[linux-2.6-block.git] / drivers / mmc / host / sdhci-pxav3.c

/*
 * Copyright (C) 2010 Marvell International Ltd.
 *		Zhangfei Gao <zhangfei.gao@marvell.com>
 *		Kevin Wang <dwang4@marvell.com>
 *		Mingwei Wang <mwwang@marvell.com>
 *		Philip Rakity <prakity@marvell.com>
 *		Mark Brown <markb@marvell.com>
 *
 * This software is licensed under the terms of the GNU General Public
 * License version 2, as published by the Free Software Foundation, and
 * may be copied, distributed, and modified under those terms.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 */
#include <linux/err.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/mmc/slot-gpio.h>
#include <linux/platform_data/pxa_sdhci.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/mbus.h>

#include "sdhci.h"
#include "sdhci-pltfm.h"

#define PXAV3_RPM_DELAY_MS     50

#define SD_CLOCK_BURST_SIZE_SETUP		0x10A
#define SDCLK_SEL	0x100
#define SDCLK_DELAY_SHIFT	9
#define SDCLK_DELAY_MASK	0x1f

#define SD_CFG_FIFO_PARAM       0x100
#define SDCFG_GEN_PAD_CLK_ON	(1<<6)
#define SDCFG_GEN_PAD_CLK_CNT_MASK	0xFF
#define SDCFG_GEN_PAD_CLK_CNT_SHIFT	24

#define SD_SPI_MODE          0x108
#define SD_CE_ATA_1          0x10C

#define SD_CE_ATA_2          0x10E
#define SDCE_MISC_INT		(1<<2)
#define SDCE_MISC_INT_EN	(1<<1)

struct sdhci_pxa {
	struct clk *clk_core;
	struct clk *clk_io;
	u8	power_mode;
	void __iomem *sdio3_conf_reg;
};

/*
 * These registers are relative to the second register region, for the
 * MBus bridge.
 */
#define SDHCI_WINDOW_CTRL(i)	(0x80 + ((i) << 3))
#define SDHCI_WINDOW_BASE(i)	(0x84 + ((i) << 3))
#define SDHCI_MAX_WIN_NUM	8

/*
 * Fields below belong to SDIO3 Configuration Register (third register
 * region for the Armada 38x flavor)
 */

#define SDIO3_CONF_CLK_INV	BIT(0)
#define SDIO3_CONF_SD_FB_CLK	BIT(2)

static int mv_conf_mbus_windows(struct platform_device *pdev,
				const struct mbus_dram_target_info *dram)
{
	int i;
	void __iomem *regs;
	struct resource *res;

	if (!dram) {
		dev_err(&pdev->dev, "no mbus dram info\n");
		return -EINVAL;
	}

	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
	if (!res) {
		dev_err(&pdev->dev, "cannot get mbus registers\n");
		return -EINVAL;
	}

	regs = ioremap(res->start, resource_size(res));
	if (!regs) {
		dev_err(&pdev->dev, "cannot map mbus registers\n");
		return -ENOMEM;
	}

	for (i = 0; i < SDHCI_MAX_WIN_NUM; i++) {
		writel(0, regs + SDHCI_WINDOW_CTRL(i));
		writel(0, regs + SDHCI_WINDOW_BASE(i));
	}

	for (i = 0; i < dram->num_cs; i++) {
		const struct mbus_dram_window *cs = dram->cs + i;

		/* Write size, attributes and target id to control register */
		writel(((cs->size - 1) & 0xffff0000) |
			(cs->mbus_attr << 8) |
			(dram->mbus_dram_target_id << 4) | 1,
			regs + SDHCI_WINDOW_CTRL(i));
		/* Write base address to base register */
		writel(cs->base, regs + SDHCI_WINDOW_BASE(i));
	}

	iounmap(regs);

	return 0;
}

static int armada_38x_quirks(struct platform_device *pdev,
			     struct sdhci_host *host)
{
	struct device_node *np = pdev->dev.of_node;
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
	struct resource *res;

	host->quirks &= ~SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN;
	host->quirks |= SDHCI_QUIRK_MISSING_CAPS;

	host->caps = sdhci_readl(host, SDHCI_CAPABILITIES);
	host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
					   "conf-sdio3");
	if (res) {
		pxa->sdio3_conf_reg = devm_ioremap_resource(&pdev->dev, res);
		if (IS_ERR(pxa->sdio3_conf_reg))
			return PTR_ERR(pxa->sdio3_conf_reg);
	} else {
		/*
		 * According to erratum 'FE-2946959' both SDR50 and DDR50
		 * modes require specific clock adjustments in SDIO3
		 * Configuration register, if the adjustment is not done,
		 * remove them from the capabilities.
		 */
		host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50);

		dev_warn(&pdev->dev, "conf-sdio3 register not found: disabling SDR50 and DDR50 modes.\nConsider updating your dtb\n");
	}

	/*
	 * According to erratum 'ERR-7878951' Armada 38x SDHCI
	 * controller has different capabilities than the ones shown
	 * in its registers
	 */
	if (of_property_read_bool(np, "no-1-8-v")) {
		host->caps &= ~SDHCI_CAN_VDD_180;
		host->mmc->caps &= ~MMC_CAP_1_8V_DDR;
	} else {
		host->caps &= ~SDHCI_CAN_VDD_330;
	}
	host->caps1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_USE_SDR50_TUNING);

	return 0;
}

static void pxav3_reset(struct sdhci_host *host, u8 mask)
{
	struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
	struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;

	sdhci_reset(host, mask);

	if (mask == SDHCI_RESET_ALL) {
		/*
		 * tune timing of read data/command when crc error happen
		 * no performance impact
		 */
		if (pdata && 0 != pdata->clk_delay_cycles) {
			u16 tmp;

			tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
			tmp |= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK)
				<< SDCLK_DELAY_SHIFT;
			tmp |= SDCLK_SEL;
			writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
		}
	}
}

#define MAX_WAIT_COUNT 5
static void pxav3_gen_init_74_clocks(struct sdhci_host *host, u8 power_mode)
{
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
	u16 tmp;
	int count;

	if (pxa->power_mode == MMC_POWER_UP
			&& power_mode == MMC_POWER_ON) {

		dev_dbg(mmc_dev(host->mmc),
				"%s: slot->power_mode = %d,"
				"ios->power_mode = %d\n",
				__func__,
				pxa->power_mode,
				power_mode);

		/* set we want notice of when 74 clocks are sent */
		tmp = readw(host->ioaddr + SD_CE_ATA_2);
		tmp |= SDCE_MISC_INT_EN;
		writew(tmp, host->ioaddr + SD_CE_ATA_2);

		/* start sending the 74 clocks */
		tmp = readw(host->ioaddr + SD_CFG_FIFO_PARAM);
		tmp |= SDCFG_GEN_PAD_CLK_ON;
		writew(tmp, host->ioaddr + SD_CFG_FIFO_PARAM);

		/* slowest speed is about 100KHz or 10usec per clock */
		udelay(740);
		count = 0;

		while (count++ < MAX_WAIT_COUNT) {
			if ((readw(host->ioaddr + SD_CE_ATA_2)
						& SDCE_MISC_INT) == 0)
				break;
			udelay(10);
		}

		if (count == MAX_WAIT_COUNT)
			dev_warn(mmc_dev(host->mmc), "74 clock interrupt not cleared\n");

		/* clear the interrupt bit if posted */
		tmp = readw(host->ioaddr + SD_CE_ATA_2);
		tmp |= SDCE_MISC_INT;
		writew(tmp, host->ioaddr + SD_CE_ATA_2);
	}
	pxa->power_mode = power_mode;
}

static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
{
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
	u16 ctrl_2;

	/*
	 * Set V18_EN -- UHS modes do not work without this.
	 * does not change signaling voltage
	 */
	ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);

	/* Select Bus Speed Mode for host */
	ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
	switch (uhs) {
	case MMC_TIMING_UHS_SDR12:
		ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
		break;
	case MMC_TIMING_UHS_SDR25:
		ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
		break;
	case MMC_TIMING_UHS_SDR50:
		ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180;
		break;
	case MMC_TIMING_UHS_SDR104:
		ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180;
		break;
	case MMC_TIMING_MMC_DDR52:
	case MMC_TIMING_UHS_DDR50:
		ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180;
		break;
	}

	/*
	 * Update SDIO3 Configuration register according to erratum
	 * FE-2946959
	 */
	if (pxa->sdio3_conf_reg) {
		u8 reg_val  = readb(pxa->sdio3_conf_reg);

		if (uhs == MMC_TIMING_UHS_SDR50 ||
		    uhs == MMC_TIMING_UHS_DDR50) {
			reg_val &= ~SDIO3_CONF_CLK_INV;
			reg_val |= SDIO3_CONF_SD_FB_CLK;
		} else if (uhs == MMC_TIMING_MMC_HS) {
			reg_val &= ~SDIO3_CONF_CLK_INV;
			reg_val &= ~SDIO3_CONF_SD_FB_CLK;
		} else {
			reg_val |= SDIO3_CONF_CLK_INV;
			reg_val &= ~SDIO3_CONF_SD_FB_CLK;
		}
		writeb(reg_val, pxa->sdio3_conf_reg);
	}

	sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
	dev_dbg(mmc_dev(host->mmc),
		"%s uhs = %d, ctrl_2 = %04X\n",
		__func__, uhs, ctrl_2);
}

static const struct sdhci_ops pxav3_sdhci_ops = {
	.set_clock = sdhci_set_clock,
	.platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
	.set_bus_width = sdhci_set_bus_width,
	.reset = pxav3_reset,
	.set_uhs_signaling = pxav3_set_uhs_signaling,
};

static struct sdhci_pltfm_data sdhci_pxav3_pdata = {
	.quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
		| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
		| SDHCI_QUIRK_32BIT_ADMA_SIZE
		| SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
	.ops = &pxav3_sdhci_ops,
};

#ifdef CONFIG_OF
static const struct of_device_id sdhci_pxav3_of_match[] = {
	{
		.compatible = "mrvl,pxav3-mmc",
	},
	{
		.compatible = "marvell,armada-380-sdhci",
	},
	{},
};
MODULE_DEVICE_TABLE(of, sdhci_pxav3_of_match);

static struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
{
	struct sdhci_pxa_platdata *pdata;
	struct device_node *np = dev->of_node;
	u32 clk_delay_cycles;

	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
	if (!pdata)
		return NULL;

	if (!of_property_read_u32(np, "mrvl,clk-delay-cycles",
				  &clk_delay_cycles))
		pdata->clk_delay_cycles = clk_delay_cycles;

	return pdata;
}
#else
static inline struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
{
	return NULL;
}
#endif

static int sdhci_pxav3_probe(struct platform_device *pdev)
{
	struct sdhci_pltfm_host *pltfm_host;
	struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
	struct device *dev = &pdev->dev;
	struct device_node *np = pdev->dev.of_node;
	struct sdhci_host *host = NULL;
	struct sdhci_pxa *pxa = NULL;
	const struct of_device_id *match;
	int ret;

	host = sdhci_pltfm_init(pdev, &sdhci_pxav3_pdata, sizeof(*pxa));
	if (IS_ERR(host))
		return PTR_ERR(host);

	pltfm_host = sdhci_priv(host);
	pxa = sdhci_pltfm_priv(pltfm_host);

	pxa->clk_io = devm_clk_get(dev, "io");
	if (IS_ERR(pxa->clk_io))
		pxa->clk_io = devm_clk_get(dev, NULL);
	if (IS_ERR(pxa->clk_io)) {
		dev_err(dev, "failed to get io clock\n");
		ret = PTR_ERR(pxa->clk_io);
		goto err_clk_get;
	}
	pltfm_host->clk = pxa->clk_io;
	clk_prepare_enable(pxa->clk_io);

	pxa->clk_core = devm_clk_get(dev, "core");
	if (!IS_ERR(pxa->clk_core))
		clk_prepare_enable(pxa->clk_core);

	/* enable 1/8V DDR capable */
	host->mmc->caps |= MMC_CAP_1_8V_DDR;

	if (of_device_is_compatible(np, "marvell,armada-380-sdhci")) {
		ret = armada_38x_quirks(pdev, host);
		if (ret < 0)
			goto err_mbus_win;
		ret = mv_conf_mbus_windows(pdev, mv_mbus_dram_info());
		if (ret < 0)
			goto err_mbus_win;
	}

	match = of_match_device(of_match_ptr(sdhci_pxav3_of_match), &pdev->dev);
	if (match) {
		ret = mmc_of_parse(host->mmc);
		if (ret)
			goto err_of_parse;
		sdhci_get_of_property(pdev);
		pdata = pxav3_get_mmc_pdata(dev);
		pdev->dev.platform_data = pdata;
	} else if (pdata) {
		/* on-chip device */
		if (pdata->flags & PXA_FLAG_CARD_PERMANENT)
			host->mmc->caps |= MMC_CAP_NONREMOVABLE;

		/* If slot design supports 8 bit data, indicate this to MMC. */
		if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
			host->mmc->caps |= MMC_CAP_8_BIT_DATA;

		if (pdata->quirks)
			host->quirks |= pdata->quirks;
		if (pdata->quirks2)
			host->quirks2 |= pdata->quirks2;
		if (pdata->host_caps)
			host->mmc->caps |= pdata->host_caps;
		if (pdata->host_caps2)
			host->mmc->caps2 |= pdata->host_caps2;
		if (pdata->pm_caps)
			host->mmc->pm_caps |= pdata->pm_caps;

		if (gpio_is_valid(pdata->ext_cd_gpio)) {
			ret = mmc_gpio_request_cd(host->mmc, pdata->ext_cd_gpio,
						  0);
			if (ret) {
				dev_err(mmc_dev(host->mmc),
					"failed to allocate card detect gpio\n");
				goto err_cd_req;
			}
		}
	}

	pm_runtime_get_noresume(&pdev->dev);
	pm_runtime_set_active(&pdev->dev);
	pm_runtime_set_autosuspend_delay(&pdev->dev, PXAV3_RPM_DELAY_MS);
	pm_runtime_use_autosuspend(&pdev->dev);
	pm_runtime_enable(&pdev->dev);
	pm_suspend_ignore_children(&pdev->dev, 1);

	ret = sdhci_add_host(host);
	if (ret) {
		dev_err(&pdev->dev, "failed to add host\n");
		goto err_add_host;
	}

	platform_set_drvdata(pdev, host);

	if (host->mmc->pm_caps & MMC_PM_WAKE_SDIO_IRQ)
		device_init_wakeup(&pdev->dev, 1);

	pm_runtime_put_autosuspend(&pdev->dev);

	return 0;

err_add_host:
	pm_runtime_disable(&pdev->dev);
	pm_runtime_put_noidle(&pdev->dev);
err_of_parse:
err_cd_req:
err_mbus_win:
	clk_disable_unprepare(pxa->clk_io);
	clk_disable_unprepare(pxa->clk_core);
err_clk_get:
	sdhci_pltfm_free(pdev);
	return ret;
}

static int sdhci_pxav3_remove(struct platform_device *pdev)
{
	struct sdhci_host *host = platform_get_drvdata(pdev);
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);

	pm_runtime_get_sync(&pdev->dev);
	pm_runtime_disable(&pdev->dev);
	pm_runtime_put_noidle(&pdev->dev);

	sdhci_remove_host(host, 1);

	clk_disable_unprepare(pxa->clk_io);
	clk_disable_unprepare(pxa->clk_core);

	sdhci_pltfm_free(pdev);

	return 0;
}

#ifdef CONFIG_PM_SLEEP
static int sdhci_pxav3_suspend(struct device *dev)
{
	int ret;
	struct sdhci_host *host = dev_get_drvdata(dev);

	pm_runtime_get_sync(dev);
	ret = sdhci_suspend_host(host);
	pm_runtime_mark_last_busy(dev);
	pm_runtime_put_autosuspend(dev);

	return ret;
}

static int sdhci_pxav3_resume(struct device *dev)
{
	int ret;
	struct sdhci_host *host = dev_get_drvdata(dev);

	pm_runtime_get_sync(dev);
	ret = sdhci_resume_host(host);
	pm_runtime_mark_last_busy(dev);
	pm_runtime_put_autosuspend(dev);

	return ret;
}
#endif

#ifdef CONFIG_PM
static int sdhci_pxav3_runtime_suspend(struct device *dev)
{
	struct sdhci_host *host = dev_get_drvdata(dev);
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
	int ret;

	ret = sdhci_runtime_suspend_host(host);
	if (ret)
		return ret;

	clk_disable_unprepare(pxa->clk_io);
	if (!IS_ERR(pxa->clk_core))
		clk_disable_unprepare(pxa->clk_core);

	return 0;
}

static int sdhci_pxav3_runtime_resume(struct device *dev)
{
	struct sdhci_host *host = dev_get_drvdata(dev);
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);

	clk_prepare_enable(pxa->clk_io);
	if (!IS_ERR(pxa->clk_core))
		clk_prepare_enable(pxa->clk_core);

	return sdhci_runtime_resume_host(host);
}
#endif

#ifdef CONFIG_PM
static const struct dev_pm_ops sdhci_pxav3_pmops = {
	SET_SYSTEM_SLEEP_PM_OPS(sdhci_pxav3_suspend, sdhci_pxav3_resume)
	SET_RUNTIME_PM_OPS(sdhci_pxav3_runtime_suspend,
		sdhci_pxav3_runtime_resume, NULL)
};

#define SDHCI_PXAV3_PMOPS (&sdhci_pxav3_pmops)

#else
#define SDHCI_PXAV3_PMOPS NULL
#endif

static struct platform_driver sdhci_pxav3_driver = {
	.driver		= {
		.name	= "sdhci-pxav3",
		.of_match_table = of_match_ptr(sdhci_pxav3_of_match),
		.pm	= SDHCI_PXAV3_PMOPS,
	},
	.probe		= sdhci_pxav3_probe,
	.remove		= sdhci_pxav3_remove,
};

module_platform_driver(sdhci_pxav3_driver);

MODULE_DESCRIPTION("SDHCI driver for pxav3");
MODULE_AUTHOR("Marvell International Ltd.");
MODULE_LICENSE("GPL v2");
Commit	Line	Data
a702c8ab ZG	1	/*
	2	* Copyright (C) 2010 Marvell International Ltd.
	3	* Zhangfei Gao <zhangfei.gao@marvell.com>
	4	* Kevin Wang <dwang4@marvell.com>
	5	* Mingwei Wang <mwwang@marvell.com>
	6	* Philip Rakity <prakity@marvell.com>
	7	* Mark Brown <markb@marvell.com>
	8	*
	9	* This software is licensed under the terms of the GNU General Public
	10	* License version 2, as published by the Free Software Foundation, and
	11	* may be copied, distributed, and modified under those terms.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	*/
	19	#include <linux/err.h>
	20	#include <linux/init.h>
	21	#include <linux/platform_device.h>
	22	#include <linux/clk.h>
	23	#include <linux/io.h>
	24	#include <linux/gpio.h>
	25	#include <linux/mmc/card.h>
	26	#include <linux/mmc/host.h>
8f63795c	27	#include <linux/mmc/slot-gpio.h>
bfed345e	28	#include <linux/platform_data/pxa_sdhci.h>
a702c8ab ZG	29	#include <linux/slab.h>
a702c8ab ZG	30	#include <linux/delay.h>
88b47679	31	#include <linux/module.h>
b650352d CB	32	#include <linux/of.h>
b650352d CB	33	#include <linux/of_device.h>
8f63795c	34	#include <linux/of_gpio.h>
bb691ae4 KL	35	#include <linux/pm.h>
bb691ae4 KL	36	#include <linux/pm_runtime.h>
5491ce3f	37	#include <linux/mbus.h>
b650352d	38
a702c8ab ZG	39	#include "sdhci.h"
	40	#include "sdhci-pltfm.h"
	41
bb691ae4 KL	42	#define PXAV3_RPM_DELAY_MS 50
bb691ae4 KL	43
a702c8ab ZG	44	#define SD_CLOCK_BURST_SIZE_SETUP 0x10A
	45	#define SDCLK_SEL 0x100
	46	#define SDCLK_DELAY_SHIFT 9
	47	#define SDCLK_DELAY_MASK 0x1f
	48
	49	#define SD_CFG_FIFO_PARAM 0x100
	50	#define SDCFG_GEN_PAD_CLK_ON (1<<6)
	51	#define SDCFG_GEN_PAD_CLK_CNT_MASK 0xFF
	52	#define SDCFG_GEN_PAD_CLK_CNT_SHIFT 24
	53
	54	#define SD_SPI_MODE 0x108
	55	#define SD_CE_ATA_1 0x10C
	56
	57	#define SD_CE_ATA_2 0x10E
	58	#define SDCE_MISC_INT (1<<2)
	59	#define SDCE_MISC_INT_EN (1<<1)
	60
cc9571e8	61	struct sdhci_pxa {
8afdc9cc	62	struct clk *clk_core;
8c96a7a3	63	struct clk *clk_io;
cc9571e8	64	u8 power_mode;
1140011e	65	void __iomem *sdio3_conf_reg;
cc9571e8 SH	66	};
cc9571e8 SH	67
5491ce3f MW	68	/*
	69	* These registers are relative to the second register region, for the
	70	* MBus bridge.
	71	*/
	72	#define SDHCI_WINDOW_CTRL(i) (0x80 + ((i) << 3))
	73	#define SDHCI_WINDOW_BASE(i) (0x84 + ((i) << 3))
	74	#define SDHCI_MAX_WIN_NUM 8
	75
1140011e MW	76	/*
	77	* Fields below belong to SDIO3 Configuration Register (third register
	78	* region for the Armada 38x flavor)
	79	*/
	80
	81	#define SDIO3_CONF_CLK_INV BIT(0)
	82	#define SDIO3_CONF_SD_FB_CLK BIT(2)
	83
5491ce3f MW	84	static int mv_conf_mbus_windows(struct platform_device *pdev,
	85	const struct mbus_dram_target_info *dram)
	86	{
	87	int i;
	88	void __iomem *regs;
	89	struct resource *res;
	90
	91	if (!dram) {
	92	dev_err(&pdev->dev, "no mbus dram info\n");
	93	return -EINVAL;
	94	}
	95
	96	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
	97	if (!res) {
	98	dev_err(&pdev->dev, "cannot get mbus registers\n");
	99	return -EINVAL;
	100	}
	101
	102	regs = ioremap(res->start, resource_size(res));
	103	if (!regs) {
	104	dev_err(&pdev->dev, "cannot map mbus registers\n");
	105	return -ENOMEM;
	106	}
	107
	108	for (i = 0; i < SDHCI_MAX_WIN_NUM; i++) {
	109	writel(0, regs + SDHCI_WINDOW_CTRL(i));
	110	writel(0, regs + SDHCI_WINDOW_BASE(i));
	111	}
	112
	113	for (i = 0; i < dram->num_cs; i++) {
	114	const struct mbus_dram_window *cs = dram->cs + i;
	115
	116	/* Write size, attributes and target id to control register */
	117	writel(((cs->size - 1) & 0xffff0000) \|
	118	(cs->mbus_attr << 8) \|
	119	(dram->mbus_dram_target_id << 4) \| 1,
	120	regs + SDHCI_WINDOW_CTRL(i));
	121	/* Write base address to base register */
	122	writel(cs->base, regs + SDHCI_WINDOW_BASE(i));
	123	}
	124
	125	iounmap(regs);
	126
	127	return 0;
	128	}
	129
a39128bc MW	130	static int armada_38x_quirks(struct platform_device *pdev,
a39128bc MW	131	struct sdhci_host *host)
d4b803c5	132	{
a39128bc	133	struct device_node *np = pdev->dev.of_node;
1140011e	134	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
f599da40	135	struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
1140011e	136	struct resource *res;
a39128bc	137
5de76bfc	138	host->quirks &= ~SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN;
d4b803c5	139	host->quirks \|= SDHCI_QUIRK_MISSING_CAPS;
0ca33b4a RK	140
	141	host->caps = sdhci_readl(host, SDHCI_CAPABILITIES);
	142	host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
	143
1140011e MW	144	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
	145	"conf-sdio3");
	146	if (res) {
	147	pxa->sdio3_conf_reg = devm_ioremap_resource(&pdev->dev, res);
	148	if (IS_ERR(pxa->sdio3_conf_reg))
	149	return PTR_ERR(pxa->sdio3_conf_reg);
	150	} else {
	151	/*
	152	* According to erratum 'FE-2946959' both SDR50 and DDR50
	153	* modes require specific clock adjustments in SDIO3
	154	* Configuration register, if the adjustment is not done,
	155	* remove them from the capabilities.
	156	*/
1140011e MW	157	host->caps1 &= ~(SDHCI_SUPPORT_SDR50 \| SDHCI_SUPPORT_DDR50);
	158
	159	dev_warn(&pdev->dev, "conf-sdio3 register not found: disabling SDR50 and DDR50 modes.\nConsider updating your dtb\n");
	160	}
a39128bc MW	161
	162	/*
	163	* According to erratum 'ERR-7878951' Armada 38x SDHCI
	164	* controller has different capabilities than the ones shown
	165	* in its registers
	166	*/
a39128bc MW	167	if (of_property_read_bool(np, "no-1-8-v")) {
	168	host->caps &= ~SDHCI_CAN_VDD_180;
	169	host->mmc->caps &= ~MMC_CAP_1_8V_DDR;
	170	} else {
	171	host->caps &= ~SDHCI_CAN_VDD_330;
	172	}
	173	host->caps1 &= ~(SDHCI_SUPPORT_SDR104 \| SDHCI_USE_SDR50_TUNING);
	174
d4b803c5 GC	175	return 0;
	176	}
	177
03231f9b	178	static void pxav3_reset(struct sdhci_host *host, u8 mask)
a702c8ab ZG	179	{
	180	struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
	181	struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
	182
03231f9b RK	183	sdhci_reset(host, mask);
03231f9b RK	184
a702c8ab ZG	185	if (mask == SDHCI_RESET_ALL) {
	186	/*
	187	* tune timing of read data/command when crc error happen
	188	* no performance impact
	189	*/
	190	if (pdata && 0 != pdata->clk_delay_cycles) {
	191	u16 tmp;
	192
	193	tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
	194	tmp \|= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK)
	195	<< SDCLK_DELAY_SHIFT;
	196	tmp \|= SDCLK_SEL;
	197	writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
	198	}
	199	}
	200	}
	201
	202	#define MAX_WAIT_COUNT 5
	203	static void pxav3_gen_init_74_clocks(struct sdhci_host *host, u8 power_mode)
	204	{
	205	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
f599da40	206	struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
a702c8ab ZG	207	u16 tmp;
	208	int count;
	209
	210	if (pxa->power_mode == MMC_POWER_UP
	211	&& power_mode == MMC_POWER_ON) {
	212
	213	dev_dbg(mmc_dev(host->mmc),
	214	"%s: slot->power_mode = %d,"
	215	"ios->power_mode = %d\n",
	216	__func__,
	217	pxa->power_mode,
	218	power_mode);
	219
	220	/* set we want notice of when 74 clocks are sent */
	221	tmp = readw(host->ioaddr + SD_CE_ATA_2);
	222	tmp \|= SDCE_MISC_INT_EN;
	223	writew(tmp, host->ioaddr + SD_CE_ATA_2);
	224
	225	/* start sending the 74 clocks */
	226	tmp = readw(host->ioaddr + SD_CFG_FIFO_PARAM);
	227	tmp \|= SDCFG_GEN_PAD_CLK_ON;
	228	writew(tmp, host->ioaddr + SD_CFG_FIFO_PARAM);
	229
	230	/* slowest speed is about 100KHz or 10usec per clock */
	231	udelay(740);
	232	count = 0;
	233
	234	while (count++ < MAX_WAIT_COUNT) {
	235	if ((readw(host->ioaddr + SD_CE_ATA_2)
	236	& SDCE_MISC_INT) == 0)
	237	break;
	238	udelay(10);
	239	}
	240
	241	if (count == MAX_WAIT_COUNT)
	242	dev_warn(mmc_dev(host->mmc), "74 clock interrupt not cleared\n");
	243
	244	/* clear the interrupt bit if posted */
	245	tmp = readw(host->ioaddr + SD_CE_ATA_2);
	246	tmp \|= SDCE_MISC_INT;
	247	writew(tmp, host->ioaddr + SD_CE_ATA_2);
	248	}
	249	pxa->power_mode = power_mode;
	250	}
	251
13e64501	252	static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
a702c8ab	253	{
1140011e	254	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
f599da40	255	struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
a702c8ab ZG	256	u16 ctrl_2;
	257
	258	/*
	259	* Set V18_EN -- UHS modes do not work without this.
	260	* does not change signaling voltage
	261	*/
	262	ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
	263
	264	/* Select Bus Speed Mode for host */
	265	ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
	266	switch (uhs) {
	267	case MMC_TIMING_UHS_SDR12:
	268	ctrl_2 \|= SDHCI_CTRL_UHS_SDR12;
	269	break;
	270	case MMC_TIMING_UHS_SDR25:
	271	ctrl_2 \|= SDHCI_CTRL_UHS_SDR25;
	272	break;
	273	case MMC_TIMING_UHS_SDR50:
	274	ctrl_2 \|= SDHCI_CTRL_UHS_SDR50 \| SDHCI_CTRL_VDD_180;
	275	break;
	276	case MMC_TIMING_UHS_SDR104:
	277	ctrl_2 \|= SDHCI_CTRL_UHS_SDR104 \| SDHCI_CTRL_VDD_180;
	278	break;
668e84b2	279	case MMC_TIMING_MMC_DDR52:
a702c8ab ZG	280	case MMC_TIMING_UHS_DDR50:
	281	ctrl_2 \|= SDHCI_CTRL_UHS_DDR50 \| SDHCI_CTRL_VDD_180;
	282	break;
	283	}
	284
1140011e MW	285	/*
	286	* Update SDIO3 Configuration register according to erratum
	287	* FE-2946959
	288	*/
	289	if (pxa->sdio3_conf_reg) {
	290	u8 reg_val = readb(pxa->sdio3_conf_reg);
	291
	292	if (uhs == MMC_TIMING_UHS_SDR50 \|\|
	293	uhs == MMC_TIMING_UHS_DDR50) {
	294	reg_val &= ~SDIO3_CONF_CLK_INV;
	295	reg_val \|= SDIO3_CONF_SD_FB_CLK;
fa796414 NH	296	} else if (uhs == MMC_TIMING_MMC_HS) {
	297	reg_val &= ~SDIO3_CONF_CLK_INV;
	298	reg_val &= ~SDIO3_CONF_SD_FB_CLK;
1140011e MW	299	} else {
	300	reg_val \|= SDIO3_CONF_CLK_INV;
	301	reg_val &= ~SDIO3_CONF_SD_FB_CLK;
	302	}
	303	writeb(reg_val, pxa->sdio3_conf_reg);
	304	}
	305
a702c8ab ZG	306	sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
	307	dev_dbg(mmc_dev(host->mmc),
	308	"%s uhs = %d, ctrl_2 = %04X\n",
	309	__func__, uhs, ctrl_2);
a702c8ab ZG	310	}
a702c8ab ZG	311
c915568d	312	static const struct sdhci_ops pxav3_sdhci_ops = {
1771059c	313	.set_clock = sdhci_set_clock,
a702c8ab	314	.platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
d005d943	315	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
2317f56c	316	.set_bus_width = sdhci_set_bus_width,
03231f9b	317	.reset = pxav3_reset,
b3153765	318	.set_uhs_signaling = pxav3_set_uhs_signaling,
a702c8ab ZG	319	};
a702c8ab ZG	320
73b7afb9	321	static struct sdhci_pltfm_data sdhci_pxav3_pdata = {
e065162a	322	.quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
73b7afb9 KL	323	\| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
	324	\| SDHCI_QUIRK_32BIT_ADMA_SIZE
	325	\| SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
	326	.ops = &pxav3_sdhci_ops,
	327	};
	328
b650352d CB	329	#ifdef CONFIG_OF
	330	static const struct of_device_id sdhci_pxav3_of_match[] = {
	331	{
	332	.compatible = "mrvl,pxav3-mmc",
	333	},
5491ce3f MW	334	{
	335	.compatible = "marvell,armada-380-sdhci",
	336	},
b650352d CB	337	{},
	338	};
	339	MODULE_DEVICE_TABLE(of, sdhci_pxav3_of_match);
	340
	341	static struct sdhci_pxa_platdata pxav3_get_mmc_pdata(struct device dev)
	342	{
	343	struct sdhci_pxa_platdata *pdata;
	344	struct device_node *np = dev->of_node;
b650352d CB	345	u32 clk_delay_cycles;
	346
	347	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
	348	if (!pdata)
	349	return NULL;
	350
14460dba JZ	351	if (!of_property_read_u32(np, "mrvl,clk-delay-cycles",
14460dba JZ	352	&clk_delay_cycles))
b650352d CB	353	pdata->clk_delay_cycles = clk_delay_cycles;
	354
	355	return pdata;
	356	}
	357	#else
	358	static inline struct sdhci_pxa_platdata pxav3_get_mmc_pdata(struct device dev)
	359	{
	360	return NULL;
	361	}
	362	#endif
	363
c3be1efd	364	static int sdhci_pxav3_probe(struct platform_device *pdev)
a702c8ab ZG	365	{
	366	struct sdhci_pltfm_host *pltfm_host;
	367	struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
	368	struct device *dev = &pdev->dev;
5491ce3f	369	struct device_node *np = pdev->dev.of_node;
a702c8ab ZG	370	struct sdhci_host *host = NULL;
a702c8ab ZG	371	struct sdhci_pxa *pxa = NULL;
b650352d	372	const struct of_device_id *match;
a702c8ab	373	int ret;
a702c8ab	374
f599da40	375	host = sdhci_pltfm_init(pdev, &sdhci_pxav3_pdata, sizeof(*pxa));
3df5b281	376	if (IS_ERR(host))
a702c8ab	377	return PTR_ERR(host);
5491ce3f	378
a702c8ab	379	pltfm_host = sdhci_priv(host);
f599da40	380	pxa = sdhci_pltfm_priv(pltfm_host);
a702c8ab	381
01ae1070 SH	382	pxa->clk_io = devm_clk_get(dev, "io");
	383	if (IS_ERR(pxa->clk_io))
	384	pxa->clk_io = devm_clk_get(dev, NULL);
8c96a7a3	385	if (IS_ERR(pxa->clk_io)) {
a702c8ab	386	dev_err(dev, "failed to get io clock\n");
8c96a7a3	387	ret = PTR_ERR(pxa->clk_io);
a702c8ab ZG	388	goto err_clk_get;
a702c8ab ZG	389	}
8c96a7a3 SH	390	pltfm_host->clk = pxa->clk_io;
8c96a7a3 SH	391	clk_prepare_enable(pxa->clk_io);
a702c8ab	392
8afdc9cc SH	393	pxa->clk_core = devm_clk_get(dev, "core");
	394	if (!IS_ERR(pxa->clk_core))
	395	clk_prepare_enable(pxa->clk_core);
	396
a39128bc MW	397	/* enable 1/8V DDR capable */
	398	host->mmc->caps \|= MMC_CAP_1_8V_DDR;
	399
aa8165f9	400	if (of_device_is_compatible(np, "marvell,armada-380-sdhci")) {
a39128bc	401	ret = armada_38x_quirks(pdev, host);
d4b803c5	402	if (ret < 0)
2162d9f4	403	goto err_mbus_win;
aa8165f9 TP	404	ret = mv_conf_mbus_windows(pdev, mv_mbus_dram_info());
	405	if (ret < 0)
	406	goto err_mbus_win;
	407	}
	408
b650352d	409	match = of_match_device(of_match_ptr(sdhci_pxav3_of_match), &pdev->dev);
943647f6	410	if (match) {
d2cf6071 SB	411	ret = mmc_of_parse(host->mmc);
	412	if (ret)
	413	goto err_of_parse;
943647f6	414	sdhci_get_of_property(pdev);
b650352d	415	pdata = pxav3_get_mmc_pdata(dev);
9cd76049	416	pdev->dev.platform_data = pdata;
943647f6	417	} else if (pdata) {
c844a46f KL	418	/* on-chip device */
c844a46f KL	419	if (pdata->flags & PXA_FLAG_CARD_PERMANENT)
a702c8ab	420	host->mmc->caps \|= MMC_CAP_NONREMOVABLE;
a702c8ab ZG	421
	422	/* If slot design supports 8 bit data, indicate this to MMC. */
	423	if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
	424	host->mmc->caps \|= MMC_CAP_8_BIT_DATA;
	425
	426	if (pdata->quirks)
	427	host->quirks \|= pdata->quirks;
7c52d7bb KL	428	if (pdata->quirks2)
7c52d7bb KL	429	host->quirks2 \|= pdata->quirks2;
a702c8ab ZG	430	if (pdata->host_caps)
a702c8ab ZG	431	host->mmc->caps \|= pdata->host_caps;
8f63795c CB	432	if (pdata->host_caps2)
8f63795c CB	433	host->mmc->caps2 \|= pdata->host_caps2;
a702c8ab ZG	434	if (pdata->pm_caps)
a702c8ab ZG	435	host->mmc->pm_caps \|= pdata->pm_caps;
8f63795c CB	436
8f63795c CB	437	if (gpio_is_valid(pdata->ext_cd_gpio)) {
214fc309 LP	438	ret = mmc_gpio_request_cd(host->mmc, pdata->ext_cd_gpio,
214fc309 LP	439	0);
8f63795c CB	440	if (ret) {
	441	dev_err(mmc_dev(host->mmc),
	442	"failed to allocate card detect gpio\n");
	443	goto err_cd_req;
	444	}
	445	}
a702c8ab ZG	446	}
a702c8ab ZG	447
62cf983a JZ	448	pm_runtime_get_noresume(&pdev->dev);
62cf983a JZ	449	pm_runtime_set_active(&pdev->dev);
bb691ae4 KL	450	pm_runtime_set_autosuspend_delay(&pdev->dev, PXAV3_RPM_DELAY_MS);
bb691ae4 KL	451	pm_runtime_use_autosuspend(&pdev->dev);
62cf983a	452	pm_runtime_enable(&pdev->dev);
bb691ae4	453	pm_suspend_ignore_children(&pdev->dev, 1);
bb691ae4	454
a702c8ab ZG	455	ret = sdhci_add_host(host);
	456	if (ret) {
	457	dev_err(&pdev->dev, "failed to add host\n");
	458	goto err_add_host;
	459	}
	460
	461	platform_set_drvdata(pdev, host);
	462
83dc9fec	463	if (host->mmc->pm_caps & MMC_PM_WAKE_SDIO_IRQ)
740b7a44	464	device_init_wakeup(&pdev->dev, 1);
740b7a44	465
bb691ae4 KL	466	pm_runtime_put_autosuspend(&pdev->dev);
bb691ae4 KL	467
a702c8ab ZG	468	return 0;
	469
	470	err_add_host:
0dcaa249	471	pm_runtime_disable(&pdev->dev);
62cf983a	472	pm_runtime_put_noidle(&pdev->dev);
87d2163d XW	473	err_of_parse:
87d2163d XW	474	err_cd_req:
aa8165f9	475	err_mbus_win:
8c96a7a3	476	clk_disable_unprepare(pxa->clk_io);
c25d9e1b	477	clk_disable_unprepare(pxa->clk_core);
a702c8ab ZG	478	err_clk_get:
a702c8ab ZG	479	sdhci_pltfm_free(pdev);
a702c8ab ZG	480	return ret;
	481	}
	482
6e0ee714	483	static int sdhci_pxav3_remove(struct platform_device *pdev)
a702c8ab ZG	484	{
	485	struct sdhci_host *host = platform_get_drvdata(pdev);
	486	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
f599da40	487	struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
a702c8ab	488
bb691ae4	489	pm_runtime_get_sync(&pdev->dev);
bb691ae4	490	pm_runtime_disable(&pdev->dev);
20f1f2d7 JZ	491	pm_runtime_put_noidle(&pdev->dev);
	492
	493	sdhci_remove_host(host, 1);
a702c8ab	494
8c96a7a3	495	clk_disable_unprepare(pxa->clk_io);
c25d9e1b	496	clk_disable_unprepare(pxa->clk_core);
8f63795c	497
a702c8ab	498	sdhci_pltfm_free(pdev);
a702c8ab	499
a702c8ab ZG	500	return 0;
	501	}
	502
bb691ae4 KL	503	#ifdef CONFIG_PM_SLEEP
	504	static int sdhci_pxav3_suspend(struct device *dev)
	505	{
	506	int ret;
	507	struct sdhci_host *host = dev_get_drvdata(dev);
	508
	509	pm_runtime_get_sync(dev);
	510	ret = sdhci_suspend_host(host);
	511	pm_runtime_mark_last_busy(dev);
	512	pm_runtime_put_autosuspend(dev);
	513
	514	return ret;
	515	}
	516
	517	static int sdhci_pxav3_resume(struct device *dev)
	518	{
	519	int ret;
	520	struct sdhci_host *host = dev_get_drvdata(dev);
	521
	522	pm_runtime_get_sync(dev);
	523	ret = sdhci_resume_host(host);
	524	pm_runtime_mark_last_busy(dev);
	525	pm_runtime_put_autosuspend(dev);
	526
	527	return ret;
	528	}
	529	#endif
	530
162d6f98	531	#ifdef CONFIG_PM
bb691ae4 KL	532	static int sdhci_pxav3_runtime_suspend(struct device *dev)
	533	{
	534	struct sdhci_host *host = dev_get_drvdata(dev);
	535	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
f599da40	536	struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
3bb10f60	537	int ret;
bb691ae4	538
3bb10f60 JZ	539	ret = sdhci_runtime_suspend_host(host);
	540	if (ret)
	541	return ret;
bb691ae4	542
8c96a7a3	543	clk_disable_unprepare(pxa->clk_io);
8afdc9cc SH	544	if (!IS_ERR(pxa->clk_core))
8afdc9cc SH	545	clk_disable_unprepare(pxa->clk_core);
bb691ae4 KL	546
	547	return 0;
	548	}
	549
	550	static int sdhci_pxav3_runtime_resume(struct device *dev)
	551	{
	552	struct sdhci_host *host = dev_get_drvdata(dev);
	553	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
f599da40	554	struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
bb691ae4	555
8c96a7a3	556	clk_prepare_enable(pxa->clk_io);
8afdc9cc SH	557	if (!IS_ERR(pxa->clk_core))
8afdc9cc SH	558	clk_prepare_enable(pxa->clk_core);
bb691ae4	559
3bb10f60	560	return sdhci_runtime_resume_host(host);
bb691ae4 KL	561	}
	562	#endif
	563
	564	#ifdef CONFIG_PM
	565	static const struct dev_pm_ops sdhci_pxav3_pmops = {
	566	SET_SYSTEM_SLEEP_PM_OPS(sdhci_pxav3_suspend, sdhci_pxav3_resume)
	567	SET_RUNTIME_PM_OPS(sdhci_pxav3_runtime_suspend,
	568	sdhci_pxav3_runtime_resume, NULL)
	569	};
	570
	571	#define SDHCI_PXAV3_PMOPS (&sdhci_pxav3_pmops)
	572
	573	#else
	574	#define SDHCI_PXAV3_PMOPS NULL
	575	#endif
	576
a702c8ab ZG	577	static struct platform_driver sdhci_pxav3_driver = {
	578	.driver = {
	579	.name = "sdhci-pxav3",
59d22309	580	.of_match_table = of_match_ptr(sdhci_pxav3_of_match),
bb691ae4	581	.pm = SDHCI_PXAV3_PMOPS,
a702c8ab ZG	582	},
a702c8ab ZG	583	.probe = sdhci_pxav3_probe,
0433c143	584	.remove = sdhci_pxav3_remove,
a702c8ab	585	};
a702c8ab	586
d1f81a64	587	module_platform_driver(sdhci_pxav3_driver);
a702c8ab ZG	588
	589	MODULE_DESCRIPTION("SDHCI driver for pxav3");
	590	MODULE_AUTHOR("Marvell International Ltd.");
	591	MODULE_LICENSE("GPL v2");
	592