Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/drivers/acorn/net/etherh.c | |
3 | * | |
4 | * Copyright (C) 2000-2002 Russell King | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License version 2 as | |
8 | * published by the Free Software Foundation. | |
9 | * | |
10 | * NS8390 I-cubed EtherH and ANT EtherM specific driver | |
11 | * Thanks to I-Cubed for information on their cards. | |
12 | * EtherM conversion (C) 1999 Chris Kemp and Tim Watterton | |
13 | * EtherM integration (C) 2000 Aleph One Ltd (Tak-Shing Chan) | |
14 | * EtherM integration re-engineered by Russell King. | |
15 | * | |
16 | * Changelog: | |
17 | * 08-12-1996 RMK 1.00 Created | |
18 | * RMK 1.03 Added support for EtherLan500 cards | |
19 | * 23-11-1997 RMK 1.04 Added media autodetection | |
20 | * 16-04-1998 RMK 1.05 Improved media autodetection | |
21 | * 10-02-2000 RMK 1.06 Updated for 2.3.43 | |
22 | * 13-05-2000 RMK 1.07 Updated for 2.3.99-pre8 | |
23 | * 12-10-1999 CK/TEW EtherM driver first release | |
24 | * 21-12-2000 TTC EtherH/EtherM integration | |
25 | * 25-12-2000 RMK 1.08 Clean integration of EtherM into this driver. | |
26 | * 03-01-2002 RMK 1.09 Always enable IRQs if we're in the nic slot. | |
27 | */ | |
28 | ||
29 | #include <linux/module.h> | |
30 | #include <linux/kernel.h> | |
1da177e4 LT |
31 | #include <linux/types.h> |
32 | #include <linux/fcntl.h> | |
33 | #include <linux/interrupt.h> | |
34 | #include <linux/ptrace.h> | |
35 | #include <linux/ioport.h> | |
36 | #include <linux/in.h> | |
37 | #include <linux/slab.h> | |
38 | #include <linux/string.h> | |
39 | #include <linux/errno.h> | |
40 | #include <linux/netdevice.h> | |
41 | #include <linux/etherdevice.h> | |
42 | #include <linux/ethtool.h> | |
43 | #include <linux/skbuff.h> | |
44 | #include <linux/delay.h> | |
45 | #include <linux/device.h> | |
46 | #include <linux/init.h> | |
47 | #include <linux/bitops.h> | |
ff5688ae | 48 | #include <linux/jiffies.h> |
1da177e4 LT |
49 | |
50 | #include <asm/system.h> | |
51 | #include <asm/ecard.h> | |
52 | #include <asm/io.h> | |
1da177e4 | 53 | |
6c3561b0 AV |
54 | #define EI_SHIFT(x) (ei_local->reg_offset[x]) |
55 | ||
b936889c AV |
56 | #define ei_inb(_p) readb((void __iomem *)_p) |
57 | #define ei_outb(_v,_p) writeb(_v,(void __iomem *)_p) | |
58 | #define ei_inb_p(_p) readb((void __iomem *)_p) | |
59 | #define ei_outb_p(_v,_p) writeb(_v,(void __iomem *)_p) | |
1da177e4 LT |
60 | |
61 | #define NET_DEBUG 0 | |
62 | #define DEBUG_INIT 2 | |
63 | ||
64 | #define DRV_NAME "etherh" | |
65 | #define DRV_VERSION "1.11" | |
66 | ||
6c3561b0 AV |
67 | static char version[] __initdata = |
68 | "EtherH/EtherM Driver (c) 2002-2004 Russell King " DRV_VERSION "\n"; | |
69 | ||
70 | #include "../lib8390.c" | |
71 | ||
1da177e4 LT |
72 | static unsigned int net_debug = NET_DEBUG; |
73 | ||
74 | struct etherh_priv { | |
75 | void __iomem *ioc_fast; | |
76 | void __iomem *memc; | |
77 | void __iomem *dma_base; | |
78 | unsigned int id; | |
79 | void __iomem *ctrl_port; | |
80 | unsigned char ctrl; | |
81 | u32 supported; | |
82 | }; | |
83 | ||
84 | struct etherh_data { | |
85 | unsigned long ns8390_offset; | |
86 | unsigned long dataport_offset; | |
87 | unsigned long ctrlport_offset; | |
88 | int ctrl_ioc; | |
89 | const char name[16]; | |
90 | u32 supported; | |
91 | unsigned char tx_start_page; | |
92 | unsigned char stop_page; | |
93 | }; | |
94 | ||
95 | MODULE_AUTHOR("Russell King"); | |
96 | MODULE_DESCRIPTION("EtherH/EtherM driver"); | |
97 | MODULE_LICENSE("GPL"); | |
98 | ||
1da177e4 LT |
99 | #define ETHERH500_DATAPORT 0x800 /* MEMC */ |
100 | #define ETHERH500_NS8390 0x000 /* MEMC */ | |
101 | #define ETHERH500_CTRLPORT 0x800 /* IOC */ | |
102 | ||
103 | #define ETHERH600_DATAPORT 0x040 /* MEMC */ | |
104 | #define ETHERH600_NS8390 0x800 /* MEMC */ | |
105 | #define ETHERH600_CTRLPORT 0x200 /* MEMC */ | |
106 | ||
107 | #define ETHERH_CP_IE 1 | |
108 | #define ETHERH_CP_IF 2 | |
109 | #define ETHERH_CP_HEARTBEAT 2 | |
110 | ||
111 | #define ETHERH_TX_START_PAGE 1 | |
112 | #define ETHERH_STOP_PAGE 127 | |
113 | ||
114 | /* | |
115 | * These came from CK/TEW | |
116 | */ | |
117 | #define ETHERM_DATAPORT 0x200 /* MEMC */ | |
118 | #define ETHERM_NS8390 0x800 /* MEMC */ | |
119 | #define ETHERM_CTRLPORT 0x23c /* MEMC */ | |
120 | ||
121 | #define ETHERM_TX_START_PAGE 64 | |
122 | #define ETHERM_STOP_PAGE 127 | |
123 | ||
124 | /* ------------------------------------------------------------------------ */ | |
125 | ||
126 | #define etherh_priv(dev) \ | |
127 | ((struct etherh_priv *)(((char *)netdev_priv(dev)) + sizeof(struct ei_device))) | |
128 | ||
129 | static inline void etherh_set_ctrl(struct etherh_priv *eh, unsigned char mask) | |
130 | { | |
131 | unsigned char ctrl = eh->ctrl | mask; | |
132 | eh->ctrl = ctrl; | |
133 | writeb(ctrl, eh->ctrl_port); | |
134 | } | |
135 | ||
136 | static inline void etherh_clr_ctrl(struct etherh_priv *eh, unsigned char mask) | |
137 | { | |
138 | unsigned char ctrl = eh->ctrl & ~mask; | |
139 | eh->ctrl = ctrl; | |
140 | writeb(ctrl, eh->ctrl_port); | |
141 | } | |
142 | ||
143 | static inline unsigned int etherh_get_stat(struct etherh_priv *eh) | |
144 | { | |
145 | return readb(eh->ctrl_port); | |
146 | } | |
147 | ||
148 | ||
149 | ||
150 | ||
151 | static void etherh_irq_enable(ecard_t *ec, int irqnr) | |
152 | { | |
153 | struct etherh_priv *eh = ec->irq_data; | |
154 | ||
155 | etherh_set_ctrl(eh, ETHERH_CP_IE); | |
156 | } | |
157 | ||
158 | static void etherh_irq_disable(ecard_t *ec, int irqnr) | |
159 | { | |
160 | struct etherh_priv *eh = ec->irq_data; | |
161 | ||
162 | etherh_clr_ctrl(eh, ETHERH_CP_IE); | |
163 | } | |
164 | ||
165 | static expansioncard_ops_t etherh_ops = { | |
166 | .irqenable = etherh_irq_enable, | |
167 | .irqdisable = etherh_irq_disable, | |
168 | }; | |
169 | ||
170 | ||
171 | ||
172 | ||
173 | static void | |
174 | etherh_setif(struct net_device *dev) | |
175 | { | |
176 | struct ei_device *ei_local = netdev_priv(dev); | |
177 | unsigned long flags; | |
178 | void __iomem *addr; | |
179 | ||
180 | local_irq_save(flags); | |
181 | ||
182 | /* set the interface type */ | |
183 | switch (etherh_priv(dev)->id) { | |
184 | case PROD_I3_ETHERLAN600: | |
185 | case PROD_I3_ETHERLAN600A: | |
b936889c | 186 | addr = (void __iomem *)dev->base_addr + EN0_RCNTHI; |
1da177e4 LT |
187 | |
188 | switch (dev->if_port) { | |
189 | case IF_PORT_10BASE2: | |
190 | writeb((readb(addr) & 0xf8) | 1, addr); | |
191 | break; | |
192 | case IF_PORT_10BASET: | |
193 | writeb((readb(addr) & 0xf8), addr); | |
194 | break; | |
195 | } | |
196 | break; | |
197 | ||
198 | case PROD_I3_ETHERLAN500: | |
199 | switch (dev->if_port) { | |
200 | case IF_PORT_10BASE2: | |
201 | etherh_clr_ctrl(etherh_priv(dev), ETHERH_CP_IF); | |
202 | break; | |
203 | ||
204 | case IF_PORT_10BASET: | |
205 | etherh_set_ctrl(etherh_priv(dev), ETHERH_CP_IF); | |
206 | break; | |
207 | } | |
208 | break; | |
209 | ||
210 | default: | |
211 | break; | |
212 | } | |
213 | ||
214 | local_irq_restore(flags); | |
215 | } | |
216 | ||
217 | static int | |
218 | etherh_getifstat(struct net_device *dev) | |
219 | { | |
220 | struct ei_device *ei_local = netdev_priv(dev); | |
221 | void __iomem *addr; | |
222 | int stat = 0; | |
223 | ||
224 | switch (etherh_priv(dev)->id) { | |
225 | case PROD_I3_ETHERLAN600: | |
226 | case PROD_I3_ETHERLAN600A: | |
b936889c | 227 | addr = (void __iomem *)dev->base_addr + EN0_RCNTHI; |
1da177e4 LT |
228 | switch (dev->if_port) { |
229 | case IF_PORT_10BASE2: | |
230 | stat = 1; | |
231 | break; | |
232 | case IF_PORT_10BASET: | |
233 | stat = readb(addr) & 4; | |
234 | break; | |
235 | } | |
236 | break; | |
237 | ||
238 | case PROD_I3_ETHERLAN500: | |
239 | switch (dev->if_port) { | |
240 | case IF_PORT_10BASE2: | |
241 | stat = 1; | |
242 | break; | |
243 | case IF_PORT_10BASET: | |
244 | stat = etherh_get_stat(etherh_priv(dev)) & ETHERH_CP_HEARTBEAT; | |
245 | break; | |
246 | } | |
247 | break; | |
248 | ||
249 | default: | |
250 | stat = 0; | |
251 | break; | |
252 | } | |
253 | ||
254 | return stat != 0; | |
255 | } | |
256 | ||
257 | /* | |
258 | * Configure the interface. Note that we ignore the other | |
259 | * parts of ifmap, since its mostly meaningless for this driver. | |
260 | */ | |
261 | static int etherh_set_config(struct net_device *dev, struct ifmap *map) | |
262 | { | |
263 | switch (map->port) { | |
264 | case IF_PORT_10BASE2: | |
265 | case IF_PORT_10BASET: | |
266 | /* | |
267 | * If the user explicitly sets the interface | |
268 | * media type, turn off automedia detection. | |
269 | */ | |
270 | dev->flags &= ~IFF_AUTOMEDIA; | |
271 | dev->if_port = map->port; | |
272 | break; | |
273 | ||
274 | default: | |
275 | return -EINVAL; | |
276 | } | |
277 | ||
278 | etherh_setif(dev); | |
279 | ||
280 | return 0; | |
281 | } | |
282 | ||
283 | /* | |
284 | * Reset the 8390 (hard reset). Note that we can't actually do this. | |
285 | */ | |
286 | static void | |
287 | etherh_reset(struct net_device *dev) | |
288 | { | |
289 | struct ei_device *ei_local = netdev_priv(dev); | |
b936889c | 290 | void __iomem *addr = (void __iomem *)dev->base_addr; |
1da177e4 LT |
291 | |
292 | writeb(E8390_NODMA+E8390_PAGE0+E8390_STOP, addr); | |
293 | ||
294 | /* | |
295 | * See if we need to change the interface type. | |
296 | * Note that we use 'interface_num' as a flag | |
297 | * to indicate that we need to change the media. | |
298 | */ | |
299 | if (dev->flags & IFF_AUTOMEDIA && ei_local->interface_num) { | |
300 | ei_local->interface_num = 0; | |
301 | ||
302 | if (dev->if_port == IF_PORT_10BASET) | |
303 | dev->if_port = IF_PORT_10BASE2; | |
304 | else | |
305 | dev->if_port = IF_PORT_10BASET; | |
306 | ||
307 | etherh_setif(dev); | |
308 | } | |
309 | } | |
310 | ||
311 | /* | |
312 | * Write a block of data out to the 8390 | |
313 | */ | |
314 | static void | |
315 | etherh_block_output (struct net_device *dev, int count, const unsigned char *buf, int start_page) | |
316 | { | |
317 | struct ei_device *ei_local = netdev_priv(dev); | |
318 | unsigned long dma_start; | |
319 | void __iomem *dma_base, *addr; | |
320 | ||
321 | if (ei_local->dmaing) { | |
322 | printk(KERN_ERR "%s: DMAing conflict in etherh_block_input: " | |
323 | " DMAstat %d irqlock %d\n", dev->name, | |
324 | ei_local->dmaing, ei_local->irqlock); | |
325 | return; | |
326 | } | |
327 | ||
328 | /* | |
329 | * Make sure we have a round number of bytes if we're in word mode. | |
330 | */ | |
331 | if (count & 1 && ei_local->word16) | |
332 | count++; | |
333 | ||
334 | ei_local->dmaing = 1; | |
335 | ||
b936889c | 336 | addr = (void __iomem *)dev->base_addr; |
1da177e4 LT |
337 | dma_base = etherh_priv(dev)->dma_base; |
338 | ||
339 | count = (count + 1) & ~1; | |
340 | writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD); | |
341 | ||
342 | writeb (0x42, addr + EN0_RCNTLO); | |
343 | writeb (0x00, addr + EN0_RCNTHI); | |
344 | writeb (0x42, addr + EN0_RSARLO); | |
345 | writeb (0x00, addr + EN0_RSARHI); | |
346 | writeb (E8390_RREAD | E8390_START, addr + E8390_CMD); | |
347 | ||
348 | udelay (1); | |
349 | ||
350 | writeb (ENISR_RDC, addr + EN0_ISR); | |
351 | writeb (count, addr + EN0_RCNTLO); | |
352 | writeb (count >> 8, addr + EN0_RCNTHI); | |
353 | writeb (0, addr + EN0_RSARLO); | |
354 | writeb (start_page, addr + EN0_RSARHI); | |
355 | writeb (E8390_RWRITE | E8390_START, addr + E8390_CMD); | |
356 | ||
357 | if (ei_local->word16) | |
358 | writesw (dma_base, buf, count >> 1); | |
359 | else | |
360 | writesb (dma_base, buf, count); | |
361 | ||
362 | dma_start = jiffies; | |
363 | ||
364 | while ((readb (addr + EN0_ISR) & ENISR_RDC) == 0) | |
ff5688ae | 365 | if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ |
1da177e4 LT |
366 | printk(KERN_ERR "%s: timeout waiting for TX RDC\n", |
367 | dev->name); | |
368 | etherh_reset (dev); | |
6c3561b0 | 369 | __NS8390_init (dev, 1); |
1da177e4 LT |
370 | break; |
371 | } | |
372 | ||
373 | writeb (ENISR_RDC, addr + EN0_ISR); | |
374 | ei_local->dmaing = 0; | |
375 | } | |
376 | ||
377 | /* | |
378 | * Read a block of data from the 8390 | |
379 | */ | |
380 | static void | |
381 | etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) | |
382 | { | |
383 | struct ei_device *ei_local = netdev_priv(dev); | |
384 | unsigned char *buf; | |
385 | void __iomem *dma_base, *addr; | |
386 | ||
387 | if (ei_local->dmaing) { | |
388 | printk(KERN_ERR "%s: DMAing conflict in etherh_block_input: " | |
389 | " DMAstat %d irqlock %d\n", dev->name, | |
390 | ei_local->dmaing, ei_local->irqlock); | |
391 | return; | |
392 | } | |
393 | ||
394 | ei_local->dmaing = 1; | |
395 | ||
b936889c | 396 | addr = (void __iomem *)dev->base_addr; |
1da177e4 LT |
397 | dma_base = etherh_priv(dev)->dma_base; |
398 | ||
399 | buf = skb->data; | |
400 | writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD); | |
401 | writeb (count, addr + EN0_RCNTLO); | |
402 | writeb (count >> 8, addr + EN0_RCNTHI); | |
403 | writeb (ring_offset, addr + EN0_RSARLO); | |
404 | writeb (ring_offset >> 8, addr + EN0_RSARHI); | |
405 | writeb (E8390_RREAD | E8390_START, addr + E8390_CMD); | |
406 | ||
407 | if (ei_local->word16) { | |
408 | readsw (dma_base, buf, count >> 1); | |
409 | if (count & 1) | |
410 | buf[count - 1] = readb (dma_base); | |
411 | } else | |
412 | readsb (dma_base, buf, count); | |
413 | ||
414 | writeb (ENISR_RDC, addr + EN0_ISR); | |
415 | ei_local->dmaing = 0; | |
416 | } | |
417 | ||
418 | /* | |
419 | * Read a header from the 8390 | |
420 | */ | |
421 | static void | |
422 | etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) | |
423 | { | |
424 | struct ei_device *ei_local = netdev_priv(dev); | |
425 | void __iomem *dma_base, *addr; | |
426 | ||
427 | if (ei_local->dmaing) { | |
428 | printk(KERN_ERR "%s: DMAing conflict in etherh_get_header: " | |
429 | " DMAstat %d irqlock %d\n", dev->name, | |
430 | ei_local->dmaing, ei_local->irqlock); | |
431 | return; | |
432 | } | |
433 | ||
434 | ei_local->dmaing = 1; | |
435 | ||
b936889c | 436 | addr = (void __iomem *)dev->base_addr; |
1da177e4 LT |
437 | dma_base = etherh_priv(dev)->dma_base; |
438 | ||
439 | writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD); | |
440 | writeb (sizeof (*hdr), addr + EN0_RCNTLO); | |
441 | writeb (0, addr + EN0_RCNTHI); | |
442 | writeb (0, addr + EN0_RSARLO); | |
443 | writeb (ring_page, addr + EN0_RSARHI); | |
444 | writeb (E8390_RREAD | E8390_START, addr + E8390_CMD); | |
445 | ||
446 | if (ei_local->word16) | |
447 | readsw (dma_base, hdr, sizeof (*hdr) >> 1); | |
448 | else | |
449 | readsb (dma_base, hdr, sizeof (*hdr)); | |
450 | ||
451 | writeb (ENISR_RDC, addr + EN0_ISR); | |
452 | ei_local->dmaing = 0; | |
453 | } | |
454 | ||
455 | /* | |
456 | * Open/initialize the board. This is called (in the current kernel) | |
457 | * sometime after booting when the 'ifconfig' program is run. | |
458 | * | |
459 | * This routine should set everything up anew at each open, even | |
460 | * registers that "should" only need to be set once at boot, so that | |
461 | * there is non-reboot way to recover if something goes wrong. | |
462 | */ | |
463 | static int | |
464 | etherh_open(struct net_device *dev) | |
465 | { | |
466 | struct ei_device *ei_local = netdev_priv(dev); | |
467 | ||
468 | if (!is_valid_ether_addr(dev->dev_addr)) { | |
469 | printk(KERN_WARNING "%s: invalid ethernet MAC address\n", | |
470 | dev->name); | |
471 | return -EINVAL; | |
472 | } | |
473 | ||
6c3561b0 | 474 | if (request_irq(dev->irq, __ei_interrupt, 0, dev->name, dev)) |
1da177e4 LT |
475 | return -EAGAIN; |
476 | ||
477 | /* | |
478 | * Make sure that we aren't going to change the | |
479 | * media type on the next reset - we are about to | |
480 | * do automedia manually now. | |
481 | */ | |
482 | ei_local->interface_num = 0; | |
483 | ||
484 | /* | |
485 | * If we are doing automedia detection, do it now. | |
486 | * This is more reliable than the 8390's detection. | |
487 | */ | |
488 | if (dev->flags & IFF_AUTOMEDIA) { | |
489 | dev->if_port = IF_PORT_10BASET; | |
490 | etherh_setif(dev); | |
491 | mdelay(1); | |
492 | if (!etherh_getifstat(dev)) { | |
493 | dev->if_port = IF_PORT_10BASE2; | |
494 | etherh_setif(dev); | |
495 | } | |
496 | } else | |
497 | etherh_setif(dev); | |
498 | ||
499 | etherh_reset(dev); | |
6c3561b0 | 500 | __ei_open(dev); |
1da177e4 LT |
501 | |
502 | return 0; | |
503 | } | |
504 | ||
505 | /* | |
506 | * The inverse routine to etherh_open(). | |
507 | */ | |
508 | static int | |
509 | etherh_close(struct net_device *dev) | |
510 | { | |
6c3561b0 | 511 | __ei_close (dev); |
1da177e4 LT |
512 | free_irq (dev->irq, dev); |
513 | return 0; | |
514 | } | |
515 | ||
516 | /* | |
517 | * Initialisation | |
518 | */ | |
519 | ||
520 | static void __init etherh_banner(void) | |
521 | { | |
522 | static int version_printed; | |
523 | ||
524 | if (net_debug && version_printed++ == 0) | |
525 | printk(KERN_INFO "%s", version); | |
526 | } | |
527 | ||
528 | /* | |
529 | * Read the ethernet address string from the on board rom. | |
530 | * This is an ascii string... | |
531 | */ | |
532 | static int __init etherh_addr(char *addr, struct expansion_card *ec) | |
533 | { | |
534 | struct in_chunk_dir cd; | |
535 | char *s; | |
536 | ||
537 | if (!ecard_readchunk(&cd, ec, 0xf5, 0)) { | |
538 | printk(KERN_ERR "%s: unable to read podule description string\n", | |
539 | ec->dev.bus_id); | |
540 | goto no_addr; | |
541 | } | |
542 | ||
543 | s = strchr(cd.d.string, '('); | |
544 | if (s) { | |
545 | int i; | |
546 | ||
547 | for (i = 0; i < 6; i++) { | |
548 | addr[i] = simple_strtoul(s + 1, &s, 0x10); | |
549 | if (*s != (i == 5? ')' : ':')) | |
550 | break; | |
551 | } | |
552 | ||
553 | if (i == 6) | |
554 | return 0; | |
555 | } | |
556 | ||
557 | printk(KERN_ERR "%s: unable to parse MAC address: %s\n", | |
558 | ec->dev.bus_id, cd.d.string); | |
559 | ||
560 | no_addr: | |
561 | return -ENODEV; | |
562 | } | |
563 | ||
564 | /* | |
565 | * Create an ethernet address from the system serial number. | |
566 | */ | |
567 | static int __init etherm_addr(char *addr) | |
568 | { | |
569 | unsigned int serial; | |
570 | ||
571 | if (system_serial_low == 0 && system_serial_high == 0) | |
572 | return -ENODEV; | |
573 | ||
574 | serial = system_serial_low | system_serial_high; | |
575 | ||
576 | addr[0] = 0; | |
577 | addr[1] = 0; | |
578 | addr[2] = 0xa4; | |
579 | addr[3] = 0x10 + (serial >> 24); | |
580 | addr[4] = serial >> 16; | |
581 | addr[5] = serial >> 8; | |
582 | return 0; | |
583 | } | |
584 | ||
585 | static void etherh_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) | |
586 | { | |
587 | strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); | |
588 | strlcpy(info->version, DRV_VERSION, sizeof(info->version)); | |
43cb76d9 | 589 | strlcpy(info->bus_info, dev->dev.parent->bus_id, |
1da177e4 LT |
590 | sizeof(info->bus_info)); |
591 | } | |
592 | ||
593 | static int etherh_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) | |
594 | { | |
595 | cmd->supported = etherh_priv(dev)->supported; | |
596 | cmd->speed = SPEED_10; | |
597 | cmd->duplex = DUPLEX_HALF; | |
598 | cmd->port = dev->if_port == IF_PORT_10BASET ? PORT_TP : PORT_BNC; | |
599 | cmd->autoneg = dev->flags & IFF_AUTOMEDIA ? AUTONEG_ENABLE : AUTONEG_DISABLE; | |
600 | return 0; | |
601 | } | |
602 | ||
603 | static int etherh_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) | |
604 | { | |
605 | switch (cmd->autoneg) { | |
606 | case AUTONEG_ENABLE: | |
607 | dev->flags |= IFF_AUTOMEDIA; | |
608 | break; | |
609 | ||
610 | case AUTONEG_DISABLE: | |
611 | switch (cmd->port) { | |
612 | case PORT_TP: | |
613 | dev->if_port = IF_PORT_10BASET; | |
614 | break; | |
615 | ||
616 | case PORT_BNC: | |
617 | dev->if_port = IF_PORT_10BASE2; | |
618 | break; | |
619 | ||
620 | default: | |
621 | return -EINVAL; | |
622 | } | |
623 | dev->flags &= ~IFF_AUTOMEDIA; | |
624 | break; | |
625 | ||
626 | default: | |
627 | return -EINVAL; | |
628 | } | |
629 | ||
630 | etherh_setif(dev); | |
631 | ||
632 | return 0; | |
633 | } | |
634 | ||
7282d491 | 635 | static const struct ethtool_ops etherh_ethtool_ops = { |
1da177e4 LT |
636 | .get_settings = etherh_get_settings, |
637 | .set_settings = etherh_set_settings, | |
638 | .get_drvinfo = etherh_get_drvinfo, | |
639 | }; | |
640 | ||
641 | static u32 etherh_regoffsets[16]; | |
642 | static u32 etherm_regoffsets[16]; | |
643 | ||
644 | static int __init | |
645 | etherh_probe(struct expansion_card *ec, const struct ecard_id *id) | |
646 | { | |
647 | const struct etherh_data *data = id->data; | |
648 | struct ei_device *ei_local; | |
649 | struct net_device *dev; | |
650 | struct etherh_priv *eh; | |
651 | int i, ret; | |
652 | ||
653 | etherh_banner(); | |
654 | ||
655 | ret = ecard_request_resources(ec); | |
656 | if (ret) | |
657 | goto out; | |
658 | ||
6c3561b0 | 659 | dev = ____alloc_ei_netdev(sizeof(struct etherh_priv)); |
1da177e4 LT |
660 | if (!dev) { |
661 | ret = -ENOMEM; | |
662 | goto release; | |
663 | } | |
664 | ||
665 | SET_MODULE_OWNER(dev); | |
666 | SET_NETDEV_DEV(dev, &ec->dev); | |
667 | ||
668 | dev->open = etherh_open; | |
669 | dev->stop = etherh_close; | |
670 | dev->set_config = etherh_set_config; | |
671 | dev->irq = ec->irq; | |
672 | dev->ethtool_ops = ðerh_ethtool_ops; | |
673 | ||
674 | if (data->supported & SUPPORTED_Autoneg) | |
675 | dev->flags |= IFF_AUTOMEDIA; | |
676 | if (data->supported & SUPPORTED_TP) { | |
677 | dev->flags |= IFF_PORTSEL; | |
678 | dev->if_port = IF_PORT_10BASET; | |
679 | } else if (data->supported & SUPPORTED_BNC) { | |
680 | dev->flags |= IFF_PORTSEL; | |
681 | dev->if_port = IF_PORT_10BASE2; | |
682 | } else | |
683 | dev->if_port = IF_PORT_UNKNOWN; | |
684 | ||
685 | eh = etherh_priv(dev); | |
686 | eh->supported = data->supported; | |
687 | eh->ctrl = 0; | |
688 | eh->id = ec->cid.product; | |
689 | eh->memc = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC), PAGE_SIZE); | |
690 | if (!eh->memc) { | |
691 | ret = -ENOMEM; | |
692 | goto free; | |
693 | } | |
694 | ||
695 | eh->ctrl_port = eh->memc; | |
696 | if (data->ctrl_ioc) { | |
697 | eh->ioc_fast = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST), PAGE_SIZE); | |
698 | if (!eh->ioc_fast) { | |
699 | ret = -ENOMEM; | |
700 | goto free; | |
701 | } | |
702 | eh->ctrl_port = eh->ioc_fast; | |
703 | } | |
704 | ||
c7e78876 | 705 | dev->base_addr = (unsigned long)eh->memc + data->ns8390_offset; |
1da177e4 LT |
706 | eh->dma_base = eh->memc + data->dataport_offset; |
707 | eh->ctrl_port += data->ctrlport_offset; | |
708 | ||
709 | /* | |
710 | * IRQ and control port handling - only for non-NIC slot cards. | |
711 | */ | |
712 | if (ec->slot_no != 8) { | |
713 | ec->ops = ðerh_ops; | |
714 | ec->irq_data = eh; | |
715 | } else { | |
716 | /* | |
717 | * If we're in the NIC slot, make sure the IRQ is enabled | |
718 | */ | |
719 | etherh_set_ctrl(eh, ETHERH_CP_IE); | |
720 | } | |
721 | ||
722 | ei_local = netdev_priv(dev); | |
723 | spin_lock_init(&ei_local->page_lock); | |
724 | ||
725 | if (ec->cid.product == PROD_ANT_ETHERM) { | |
726 | etherm_addr(dev->dev_addr); | |
727 | ei_local->reg_offset = etherm_regoffsets; | |
728 | } else { | |
729 | etherh_addr(dev->dev_addr, ec); | |
730 | ei_local->reg_offset = etherh_regoffsets; | |
731 | } | |
732 | ||
733 | ei_local->name = dev->name; | |
734 | ei_local->word16 = 1; | |
735 | ei_local->tx_start_page = data->tx_start_page; | |
736 | ei_local->rx_start_page = ei_local->tx_start_page + TX_PAGES; | |
737 | ei_local->stop_page = data->stop_page; | |
738 | ei_local->reset_8390 = etherh_reset; | |
739 | ei_local->block_input = etherh_block_input; | |
740 | ei_local->block_output = etherh_block_output; | |
741 | ei_local->get_8390_hdr = etherh_get_header; | |
742 | ei_local->interface_num = 0; | |
743 | ||
744 | etherh_reset(dev); | |
6c3561b0 | 745 | __NS8390_init(dev, 0); |
1da177e4 LT |
746 | |
747 | ret = register_netdev(dev); | |
748 | if (ret) | |
749 | goto free; | |
750 | ||
751 | printk(KERN_INFO "%s: %s in slot %d, ", | |
752 | dev->name, data->name, ec->slot_no); | |
753 | ||
754 | for (i = 0; i < 6; i++) | |
755 | printk("%2.2x%c", dev->dev_addr[i], i == 5 ? '\n' : ':'); | |
756 | ||
757 | ecard_set_drvdata(ec, dev); | |
758 | ||
759 | return 0; | |
760 | ||
761 | free: | |
762 | if (eh->ioc_fast) | |
763 | iounmap(eh->ioc_fast); | |
764 | if (eh->memc) | |
765 | iounmap(eh->memc); | |
766 | free_netdev(dev); | |
767 | release: | |
768 | ecard_release_resources(ec); | |
769 | out: | |
770 | return ret; | |
771 | } | |
772 | ||
773 | static void __devexit etherh_remove(struct expansion_card *ec) | |
774 | { | |
775 | struct net_device *dev = ecard_get_drvdata(ec); | |
776 | struct etherh_priv *eh = etherh_priv(dev); | |
777 | ||
778 | ecard_set_drvdata(ec, NULL); | |
779 | ||
780 | unregister_netdev(dev); | |
781 | ec->ops = NULL; | |
782 | ||
783 | if (eh->ioc_fast) | |
784 | iounmap(eh->ioc_fast); | |
785 | iounmap(eh->memc); | |
786 | ||
787 | free_netdev(dev); | |
788 | ||
789 | ecard_release_resources(ec); | |
790 | } | |
791 | ||
792 | static struct etherh_data etherm_data = { | |
793 | .ns8390_offset = ETHERM_NS8390, | |
794 | .dataport_offset = ETHERM_NS8390 + ETHERM_DATAPORT, | |
795 | .ctrlport_offset = ETHERM_NS8390 + ETHERM_CTRLPORT, | |
796 | .name = "ANT EtherM", | |
797 | .supported = SUPPORTED_10baseT_Half, | |
798 | .tx_start_page = ETHERM_TX_START_PAGE, | |
799 | .stop_page = ETHERM_STOP_PAGE, | |
800 | }; | |
801 | ||
802 | static struct etherh_data etherlan500_data = { | |
803 | .ns8390_offset = ETHERH500_NS8390, | |
804 | .dataport_offset = ETHERH500_NS8390 + ETHERH500_DATAPORT, | |
805 | .ctrlport_offset = ETHERH500_CTRLPORT, | |
806 | .ctrl_ioc = 1, | |
807 | .name = "i3 EtherH 500", | |
808 | .supported = SUPPORTED_10baseT_Half, | |
809 | .tx_start_page = ETHERH_TX_START_PAGE, | |
810 | .stop_page = ETHERH_STOP_PAGE, | |
811 | }; | |
812 | ||
813 | static struct etherh_data etherlan600_data = { | |
814 | .ns8390_offset = ETHERH600_NS8390, | |
815 | .dataport_offset = ETHERH600_NS8390 + ETHERH600_DATAPORT, | |
816 | .ctrlport_offset = ETHERH600_NS8390 + ETHERH600_CTRLPORT, | |
817 | .name = "i3 EtherH 600", | |
818 | .supported = SUPPORTED_10baseT_Half | SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_Autoneg, | |
819 | .tx_start_page = ETHERH_TX_START_PAGE, | |
820 | .stop_page = ETHERH_STOP_PAGE, | |
821 | }; | |
822 | ||
823 | static struct etherh_data etherlan600a_data = { | |
824 | .ns8390_offset = ETHERH600_NS8390, | |
825 | .dataport_offset = ETHERH600_NS8390 + ETHERH600_DATAPORT, | |
826 | .ctrlport_offset = ETHERH600_NS8390 + ETHERH600_CTRLPORT, | |
827 | .name = "i3 EtherH 600A", | |
828 | .supported = SUPPORTED_10baseT_Half | SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_Autoneg, | |
829 | .tx_start_page = ETHERH_TX_START_PAGE, | |
830 | .stop_page = ETHERH_STOP_PAGE, | |
831 | }; | |
832 | ||
833 | static const struct ecard_id etherh_ids[] = { | |
834 | { MANU_ANT, PROD_ANT_ETHERM, ðerm_data }, | |
835 | { MANU_I3, PROD_I3_ETHERLAN500, ðerlan500_data }, | |
836 | { MANU_I3, PROD_I3_ETHERLAN600, ðerlan600_data }, | |
837 | { MANU_I3, PROD_I3_ETHERLAN600A, ðerlan600a_data }, | |
838 | { 0xffff, 0xffff } | |
839 | }; | |
840 | ||
841 | static struct ecard_driver etherh_driver = { | |
842 | .probe = etherh_probe, | |
843 | .remove = __devexit_p(etherh_remove), | |
844 | .id_table = etherh_ids, | |
845 | .drv = { | |
846 | .name = DRV_NAME, | |
847 | }, | |
848 | }; | |
849 | ||
850 | static int __init etherh_init(void) | |
851 | { | |
852 | int i; | |
853 | ||
854 | for (i = 0; i < 16; i++) { | |
855 | etherh_regoffsets[i] = i << 2; | |
856 | etherm_regoffsets[i] = i << 5; | |
857 | } | |
858 | ||
859 | return ecard_register_driver(ðerh_driver); | |
860 | } | |
861 | ||
862 | static void __exit etherh_exit(void) | |
863 | { | |
864 | ecard_remove_driver(ðerh_driver); | |
865 | } | |
866 | ||
867 | module_init(etherh_init); | |
868 | module_exit(etherh_exit); |