[linux-2.6-block.git] / drivers / iio / light / Kconfig

#
# Light sensors
#
# When adding new entries keep the list in alphabetical order

menu "Light sensors"

config ACPI_ALS
	tristate "ACPI Ambient Light Sensor"
	depends on ACPI
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	select IIO_KFIFO_BUF
	help
	 Say Y here if you want to build a driver for the ACPI0008
	 Ambient Light Sensor.

	 To compile this driver as a module, choose M here: the module will
	 be called acpi-als.

config ADJD_S311
	tristate "ADJD-S311-CR999 digital color sensor"
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	depends on I2C
	help
	 If you say yes here you get support for the Avago ADJD-S311-CR999
	 digital color light sensor.

	 This driver can also be built as a module.  If so, the module
	 will be called adjd_s311.

config AL3320A
	tristate "AL3320A ambient light sensor"
	depends on I2C
	help
	 Say Y here if you want to build a driver for the Dyna Image AL3320A
	 ambient light sensor.

	 To compile this driver as a module, choose M here: the
	 module will be called al3320a.

config APDS9300
	tristate "APDS9300 ambient light sensor"
	depends on I2C
	help
	 Say Y here if you want to build a driver for the Avago APDS9300
	 ambient light sensor.

	 To compile this driver as a module, choose M here: the
	 module will be called apds9300.

config BH1750
	tristate "ROHM BH1750 ambient light sensor"
	depends on I2C
	help
	 Say Y here to build support for the ROHM BH1710, BH1715, BH1721,
	 BH1750, BH1751 ambient light sensors.

	 To compile this driver as a module, choose M here: the module will
	 be called bh1750.

config CM32181
	depends on I2C
	tristate "CM32181 driver"
	help
	 Say Y here if you use cm32181.
	 This option enables ambient light sensor using
	 Capella cm32181 device driver.

	 To compile this driver as a module, choose M here:
	 the module will be called cm32181.

config CM3232
	depends on I2C
	tristate "CM3232 ambient light sensor"
	help
	 Say Y here if you use cm3232.
	 This option enables ambient light sensor using
	 Capella Microsystems cm3232 device driver.

	 To compile this driver as a module, choose M here:
	 the module will be called cm3232.

config CM3323
	depends on I2C
	tristate "Capella CM3323 color light sensor"
	help
	 Say Y here if you want to build a driver for Capela CM3323
	 color sensor.

	 To compile this driver as a module, choose M here: the module will
	 be called cm3323.

config CM36651
	depends on I2C
	tristate "CM36651 driver"
	help
	 Say Y here if you use cm36651.
	 This option enables proximity & RGB sensor using
	 Capella cm36651 device driver.

	 To compile this driver as a module, choose M here:
	 the module will be called cm36651.

config GP2AP020A00F
	tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
	depends on I2C
	select REGMAP_I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	select IRQ_WORK
	help
	  Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip
	  hooked to an I2C bus.

	  To compile this driver as a module, choose M here: the
	  module will be called gp2ap020a00f.

config ISL29125
	tristate "Intersil ISL29125 digital color light sensor"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	  Say Y here if you want to build a driver for the Intersil ISL29125
	  RGB light sensor for I2C.

	  To compile this driver as a module, choose M here: the module will be
	  called isl29125.

config HID_SENSOR_ALS
	depends on HID_SENSOR_HUB
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	select HID_SENSOR_IIO_COMMON
	select HID_SENSOR_IIO_TRIGGER
	tristate "HID ALS"
	help
	  Say yes here to build support for the HID SENSOR
	  Ambient light sensor.

	  To compile this driver as a module, choose M here: the
	  module will be called hid-sensor-als.

config HID_SENSOR_PROX
	depends on HID_SENSOR_HUB
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	select HID_SENSOR_IIO_COMMON
	select HID_SENSOR_IIO_TRIGGER
	tristate "HID PROX"
	help
	  Say yes here to build support for the HID SENSOR
	  Proximity sensor.

	  To compile this driver as a module, choose M here: the
	  module will be called hid-sensor-prox.

config JSA1212
	tristate "JSA1212 ALS and proximity sensor driver"
	depends on I2C
	select REGMAP_I2C
	help
	 Say Y here if you want to build a IIO driver for JSA1212
	 proximity & ALS sensor device.

	 To compile this driver as a module, choose M here:
	 the module will be called jsa1212.

config SENSORS_LM3533
	tristate "LM3533 ambient light sensor"
	depends on MFD_LM3533
	help
	  If you say yes here you get support for the ambient light sensor
	  interface on National Semiconductor / TI LM3533 Lighting Power
	  chips.

	  The sensor interface can be used to control the LEDs and backlights
	  of the chip through defining five light zones and three sets of
	  corresponding output-current values.

	  The driver provides raw and mean adc readings along with the current
	  light zone through sysfs. A threshold event can be generated on zone
	  changes. The ALS-control output values can be set per zone for the
	  three current output channels.

config LTR501
	tristate "LTR-501ALS-01 light sensor"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	 If you say yes here you get support for the Lite-On LTR-501ALS-01
	 ambient light and proximity sensor. This driver also supports LTR-559
	 ALS/PS or LTR-301 ALS sensors.

	 This driver can also be built as a module.  If so, the module
         will be called ltr501.

config STK3310
	tristate "STK3310 ALS and proximity sensor"
	depends on I2C
	help
	 Say yes here to get support for the Sensortek STK3310 ambient light
	 and proximity sensor. The STK3311 model is also supported by this
	 driver.

	 Choosing M will build the driver as a module. If so, the module
	 will be called stk3310.

config TCS3414
	tristate "TAOS TCS3414 digital color sensor"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	 If you say yes here you get support for the TAOS TCS3414
	 family of digital color sensors.

	 This driver can also be built as a module.  If so, the module
	 will be called tcs3414.

config TCS3472
	tristate "TAOS TCS3472 color light-to-digital converter"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	 If you say yes here you get support for the TAOS TCS3472
	 family of color light-to-digital converters with IR filter.

	 This driver can also be built as a module.  If so, the module
	 will be called tcs3472.

config SENSORS_TSL2563
	tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
	depends on I2C
	help
	 If you say yes here you get support for the Taos TSL2560,
	 TSL2561, TSL2562 and TSL2563 ambient light sensors.

	 This driver can also be built as a module.  If so, the module
	 will be called tsl2563.

config TSL4531
	tristate "TAOS TSL4531 ambient light sensors"
	depends on I2C
	help
	 Say Y here if you want to build a driver for the TAOS TSL4531 family
	 of ambient light sensors with direct lux output.

	 To compile this driver as a module, choose M here: the
	 module will be called tsl4531.

config VCNL4000
	tristate "VCNL4000 combined ALS and proximity sensor"
	depends on I2C
	help
	 Say Y here if you want to build a driver for the Vishay VCNL4000
	 combined ambient light and proximity sensor.

	 To compile this driver as a module, choose M here: the
	 module will be called vcnl4000.

endmenu
Commit	Line	Data
9c8ea1b2 JH	1	#
	2	# Light sensors
	3	#
3edc84e6 LPC	4	# When adding new entries keep the list in alphabetical order
3edc84e6 LPC	5
9c8ea1b2 JH	6	menu "Light sensors"
9c8ea1b2 JH	7
feca56ff GM	8	config ACPI_ALS
	9	tristate "ACPI Ambient Light Sensor"
	10	depends on ACPI
	11	select IIO_BUFFER
	12	select IIO_TRIGGERED_BUFFER
	13	select IIO_KFIFO_BUF
	14	help
	15	Say Y here if you want to build a driver for the ACPI0008
	16	Ambient Light Sensor.
	17
	18	To compile this driver as a module, choose M here: the module will
	19	be called acpi-als.
	20
bbdb822c PM	21	config ADJD_S311
	22	tristate "ADJD-S311-CR999 digital color sensor"
	23	select IIO_BUFFER
	24	select IIO_TRIGGERED_BUFFER
	25	depends on I2C
	26	help
	27	If you say yes here you get support for the Avago ADJD-S311-CR999
	28	digital color light sensor.
	29
	30	This driver can also be built as a module. If so, the module
	31	will be called adjd_s311.
	32
f007d7f1 DB	33	config AL3320A
	34	tristate "AL3320A ambient light sensor"
	35	depends on I2C
	36	help
	37	Say Y here if you want to build a driver for the Dyna Image AL3320A
	38	ambient light sensor.
	39
	40	To compile this driver as a module, choose M here: the
	41	module will be called al3320a.
	42
03eff7b6 OK	43	config APDS9300
	44	tristate "APDS9300 ambient light sensor"
	45	depends on I2C
	46	help
	47	Say Y here if you want to build a driver for the Avago APDS9300
	48	ambient light sensor.
	49
	50	To compile this driver as a module, choose M here: the
	51	module will be called apds9300.
	52
3a11fbb0 TD	53	config BH1750
	54	tristate "ROHM BH1750 ambient light sensor"
	55	depends on I2C
	56	help
	57	Say Y here to build support for the ROHM BH1710, BH1715, BH1721,
	58	BH1750, BH1751 ambient light sensors.
	59
	60	To compile this driver as a module, choose M here: the module will
	61	be called bh1750.
	62
971672c0 KT	63	config CM32181
	64	depends on I2C
	65	tristate "CM32181 driver"
	66	help
	67	Say Y here if you use cm32181.
	68	This option enables ambient light sensor using
	69	Capella cm32181 device driver.
	70
	71	To compile this driver as a module, choose M here:
	72	the module will be called cm32181.
	73
b84894c7 KT	74	config CM3232
	75	depends on I2C
	76	tristate "CM3232 ambient light sensor"
	77	help
	78	Say Y here if you use cm3232.
	79	This option enables ambient light sensor using
	80	Capella Microsystems cm3232 device driver.
	81
	82	To compile this driver as a module, choose M here:
	83	the module will be called cm3232.
	84
8b054426 DB	85	config CM3323
	86	depends on I2C
	87	tristate "Capella CM3323 color light sensor"
	88	help
	89	Say Y here if you want to build a driver for Capela CM3323
	90	color sensor.
	91
	92	To compile this driver as a module, choose M here: the module will
	93	be called cm3323.
	94
e590d451 BS	95	config CM36651
	96	depends on I2C
	97	tristate "CM36651 driver"
	98	help
	99	Say Y here if you use cm36651.
	100	This option enables proximity & RGB sensor using
	101	Capella cm36651 device driver.
	102
	103	To compile this driver as a module, choose M here:
	104	the module will be called cm36651.
	105
bf29fbea JA	106	config GP2AP020A00F
	107	tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
	108	depends on I2C
8c3b3efb	109	select REGMAP_I2C
bf29fbea JA	110	select IIO_BUFFER
bf29fbea JA	111	select IIO_TRIGGERED_BUFFER
419a4aae	112	select IRQ_WORK
bf29fbea JA	113	help
	114	Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip
	115	hooked to an I2C bus.
	116
	117	To compile this driver as a module, choose M here: the
	118	module will be called gp2ap020a00f.
	119
6c25539c PM	120	config ISL29125
	121	tristate "Intersil ISL29125 digital color light sensor"
	122	depends on I2C
	123	select IIO_BUFFER
	124	select IIO_TRIGGERED_BUFFER
	125	help
	126	Say Y here if you want to build a driver for the Intersil ISL29125
	127	RGB light sensor for I2C.
	128
	129	To compile this driver as a module, choose M here: the module will be
	130	called isl29125.
	131
3edc84e6 LPC	132	config HID_SENSOR_ALS
	133	depends on HID_SENSOR_HUB
	134	select IIO_BUFFER
	135	select IIO_TRIGGERED_BUFFER
	136	select HID_SENSOR_IIO_COMMON
	137	select HID_SENSOR_IIO_TRIGGER
	138	tristate "HID ALS"
	139	help
	140	Say yes here to build support for the HID SENSOR
	141	Ambient light sensor.
	142
4f51c9ad RD	143	To compile this driver as a module, choose M here: the
	144	module will be called hid-sensor-als.
	145
39a3a013 AP	146	config HID_SENSOR_PROX
	147	depends on HID_SENSOR_HUB
	148	select IIO_BUFFER
	149	select IIO_TRIGGERED_BUFFER
	150	select HID_SENSOR_IIO_COMMON
	151	select HID_SENSOR_IIO_TRIGGER
	152	tristate "HID PROX"
	153	help
	154	Say yes here to build support for the HID SENSOR
	155	Proximity sensor.
	156
	157	To compile this driver as a module, choose M here: the
	158	module will be called hid-sensor-prox.
	159
995863cc KS	160	config JSA1212
	161	tristate "JSA1212 ALS and proximity sensor driver"
	162	depends on I2C
49e19d5f	163	select REGMAP_I2C
995863cc KS	164	help
	165	Say Y here if you want to build a IIO driver for JSA1212
	166	proximity & ALS sensor device.
	167
	168	To compile this driver as a module, choose M here:
	169	the module will be called jsa1212.
	170
9c8ea1b2 JH	171	config SENSORS_LM3533
	172	tristate "LM3533 ambient light sensor"
	173	depends on MFD_LM3533
	174	help
	175	If you say yes here you get support for the ambient light sensor
	176	interface on National Semiconductor / TI LM3533 Lighting Power
	177	chips.
	178
	179	The sensor interface can be used to control the LEDs and backlights
	180	of the chip through defining five light zones and three sets of
	181	corresponding output-current values.
	182
	183	The driver provides raw and mean adc readings along with the current
	184	light zone through sysfs. A threshold event can be generated on zone
	185	changes. The ALS-control output values can be set per zone for the
	186	three current output channels.
62a1efb9	187
2690be90 PM	188	config LTR501
	189	tristate "LTR-501ALS-01 light sensor"
	190	depends on I2C
	191	select IIO_BUFFER
	192	select IIO_TRIGGERED_BUFFER
	193	help
	194	If you say yes here you get support for the Lite-On LTR-501ALS-01
8592a7ee	195	ambient light and proximity sensor. This driver also supports LTR-559
035ebb15	196	ALS/PS or LTR-301 ALS sensors.
2690be90 PM	197
	198	This driver can also be built as a module. If so, the module
	199	will be called ltr501.
	200
be9e6229 TB	201	config STK3310
	202	tristate "STK3310 ALS and proximity sensor"
	203	depends on I2C
	204	help
	205	Say yes here to get support for the Sensortek STK3310 ambient light
	206	and proximity sensor. The STK3311 model is also supported by this
	207	driver.
	208
	209	Choosing M will build the driver as a module. If so, the module
	210	will be called stk3310.
	211
a244e7b5 PM	212	config TCS3414
	213	tristate "TAOS TCS3414 digital color sensor"
	214	depends on I2C
	215	select IIO_BUFFER
	216	select IIO_TRIGGERED_BUFFER
	217	help
	218	If you say yes here you get support for the TAOS TCS3414
	219	family of digital color sensors.
	220
	221	This driver can also be built as a module. If so, the module
	222	will be called tcs3414.
	223
eb869ade PM	224	config TCS3472
	225	tristate "TAOS TCS3472 color light-to-digital converter"
	226	depends on I2C
089b54bd PM	227	select IIO_BUFFER
089b54bd PM	228	select IIO_TRIGGERED_BUFFER
eb869ade PM	229	help
	230	If you say yes here you get support for the TAOS TCS3472
	231	family of color light-to-digital converters with IR filter.
	232
	233	This driver can also be built as a module. If so, the module
	234	will be called tcs3472.
	235
9c2251dd JC	236	config SENSORS_TSL2563
	237	tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
	238	depends on I2C
	239	help
	240	If you say yes here you get support for the Taos TSL2560,
	241	TSL2561, TSL2562 and TSL2563 ambient light sensors.
	242
	243	This driver can also be built as a module. If so, the module
	244	will be called tsl2563.
	245
aab9ba7e PM	246	config TSL4531
	247	tristate "TAOS TSL4531 ambient light sensors"
	248	depends on I2C
	249	help
	250	Say Y here if you want to build a driver for the TAOS TSL4531 family
	251	of ambient light sensors with direct lux output.
	252
	253	To compile this driver as a module, choose M here: the
	254	module will be called tsl4531.
	255
62a1efb9 PM	256	config VCNL4000
	257	tristate "VCNL4000 combined ALS and proximity sensor"
	258	depends on I2C
	259	help
	260	Say Y here if you want to build a driver for the Vishay VCNL4000
	261	combined ambient light and proximity sensor.
	262
	263	To compile this driver as a module, choose M here: the
	264	module will be called vcnl4000.
	265
9c8ea1b2	266	endmenu