[linux-2.6-block.git] / drivers / hwmon / g760a.c

/*
 * g760a - Driver for the Global Mixed-mode Technology Inc. G760A
 *	   fan speed PWM controller chip
 *
 * Copyright (C) 2007  Herbert Valerio Riedel <hvr@gnu.org>
 *
 * Complete datasheet is available at GMT's website:
 * http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>

enum g760a_regs {
	G760A_REG_SET_CNT = 0x00,
	G760A_REG_ACT_CNT = 0x01,
	G760A_REG_FAN_STA = 0x02
};

#define G760A_REG_FAN_STA_RPM_OFF 0x1 /* +/-20% off */
#define G760A_REG_FAN_STA_RPM_LOW 0x2 /* below 1920rpm */

/* register data is read (and cached) at most once per second */
#define G760A_UPDATE_INTERVAL (HZ)

struct g760a_data {
	struct i2c_client *client;
	struct mutex update_lock;

	/* board specific parameters */
	u32 clk; /* default 32kHz */
	u16 fan_div; /* default P=2 */

	/* g760a register cache */
	unsigned int valid:1;
	unsigned long last_updated; /* In jiffies */

	u8 set_cnt; /* PWM (period) count number; 0xff stops fan */
	u8 act_cnt; /*   formula: cnt = (CLK * 30)/(rpm * P) */
	u8 fan_sta; /* bit 0: set when actual fan speed more than 20%
		     *   outside requested fan speed
		     * bit 1: set when fan speed below 1920 rpm
		     */
};

#define G760A_DEFAULT_CLK 32768
#define G760A_DEFAULT_FAN_DIV 2

#define PWM_FROM_CNT(cnt)	(0xff-(cnt))
#define PWM_TO_CNT(pwm)		(0xff-(pwm))

static inline unsigned int rpm_from_cnt(u8 val, u32 clk, u16 div)
{
	return ((val == 0x00) ? 0 : ((clk*30)/(val*div)));
}

/* read/write wrappers */
static int g760a_read_value(struct i2c_client *client, enum g760a_regs reg)
{
	return i2c_smbus_read_byte_data(client, reg);
}

static int g760a_write_value(struct i2c_client *client, enum g760a_regs reg,
			     u16 value)
{
	return i2c_smbus_write_byte_data(client, reg, value);
}

/*
 * sysfs attributes
 */

static struct g760a_data *g760a_update_client(struct device *dev)
{
	struct g760a_data *data = dev_get_drvdata(dev);
	struct i2c_client *client = data->client;

	mutex_lock(&data->update_lock);

	if (time_after(jiffies, data->last_updated + G760A_UPDATE_INTERVAL)
	    || !data->valid) {
		dev_dbg(&client->dev, "Starting g760a update\n");

		data->set_cnt = g760a_read_value(client, G760A_REG_SET_CNT);
		data->act_cnt = g760a_read_value(client, G760A_REG_ACT_CNT);
		data->fan_sta = g760a_read_value(client, G760A_REG_FAN_STA);

		data->last_updated = jiffies;
		data->valid = 1;
	}

	mutex_unlock(&data->update_lock);

	return data;
}

static ssize_t show_fan(struct device *dev, struct device_attribute *da,
			char *buf)
{
	struct g760a_data *data = g760a_update_client(dev);
	unsigned int rpm = 0;

	mutex_lock(&data->update_lock);
	if (!(data->fan_sta & G760A_REG_FAN_STA_RPM_LOW))
		rpm = rpm_from_cnt(data->act_cnt, data->clk, data->fan_div);
	mutex_unlock(&data->update_lock);

	return sprintf(buf, "%d\n", rpm);
}

static ssize_t show_fan_alarm(struct device *dev, struct device_attribute *da,
			      char *buf)
{
	struct g760a_data *data = g760a_update_client(dev);

	int fan_alarm = (data->fan_sta & G760A_REG_FAN_STA_RPM_OFF) ? 1 : 0;

	return sprintf(buf, "%d\n", fan_alarm);
}

static ssize_t get_pwm(struct device *dev, struct device_attribute *da,
		       char *buf)
{
	struct g760a_data *data = g760a_update_client(dev);

	return sprintf(buf, "%d\n", PWM_FROM_CNT(data->set_cnt));
}

static ssize_t set_pwm(struct device *dev, struct device_attribute *da,
		       const char *buf, size_t count)
{
	struct g760a_data *data = g760a_update_client(dev);
	struct i2c_client *client = data->client;
	unsigned long val;

	if (kstrtoul(buf, 10, &val))
		return -EINVAL;

	mutex_lock(&data->update_lock);
	data->set_cnt = PWM_TO_CNT(clamp_val(val, 0, 255));
	g760a_write_value(client, G760A_REG_SET_CNT, data->set_cnt);
	mutex_unlock(&data->update_lock);

	return count;
}

static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, get_pwm, set_pwm);
static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL);
static DEVICE_ATTR(fan1_alarm, S_IRUGO, show_fan_alarm, NULL);

static struct attribute *g760a_attrs[] = {
	&dev_attr_pwm1.attr,
	&dev_attr_fan1_input.attr,
	&dev_attr_fan1_alarm.attr,
	NULL
};

ATTRIBUTE_GROUPS(g760a);

/*
 * new-style driver model code
 */

static int g760a_probe(struct i2c_client *client,
			const struct i2c_device_id *id)
{
	struct device *dev = &client->dev;
	struct g760a_data *data;
	struct device *hwmon_dev;

	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
		return -EIO;

	data = devm_kzalloc(dev, sizeof(struct g760a_data), GFP_KERNEL);
	if (!data)
		return -ENOMEM;

	data->client = client;
	mutex_init(&data->update_lock);

	/* setup default configuration for now */
	data->fan_div = G760A_DEFAULT_FAN_DIV;
	data->clk = G760A_DEFAULT_CLK;

	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
							   data,
							   g760a_groups);
	return PTR_ERR_OR_ZERO(hwmon_dev);
}

static const struct i2c_device_id g760a_id[] = {
	{ "g760a", 0 },
	{ }
};
MODULE_DEVICE_TABLE(i2c, g760a_id);

static struct i2c_driver g760a_driver = {
	.driver = {
		.name	= "g760a",
	},
	.probe	  = g760a_probe,
	.id_table = g760a_id,
};

module_i2c_driver(g760a_driver);

MODULE_AUTHOR("Herbert Valerio Riedel <hvr@gnu.org>");
MODULE_DESCRIPTION("GMT G760A driver");
MODULE_LICENSE("GPL");
Commit	Line	Data
3bcfa9e4	1	/*
1b9c491d GR	2	* g760a - Driver for the Global Mixed-mode Technology Inc. G760A
	3	* fan speed PWM controller chip
	4	*
	5	* Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
	6	*
	7	* Complete datasheet is available at GMT's website:
	8	* http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf
	9	*
	10	* This program is free software; you can redistribute it and/or modify
	11	* it under the terms of the GNU General Public License as published by
	12	* the Free Software Foundation; either version 2 of the License, or
	13	* (at your option) any later version.
	14	*/
3bcfa9e4 HVR	15
	16	#include <linux/module.h>
	17	#include <linux/init.h>
	18	#include <linux/slab.h>
	19	#include <linux/jiffies.h>
	20	#include <linux/i2c.h>
	21	#include <linux/hwmon.h>
	22	#include <linux/hwmon-sysfs.h>
	23	#include <linux/err.h>
	24	#include <linux/mutex.h>
	25	#include <linux/sysfs.h>
	26
3bcfa9e4 HVR	27	enum g760a_regs {
	28	G760A_REG_SET_CNT = 0x00,
	29	G760A_REG_ACT_CNT = 0x01,
	30	G760A_REG_FAN_STA = 0x02
	31	};
	32
	33	#define G760A_REG_FAN_STA_RPM_OFF 0x1 /* +/-20% off */
	34	#define G760A_REG_FAN_STA_RPM_LOW 0x2 /* below 1920rpm */
	35
	36	/* register data is read (and cached) at most once per second */
	37	#define G760A_UPDATE_INTERVAL (HZ)
	38
	39	struct g760a_data {
	40	struct i2c_client *client;
3bcfa9e4 HVR	41	struct mutex update_lock;
	42
	43	/* board specific parameters */
	44	u32 clk; /* default 32kHz */
	45	u16 fan_div; /* default P=2 */
	46
	47	/* g760a register cache */
	48	unsigned int valid:1;
	49	unsigned long last_updated; /* In jiffies */
	50
	51	u8 set_cnt; /* PWM (period) count number; 0xff stops fan */
	52	u8 act_cnt; /* formula: cnt = (CLK * 30)/(rpm * P) */
	53	u8 fan_sta; /* bit 0: set when actual fan speed more than 20%
	54	* outside requested fan speed
1b9c491d GR	55	* bit 1: set when fan speed below 1920 rpm
1b9c491d GR	56	*/
3bcfa9e4 HVR	57	};
	58
	59	#define G760A_DEFAULT_CLK 32768
	60	#define G760A_DEFAULT_FAN_DIV 2
	61
	62	#define PWM_FROM_CNT(cnt) (0xff-(cnt))
	63	#define PWM_TO_CNT(pwm) (0xff-(pwm))
	64
ebec05bd	65	static inline unsigned int rpm_from_cnt(u8 val, u32 clk, u16 div)
3bcfa9e4 HVR	66	{
	67	return ((val == 0x00) ? 0 : ((clk30)/(valdiv)));
	68	}
	69
3bcfa9e4 HVR	70	/* read/write wrappers */
	71	static int g760a_read_value(struct i2c_client *client, enum g760a_regs reg)
	72	{
	73	return i2c_smbus_read_byte_data(client, reg);
	74	}
	75
	76	static int g760a_write_value(struct i2c_client *client, enum g760a_regs reg,
	77	u16 value)
	78	{
	79	return i2c_smbus_write_byte_data(client, reg, value);
	80	}
	81
1b9c491d	82	/*
3bcfa9e4 HVR	83	* sysfs attributes
	84	*/
	85
	86	static struct g760a_data g760a_update_client(struct device dev)
	87	{
e47c39b3 AL	88	struct g760a_data *data = dev_get_drvdata(dev);
e47c39b3 AL	89	struct i2c_client *client = data->client;
3bcfa9e4 HVR	90
	91	mutex_lock(&data->update_lock);
	92
	93	if (time_after(jiffies, data->last_updated + G760A_UPDATE_INTERVAL)
	94	\|\| !data->valid) {
	95	dev_dbg(&client->dev, "Starting g760a update\n");
	96
	97	data->set_cnt = g760a_read_value(client, G760A_REG_SET_CNT);
	98	data->act_cnt = g760a_read_value(client, G760A_REG_ACT_CNT);
	99	data->fan_sta = g760a_read_value(client, G760A_REG_FAN_STA);
	100
	101	data->last_updated = jiffies;
	102	data->valid = 1;
	103	}
	104
	105	mutex_unlock(&data->update_lock);
	106
	107	return data;
	108	}
	109
	110	static ssize_t show_fan(struct device dev, struct device_attribute da,
	111	char *buf)
	112	{
	113	struct g760a_data *data = g760a_update_client(dev);
	114	unsigned int rpm = 0;
	115
	116	mutex_lock(&data->update_lock);
	117	if (!(data->fan_sta & G760A_REG_FAN_STA_RPM_LOW))
	118	rpm = rpm_from_cnt(data->act_cnt, data->clk, data->fan_div);
	119	mutex_unlock(&data->update_lock);
	120
	121	return sprintf(buf, "%d\n", rpm);
	122	}
	123
	124	static ssize_t show_fan_alarm(struct device dev, struct device_attribute da,
	125	char *buf)
	126	{
	127	struct g760a_data *data = g760a_update_client(dev);
	128
	129	int fan_alarm = (data->fan_sta & G760A_REG_FAN_STA_RPM_OFF) ? 1 : 0;
	130
	131	return sprintf(buf, "%d\n", fan_alarm);
	132	}
	133
	134	static ssize_t get_pwm(struct device dev, struct device_attribute da,
	135	char *buf)
	136	{
	137	struct g760a_data *data = g760a_update_client(dev);
	138
	139	return sprintf(buf, "%d\n", PWM_FROM_CNT(data->set_cnt));
	140	}
	141
	142	static ssize_t set_pwm(struct device dev, struct device_attribute da,
	143	const char *buf, size_t count)
	144	{
3bcfa9e4	145	struct g760a_data *data = g760a_update_client(dev);
e47c39b3	146	struct i2c_client *client = data->client;
3bcfa9e4 HVR	147	unsigned long val;
3bcfa9e4 HVR	148
179c4fdb	149	if (kstrtoul(buf, 10, &val))
3bcfa9e4 HVR	150	return -EINVAL;
	151
	152	mutex_lock(&data->update_lock);
2a844c14	153	data->set_cnt = PWM_TO_CNT(clamp_val(val, 0, 255));
3bcfa9e4 HVR	154	g760a_write_value(client, G760A_REG_SET_CNT, data->set_cnt);
	155	mutex_unlock(&data->update_lock);
	156
	157	return count;
	158	}
	159
	160	static DEVICE_ATTR(pwm1, S_IWUSR \| S_IRUGO, get_pwm, set_pwm);
	161	static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL);
	162	static DEVICE_ATTR(fan1_alarm, S_IRUGO, show_fan_alarm, NULL);
	163
e47c39b3	164	static struct attribute *g760a_attrs[] = {
3bcfa9e4 HVR	165	&dev_attr_pwm1.attr,
	166	&dev_attr_fan1_input.attr,
	167	&dev_attr_fan1_alarm.attr,
	168	NULL
	169	};
	170
e47c39b3	171	ATTRIBUTE_GROUPS(g760a);
3bcfa9e4	172
1b9c491d	173	/*
3bcfa9e4 HVR	174	* new-style driver model code
	175	*/
	176
	177	static int g760a_probe(struct i2c_client *client,
	178	const struct i2c_device_id *id)
	179	{
e47c39b3	180	struct device *dev = &client->dev;
3bcfa9e4	181	struct g760a_data *data;
e47c39b3	182	struct device *hwmon_dev;
3bcfa9e4	183
e47c39b3	184	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
3bcfa9e4 HVR	185	return -EIO;
3bcfa9e4 HVR	186
e47c39b3	187	data = devm_kzalloc(dev, sizeof(struct g760a_data), GFP_KERNEL);
3bcfa9e4 HVR	188	if (!data)
	189	return -ENOMEM;
	190
3bcfa9e4 HVR	191	data->client = client;
	192	mutex_init(&data->update_lock);
	193
	194	/* setup default configuration for now */
	195	data->fan_div = G760A_DEFAULT_FAN_DIV;
	196	data->clk = G760A_DEFAULT_CLK;
	197
e47c39b3 AL	198	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
	199	data,
	200	g760a_groups);
	201	return PTR_ERR_OR_ZERO(hwmon_dev);
3bcfa9e4 HVR	202	}
3bcfa9e4 HVR	203
15ac4ddb AL	204	static const struct i2c_device_id g760a_id[] = {
	205	{ "g760a", 0 },
	206	{ }
	207	};
	208	MODULE_DEVICE_TABLE(i2c, g760a_id);
	209
	210	static struct i2c_driver g760a_driver = {
	211	.driver = {
	212	.name = "g760a",
	213	},
	214	.probe = g760a_probe,
15ac4ddb AL	215	.id_table = g760a_id,
	216	};
	217
f0967eea	218	module_i2c_driver(g760a_driver);
3bcfa9e4 HVR	219
	220	MODULE_AUTHOR("Herbert Valerio Riedel <hvr@gnu.org>");
	221	MODULE_DESCRIPTION("GMT G760A driver");
	222	MODULE_LICENSE("GPL");