INGENIC
	bool "Pinctrl driver for the Ingenic JZ47xx SoCs"
	default MACH_INGENIC
	depends on OF
	depends on MIPS || COMPILE_TEST
	select GENERIC_PINCONF
	select GENERIC_PINCTRL_GROUPS
	select GENERIC_PINMUX_FUNCTIONS
	select GPIOLIB
	select GPIOLIB_IRQCHIP
	select REGMAP_MMIO

config PINCTRL_RK805
	tristate "Pinctrl and GPIO driver for RK805 PMIC"
	depends on MFD_RK808
	select GPIOLIB
	select PINMUX
	select GENERIC_PINCONF
	help
	  This selects the pinctrl driver for RK805.

config PINCTRL_OCELOT
	bool "Pinctrl driver for the Microsemi Ocelot SoCs"
	default y
	depends on OF
	depends on MSCC_OCELOT || COMPILE_TEST
	select GPIOLIB
	select GPIOLIB_IRQCHIP
	select GENERIC_PINCONF
	select GENERIC_PINCTRL_GROUPS
	select GENERIC_PINMUX_FUNCTIONS
	select REGMAP_MMIO

source "drivers/pinctrl/actions/Kconfig"
source "drivers/pinctrl/aspeed/Kconfig"
source "drivers/pinctrl/bcm/Kconfig"
source "drivers/pinctrl/berlin/Kconfig"
source "drivers/pinctrl/freescale/Kconfig"
source "drivers/pinctrl/intel/Kconfig"
source "drivers/pinctrl/mvebu/Kconfig"
source "drivers/pinctrl/nomadik/Kconfig"
source "drivers/pinctrl/nuvoton/Kconfig"
source "drivers/pinctrl/pxa/Kconfig"
source "drivers/pinctrl/qcom/Kconfig"
source "drivers/pinctrl/samsung/Kconfig"
source "drivers/pinctrl/sh-pfc/Kconfig"
source "drivers/pinctrl/spear/Kconfig"
source "drivers/pinctrl/sprd/Kconfig"
source "drivers/pinctrl/stm32/Kconfig"
source "drivers/pinctrl/sunxi/Kconfig"
source "drivers/pinctrl/tegra/Kconfig"
source "drivers/pinctrl/ti/Kconfig"
source "drivers/pinctrl/uniphier/Kconfig"
source "drivers/pinctrl/vt8500/Kconfig"
source "drivers/pinctrl/mediatek/Kconfig"
source "drivers/pinctrl/zte/Kconfig"
source "drivers/pinctrl/meson/Kconfig"
source "drivers/pinctrl/cirrus/Kconfig"

config PINCTRL_XWAY
	bool
	depends on SOC_TYPE_XWAY
	depends on PINCTRL_LANTIQ

config PINCTRL_TB10X
	bool
	depends on OF && ARC_PLAT_TB10X
	select GPIOLIB

endif
Commit	Line	Data
2744e8af LW	1	#
	2	# PINCTRL infrastructure and drivers
	3	#
	4
d219b924 PR	5	menuconfig PINCTRL
d219b924 PR	6	bool "Pin controllers"
2744e8af	7
d219b924	8	if PINCTRL
45f034ef	9
c033a718	10	config GENERIC_PINCTRL_GROUPS
c7059c5a TL	11	bool
c7059c5a TL	12
2744e8af	13	config PINMUX
244e95a7	14	bool "Support pin multiplexing controllers" if COMPILE_TEST
ae6b4d85	15
a76edc89 TL	16	config GENERIC_PINMUX_FUNCTIONS
	17	bool
	18	select PINMUX
	19
ae6b4d85	20	config PINCONF
244e95a7	21	bool "Support pin configuration controllers" if COMPILE_TEST
2744e8af	22
394349f7 LW	23	config GENERIC_PINCONF
	24	bool
	25	select PINCONF
	26
2744e8af LW	27	config DEBUG_PINCTRL
	28	bool "Debug PINCTRL calls"
	29	depends on DEBUG_KERNEL
	30	help
	31	Say Y here to add some extra checks and diagnostics to PINCTRL calls.
	32
00df0582 JN	33	config PINCTRL_ARTPEC6
	34	bool "Axis ARTPEC-6 pin controller driver"
	35	depends on MACH_ARTPEC6
	36	select PINMUX
	37	select GENERIC_PINCONF
	38	help
	39	This is the driver for the Axis ARTPEC-6 pin controller. This driver
	40	supports pin function multiplexing as well as pin bias and drive
	41	strength configuration. Device tree integration instructions can be
	42	found in Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt
	43
c8ce8782	44	config PINCTRL_AS3722
9385f35d	45	tristate "Pinctrl and GPIO driver for ams AS3722 PMIC"
c8ce8782 LD	46	depends on MFD_AS3722 && GPIOLIB
	47	select PINMUX
	48	select GENERIC_PINCONF
	49	help
	50	AS3722 device supports the configuration of GPIO pins for different
	51	functionality. This driver supports the pinmux, push-pull and
	52	open drain configuration for the GPIO pins of AS3722 devices. It also
	53	supports the GPIO functionality through gpiolib.
	54
449317a8 QS	55	config PINCTRL_AXP209
	56	tristate "X-Powers AXP209 PMIC pinctrl and GPIO Support"
	57	depends on MFD_AXP20X
971f1b38 QS	58	depends on OF
	59	select PINMUX
	60	select GENERIC_PINCONF
	61	select GPIOLIB
449317a8 QS	62	help
	63	AXP PMICs provides multiple GPIOs that can be muxed for different
	64	functions. This driver bundles a pinctrl driver to select the function
	65	muxing and a GPIO driver to handle the GPIO when the GPIO function is
	66	selected.
	67	Say yes to enable pinctrl and GPIO support for the AXP209 PMIC
	68
6732ae5c JCPV	69	config PINCTRL_AT91
	70	bool "AT91 pinctrl driver"
	71	depends on OF
	72	depends on ARCH_AT91
	73	select PINMUX
	74	select PINCONF
80cc3732 AS	75	select GPIOLIB
	76	select OF_GPIO
	77	select GPIOLIB_IRQCHIP
6732ae5c JCPV	78	help
	79	Say Y here to enable the at91 pinctrl driver
	80
77618084 LD	81	config PINCTRL_AT91PIO4
	82	bool "AT91 PIO4 pinctrl driver"
	83	depends on OF
	84	depends on ARCH_AT91
	85	select PINMUX
	86	select GENERIC_PINCONF
	87	select GPIOLIB
	88	select GPIOLIB_IRQCHIP
	89	select OF_GPIO
	90	help
	91	Say Y here to enable the at91 pinctrl/gpio driver for Atmel PIO4
	92	controller available on sama5d2 SoC.
	93
dbad75dd	94	config PINCTRL_AMD
337ea0fb	95	tristate "AMD GPIO pin control"
fd35b202	96	depends on HAS_IOMEM
e2a021d4	97	select GPIOLIB
dbad75dd	98	select GPIOLIB_IRQCHIP
83b31c2a	99	select PINMUX
dbad75dd KX	100	select PINCONF
	101	select GENERIC_PINCONF
	102	help
	103	driver for memory mapped GPIO functionality on AMD platforms
	104	(x86 or arm).Most pins are usually muxed to some other
	105	functionality by firmware,so only a small amount is available
	106	for gpio use.
	107
	108	Requires ACPI/FDT device enumeration code to set up a platform
	109	device.
	110
1ff91f0a DL	111	config PINCTRL_DA850_PUPD
	112	tristate "TI DA850/OMAP-L138/AM18XX pullup/pulldown groups"
	113	depends on OF && (ARCH_DAVINCI_DA850 \|\| COMPILE_TEST)
	114	select PINCONF
	115	select GENERIC_PINCONF
	116	help
	117	Driver for TI DA850/OMAP-L138/AM18XX pinconf. Used to control
	118	pullup/pulldown pin groups.
	119
38b0e507 BS	120	config PINCTRL_DIGICOLOR
	121	bool
	122	depends on OF && (ARCH_DIGICOLOR \|\| COMPILE_TEST)
	123	select PINMUX
	124	select GENERIC_PINCONF
	125
3f8c50c9 JC	126	config PINCTRL_LANTIQ
	127	bool
	128	depends on LANTIQ
	129	select PINMUX
	130	select PINCONF
	131
2f77ac93 JE	132	config PINCTRL_LPC18XX
	133	bool "NXP LPC18XX/43XX SCU pinctrl driver"
	134	depends on OF && (ARCH_LPC18XX \|\| COMPILE_TEST)
	135	default ARCH_LPC18XX
	136	select PINMUX
	137	select GENERIC_PINCONF
	138	help
	139	Pinctrl driver for NXP LPC18xx/43xx System Control Unit (SCU).
	140
e316cb2b JC	141	config PINCTRL_FALCON
	142	bool
	143	depends on SOC_FALCON
	144	depends on PINCTRL_LANTIQ
	145
06351d13 LW	146	config PINCTRL_GEMINI
	147	bool
	148	depends on ARCH_GEMINI
	149	default ARCH_GEMINI
	150	select PINMUX
1c5b7f3c	151	select GENERIC_PINCONF
06351d13 LW	152	select MFD_SYSCON
06351d13 LW	153
64ac43e6 SR	154	config PINCTRL_MCP23S08
64ac43e6 SR	155	tristate "Microchip MCP23xxx I/O expander"
64ac43e6	156	depends on SPI_MASTER \|\| I2C
adeac775	157	depends on I2C \|\| I2C=n
e2a021d4	158	select GPIOLIB
64ac43e6 SR	159	select GPIOLIB_IRQCHIP
	160	select REGMAP_I2C if I2C
	161	select REGMAP_SPI if SPI_MASTER
82039d24	162	select GENERIC_PINCONF
64ac43e6	163	help
6ff45566 JK	164	SPI/I2C driver for Microchip MCP23S08 / MCP23S17 / MCP23S18 /
	165	MCP23008 / MCP23017 / MCP23018 I/O expanders.
	166	This provides a GPIO interface supporting inputs and outputs and a
	167	corresponding interrupt-controller.
64ac43e6	168
611dac1e NA	169	config PINCTRL_OXNAS
	170	bool
	171	depends on OF
	172	select PINMUX
	173	select PINCONF
	174	select GENERIC_PINCONF
	175	select GPIOLIB
	176	select OF_GPIO
	177	select GPIOLIB_IRQCHIP
	178	select MFD_SYSCON
	179
d3e51161 HS	180	config PINCTRL_ROCKCHIP
	181	bool
	182	select PINMUX
	183	select GENERIC_PINCONF
	184	select GENERIC_IRQ_CHIP
751a99ab	185	select MFD_SYSCON
d3e51161	186
5a49b644 JM	187	config PINCTRL_RZA1
	188	bool "Renesas RZ/A1 gpio and pinctrl driver"
	189	depends on OF
	190	depends on ARCH_R7S72100 \|\| COMPILE_TEST
	191	select GPIOLIB
	192	select GENERIC_PINCTRL_GROUPS
	193	select GENERIC_PINMUX_FUNCTIONS
	194	select GENERIC_PINCONF
	195	help
	196	This selects pinctrl driver for Renesas RZ/A1 platforms.
	197
4e53b500 PE	198	config PINCTRL_RZN1
	199	bool "Renesas RZ/N1 pinctrl driver"
	200	depends on OF
	201	depends on ARCH_RZN1 \|\| COMPILE_TEST
	202	select GENERIC_PINCTRL_GROUPS
	203	select GENERIC_PINMUX_FUNCTIONS
	204	select GENERIC_PINCONF
	205	help
	206	This selects pinctrl driver for Renesas RZ/N1 devices.
	207
8b8b091b TL	208	config PINCTRL_SINGLE
	209	tristate "One-register-per-pin type device tree based pinctrl driver"
	210	depends on OF
fd35b202	211	depends on HAS_IOMEM
caeb774e	212	select GENERIC_PINCTRL_GROUPS
571aec4d	213	select GENERIC_PINMUX_FUNCTIONS
9dddb4df	214	select GENERIC_PINCONF
8b8b091b TL	215	help
	216	This selects the device tree based generic pinctrl driver.
	217
3bece55a	218	config PINCTRL_SIRF
a17272a4	219	bool "CSR SiRFprimaII pin controller driver"
d3e26f2f	220	depends on ARCH_SIRF
393daa81	221	select PINMUX
f9367793 WC	222	select PINCONF
f9367793 WC	223	select GENERIC_PINCONF
7420d2d0	224	select GPIOLIB_IRQCHIP
393daa81	225
9e80f906 NA	226	config PINCTRL_SX150X
9e80f906 NA	227	bool "Semtech SX150x I2C GPIO expander pinctrl driver"
e2a021d4	228	depends on I2C=y
9e80f906 NA	229	select PINMUX
	230	select PINCONF
	231	select GENERIC_PINCONF
e2a021d4	232	select GPIOLIB
9e80f906	233	select GPIOLIB_IRQCHIP
0db0f26c	234	select REGMAP
9e80f906 NA	235	help
	236	Say yes here to provide support for Semtech SX150x-series I2C
	237	GPIO expanders as pinctrl module.
	238	Compatible models include:
	239	- 8 bits: sx1508q, sx1502q
	240	- 16 bits: sx1509q, sx1506q
	241
cefc03e5 AB	242	config PINCTRL_PISTACHIO
	243	def_bool y if MACH_PISTACHIO
	244	depends on GPIOLIB
	245	select PINMUX
	246	select GENERIC_PINCONF
	247	select GPIOLIB_IRQCHIP
	248	select OF_GPIO
	249
701016c0 SK	250	config PINCTRL_ST
	251	bool
	252	depends on OF
	253	select PINMUX
	254	select PINCONF
130cbe30	255	select GPIOLIB_IRQCHIP
701016c0	256
3bece55a LW	257	config PINCTRL_U300
3bece55a LW	258	bool "U300 pin controller driver"
98da3529 LW	259	depends on ARCH_U300
98da3529 LW	260	select PINMUX
dc0b1aa3	261	select GENERIC_PINCONF
45f034ef	262
ca402d37 LW	263	config PINCTRL_COH901
ca402d37 LW	264	bool "ST-Ericsson U300 COH 901 335/571 GPIO"
3c94d1bb	265	depends on GPIOLIB && ARCH_U300 && PINCTRL_U300
523dcce7	266	select GPIOLIB_IRQCHIP
ca402d37 LW	267	help
	268	Say yes here to support GPIO interface on ST-Ericsson U300.
	269	The names of the two IP block variants supported are
	270	COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
	271	ports of 8 GPIO pins each.
	272
2df723d4 LD	273	config PINCTRL_MAX77620
2df723d4 LD	274	tristate "MAX77620/MAX20024 Pincontrol support"
24d6a91c	275	depends on MFD_MAX77620 && OF
79f28b9f	276	select PINMUX
2df723d4 LD	277	select GENERIC_PINCONF
	278	help
	279	Say Yes here to enable Pin control support for Maxim PMIC MAX77620.
	280	This PMIC has 8 GPIO pins that work as GPIO as well as special
	281	function in alternate mode. This driver also configure push-pull,
	282	open drain, FPS slots etc.
	283
0a8d3e24	284	config PINCTRL_PALMAS
767b8ce3	285	tristate "Pinctrl driver for the PALMAS Series MFD devices"
0a8d3e24	286	depends on OF && MFD_PALMAS
63ca8db7	287	select PINMUX
0a8d3e24 LD	288	select GENERIC_PINCONF
	289	help
	290	Palmas device supports the configuration of pins for different
	291	functionality. This driver supports the pinmux, push-pull and
	292	open drain configuration for the Palmas series devices like
	293	TPS65913, TPS80036 etc.
	294
2ba384e6 JH	295	config PINCTRL_PIC32
	296	bool "Microchip PIC32 pin controller driver"
	297	depends on OF
	298	depends on MACH_PIC32
	299	select PINMUX
	300	select GENERIC_PINCONF
	301	select GPIOLIB_IRQCHIP
	302	select OF_GPIO
	303	help
	304	This is the pin controller and gpio driver for Microchip PIC32
	305	microcontrollers. This option is selected automatically when specific
	306	machine and arch are selected to build.
	307
	308	config PINCTRL_PIC32MZDA
	309	def_bool y if PIC32MZDA
	310	select PINCTRL_PIC32
	311
add958ce SB	312	config PINCTRL_ZYNQ
	313	bool "Pinctrl driver for Xilinx Zynq"
	314	depends on ARCH_ZYNQ
	315	select PINMUX
	316	select GENERIC_PINCONF
	317	help
485dba27	318	This selects the pinctrl driver for Xilinx Zynq.
add958ce	319
b5c23aa4 PC	320	config PINCTRL_INGENIC
b5c23aa4 PC	321	bool "Pinctrl driver for the Ingenic JZ47xx SoCs"
635c20a1	322	default MACH_INGENIC
c504985e	323	depends on OF
635c20a1	324	depends on MIPS \|\| COMPILE_TEST
b5c23aa4 PC	325	select GENERIC_PINCONF
	326	select GENERIC_PINCTRL_GROUPS
	327	select GENERIC_PINMUX_FUNCTIONS
e72394e2 PC	328	select GPIOLIB
e72394e2 PC	329	select GPIOLIB_IRQCHIP
b5c23aa4 PC	330	select REGMAP_MMIO
b5c23aa4 PC	331
ea479996 JC	332	config PINCTRL_RK805
	333	tristate "Pinctrl and GPIO driver for RK805 PMIC"
	334	depends on MFD_RK808
	335	select GPIOLIB
	336	select PINMUX
	337	select GENERIC_PINCONF
	338	help
	339	This selects the pinctrl driver for RK805.
	340
ce8dc094 AB	341	config PINCTRL_OCELOT
	342	bool "Pinctrl driver for the Microsemi Ocelot SoCs"
	343	default y
	344	depends on OF
	345	depends on MSCC_OCELOT \|\| COMPILE_TEST
	346	select GPIOLIB
be36abb7	347	select GPIOLIB_IRQCHIP
ce8dc094 AB	348	select GENERIC_PINCONF
	349	select GENERIC_PINCTRL_GROUPS
	350	select GENERIC_PINMUX_FUNCTIONS
	351	select REGMAP_MMIO
	352
2242ddfb	353	source "drivers/pinctrl/actions/Kconfig"
4d3d0e42	354	source "drivers/pinctrl/aspeed/Kconfig"
b17f2f9b	355	source "drivers/pinctrl/bcm/Kconfig"
3de68d33	356	source "drivers/pinctrl/berlin/Kconfig"
edad3b2a	357	source "drivers/pinctrl/freescale/Kconfig"
5fae8b86	358	source "drivers/pinctrl/intel/Kconfig"
06763c74	359	source "drivers/pinctrl/mvebu/Kconfig"
3a198059	360	source "drivers/pinctrl/nomadik/Kconfig"
3b588e43	361	source "drivers/pinctrl/nuvoton/Kconfig"
4b15ec9d	362	source "drivers/pinctrl/pxa/Kconfig"
69b78b8d	363	source "drivers/pinctrl/qcom/Kconfig"
ebe629a3	364	source "drivers/pinctrl/samsung/Kconfig"
6e54d8d2	365	source "drivers/pinctrl/sh-pfc/Kconfig"
deda8287	366	source "drivers/pinctrl/spear/Kconfig"
41d32cfc	367	source "drivers/pinctrl/sprd/Kconfig"
aceb16dc	368	source "drivers/pinctrl/stm32/Kconfig"
5f910777	369	source "drivers/pinctrl/sunxi/Kconfig"
25cbac77	370	source "drivers/pinctrl/tegra/Kconfig"
003910eb	371	source "drivers/pinctrl/ti/Kconfig"
6e908892	372	source "drivers/pinctrl/uniphier/Kconfig"
170c6152	373	source "drivers/pinctrl/vt8500/Kconfig"
a6df410d	374	source "drivers/pinctrl/mediatek/Kconfig"
cbff0c4d	375	source "drivers/pinctrl/zte/Kconfig"
277d14eb	376	source "drivers/pinctrl/meson/Kconfig"
218d72a7	377	source "drivers/pinctrl/cirrus/Kconfig"
deda8287	378
3f8c50c9 JC	379	config PINCTRL_XWAY
	380	bool
	381	depends on SOC_TYPE_XWAY
	382	depends on PINCTRL_LANTIQ
	383
5aad0db1 CR	384	config PINCTRL_TB10X
5aad0db1 CR	385	bool
b99e6fb8 LW	386	depends on OF && ARC_PLAT_TB10X
b99e6fb8 LW	387	select GPIOLIB
5aad0db1	388
d219b924	389	endif