[linux-block.git] / drivers / input / touchscreen / Kconfig

#
# Touchscreen driver configuration
#
menuconfig INPUT_TOUCHSCREEN
	bool "Touchscreens"
	help
	  Say Y here, and a list of supported touchscreens will be displayed.
	  This option doesn't affect the kernel.

	  If unsure, say Y.

if INPUT_TOUCHSCREEN

config TOUCHSCREEN_ADS7846
	tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
	depends on SPI_MASTER
	depends on HWMON = n || HWMON
	help
	  Say Y here if you have a touchscreen interface using the
	  ADS7846/TSC2046 or ADS7843 controller, and your board-specific
	  setup code includes that in its table of SPI devices.

	  If HWMON is selected, and the driver is told the reference voltage
	  on your board, you will also get hwmon interfaces for the voltage
	  (and on ads7846/tsc2046, temperature) sensors of this chip.

	  If unsure, say N (but it's safe to say "Y").

	  To compile this driver as a module, choose M here: the
	  module will be called ads7846.

config TOUCHSCREEN_AD7877
	tristate "AD7877 based touchscreens"
	depends on SPI_MASTER
	help
	  Say Y here if you have a touchscreen interface using the
	  AD7877 controller, and your board-specific initialization
	  code includes that in its table of SPI devices.

	  If unsure, say N (but it's safe to say "Y").

	  To compile this driver as a module, choose M here: the
	  module will be called ad7877.

config TOUCHSCREEN_AD7879_I2C
	tristate "AD7879 based touchscreens: AD7879-1 I2C Interface"
	depends on I2C
	select TOUCHSCREEN_AD7879
	help
	  Say Y here if you have a touchscreen interface using the
	  AD7879-1/AD7889-1 controller, and your board-specific
	  initialization code includes that in its table of I2C devices.

	  If unsure, say N (but it's safe to say "Y").

	  To compile this driver as a module, choose M here: the
	  module will be called ad7879.

config TOUCHSCREEN_AD7879_SPI
	tristate "AD7879 based touchscreens: AD7879 SPI Interface"
	depends on SPI_MASTER && TOUCHSCREEN_AD7879_I2C = n
	select TOUCHSCREEN_AD7879
	help
	  Say Y here if you have a touchscreen interface using the
	  AD7879/AD7889 controller, and your board-specific initialization
	  code includes that in its table of SPI devices.

	  If unsure, say N (but it's safe to say "Y").

	  To compile this driver as a module, choose M here: the
	  module will be called ad7879.

config TOUCHSCREEN_AD7879
	tristate
	default n

config TOUCHSCREEN_BITSY
	tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
	depends on SA1100_BITSY
	select SERIO
	help
	  Say Y here if you have the h3600 (Bitsy) touchscreen.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called h3600_ts_input.

config TOUCHSCREEN_CORGI
	tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"
	depends on PXA_SHARPSL
	select CORGI_SSP_DEPRECATED
	default y
	help
	  Say Y here to enable the driver for the touchscreen on the
	  Sharp SL-C7xx and SL-Cxx00 series of PDAs.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called corgi_ts.

	  NOTE: this driver is deprecated, try enable SPI and generic
	  ADS7846-based touchscreen driver.

config TOUCHSCREEN_DA9034
	tristate "Touchscreen support for Dialog Semiconductor DA9034"
	depends on PMIC_DA903X
	default y
	help
	  Say Y here to enable the support for the touchscreen found
	  on Dialog Semiconductor DA9034 PMIC.

config TOUCHSCREEN_EETI
	tristate "EETI touchscreen panel support"
	depends on I2C
	help
	  Say Y here to enable support for I2C connected EETI touch panels.

	  To compile this driver as a module, choose M here: the
	  module will be called eeti_ts.

config TOUCHSCREEN_FUJITSU
	tristate "Fujitsu serial touchscreen"
	select SERIO
	help
	  Say Y here if you have the Fujitsu touchscreen (such as one
	  installed in Lifebook P series laptop) connected to your
	  system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called fujitsu-ts.

config TOUCHSCREEN_GUNZE
	tristate "Gunze AHL-51S touchscreen"
	select SERIO
	help
	  Say Y here if you have the Gunze AHL-51 touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called gunze.

config TOUCHSCREEN_ELO
	tristate "Elo serial touchscreens"
	select SERIO
	help
	  Say Y here if you have an Elo serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called elo.

config TOUCHSCREEN_WACOM_W8001
	tristate "Wacom W8001 penabled serial touchscreen"
	select SERIO
	help
	  Say Y here if you have an Wacom W8001 penabled serial touchscreen
	  connected to your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called wacom_w8001.

config TOUCHSCREEN_MCS5000
	tristate "MELFAS MCS-5000 touchscreen"
	depends on I2C
	help
	  Say Y here if you have the MELFAS MCS-5000 touchscreen controller
	  chip in your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called mcs5000_ts.

config TOUCHSCREEN_MTOUCH
	tristate "MicroTouch serial touchscreens"
	select SERIO
	help
	  Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called mtouch.

config TOUCHSCREEN_INEXIO
	tristate "iNexio serial touchscreens"
	select SERIO
	help
	  Say Y here if you have an iNexio serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called inexio.

config TOUCHSCREEN_MK712
	tristate "ICS MicroClock MK712 touchscreen"
	help
	  Say Y here if you have the ICS MicroClock MK712 touchscreen
	  controller chip in your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called mk712.

config TOUCHSCREEN_HP600
	tristate "HP Jornada 6xx touchscreen"
	depends on SH_HP6XX && SH_ADC
	help
	  Say Y here if you have a HP Jornada 620/660/680/690 and want to
          support the built-in touchscreen.

	  To compile this driver as a module, choose M here: the
	  module will be called hp680_ts_input.

config TOUCHSCREEN_HP7XX
	tristate "HP Jornada 7xx touchscreen"
	depends on SA1100_JORNADA720_SSP
	help
	  Say Y here if you have a HP Jornada 710/720/728 and want
	  to support the built-in touchscreen.

	  To compile this driver as a module, choose M here: the
	  module will be called jornada720_ts.

config TOUCHSCREEN_HTCPEN
	tristate "HTC Shift X9500 touchscreen"
	depends on ISA
	help
	  Say Y here if you have an HTC Shift UMPC also known as HTC X9500
	  Clio / Shangrila and want to support the built-in touchscreen.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called htcpen.

config TOUCHSCREEN_PENMOUNT
	tristate "Penmount serial touchscreen"
	select SERIO
	help
	  Say Y here if you have a Penmount serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called penmount.

config TOUCHSCREEN_MIGOR
	tristate "Renesas MIGO-R touchscreen"
	depends on SH_MIGOR && I2C
	help
	  Say Y here to enable MIGO-R touchscreen support.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called migor_ts.

config TOUCHSCREEN_TOUCHRIGHT
	tristate "Touchright serial touchscreen"
	select SERIO
	help
	  Say Y here if you have a Touchright serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called touchright.

config TOUCHSCREEN_TOUCHWIN
	tristate "Touchwin serial touchscreen"
	select SERIO
	help
	  Say Y here if you have a Touchwin serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called touchwin.

config TOUCHSCREEN_ATMEL_TSADCC
	tristate "Atmel Touchscreen Interface"
	depends on ARCH_AT91SAM9RL
	help
	  Say Y here if you have a 4-wire touchscreen connected to the
          ADC Controller on your Atmel SoC (such as the AT91SAM9RL).

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called atmel_tsadcc.

config TOUCHSCREEN_UCB1400
	tristate "Philips UCB1400 touchscreen"
	depends on AC97_BUS
	depends on UCB1400_CORE
	help
	  This enables support for the Philips UCB1400 touchscreen interface.
	  The UCB1400 is an AC97 audio codec.  The touchscreen interface
	  will be initialized only after the ALSA subsystem has been
	  brought up and the UCB1400 detected.  You therefore have to
	  configure ALSA support as well (either built-in or modular,
	  independently of whether this driver is itself built-in or
	  modular) for this driver to work.

	  To compile this driver as a module, choose M here: the
	  module will be called ucb1400_ts.

config TOUCHSCREEN_WM97XX
	tristate "Support for WM97xx AC97 touchscreen controllers"
	depends on AC97_BUS
	help
	  Say Y here if you have a Wolfson Microelectronics WM97xx
	  touchscreen connected to your system. Note that this option
	  only enables core driver, you will also need to select
	  support for appropriate chip below.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called wm97xx-ts.

config TOUCHSCREEN_WM9705
	bool "WM9705 Touchscreen interface support"
	depends on TOUCHSCREEN_WM97XX
	default y
	help
	  Say Y here to enable support for the Wolfson Microelectronics
	  WM9705 touchscreen controller.

config TOUCHSCREEN_WM9712
	bool "WM9712 Touchscreen interface support"
	depends on TOUCHSCREEN_WM97XX
	default y
	help
	  Say Y here to enable support for the Wolfson Microelectronics
	  WM9712 touchscreen controller.

config TOUCHSCREEN_WM9713
	bool "WM9713 Touchscreen interface support"
	depends on TOUCHSCREEN_WM97XX
	default y
	help
	  Say Y here to enable support for the Wolfson Microelectronics
	  WM9713 touchscreen controller.

config TOUCHSCREEN_WM97XX_ATMEL
	tristate "WM97xx Atmel accelerated touch"
	depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91)
	help
	  Say Y here for support for streaming mode with WM97xx touchscreens
	  on Atmel AT91 or AVR32 systems with an AC97C module.

	  Be aware that this will use channel B in the controller for
	  streaming data, this must not conflict with other AC97C drivers.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the module will
	  be called atmel-wm97xx.

config TOUCHSCREEN_WM97XX_MAINSTONE
	tristate "WM97xx Mainstone/Palm accelerated touch"
	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
	help
	  Say Y here for support for streaming mode with WM97xx touchscreens
	  on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called mainstone-wm97xx.

config TOUCHSCREEN_WM97XX_ZYLONITE
	tristate "Zylonite accelerated touch"
	depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
	select TOUCHSCREEN_WM9713
	help
	  Say Y here for support for streaming mode with the touchscreen
	  on Zylonite systems.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called zylonite-wm97xx.

config TOUCHSCREEN_USB_COMPOSITE
	tristate "USB Touchscreen Driver"
	depends on USB_ARCH_HAS_HCD
	select USB
	help
	  USB Touchscreen driver for:
	  - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
	  - PanJit TouchSet USB
	  - 3M MicroTouch USB (EX II series)
	  - ITM
	  - some other eTurboTouch
	  - Gunze AHL61
	  - DMC TSC-10/25
	  - IRTOUCHSYSTEMS/UNITOP
	  - IdealTEK URTC1000
	  - GoTop Super_Q2/GogoPen/PenPower tablets
	  - JASTEC USB Touch Controller/DigiTech DTR-02U

	  Have a look at <http://linux.chapter7.ch/touchkit/> for
	  a usage description and the required user-space stuff.

	  To compile this driver as a module, choose M here: the
	  module will be called usbtouchscreen.

config TOUCHSCREEN_USB_EGALAX
	default y
	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_PANJIT
	default y
	bool "PanJit device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_3M
	default y
	bool "3M/Microtouch EX II series device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_ITM
	default y
	bool "ITM device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_ETURBO
	default y
	bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_GUNZE
	default y
	bool "Gunze AHL61 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_DMC_TSC10
	default y
	bool "DMC TSC-10/25 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_IRTOUCH
	default y
	bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_IDEALTEK
	default y
	bool "IdealTEK URTC1000 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_GENERAL_TOUCH
	default y
	bool "GeneralTouch Touchscreen device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_GOTOP
	default y
	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_JASTEC
	default y
	bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_E2I
	default y
	bool "e2i Touchscreen controller (e.g. from Mimo 740)"
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_TOUCHIT213
	tristate "Sahara TouchIT-213 touchscreen"
	select SERIO
	help
	  Say Y here if you have a Sahara TouchIT-213 Tablet PC.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called touchit213.

config TOUCHSCREEN_TSC2007
	tristate "TSC2007 based touchscreens"
	depends on I2C
	help
	  Say Y here if you have a TSC2007 based touchscreen.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called tsc2007.

config TOUCHSCREEN_W90X900
	tristate "W90P910 touchscreen driver"
	depends on HAVE_CLK
	help
	  Say Y here if you have a W90P910 based touchscreen.

	  To compile this driver as a module, choose M here: the
	  module will be called w90p910_ts.

config TOUCHSCREEN_PCAP
	tristate "Motorola PCAP touchscreen"
	depends on EZX_PCAP
	help
	  Say Y here if you have a Motorola EZX telephone and
	  want to enable support for the built-in touchscreen.

	  To compile this driver as a module, choose M here: the
	  module will be called pcap_ts.
endif
Commit	Line	Data
1da177e4	1	#
d05e84e6	2	# Touchscreen driver configuration
1da177e4 LT	3	#
	4	menuconfig INPUT_TOUCHSCREEN
	5	bool "Touchscreens"
	6	help
	7	Say Y here, and a list of supported touchscreens will be displayed.
	8	This option doesn't affect the kernel.
	9
	10	If unsure, say Y.
	11
	12	if INPUT_TOUCHSCREEN
	13
ffa458c1	14	config TOUCHSCREEN_ADS7846
bff0de5f	15	tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
ffa458c1	16	depends on SPI_MASTER
2c8dc071	17	depends on HWMON = n \|\| HWMON
ffa458c1 DB	18	help
ffa458c1 DB	19	Say Y here if you have a touchscreen interface using the
bff0de5f DB	20	ADS7846/TSC2046 or ADS7843 controller, and your board-specific
bff0de5f DB	21	setup code includes that in its table of SPI devices.
ffa458c1	22
2c8dc071 DB	23	If HWMON is selected, and the driver is told the reference voltage
2c8dc071 DB	24	on your board, you will also get hwmon interfaces for the voltage
bff0de5f	25	(and on ads7846/tsc2046, temperature) sensors of this chip.
2c8dc071	26
ffa458c1 DB	27	If unsure, say N (but it's safe to say "Y").
	28
	29	To compile this driver as a module, choose M here: the
	30	module will be called ads7846.
	31
331b78ed MH	32	config TOUCHSCREEN_AD7877
	33	tristate "AD7877 based touchscreens"
	34	depends on SPI_MASTER
	35	help
	36	Say Y here if you have a touchscreen interface using the
	37	AD7877 controller, and your board-specific initialization
	38	code includes that in its table of SPI devices.
	39
	40	If unsure, say N (but it's safe to say "Y").
	41
	42	To compile this driver as a module, choose M here: the
	43	module will be called ad7877.
	44
b4be468c MH	45	config TOUCHSCREEN_AD7879_I2C
	46	tristate "AD7879 based touchscreens: AD7879-1 I2C Interface"
	47	depends on I2C
	48	select TOUCHSCREEN_AD7879
	49	help
	50	Say Y here if you have a touchscreen interface using the
36fb2527 MH	51	AD7879-1/AD7889-1 controller, and your board-specific
36fb2527 MH	52	initialization code includes that in its table of I2C devices.
b4be468c MH	53
	54	If unsure, say N (but it's safe to say "Y").
	55
	56	To compile this driver as a module, choose M here: the
	57	module will be called ad7879.
	58
	59	config TOUCHSCREEN_AD7879_SPI
	60	tristate "AD7879 based touchscreens: AD7879 SPI Interface"
	61	depends on SPI_MASTER && TOUCHSCREEN_AD7879_I2C = n
	62	select TOUCHSCREEN_AD7879
	63	help
	64	Say Y here if you have a touchscreen interface using the
36fb2527	65	AD7879/AD7889 controller, and your board-specific initialization
b4be468c MH	66	code includes that in its table of SPI devices.
	67
	68	If unsure, say N (but it's safe to say "Y").
	69
	70	To compile this driver as a module, choose M here: the
	71	module will be called ad7879.
	72
	73	config TOUCHSCREEN_AD7879
	74	tristate
	75	default n
	76
1da177e4 LT	77	config TOUCHSCREEN_BITSY
	78	tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
	79	depends on SA1100_BITSY
	80	select SERIO
	81	help
	82	Say Y here if you have the h3600 (Bitsy) touchscreen.
	83
	84	If unsure, say N.
	85
	86	To compile this driver as a module, choose M here: the
	87	module will be called h3600_ts_input.
	88
	89	config TOUCHSCREEN_CORGI
45e2a9b4	90	tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"
1da177e4	91	depends on PXA_SHARPSL
45e2a9b4	92	select CORGI_SSP_DEPRECATED
d05e84e6	93	default y
1da177e4	94	help
d05e84e6	95	Say Y here to enable the driver for the touchscreen on the
513b6e1a	96	Sharp SL-C7xx and SL-Cxx00 series of PDAs.
1da177e4 LT	97
	98	If unsure, say N.
	99
	100	To compile this driver as a module, choose M here: the
513b6e1a	101	module will be called corgi_ts.
1da177e4	102
45e2a9b4 EM	103	NOTE: this driver is deprecated, try enable SPI and generic
	104	ADS7846-based touchscreen driver.
	105
9bcc00b9 EM	106	config TOUCHSCREEN_DA9034
	107	tristate "Touchscreen support for Dialog Semiconductor DA9034"
	108	depends on PMIC_DA903X
	109	default y
	110	help
	111	Say Y here to enable the support for the touchscreen found
	112	on Dialog Semiconductor DA9034 PMIC.
	113
10494dce DM	114	config TOUCHSCREEN_EETI
	115	tristate "EETI touchscreen panel support"
	116	depends on I2C
	117	help
	118	Say Y here to enable support for I2C connected EETI touch panels.
	119
	120	To compile this driver as a module, choose M here: the
	121	module will be called eeti_ts.
	122
85f202d5 DT	123	config TOUCHSCREEN_FUJITSU
	124	tristate "Fujitsu serial touchscreen"
	125	select SERIO
	126	help
	127	Say Y here if you have the Fujitsu touchscreen (such as one
	128	installed in Lifebook P series laptop) connected to your
	129	system.
	130
	131	If unsure, say N.
	132
	133	To compile this driver as a module, choose M here: the
	134	module will be called fujitsu-ts.
	135
1da177e4 LT	136	config TOUCHSCREEN_GUNZE
	137	tristate "Gunze AHL-51S touchscreen"
	138	select SERIO
	139	help
	140	Say Y here if you have the Gunze AHL-51 touchscreen connected to
	141	your system.
	142
	143	If unsure, say N.
	144
	145	To compile this driver as a module, choose M here: the
	146	module will be called gunze.
	147
	148	config TOUCHSCREEN_ELO
	149	tristate "Elo serial touchscreens"
	150	select SERIO
	151	help
	152	Say Y here if you have an Elo serial touchscreen connected to
	153	your system.
	154
	155	If unsure, say N.
	156
	157	To compile this driver as a module, choose M here: the
153ab429	158	module will be called elo.
1da177e4	159
3eb1aa43 JK	160	config TOUCHSCREEN_WACOM_W8001
	161	tristate "Wacom W8001 penabled serial touchscreen"
	162	select SERIO
	163	help
	164	Say Y here if you have an Wacom W8001 penabled serial touchscreen
	165	connected to your system.
	166
	167	If unsure, say N.
	168
	169	To compile this driver as a module, choose M here: the
	170	module will be called wacom_w8001.
	171
38e783b3 JS	172	config TOUCHSCREEN_MCS5000
	173	tristate "MELFAS MCS-5000 touchscreen"
	174	depends on I2C
	175	help
	176	Say Y here if you have the MELFAS MCS-5000 touchscreen controller
	177	chip in your system.
	178
	179	If unsure, say N.
	180
	181	To compile this driver as a module, choose M here: the
	182	module will be called mcs5000_ts.
3eb1aa43	183
1da177e4 LT	184	config TOUCHSCREEN_MTOUCH
	185	tristate "MicroTouch serial touchscreens"
	186	select SERIO
	187	help
	188	Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
	189	your system.
	190
	191	If unsure, say N.
	192
	193	To compile this driver as a module, choose M here: the
	194	module will be called mtouch.
	195
3cadd2d9 RL	196	config TOUCHSCREEN_INEXIO
	197	tristate "iNexio serial touchscreens"
	198	select SERIO
	199	help
	200	Say Y here if you have an iNexio serial touchscreen connected to
	201	your system.
	202
	203	If unsure, say N.
	204
	205	To compile this driver as a module, choose M here: the
	206	module will be called inexio.
	207
1da177e4 LT	208	config TOUCHSCREEN_MK712
	209	tristate "ICS MicroClock MK712 touchscreen"
	210	help
	211	Say Y here if you have the ICS MicroClock MK712 touchscreen
	212	controller chip in your system.
	213
	214	If unsure, say N.
	215
	216	To compile this driver as a module, choose M here: the
	217	module will be called mk712.
	218
	219	config TOUCHSCREEN_HP600
4ff891eb	220	tristate "HP Jornada 6xx touchscreen"
0025835c	221	depends on SH_HP6XX && SH_ADC
1da177e4	222	help
4ff891eb	223	Say Y here if you have a HP Jornada 620/660/680/690 and want to
1da177e4 LT	224	support the built-in touchscreen.
1da177e4 LT	225
1da177e4 LT	226	To compile this driver as a module, choose M here: the
	227	module will be called hp680_ts_input.
	228
5637f02a	229	config TOUCHSCREEN_HP7XX
4ff891eb	230	tristate "HP Jornada 7xx touchscreen"
5637f02a KE	231	depends on SA1100_JORNADA720_SSP
	232	help
	233	Say Y here if you have a HP Jornada 710/720/728 and want
	234	to support the built-in touchscreen.
	235
	236	To compile this driver as a module, choose M here: the
	237	module will be called jornada720_ts.
	238
5a18c343 POF	239	config TOUCHSCREEN_HTCPEN
	240	tristate "HTC Shift X9500 touchscreen"
	241	depends on ISA
	242	help
	243	Say Y here if you have an HTC Shift UMPC also known as HTC X9500
	244	Clio / Shangrila and want to support the built-in touchscreen.
	245
	246	If unsure, say N.
	247
	248	To compile this driver as a module, choose M here: the
	249	module will be called htcpen.
	250
ee479999 RK	251	config TOUCHSCREEN_PENMOUNT
	252	tristate "Penmount serial touchscreen"
	253	select SERIO
	254	help
	255	Say Y here if you have a Penmount serial touchscreen connected to
	256	your system.
	257
	258	If unsure, say N.
	259
	260	To compile this driver as a module, choose M here: the
	261	module will be called penmount.
	262
885c316d MD	263	config TOUCHSCREEN_MIGOR
	264	tristate "Renesas MIGO-R touchscreen"
	265	depends on SH_MIGOR && I2C
	266	help
	267	Say Y here to enable MIGO-R touchscreen support.
	268
	269	If unsure, say N.
	270
	271	To compile this driver as a module, choose M here: the
	272	module will be called migor_ts.
	273
4003dff4 RK	274	config TOUCHSCREEN_TOUCHRIGHT
	275	tristate "Touchright serial touchscreen"
	276	select SERIO
	277	help
	278	Say Y here if you have a Touchright serial touchscreen connected to
	279	your system.
	280
	281	If unsure, say N.
	282
	283	To compile this driver as a module, choose M here: the
	284	module will be called touchright.
	285
11ea3173 RK	286	config TOUCHSCREEN_TOUCHWIN
	287	tristate "Touchwin serial touchscreen"
	288	select SERIO
	289	help
	290	Say Y here if you have a Touchwin serial touchscreen connected to
	291	your system.
	292
	293	If unsure, say N.
	294
	295	To compile this driver as a module, choose M here: the
	296	module will be called touchwin.
	297
72d18a7b DL	298	config TOUCHSCREEN_ATMEL_TSADCC
	299	tristate "Atmel Touchscreen Interface"
	300	depends on ARCH_AT91SAM9RL
	301	help
	302	Say Y here if you have a 4-wire touchscreen connected to the
	303	ADC Controller on your Atmel SoC (such as the AT91SAM9RL).
	304
	305	If unsure, say N.
	306
	307	To compile this driver as a module, choose M here: the
	308	module will be called atmel_tsadcc.
	309
f40219bf NP	310	config TOUCHSCREEN_UCB1400
f40219bf NP	311	tristate "Philips UCB1400 touchscreen"
64c12e9b	312	depends on AC97_BUS
d9105c2b	313	depends on UCB1400_CORE
f40219bf NP	314	help
	315	This enables support for the Philips UCB1400 touchscreen interface.
	316	The UCB1400 is an AC97 audio codec. The touchscreen interface
	317	will be initialized only after the ALSA subsystem has been
	318	brought up and the UCB1400 detected. You therefore have to
	319	configure ALSA support as well (either built-in or modular,
	320	independently of whether this driver is itself built-in or
	321	modular) for this driver to work.
	322
	323	To compile this driver as a module, choose M here: the
	324	module will be called ucb1400_ts.
	325
febf1dff MB	326	config TOUCHSCREEN_WM97XX
	327	tristate "Support for WM97xx AC97 touchscreen controllers"
	328	depends on AC97_BUS
	329	help
	330	Say Y here if you have a Wolfson Microelectronics WM97xx
	331	touchscreen connected to your system. Note that this option
	332	only enables core driver, you will also need to select
	333	support for appropriate chip below.
	334
	335	If unsure, say N.
	336
	337	To compile this driver as a module, choose M here: the
	338	module will be called wm97xx-ts.
	339
9448cefc MB	340	config TOUCHSCREEN_WM9705
	341	bool "WM9705 Touchscreen interface support"
	342	depends on TOUCHSCREEN_WM97XX
558a171d	343	default y
9448cefc	344	help
558a171d MB	345	Say Y here to enable support for the Wolfson Microelectronics
558a171d MB	346	WM9705 touchscreen controller.
9448cefc	347
de22b9ef MB	348	config TOUCHSCREEN_WM9712
	349	bool "WM9712 Touchscreen interface support"
	350	depends on TOUCHSCREEN_WM97XX
558a171d	351	default y
de22b9ef	352	help
558a171d MB	353	Say Y here to enable support for the Wolfson Microelectronics
558a171d MB	354	WM9712 touchscreen controller.
de22b9ef	355
dca98e91 MB	356	config TOUCHSCREEN_WM9713
	357	bool "WM9713 Touchscreen interface support"
	358	depends on TOUCHSCREEN_WM97XX
558a171d	359	default y
dca98e91	360	help
558a171d MB	361	Say Y here to enable support for the Wolfson Microelectronics
558a171d MB	362	WM9713 touchscreen controller.
dca98e91	363
864fe73c HCE	364	config TOUCHSCREEN_WM97XX_ATMEL
	365	tristate "WM97xx Atmel accelerated touch"
	366	depends on TOUCHSCREEN_WM97XX && (AVR32 \|\| ARCH_AT91)
	367	help
	368	Say Y here for support for streaming mode with WM97xx touchscreens
	369	on Atmel AT91 or AVR32 systems with an AC97C module.
	370
	371	Be aware that this will use channel B in the controller for
	372	streaming data, this must not conflict with other AC97C drivers.
	373
	374	If unsure, say N.
	375
	376	To compile this driver as a module, choose M here: the module will
	377	be called atmel-wm97xx.
	378
4db8a5f2	379	config TOUCHSCREEN_WM97XX_MAINSTONE
b833306f	380	tristate "WM97xx Mainstone/Palm accelerated touch"
4db8a5f2 MB	381	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
	382	help
	383	Say Y here for support for streaming mode with WM97xx touchscreens
b833306f	384	on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
4db8a5f2 MB	385
	386	If unsure, say N.
	387
	388	To compile this driver as a module, choose M here: the
	389	module will be called mainstone-wm97xx.
	390
22e39d34 MB	391	config TOUCHSCREEN_WM97XX_ZYLONITE
	392	tristate "Zylonite accelerated touch"
	393	depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
	394	select TOUCHSCREEN_WM9713
	395	help
	396	Say Y here for support for streaming mode with the touchscreen
	397	on Zylonite systems.
	398
	399	If unsure, say N.
	400
	401	To compile this driver as a module, choose M here: the
	402	module will be called zylonite-wm97xx.
	403
d05e84e6 DT	404	config TOUCHSCREEN_USB_COMPOSITE
d05e84e6 DT	405	tristate "USB Touchscreen Driver"
7a86edef	406	depends on USB_ARCH_HAS_HCD
d05e84e6 DT	407	select USB
	408	help
	409	USB Touchscreen driver for:
	410	- eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
	411	- PanJit TouchSet USB
	412	- 3M MicroTouch USB (EX II series)
	413	- ITM
	414	- some other eTurboTouch
	415	- Gunze AHL61
	416	- DMC TSC-10/25
df561fcd	417	- IRTOUCHSYSTEMS/UNITOP
a14a8401	418	- IdealTEK URTC1000
14e40206	419	- GoTop Super_Q2/GogoPen/PenPower tablets
f7370699	420	- JASTEC USB Touch Controller/DigiTech DTR-02U
d05e84e6 DT	421
	422	Have a look at <http://linux.chapter7.ch/touchkit/> for
	423	a usage description and the required user-space stuff.
	424
	425	To compile this driver as a module, choose M here: the
	426	module will be called usbtouchscreen.
	427
	428	config TOUCHSCREEN_USB_EGALAX
	429	default y
	430	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
	431	depends on TOUCHSCREEN_USB_COMPOSITE
	432
	433	config TOUCHSCREEN_USB_PANJIT
	434	default y
	435	bool "PanJit device support" if EMBEDDED
	436	depends on TOUCHSCREEN_USB_COMPOSITE
	437
	438	config TOUCHSCREEN_USB_3M
	439	default y
	440	bool "3M/Microtouch EX II series device support" if EMBEDDED
	441	depends on TOUCHSCREEN_USB_COMPOSITE
	442
	443	config TOUCHSCREEN_USB_ITM
	444	default y
	445	bool "ITM device support" if EMBEDDED
	446	depends on TOUCHSCREEN_USB_COMPOSITE
	447
	448	config TOUCHSCREEN_USB_ETURBO
	449	default y
	450	bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
	451	depends on TOUCHSCREEN_USB_COMPOSITE
	452
	453	config TOUCHSCREEN_USB_GUNZE
	454	default y
	455	bool "Gunze AHL61 device support" if EMBEDDED
	456	depends on TOUCHSCREEN_USB_COMPOSITE
	457
	458	config TOUCHSCREEN_USB_DMC_TSC10
	459	default y
	460	bool "DMC TSC-10/25 device support" if EMBEDDED
	461	depends on TOUCHSCREEN_USB_COMPOSITE
	462
df561fcd OZ	463	config TOUCHSCREEN_USB_IRTOUCH
	464	default y
	465	bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
	466	depends on TOUCHSCREEN_USB_COMPOSITE
	467
a14a8401 OZ	468	config TOUCHSCREEN_USB_IDEALTEK
	469	default y
	470	bool "IdealTEK URTC1000 device support" if EMBEDDED
	471	depends on TOUCHSCREEN_USB_COMPOSITE
	472
9d5657db IF	473	config TOUCHSCREEN_USB_GENERAL_TOUCH
	474	default y
	475	bool "GeneralTouch Touchscreen device support" if EMBEDDED
	476	depends on TOUCHSCREEN_USB_COMPOSITE
	477
14e40206 JJ	478	config TOUCHSCREEN_USB_GOTOP
	479	default y
	480	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
	481	depends on TOUCHSCREEN_USB_COMPOSITE
	482
f7370699 JP	483	config TOUCHSCREEN_USB_JASTEC
	484	default y
	485	bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EMBEDDED
	486	depends on TOUCHSCREEN_USB_COMPOSITE
	487
9e3b2583 FE	488	config TOUCHSCREEN_USB_E2I
	489	default y
	490	bool "e2i Touchscreen controller (e.g. from Mimo 740)"
	491	depends on TOUCHSCREEN_USB_COMPOSITE
	492
73422392 CN	493	config TOUCHSCREEN_TOUCHIT213
	494	tristate "Sahara TouchIT-213 touchscreen"
	495	select SERIO
	496	help
	497	Say Y here if you have a Sahara TouchIT-213 Tablet PC.
	498
	499	If unsure, say N.
	500
	501	To compile this driver as a module, choose M here: the
	502	module will be called touchit213.
	503
50b6f1f4 KL	504	config TOUCHSCREEN_TSC2007
	505	tristate "TSC2007 based touchscreens"
	506	depends on I2C
	507	help
	508	Say Y here if you have a TSC2007 based touchscreen.
	509
	510	If unsure, say N.
	511
	512	To compile this driver as a module, choose M here: the
	513	module will be called tsc2007.
	514
7e3f7375 WZ	515	config TOUCHSCREEN_W90X900
7e3f7375 WZ	516	tristate "W90P910 touchscreen driver"
b7788c5f	517	depends on HAVE_CLK
7e3f7375 WZ	518	help
	519	Say Y here if you have a W90P910 based touchscreen.
	520
	521	To compile this driver as a module, choose M here: the
	522	module will be called w90p910_ts.
	523
0387e107 DR	524	config TOUCHSCREEN_PCAP
	525	tristate "Motorola PCAP touchscreen"
	526	depends on EZX_PCAP
	527	help
	528	Say Y here if you have a Motorola EZX telephone and
	529	want to enable support for the built-in touchscreen.
	530
	531	To compile this driver as a module, choose M here: the
	532	module will be called pcap_ts.
1da177e4	533	endif