[MTD] Use __symbol_get() instead of symbol_get() in NOR chip probe
[linux-2.6-block.git] / drivers / mtd / mtdconcat.c
CommitLineData
1da177e4
LT
1/*
2 * MTD device concatenation layer
3 *
4 * (C) 2002 Robert Kaiser <rkaiser@sysgo.de>
5 *
6 * NAND support by Christian Gan <cgan@iders.ca>
7 *
8 * This code is GPL
9 *
97894cda 10 * $Id: mtdconcat.c,v 1.11 2005/11/07 11:14:20 gleixner Exp $
1da177e4
LT
11 */
12
1da177e4 13#include <linux/kernel.h>
15fdc52f 14#include <linux/module.h>
1da177e4 15#include <linux/slab.h>
15fdc52f
TG
16#include <linux/sched.h>
17#include <linux/types.h>
18
1da177e4
LT
19#include <linux/mtd/mtd.h>
20#include <linux/mtd/concat.h>
21
22/*
23 * Our storage structure:
24 * Subdev points to an array of pointers to struct mtd_info objects
25 * which is allocated along with this structure
26 *
27 */
28struct mtd_concat {
29 struct mtd_info mtd;
30 int num_subdev;
31 struct mtd_info **subdev;
32};
33
34/*
35 * how to calculate the size required for the above structure,
36 * including the pointer array subdev points to:
37 */
38#define SIZEOF_STRUCT_MTD_CONCAT(num_subdev) \
39 ((sizeof(struct mtd_concat) + (num_subdev) * sizeof(struct mtd_info *)))
40
41/*
42 * Given a pointer to the MTD object in the mtd_concat structure,
43 * we can retrieve the pointer to that structure with this macro.
44 */
45#define CONCAT(x) ((struct mtd_concat *)(x))
46
97894cda 47/*
1da177e4
LT
48 * MTD methods which look up the relevant subdevice, translate the
49 * effective address and pass through to the subdevice.
50 */
51
52static int
53concat_read(struct mtd_info *mtd, loff_t from, size_t len,
54 size_t * retlen, u_char * buf)
55{
56 struct mtd_concat *concat = CONCAT(mtd);
57 int err = -EINVAL;
58 int i;
59
60 *retlen = 0;
61
62 for (i = 0; i < concat->num_subdev; i++) {
63 struct mtd_info *subdev = concat->subdev[i];
64 size_t size, retsize;
65
66 if (from >= subdev->size) {
67 /* Not destined for this subdev */
68 size = 0;
69 from -= subdev->size;
70 continue;
71 }
72 if (from + len > subdev->size)
73 /* First part goes into this subdev */
74 size = subdev->size - from;
75 else
76 /* Entire transaction goes into this subdev */
77 size = len;
78
79 err = subdev->read(subdev, from, size, &retsize, buf);
80
81 if (err)
82 break;
83
84 *retlen += retsize;
85 len -= size;
86 if (len == 0)
87 break;
88
89 err = -EINVAL;
90 buf += size;
91 from = 0;
92 }
93 return err;
94}
95
96static int
97concat_write(struct mtd_info *mtd, loff_t to, size_t len,
98 size_t * retlen, const u_char * buf)
99{
100 struct mtd_concat *concat = CONCAT(mtd);
101 int err = -EINVAL;
102 int i;
103
104 if (!(mtd->flags & MTD_WRITEABLE))
105 return -EROFS;
106
107 *retlen = 0;
108
109 for (i = 0; i < concat->num_subdev; i++) {
110 struct mtd_info *subdev = concat->subdev[i];
111 size_t size, retsize;
112
113 if (to >= subdev->size) {
114 size = 0;
115 to -= subdev->size;
116 continue;
117 }
118 if (to + len > subdev->size)
119 size = subdev->size - to;
120 else
121 size = len;
122
123 if (!(subdev->flags & MTD_WRITEABLE))
124 err = -EROFS;
125 else
126 err = subdev->write(subdev, to, size, &retsize, buf);
127
128 if (err)
129 break;
130
131 *retlen += retsize;
132 len -= size;
133 if (len == 0)
134 break;
135
136 err = -EINVAL;
137 buf += size;
138 to = 0;
139 }
140 return err;
141}
142
143static int
144concat_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
145 size_t * retlen, u_char * buf, u_char * eccbuf,
146 struct nand_oobinfo *oobsel)
147{
148 struct mtd_concat *concat = CONCAT(mtd);
149 int err = -EINVAL;
150 int i;
151
152 *retlen = 0;
153
154 for (i = 0; i < concat->num_subdev; i++) {
155 struct mtd_info *subdev = concat->subdev[i];
156 size_t size, retsize;
157
158 if (from >= subdev->size) {
159 /* Not destined for this subdev */
160 size = 0;
161 from -= subdev->size;
162 continue;
163 }
164
165 if (from + len > subdev->size)
166 /* First part goes into this subdev */
167 size = subdev->size - from;
168 else
169 /* Entire transaction goes into this subdev */
170 size = len;
171
172 if (subdev->read_ecc)
173 err = subdev->read_ecc(subdev, from, size,
174 &retsize, buf, eccbuf, oobsel);
175 else
176 err = -EINVAL;
177
178 if (err)
179 break;
180
181 *retlen += retsize;
182 len -= size;
183 if (len == 0)
184 break;
185
186 err = -EINVAL;
187 buf += size;
188 if (eccbuf) {
189 eccbuf += subdev->oobsize;
190 /* in nand.c at least, eccbufs are
191 tagged with 2 (int)eccstatus'; we
192 must account for these */
193 eccbuf += 2 * (sizeof (int));
194 }
195 from = 0;
196 }
197 return err;
198}
199
200static int
201concat_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
202 size_t * retlen, const u_char * buf, u_char * eccbuf,
203 struct nand_oobinfo *oobsel)
204{
205 struct mtd_concat *concat = CONCAT(mtd);
206 int err = -EINVAL;
207 int i;
208
209 if (!(mtd->flags & MTD_WRITEABLE))
210 return -EROFS;
211
212 *retlen = 0;
213
214 for (i = 0; i < concat->num_subdev; i++) {
215 struct mtd_info *subdev = concat->subdev[i];
216 size_t size, retsize;
217
218 if (to >= subdev->size) {
219 size = 0;
220 to -= subdev->size;
221 continue;
222 }
223 if (to + len > subdev->size)
224 size = subdev->size - to;
225 else
226 size = len;
227
228 if (!(subdev->flags & MTD_WRITEABLE))
229 err = -EROFS;
230 else if (subdev->write_ecc)
231 err = subdev->write_ecc(subdev, to, size,
232 &retsize, buf, eccbuf, oobsel);
233 else
234 err = -EINVAL;
235
236 if (err)
237 break;
238
239 *retlen += retsize;
240 len -= size;
241 if (len == 0)
242 break;
243
244 err = -EINVAL;
245 buf += size;
246 if (eccbuf)
247 eccbuf += subdev->oobsize;
248 to = 0;
249 }
250 return err;
251}
252
e8d32937
AB
253static int
254concat_writev_ecc(struct mtd_info *mtd, const struct kvec *vecs,
255 unsigned long count, loff_t to, size_t * retlen,
256 u_char *eccbuf, struct nand_oobinfo *oobsel)
257{
258 struct mtd_concat *concat = CONCAT(mtd);
259 struct kvec *vecs_copy;
260 unsigned long entry_low, entry_high;
261 size_t total_len = 0;
262 int i;
263 int err = -EINVAL;
264
265 if (!(mtd->flags & MTD_WRITEABLE))
266 return -EROFS;
267
268 *retlen = 0;
269
270 /* Calculate total length of data */
271 for (i = 0; i < count; i++)
272 total_len += vecs[i].iov_len;
273
274 /* Do not allow write past end of device */
275 if ((to + total_len) > mtd->size)
276 return -EINVAL;
277
278 /* Check alignment */
fd0e5187
DW
279 if (mtd->oobblock > 1)
280 if ((to % mtd->oobblock) || (total_len % mtd->oobblock))
e8d32937
AB
281 return -EINVAL;
282
283 /* make a copy of vecs */
284 vecs_copy = kmalloc(sizeof(struct kvec) * count, GFP_KERNEL);
285 if (!vecs_copy)
286 return -ENOMEM;
287 memcpy(vecs_copy, vecs, sizeof(struct kvec) * count);
288
289 entry_low = 0;
290 for (i = 0; i < concat->num_subdev; i++) {
291 struct mtd_info *subdev = concat->subdev[i];
292 size_t size, wsize, retsize, old_iov_len;
293
294 if (to >= subdev->size) {
295 to -= subdev->size;
296 continue;
297 }
298
299 size = min(total_len, (size_t)(subdev->size - to));
300 wsize = size; /* store for future use */
301
302 entry_high = entry_low;
303 while (entry_high < count) {
304 if (size <= vecs_copy[entry_high].iov_len)
305 break;
306 size -= vecs_copy[entry_high++].iov_len;
307 }
308
309 old_iov_len = vecs_copy[entry_high].iov_len;
310 vecs_copy[entry_high].iov_len = size;
311
312 if (!(subdev->flags & MTD_WRITEABLE))
313 err = -EROFS;
314 else if (eccbuf)
315 err = subdev->writev_ecc(subdev, &vecs_copy[entry_low],
316 entry_high - entry_low + 1, to, &retsize,
317 eccbuf, oobsel);
318 else
319 err = subdev->writev(subdev, &vecs_copy[entry_low],
320 entry_high - entry_low + 1, to, &retsize);
321
322 vecs_copy[entry_high].iov_len = old_iov_len - size;
323 vecs_copy[entry_high].iov_base += size;
324
325 entry_low = entry_high;
326
327 if (err)
328 break;
329
330 *retlen += retsize;
331 total_len -= wsize;
332 if (concat->mtd.type == MTD_NANDFLASH && eccbuf)
333 eccbuf += mtd->oobavail * (wsize / mtd->oobblock);
334
335 if (total_len == 0)
336 break;
337
338 err = -EINVAL;
339 to = 0;
340 }
341
342 kfree(vecs_copy);
343 return err;
344}
345
346static int
347concat_writev(struct mtd_info *mtd, const struct kvec *vecs,
348 unsigned long count, loff_t to, size_t * retlen)
349{
350 return concat_writev_ecc(mtd, vecs, count, to, retlen, NULL, NULL);
351}
352
1da177e4
LT
353static int
354concat_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
355 size_t * retlen, u_char * buf)
356{
357 struct mtd_concat *concat = CONCAT(mtd);
358 int err = -EINVAL;
359 int i;
360
361 *retlen = 0;
362
363 for (i = 0; i < concat->num_subdev; i++) {
364 struct mtd_info *subdev = concat->subdev[i];
365 size_t size, retsize;
366
367 if (from >= subdev->size) {
368 /* Not destined for this subdev */
369 size = 0;
370 from -= subdev->size;
371 continue;
372 }
373 if (from + len > subdev->size)
374 /* First part goes into this subdev */
375 size = subdev->size - from;
376 else
377 /* Entire transaction goes into this subdev */
378 size = len;
379
380 if (subdev->read_oob)
381 err = subdev->read_oob(subdev, from, size,
382 &retsize, buf);
383 else
384 err = -EINVAL;
385
386 if (err)
387 break;
388
389 *retlen += retsize;
390 len -= size;
391 if (len == 0)
392 break;
393
394 err = -EINVAL;
395 buf += size;
396 from = 0;
397 }
398 return err;
399}
400
401static int
402concat_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
403 size_t * retlen, const u_char * buf)
404{
405 struct mtd_concat *concat = CONCAT(mtd);
406 int err = -EINVAL;
407 int i;
408
409 if (!(mtd->flags & MTD_WRITEABLE))
410 return -EROFS;
411
412 *retlen = 0;
413
414 for (i = 0; i < concat->num_subdev; i++) {
415 struct mtd_info *subdev = concat->subdev[i];
416 size_t size, retsize;
417
418 if (to >= subdev->size) {
419 size = 0;
420 to -= subdev->size;
421 continue;
422 }
423 if (to + len > subdev->size)
424 size = subdev->size - to;
425 else
426 size = len;
427
428 if (!(subdev->flags & MTD_WRITEABLE))
429 err = -EROFS;
430 else if (subdev->write_oob)
431 err = subdev->write_oob(subdev, to, size, &retsize,
432 buf);
433 else
434 err = -EINVAL;
435
436 if (err)
437 break;
438
439 *retlen += retsize;
440 len -= size;
441 if (len == 0)
442 break;
443
444 err = -EINVAL;
445 buf += size;
446 to = 0;
447 }
448 return err;
449}
450
451static void concat_erase_callback(struct erase_info *instr)
452{
453 wake_up((wait_queue_head_t *) instr->priv);
454}
455
456static int concat_dev_erase(struct mtd_info *mtd, struct erase_info *erase)
457{
458 int err;
459 wait_queue_head_t waitq;
460 DECLARE_WAITQUEUE(wait, current);
461
462 /*
463 * This code was stol^H^H^H^Hinspired by mtdchar.c
464 */
465 init_waitqueue_head(&waitq);
466
467 erase->mtd = mtd;
468 erase->callback = concat_erase_callback;
469 erase->priv = (unsigned long) &waitq;
470
471 /*
472 * FIXME: Allow INTERRUPTIBLE. Which means
473 * not having the wait_queue head on the stack.
474 */
475 err = mtd->erase(mtd, erase);
476 if (!err) {
477 set_current_state(TASK_UNINTERRUPTIBLE);
478 add_wait_queue(&waitq, &wait);
479 if (erase->state != MTD_ERASE_DONE
480 && erase->state != MTD_ERASE_FAILED)
481 schedule();
482 remove_wait_queue(&waitq, &wait);
483 set_current_state(TASK_RUNNING);
484
485 err = (erase->state == MTD_ERASE_FAILED) ? -EIO : 0;
486 }
487 return err;
488}
489
490static int concat_erase(struct mtd_info *mtd, struct erase_info *instr)
491{
492 struct mtd_concat *concat = CONCAT(mtd);
493 struct mtd_info *subdev;
494 int i, err;
495 u_int32_t length, offset = 0;
496 struct erase_info *erase;
497
498 if (!(mtd->flags & MTD_WRITEABLE))
499 return -EROFS;
500
501 if (instr->addr > concat->mtd.size)
502 return -EINVAL;
503
504 if (instr->len + instr->addr > concat->mtd.size)
505 return -EINVAL;
506
507 /*
508 * Check for proper erase block alignment of the to-be-erased area.
509 * It is easier to do this based on the super device's erase
510 * region info rather than looking at each particular sub-device
511 * in turn.
512 */
513 if (!concat->mtd.numeraseregions) {
514 /* the easy case: device has uniform erase block size */
515 if (instr->addr & (concat->mtd.erasesize - 1))
516 return -EINVAL;
517 if (instr->len & (concat->mtd.erasesize - 1))
518 return -EINVAL;
519 } else {
520 /* device has variable erase size */
521 struct mtd_erase_region_info *erase_regions =
522 concat->mtd.eraseregions;
523
524 /*
525 * Find the erase region where the to-be-erased area begins:
526 */
527 for (i = 0; i < concat->mtd.numeraseregions &&
528 instr->addr >= erase_regions[i].offset; i++) ;
529 --i;
530
531 /*
532 * Now erase_regions[i] is the region in which the
533 * to-be-erased area begins. Verify that the starting
534 * offset is aligned to this region's erase size:
535 */
536 if (instr->addr & (erase_regions[i].erasesize - 1))
537 return -EINVAL;
538
539 /*
540 * now find the erase region where the to-be-erased area ends:
541 */
542 for (; i < concat->mtd.numeraseregions &&
543 (instr->addr + instr->len) >= erase_regions[i].offset;
544 ++i) ;
545 --i;
546 /*
547 * check if the ending offset is aligned to this region's erase size
548 */
549 if ((instr->addr + instr->len) & (erase_regions[i].erasesize -
550 1))
551 return -EINVAL;
552 }
553
554 instr->fail_addr = 0xffffffff;
555
556 /* make a local copy of instr to avoid modifying the caller's struct */
557 erase = kmalloc(sizeof (struct erase_info), GFP_KERNEL);
558
559 if (!erase)
560 return -ENOMEM;
561
562 *erase = *instr;
563 length = instr->len;
564
565 /*
566 * find the subdevice where the to-be-erased area begins, adjust
567 * starting offset to be relative to the subdevice start
568 */
569 for (i = 0; i < concat->num_subdev; i++) {
570 subdev = concat->subdev[i];
571 if (subdev->size <= erase->addr) {
572 erase->addr -= subdev->size;
573 offset += subdev->size;
574 } else {
575 break;
576 }
577 }
578
579 /* must never happen since size limit has been verified above */
373ebfbf 580 BUG_ON(i >= concat->num_subdev);
1da177e4
LT
581
582 /* now do the erase: */
583 err = 0;
584 for (; length > 0; i++) {
585 /* loop for all subdevices affected by this request */
586 subdev = concat->subdev[i]; /* get current subdevice */
587
588 /* limit length to subdevice's size: */
589 if (erase->addr + length > subdev->size)
590 erase->len = subdev->size - erase->addr;
591 else
592 erase->len = length;
593
594 if (!(subdev->flags & MTD_WRITEABLE)) {
595 err = -EROFS;
596 break;
597 }
598 length -= erase->len;
599 if ((err = concat_dev_erase(subdev, erase))) {
600 /* sanity check: should never happen since
601 * block alignment has been checked above */
373ebfbf 602 BUG_ON(err == -EINVAL);
1da177e4
LT
603 if (erase->fail_addr != 0xffffffff)
604 instr->fail_addr = erase->fail_addr + offset;
605 break;
606 }
607 /*
608 * erase->addr specifies the offset of the area to be
609 * erased *within the current subdevice*. It can be
610 * non-zero only the first time through this loop, i.e.
611 * for the first subdevice where blocks need to be erased.
612 * All the following erases must begin at the start of the
613 * current subdevice, i.e. at offset zero.
614 */
615 erase->addr = 0;
616 offset += subdev->size;
617 }
618 instr->state = erase->state;
619 kfree(erase);
620 if (err)
621 return err;
622
623 if (instr->callback)
624 instr->callback(instr);
625 return 0;
626}
627
628static int concat_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
629{
630 struct mtd_concat *concat = CONCAT(mtd);
631 int i, err = -EINVAL;
632
633 if ((len + ofs) > mtd->size)
634 return -EINVAL;
635
636 for (i = 0; i < concat->num_subdev; i++) {
637 struct mtd_info *subdev = concat->subdev[i];
638 size_t size;
639
640 if (ofs >= subdev->size) {
641 size = 0;
642 ofs -= subdev->size;
643 continue;
644 }
645 if (ofs + len > subdev->size)
646 size = subdev->size - ofs;
647 else
648 size = len;
649
650 err = subdev->lock(subdev, ofs, size);
651
652 if (err)
653 break;
654
655 len -= size;
656 if (len == 0)
657 break;
658
659 err = -EINVAL;
660 ofs = 0;
661 }
662
663 return err;
664}
665
666static int concat_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
667{
668 struct mtd_concat *concat = CONCAT(mtd);
669 int i, err = 0;
670
671 if ((len + ofs) > mtd->size)
672 return -EINVAL;
673
674 for (i = 0; i < concat->num_subdev; i++) {
675 struct mtd_info *subdev = concat->subdev[i];
676 size_t size;
677
678 if (ofs >= subdev->size) {
679 size = 0;
680 ofs -= subdev->size;
681 continue;
682 }
683 if (ofs + len > subdev->size)
684 size = subdev->size - ofs;
685 else
686 size = len;
687
688 err = subdev->unlock(subdev, ofs, size);
689
690 if (err)
691 break;
692
693 len -= size;
694 if (len == 0)
695 break;
696
697 err = -EINVAL;
698 ofs = 0;
699 }
700
701 return err;
702}
703
704static void concat_sync(struct mtd_info *mtd)
705{
706 struct mtd_concat *concat = CONCAT(mtd);
707 int i;
708
709 for (i = 0; i < concat->num_subdev; i++) {
710 struct mtd_info *subdev = concat->subdev[i];
711 subdev->sync(subdev);
712 }
713}
714
715static int concat_suspend(struct mtd_info *mtd)
716{
717 struct mtd_concat *concat = CONCAT(mtd);
718 int i, rc = 0;
719
720 for (i = 0; i < concat->num_subdev; i++) {
721 struct mtd_info *subdev = concat->subdev[i];
722 if ((rc = subdev->suspend(subdev)) < 0)
723 return rc;
724 }
725 return rc;
726}
727
728static void concat_resume(struct mtd_info *mtd)
729{
730 struct mtd_concat *concat = CONCAT(mtd);
731 int i;
732
733 for (i = 0; i < concat->num_subdev; i++) {
734 struct mtd_info *subdev = concat->subdev[i];
735 subdev->resume(subdev);
736 }
737}
738
e8d32937
AB
739static int concat_block_isbad(struct mtd_info *mtd, loff_t ofs)
740{
741 struct mtd_concat *concat = CONCAT(mtd);
742 int i, res = 0;
743
744 if (!concat->subdev[0]->block_isbad)
745 return res;
746
747 if (ofs > mtd->size)
748 return -EINVAL;
749
750 for (i = 0; i < concat->num_subdev; i++) {
751 struct mtd_info *subdev = concat->subdev[i];
752
753 if (ofs >= subdev->size) {
754 ofs -= subdev->size;
755 continue;
756 }
757
758 res = subdev->block_isbad(subdev, ofs);
759 break;
760 }
761
762 return res;
763}
764
765static int concat_block_markbad(struct mtd_info *mtd, loff_t ofs)
766{
767 struct mtd_concat *concat = CONCAT(mtd);
768 int i, err = -EINVAL;
769
770 if (!concat->subdev[0]->block_markbad)
771 return 0;
772
773 if (ofs > mtd->size)
774 return -EINVAL;
775
776 for (i = 0; i < concat->num_subdev; i++) {
777 struct mtd_info *subdev = concat->subdev[i];
778
779 if (ofs >= subdev->size) {
780 ofs -= subdev->size;
781 continue;
782 }
783
784 err = subdev->block_markbad(subdev, ofs);
785 break;
786 }
787
788 return err;
789}
790
1da177e4
LT
791/*
792 * This function constructs a virtual MTD device by concatenating
793 * num_devs MTD devices. A pointer to the new device object is
794 * stored to *new_dev upon success. This function does _not_
795 * register any devices: this is the caller's responsibility.
796 */
797struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to concatenate */
798 int num_devs, /* number of subdevices */
799 char *name)
800{ /* name for the new device */
801 int i;
802 size_t size;
803 struct mtd_concat *concat;
804 u_int32_t max_erasesize, curr_erasesize;
805 int num_erase_region;
806
807 printk(KERN_NOTICE "Concatenating MTD devices:\n");
808 for (i = 0; i < num_devs; i++)
809 printk(KERN_NOTICE "(%d): \"%s\"\n", i, subdev[i]->name);
810 printk(KERN_NOTICE "into device \"%s\"\n", name);
811
812 /* allocate the device structure */
813 size = SIZEOF_STRUCT_MTD_CONCAT(num_devs);
814 concat = kmalloc(size, GFP_KERNEL);
815 if (!concat) {
816 printk
817 ("memory allocation error while creating concatenated device \"%s\"\n",
818 name);
819 return NULL;
820 }
821 memset(concat, 0, size);
822 concat->subdev = (struct mtd_info **) (concat + 1);
823
824 /*
825 * Set up the new "super" device's MTD object structure, check for
826 * incompatibilites between the subdevices.
827 */
828 concat->mtd.type = subdev[0]->type;
829 concat->mtd.flags = subdev[0]->flags;
830 concat->mtd.size = subdev[0]->size;
831 concat->mtd.erasesize = subdev[0]->erasesize;
832 concat->mtd.oobblock = subdev[0]->oobblock;
833 concat->mtd.oobsize = subdev[0]->oobsize;
834 concat->mtd.ecctype = subdev[0]->ecctype;
835 concat->mtd.eccsize = subdev[0]->eccsize;
836 if (subdev[0]->read_ecc)
837 concat->mtd.read_ecc = concat_read_ecc;
838 if (subdev[0]->write_ecc)
839 concat->mtd.write_ecc = concat_write_ecc;
e8d32937
AB
840 if (subdev[0]->writev)
841 concat->mtd.writev = concat_writev;
842 if (subdev[0]->writev_ecc)
843 concat->mtd.writev_ecc = concat_writev_ecc;
1da177e4
LT
844 if (subdev[0]->read_oob)
845 concat->mtd.read_oob = concat_read_oob;
846 if (subdev[0]->write_oob)
847 concat->mtd.write_oob = concat_write_oob;
e8d32937
AB
848 if (subdev[0]->block_isbad)
849 concat->mtd.block_isbad = concat_block_isbad;
850 if (subdev[0]->block_markbad)
851 concat->mtd.block_markbad = concat_block_markbad;
1da177e4
LT
852
853 concat->subdev[0] = subdev[0];
854
855 for (i = 1; i < num_devs; i++) {
856 if (concat->mtd.type != subdev[i]->type) {
857 kfree(concat);
858 printk("Incompatible device type on \"%s\"\n",
859 subdev[i]->name);
860 return NULL;
861 }
862 if (concat->mtd.flags != subdev[i]->flags) {
863 /*
864 * Expect all flags except MTD_WRITEABLE to be
865 * equal on all subdevices.
866 */
867 if ((concat->mtd.flags ^ subdev[i]->
868 flags) & ~MTD_WRITEABLE) {
869 kfree(concat);
870 printk("Incompatible device flags on \"%s\"\n",
871 subdev[i]->name);
872 return NULL;
873 } else
874 /* if writeable attribute differs,
875 make super device writeable */
876 concat->mtd.flags |=
877 subdev[i]->flags & MTD_WRITEABLE;
878 }
879 concat->mtd.size += subdev[i]->size;
880 if (concat->mtd.oobblock != subdev[i]->oobblock ||
881 concat->mtd.oobsize != subdev[i]->oobsize ||
882 concat->mtd.ecctype != subdev[i]->ecctype ||
883 concat->mtd.eccsize != subdev[i]->eccsize ||
884 !concat->mtd.read_ecc != !subdev[i]->read_ecc ||
885 !concat->mtd.write_ecc != !subdev[i]->write_ecc ||
886 !concat->mtd.read_oob != !subdev[i]->read_oob ||
887 !concat->mtd.write_oob != !subdev[i]->write_oob) {
888 kfree(concat);
889 printk("Incompatible OOB or ECC data on \"%s\"\n",
890 subdev[i]->name);
891 return NULL;
892 }
893 concat->subdev[i] = subdev[i];
894
895 }
896
e8d32937
AB
897 if(concat->mtd.type == MTD_NANDFLASH)
898 memcpy(&concat->mtd.oobinfo, &subdev[0]->oobinfo,
899 sizeof(struct nand_oobinfo));
900
1da177e4
LT
901 concat->num_subdev = num_devs;
902 concat->mtd.name = name;
903
1da177e4
LT
904 concat->mtd.erase = concat_erase;
905 concat->mtd.read = concat_read;
906 concat->mtd.write = concat_write;
907 concat->mtd.sync = concat_sync;
908 concat->mtd.lock = concat_lock;
909 concat->mtd.unlock = concat_unlock;
910 concat->mtd.suspend = concat_suspend;
911 concat->mtd.resume = concat_resume;
912
913 /*
914 * Combine the erase block size info of the subdevices:
915 *
916 * first, walk the map of the new device and see how
917 * many changes in erase size we have
918 */
919 max_erasesize = curr_erasesize = subdev[0]->erasesize;
920 num_erase_region = 1;
921 for (i = 0; i < num_devs; i++) {
922 if (subdev[i]->numeraseregions == 0) {
923 /* current subdevice has uniform erase size */
924 if (subdev[i]->erasesize != curr_erasesize) {
925 /* if it differs from the last subdevice's erase size, count it */
926 ++num_erase_region;
927 curr_erasesize = subdev[i]->erasesize;
928 if (curr_erasesize > max_erasesize)
929 max_erasesize = curr_erasesize;
930 }
931 } else {
932 /* current subdevice has variable erase size */
933 int j;
934 for (j = 0; j < subdev[i]->numeraseregions; j++) {
935
936 /* walk the list of erase regions, count any changes */
937 if (subdev[i]->eraseregions[j].erasesize !=
938 curr_erasesize) {
939 ++num_erase_region;
940 curr_erasesize =
941 subdev[i]->eraseregions[j].
942 erasesize;
943 if (curr_erasesize > max_erasesize)
944 max_erasesize = curr_erasesize;
945 }
946 }
947 }
948 }
949
950 if (num_erase_region == 1) {
951 /*
952 * All subdevices have the same uniform erase size.
953 * This is easy:
954 */
955 concat->mtd.erasesize = curr_erasesize;
956 concat->mtd.numeraseregions = 0;
957 } else {
958 /*
959 * erase block size varies across the subdevices: allocate
960 * space to store the data describing the variable erase regions
961 */
962 struct mtd_erase_region_info *erase_region_p;
963 u_int32_t begin, position;
964
965 concat->mtd.erasesize = max_erasesize;
966 concat->mtd.numeraseregions = num_erase_region;
967 concat->mtd.eraseregions = erase_region_p =
968 kmalloc(num_erase_region *
969 sizeof (struct mtd_erase_region_info), GFP_KERNEL);
970 if (!erase_region_p) {
971 kfree(concat);
972 printk
973 ("memory allocation error while creating erase region list"
974 " for device \"%s\"\n", name);
975 return NULL;
976 }
977
978 /*
979 * walk the map of the new device once more and fill in
980 * in erase region info:
981 */
982 curr_erasesize = subdev[0]->erasesize;
983 begin = position = 0;
984 for (i = 0; i < num_devs; i++) {
985 if (subdev[i]->numeraseregions == 0) {
986 /* current subdevice has uniform erase size */
987 if (subdev[i]->erasesize != curr_erasesize) {
988 /*
989 * fill in an mtd_erase_region_info structure for the area
990 * we have walked so far:
991 */
992 erase_region_p->offset = begin;
993 erase_region_p->erasesize =
994 curr_erasesize;
995 erase_region_p->numblocks =
996 (position - begin) / curr_erasesize;
997 begin = position;
998
999 curr_erasesize = subdev[i]->erasesize;
1000 ++erase_region_p;
1001 }
1002 position += subdev[i]->size;
1003 } else {
1004 /* current subdevice has variable erase size */
1005 int j;
1006 for (j = 0; j < subdev[i]->numeraseregions; j++) {
1007 /* walk the list of erase regions, count any changes */
1008 if (subdev[i]->eraseregions[j].
1009 erasesize != curr_erasesize) {
1010 erase_region_p->offset = begin;
1011 erase_region_p->erasesize =
1012 curr_erasesize;
1013 erase_region_p->numblocks =
1014 (position -
1015 begin) / curr_erasesize;
1016 begin = position;
1017
1018 curr_erasesize =
1019 subdev[i]->eraseregions[j].
1020 erasesize;
1021 ++erase_region_p;
1022 }
1023 position +=
1024 subdev[i]->eraseregions[j].
1025 numblocks * curr_erasesize;
1026 }
1027 }
1028 }
1029 /* Now write the final entry */
1030 erase_region_p->offset = begin;
1031 erase_region_p->erasesize = curr_erasesize;
1032 erase_region_p->numblocks = (position - begin) / curr_erasesize;
1033 }
1034
1035 return &concat->mtd;
1036}
1037
97894cda 1038/*
1da177e4
LT
1039 * This function destroys an MTD object obtained from concat_mtd_devs()
1040 */
1041
1042void mtd_concat_destroy(struct mtd_info *mtd)
1043{
1044 struct mtd_concat *concat = CONCAT(mtd);
1045 if (concat->mtd.numeraseregions)
1046 kfree(concat->mtd.eraseregions);
1047 kfree(concat);
1048}
1049
1050EXPORT_SYMBOL(mtd_concat_create);
1051EXPORT_SYMBOL(mtd_concat_destroy);
1052
1053MODULE_LICENSE("GPL");
1054MODULE_AUTHOR("Robert Kaiser <rkaiser@sysgo.de>");
1055MODULE_DESCRIPTION("Generic support for concatenating of MTD devices");