projects / linux-2.6-block.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski...
[linux-2.6-block.git] / drivers / net / hamradio / baycom_epp.c
CommitLineData
1da177e4
LT		 1/*****************************************************************************/
2
3/*
4 * baycom_epp.c -- baycom epp radio modem driver.
5 *
6 * Copyright (C) 1998-2000
7 * Thomas Sailer (sailer@ife.ee.ethz.ch)
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 *
23 * Please note that the GPL allows you to use the driver, NOT the radio.
24 * In order to use the radio, you need a license from the communications
25 * authority of your country.
26 *
27 *
28 * History:
29 * 0.1 xx.xx.1998 Initial version by Matthias Welwarsky (dg2fef)
30 * 0.2 21.04.1998 Massive rework by Thomas Sailer
31 * Integrated FPGA EPP modem configuration routines
32 * 0.3 11.05.1998 Took FPGA config out and moved it into a separate program
33 * 0.4 26.07.1999 Adapted to new lowlevel parport driver interface
34 * 0.5 03.08.1999 adapt to Linus' new __setup/__initcall
35 * removed some pre-2.2 kernel compatibility cruft
36 * 0.6 10.08.1999 Check if parport can do SPP and is safe to access during interrupt contexts
37 * 0.7 12.02.2000 adapted to softnet driver interface
38 *
39 */
40
41/*****************************************************************************/
42
c4bc7ee2 43#include <linux/crc-ccitt.h>
1da177e4
LT		 44#include <linux/module.h>
45#include <linux/kernel.h>
46#include <linux/init.h>
d43c36dc 47#include <linux/sched.h>
1da177e4
LT		 48#include <linux/string.h>
49#include <linux/workqueue.h>
50#include <linux/fs.h>
51#include <linux/parport.h>
1da177e4 52#include <linux/if_arp.h>
1da177e4
LT		 53#include <linux/hdlcdrv.h>
54#include <linux/baycom.h>
cd8749b4 55#include <linux/jiffies.h>
8b5b4671 56#include <linux/random.h>
1da177e4 57#include <net/ax25.h>
c4bc7ee2 58#include <asm/uaccess.h>
1da177e4
LT		 59
60/* --------------------------------------------------------------------- */
61
62#define BAYCOM_DEBUG
63#define BAYCOM_MAGIC 19730510
64
65/* --------------------------------------------------------------------- */
66
67static const char paranoia_str[] = KERN_ERR
68 "baycom_epp: bad magic number for hdlcdrv_state struct in routine %s\n";
69
70static const char bc_drvname[] = "baycom_epp";
71static const char bc_drvinfo[] = KERN_INFO "baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA\n"
c1afba3c 72"baycom_epp: version 0.7\n";
1da177e4
LT		 73
74/* --------------------------------------------------------------------- */
75
76#define NR_PORTS 4
77
78static struct net_device *baycom_device[NR_PORTS];
79
80/* --------------------------------------------------------------------- */
81
82/* EPP status register */
83#define EPP_DCDBIT 0x80
84#define EPP_PTTBIT 0x08
85#define EPP_NREF 0x01
86#define EPP_NRAEF 0x02
87#define EPP_NRHF 0x04
88#define EPP_NTHF 0x20
89#define EPP_NTAEF 0x10
90#define EPP_NTEF EPP_PTTBIT
91
92/* EPP control register */
93#define EPP_TX_FIFO_ENABLE 0x10
94#define EPP_RX_FIFO_ENABLE 0x08
95#define EPP_MODEM_ENABLE 0x20
96#define EPP_LEDS 0xC0
97#define EPP_IRQ_ENABLE 0x10
98
99/* LPT registers */
100#define LPTREG_ECONTROL 0x402
101#define LPTREG_CONFIGB 0x401
102#define LPTREG_CONFIGA 0x400
103#define LPTREG_EPPDATA 0x004
104#define LPTREG_EPPADDR 0x003
105#define LPTREG_CONTROL 0x002
106#define LPTREG_STATUS 0x001
107#define LPTREG_DATA 0x000
108
109/* LPT control register */
110#define LPTCTRL_PROGRAM 0x04 /* 0 to reprogram */
111#define LPTCTRL_WRITE 0x01
112#define LPTCTRL_ADDRSTB 0x08
113#define LPTCTRL_DATASTB 0x02
114#define LPTCTRL_INTEN 0x10
115
116/* LPT status register */
117#define LPTSTAT_SHIFT_NINTR 6
118#define LPTSTAT_WAIT 0x80
119#define LPTSTAT_NINTR (1<<LPTSTAT_SHIFT_NINTR)
120#define LPTSTAT_PE 0x20
121#define LPTSTAT_DONE 0x10
122#define LPTSTAT_NERROR 0x08
123#define LPTSTAT_EPPTIMEOUT 0x01
124
125/* LPT data register */
126#define LPTDATA_SHIFT_TDI 0
127#define LPTDATA_SHIFT_TMS 2
128#define LPTDATA_TDI (1<<LPTDATA_SHIFT_TDI)
129#define LPTDATA_TCK 0x02
130#define LPTDATA_TMS (1<<LPTDATA_SHIFT_TMS)
131#define LPTDATA_INITBIAS 0x80
132
133
134/* EPP modem config/status bits */
135#define EPP_DCDBIT 0x80
136#define EPP_PTTBIT 0x08
137#define EPP_RXEBIT 0x01
138#define EPP_RXAEBIT 0x02
139#define EPP_RXHFULL 0x04
140
141#define EPP_NTHF 0x20
142#define EPP_NTAEF 0x10
143#define EPP_NTEF EPP_PTTBIT
144
145#define EPP_TX_FIFO_ENABLE 0x10
146#define EPP_RX_FIFO_ENABLE 0x08
147#define EPP_MODEM_ENABLE 0x20
148#define EPP_LEDS 0xC0
149#define EPP_IRQ_ENABLE 0x10
150
151/* Xilinx 4k JTAG instructions */
152#define XC4K_IRLENGTH 3
153#define XC4K_EXTEST 0
154#define XC4K_PRELOAD 1
155#define XC4K_CONFIGURE 5
156#define XC4K_BYPASS 7
157
158#define EPP_CONVENTIONAL 0
159#define EPP_FPGA 1
160#define EPP_FPGAEXTSTATUS 2
161
162#define TXBUFFER_SIZE ((HDLCDRV_MAXFLEN*6/5)+8)
163
164/* ---------------------------------------------------------------------- */
165/*
166 * Information that need to be kept for each board.
167 */
168
169struct baycom_state {
170 int magic;
171
172 struct pardevice *pdev;
c4028958 173 struct net_device *dev;
1da177e4 174 unsigned int work_running;
c4028958 175 struct delayed_work run_work;
1da177e4
LT		 176 unsigned int modem;
177 unsigned int bitrate;
178 unsigned char stat;
179
180 struct {
181 unsigned int intclk;
182 unsigned int fclk;
183 unsigned int bps;
184 unsigned int extmodem;
185 unsigned int loopback;
186 } cfg;
187
188 struct hdlcdrv_channel_params ch_params;
189
190 struct {
191 unsigned int bitbuf, bitstream, numbits, state;
192 unsigned char *bufptr;
193 int bufcnt;
194 unsigned char buf[TXBUFFER_SIZE];
195 } hdlcrx;
196
197 struct {
198 int calibrate;
199 int slotcnt;
200 int flags;
201 enum { tx_idle = 0, tx_keyup, tx_data, tx_tail } state;
202 unsigned char *bufptr;
203 int bufcnt;
204 unsigned char buf[TXBUFFER_SIZE];
205 } hdlctx;
206
1da177e4
LT		 207 unsigned int ptt_keyed;
208 struct sk_buff *skb; /* next transmit packet */
209
210#ifdef BAYCOM_DEBUG
211 struct debug_vals {
212 unsigned long last_jiffies;
213 unsigned cur_intcnt;
214 unsigned last_intcnt;
215 int cur_pllcorr;
216 int last_pllcorr;
217 unsigned int mod_cycles;
218 unsigned int demod_cycles;
219 } debug_vals;
220#endif /* BAYCOM_DEBUG */
221};
222
223/* --------------------------------------------------------------------- */
224
225#define KISS_VERBOSE
226
227/* --------------------------------------------------------------------- */
228
229#define PARAM_TXDELAY 1
230#define PARAM_PERSIST 2
231#define PARAM_SLOTTIME 3
232#define PARAM_TXTAIL 4
233#define PARAM_FULLDUP 5
234#define PARAM_HARDWARE 6
235#define PARAM_RETURN 255
236
237/* --------------------------------------------------------------------- */
238/*
239 * the CRC routines are stolen from WAMPES
240 * by Dieter Deyke
241 */
242
243
244/*---------------------------------------------------------------------------*/
245
246#if 0
247static inline void append_crc_ccitt(unsigned char *buffer, int len)
248{
249 unsigned int crc = 0xffff;
250
251 for (;len>0;len--)
252 crc = (crc >> 8) ^ crc_ccitt_table[(crc ^ *buffer++) & 0xff];
253 crc ^= 0xffff;
254 *buffer++ = crc;
255 *buffer++ = crc >> 8;
256}
257#endif
258
259/*---------------------------------------------------------------------------*/
260
261static inline int check_crc_ccitt(const unsigned char *buf, int cnt)
262{
263 return (crc_ccitt(0xffff, buf, cnt) & 0xffff) == 0xf0b8;
264}
265
266/*---------------------------------------------------------------------------*/
267
268static inline int calc_crc_ccitt(const unsigned char *buf, int cnt)
269{
270 return (crc_ccitt(0xffff, buf, cnt) ^ 0xffff) & 0xffff;
271}
272
273/* ---------------------------------------------------------------------- */
274
275#define tenms_to_flags(bc,tenms) ((tenms * bc->bitrate) / 800)
276
277/* --------------------------------------------------------------------- */
278
279static inline void baycom_int_freq(struct baycom_state *bc)
280{
281#ifdef BAYCOM_DEBUG
282 unsigned long cur_jiffies = jiffies;
283 /*
284 * measure the interrupt frequency
285 */
286 bc->debug_vals.cur_intcnt++;
cd8749b4 287 if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) {
1da177e4
LT		 288 bc->debug_vals.last_jiffies = cur_jiffies;
289 bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
290 bc->debug_vals.cur_intcnt = 0;
291 bc->debug_vals.last_pllcorr = bc->debug_vals.cur_pllcorr;
292 bc->debug_vals.cur_pllcorr = 0;
293 }
294#endif /* BAYCOM_DEBUG */
295}
296
297/* ---------------------------------------------------------------------- */
298/*
299 * eppconfig_path should be setable via /proc/sys.
300 */
301
302static char eppconfig_path[256] = "/usr/sbin/eppfpga";
303
304static char *envp[] = { "HOME=/", "TERM=linux", "PATH=/usr/bin:/bin", NULL };
305
306/* eppconfig: called during ifconfig up to configure the modem */
307static int eppconfig(struct baycom_state *bc)
308{
309 char modearg[256];
310 char portarg[16];
311 char *argv[] = { eppconfig_path, "-s", "-p", portarg, "-m", modearg,
312 NULL };
313
314 /* set up arguments */
315 sprintf(modearg, "%sclk,%smodem,fclk=%d,bps=%d,divider=%d%s,extstat",
316 bc->cfg.intclk ? "int" : "ext",
317 bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps,
318 (bc->cfg.fclk + 8 * bc->cfg.bps) / (16 * bc->cfg.bps),
319 bc->cfg.loopback ? ",loopback" : "");
320 sprintf(portarg, "%ld", bc->pdev->port->base);
321 printk(KERN_DEBUG "%s: %s -s -p %s -m %s\n", bc_drvname, eppconfig_path, portarg, modearg);
322
86313c48 323 return call_usermodehelper(eppconfig_path, argv, envp, UMH_WAIT_PROC);
1da177e4
LT		 324}
325
326/* ---------------------------------------------------------------------- */
327
1da177e4
LT		 328static inline void do_kiss_params(struct baycom_state *bc,
329 unsigned char *data, unsigned long len)
330{
331
332#ifdef KISS_VERBOSE
333#define PKP(a,b) printk(KERN_INFO "baycomm_epp: channel params: " a "\n", b)
334#else /* KISS_VERBOSE */
335#define PKP(a,b)
336#endif /* KISS_VERBOSE */
337
338 if (len < 2)
339 return;
340 switch(data[0]) {
341 case PARAM_TXDELAY:
342 bc->ch_params.tx_delay = data[1];
343 PKP("TX delay = %ums", 10 * bc->ch_params.tx_delay);
344 break;
345 case PARAM_PERSIST:
346 bc->ch_params.ppersist = data[1];
347 PKP("p persistence = %u", bc->ch_params.ppersist);
348 break;
349 case PARAM_SLOTTIME:
350 bc->ch_params.slottime = data[1];
351 PKP("slot time = %ums", bc->ch_params.slottime);
352 break;
353 case PARAM_TXTAIL:
354 bc->ch_params.tx_tail = data[1];
355 PKP("TX tail = %ums", bc->ch_params.tx_tail);
356 break;
357 case PARAM_FULLDUP:
358 bc->ch_params.fulldup = !!data[1];
359 PKP("%s duplex", bc->ch_params.fulldup ? "full" : "half");
360 break;
361 default:
362 break;
363 }
364#undef PKP
365}
366
367/* --------------------------------------------------------------------- */
1da177e4
LT		 368
369static void encode_hdlc(struct baycom_state *bc)
370{
371 struct sk_buff *skb;
372 unsigned char *wp, *bp;
373 int pkt_len;
374 unsigned bitstream, notbitstream, bitbuf, numbit, crc;
375 unsigned char crcarr[2];
0fd56f67 376 int j;
1da177e4
LT		 377
378 if (bc->hdlctx.bufcnt > 0)
379 return;
380 skb = bc->skb;
381 if (!skb)
382 return;
383 bc->skb = NULL;
384 pkt_len = skb->len-1; /* strip KISS byte */
385 wp = bc->hdlctx.buf;
386 bp = skb->data+1;
387 crc = calc_crc_ccitt(bp, pkt_len);
388 crcarr[0] = crc;
389 crcarr[1] = crc >> 8;
390 *wp++ = 0x7e;
391 bitstream = bitbuf = numbit = 0;
392 while (pkt_len > -2) {
393 bitstream >>= 8;
394 bitstream |= ((unsigned int)*bp) << 8;
395 bitbuf |= ((unsigned int)*bp) << numbit;
396 notbitstream = ~bitstream;
397 bp++;
398 pkt_len--;
399 if (!pkt_len)
400 bp = crcarr;
0fd56f67
AB		 401 for (j = 0; j < 8; j++)
402 if (unlikely(!(notbitstream & (0x1f0 << j)))) {
403 bitstream &= ~(0x100 << j);
404 bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) |
405 ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1);
406 numbit++;
407 notbitstream = ~bitstream;
408 }
1da177e4
LT		 409 numbit += 8;
410 while (numbit >= 8) {
411 *wp++ = bitbuf;
412 bitbuf >>= 8;
413 numbit -= 8;
414 }
415 }
416 bitbuf |= 0x7e7e << numbit;
417 numbit += 16;
418 while (numbit >= 8) {
419 *wp++ = bitbuf;
420 bitbuf >>= 8;
421 numbit -= 8;
422 }
423 bc->hdlctx.bufptr = bc->hdlctx.buf;
424 bc->hdlctx.bufcnt = wp - bc->hdlctx.buf;
425 dev_kfree_skb(skb);
cd94f086 426 bc->dev->stats.tx_packets++;
1da177e4
LT		 427}
428
429/* ---------------------------------------------------------------------- */
430
1da177e4
LT		 431static int transmit(struct baycom_state *bc, int cnt, unsigned char stat)
432{
433 struct parport *pp = bc->pdev->port;
434 unsigned char tmp[128];
435 int i, j;
436
437 if (bc->hdlctx.state == tx_tail && !(stat & EPP_PTTBIT))
438 bc->hdlctx.state = tx_idle;
439 if (bc->hdlctx.state == tx_idle && bc->hdlctx.calibrate <= 0) {
440 if (bc->hdlctx.bufcnt <= 0)
441 encode_hdlc(bc);
442 if (bc->hdlctx.bufcnt <= 0)
443 return 0;
444 if (!bc->ch_params.fulldup) {
445 if (!(stat & EPP_DCDBIT)) {
446 bc->hdlctx.slotcnt = bc->ch_params.slottime;
447 return 0;
448 }
449 if ((--bc->hdlctx.slotcnt) > 0)
450 return 0;
451 bc->hdlctx.slotcnt = bc->ch_params.slottime;
e00adf39 452 if ((prandom_u32() % 256) > bc->ch_params.ppersist)
1da177e4
LT		 453 return 0;
454 }
455 }
456 if (bc->hdlctx.state == tx_idle && bc->hdlctx.bufcnt > 0) {
457 bc->hdlctx.state = tx_keyup;
458 bc->hdlctx.flags = tenms_to_flags(bc, bc->ch_params.tx_delay);
459 bc->ptt_keyed++;
460 }
461 while (cnt > 0) {
462 switch (bc->hdlctx.state) {
463 case tx_keyup:
464 i = min_t(int, cnt, bc->hdlctx.flags);
465 cnt -= i;
466 bc->hdlctx.flags -= i;
467 if (bc->hdlctx.flags <= 0)
468 bc->hdlctx.state = tx_data;
469 memset(tmp, 0x7e, sizeof(tmp));
470 while (i > 0) {
471 j = (i > sizeof(tmp)) ? sizeof(tmp) : i;
472 if (j != pp->ops->epp_write_data(pp, tmp, j, 0))
473 return -1;
474 i -= j;
475 }
476 break;
477
478 case tx_data:
479 if (bc->hdlctx.bufcnt <= 0) {
480 encode_hdlc(bc);
481 if (bc->hdlctx.bufcnt <= 0) {
482 bc->hdlctx.state = tx_tail;
483 bc->hdlctx.flags = tenms_to_flags(bc, bc->ch_params.tx_tail);
484 break;
485 }
486 }
487 i = min_t(int, cnt, bc->hdlctx.bufcnt);
488 bc->hdlctx.bufcnt -= i;
489 cnt -= i;
490 if (i != pp->ops->epp_write_data(pp, bc->hdlctx.bufptr, i, 0))
491 return -1;
492 bc->hdlctx.bufptr += i;
493 break;
494
495 case tx_tail:
496 encode_hdlc(bc);
497 if (bc->hdlctx.bufcnt > 0) {
498 bc->hdlctx.state = tx_data;
499 break;
500 }
501 i = min_t(int, cnt, bc->hdlctx.flags);
502 if (i) {
503 cnt -= i;
504 bc->hdlctx.flags -= i;
505 memset(tmp, 0x7e, sizeof(tmp));
506 while (i > 0) {
507 j = (i > sizeof(tmp)) ? sizeof(tmp) : i;
508 if (j != pp->ops->epp_write_data(pp, tmp, j, 0))
509 return -1;
510 i -= j;
511 }
512 break;
513 }
514
515 default: /* fall through */
516 if (bc->hdlctx.calibrate <= 0)
517 return 0;
518 i = min_t(int, cnt, bc->hdlctx.calibrate);
519 cnt -= i;
520 bc->hdlctx.calibrate -= i;
521 memset(tmp, 0, sizeof(tmp));
522 while (i > 0) {
523 j = (i > sizeof(tmp)) ? sizeof(tmp) : i;
524 if (j != pp->ops->epp_write_data(pp, tmp, j, 0))
525 return -1;
526 i -= j;
527 }
528 break;
529 }
530 }
531 return 0;
532}
533
534/* ---------------------------------------------------------------------- */
535
536static void do_rxpacket(struct net_device *dev)
537{
538 struct baycom_state *bc = netdev_priv(dev);
539 struct sk_buff *skb;
540 unsigned char *cp;
541 unsigned pktlen;
542
543 if (bc->hdlcrx.bufcnt < 4)
544 return;
545 if (!check_crc_ccitt(bc->hdlcrx.buf, bc->hdlcrx.bufcnt))
546 return;
547 pktlen = bc->hdlcrx.bufcnt-2+1; /* KISS kludge */
548 if (!(skb = dev_alloc_skb(pktlen))) {
549 printk("%s: memory squeeze, dropping packet\n", dev->name);
cd94f086 550 dev->stats.rx_dropped++;
1da177e4
LT		 551 return;
552 }
1da177e4
LT		 553 cp = skb_put(skb, pktlen);
554 *cp++ = 0; /* KISS kludge */
555 memcpy(cp, bc->hdlcrx.buf, pktlen - 1);
56cb5156 556 skb->protocol = ax25_type_trans(skb, dev);
1da177e4 557 netif_rx(skb);
cd94f086 558 dev->stats.rx_packets++;
1da177e4
LT		 559}
560
1da177e4
LT		 561static int receive(struct net_device *dev, int cnt)
562{
563 struct baycom_state *bc = netdev_priv(dev);
564 struct parport *pp = bc->pdev->port;
565 unsigned int bitbuf, notbitstream, bitstream, numbits, state;
566 unsigned char tmp[128];
567 unsigned char *cp;
568 int cnt2, ret = 0;
0fd56f67 569 int j;
1da177e4
LT		 570
571 numbits = bc->hdlcrx.numbits;
572 state = bc->hdlcrx.state;
573 bitstream = bc->hdlcrx.bitstream;
574 bitbuf = bc->hdlcrx.bitbuf;
575 while (cnt > 0) {
576 cnt2 = (cnt > sizeof(tmp)) ? sizeof(tmp) : cnt;
577 cnt -= cnt2;
578 if (cnt2 != pp->ops->epp_read_data(pp, tmp, cnt2, 0)) {
579 ret = -1;
580 break;
581 }
582 cp = tmp;
583 for (; cnt2 > 0; cnt2--, cp++) {
584 bitstream >>= 8;
585 bitstream |= (*cp) << 8;
586 bitbuf >>= 8;
587 bitbuf |= (*cp) << 8;
588 numbits += 8;
589 notbitstream = ~bitstream;
0fd56f67
AB		 590 for (j = 0; j < 8; j++) {
591
592 /* flag or abort */
593 if (unlikely(!(notbitstream & (0x0fc << j)))) {
594
595 /* abort received */
596 if (!(notbitstream & (0x1fc << j)))
597 state = 0;
598
48bccd25
TS		 599 /* flag received */
600 else if ((bitstream & (0x1fe << j)) == (0x0fc << j)) {
0fd56f67
AB		 601 if (state)
602 do_rxpacket(dev);
603 bc->hdlcrx.bufcnt = 0;
604 bc->hdlcrx.bufptr = bc->hdlcrx.buf;
605 state = 1;
606 numbits = 7-j;
0fd56f67 607 }
48bccd25 608 }
0fd56f67
AB		 609
610 /* stuffed bit */
611 else if (unlikely((bitstream & (0x1f8 << j)) == (0xf8 << j))) {
612 numbits--;
613 bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1);
614 }
615 }
1da177e4
LT		 616 while (state && numbits >= 8) {
617 if (bc->hdlcrx.bufcnt >= TXBUFFER_SIZE) {
618 state = 0;
619 } else {
620 *(bc->hdlcrx.bufptr)++ = bitbuf >> (16-numbits);
621 bc->hdlcrx.bufcnt++;
622 numbits -= 8;
623 }
624 }
625 }
626 }
627 bc->hdlcrx.numbits = numbits;
628 bc->hdlcrx.state = state;
629 bc->hdlcrx.bitstream = bitstream;
630 bc->hdlcrx.bitbuf = bitbuf;
631 return ret;
632}
633
634/* --------------------------------------------------------------------- */
635
636#ifdef __i386__
637#include <asm/msr.h>
59e21e3d
BP		 638#define GETTICK(x) \
639({ \
640 if (boot_cpu_has(X86_FEATURE_TSC)) \
641 x = (unsigned int)rdtsc(); \
1da177e4
LT		 642})
643#else /* __i386__ */
644#define GETTICK(x)
645#endif /* __i386__ */
646
c4028958 647static void epp_bh(struct work_struct *work)
1da177e4 648{
c4028958 649 struct net_device *dev;
1da177e4
LT		 650 struct baycom_state *bc;
651 struct parport *pp;
652 unsigned char stat;
653 unsigned char tmp[2];
654 unsigned int time1 = 0, time2 = 0, time3 = 0;
655 int cnt, cnt2;
c4028958
DH		 656
657 bc = container_of(work, struct baycom_state, run_work.work);
658 dev = bc->dev;
1da177e4
LT		 659 if (!bc->work_running)
660 return;
661 baycom_int_freq(bc);
662 pp = bc->pdev->port;
663 /* update status */
664 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
665 goto epptimeout;
666 bc->stat = stat;
667 bc->debug_vals.last_pllcorr = stat;
668 GETTICK(time1);
669 if (bc->modem == EPP_FPGAEXTSTATUS) {
670 /* get input count */
671 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE|1;
672 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
673 goto epptimeout;
674 if (pp->ops->epp_read_addr(pp, tmp, 2, 0) != 2)
675 goto epptimeout;
676 cnt = tmp[0] | (tmp[1] << 8);
677 cnt &= 0x7fff;
678 /* get output count */
679 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE|2;
680 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
681 goto epptimeout;
682 if (pp->ops->epp_read_addr(pp, tmp, 2, 0) != 2)
683 goto epptimeout;
684 cnt2 = tmp[0] | (tmp[1] << 8);
685 cnt2 = 16384 - (cnt2 & 0x7fff);
686 /* return to normal */
687 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE;
688 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
689 goto epptimeout;
690 if (transmit(bc, cnt2, stat))
691 goto epptimeout;
692 GETTICK(time2);
693 if (receive(dev, cnt))
694 goto epptimeout;
695 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
696 goto epptimeout;
697 bc->stat = stat;
698 } else {
699 /* try to tx */
700 switch (stat & (EPP_NTAEF|EPP_NTHF)) {
701 case EPP_NTHF:
702 cnt = 2048 - 256;
703 break;
704
705 case EPP_NTAEF:
706 cnt = 2048 - 1793;
707 break;
708
709 case 0:
710 cnt = 0;
711 break;
712
713 default:
714 cnt = 2048 - 1025;
715 break;
716 }
717 if (transmit(bc, cnt, stat))
718 goto epptimeout;
719 GETTICK(time2);
720 /* do receiver */
721 while ((stat & (EPP_NRAEF|EPP_NRHF)) != EPP_NRHF) {
722 switch (stat & (EPP_NRAEF|EPP_NRHF)) {
723 case EPP_NRAEF:
724 cnt = 1025;
725 break;
726
727 case 0:
728 cnt = 1793;
729 break;
730
731 default:
732 cnt = 256;
733 break;
734 }
735 if (receive(dev, cnt))
736 goto epptimeout;
737 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
738 goto epptimeout;
739 }
740 cnt = 0;
741 if (bc->bitrate < 50000)
742 cnt = 256;
743 else if (bc->bitrate < 100000)
744 cnt = 128;
745 while (cnt > 0 && stat & EPP_NREF) {
746 if (receive(dev, 1))
747 goto epptimeout;
748 cnt--;
749 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
750 goto epptimeout;
751 }
752 }
753 GETTICK(time3);
754#ifdef BAYCOM_DEBUG
755 bc->debug_vals.mod_cycles = time2 - time1;
756 bc->debug_vals.demod_cycles = time3 - time2;
757#endif /* BAYCOM_DEBUG */
758 schedule_delayed_work(&bc->run_work, 1);
759 if (!bc->skb)
760 netif_wake_queue(dev);
761 return;
762 epptimeout:
763 printk(KERN_ERR "%s: EPP timeout!\n", bc_drvname);
764}
765
766/* ---------------------------------------------------------------------- */
767/*
768 * ===================== network driver interface =========================
769 */
770
771static int baycom_send_packet(struct sk_buff *skb, struct net_device *dev)
772{
773 struct baycom_state *bc = netdev_priv(dev);
774
1d5da757
EB		 775 if (skb->protocol == htons(ETH_P_IP))
776 return ax25_ip_xmit(skb);
777
1da177e4
LT		 778 if (skb->data[0] != 0) {
779 do_kiss_params(bc, skb->data, skb->len);
780 dev_kfree_skb(skb);
6ed10654 781 return NETDEV_TX_OK;
1da177e4
LT		 782 }
783 if (bc->skb)
5b548140 784 return NETDEV_TX_LOCKED;
1da177e4
LT		 785 /* strip KISS byte */
786 if (skb->len >= HDLCDRV_MAXFLEN+1 || skb->len < 3) {
787 dev_kfree_skb(skb);
6ed10654 788 return NETDEV_TX_OK;
1da177e4
LT		 789 }
790 netif_stop_queue(dev);
791 bc->skb = skb;
6ed10654 792 return NETDEV_TX_OK;
1da177e4
LT		 793}
794
795/* --------------------------------------------------------------------- */
796
797static int baycom_set_mac_address(struct net_device *dev, void *addr)
798{
799 struct sockaddr *sa = (struct sockaddr *)addr;
800
801 /* addr is an AX.25 shifted ASCII mac address */
802 memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
803 return 0;
804}
805
806/* --------------------------------------------------------------------- */
807
1da177e4
LT		 808static void epp_wakeup(void *handle)
809{
810 struct net_device *dev = (struct net_device *)handle;
811 struct baycom_state *bc = netdev_priv(dev);
812
813 printk(KERN_DEBUG "baycom_epp: %s: why am I being woken up?\n", dev->name);
814 if (!parport_claim(bc->pdev))
815 printk(KERN_DEBUG "baycom_epp: %s: I'm broken.\n", dev->name);
816}
817
818/* --------------------------------------------------------------------- */
819
820/*
821 * Open/initialize the board. This is called (in the current kernel)
822 * sometime after booting when the 'ifconfig' program is run.
823 *
824 * This routine should set everything up anew at each open, even
825 * registers that "should" only need to be set once at boot, so that
826 * there is non-reboot way to recover if something goes wrong.
827 */
828
829static int epp_open(struct net_device *dev)
830{
831 struct baycom_state *bc = netdev_priv(dev);
832 struct parport *pp = parport_find_base(dev->base_addr);
833 unsigned int i, j;
834 unsigned char tmp[128];
835 unsigned char stat;
836 unsigned long tstart;
837
838 if (!pp) {
839 printk(KERN_ERR "%s: parport at 0x%lx unknown\n", bc_drvname, dev->base_addr);
840 return -ENXIO;
841 }
842#if 0
843 if (pp->irq < 0) {
844 printk(KERN_ERR "%s: parport at 0x%lx has no irq\n", bc_drvname, pp->base);
845 parport_put_port(pp);
846 return -ENXIO;
847 }
848#endif
849 if ((~pp->modes) & (PARPORT_MODE_TRISTATE | PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT)) {
850 printk(KERN_ERR "%s: parport at 0x%lx cannot be used\n",
851 bc_drvname, pp->base);
852 parport_put_port(pp);
853 return -EIO;
854 }
855 memset(&bc->modem, 0, sizeof(bc->modem));
856 bc->pdev = parport_register_device(pp, dev->name, NULL, epp_wakeup,
5712cb3d 857 NULL, PARPORT_DEV_EXCL, dev);
1da177e4
LT		 858 parport_put_port(pp);
859 if (!bc->pdev) {
860 printk(KERN_ERR "%s: cannot register parport at 0x%lx\n", bc_drvname, pp->base);
861 return -ENXIO;
862 }
863 if (parport_claim(bc->pdev)) {
864 printk(KERN_ERR "%s: parport at 0x%lx busy\n", bc_drvname, pp->base);
865 parport_unregister_device(bc->pdev);
866 return -EBUSY;
867 }
868 dev->irq = /*pp->irq*/ 0;
c4028958 869 INIT_DELAYED_WORK(&bc->run_work, epp_bh);
1da177e4
LT		 870 bc->work_running = 1;
871 bc->modem = EPP_CONVENTIONAL;
872 if (eppconfig(bc))
873 printk(KERN_INFO "%s: no FPGA detected, assuming conventional EPP modem\n", bc_drvname);
874 else
875 bc->modem = /*EPP_FPGA*/ EPP_FPGAEXTSTATUS;
876 parport_write_control(pp, LPTCTRL_PROGRAM); /* prepare EPP mode; we aren't using interrupts */
877 /* reset the modem */
878 tmp[0] = 0;
879 tmp[1] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE;
880 if (pp->ops->epp_write_addr(pp, tmp, 2, 0) != 2)
881 goto epptimeout;
882 /* autoprobe baud rate */
883 tstart = jiffies;
884 i = 0;
ff5688ae 885 while (time_before(jiffies, tstart + HZ/3)) {
1da177e4
LT		 886 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
887 goto epptimeout;
888 if ((stat & (EPP_NRAEF|EPP_NRHF)) == EPP_NRHF) {
889 schedule();
890 continue;
891 }
892 if (pp->ops->epp_read_data(pp, tmp, 128, 0) != 128)
893 goto epptimeout;
894 if (pp->ops->epp_read_data(pp, tmp, 128, 0) != 128)
895 goto epptimeout;
896 i += 256;
897 }
898 for (j = 0; j < 256; j++) {
899 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
900 goto epptimeout;
901 if (!(stat & EPP_NREF))
902 break;
903 if (pp->ops->epp_read_data(pp, tmp, 1, 0) != 1)
904 goto epptimeout;
905 i++;
906 }
907 tstart = jiffies - tstart;
908 bc->bitrate = i * (8 * HZ) / tstart;
909 j = 1;
910 i = bc->bitrate >> 3;
911 while (j < 7 && i > 150) {
912 j++;
913 i >>= 1;
914 }
915 printk(KERN_INFO "%s: autoprobed bitrate: %d int divider: %d int rate: %d\n",
916 bc_drvname, bc->bitrate, j, bc->bitrate >> (j+2));
917 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE/*|j*/;
918 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
919 goto epptimeout;
920 /*
921 * initialise hdlc variables
922 */
923 bc->hdlcrx.state = 0;
924 bc->hdlcrx.numbits = 0;
925 bc->hdlctx.state = tx_idle;
926 bc->hdlctx.bufcnt = 0;
927 bc->hdlctx.slotcnt = bc->ch_params.slottime;
928 bc->hdlctx.calibrate = 0;
929 /* start the bottom half stuff */
930 schedule_delayed_work(&bc->run_work, 1);
931 netif_start_queue(dev);
932 return 0;
933
934 epptimeout:
935 printk(KERN_ERR "%s: epp timeout during bitrate probe\n", bc_drvname);
936 parport_write_control(pp, 0); /* reset the adapter */
937 parport_release(bc->pdev);
938 parport_unregister_device(bc->pdev);
939 return -EIO;
940}
941
942/* --------------------------------------------------------------------- */
943
944static int epp_close(struct net_device *dev)
945{
946 struct baycom_state *bc = netdev_priv(dev);
947 struct parport *pp = bc->pdev->port;
948 unsigned char tmp[1];
949
950 bc->work_running = 0;
4bb073c0 951 cancel_delayed_work_sync(&bc->run_work);
1da177e4
LT		 952 bc->stat = EPP_DCDBIT;
953 tmp[0] = 0;
954 pp->ops->epp_write_addr(pp, tmp, 1, 0);
955 parport_write_control(pp, 0); /* reset the adapter */
956 parport_release(bc->pdev);
957 parport_unregister_device(bc->pdev);
958 if (bc->skb)
959 dev_kfree_skb(bc->skb);
960 bc->skb = NULL;
961 printk(KERN_INFO "%s: close epp at iobase 0x%lx irq %u\n",
962 bc_drvname, dev->base_addr, dev->irq);
963 return 0;
964}
965
966/* --------------------------------------------------------------------- */
967
968static int baycom_setmode(struct baycom_state *bc, const char *modestr)
969{
970 const char *cp;
971
972 if (strstr(modestr,"intclk"))
973 bc->cfg.intclk = 1;
974 if (strstr(modestr,"extclk"))
975 bc->cfg.intclk = 0;
976 if (strstr(modestr,"intmodem"))
977 bc->cfg.extmodem = 0;
978 if (strstr(modestr,"extmodem"))
979 bc->cfg.extmodem = 1;
980 if (strstr(modestr,"noloopback"))
981 bc->cfg.loopback = 0;
982 if (strstr(modestr,"loopback"))
983 bc->cfg.loopback = 1;
984 if ((cp = strstr(modestr,"fclk="))) {
985 bc->cfg.fclk = simple_strtoul(cp+5, NULL, 0);
986 if (bc->cfg.fclk < 1000000)
987 bc->cfg.fclk = 1000000;
988 if (bc->cfg.fclk > 25000000)
989 bc->cfg.fclk = 25000000;
990 }
991 if ((cp = strstr(modestr,"bps="))) {
992 bc->cfg.bps = simple_strtoul(cp+4, NULL, 0);
993 if (bc->cfg.bps < 1000)
994 bc->cfg.bps = 1000;
995 if (bc->cfg.bps > 1500000)
996 bc->cfg.bps = 1500000;
997 }
998 return 0;
999}
1000
1001/* --------------------------------------------------------------------- */
1002
1003static int baycom_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1004{
1005 struct baycom_state *bc = netdev_priv(dev);
1006 struct hdlcdrv_ioctl hi;
1007
1008 if (cmd != SIOCDEVPRIVATE)
1009 return -ENOIOCTLCMD;
1010
1011 if (copy_from_user(&hi, ifr->ifr_data, sizeof(hi)))
1012 return -EFAULT;
1013 switch (hi.cmd) {
1014 default:
1015 return -ENOIOCTLCMD;
1016
1017 case HDLCDRVCTL_GETCHANNELPAR:
1018 hi.data.cp.tx_delay = bc->ch_params.tx_delay;
1019 hi.data.cp.tx_tail = bc->ch_params.tx_tail;
1020 hi.data.cp.slottime = bc->ch_params.slottime;
1021 hi.data.cp.ppersist = bc->ch_params.ppersist;
1022 hi.data.cp.fulldup = bc->ch_params.fulldup;
1023 break;
1024
1025 case HDLCDRVCTL_SETCHANNELPAR:
1026 if (!capable(CAP_NET_ADMIN))
1027 return -EACCES;
1028 bc->ch_params.tx_delay = hi.data.cp.tx_delay;
1029 bc->ch_params.tx_tail = hi.data.cp.tx_tail;
1030 bc->ch_params.slottime = hi.data.cp.slottime;
1031 bc->ch_params.ppersist = hi.data.cp.ppersist;
1032 bc->ch_params.fulldup = hi.data.cp.fulldup;
1033 bc->hdlctx.slotcnt = 1;
1034 return 0;
1035
1036 case HDLCDRVCTL_GETMODEMPAR:
1037 hi.data.mp.iobase = dev->base_addr;
1038 hi.data.mp.irq = dev->irq;
1039 hi.data.mp.dma = dev->dma;
1040 hi.data.mp.dma2 = 0;
1041 hi.data.mp.seriobase = 0;
1042 hi.data.mp.pariobase = 0;
1043 hi.data.mp.midiiobase = 0;
1044 break;
1045
1046 case HDLCDRVCTL_SETMODEMPAR:
1047 if ((!capable(CAP_SYS_RAWIO)) || netif_running(dev))
1048 return -EACCES;
1049 dev->base_addr = hi.data.mp.iobase;
1050 dev->irq = /*hi.data.mp.irq*/0;
1051 dev->dma = /*hi.data.mp.dma*/0;
1052 return 0;
1053
1054 case HDLCDRVCTL_GETSTAT:
1055 hi.data.cs.ptt = !!(bc->stat & EPP_PTTBIT);
1056 hi.data.cs.dcd = !(bc->stat & EPP_DCDBIT);
1057 hi.data.cs.ptt_keyed = bc->ptt_keyed;
cd94f086
SH		 1058 hi.data.cs.tx_packets = dev->stats.tx_packets;
1059 hi.data.cs.tx_errors = dev->stats.tx_errors;
1060 hi.data.cs.rx_packets = dev->stats.rx_packets;
1061 hi.data.cs.rx_errors = dev->stats.rx_errors;
1da177e4
LT		 1062 break;
1063
1064 case HDLCDRVCTL_OLDGETSTAT:
1065 hi.data.ocs.ptt = !!(bc->stat & EPP_PTTBIT);
1066 hi.data.ocs.dcd = !(bc->stat & EPP_DCDBIT);
1067 hi.data.ocs.ptt_keyed = bc->ptt_keyed;
1068 break;
1069
1070 case HDLCDRVCTL_CALIBRATE:
1071 if (!capable(CAP_SYS_RAWIO))
1072 return -EACCES;
1073 bc->hdlctx.calibrate = hi.data.calibrate * bc->bitrate / 8;
1074 return 0;
1075
1076 case HDLCDRVCTL_DRIVERNAME:
1077 strncpy(hi.data.drivername, "baycom_epp", sizeof(hi.data.drivername));
1078 break;
1079
1080 case HDLCDRVCTL_GETMODE:
1081 sprintf(hi.data.modename, "%sclk,%smodem,fclk=%d,bps=%d%s",
1082 bc->cfg.intclk ? "int" : "ext",
1083 bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps,
1084 bc->cfg.loopback ? ",loopback" : "");
1085 break;
1086
1087 case HDLCDRVCTL_SETMODE:
1088 if (!capable(CAP_NET_ADMIN) || netif_running(dev))
1089 return -EACCES;
1090 hi.data.modename[sizeof(hi.data.modename)-1] = '\0';
1091 return baycom_setmode(bc, hi.data.modename);
1092
1093 case HDLCDRVCTL_MODELIST:
1094 strncpy(hi.data.modename, "intclk,extclk,intmodem,extmodem,divider=x",
1095 sizeof(hi.data.modename));
1096 break;
1097
1098 case HDLCDRVCTL_MODEMPARMASK:
1099 return HDLCDRV_PARMASK_IOBASE;
1100
1101 }
1102 if (copy_to_user(ifr->ifr_data, &hi, sizeof(hi)))
1103 return -EFAULT;
1104 return 0;
1105}
1106
1107/* --------------------------------------------------------------------- */
1108
9772a252
SH		 1109static const struct net_device_ops baycom_netdev_ops = {
1110 .ndo_open = epp_open,
1111 .ndo_stop = epp_close,
1112 .ndo_do_ioctl = baycom_ioctl,
1113 .ndo_start_xmit = baycom_send_packet,
1114 .ndo_set_mac_address = baycom_set_mac_address,
1115};
1116
1da177e4
LT		 1117/*
1118 * Check for a network adaptor of this type, and return '0' if one exists.
1119 * If dev->base_addr == 0, probe all likely locations.
1120 * If dev->base_addr == 1, always return failure.
1121 * If dev->base_addr == 2, allocate space for the device and return success
1122 * (detachable devices only).
1123 */
1124static void baycom_probe(struct net_device *dev)
1125{
1da177e4
LT		 1126 const struct hdlcdrv_channel_params dflt_ch_params = {
1127 20, 2, 10, 40, 0
1128 };
1129 struct baycom_state *bc;
1130
1131 /*
1132 * not a real probe! only initialize data structures
1133 */
1134 bc = netdev_priv(dev);
1135 /*
1136 * initialize the baycom_state struct
1137 */
1138 bc->ch_params = dflt_ch_params;
1139 bc->ptt_keyed = 0;
1140
1141 /*
1142 * initialize the device struct
1143 */
1da177e4
LT		 1144
1145 /* Fill in the fields of the device structure */
1146 bc->skb = NULL;
1147
9772a252 1148 dev->netdev_ops = &baycom_netdev_ops;
3b04ddde 1149 dev->header_ops = &ax25_header_ops;
1da177e4
LT		 1150
1151 dev->type = ARPHRD_AX25; /* AF_AX25 device */
1152 dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN;
1153 dev->mtu = AX25_DEF_PACLEN; /* eth_mtu is the default */
1154 dev->addr_len = AX25_ADDR_LEN; /* sizeof an ax.25 address */
15b1c0e8 1155 memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
f654c854 1156 memcpy(dev->dev_addr, &null_ax25_address, AX25_ADDR_LEN);
1da177e4
LT		 1157 dev->tx_queue_len = 16;
1158
1159 /* New style flags */
1160 dev->flags = 0;
1161}
1162
1163/* --------------------------------------------------------------------- */
1164
1165/*
1166 * command line settable parameters
1167 */
dc7cdf6c 1168static char *mode[NR_PORTS] = { "", };
1da177e4
LT		 1169static int iobase[NR_PORTS] = { 0x378, };
1170
1171module_param_array(mode, charp, NULL, 0);
1172MODULE_PARM_DESC(mode, "baycom operating mode");
1173module_param_array(iobase, int, NULL, 0);
1174MODULE_PARM_DESC(iobase, "baycom io base address");
1175
1176MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu");
1177MODULE_DESCRIPTION("Baycom epp amateur radio modem driver");
1178MODULE_LICENSE("GPL");
1179
1180/* --------------------------------------------------------------------- */
1181
1182static void __init baycom_epp_dev_setup(struct net_device *dev)
1183{
1184 struct baycom_state *bc = netdev_priv(dev);
1185
1186 /*
1187 * initialize part of the baycom_state struct
1188 */
c4028958 1189 bc->dev = dev;
1da177e4
LT		 1190 bc->magic = BAYCOM_MAGIC;
1191 bc->cfg.fclk = 19666600;
1192 bc->cfg.bps = 9600;
1193 /*
1194 * initialize part of the device struct
1195 */
1196 baycom_probe(dev);
1197}
1198
1199static int __init init_baycomepp(void)
1200{
1201 int i, found = 0;
1202 char set_hw = 1;
1203
1204 printk(bc_drvinfo);
1205 /*
1206 * register net devices
1207 */
1208 for (i = 0; i < NR_PORTS; i++) {
1209 struct net_device *dev;
1210
1211 dev = alloc_netdev(sizeof(struct baycom_state), "bce%d",
c835a677 1212 NET_NAME_UNKNOWN, baycom_epp_dev_setup);
1da177e4
LT		 1213
1214 if (!dev) {
1215 printk(KERN_WARNING "bce%d : out of memory\n", i);
1216 return found ? 0 : -ENOMEM;
1217 }
1218
1219 sprintf(dev->name, "bce%d", i);
1220 dev->base_addr = iobase[i];
1221
1222 if (!mode[i])
1223 set_hw = 0;
1224 if (!set_hw)
1225 iobase[i] = 0;
1226
1227 if (register_netdev(dev)) {
1228 printk(KERN_WARNING "%s: cannot register net device %s\n", bc_drvname, dev->name);
1229 free_netdev(dev);
1230 break;
1231 }
1232 if (set_hw && baycom_setmode(netdev_priv(dev), mode[i]))
1233 set_hw = 0;
1234 baycom_device[i] = dev;
1235 found++;
1236 }
1237
1238 return found ? 0 : -ENXIO;
1239}
1240
1241static void __exit cleanup_baycomepp(void)
1242{
1243 int i;
1244
1245 for(i = 0; i < NR_PORTS; i++) {
1246 struct net_device *dev = baycom_device[i];
1247
1248 if (dev) {
1249 struct baycom_state *bc = netdev_priv(dev);
1250 if (bc->magic == BAYCOM_MAGIC) {
1251 unregister_netdev(dev);
1252 free_netdev(dev);
1253 } else
1254 printk(paranoia_str, "cleanup_module");
1255 }
1256 }
1257}
1258
1259module_init(init_baycomepp);
1260module_exit(cleanup_baycomepp);
1261
1262/* --------------------------------------------------------------------- */
1263
1264#ifndef MODULE
1265
1266/*
1267 * format: baycom_epp=io,mode
1268 * mode: fpga config options
1269 */
1270
1271static int __init baycom_epp_setup(char *str)
1272{
1273 static unsigned __initdata nr_dev = 0;
1274 int ints[2];
1275
1276 if (nr_dev >= NR_PORTS)
1277 return 0;
1278 str = get_options(str, 2, ints);
1279 if (ints[0] < 1)
1280 return 0;
1281 mode[nr_dev] = str;
1282 iobase[nr_dev] = ints[1];
1283 nr_dev++;
1284 return 1;
1285}
1286
1287__setup("baycom_epp=", baycom_epp_setup);
1288
1289#endif /* MODULE */
1290/* --------------------------------------------------------------------- */
Linux 6.x block layer and io_uring tree(s)