[linux-2.6-block.git] / drivers / iio / magnetometer / Kconfig

# SPDX-License-Identifier: GPL-2.0-only
#
# Magnetometer sensors
#
# When adding new entries keep the list in alphabetical order

menu "Magnetometer sensors"

config AF8133J
	tristate "Voltafield AF8133J 3-Axis Magnetometer"
	depends on I2C
	depends on OF
	select REGMAP_I2C
	help
	  Say yes here to build support for Voltafield AF8133J I2C-based
	  3-axis magnetometer chip.

	  To compile this driver as a module, choose M here: the module
	  will be called af8133j.

config AK8974
	tristate "Asahi Kasei AK8974 3-Axis Magnetometer"
	depends on I2C
	select REGMAP_I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	  Say yes here to build support for Asahi Kasei AK8974, AMI305 or
	  AMI306 I2C-based 3-axis magnetometer chips.

	  To compile this driver as a module, choose M here: the module
	  will be called ak8974.

config AK8975
	tristate "Asahi Kasei AK8975 3-Axis Magnetometer"
	depends on I2C
	depends on GPIOLIB || COMPILE_TEST
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	  Say yes here to build support for Asahi Kasei AK8975, AK8963,
	  AK09911, AK09912 or AK09916 3-Axis Magnetometer.

	  To compile this driver as a module, choose M here: the module
	  will be called ak8975.

config AK09911
	tristate "Asahi Kasei AK09911 3-axis Compass"
	depends on I2C
	depends on GPIOLIB || COMPILE_TEST
	select AK8975
	help
	  Deprecated: AK09911 is now supported by AK8975 driver.

config BMC150_MAGN
	tristate
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER

config BMC150_MAGN_I2C
	tristate "Bosch BMC150 I2C Magnetometer Driver"
	depends on I2C
	select BMC150_MAGN
	select REGMAP_I2C
	help
	  Say yes here to build support for the BMC150 magnetometer with
	  I2C interface.

	  This is a combo module with both accelerometer and magnetometer.
	  This driver is only implementing magnetometer part, which has
	  its own address and register map.

	  This driver also supports I2C Bosch BMC156 and BMM150 chips.
	  To compile this driver as a module, choose M here: the module will be
	  called bmc150_magn_i2c.

config BMC150_MAGN_SPI
	tristate "Bosch BMC150 SPI Magnetometer Driver"
	depends on SPI
	select BMC150_MAGN
	select REGMAP_SPI
	help
	  Say yes here to build support for the BMC150 magnetometer with
	  SPI interface.

	  This is a combo module with both accelerometer and magnetometer.
	  This driver is only implementing magnetometer part, which has
	  its own address and register map.

	  This driver also supports SPI Bosch BMC156 and BMM150 chips.
	  To compile this driver as a module, choose M here: the module will be
	  called bmc150_magn_spi.

config MAG3110
	tristate "Freescale MAG3110 3-Axis Magnetometer"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	  Say yes here to build support for the Freescale MAG3110 3-Axis
	  magnetometer.

	  To compile this driver as a module, choose M here: the module
	  will be called mag3110.

config HID_SENSOR_MAGNETOMETER_3D
	depends on HID_SENSOR_HUB
	select IIO_BUFFER
	select HID_SENSOR_IIO_COMMON
	select HID_SENSOR_IIO_TRIGGER
	tristate "HID Magenetometer 3D"
	help
	  Say yes here to build support for the HID SENSOR
	  Magnetometer 3D.

config MMC35240
	tristate "MEMSIC MMC35240 3-axis magnetic sensor"
	select REGMAP_I2C
	depends on I2C
	help
	  Say yes here to build support for the MEMSIC MMC35240 3-axis
	  magnetic sensor.

	  To compile this driver as a module, choose M here: the module
	  will be called mmc35240.

config IIO_ST_MAGN_3AXIS
	tristate "STMicroelectronics magnetometers 3-Axis Driver"
	depends on (I2C || SPI_MASTER) && SYSFS
	select IIO_ST_SENSORS_CORE
	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
	help
	  Say yes here to build support for STMicroelectronics magnetometers:
	  LSM303C, LSM303DLHC, LSM303DLM, LIS3MDL.

	  Also need to enable at least one of I2C and SPI interface drivers
	  below.

config IIO_ST_MAGN_I2C_3AXIS
	tristate "STMicroelectronics magnetometers 3-Axis I2C Interface"
	depends on I2C && IIO_ST_MAGN_3AXIS
	default I2C && IIO_ST_MAGN_3AXIS
	select IIO_ST_SENSORS_I2C
	help
	  Build support for STMicroelectronics magnetometers I2C interface.

	  To compile this driver as a module, choose M here. The module
	  will be called st_magn_i2c.

config IIO_ST_MAGN_SPI_3AXIS
	tristate "STMicroelectronics magnetometers 3-Axis SPI Interface"
	depends on SPI_MASTER && IIO_ST_MAGN_3AXIS
	default SPI_MASTER && IIO_ST_MAGN_3AXIS
	select IIO_ST_SENSORS_SPI
	help
	  Build support for STMicroelectronics magnetometers SPI interface.

	  To compile this driver as a module, choose M here. The module
	  will be called st_magn_spi.

config SENSORS_HMC5843
	tristate
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER

config SENSORS_HMC5843_I2C
	tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)"
	depends on I2C
	select SENSORS_HMC5843
	select REGMAP_I2C
	help
	  Say Y here to add support for the Honeywell HMC5843, HMC5883 and
	  HMC5883L 3-Axis Magnetometer (digital compass).

	  This driver can also be compiled as a set of modules.
	  If so, these modules will be created:
	  - hmc5843_core (core functions)
	  - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983)

config SENSORS_HMC5843_SPI
	tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)"
	depends on SPI_MASTER
	select SENSORS_HMC5843
	select REGMAP_SPI
	help
	  Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer
	  (digital compass).

	  This driver can also be compiled as a set of modules.
	  If so, these modules will be created:
	  - hmc5843_core (core functions)
	  - hmc5843_spi (support for HMC5983)

config SENSORS_RM3100
	tristate
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER

config SENSORS_RM3100_I2C
	tristate "PNI RM3100 3-Axis Magnetometer (I2C)"
	depends on I2C
	select SENSORS_RM3100
	select REGMAP_I2C
	help
	  Say Y here to add support for the PNI RM3100 3-Axis Magnetometer.

	  This driver can also be compiled as a module.
	  To compile this driver as a module, choose M here: the module
	  will be called rm3100-i2c.

config SENSORS_RM3100_SPI
	tristate "PNI RM3100 3-Axis Magnetometer (SPI)"
	depends on SPI_MASTER
	select SENSORS_RM3100
	select REGMAP_SPI
	help
	  Say Y here to add support for the PNI RM3100 3-Axis Magnetometer.

	  This driver can also be compiled as a module.
	  To compile this driver as a module, choose M here: the module
	  will be called rm3100-spi.

config TI_TMAG5273
	tristate "TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor"
	depends on I2C
	select REGMAP_I2C
	help
	  Say Y here to add support for the TI TMAG5273 Low-Power
	  Linear 3D Hall-Effect Sensor.

	  This driver can also be compiled as a module.
	  To compile this driver as a module, choose M here: the module
	  will be called tmag5273.

config YAMAHA_YAS530
	tristate "Yamaha YAS530 family of 3-Axis Magnetometers (I2C)"
	depends on I2C
	select REGMAP_I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	  Say Y here to add support for the Yamaha YAS530 series of
	  3-Axis Magnetometers. YAS530, YAS532, YAS533 and YAS537 are
	  supported.

	  This driver can also be compiled as a module.
	  To compile this driver as a module, choose M here: the module
	  will be called yamaha-yas.

endmenu
Commit	Line	Data
ec8f24b7	1	# SPDX-License-Identifier: GPL-2.0-only
bc1d57ba	2	#
	3	# Magnetometer sensors
	4	#
3edc84e6 LPC	5	# When adding new entries keep the list in alphabetical order
3edc84e6 LPC	6
bc1d57ba	7	menu "Magnetometer sensors"
bc1d57ba	8
1d8f4b04 IZ	9	config AF8133J
	10	tristate "Voltafield AF8133J 3-Axis Magnetometer"
	11	depends on I2C
	12	depends on OF
	13	select REGMAP_I2C
	14	help
	15	Say yes here to build support for Voltafield AF8133J I2C-based
	16	3-axis magnetometer chip.
	17
	18	To compile this driver as a module, choose M here: the module
	19	will be called af8133j.
	20
7c94a8b2 LW	21	config AK8974
	22	tristate "Asahi Kasei AK8974 3-Axis Magnetometer"
	23	depends on I2C
7c94a8b2 LW	24	select REGMAP_I2C
	25	select IIO_BUFFER
	26	select IIO_TRIGGERED_BUFFER
	27	help
21be26fc MM	28	Say yes here to build support for Asahi Kasei AK8974, AMI305 or
21be26fc MM	29	AMI306 I2C-based 3-axis magnetometer chips.
7c94a8b2 LW	30
	31	To compile this driver as a module, choose M here: the module
	32	will be called ak8974.
	33
2fc72cd8	34	config AK8975
7c94a8b2	35	tristate "Asahi Kasei AK8975 3-Axis Magnetometer"
2fc72cd8	36	depends on I2C
84935853	37	depends on GPIOLIB \|\| COMPILE_TEST
bc11ca4a GB	38	select IIO_BUFFER
bc11ca4a GB	39	select IIO_TRIGGERED_BUFFER
2fc72cd8	40	help
57e73a42	41	Say yes here to build support for Asahi Kasei AK8975, AK8963,
76e28aa9	42	AK09911, AK09912 or AK09916 3-Axis Magnetometer.
2fc72cd8 JC	43
	44	To compile this driver as a module, choose M here: the module
	45	will be called ak8975.
	46
d14c0f10 SP	47	config AK09911
d14c0f10 SP	48	tristate "Asahi Kasei AK09911 3-axis Compass"
36086889	49	depends on I2C
84935853	50	depends on GPIOLIB \|\| COMPILE_TEST
57e73a42	51	select AK8975
d14c0f10	52	help
57e73a42	53	Deprecated: AK09911 is now supported by AK8975 driver.
d14c0f10	54
2427d22d	55	config BMC150_MAGN
761b7910	56	tristate
2427d22d HK	57	select IIO_BUFFER
2427d22d HK	58	select IIO_TRIGGERED_BUFFER
2427d22d	59
761b7910 DB	60	config BMC150_MAGN_I2C
	61	tristate "Bosch BMC150 I2C Magnetometer Driver"
	62	depends on I2C
	63	select BMC150_MAGN
	64	select REGMAP_I2C
	65	help
	66	Say yes here to build support for the BMC150 magnetometer with
	67	I2C interface.
2427d22d HK	68
	69	This is a combo module with both accelerometer and magnetometer.
	70	This driver is only implementing magnetometer part, which has
	71	its own address and register map.
	72
0aea7ac8	73	This driver also supports I2C Bosch BMC156 and BMM150 chips.
2427d22d	74	To compile this driver as a module, choose M here: the module will be
761b7910	75	called bmc150_magn_i2c.
2427d22d	76
534536ac DB	77	config BMC150_MAGN_SPI
	78	tristate "Bosch BMC150 SPI Magnetometer Driver"
	79	depends on SPI
	80	select BMC150_MAGN
	81	select REGMAP_SPI
	82	help
	83	Say yes here to build support for the BMC150 magnetometer with
	84	SPI interface.
	85
	86	This is a combo module with both accelerometer and magnetometer.
	87	This driver is only implementing magnetometer part, which has
	88	its own address and register map.
	89
0aea7ac8	90	This driver also supports SPI Bosch BMC156 and BMM150 chips.
534536ac DB	91	To compile this driver as a module, choose M here: the module will be
	92	called bmc150_magn_spi.
	93
39631b5f PM	94	config MAG3110
	95	tristate "Freescale MAG3110 3-Axis Magnetometer"
	96	depends on I2C
50619cb1 PM	97	select IIO_BUFFER
50619cb1 PM	98	select IIO_TRIGGERED_BUFFER
39631b5f PM	99	help
	100	Say yes here to build support for the Freescale MAG3110 3-Axis
	101	magnetometer.
	102
	103	To compile this driver as a module, choose M here: the module
	104	will be called mag3110.
	105
bc1d57ba	106	config HID_SENSOR_MAGNETOMETER_3D
	107	depends on HID_SENSOR_HUB
	108	select IIO_BUFFER
bc1d57ba	109	select HID_SENSOR_IIO_COMMON
9541cc39	110	select HID_SENSOR_IIO_TRIGGER
bc1d57ba	111	tristate "HID Magenetometer 3D"
	112	help
	113	Say yes here to build support for the HID SENSOR
	114	Magnetometer 3D.
	115
abeb6b1e DB	116	config MMC35240
	117	tristate "MEMSIC MMC35240 3-axis magnetic sensor"
	118	select REGMAP_I2C
	119	depends on I2C
	120	help
	121	Say yes here to build support for the MEMSIC MMC35240 3-axis
	122	magnetic sensor.
	123
	124	To compile this driver as a module, choose M here: the module
	125	will be called mmc35240.
	126
872e79ad DC	127	config IIO_ST_MAGN_3AXIS
	128	tristate "STMicroelectronics magnetometers 3-Axis Driver"
	129	depends on (I2C \|\| SPI_MASTER) && SYSFS
	130	select IIO_ST_SENSORS_CORE
872e79ad	131	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
872e79ad DC	132	help
872e79ad DC	133	Say yes here to build support for STMicroelectronics magnetometers:
721a2a7e	134	LSM303C, LSM303DLHC, LSM303DLM, LIS3MDL.
872e79ad	135
26b2ec2e NY	136	Also need to enable at least one of I2C and SPI interface drivers
26b2ec2e NY	137	below.
872e79ad DC	138
872e79ad DC	139	config IIO_ST_MAGN_I2C_3AXIS
26b2ec2e NY	140	tristate "STMicroelectronics magnetometers 3-Axis I2C Interface"
	141	depends on I2C && IIO_ST_MAGN_3AXIS
	142	default I2C && IIO_ST_MAGN_3AXIS
	143	select IIO_ST_SENSORS_I2C
	144	help
	145	Build support for STMicroelectronics magnetometers I2C interface.
	146
	147	To compile this driver as a module, choose M here. The module
	148	will be called st_magn_i2c.
872e79ad DC	149
872e79ad DC	150	config IIO_ST_MAGN_SPI_3AXIS
26b2ec2e NY	151	tristate "STMicroelectronics magnetometers 3-Axis SPI Interface"
	152	depends on SPI_MASTER && IIO_ST_MAGN_3AXIS
	153	default SPI_MASTER && IIO_ST_MAGN_3AXIS
	154	select IIO_ST_SENSORS_SPI
	155	help
	156	Build support for STMicroelectronics magnetometers SPI interface.
	157
	158	To compile this driver as a module, choose M here. The module
	159	will be called st_magn_spi.
872e79ad	160
7247645f CM	161	config SENSORS_HMC5843
	162	tristate
	163	select IIO_BUFFER
	164	select IIO_TRIGGERED_BUFFER
	165
	166	config SENSORS_HMC5843_I2C
	167	tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)"
	168	depends on I2C
	169	select SENSORS_HMC5843
	170	select REGMAP_I2C
	171	help
	172	Say Y here to add support for the Honeywell HMC5843, HMC5883 and
	173	HMC5883L 3-Axis Magnetometer (digital compass).
	174
	175	This driver can also be compiled as a set of modules.
	176	If so, these modules will be created:
	177	- hmc5843_core (core functions)
	178	- hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983)
	179
	180	config SENSORS_HMC5843_SPI
	181	tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)"
	182	depends on SPI_MASTER
	183	select SENSORS_HMC5843
	184	select REGMAP_SPI
	185	help
	186	Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer
	187	(digital compass).
	188
	189	This driver can also be compiled as a set of modules.
	190	If so, these modules will be created:
	191	- hmc5843_core (core functions)
	192	- hmc5843_spi (support for HMC5983)
	193
121354b2 SQ	194	config SENSORS_RM3100
	195	tristate
	196	select IIO_BUFFER
	197	select IIO_TRIGGERED_BUFFER
	198
	199	config SENSORS_RM3100_I2C
	200	tristate "PNI RM3100 3-Axis Magnetometer (I2C)"
	201	depends on I2C
	202	select SENSORS_RM3100
	203	select REGMAP_I2C
	204	help
	205	Say Y here to add support for the PNI RM3100 3-Axis Magnetometer.
	206
	207	This driver can also be compiled as a module.
	208	To compile this driver as a module, choose M here: the module
	209	will be called rm3100-i2c.
	210
	211	config SENSORS_RM3100_SPI
	212	tristate "PNI RM3100 3-Axis Magnetometer (SPI)"
	213	depends on SPI_MASTER
	214	select SENSORS_RM3100
	215	select REGMAP_SPI
	216	help
	217	Say Y here to add support for the PNI RM3100 3-Axis Magnetometer.
	218
	219	This driver can also be compiled as a module.
	220	To compile this driver as a module, choose M here: the module
	221	will be called rm3100-spi.
	222
866a1389 GL	223	config TI_TMAG5273
	224	tristate "TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor"
	225	depends on I2C
	226	select REGMAP_I2C
	227	help
	228	Say Y here to add support for the TI TMAG5273 Low-Power
	229	Linear 3D Hall-Effect Sensor.
	230
	231	This driver can also be compiled as a module.
	232	To compile this driver as a module, choose M here: the module
	233	will be called tmag5273.
	234
de8860b1 LW	235	config YAMAHA_YAS530
	236	tristate "Yamaha YAS530 family of 3-Axis Magnetometers (I2C)"
	237	depends on I2C
	238	select REGMAP_I2C
	239	select IIO_BUFFER
	240	select IIO_TRIGGERED_BUFFER
	241	help
	242	Say Y here to add support for the Yamaha YAS530 series of
65f79b50 JH	243	3-Axis Magnetometers. YAS530, YAS532, YAS533 and YAS537 are
65f79b50 JH	244	supported.
de8860b1 LW	245
	246	This driver can also be compiled as a module.
	247	To compile this driver as a module, choose M here: the module
	248	will be called yamaha-yas.
	249
bc1d57ba	250	endmenu