[linux-2.6-block.git] / drivers / input / mouse / synaptics_i2c.c

/*
 * Synaptics touchpad with I2C interface
 *
 * Copyright (C) 2009 Compulab, Ltd.
 * Mike Rapoport <mike@compulab.co.il>
 * Igor Grinberg <grinberg@compulab.co.il>
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file COPYING in the main directory of this archive for
 * more details.
 */

#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/workqueue.h>
#include <linux/slab.h>

#define DRIVER_NAME		"synaptics_i2c"
/* maximum product id is 15 characters */
#define PRODUCT_ID_LENGTH	15
#define REGISTER_LENGTH		8

/*
 * after soft reset, we should wait for 1 ms
 * before the device becomes operational
 */
#define SOFT_RESET_DELAY_MS	3
/* and after hard reset, we should wait for max 500ms */
#define HARD_RESET_DELAY_MS	500

/* Registers by SMBus address */
#define PAGE_SEL_REG		0xff
#define DEVICE_STATUS_REG	0x09

/* Registers by RMI address */
#define DEV_CONTROL_REG		0x0000
#define INTERRUPT_EN_REG	0x0001
#define ERR_STAT_REG		0x0002
#define INT_REQ_STAT_REG	0x0003
#define DEV_COMMAND_REG		0x0004

#define RMI_PROT_VER_REG	0x0200
#define MANUFACT_ID_REG		0x0201
#define PHYS_INT_VER_REG	0x0202
#define PROD_PROPERTY_REG	0x0203
#define INFO_QUERY_REG0		0x0204
#define INFO_QUERY_REG1		(INFO_QUERY_REG0 + 1)
#define INFO_QUERY_REG2		(INFO_QUERY_REG0 + 2)
#define INFO_QUERY_REG3		(INFO_QUERY_REG0 + 3)

#define PRODUCT_ID_REG0		0x0210
#define PRODUCT_ID_REG1		(PRODUCT_ID_REG0 + 1)
#define PRODUCT_ID_REG2		(PRODUCT_ID_REG0 + 2)
#define PRODUCT_ID_REG3		(PRODUCT_ID_REG0 + 3)
#define PRODUCT_ID_REG4		(PRODUCT_ID_REG0 + 4)
#define PRODUCT_ID_REG5		(PRODUCT_ID_REG0 + 5)
#define PRODUCT_ID_REG6		(PRODUCT_ID_REG0 + 6)
#define PRODUCT_ID_REG7		(PRODUCT_ID_REG0 + 7)
#define PRODUCT_ID_REG8		(PRODUCT_ID_REG0 + 8)
#define PRODUCT_ID_REG9		(PRODUCT_ID_REG0 + 9)
#define PRODUCT_ID_REG10	(PRODUCT_ID_REG0 + 10)
#define PRODUCT_ID_REG11	(PRODUCT_ID_REG0 + 11)
#define PRODUCT_ID_REG12	(PRODUCT_ID_REG0 + 12)
#define PRODUCT_ID_REG13	(PRODUCT_ID_REG0 + 13)
#define PRODUCT_ID_REG14	(PRODUCT_ID_REG0 + 14)
#define PRODUCT_ID_REG15	(PRODUCT_ID_REG0 + 15)

#define DATA_REG0		0x0400
#define ABS_PRESSURE_REG	0x0401
#define ABS_MSB_X_REG		0x0402
#define ABS_LSB_X_REG		(ABS_MSB_X_REG + 1)
#define ABS_MSB_Y_REG		0x0404
#define ABS_LSB_Y_REG		(ABS_MSB_Y_REG + 1)
#define REL_X_REG		0x0406
#define REL_Y_REG		0x0407

#define DEV_QUERY_REG0		0x1000
#define DEV_QUERY_REG1		(DEV_QUERY_REG0 + 1)
#define DEV_QUERY_REG2		(DEV_QUERY_REG0 + 2)
#define DEV_QUERY_REG3		(DEV_QUERY_REG0 + 3)
#define DEV_QUERY_REG4		(DEV_QUERY_REG0 + 4)
#define DEV_QUERY_REG5		(DEV_QUERY_REG0 + 5)
#define DEV_QUERY_REG6		(DEV_QUERY_REG0 + 6)
#define DEV_QUERY_REG7		(DEV_QUERY_REG0 + 7)
#define DEV_QUERY_REG8		(DEV_QUERY_REG0 + 8)

#define GENERAL_2D_CONTROL_REG	0x1041
#define SENSOR_SENSITIVITY_REG	0x1044
#define SENS_MAX_POS_MSB_REG	0x1046
#define SENS_MAX_POS_LSB_REG	(SENS_MAX_POS_UPPER_REG + 1)

/* Register bits */
/* Device Control Register Bits */
#define REPORT_RATE_1ST_BIT	6

/* Interrupt Enable Register Bits (INTERRUPT_EN_REG) */
#define F10_ABS_INT_ENA		0
#define F10_REL_INT_ENA		1
#define F20_INT_ENA		2

/* Interrupt Request Register Bits (INT_REQ_STAT_REG | DEVICE_STATUS_REG) */
#define F10_ABS_INT_REQ		0
#define F10_REL_INT_REQ		1
#define F20_INT_REQ		2
/* Device Status Register Bits (DEVICE_STATUS_REG) */
#define STAT_CONFIGURED		6
#define STAT_ERROR		7

/* Device Command Register Bits (DEV_COMMAND_REG) */
#define RESET_COMMAND		0x01
#define REZERO_COMMAND		0x02

/* Data Register 0 Bits (DATA_REG0) */
#define GESTURE			3

/* Device Query Registers Bits */
/* DEV_QUERY_REG3 */
#define HAS_PALM_DETECT		1
#define HAS_MULTI_FING		2
#define HAS_SCROLLER		4
#define HAS_2D_SCROLL		5

/* General 2D Control Register Bits (GENERAL_2D_CONTROL_REG) */
#define NO_DECELERATION		1
#define REDUCE_REPORTING	3
#define NO_FILTER		5

/* Function Masks */
/* Device Control Register Masks (DEV_CONTROL_REG) */
#define REPORT_RATE_MSK		0xc0
#define SLEEP_MODE_MSK		0x07

/* Device Sleep Modes */
#define FULL_AWAKE		0x0
#define NORMAL_OP		0x1
#define LOW_PWR_OP		0x2
#define VERY_LOW_PWR_OP		0x3
#define SENS_SLEEP		0x4
#define SLEEP_MOD		0x5
#define DEEP_SLEEP		0x6
#define HIBERNATE		0x7

/* Interrupt Register Mask */
/* (INT_REQ_STAT_REG | DEVICE_STATUS_REG | INTERRUPT_EN_REG) */
#define INT_ENA_REQ_MSK		0x07
#define INT_ENA_ABS_MSK		0x01
#define INT_ENA_REL_MSK		0x02
#define INT_ENA_F20_MSK		0x04

/* Device Status Register Masks (DEVICE_STATUS_REG) */
#define CONFIGURED_MSK		0x40
#define ERROR_MSK		0x80

/* Data Register 0 Masks */
#define FINGER_WIDTH_MSK	0xf0
#define GESTURE_MSK		0x08
#define SENSOR_STATUS_MSK	0x07

/*
 * MSB Position Register Masks
 * ABS_MSB_X_REG | ABS_MSB_Y_REG | SENS_MAX_POS_MSB_REG |
 * DEV_QUERY_REG3 | DEV_QUERY_REG5
 */
#define MSB_POSITION_MSK	0x1f

/* Device Query Registers Masks */

/* DEV_QUERY_REG2 */
#define NUM_EXTRA_POS_MSK	0x07

/* When in IRQ mode read the device every THREAD_IRQ_SLEEP_SECS */
#define THREAD_IRQ_SLEEP_SECS	2
#define THREAD_IRQ_SLEEP_MSECS	(THREAD_IRQ_SLEEP_SECS * MSEC_PER_SEC)

/*
 * When in Polling mode and no data received for NO_DATA_THRES msecs
 * reduce the polling rate to NO_DATA_SLEEP_MSECS
 */
#define NO_DATA_THRES		(MSEC_PER_SEC)
#define NO_DATA_SLEEP_MSECS	(MSEC_PER_SEC / 4)

/* Control touchpad's No Deceleration option */
static int no_decel = 1;
module_param(no_decel, bool, 0644);
MODULE_PARM_DESC(no_decel, "No Deceleration. Default = 1 (on)");

/* Control touchpad's Reduced Reporting option */
static int reduce_report;
module_param(reduce_report, bool, 0644);
MODULE_PARM_DESC(reduce_report, "Reduced Reporting. Default = 0 (off)");

/* Control touchpad's No Filter option */
static int no_filter;
module_param(no_filter, bool, 0644);
MODULE_PARM_DESC(no_filter, "No Filter. Default = 0 (off)");

/*
 * touchpad Attention line is Active Low and Open Drain,
 * therefore should be connected to pulled up line
 * and the irq configuration should be set to Falling Edge Trigger
 */
/* Control IRQ / Polling option */
static bool polling_req;
module_param(polling_req, bool, 0444);
MODULE_PARM_DESC(polling_req, "Request Polling. Default = 0 (use irq)");

/* Control Polling Rate */
static int scan_rate = 80;
module_param(scan_rate, int, 0644);
MODULE_PARM_DESC(scan_rate, "Polling rate in times/sec. Default = 80");

/* The main device structure */
struct synaptics_i2c {
	struct i2c_client	*client;
	struct input_dev	*input;
	struct delayed_work	dwork;
	spinlock_t		lock;
	int			no_data_count;
	int			no_decel_param;
	int			reduce_report_param;
	int			no_filter_param;
	int			scan_rate_param;
	int			scan_ms;
};

static inline void set_scan_rate(struct synaptics_i2c *touch, int scan_rate)
{
	touch->scan_ms = MSEC_PER_SEC / scan_rate;
	touch->scan_rate_param = scan_rate;
}

/*
 * Driver's initial design makes no race condition possible on i2c bus,
 * so there is no need in any locking.
 * Keep it in mind, while playing with the code.
 */
static s32 synaptics_i2c_reg_get(struct i2c_client *client, u16 reg)
{
	int ret;

	ret = i2c_smbus_write_byte_data(client, PAGE_SEL_REG, reg >> 8);
	if (ret == 0)
		ret = i2c_smbus_read_byte_data(client, reg & 0xff);

	return ret;
}

static s32 synaptics_i2c_reg_set(struct i2c_client *client, u16 reg, u8 val)
{
	int ret;

	ret = i2c_smbus_write_byte_data(client, PAGE_SEL_REG, reg >> 8);
	if (ret == 0)
		ret = i2c_smbus_write_byte_data(client, reg & 0xff, val);

	return ret;
}

static s32 synaptics_i2c_word_get(struct i2c_client *client, u16 reg)
{
	int ret;

	ret = i2c_smbus_write_byte_data(client, PAGE_SEL_REG, reg >> 8);
	if (ret == 0)
		ret = i2c_smbus_read_word_data(client, reg & 0xff);

	return ret;
}

static int synaptics_i2c_config(struct i2c_client *client)
{
	int ret, control;
	u8 int_en;

	/* set Report Rate to Device Highest (>=80) and Sleep to normal */
	ret = synaptics_i2c_reg_set(client, DEV_CONTROL_REG, 0xc1);
	if (ret)
		return ret;

	/* set Interrupt Disable to Func20 / Enable to Func10) */
	int_en = (polling_req) ? 0 : INT_ENA_ABS_MSK | INT_ENA_REL_MSK;
	ret = synaptics_i2c_reg_set(client, INTERRUPT_EN_REG, int_en);
	if (ret)
		return ret;

	control = synaptics_i2c_reg_get(client, GENERAL_2D_CONTROL_REG);
	/* No Deceleration */
	control |= no_decel ? 1 << NO_DECELERATION : 0;
	/* Reduced Reporting */
	control |= reduce_report ? 1 << REDUCE_REPORTING : 0;
	/* No Filter */
	control |= no_filter ? 1 << NO_FILTER : 0;
	ret = synaptics_i2c_reg_set(client, GENERAL_2D_CONTROL_REG, control);
	if (ret)
		return ret;

	return 0;
}

static int synaptics_i2c_reset_config(struct i2c_client *client)
{
	int ret;

	/* Reset the Touchpad */
	ret = synaptics_i2c_reg_set(client, DEV_COMMAND_REG, RESET_COMMAND);
	if (ret) {
		dev_err(&client->dev, "Unable to reset device\n");
	} else {
		msleep(SOFT_RESET_DELAY_MS);
		ret = synaptics_i2c_config(client);
		if (ret)
			dev_err(&client->dev, "Unable to config device\n");
	}

	return ret;
}

static int synaptics_i2c_check_error(struct i2c_client *client)
{
	int status, ret = 0;

	status = i2c_smbus_read_byte_data(client, DEVICE_STATUS_REG) &
		(CONFIGURED_MSK | ERROR_MSK);

	if (status != CONFIGURED_MSK)
		ret = synaptics_i2c_reset_config(client);

	return ret;
}

static bool synaptics_i2c_get_input(struct synaptics_i2c *touch)
{
	struct input_dev *input = touch->input;
	int xy_delta, gesture;
	s32 data;
	s8 x_delta, y_delta;

	/* Deal with spontanious resets and errors */
	if (synaptics_i2c_check_error(touch->client))
		return 0;

	/* Get Gesture Bit */
	data = synaptics_i2c_reg_get(touch->client, DATA_REG0);
	gesture = (data >> GESTURE) & 0x1;

	/*
	 * Get Relative axes. we have to get them in one shot,
	 * so we get 2 bytes starting from REL_X_REG.
	 */
	xy_delta = synaptics_i2c_word_get(touch->client, REL_X_REG) & 0xffff;

	/* Separate X from Y */
	x_delta = xy_delta & 0xff;
	y_delta = (xy_delta >> REGISTER_LENGTH) & 0xff;

	/* Report the button event */
	input_report_key(input, BTN_LEFT, gesture);

	/* Report the deltas */
	input_report_rel(input, REL_X, x_delta);
	input_report_rel(input, REL_Y, -y_delta);
	input_sync(input);

	return xy_delta || gesture;
}

static void synaptics_i2c_reschedule_work(struct synaptics_i2c *touch,
					  unsigned long delay)
{
	unsigned long flags;

	spin_lock_irqsave(&touch->lock, flags);

	/*
	 * If work is already scheduled then subsequent schedules will not
	 * change the scheduled time that's why we have to cancel it first.
	 */
	__cancel_delayed_work(&touch->dwork);
	schedule_delayed_work(&touch->dwork, delay);

	spin_unlock_irqrestore(&touch->lock, flags);
}

static irqreturn_t synaptics_i2c_irq(int irq, void *dev_id)
{
	struct synaptics_i2c *touch = dev_id;

	synaptics_i2c_reschedule_work(touch, 0);

	return IRQ_HANDLED;
}

static void synaptics_i2c_check_params(struct synaptics_i2c *touch)
{
	bool reset = false;

	if (scan_rate != touch->scan_rate_param)
		set_scan_rate(touch, scan_rate);

	if (no_decel != touch->no_decel_param) {
		touch->no_decel_param = no_decel;
		reset = true;
	}

	if (no_filter != touch->no_filter_param) {
		touch->no_filter_param = no_filter;
		reset = true;
	}

	if (reduce_report != touch->reduce_report_param) {
		touch->reduce_report_param = reduce_report;
		reset = true;
	}

	if (reset)
		synaptics_i2c_reset_config(touch->client);
}

/* Control the Device polling rate / Work Handler sleep time */
static unsigned long synaptics_i2c_adjust_delay(struct synaptics_i2c *touch,
						bool have_data)
{
	unsigned long delay, nodata_count_thres;

	if (polling_req) {
		delay = touch->scan_ms;
		if (have_data) {
			touch->no_data_count = 0;
		} else {
			nodata_count_thres = NO_DATA_THRES / touch->scan_ms;
			if (touch->no_data_count < nodata_count_thres)
				touch->no_data_count++;
			else
				delay = NO_DATA_SLEEP_MSECS;
		}
		return msecs_to_jiffies(delay);
	} else {
		delay = msecs_to_jiffies(THREAD_IRQ_SLEEP_MSECS);
		return round_jiffies_relative(delay);
	}
}

/* Work Handler */
static void synaptics_i2c_work_handler(struct work_struct *work)
{
	bool have_data;
	struct synaptics_i2c *touch =
			container_of(work, struct synaptics_i2c, dwork.work);
	unsigned long delay;

	synaptics_i2c_check_params(touch);

	have_data = synaptics_i2c_get_input(touch);
	delay = synaptics_i2c_adjust_delay(touch, have_data);

	/*
	 * While interrupt driven, there is no real need to poll the device.
	 * But touchpads are very sensitive, so there could be errors
	 * related to physical environment and the attention line isn't
	 * neccesarily asserted. In such case we can lose the touchpad.
	 * We poll the device once in THREAD_IRQ_SLEEP_SECS and
	 * if error is detected, we try to reset and reconfigure the touchpad.
	 */
	synaptics_i2c_reschedule_work(touch, delay);
}

static int synaptics_i2c_open(struct input_dev *input)
{
	struct synaptics_i2c *touch = input_get_drvdata(input);
	int ret;

	ret = synaptics_i2c_reset_config(touch->client);
	if (ret)
		return ret;

	if (polling_req)
		synaptics_i2c_reschedule_work(touch,
				msecs_to_jiffies(NO_DATA_SLEEP_MSECS));

	return 0;
}

static void synaptics_i2c_close(struct input_dev *input)
{
	struct synaptics_i2c *touch = input_get_drvdata(input);

	if (!polling_req)
		synaptics_i2c_reg_set(touch->client, INTERRUPT_EN_REG, 0);

	cancel_delayed_work_sync(&touch->dwork);

	/* Save some power */
	synaptics_i2c_reg_set(touch->client, DEV_CONTROL_REG, DEEP_SLEEP);
}

static void synaptics_i2c_set_input_params(struct synaptics_i2c *touch)
{
	struct input_dev *input = touch->input;

	input->name = touch->client->name;
	input->phys = touch->client->adapter->name;
	input->id.bustype = BUS_I2C;
	input->id.version = synaptics_i2c_word_get(touch->client,
						   INFO_QUERY_REG0);
	input->dev.parent = &touch->client->dev;
	input->open = synaptics_i2c_open;
	input->close = synaptics_i2c_close;
	input_set_drvdata(input, touch);

	/* Register the device as mouse */
	__set_bit(EV_REL, input->evbit);
	__set_bit(REL_X, input->relbit);
	__set_bit(REL_Y, input->relbit);

	/* Register device's buttons and keys */
	__set_bit(EV_KEY, input->evbit);
	__set_bit(BTN_LEFT, input->keybit);
}

static struct synaptics_i2c *synaptics_i2c_touch_create(struct i2c_client *client)
{
	struct synaptics_i2c *touch;

	touch = kzalloc(sizeof(struct synaptics_i2c), GFP_KERNEL);
	if (!touch)
		return NULL;

	touch->client = client;
	touch->no_decel_param = no_decel;
	touch->scan_rate_param = scan_rate;
	set_scan_rate(touch, scan_rate);
	INIT_DELAYED_WORK(&touch->dwork, synaptics_i2c_work_handler);
	spin_lock_init(&touch->lock);

	return touch;
}

static int __devinit synaptics_i2c_probe(struct i2c_client *client,
			       const struct i2c_device_id *dev_id)
{
	int ret;
	struct synaptics_i2c *touch;

	touch = synaptics_i2c_touch_create(client);
	if (!touch)
		return -ENOMEM;

	ret = synaptics_i2c_reset_config(client);
	if (ret)
		goto err_mem_free;

	if (client->irq < 1)
		polling_req = true;

	touch->input = input_allocate_device();
	if (!touch->input) {
		ret = -ENOMEM;
		goto err_mem_free;
	}

	synaptics_i2c_set_input_params(touch);

	if (!polling_req) {
		dev_dbg(&touch->client->dev,
			 "Requesting IRQ: %d\n", touch->client->irq);

		ret = request_irq(touch->client->irq, synaptics_i2c_irq,
				  IRQF_DISABLED|IRQ_TYPE_EDGE_FALLING,
				  DRIVER_NAME, touch);
		if (ret) {
			dev_warn(&touch->client->dev,
				  "IRQ request failed: %d, "
				  "falling back to polling\n", ret);
			polling_req = true;
			synaptics_i2c_reg_set(touch->client,
					      INTERRUPT_EN_REG, 0);
		}
	}

	if (polling_req)
		dev_dbg(&touch->client->dev,
			 "Using polling at rate: %d times/sec\n", scan_rate);

	/* Register the device in input subsystem */
	ret = input_register_device(touch->input);
	if (ret) {
		dev_err(&client->dev,
			 "Input device register failed: %d\n", ret);
		goto err_input_free;
	}

	i2c_set_clientdata(client, touch);

	return 0;

err_input_free:
	input_free_device(touch->input);
err_mem_free:
	kfree(touch);

	return ret;
}

static int __devexit synaptics_i2c_remove(struct i2c_client *client)
{
	struct synaptics_i2c *touch = i2c_get_clientdata(client);

	if (!polling_req)
		free_irq(client->irq, touch);

	input_unregister_device(touch->input);
	i2c_set_clientdata(client, NULL);
	kfree(touch);

	return 0;
}

#ifdef CONFIG_PM
static int synaptics_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
{
	struct synaptics_i2c *touch = i2c_get_clientdata(client);

	cancel_delayed_work_sync(&touch->dwork);

	/* Save some power */
	synaptics_i2c_reg_set(touch->client, DEV_CONTROL_REG, DEEP_SLEEP);

	return 0;
}

static int synaptics_i2c_resume(struct i2c_client *client)
{
	int ret;
	struct synaptics_i2c *touch = i2c_get_clientdata(client);

	ret = synaptics_i2c_reset_config(client);
	if (ret)
		return ret;

	synaptics_i2c_reschedule_work(touch,
				msecs_to_jiffies(NO_DATA_SLEEP_MSECS));

	return 0;
}
#else
#define synaptics_i2c_suspend	NULL
#define synaptics_i2c_resume	NULL
#endif

static const struct i2c_device_id synaptics_i2c_id_table[] = {
	{ "synaptics_i2c", 0 },
	{ },
};
MODULE_DEVICE_TABLE(i2c, synaptics_i2c_id_table);

static struct i2c_driver synaptics_i2c_driver = {
	.driver = {
		.name	= DRIVER_NAME,
		.owner	= THIS_MODULE,
	},

	.probe		= synaptics_i2c_probe,
	.remove		= __devexit_p(synaptics_i2c_remove),

	.suspend	= synaptics_i2c_suspend,
	.resume		= synaptics_i2c_resume,
	.id_table	= synaptics_i2c_id_table,
};

static int __init synaptics_i2c_init(void)
{
	return i2c_add_driver(&synaptics_i2c_driver);
}

static void __exit synaptics_i2c_exit(void)
{
	i2c_del_driver(&synaptics_i2c_driver);
}

module_init(synaptics_i2c_init);
module_exit(synaptics_i2c_exit);

MODULE_DESCRIPTION("Synaptics I2C touchpad driver");
MODULE_AUTHOR("Mike Rapoport, Igor Grinberg, Compulab");
MODULE_LICENSE("GPL");
Commit	Line	Data
eef3e4ca MR	1	/*
	2	* Synaptics touchpad with I2C interface
	3	*
	4	* Copyright (C) 2009 Compulab, Ltd.
	5	* Mike Rapoport <mike@compulab.co.il>
	6	* Igor Grinberg <grinberg@compulab.co.il>
	7	*
	8	* This file is subject to the terms and conditions of the GNU General Public
	9	* License. See the file COPYING in the main directory of this archive for
	10	* more details.
	11	*/
	12
	13	#include <linux/module.h>
	14	#include <linux/i2c.h>
	15	#include <linux/irq.h>
	16	#include <linux/interrupt.h>
	17	#include <linux/input.h>
	18	#include <linux/delay.h>
	19	#include <linux/workqueue.h>
5a0e3ad6	20	#include <linux/slab.h>
eef3e4ca MR	21
	22	#define DRIVER_NAME "synaptics_i2c"
	23	/* maximum product id is 15 characters */
	24	#define PRODUCT_ID_LENGTH 15
	25	#define REGISTER_LENGTH 8
	26
	27	/*
	28	* after soft reset, we should wait for 1 ms
	29	* before the device becomes operational
	30	*/
	31	#define SOFT_RESET_DELAY_MS 3
	32	/* and after hard reset, we should wait for max 500ms */
	33	#define HARD_RESET_DELAY_MS 500
	34
	35	/* Registers by SMBus address */
	36	#define PAGE_SEL_REG 0xff
	37	#define DEVICE_STATUS_REG 0x09
	38
	39	/* Registers by RMI address */
	40	#define DEV_CONTROL_REG 0x0000
	41	#define INTERRUPT_EN_REG 0x0001
	42	#define ERR_STAT_REG 0x0002
	43	#define INT_REQ_STAT_REG 0x0003
	44	#define DEV_COMMAND_REG 0x0004
	45
	46	#define RMI_PROT_VER_REG 0x0200
	47	#define MANUFACT_ID_REG 0x0201
	48	#define PHYS_INT_VER_REG 0x0202
	49	#define PROD_PROPERTY_REG 0x0203
	50	#define INFO_QUERY_REG0 0x0204
	51	#define INFO_QUERY_REG1 (INFO_QUERY_REG0 + 1)
	52	#define INFO_QUERY_REG2 (INFO_QUERY_REG0 + 2)
	53	#define INFO_QUERY_REG3 (INFO_QUERY_REG0 + 3)
	54
	55	#define PRODUCT_ID_REG0 0x0210
	56	#define PRODUCT_ID_REG1 (PRODUCT_ID_REG0 + 1)
	57	#define PRODUCT_ID_REG2 (PRODUCT_ID_REG0 + 2)
	58	#define PRODUCT_ID_REG3 (PRODUCT_ID_REG0 + 3)
	59	#define PRODUCT_ID_REG4 (PRODUCT_ID_REG0 + 4)
	60	#define PRODUCT_ID_REG5 (PRODUCT_ID_REG0 + 5)
	61	#define PRODUCT_ID_REG6 (PRODUCT_ID_REG0 + 6)
	62	#define PRODUCT_ID_REG7 (PRODUCT_ID_REG0 + 7)
	63	#define PRODUCT_ID_REG8 (PRODUCT_ID_REG0 + 8)
	64	#define PRODUCT_ID_REG9 (PRODUCT_ID_REG0 + 9)
	65	#define PRODUCT_ID_REG10 (PRODUCT_ID_REG0 + 10)
	66	#define PRODUCT_ID_REG11 (PRODUCT_ID_REG0 + 11)
	67	#define PRODUCT_ID_REG12 (PRODUCT_ID_REG0 + 12)
	68	#define PRODUCT_ID_REG13 (PRODUCT_ID_REG0 + 13)
	69	#define PRODUCT_ID_REG14 (PRODUCT_ID_REG0 + 14)
	70	#define PRODUCT_ID_REG15 (PRODUCT_ID_REG0 + 15)
	71
	72	#define DATA_REG0 0x0400
	73	#define ABS_PRESSURE_REG 0x0401
	74	#define ABS_MSB_X_REG 0x0402
	75	#define ABS_LSB_X_REG (ABS_MSB_X_REG + 1)
	76	#define ABS_MSB_Y_REG 0x0404
	77	#define ABS_LSB_Y_REG (ABS_MSB_Y_REG + 1)
	78	#define REL_X_REG 0x0406
	79	#define REL_Y_REG 0x0407
	80
	81	#define DEV_QUERY_REG0 0x1000
	82	#define DEV_QUERY_REG1 (DEV_QUERY_REG0 + 1)
	83	#define DEV_QUERY_REG2 (DEV_QUERY_REG0 + 2)
	84	#define DEV_QUERY_REG3 (DEV_QUERY_REG0 + 3)
85	#define DEV_QUERY_REG4 (DEV_QUERY_REG0 + 4)
86	#define DEV_QUERY_REG5 (DEV_QUERY_REG0 + 5)
87	#define DEV_QUERY_REG6 (DEV_QUERY_REG0 + 6)
88	#define DEV_QUERY_REG7 (DEV_QUERY_REG0 + 7)
89	#define DEV_QUERY_REG8 (DEV_QUERY_REG0 + 8)
90
91	#define GENERAL_2D_CONTROL_REG 0x1041
92	#define SENSOR_SENSITIVITY_REG 0x1044
93	#define SENS_MAX_POS_MSB_REG 0x1046
94	#define SENS_MAX_POS_LSB_REG (SENS_MAX_POS_UPPER_REG + 1)
95
96	/* Register bits */
97	/* Device Control Register Bits */
98	#define REPORT_RATE_1ST_BIT 6
99
100	/* Interrupt Enable Register Bits (INTERRUPT_EN_REG) */
101	#define F10_ABS_INT_ENA 0
102	#define F10_REL_INT_ENA 1
103	#define F20_INT_ENA 2
104
105	/* Interrupt Request Register Bits (INT_REQ_STAT_REG \| DEVICE_STATUS_REG) */
106	#define F10_ABS_INT_REQ 0
107	#define F10_REL_INT_REQ 1
108	#define F20_INT_REQ 2
109	/* Device Status Register Bits (DEVICE_STATUS_REG) */
110	#define STAT_CONFIGURED 6
111	#define STAT_ERROR 7
112
113	/* Device Command Register Bits (DEV_COMMAND_REG) */
114	#define RESET_COMMAND 0x01
115	#define REZERO_COMMAND 0x02
116
117	/* Data Register 0 Bits (DATA_REG0) */
118	#define GESTURE 3
119
120	/* Device Query Registers Bits */
121	/* DEV_QUERY_REG3 */
122	#define HAS_PALM_DETECT 1
123	#define HAS_MULTI_FING 2
124	#define HAS_SCROLLER 4
125	#define HAS_2D_SCROLL 5
126
127	/* General 2D Control Register Bits (GENERAL_2D_CONTROL_REG) */
128	#define NO_DECELERATION 1
129	#define REDUCE_REPORTING 3
130	#define NO_FILTER 5
131
132	/* Function Masks */
133	/* Device Control Register Masks (DEV_CONTROL_REG) */
134	#define REPORT_RATE_MSK 0xc0
135	#define SLEEP_MODE_MSK 0x07
136
137	/* Device Sleep Modes */
138	#define FULL_AWAKE 0x0
139	#define NORMAL_OP 0x1
140	#define LOW_PWR_OP 0x2
141	#define VERY_LOW_PWR_OP 0x3
142	#define SENS_SLEEP 0x4
143	#define SLEEP_MOD 0x5
144	#define DEEP_SLEEP 0x6
145	#define HIBERNATE 0x7
146
147	/* Interrupt Register Mask */
148	/* (INT_REQ_STAT_REG \| DEVICE_STATUS_REG \| INTERRUPT_EN_REG) */
149	#define INT_ENA_REQ_MSK 0x07
150	#define INT_ENA_ABS_MSK 0x01
151	#define INT_ENA_REL_MSK 0x02
152	#define INT_ENA_F20_MSK 0x04
153
154	/* Device Status Register Masks (DEVICE_STATUS_REG) */
155	#define CONFIGURED_MSK 0x40
156	#define ERROR_MSK 0x80
157
158	/* Data Register 0 Masks */
159	#define FINGER_WIDTH_MSK 0xf0
160	#define GESTURE_MSK 0x08
161	#define SENSOR_STATUS_MSK 0x07
162
163	/*
164	* MSB Position Register Masks
165	* ABS_MSB_X_REG \| ABS_MSB_Y_REG \| SENS_MAX_POS_MSB_REG \|
166	* DEV_QUERY_REG3 \| DEV_QUERY_REG5
167	*/
168	#define MSB_POSITION_MSK 0x1f
169
170	/* Device Query Registers Masks */
171
172	/* DEV_QUERY_REG2 */
173	#define NUM_EXTRA_POS_MSK 0x07
174
175	/* When in IRQ mode read the device every THREAD_IRQ_SLEEP_SECS */
176	#define THREAD_IRQ_SLEEP_SECS 2
177	#define THREAD_IRQ_SLEEP_MSECS (THREAD_IRQ_SLEEP_SECS * MSEC_PER_SEC)
178
179	/*
180	* When in Polling mode and no data received for NO_DATA_THRES msecs
181	* reduce the polling rate to NO_DATA_SLEEP_MSECS
182	*/
183	#define NO_DATA_THRES (MSEC_PER_SEC)
184	#define NO_DATA_SLEEP_MSECS (MSEC_PER_SEC / 4)
185
186	/* Control touchpad's No Deceleration option */
187	static int no_decel = 1;
188	module_param(no_decel, bool, 0644);
189	MODULE_PARM_DESC(no_decel, "No Deceleration. Default = 1 (on)");
190
191	/* Control touchpad's Reduced Reporting option */
192	static int reduce_report;
193	module_param(reduce_report, bool, 0644);
194	MODULE_PARM_DESC(reduce_report, "Reduced Reporting. Default = 0 (off)");
195
196	/* Control touchpad's No Filter option */
197	static int no_filter;
198	module_param(no_filter, bool, 0644);
199	MODULE_PARM_DESC(no_filter, "No Filter. Default = 0 (off)");
200
201	/*
202	* touchpad Attention line is Active Low and Open Drain,
203	* therefore should be connected to pulled up line
204	* and the irq configuration should be set to Falling Edge Trigger
205	*/
206	/* Control IRQ / Polling option */
30b37131	207	static bool polling_req;
eef3e4ca MR	208	module_param(polling_req, bool, 0444);
	209	MODULE_PARM_DESC(polling_req, "Request Polling. Default = 0 (use irq)");
	210
	211	/* Control Polling Rate */
	212	static int scan_rate = 80;
	213	module_param(scan_rate, int, 0644);
	214	MODULE_PARM_DESC(scan_rate, "Polling rate in times/sec. Default = 80");
	215
	216	/* The main device structure */
	217	struct synaptics_i2c {
	218	struct i2c_client *client;
	219	struct input_dev *input;
	220	struct delayed_work dwork;
30b37131	221	spinlock_t lock;
eef3e4ca MR	222	int no_data_count;
	223	int no_decel_param;
	224	int reduce_report_param;
	225	int no_filter_param;
	226	int scan_rate_param;
	227	int scan_ms;
	228	};
	229
	230	static inline void set_scan_rate(struct synaptics_i2c *touch, int scan_rate)
	231	{
	232	touch->scan_ms = MSEC_PER_SEC / scan_rate;
	233	touch->scan_rate_param = scan_rate;
	234	}
	235
	236	/*
	237	* Driver's initial design makes no race condition possible on i2c bus,
	238	* so there is no need in any locking.
	239	* Keep it in mind, while playing with the code.
	240	*/
	241	static s32 synaptics_i2c_reg_get(struct i2c_client *client, u16 reg)
	242	{
	243	int ret;
	244
	245	ret = i2c_smbus_write_byte_data(client, PAGE_SEL_REG, reg >> 8);
	246	if (ret == 0)
	247	ret = i2c_smbus_read_byte_data(client, reg & 0xff);
	248
	249	return ret;
	250	}
	251
	252	static s32 synaptics_i2c_reg_set(struct i2c_client *client, u16 reg, u8 val)
	253	{
	254	int ret;
	255
	256	ret = i2c_smbus_write_byte_data(client, PAGE_SEL_REG, reg >> 8);
	257	if (ret == 0)
	258	ret = i2c_smbus_write_byte_data(client, reg & 0xff, val);
	259
	260	return ret;
	261	}
	262
	263	static s32 synaptics_i2c_word_get(struct i2c_client *client, u16 reg)
	264	{
	265	int ret;
	266
	267	ret = i2c_smbus_write_byte_data(client, PAGE_SEL_REG, reg >> 8);
	268	if (ret == 0)
	269	ret = i2c_smbus_read_word_data(client, reg & 0xff);
	270
	271	return ret;
	272	}
	273
	274	static int synaptics_i2c_config(struct i2c_client *client)
	275	{
	276	int ret, control;
	277	u8 int_en;
	278
	279	/* set Report Rate to Device Highest (>=80) and Sleep to normal */
	280	ret = synaptics_i2c_reg_set(client, DEV_CONTROL_REG, 0xc1);
	281	if (ret)
	282	return ret;
	283
	284	/* set Interrupt Disable to Func20 / Enable to Func10) */
	285	int_en = (polling_req) ? 0 : INT_ENA_ABS_MSK \| INT_ENA_REL_MSK;
286	ret = synaptics_i2c_reg_set(client, INTERRUPT_EN_REG, int_en);
287	if (ret)
288	return ret;
289
290	control = synaptics_i2c_reg_get(client, GENERAL_2D_CONTROL_REG);
291	/* No Deceleration */
292	control \|= no_decel ? 1 << NO_DECELERATION : 0;
293	/* Reduced Reporting */
294	control \|= reduce_report ? 1 << REDUCE_REPORTING : 0;
295	/* No Filter */
296	control \|= no_filter ? 1 << NO_FILTER : 0;
297	ret = synaptics_i2c_reg_set(client, GENERAL_2D_CONTROL_REG, control);
298	if (ret)
299	return ret;
300
301	return 0;
302	}
303
304	static int synaptics_i2c_reset_config(struct i2c_client *client)
305	{
306	int ret;
307
308	/* Reset the Touchpad */
309	ret = synaptics_i2c_reg_set(client, DEV_COMMAND_REG, RESET_COMMAND);
310	if (ret) {
311	dev_err(&client->dev, "Unable to reset device\n");
312	} else {
313	msleep(SOFT_RESET_DELAY_MS);
314	ret = synaptics_i2c_config(client);
315	if (ret)
316	dev_err(&client->dev, "Unable to config device\n");
317	}
318
319	return ret;
320	}
321
322	static int synaptics_i2c_check_error(struct i2c_client *client)
323	{
324	int status, ret = 0;
325
326	status = i2c_smbus_read_byte_data(client, DEVICE_STATUS_REG) &
327	(CONFIGURED_MSK \| ERROR_MSK);
328
329	if (status != CONFIGURED_MSK)
330	ret = synaptics_i2c_reset_config(client);
331
332	return ret;
333	}
334
335	static bool synaptics_i2c_get_input(struct synaptics_i2c *touch)
336	{
337	struct input_dev *input = touch->input;
338	int xy_delta, gesture;
339	s32 data;
340	s8 x_delta, y_delta;
341
342	/* Deal with spontanious resets and errors */
343	if (synaptics_i2c_check_error(touch->client))
344	return 0;
345
346	/* Get Gesture Bit */
347	data = synaptics_i2c_reg_get(touch->client, DATA_REG0);
348	gesture = (data >> GESTURE) & 0x1;
349
350	/*
351	* Get Relative axes. we have to get them in one shot,
352	* so we get 2 bytes starting from REL_X_REG.
353	*/
354	xy_delta = synaptics_i2c_word_get(touch->client, REL_X_REG) & 0xffff;
355
356	/* Separate X from Y */
357	x_delta = xy_delta & 0xff;
358	y_delta = (xy_delta >> REGISTER_LENGTH) & 0xff;
359
360	/* Report the button event */
361	input_report_key(input, BTN_LEFT, gesture);
362
363	/* Report the deltas */
364	input_report_rel(input, REL_X, x_delta);
365	input_report_rel(input, REL_Y, -y_delta);
366	input_sync(input);
367
368	return xy_delta \|\| gesture;
369	}
370
30b37131 DT	371	static void synaptics_i2c_reschedule_work(struct synaptics_i2c *touch,
30b37131 DT	372	unsigned long delay)
eef3e4ca	373	{
30b37131 DT	374	unsigned long flags;
	375
	376	spin_lock_irqsave(&touch->lock, flags);
eef3e4ca MR	377
eef3e4ca MR	378	/*
30b37131 DT	379	* If work is already scheduled then subsequent schedules will not
30b37131 DT	380	* change the scheduled time that's why we have to cancel it first.
eef3e4ca	381	*/
30b37131 DT	382	__cancel_delayed_work(&touch->dwork);
	383	schedule_delayed_work(&touch->dwork, delay);
	384
	385	spin_unlock_irqrestore(&touch->lock, flags);
	386	}
	387
	388	static irqreturn_t synaptics_i2c_irq(int irq, void *dev_id)
	389	{
	390	struct synaptics_i2c *touch = dev_id;
	391
	392	synaptics_i2c_reschedule_work(touch, 0);
eef3e4ca MR	393
	394	return IRQ_HANDLED;
	395	}
	396
	397	static void synaptics_i2c_check_params(struct synaptics_i2c *touch)
	398	{
	399	bool reset = false;
	400
	401	if (scan_rate != touch->scan_rate_param)
	402	set_scan_rate(touch, scan_rate);
	403
	404	if (no_decel != touch->no_decel_param) {
	405	touch->no_decel_param = no_decel;
	406	reset = true;
	407	}
	408
	409	if (no_filter != touch->no_filter_param) {
	410	touch->no_filter_param = no_filter;
	411	reset = true;
	412	}
	413
	414	if (reduce_report != touch->reduce_report_param) {
	415	touch->reduce_report_param = reduce_report;
	416	reset = true;
	417	}
	418
	419	if (reset)
	420	synaptics_i2c_reset_config(touch->client);
	421	}
	422
	423	/* Control the Device polling rate / Work Handler sleep time */
f5ba3502 DT	424	static unsigned long synaptics_i2c_adjust_delay(struct synaptics_i2c *touch,
f5ba3502 DT	425	bool have_data)
eef3e4ca MR	426	{
	427	unsigned long delay, nodata_count_thres;
	428
	429	if (polling_req) {
	430	delay = touch->scan_ms;
	431	if (have_data) {
	432	touch->no_data_count = 0;
	433	} else {
	434	nodata_count_thres = NO_DATA_THRES / touch->scan_ms;
	435	if (touch->no_data_count < nodata_count_thres)
	436	touch->no_data_count++;
	437	else
	438	delay = NO_DATA_SLEEP_MSECS;
	439	}
	440	return msecs_to_jiffies(delay);
	441	} else {
	442	delay = msecs_to_jiffies(THREAD_IRQ_SLEEP_MSECS);
	443	return round_jiffies_relative(delay);
	444	}
	445	}
	446
	447	/* Work Handler */
	448	static void synaptics_i2c_work_handler(struct work_struct *work)
	449	{
	450	bool have_data;
	451	struct synaptics_i2c *touch =
	452	container_of(work, struct synaptics_i2c, dwork.work);
	453	unsigned long delay;
	454
	455	synaptics_i2c_check_params(touch);
	456
	457	have_data = synaptics_i2c_get_input(touch);
	458	delay = synaptics_i2c_adjust_delay(touch, have_data);
	459
	460	/*
	461	* While interrupt driven, there is no real need to poll the device.
	462	* But touchpads are very sensitive, so there could be errors
	463	* related to physical environment and the attention line isn't
	464	* neccesarily asserted. In such case we can lose the touchpad.
	465	* We poll the device once in THREAD_IRQ_SLEEP_SECS and
	466	* if error is detected, we try to reset and reconfigure the touchpad.
	467	*/
30b37131	468	synaptics_i2c_reschedule_work(touch, delay);
eef3e4ca MR	469	}
	470
	471	static int synaptics_i2c_open(struct input_dev *input)
	472	{
	473	struct synaptics_i2c *touch = input_get_drvdata(input);
	474	int ret;
	475
	476	ret = synaptics_i2c_reset_config(touch->client);
	477	if (ret)
	478	return ret;
	479
	480	if (polling_req)
30b37131 DT	481	synaptics_i2c_reschedule_work(touch,
30b37131 DT	482	msecs_to_jiffies(NO_DATA_SLEEP_MSECS));
eef3e4ca MR	483
	484	return 0;
	485	}
	486
	487	static void synaptics_i2c_close(struct input_dev *input)
	488	{
	489	struct synaptics_i2c *touch = input_get_drvdata(input);
	490
	491	if (!polling_req)
	492	synaptics_i2c_reg_set(touch->client, INTERRUPT_EN_REG, 0);
	493
	494	cancel_delayed_work_sync(&touch->dwork);
	495
	496	/* Save some power */
	497	synaptics_i2c_reg_set(touch->client, DEV_CONTROL_REG, DEEP_SLEEP);
	498	}
	499
	500	static void synaptics_i2c_set_input_params(struct synaptics_i2c *touch)
	501	{
	502	struct input_dev *input = touch->input;
	503
	504	input->name = touch->client->name;
	505	input->phys = touch->client->adapter->name;
	506	input->id.bustype = BUS_I2C;
	507	input->id.version = synaptics_i2c_word_get(touch->client,
	508	INFO_QUERY_REG0);
	509	input->dev.parent = &touch->client->dev;
	510	input->open = synaptics_i2c_open;
	511	input->close = synaptics_i2c_close;
	512	input_set_drvdata(input, touch);
	513
	514	/* Register the device as mouse */
	515	__set_bit(EV_REL, input->evbit);
	516	__set_bit(REL_X, input->relbit);
	517	__set_bit(REL_Y, input->relbit);
	518
	519	/* Register device's buttons and keys */
	520	__set_bit(EV_KEY, input->evbit);
	521	__set_bit(BTN_LEFT, input->keybit);
	522	}
	523
f5ba3502	524	static struct synaptics_i2c synaptics_i2c_touch_create(struct i2c_client client)
eef3e4ca MR	525	{
	526	struct synaptics_i2c *touch;
	527
	528	touch = kzalloc(sizeof(struct synaptics_i2c), GFP_KERNEL);
	529	if (!touch)
	530	return NULL;
	531
	532	touch->client = client;
	533	touch->no_decel_param = no_decel;
	534	touch->scan_rate_param = scan_rate;
	535	set_scan_rate(touch, scan_rate);
	536	INIT_DELAYED_WORK(&touch->dwork, synaptics_i2c_work_handler);
30b37131	537	spin_lock_init(&touch->lock);
eef3e4ca MR	538
	539	return touch;
	540	}
	541
	542	static int __devinit synaptics_i2c_probe(struct i2c_client *client,
	543	const struct i2c_device_id *dev_id)
	544	{
	545	int ret;
	546	struct synaptics_i2c *touch;
	547
	548	touch = synaptics_i2c_touch_create(client);
	549	if (!touch)
	550	return -ENOMEM;
	551
eef3e4ca MR	552	ret = synaptics_i2c_reset_config(client);
	553	if (ret)
	554	goto err_mem_free;
	555
	556	if (client->irq < 1)
30b37131	557	polling_req = true;
eef3e4ca MR	558
	559	touch->input = input_allocate_device();
	560	if (!touch->input) {
	561	ret = -ENOMEM;
	562	goto err_mem_free;
	563	}
	564
	565	synaptics_i2c_set_input_params(touch);
	566
	567	if (!polling_req) {
	568	dev_dbg(&touch->client->dev,
	569	"Requesting IRQ: %d\n", touch->client->irq);
	570
	571	ret = request_irq(touch->client->irq, synaptics_i2c_irq,
	572	IRQF_DISABLED\|IRQ_TYPE_EDGE_FALLING,
	573	DRIVER_NAME, touch);
	574	if (ret) {
	575	dev_warn(&touch->client->dev,
	576	"IRQ request failed: %d, "
	577	"falling back to polling\n", ret);
30b37131	578	polling_req = true;
eef3e4ca MR	579	synaptics_i2c_reg_set(touch->client,
	580	INTERRUPT_EN_REG, 0);
	581	}
	582	}
	583
	584	if (polling_req)
	585	dev_dbg(&touch->client->dev,
	586	"Using polling at rate: %d times/sec\n", scan_rate);
	587
	588	/* Register the device in input subsystem */
	589	ret = input_register_device(touch->input);
	590	if (ret) {
	591	dev_err(&client->dev,
	592	"Input device register failed: %d\n", ret);
	593	goto err_input_free;
	594	}
30b37131 DT	595
	596	i2c_set_clientdata(client, touch);
	597
eef3e4ca MR	598	return 0;
	599
	600	err_input_free:
	601	input_free_device(touch->input);
	602	err_mem_free:
eef3e4ca MR	603	kfree(touch);
	604
	605	return ret;
	606	}
	607
	608	static int __devexit synaptics_i2c_remove(struct i2c_client *client)
	609	{
	610	struct synaptics_i2c *touch = i2c_get_clientdata(client);
	611
	612	if (!polling_req)
30b37131	613	free_irq(client->irq, touch);
eef3e4ca MR	614
	615	input_unregister_device(touch->input);
	616	i2c_set_clientdata(client, NULL);
	617	kfree(touch);
	618
	619	return 0;
	620	}
	621
	622	#ifdef CONFIG_PM
	623	static int synaptics_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
	624	{
	625	struct synaptics_i2c *touch = i2c_get_clientdata(client);
	626
	627	cancel_delayed_work_sync(&touch->dwork);
	628
	629	/* Save some power */
	630	synaptics_i2c_reg_set(touch->client, DEV_CONTROL_REG, DEEP_SLEEP);
	631
	632	return 0;
	633	}
	634
	635	static int synaptics_i2c_resume(struct i2c_client *client)
	636	{
	637	int ret;
	638	struct synaptics_i2c *touch = i2c_get_clientdata(client);
	639
	640	ret = synaptics_i2c_reset_config(client);
	641	if (ret)
	642	return ret;
	643
30b37131 DT	644	synaptics_i2c_reschedule_work(touch,
30b37131 DT	645	msecs_to_jiffies(NO_DATA_SLEEP_MSECS));
eef3e4ca MR	646
	647	return 0;
	648	}
	649	#else
	650	#define synaptics_i2c_suspend NULL
	651	#define synaptics_i2c_resume NULL
	652	#endif
	653
	654	static const struct i2c_device_id synaptics_i2c_id_table[] = {
	655	{ "synaptics_i2c", 0 },
	656	{ },
	657	};
	658	MODULE_DEVICE_TABLE(i2c, synaptics_i2c_id_table);
	659
	660	static struct i2c_driver synaptics_i2c_driver = {
	661	.driver = {
	662	.name = DRIVER_NAME,
	663	.owner = THIS_MODULE,
	664	},
	665
	666	.probe = synaptics_i2c_probe,
	667	.remove = __devexit_p(synaptics_i2c_remove),
	668
	669	.suspend = synaptics_i2c_suspend,
	670	.resume = synaptics_i2c_resume,
	671	.id_table = synaptics_i2c_id_table,
	672	};
	673
	674	static int __init synaptics_i2c_init(void)
	675	{
	676	return i2c_add_driver(&synaptics_i2c_driver);
	677	}
	678
	679	static void __exit synaptics_i2c_exit(void)
	680	{
	681	i2c_del_driver(&synaptics_i2c_driver);
	682	}
	683
	684	module_init(synaptics_i2c_init);
	685	module_exit(synaptics_i2c_exit);
	686
	687	MODULE_DESCRIPTION("Synaptics I2C touchpad driver");
	688	MODULE_AUTHOR("Mike Rapoport, Igor Grinberg, Compulab");
	689	MODULE_LICENSE("GPL");
	690