Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * ipmi_si.c | |
3 | * | |
4 | * The interface to the IPMI driver for the system interfaces (KCS, SMIC, | |
5 | * BT). | |
6 | * | |
7 | * Author: MontaVista Software, Inc. | |
8 | * Corey Minyard <minyard@mvista.com> | |
9 | * source@mvista.com | |
10 | * | |
11 | * Copyright 2002 MontaVista Software Inc. | |
12 | * | |
13 | * This program is free software; you can redistribute it and/or modify it | |
14 | * under the terms of the GNU General Public License as published by the | |
15 | * Free Software Foundation; either version 2 of the License, or (at your | |
16 | * option) any later version. | |
17 | * | |
18 | * | |
19 | * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED | |
20 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
21 | * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. | |
22 | * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, | |
23 | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, | |
24 | * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS | |
25 | * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND | |
26 | * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR | |
27 | * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | |
28 | * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
29 | * | |
30 | * You should have received a copy of the GNU General Public License along | |
31 | * with this program; if not, write to the Free Software Foundation, Inc., | |
32 | * 675 Mass Ave, Cambridge, MA 02139, USA. | |
33 | */ | |
34 | ||
35 | /* | |
36 | * This file holds the "policy" for the interface to the SMI state | |
37 | * machine. It does the configuration, handles timers and interrupts, | |
38 | * and drives the real SMI state machine. | |
39 | */ | |
40 | ||
41 | #include <linux/config.h> | |
42 | #include <linux/module.h> | |
43 | #include <linux/moduleparam.h> | |
44 | #include <asm/system.h> | |
45 | #include <linux/sched.h> | |
46 | #include <linux/timer.h> | |
47 | #include <linux/errno.h> | |
48 | #include <linux/spinlock.h> | |
49 | #include <linux/slab.h> | |
50 | #include <linux/delay.h> | |
51 | #include <linux/list.h> | |
52 | #include <linux/pci.h> | |
53 | #include <linux/ioport.h> | |
54 | #include <asm/irq.h> | |
55 | #ifdef CONFIG_HIGH_RES_TIMERS | |
56 | #include <linux/hrtime.h> | |
57 | # if defined(schedule_next_int) | |
58 | /* Old high-res timer code, do translations. */ | |
59 | # define get_arch_cycles(a) quick_update_jiffies_sub(a) | |
60 | # define arch_cycles_per_jiffy cycles_per_jiffies | |
61 | # endif | |
62 | static inline void add_usec_to_timer(struct timer_list *t, long v) | |
63 | { | |
75b0768a CM |
64 | t->arch_cycle_expires += nsec_to_arch_cycle(v * 1000); |
65 | while (t->arch_cycle_expires >= arch_cycles_per_jiffy) | |
1da177e4 LT |
66 | { |
67 | t->expires++; | |
75b0768a | 68 | t->arch_cycle_expires -= arch_cycles_per_jiffy; |
1da177e4 LT |
69 | } |
70 | } | |
71 | #endif | |
72 | #include <linux/interrupt.h> | |
73 | #include <linux/rcupdate.h> | |
74 | #include <linux/ipmi_smi.h> | |
75 | #include <asm/io.h> | |
76 | #include "ipmi_si_sm.h" | |
77 | #include <linux/init.h> | |
b224cd3a | 78 | #include <linux/dmi.h> |
1da177e4 LT |
79 | |
80 | #define IPMI_SI_VERSION "v33" | |
81 | ||
82 | /* Measure times between events in the driver. */ | |
83 | #undef DEBUG_TIMING | |
84 | ||
85 | /* Call every 10 ms. */ | |
86 | #define SI_TIMEOUT_TIME_USEC 10000 | |
87 | #define SI_USEC_PER_JIFFY (1000000/HZ) | |
88 | #define SI_TIMEOUT_JIFFIES (SI_TIMEOUT_TIME_USEC/SI_USEC_PER_JIFFY) | |
89 | #define SI_SHORT_TIMEOUT_USEC 250 /* .25ms when the SM request a | |
90 | short timeout */ | |
91 | ||
92 | enum si_intf_state { | |
93 | SI_NORMAL, | |
94 | SI_GETTING_FLAGS, | |
95 | SI_GETTING_EVENTS, | |
96 | SI_CLEARING_FLAGS, | |
97 | SI_CLEARING_FLAGS_THEN_SET_IRQ, | |
98 | SI_GETTING_MESSAGES, | |
99 | SI_ENABLE_INTERRUPTS1, | |
100 | SI_ENABLE_INTERRUPTS2 | |
101 | /* FIXME - add watchdog stuff. */ | |
102 | }; | |
103 | ||
9dbf68f9 CM |
104 | /* Some BT-specific defines we need here. */ |
105 | #define IPMI_BT_INTMASK_REG 2 | |
106 | #define IPMI_BT_INTMASK_CLEAR_IRQ_BIT 2 | |
107 | #define IPMI_BT_INTMASK_ENABLE_IRQ_BIT 1 | |
108 | ||
1da177e4 LT |
109 | enum si_type { |
110 | SI_KCS, SI_SMIC, SI_BT | |
111 | }; | |
112 | ||
3ae0e0f9 CM |
113 | struct ipmi_device_id { |
114 | unsigned char device_id; | |
115 | unsigned char device_revision; | |
116 | unsigned char firmware_revision_1; | |
117 | unsigned char firmware_revision_2; | |
118 | unsigned char ipmi_version; | |
119 | unsigned char additional_device_support; | |
120 | unsigned char manufacturer_id[3]; | |
121 | unsigned char product_id[2]; | |
122 | unsigned char aux_firmware_revision[4]; | |
123 | } __attribute__((packed)); | |
124 | ||
125 | #define ipmi_version_major(v) ((v)->ipmi_version & 0xf) | |
126 | #define ipmi_version_minor(v) ((v)->ipmi_version >> 4) | |
127 | ||
1da177e4 LT |
128 | struct smi_info |
129 | { | |
130 | ipmi_smi_t intf; | |
131 | struct si_sm_data *si_sm; | |
132 | struct si_sm_handlers *handlers; | |
133 | enum si_type si_type; | |
134 | spinlock_t si_lock; | |
135 | spinlock_t msg_lock; | |
136 | struct list_head xmit_msgs; | |
137 | struct list_head hp_xmit_msgs; | |
138 | struct ipmi_smi_msg *curr_msg; | |
139 | enum si_intf_state si_state; | |
140 | ||
141 | /* Used to handle the various types of I/O that can occur with | |
142 | IPMI */ | |
143 | struct si_sm_io io; | |
144 | int (*io_setup)(struct smi_info *info); | |
145 | void (*io_cleanup)(struct smi_info *info); | |
146 | int (*irq_setup)(struct smi_info *info); | |
147 | void (*irq_cleanup)(struct smi_info *info); | |
148 | unsigned int io_size; | |
149 | ||
3ae0e0f9 CM |
150 | /* Per-OEM handler, called from handle_flags(). |
151 | Returns 1 when handle_flags() needs to be re-run | |
152 | or 0 indicating it set si_state itself. | |
153 | */ | |
154 | int (*oem_data_avail_handler)(struct smi_info *smi_info); | |
155 | ||
1da177e4 LT |
156 | /* Flags from the last GET_MSG_FLAGS command, used when an ATTN |
157 | is set to hold the flags until we are done handling everything | |
158 | from the flags. */ | |
159 | #define RECEIVE_MSG_AVAIL 0x01 | |
160 | #define EVENT_MSG_BUFFER_FULL 0x02 | |
161 | #define WDT_PRE_TIMEOUT_INT 0x08 | |
3ae0e0f9 CM |
162 | #define OEM0_DATA_AVAIL 0x20 |
163 | #define OEM1_DATA_AVAIL 0x40 | |
164 | #define OEM2_DATA_AVAIL 0x80 | |
165 | #define OEM_DATA_AVAIL (OEM0_DATA_AVAIL | \ | |
166 | OEM1_DATA_AVAIL | \ | |
167 | OEM2_DATA_AVAIL) | |
1da177e4 LT |
168 | unsigned char msg_flags; |
169 | ||
170 | /* If set to true, this will request events the next time the | |
171 | state machine is idle. */ | |
172 | atomic_t req_events; | |
173 | ||
174 | /* If true, run the state machine to completion on every send | |
175 | call. Generally used after a panic to make sure stuff goes | |
176 | out. */ | |
177 | int run_to_completion; | |
178 | ||
179 | /* The I/O port of an SI interface. */ | |
180 | int port; | |
181 | ||
182 | /* The space between start addresses of the two ports. For | |
183 | instance, if the first port is 0xca2 and the spacing is 4, then | |
184 | the second port is 0xca6. */ | |
185 | unsigned int spacing; | |
186 | ||
187 | /* zero if no irq; */ | |
188 | int irq; | |
189 | ||
190 | /* The timer for this si. */ | |
191 | struct timer_list si_timer; | |
192 | ||
193 | /* The time (in jiffies) the last timeout occurred at. */ | |
194 | unsigned long last_timeout_jiffies; | |
195 | ||
196 | /* Used to gracefully stop the timer without race conditions. */ | |
197 | volatile int stop_operation; | |
198 | volatile int timer_stopped; | |
199 | ||
200 | /* The driver will disable interrupts when it gets into a | |
201 | situation where it cannot handle messages due to lack of | |
202 | memory. Once that situation clears up, it will re-enable | |
203 | interrupts. */ | |
204 | int interrupt_disabled; | |
205 | ||
3ae0e0f9 | 206 | struct ipmi_device_id device_id; |
1da177e4 LT |
207 | |
208 | /* Slave address, could be reported from DMI. */ | |
209 | unsigned char slave_addr; | |
210 | ||
211 | /* Counters and things for the proc filesystem. */ | |
212 | spinlock_t count_lock; | |
213 | unsigned long short_timeouts; | |
214 | unsigned long long_timeouts; | |
215 | unsigned long timeout_restarts; | |
216 | unsigned long idles; | |
217 | unsigned long interrupts; | |
218 | unsigned long attentions; | |
219 | unsigned long flag_fetches; | |
220 | unsigned long hosed_count; | |
221 | unsigned long complete_transactions; | |
222 | unsigned long events; | |
223 | unsigned long watchdog_pretimeouts; | |
224 | unsigned long incoming_messages; | |
225 | }; | |
226 | ||
227 | static void si_restart_short_timer(struct smi_info *smi_info); | |
228 | ||
229 | static void deliver_recv_msg(struct smi_info *smi_info, | |
230 | struct ipmi_smi_msg *msg) | |
231 | { | |
232 | /* Deliver the message to the upper layer with the lock | |
233 | released. */ | |
234 | spin_unlock(&(smi_info->si_lock)); | |
235 | ipmi_smi_msg_received(smi_info->intf, msg); | |
236 | spin_lock(&(smi_info->si_lock)); | |
237 | } | |
238 | ||
239 | static void return_hosed_msg(struct smi_info *smi_info) | |
240 | { | |
241 | struct ipmi_smi_msg *msg = smi_info->curr_msg; | |
242 | ||
243 | /* Make it a reponse */ | |
244 | msg->rsp[0] = msg->data[0] | 4; | |
245 | msg->rsp[1] = msg->data[1]; | |
246 | msg->rsp[2] = 0xFF; /* Unknown error. */ | |
247 | msg->rsp_size = 3; | |
248 | ||
249 | smi_info->curr_msg = NULL; | |
250 | deliver_recv_msg(smi_info, msg); | |
251 | } | |
252 | ||
253 | static enum si_sm_result start_next_msg(struct smi_info *smi_info) | |
254 | { | |
255 | int rv; | |
256 | struct list_head *entry = NULL; | |
257 | #ifdef DEBUG_TIMING | |
258 | struct timeval t; | |
259 | #endif | |
260 | ||
261 | /* No need to save flags, we aleady have interrupts off and we | |
262 | already hold the SMI lock. */ | |
263 | spin_lock(&(smi_info->msg_lock)); | |
264 | ||
265 | /* Pick the high priority queue first. */ | |
266 | if (! list_empty(&(smi_info->hp_xmit_msgs))) { | |
267 | entry = smi_info->hp_xmit_msgs.next; | |
268 | } else if (! list_empty(&(smi_info->xmit_msgs))) { | |
269 | entry = smi_info->xmit_msgs.next; | |
270 | } | |
271 | ||
272 | if (!entry) { | |
273 | smi_info->curr_msg = NULL; | |
274 | rv = SI_SM_IDLE; | |
275 | } else { | |
276 | int err; | |
277 | ||
278 | list_del(entry); | |
279 | smi_info->curr_msg = list_entry(entry, | |
280 | struct ipmi_smi_msg, | |
281 | link); | |
282 | #ifdef DEBUG_TIMING | |
283 | do_gettimeofday(&t); | |
284 | printk("**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec); | |
285 | #endif | |
286 | err = smi_info->handlers->start_transaction( | |
287 | smi_info->si_sm, | |
288 | smi_info->curr_msg->data, | |
289 | smi_info->curr_msg->data_size); | |
290 | if (err) { | |
291 | return_hosed_msg(smi_info); | |
292 | } | |
293 | ||
294 | rv = SI_SM_CALL_WITHOUT_DELAY; | |
295 | } | |
296 | spin_unlock(&(smi_info->msg_lock)); | |
297 | ||
298 | return rv; | |
299 | } | |
300 | ||
301 | static void start_enable_irq(struct smi_info *smi_info) | |
302 | { | |
303 | unsigned char msg[2]; | |
304 | ||
305 | /* If we are enabling interrupts, we have to tell the | |
306 | BMC to use them. */ | |
307 | msg[0] = (IPMI_NETFN_APP_REQUEST << 2); | |
308 | msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD; | |
309 | ||
310 | smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2); | |
311 | smi_info->si_state = SI_ENABLE_INTERRUPTS1; | |
312 | } | |
313 | ||
314 | static void start_clear_flags(struct smi_info *smi_info) | |
315 | { | |
316 | unsigned char msg[3]; | |
317 | ||
318 | /* Make sure the watchdog pre-timeout flag is not set at startup. */ | |
319 | msg[0] = (IPMI_NETFN_APP_REQUEST << 2); | |
320 | msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD; | |
321 | msg[2] = WDT_PRE_TIMEOUT_INT; | |
322 | ||
323 | smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3); | |
324 | smi_info->si_state = SI_CLEARING_FLAGS; | |
325 | } | |
326 | ||
327 | /* When we have a situtaion where we run out of memory and cannot | |
328 | allocate messages, we just leave them in the BMC and run the system | |
329 | polled until we can allocate some memory. Once we have some | |
330 | memory, we will re-enable the interrupt. */ | |
331 | static inline void disable_si_irq(struct smi_info *smi_info) | |
332 | { | |
333 | if ((smi_info->irq) && (!smi_info->interrupt_disabled)) { | |
334 | disable_irq_nosync(smi_info->irq); | |
335 | smi_info->interrupt_disabled = 1; | |
336 | } | |
337 | } | |
338 | ||
339 | static inline void enable_si_irq(struct smi_info *smi_info) | |
340 | { | |
341 | if ((smi_info->irq) && (smi_info->interrupt_disabled)) { | |
342 | enable_irq(smi_info->irq); | |
343 | smi_info->interrupt_disabled = 0; | |
344 | } | |
345 | } | |
346 | ||
347 | static void handle_flags(struct smi_info *smi_info) | |
348 | { | |
3ae0e0f9 | 349 | retry: |
1da177e4 LT |
350 | if (smi_info->msg_flags & WDT_PRE_TIMEOUT_INT) { |
351 | /* Watchdog pre-timeout */ | |
352 | spin_lock(&smi_info->count_lock); | |
353 | smi_info->watchdog_pretimeouts++; | |
354 | spin_unlock(&smi_info->count_lock); | |
355 | ||
356 | start_clear_flags(smi_info); | |
357 | smi_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT; | |
358 | spin_unlock(&(smi_info->si_lock)); | |
359 | ipmi_smi_watchdog_pretimeout(smi_info->intf); | |
360 | spin_lock(&(smi_info->si_lock)); | |
361 | } else if (smi_info->msg_flags & RECEIVE_MSG_AVAIL) { | |
362 | /* Messages available. */ | |
363 | smi_info->curr_msg = ipmi_alloc_smi_msg(); | |
364 | if (!smi_info->curr_msg) { | |
365 | disable_si_irq(smi_info); | |
366 | smi_info->si_state = SI_NORMAL; | |
367 | return; | |
368 | } | |
369 | enable_si_irq(smi_info); | |
370 | ||
371 | smi_info->curr_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); | |
372 | smi_info->curr_msg->data[1] = IPMI_GET_MSG_CMD; | |
373 | smi_info->curr_msg->data_size = 2; | |
374 | ||
375 | smi_info->handlers->start_transaction( | |
376 | smi_info->si_sm, | |
377 | smi_info->curr_msg->data, | |
378 | smi_info->curr_msg->data_size); | |
379 | smi_info->si_state = SI_GETTING_MESSAGES; | |
380 | } else if (smi_info->msg_flags & EVENT_MSG_BUFFER_FULL) { | |
381 | /* Events available. */ | |
382 | smi_info->curr_msg = ipmi_alloc_smi_msg(); | |
383 | if (!smi_info->curr_msg) { | |
384 | disable_si_irq(smi_info); | |
385 | smi_info->si_state = SI_NORMAL; | |
386 | return; | |
387 | } | |
388 | enable_si_irq(smi_info); | |
389 | ||
390 | smi_info->curr_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); | |
391 | smi_info->curr_msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD; | |
392 | smi_info->curr_msg->data_size = 2; | |
393 | ||
394 | smi_info->handlers->start_transaction( | |
395 | smi_info->si_sm, | |
396 | smi_info->curr_msg->data, | |
397 | smi_info->curr_msg->data_size); | |
398 | smi_info->si_state = SI_GETTING_EVENTS; | |
3ae0e0f9 CM |
399 | } else if (smi_info->msg_flags & OEM_DATA_AVAIL) { |
400 | if (smi_info->oem_data_avail_handler) | |
401 | if (smi_info->oem_data_avail_handler(smi_info)) | |
402 | goto retry; | |
1da177e4 LT |
403 | } else { |
404 | smi_info->si_state = SI_NORMAL; | |
405 | } | |
406 | } | |
407 | ||
408 | static void handle_transaction_done(struct smi_info *smi_info) | |
409 | { | |
410 | struct ipmi_smi_msg *msg; | |
411 | #ifdef DEBUG_TIMING | |
412 | struct timeval t; | |
413 | ||
414 | do_gettimeofday(&t); | |
415 | printk("**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec); | |
416 | #endif | |
417 | switch (smi_info->si_state) { | |
418 | case SI_NORMAL: | |
419 | if (!smi_info->curr_msg) | |
420 | break; | |
421 | ||
422 | smi_info->curr_msg->rsp_size | |
423 | = smi_info->handlers->get_result( | |
424 | smi_info->si_sm, | |
425 | smi_info->curr_msg->rsp, | |
426 | IPMI_MAX_MSG_LENGTH); | |
427 | ||
428 | /* Do this here becase deliver_recv_msg() releases the | |
429 | lock, and a new message can be put in during the | |
430 | time the lock is released. */ | |
431 | msg = smi_info->curr_msg; | |
432 | smi_info->curr_msg = NULL; | |
433 | deliver_recv_msg(smi_info, msg); | |
434 | break; | |
435 | ||
436 | case SI_GETTING_FLAGS: | |
437 | { | |
438 | unsigned char msg[4]; | |
439 | unsigned int len; | |
440 | ||
441 | /* We got the flags from the SMI, now handle them. */ | |
442 | len = smi_info->handlers->get_result(smi_info->si_sm, msg, 4); | |
443 | if (msg[2] != 0) { | |
444 | /* Error fetching flags, just give up for | |
445 | now. */ | |
446 | smi_info->si_state = SI_NORMAL; | |
447 | } else if (len < 4) { | |
448 | /* Hmm, no flags. That's technically illegal, but | |
449 | don't use uninitialized data. */ | |
450 | smi_info->si_state = SI_NORMAL; | |
451 | } else { | |
452 | smi_info->msg_flags = msg[3]; | |
453 | handle_flags(smi_info); | |
454 | } | |
455 | break; | |
456 | } | |
457 | ||
458 | case SI_CLEARING_FLAGS: | |
459 | case SI_CLEARING_FLAGS_THEN_SET_IRQ: | |
460 | { | |
461 | unsigned char msg[3]; | |
462 | ||
463 | /* We cleared the flags. */ | |
464 | smi_info->handlers->get_result(smi_info->si_sm, msg, 3); | |
465 | if (msg[2] != 0) { | |
466 | /* Error clearing flags */ | |
467 | printk(KERN_WARNING | |
468 | "ipmi_si: Error clearing flags: %2.2x\n", | |
469 | msg[2]); | |
470 | } | |
471 | if (smi_info->si_state == SI_CLEARING_FLAGS_THEN_SET_IRQ) | |
472 | start_enable_irq(smi_info); | |
473 | else | |
474 | smi_info->si_state = SI_NORMAL; | |
475 | break; | |
476 | } | |
477 | ||
478 | case SI_GETTING_EVENTS: | |
479 | { | |
480 | smi_info->curr_msg->rsp_size | |
481 | = smi_info->handlers->get_result( | |
482 | smi_info->si_sm, | |
483 | smi_info->curr_msg->rsp, | |
484 | IPMI_MAX_MSG_LENGTH); | |
485 | ||
486 | /* Do this here becase deliver_recv_msg() releases the | |
487 | lock, and a new message can be put in during the | |
488 | time the lock is released. */ | |
489 | msg = smi_info->curr_msg; | |
490 | smi_info->curr_msg = NULL; | |
491 | if (msg->rsp[2] != 0) { | |
492 | /* Error getting event, probably done. */ | |
493 | msg->done(msg); | |
494 | ||
495 | /* Take off the event flag. */ | |
496 | smi_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL; | |
497 | handle_flags(smi_info); | |
498 | } else { | |
499 | spin_lock(&smi_info->count_lock); | |
500 | smi_info->events++; | |
501 | spin_unlock(&smi_info->count_lock); | |
502 | ||
503 | /* Do this before we deliver the message | |
504 | because delivering the message releases the | |
505 | lock and something else can mess with the | |
506 | state. */ | |
507 | handle_flags(smi_info); | |
508 | ||
509 | deliver_recv_msg(smi_info, msg); | |
510 | } | |
511 | break; | |
512 | } | |
513 | ||
514 | case SI_GETTING_MESSAGES: | |
515 | { | |
516 | smi_info->curr_msg->rsp_size | |
517 | = smi_info->handlers->get_result( | |
518 | smi_info->si_sm, | |
519 | smi_info->curr_msg->rsp, | |
520 | IPMI_MAX_MSG_LENGTH); | |
521 | ||
522 | /* Do this here becase deliver_recv_msg() releases the | |
523 | lock, and a new message can be put in during the | |
524 | time the lock is released. */ | |
525 | msg = smi_info->curr_msg; | |
526 | smi_info->curr_msg = NULL; | |
527 | if (msg->rsp[2] != 0) { | |
528 | /* Error getting event, probably done. */ | |
529 | msg->done(msg); | |
530 | ||
531 | /* Take off the msg flag. */ | |
532 | smi_info->msg_flags &= ~RECEIVE_MSG_AVAIL; | |
533 | handle_flags(smi_info); | |
534 | } else { | |
535 | spin_lock(&smi_info->count_lock); | |
536 | smi_info->incoming_messages++; | |
537 | spin_unlock(&smi_info->count_lock); | |
538 | ||
539 | /* Do this before we deliver the message | |
540 | because delivering the message releases the | |
541 | lock and something else can mess with the | |
542 | state. */ | |
543 | handle_flags(smi_info); | |
544 | ||
545 | deliver_recv_msg(smi_info, msg); | |
546 | } | |
547 | break; | |
548 | } | |
549 | ||
550 | case SI_ENABLE_INTERRUPTS1: | |
551 | { | |
552 | unsigned char msg[4]; | |
553 | ||
554 | /* We got the flags from the SMI, now handle them. */ | |
555 | smi_info->handlers->get_result(smi_info->si_sm, msg, 4); | |
556 | if (msg[2] != 0) { | |
557 | printk(KERN_WARNING | |
558 | "ipmi_si: Could not enable interrupts" | |
559 | ", failed get, using polled mode.\n"); | |
560 | smi_info->si_state = SI_NORMAL; | |
561 | } else { | |
562 | msg[0] = (IPMI_NETFN_APP_REQUEST << 2); | |
563 | msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD; | |
564 | msg[2] = msg[3] | 1; /* enable msg queue int */ | |
565 | smi_info->handlers->start_transaction( | |
566 | smi_info->si_sm, msg, 3); | |
567 | smi_info->si_state = SI_ENABLE_INTERRUPTS2; | |
568 | } | |
569 | break; | |
570 | } | |
571 | ||
572 | case SI_ENABLE_INTERRUPTS2: | |
573 | { | |
574 | unsigned char msg[4]; | |
575 | ||
576 | /* We got the flags from the SMI, now handle them. */ | |
577 | smi_info->handlers->get_result(smi_info->si_sm, msg, 4); | |
578 | if (msg[2] != 0) { | |
579 | printk(KERN_WARNING | |
580 | "ipmi_si: Could not enable interrupts" | |
581 | ", failed set, using polled mode.\n"); | |
582 | } | |
583 | smi_info->si_state = SI_NORMAL; | |
584 | break; | |
585 | } | |
586 | } | |
587 | } | |
588 | ||
589 | /* Called on timeouts and events. Timeouts should pass the elapsed | |
590 | time, interrupts should pass in zero. */ | |
591 | static enum si_sm_result smi_event_handler(struct smi_info *smi_info, | |
592 | int time) | |
593 | { | |
594 | enum si_sm_result si_sm_result; | |
595 | ||
596 | restart: | |
597 | /* There used to be a loop here that waited a little while | |
598 | (around 25us) before giving up. That turned out to be | |
599 | pointless, the minimum delays I was seeing were in the 300us | |
600 | range, which is far too long to wait in an interrupt. So | |
601 | we just run until the state machine tells us something | |
602 | happened or it needs a delay. */ | |
603 | si_sm_result = smi_info->handlers->event(smi_info->si_sm, time); | |
604 | time = 0; | |
605 | while (si_sm_result == SI_SM_CALL_WITHOUT_DELAY) | |
606 | { | |
607 | si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0); | |
608 | } | |
609 | ||
610 | if (si_sm_result == SI_SM_TRANSACTION_COMPLETE) | |
611 | { | |
612 | spin_lock(&smi_info->count_lock); | |
613 | smi_info->complete_transactions++; | |
614 | spin_unlock(&smi_info->count_lock); | |
615 | ||
616 | handle_transaction_done(smi_info); | |
617 | si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0); | |
618 | } | |
619 | else if (si_sm_result == SI_SM_HOSED) | |
620 | { | |
621 | spin_lock(&smi_info->count_lock); | |
622 | smi_info->hosed_count++; | |
623 | spin_unlock(&smi_info->count_lock); | |
624 | ||
625 | /* Do the before return_hosed_msg, because that | |
626 | releases the lock. */ | |
627 | smi_info->si_state = SI_NORMAL; | |
628 | if (smi_info->curr_msg != NULL) { | |
629 | /* If we were handling a user message, format | |
630 | a response to send to the upper layer to | |
631 | tell it about the error. */ | |
632 | return_hosed_msg(smi_info); | |
633 | } | |
634 | si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0); | |
635 | } | |
636 | ||
637 | /* We prefer handling attn over new messages. */ | |
638 | if (si_sm_result == SI_SM_ATTN) | |
639 | { | |
640 | unsigned char msg[2]; | |
641 | ||
642 | spin_lock(&smi_info->count_lock); | |
643 | smi_info->attentions++; | |
644 | spin_unlock(&smi_info->count_lock); | |
645 | ||
646 | /* Got a attn, send down a get message flags to see | |
647 | what's causing it. It would be better to handle | |
648 | this in the upper layer, but due to the way | |
649 | interrupts work with the SMI, that's not really | |
650 | possible. */ | |
651 | msg[0] = (IPMI_NETFN_APP_REQUEST << 2); | |
652 | msg[1] = IPMI_GET_MSG_FLAGS_CMD; | |
653 | ||
654 | smi_info->handlers->start_transaction( | |
655 | smi_info->si_sm, msg, 2); | |
656 | smi_info->si_state = SI_GETTING_FLAGS; | |
657 | goto restart; | |
658 | } | |
659 | ||
660 | /* If we are currently idle, try to start the next message. */ | |
661 | if (si_sm_result == SI_SM_IDLE) { | |
662 | spin_lock(&smi_info->count_lock); | |
663 | smi_info->idles++; | |
664 | spin_unlock(&smi_info->count_lock); | |
665 | ||
666 | si_sm_result = start_next_msg(smi_info); | |
667 | if (si_sm_result != SI_SM_IDLE) | |
668 | goto restart; | |
669 | } | |
670 | ||
671 | if ((si_sm_result == SI_SM_IDLE) | |
672 | && (atomic_read(&smi_info->req_events))) | |
673 | { | |
674 | /* We are idle and the upper layer requested that I fetch | |
675 | events, so do so. */ | |
676 | unsigned char msg[2]; | |
677 | ||
678 | spin_lock(&smi_info->count_lock); | |
679 | smi_info->flag_fetches++; | |
680 | spin_unlock(&smi_info->count_lock); | |
681 | ||
682 | atomic_set(&smi_info->req_events, 0); | |
683 | msg[0] = (IPMI_NETFN_APP_REQUEST << 2); | |
684 | msg[1] = IPMI_GET_MSG_FLAGS_CMD; | |
685 | ||
686 | smi_info->handlers->start_transaction( | |
687 | smi_info->si_sm, msg, 2); | |
688 | smi_info->si_state = SI_GETTING_FLAGS; | |
689 | goto restart; | |
690 | } | |
691 | ||
692 | return si_sm_result; | |
693 | } | |
694 | ||
695 | static void sender(void *send_info, | |
696 | struct ipmi_smi_msg *msg, | |
697 | int priority) | |
698 | { | |
699 | struct smi_info *smi_info = send_info; | |
700 | enum si_sm_result result; | |
701 | unsigned long flags; | |
702 | #ifdef DEBUG_TIMING | |
703 | struct timeval t; | |
704 | #endif | |
705 | ||
706 | spin_lock_irqsave(&(smi_info->msg_lock), flags); | |
707 | #ifdef DEBUG_TIMING | |
708 | do_gettimeofday(&t); | |
709 | printk("**Enqueue: %d.%9.9d\n", t.tv_sec, t.tv_usec); | |
710 | #endif | |
711 | ||
712 | if (smi_info->run_to_completion) { | |
713 | /* If we are running to completion, then throw it in | |
714 | the list and run transactions until everything is | |
715 | clear. Priority doesn't matter here. */ | |
716 | list_add_tail(&(msg->link), &(smi_info->xmit_msgs)); | |
717 | ||
718 | /* We have to release the msg lock and claim the smi | |
719 | lock in this case, because of race conditions. */ | |
720 | spin_unlock_irqrestore(&(smi_info->msg_lock), flags); | |
721 | ||
722 | spin_lock_irqsave(&(smi_info->si_lock), flags); | |
723 | result = smi_event_handler(smi_info, 0); | |
724 | while (result != SI_SM_IDLE) { | |
725 | udelay(SI_SHORT_TIMEOUT_USEC); | |
726 | result = smi_event_handler(smi_info, | |
727 | SI_SHORT_TIMEOUT_USEC); | |
728 | } | |
729 | spin_unlock_irqrestore(&(smi_info->si_lock), flags); | |
730 | return; | |
731 | } else { | |
732 | if (priority > 0) { | |
733 | list_add_tail(&(msg->link), &(smi_info->hp_xmit_msgs)); | |
734 | } else { | |
735 | list_add_tail(&(msg->link), &(smi_info->xmit_msgs)); | |
736 | } | |
737 | } | |
738 | spin_unlock_irqrestore(&(smi_info->msg_lock), flags); | |
739 | ||
740 | spin_lock_irqsave(&(smi_info->si_lock), flags); | |
741 | if ((smi_info->si_state == SI_NORMAL) | |
742 | && (smi_info->curr_msg == NULL)) | |
743 | { | |
744 | start_next_msg(smi_info); | |
745 | si_restart_short_timer(smi_info); | |
746 | } | |
747 | spin_unlock_irqrestore(&(smi_info->si_lock), flags); | |
748 | } | |
749 | ||
750 | static void set_run_to_completion(void *send_info, int i_run_to_completion) | |
751 | { | |
752 | struct smi_info *smi_info = send_info; | |
753 | enum si_sm_result result; | |
754 | unsigned long flags; | |
755 | ||
756 | spin_lock_irqsave(&(smi_info->si_lock), flags); | |
757 | ||
758 | smi_info->run_to_completion = i_run_to_completion; | |
759 | if (i_run_to_completion) { | |
760 | result = smi_event_handler(smi_info, 0); | |
761 | while (result != SI_SM_IDLE) { | |
762 | udelay(SI_SHORT_TIMEOUT_USEC); | |
763 | result = smi_event_handler(smi_info, | |
764 | SI_SHORT_TIMEOUT_USEC); | |
765 | } | |
766 | } | |
767 | ||
768 | spin_unlock_irqrestore(&(smi_info->si_lock), flags); | |
769 | } | |
770 | ||
771 | static void poll(void *send_info) | |
772 | { | |
773 | struct smi_info *smi_info = send_info; | |
774 | ||
775 | smi_event_handler(smi_info, 0); | |
776 | } | |
777 | ||
778 | static void request_events(void *send_info) | |
779 | { | |
780 | struct smi_info *smi_info = send_info; | |
781 | ||
782 | atomic_set(&smi_info->req_events, 1); | |
783 | } | |
784 | ||
785 | static int initialized = 0; | |
786 | ||
787 | /* Must be called with interrupts off and with the si_lock held. */ | |
788 | static void si_restart_short_timer(struct smi_info *smi_info) | |
789 | { | |
790 | #if defined(CONFIG_HIGH_RES_TIMERS) | |
791 | unsigned long flags; | |
792 | unsigned long jiffies_now; | |
75b0768a | 793 | unsigned long seq; |
1da177e4 LT |
794 | |
795 | if (del_timer(&(smi_info->si_timer))) { | |
796 | /* If we don't delete the timer, then it will go off | |
797 | immediately, anyway. So we only process if we | |
798 | actually delete the timer. */ | |
799 | ||
75b0768a CM |
800 | do { |
801 | seq = read_seqbegin_irqsave(&xtime_lock, flags); | |
802 | jiffies_now = jiffies; | |
803 | smi_info->si_timer.expires = jiffies_now; | |
804 | smi_info->si_timer.arch_cycle_expires | |
805 | = get_arch_cycles(jiffies_now); | |
806 | } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); | |
1da177e4 LT |
807 | |
808 | add_usec_to_timer(&smi_info->si_timer, SI_SHORT_TIMEOUT_USEC); | |
809 | ||
810 | add_timer(&(smi_info->si_timer)); | |
811 | spin_lock_irqsave(&smi_info->count_lock, flags); | |
812 | smi_info->timeout_restarts++; | |
813 | spin_unlock_irqrestore(&smi_info->count_lock, flags); | |
814 | } | |
815 | #endif | |
816 | } | |
817 | ||
818 | static void smi_timeout(unsigned long data) | |
819 | { | |
820 | struct smi_info *smi_info = (struct smi_info *) data; | |
821 | enum si_sm_result smi_result; | |
822 | unsigned long flags; | |
823 | unsigned long jiffies_now; | |
824 | unsigned long time_diff; | |
825 | #ifdef DEBUG_TIMING | |
826 | struct timeval t; | |
827 | #endif | |
828 | ||
829 | if (smi_info->stop_operation) { | |
830 | smi_info->timer_stopped = 1; | |
831 | return; | |
832 | } | |
833 | ||
834 | spin_lock_irqsave(&(smi_info->si_lock), flags); | |
835 | #ifdef DEBUG_TIMING | |
836 | do_gettimeofday(&t); | |
837 | printk("**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec); | |
838 | #endif | |
839 | jiffies_now = jiffies; | |
840 | time_diff = ((jiffies_now - smi_info->last_timeout_jiffies) | |
841 | * SI_USEC_PER_JIFFY); | |
842 | smi_result = smi_event_handler(smi_info, time_diff); | |
843 | ||
844 | spin_unlock_irqrestore(&(smi_info->si_lock), flags); | |
845 | ||
846 | smi_info->last_timeout_jiffies = jiffies_now; | |
847 | ||
848 | if ((smi_info->irq) && (! smi_info->interrupt_disabled)) { | |
849 | /* Running with interrupts, only do long timeouts. */ | |
850 | smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES; | |
851 | spin_lock_irqsave(&smi_info->count_lock, flags); | |
852 | smi_info->long_timeouts++; | |
853 | spin_unlock_irqrestore(&smi_info->count_lock, flags); | |
854 | goto do_add_timer; | |
855 | } | |
856 | ||
857 | /* If the state machine asks for a short delay, then shorten | |
858 | the timer timeout. */ | |
859 | if (smi_result == SI_SM_CALL_WITH_DELAY) { | |
75b0768a CM |
860 | #if defined(CONFIG_HIGH_RES_TIMERS) |
861 | unsigned long seq; | |
862 | #endif | |
1da177e4 LT |
863 | spin_lock_irqsave(&smi_info->count_lock, flags); |
864 | smi_info->short_timeouts++; | |
865 | spin_unlock_irqrestore(&smi_info->count_lock, flags); | |
866 | #if defined(CONFIG_HIGH_RES_TIMERS) | |
75b0768a CM |
867 | do { |
868 | seq = read_seqbegin_irqsave(&xtime_lock, flags); | |
869 | smi_info->si_timer.expires = jiffies; | |
870 | smi_info->si_timer.arch_cycle_expires | |
871 | = get_arch_cycles(smi_info->si_timer.expires); | |
872 | } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); | |
1da177e4 LT |
873 | add_usec_to_timer(&smi_info->si_timer, SI_SHORT_TIMEOUT_USEC); |
874 | #else | |
875 | smi_info->si_timer.expires = jiffies + 1; | |
876 | #endif | |
877 | } else { | |
878 | spin_lock_irqsave(&smi_info->count_lock, flags); | |
879 | smi_info->long_timeouts++; | |
880 | spin_unlock_irqrestore(&smi_info->count_lock, flags); | |
881 | smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES; | |
882 | #if defined(CONFIG_HIGH_RES_TIMERS) | |
75b0768a | 883 | smi_info->si_timer.arch_cycle_expires = 0; |
1da177e4 LT |
884 | #endif |
885 | } | |
886 | ||
887 | do_add_timer: | |
888 | add_timer(&(smi_info->si_timer)); | |
889 | } | |
890 | ||
891 | static irqreturn_t si_irq_handler(int irq, void *data, struct pt_regs *regs) | |
892 | { | |
893 | struct smi_info *smi_info = data; | |
894 | unsigned long flags; | |
895 | #ifdef DEBUG_TIMING | |
896 | struct timeval t; | |
897 | #endif | |
898 | ||
899 | spin_lock_irqsave(&(smi_info->si_lock), flags); | |
900 | ||
901 | spin_lock(&smi_info->count_lock); | |
902 | smi_info->interrupts++; | |
903 | spin_unlock(&smi_info->count_lock); | |
904 | ||
905 | if (smi_info->stop_operation) | |
906 | goto out; | |
907 | ||
908 | #ifdef DEBUG_TIMING | |
909 | do_gettimeofday(&t); | |
910 | printk("**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec); | |
911 | #endif | |
912 | smi_event_handler(smi_info, 0); | |
913 | out: | |
914 | spin_unlock_irqrestore(&(smi_info->si_lock), flags); | |
915 | return IRQ_HANDLED; | |
916 | } | |
917 | ||
9dbf68f9 CM |
918 | static irqreturn_t si_bt_irq_handler(int irq, void *data, struct pt_regs *regs) |
919 | { | |
920 | struct smi_info *smi_info = data; | |
921 | /* We need to clear the IRQ flag for the BT interface. */ | |
922 | smi_info->io.outputb(&smi_info->io, IPMI_BT_INTMASK_REG, | |
923 | IPMI_BT_INTMASK_CLEAR_IRQ_BIT | |
924 | | IPMI_BT_INTMASK_ENABLE_IRQ_BIT); | |
925 | return si_irq_handler(irq, data, regs); | |
926 | } | |
927 | ||
928 | ||
1da177e4 LT |
929 | static struct ipmi_smi_handlers handlers = |
930 | { | |
931 | .owner = THIS_MODULE, | |
932 | .sender = sender, | |
933 | .request_events = request_events, | |
934 | .set_run_to_completion = set_run_to_completion, | |
935 | .poll = poll, | |
936 | }; | |
937 | ||
938 | /* There can be 4 IO ports passed in (with or without IRQs), 4 addresses, | |
939 | a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS */ | |
940 | ||
941 | #define SI_MAX_PARMS 4 | |
942 | #define SI_MAX_DRIVERS ((SI_MAX_PARMS * 2) + 2) | |
943 | static struct smi_info *smi_infos[SI_MAX_DRIVERS] = | |
944 | { NULL, NULL, NULL, NULL }; | |
945 | ||
946 | #define DEVICE_NAME "ipmi_si" | |
947 | ||
948 | #define DEFAULT_KCS_IO_PORT 0xca2 | |
949 | #define DEFAULT_SMIC_IO_PORT 0xca9 | |
950 | #define DEFAULT_BT_IO_PORT 0xe4 | |
951 | #define DEFAULT_REGSPACING 1 | |
952 | ||
953 | static int si_trydefaults = 1; | |
954 | static char *si_type[SI_MAX_PARMS]; | |
955 | #define MAX_SI_TYPE_STR 30 | |
956 | static char si_type_str[MAX_SI_TYPE_STR]; | |
957 | static unsigned long addrs[SI_MAX_PARMS]; | |
958 | static int num_addrs; | |
959 | static unsigned int ports[SI_MAX_PARMS]; | |
960 | static int num_ports; | |
961 | static int irqs[SI_MAX_PARMS]; | |
962 | static int num_irqs; | |
963 | static int regspacings[SI_MAX_PARMS]; | |
964 | static int num_regspacings = 0; | |
965 | static int regsizes[SI_MAX_PARMS]; | |
966 | static int num_regsizes = 0; | |
967 | static int regshifts[SI_MAX_PARMS]; | |
968 | static int num_regshifts = 0; | |
969 | static int slave_addrs[SI_MAX_PARMS]; | |
970 | static int num_slave_addrs = 0; | |
971 | ||
972 | ||
973 | module_param_named(trydefaults, si_trydefaults, bool, 0); | |
974 | MODULE_PARM_DESC(trydefaults, "Setting this to 'false' will disable the" | |
975 | " default scan of the KCS and SMIC interface at the standard" | |
976 | " address"); | |
977 | module_param_string(type, si_type_str, MAX_SI_TYPE_STR, 0); | |
978 | MODULE_PARM_DESC(type, "Defines the type of each interface, each" | |
979 | " interface separated by commas. The types are 'kcs'," | |
980 | " 'smic', and 'bt'. For example si_type=kcs,bt will set" | |
981 | " the first interface to kcs and the second to bt"); | |
982 | module_param_array(addrs, long, &num_addrs, 0); | |
983 | MODULE_PARM_DESC(addrs, "Sets the memory address of each interface, the" | |
984 | " addresses separated by commas. Only use if an interface" | |
985 | " is in memory. Otherwise, set it to zero or leave" | |
986 | " it blank."); | |
987 | module_param_array(ports, int, &num_ports, 0); | |
988 | MODULE_PARM_DESC(ports, "Sets the port address of each interface, the" | |
989 | " addresses separated by commas. Only use if an interface" | |
990 | " is a port. Otherwise, set it to zero or leave" | |
991 | " it blank."); | |
992 | module_param_array(irqs, int, &num_irqs, 0); | |
993 | MODULE_PARM_DESC(irqs, "Sets the interrupt of each interface, the" | |
994 | " addresses separated by commas. Only use if an interface" | |
995 | " has an interrupt. Otherwise, set it to zero or leave" | |
996 | " it blank."); | |
997 | module_param_array(regspacings, int, &num_regspacings, 0); | |
998 | MODULE_PARM_DESC(regspacings, "The number of bytes between the start address" | |
999 | " and each successive register used by the interface. For" | |
1000 | " instance, if the start address is 0xca2 and the spacing" | |
1001 | " is 2, then the second address is at 0xca4. Defaults" | |
1002 | " to 1."); | |
1003 | module_param_array(regsizes, int, &num_regsizes, 0); | |
1004 | MODULE_PARM_DESC(regsizes, "The size of the specific IPMI register in bytes." | |
1005 | " This should generally be 1, 2, 4, or 8 for an 8-bit," | |
1006 | " 16-bit, 32-bit, or 64-bit register. Use this if you" | |
1007 | " the 8-bit IPMI register has to be read from a larger" | |
1008 | " register."); | |
1009 | module_param_array(regshifts, int, &num_regshifts, 0); | |
1010 | MODULE_PARM_DESC(regshifts, "The amount to shift the data read from the." | |
1011 | " IPMI register, in bits. For instance, if the data" | |
1012 | " is read from a 32-bit word and the IPMI data is in" | |
1013 | " bit 8-15, then the shift would be 8"); | |
1014 | module_param_array(slave_addrs, int, &num_slave_addrs, 0); | |
1015 | MODULE_PARM_DESC(slave_addrs, "Set the default IPMB slave address for" | |
1016 | " the controller. Normally this is 0x20, but can be" | |
1017 | " overridden by this parm. This is an array indexed" | |
1018 | " by interface number."); | |
1019 | ||
1020 | ||
1021 | #define IPMI_MEM_ADDR_SPACE 1 | |
1022 | #define IPMI_IO_ADDR_SPACE 2 | |
1023 | ||
1024 | #if defined(CONFIG_ACPI_INTERPRETER) || defined(CONFIG_X86) || defined(CONFIG_PCI) | |
1025 | static int is_new_interface(int intf, u8 addr_space, unsigned long base_addr) | |
1026 | { | |
1027 | int i; | |
1028 | ||
1029 | for (i = 0; i < SI_MAX_PARMS; ++i) { | |
1030 | /* Don't check our address. */ | |
1031 | if (i == intf) | |
1032 | continue; | |
1033 | if (si_type[i] != NULL) { | |
1034 | if ((addr_space == IPMI_MEM_ADDR_SPACE && | |
1035 | base_addr == addrs[i]) || | |
1036 | (addr_space == IPMI_IO_ADDR_SPACE && | |
1037 | base_addr == ports[i])) | |
1038 | return 0; | |
1039 | } | |
1040 | else | |
1041 | break; | |
1042 | } | |
1043 | ||
1044 | return 1; | |
1045 | } | |
1046 | #endif | |
1047 | ||
1048 | static int std_irq_setup(struct smi_info *info) | |
1049 | { | |
1050 | int rv; | |
1051 | ||
1052 | if (!info->irq) | |
1053 | return 0; | |
1054 | ||
9dbf68f9 CM |
1055 | if (info->si_type == SI_BT) { |
1056 | rv = request_irq(info->irq, | |
1057 | si_bt_irq_handler, | |
1058 | SA_INTERRUPT, | |
1059 | DEVICE_NAME, | |
1060 | info); | |
1061 | if (!rv) | |
1062 | /* Enable the interrupt in the BT interface. */ | |
1063 | info->io.outputb(&info->io, IPMI_BT_INTMASK_REG, | |
1064 | IPMI_BT_INTMASK_ENABLE_IRQ_BIT); | |
1065 | } else | |
1066 | rv = request_irq(info->irq, | |
1067 | si_irq_handler, | |
1068 | SA_INTERRUPT, | |
1069 | DEVICE_NAME, | |
1070 | info); | |
1da177e4 LT |
1071 | if (rv) { |
1072 | printk(KERN_WARNING | |
1073 | "ipmi_si: %s unable to claim interrupt %d," | |
1074 | " running polled\n", | |
1075 | DEVICE_NAME, info->irq); | |
1076 | info->irq = 0; | |
1077 | } else { | |
1078 | printk(" Using irq %d\n", info->irq); | |
1079 | } | |
1080 | ||
1081 | return rv; | |
1082 | } | |
1083 | ||
1084 | static void std_irq_cleanup(struct smi_info *info) | |
1085 | { | |
1086 | if (!info->irq) | |
1087 | return; | |
1088 | ||
9dbf68f9 CM |
1089 | if (info->si_type == SI_BT) |
1090 | /* Disable the interrupt in the BT interface. */ | |
1091 | info->io.outputb(&info->io, IPMI_BT_INTMASK_REG, 0); | |
1da177e4 LT |
1092 | free_irq(info->irq, info); |
1093 | } | |
1094 | ||
1095 | static unsigned char port_inb(struct si_sm_io *io, unsigned int offset) | |
1096 | { | |
1097 | unsigned int *addr = io->info; | |
1098 | ||
1099 | return inb((*addr)+(offset*io->regspacing)); | |
1100 | } | |
1101 | ||
1102 | static void port_outb(struct si_sm_io *io, unsigned int offset, | |
1103 | unsigned char b) | |
1104 | { | |
1105 | unsigned int *addr = io->info; | |
1106 | ||
1107 | outb(b, (*addr)+(offset * io->regspacing)); | |
1108 | } | |
1109 | ||
1110 | static unsigned char port_inw(struct si_sm_io *io, unsigned int offset) | |
1111 | { | |
1112 | unsigned int *addr = io->info; | |
1113 | ||
1114 | return (inw((*addr)+(offset * io->regspacing)) >> io->regshift) & 0xff; | |
1115 | } | |
1116 | ||
1117 | static void port_outw(struct si_sm_io *io, unsigned int offset, | |
1118 | unsigned char b) | |
1119 | { | |
1120 | unsigned int *addr = io->info; | |
1121 | ||
1122 | outw(b << io->regshift, (*addr)+(offset * io->regspacing)); | |
1123 | } | |
1124 | ||
1125 | static unsigned char port_inl(struct si_sm_io *io, unsigned int offset) | |
1126 | { | |
1127 | unsigned int *addr = io->info; | |
1128 | ||
1129 | return (inl((*addr)+(offset * io->regspacing)) >> io->regshift) & 0xff; | |
1130 | } | |
1131 | ||
1132 | static void port_outl(struct si_sm_io *io, unsigned int offset, | |
1133 | unsigned char b) | |
1134 | { | |
1135 | unsigned int *addr = io->info; | |
1136 | ||
1137 | outl(b << io->regshift, (*addr)+(offset * io->regspacing)); | |
1138 | } | |
1139 | ||
1140 | static void port_cleanup(struct smi_info *info) | |
1141 | { | |
1142 | unsigned int *addr = info->io.info; | |
1143 | int mapsize; | |
1144 | ||
1145 | if (addr && (*addr)) { | |
1146 | mapsize = ((info->io_size * info->io.regspacing) | |
1147 | - (info->io.regspacing - info->io.regsize)); | |
1148 | ||
1149 | release_region (*addr, mapsize); | |
1150 | } | |
1151 | kfree(info); | |
1152 | } | |
1153 | ||
1154 | static int port_setup(struct smi_info *info) | |
1155 | { | |
1156 | unsigned int *addr = info->io.info; | |
1157 | int mapsize; | |
1158 | ||
1159 | if (!addr || (!*addr)) | |
1160 | return -ENODEV; | |
1161 | ||
1162 | info->io_cleanup = port_cleanup; | |
1163 | ||
1164 | /* Figure out the actual inb/inw/inl/etc routine to use based | |
1165 | upon the register size. */ | |
1166 | switch (info->io.regsize) { | |
1167 | case 1: | |
1168 | info->io.inputb = port_inb; | |
1169 | info->io.outputb = port_outb; | |
1170 | break; | |
1171 | case 2: | |
1172 | info->io.inputb = port_inw; | |
1173 | info->io.outputb = port_outw; | |
1174 | break; | |
1175 | case 4: | |
1176 | info->io.inputb = port_inl; | |
1177 | info->io.outputb = port_outl; | |
1178 | break; | |
1179 | default: | |
1180 | printk("ipmi_si: Invalid register size: %d\n", | |
1181 | info->io.regsize); | |
1182 | return -EINVAL; | |
1183 | } | |
1184 | ||
1185 | /* Calculate the total amount of memory to claim. This is an | |
1186 | * unusual looking calculation, but it avoids claiming any | |
1187 | * more memory than it has to. It will claim everything | |
1188 | * between the first address to the end of the last full | |
1189 | * register. */ | |
1190 | mapsize = ((info->io_size * info->io.regspacing) | |
1191 | - (info->io.regspacing - info->io.regsize)); | |
1192 | ||
1193 | if (request_region(*addr, mapsize, DEVICE_NAME) == NULL) | |
1194 | return -EIO; | |
1195 | return 0; | |
1196 | } | |
1197 | ||
1198 | static int try_init_port(int intf_num, struct smi_info **new_info) | |
1199 | { | |
1200 | struct smi_info *info; | |
1201 | ||
1202 | if (!ports[intf_num]) | |
1203 | return -ENODEV; | |
1204 | ||
1205 | if (!is_new_interface(intf_num, IPMI_IO_ADDR_SPACE, | |
1206 | ports[intf_num])) | |
1207 | return -ENODEV; | |
1208 | ||
1209 | info = kmalloc(sizeof(*info), GFP_KERNEL); | |
1210 | if (!info) { | |
1211 | printk(KERN_ERR "ipmi_si: Could not allocate SI data (1)\n"); | |
1212 | return -ENOMEM; | |
1213 | } | |
1214 | memset(info, 0, sizeof(*info)); | |
1215 | ||
1216 | info->io_setup = port_setup; | |
1217 | info->io.info = &(ports[intf_num]); | |
1218 | info->io.addr = NULL; | |
1219 | info->io.regspacing = regspacings[intf_num]; | |
1220 | if (!info->io.regspacing) | |
1221 | info->io.regspacing = DEFAULT_REGSPACING; | |
1222 | info->io.regsize = regsizes[intf_num]; | |
1223 | if (!info->io.regsize) | |
1224 | info->io.regsize = DEFAULT_REGSPACING; | |
1225 | info->io.regshift = regshifts[intf_num]; | |
1226 | info->irq = 0; | |
1227 | info->irq_setup = NULL; | |
1228 | *new_info = info; | |
1229 | ||
1230 | if (si_type[intf_num] == NULL) | |
1231 | si_type[intf_num] = "kcs"; | |
1232 | ||
1233 | printk("ipmi_si: Trying \"%s\" at I/O port 0x%x\n", | |
1234 | si_type[intf_num], ports[intf_num]); | |
1235 | return 0; | |
1236 | } | |
1237 | ||
1238 | static unsigned char mem_inb(struct si_sm_io *io, unsigned int offset) | |
1239 | { | |
1240 | return readb((io->addr)+(offset * io->regspacing)); | |
1241 | } | |
1242 | ||
1243 | static void mem_outb(struct si_sm_io *io, unsigned int offset, | |
1244 | unsigned char b) | |
1245 | { | |
1246 | writeb(b, (io->addr)+(offset * io->regspacing)); | |
1247 | } | |
1248 | ||
1249 | static unsigned char mem_inw(struct si_sm_io *io, unsigned int offset) | |
1250 | { | |
1251 | return (readw((io->addr)+(offset * io->regspacing)) >> io->regshift) | |
1252 | && 0xff; | |
1253 | } | |
1254 | ||
1255 | static void mem_outw(struct si_sm_io *io, unsigned int offset, | |
1256 | unsigned char b) | |
1257 | { | |
1258 | writeb(b << io->regshift, (io->addr)+(offset * io->regspacing)); | |
1259 | } | |
1260 | ||
1261 | static unsigned char mem_inl(struct si_sm_io *io, unsigned int offset) | |
1262 | { | |
1263 | return (readl((io->addr)+(offset * io->regspacing)) >> io->regshift) | |
1264 | && 0xff; | |
1265 | } | |
1266 | ||
1267 | static void mem_outl(struct si_sm_io *io, unsigned int offset, | |
1268 | unsigned char b) | |
1269 | { | |
1270 | writel(b << io->regshift, (io->addr)+(offset * io->regspacing)); | |
1271 | } | |
1272 | ||
1273 | #ifdef readq | |
1274 | static unsigned char mem_inq(struct si_sm_io *io, unsigned int offset) | |
1275 | { | |
1276 | return (readq((io->addr)+(offset * io->regspacing)) >> io->regshift) | |
1277 | && 0xff; | |
1278 | } | |
1279 | ||
1280 | static void mem_outq(struct si_sm_io *io, unsigned int offset, | |
1281 | unsigned char b) | |
1282 | { | |
1283 | writeq(b << io->regshift, (io->addr)+(offset * io->regspacing)); | |
1284 | } | |
1285 | #endif | |
1286 | ||
1287 | static void mem_cleanup(struct smi_info *info) | |
1288 | { | |
1289 | unsigned long *addr = info->io.info; | |
1290 | int mapsize; | |
1291 | ||
1292 | if (info->io.addr) { | |
1293 | iounmap(info->io.addr); | |
1294 | ||
1295 | mapsize = ((info->io_size * info->io.regspacing) | |
1296 | - (info->io.regspacing - info->io.regsize)); | |
1297 | ||
1298 | release_mem_region(*addr, mapsize); | |
1299 | } | |
1300 | kfree(info); | |
1301 | } | |
1302 | ||
1303 | static int mem_setup(struct smi_info *info) | |
1304 | { | |
1305 | unsigned long *addr = info->io.info; | |
1306 | int mapsize; | |
1307 | ||
1308 | if (!addr || (!*addr)) | |
1309 | return -ENODEV; | |
1310 | ||
1311 | info->io_cleanup = mem_cleanup; | |
1312 | ||
1313 | /* Figure out the actual readb/readw/readl/etc routine to use based | |
1314 | upon the register size. */ | |
1315 | switch (info->io.regsize) { | |
1316 | case 1: | |
1317 | info->io.inputb = mem_inb; | |
1318 | info->io.outputb = mem_outb; | |
1319 | break; | |
1320 | case 2: | |
1321 | info->io.inputb = mem_inw; | |
1322 | info->io.outputb = mem_outw; | |
1323 | break; | |
1324 | case 4: | |
1325 | info->io.inputb = mem_inl; | |
1326 | info->io.outputb = mem_outl; | |
1327 | break; | |
1328 | #ifdef readq | |
1329 | case 8: | |
1330 | info->io.inputb = mem_inq; | |
1331 | info->io.outputb = mem_outq; | |
1332 | break; | |
1333 | #endif | |
1334 | default: | |
1335 | printk("ipmi_si: Invalid register size: %d\n", | |
1336 | info->io.regsize); | |
1337 | return -EINVAL; | |
1338 | } | |
1339 | ||
1340 | /* Calculate the total amount of memory to claim. This is an | |
1341 | * unusual looking calculation, but it avoids claiming any | |
1342 | * more memory than it has to. It will claim everything | |
1343 | * between the first address to the end of the last full | |
1344 | * register. */ | |
1345 | mapsize = ((info->io_size * info->io.regspacing) | |
1346 | - (info->io.regspacing - info->io.regsize)); | |
1347 | ||
1348 | if (request_mem_region(*addr, mapsize, DEVICE_NAME) == NULL) | |
1349 | return -EIO; | |
1350 | ||
1351 | info->io.addr = ioremap(*addr, mapsize); | |
1352 | if (info->io.addr == NULL) { | |
1353 | release_mem_region(*addr, mapsize); | |
1354 | return -EIO; | |
1355 | } | |
1356 | return 0; | |
1357 | } | |
1358 | ||
1359 | static int try_init_mem(int intf_num, struct smi_info **new_info) | |
1360 | { | |
1361 | struct smi_info *info; | |
1362 | ||
1363 | if (!addrs[intf_num]) | |
1364 | return -ENODEV; | |
1365 | ||
1366 | if (!is_new_interface(intf_num, IPMI_MEM_ADDR_SPACE, | |
1367 | addrs[intf_num])) | |
1368 | return -ENODEV; | |
1369 | ||
1370 | info = kmalloc(sizeof(*info), GFP_KERNEL); | |
1371 | if (!info) { | |
1372 | printk(KERN_ERR "ipmi_si: Could not allocate SI data (2)\n"); | |
1373 | return -ENOMEM; | |
1374 | } | |
1375 | memset(info, 0, sizeof(*info)); | |
1376 | ||
1377 | info->io_setup = mem_setup; | |
1378 | info->io.info = &addrs[intf_num]; | |
1379 | info->io.addr = NULL; | |
1380 | info->io.regspacing = regspacings[intf_num]; | |
1381 | if (!info->io.regspacing) | |
1382 | info->io.regspacing = DEFAULT_REGSPACING; | |
1383 | info->io.regsize = regsizes[intf_num]; | |
1384 | if (!info->io.regsize) | |
1385 | info->io.regsize = DEFAULT_REGSPACING; | |
1386 | info->io.regshift = regshifts[intf_num]; | |
1387 | info->irq = 0; | |
1388 | info->irq_setup = NULL; | |
1389 | *new_info = info; | |
1390 | ||
1391 | if (si_type[intf_num] == NULL) | |
1392 | si_type[intf_num] = "kcs"; | |
1393 | ||
1394 | printk("ipmi_si: Trying \"%s\" at memory address 0x%lx\n", | |
1395 | si_type[intf_num], addrs[intf_num]); | |
1396 | return 0; | |
1397 | } | |
1398 | ||
1399 | ||
1400 | #ifdef CONFIG_ACPI_INTERPRETER | |
1401 | ||
1402 | #include <linux/acpi.h> | |
1403 | ||
1404 | /* Once we get an ACPI failure, we don't try any more, because we go | |
1405 | through the tables sequentially. Once we don't find a table, there | |
1406 | are no more. */ | |
1407 | static int acpi_failure = 0; | |
1408 | ||
1409 | /* For GPE-type interrupts. */ | |
1410 | static u32 ipmi_acpi_gpe(void *context) | |
1411 | { | |
1412 | struct smi_info *smi_info = context; | |
1413 | unsigned long flags; | |
1414 | #ifdef DEBUG_TIMING | |
1415 | struct timeval t; | |
1416 | #endif | |
1417 | ||
1418 | spin_lock_irqsave(&(smi_info->si_lock), flags); | |
1419 | ||
1420 | spin_lock(&smi_info->count_lock); | |
1421 | smi_info->interrupts++; | |
1422 | spin_unlock(&smi_info->count_lock); | |
1423 | ||
1424 | if (smi_info->stop_operation) | |
1425 | goto out; | |
1426 | ||
1427 | #ifdef DEBUG_TIMING | |
1428 | do_gettimeofday(&t); | |
1429 | printk("**ACPI_GPE: %d.%9.9d\n", t.tv_sec, t.tv_usec); | |
1430 | #endif | |
1431 | smi_event_handler(smi_info, 0); | |
1432 | out: | |
1433 | spin_unlock_irqrestore(&(smi_info->si_lock), flags); | |
1434 | ||
1435 | return ACPI_INTERRUPT_HANDLED; | |
1436 | } | |
1437 | ||
1438 | static int acpi_gpe_irq_setup(struct smi_info *info) | |
1439 | { | |
1440 | acpi_status status; | |
1441 | ||
1442 | if (!info->irq) | |
1443 | return 0; | |
1444 | ||
1445 | /* FIXME - is level triggered right? */ | |
1446 | status = acpi_install_gpe_handler(NULL, | |
1447 | info->irq, | |
1448 | ACPI_GPE_LEVEL_TRIGGERED, | |
1449 | &ipmi_acpi_gpe, | |
1450 | info); | |
1451 | if (status != AE_OK) { | |
1452 | printk(KERN_WARNING | |
1453 | "ipmi_si: %s unable to claim ACPI GPE %d," | |
1454 | " running polled\n", | |
1455 | DEVICE_NAME, info->irq); | |
1456 | info->irq = 0; | |
1457 | return -EINVAL; | |
1458 | } else { | |
1459 | printk(" Using ACPI GPE %d\n", info->irq); | |
1460 | return 0; | |
1461 | } | |
1462 | } | |
1463 | ||
1464 | static void acpi_gpe_irq_cleanup(struct smi_info *info) | |
1465 | { | |
1466 | if (!info->irq) | |
1467 | return; | |
1468 | ||
1469 | acpi_remove_gpe_handler(NULL, info->irq, &ipmi_acpi_gpe); | |
1470 | } | |
1471 | ||
1472 | /* | |
1473 | * Defined at | |
1474 | * http://h21007.www2.hp.com/dspp/files/unprotected/devresource/Docs/TechPapers/IA64/hpspmi.pdf | |
1475 | */ | |
1476 | struct SPMITable { | |
1477 | s8 Signature[4]; | |
1478 | u32 Length; | |
1479 | u8 Revision; | |
1480 | u8 Checksum; | |
1481 | s8 OEMID[6]; | |
1482 | s8 OEMTableID[8]; | |
1483 | s8 OEMRevision[4]; | |
1484 | s8 CreatorID[4]; | |
1485 | s8 CreatorRevision[4]; | |
1486 | u8 InterfaceType; | |
1487 | u8 IPMIlegacy; | |
1488 | s16 SpecificationRevision; | |
1489 | ||
1490 | /* | |
1491 | * Bit 0 - SCI interrupt supported | |
1492 | * Bit 1 - I/O APIC/SAPIC | |
1493 | */ | |
1494 | u8 InterruptType; | |
1495 | ||
1496 | /* If bit 0 of InterruptType is set, then this is the SCI | |
1497 | interrupt in the GPEx_STS register. */ | |
1498 | u8 GPE; | |
1499 | ||
1500 | s16 Reserved; | |
1501 | ||
1502 | /* If bit 1 of InterruptType is set, then this is the I/O | |
1503 | APIC/SAPIC interrupt. */ | |
1504 | u32 GlobalSystemInterrupt; | |
1505 | ||
1506 | /* The actual register address. */ | |
1507 | struct acpi_generic_address addr; | |
1508 | ||
1509 | u8 UID[4]; | |
1510 | ||
1511 | s8 spmi_id[1]; /* A '\0' terminated array starts here. */ | |
1512 | }; | |
1513 | ||
1514 | static int try_init_acpi(int intf_num, struct smi_info **new_info) | |
1515 | { | |
1516 | struct smi_info *info; | |
1517 | acpi_status status; | |
1518 | struct SPMITable *spmi; | |
1519 | char *io_type; | |
1520 | u8 addr_space; | |
1521 | ||
1522 | if (acpi_failure) | |
1523 | return -ENODEV; | |
1524 | ||
1525 | status = acpi_get_firmware_table("SPMI", intf_num+1, | |
1526 | ACPI_LOGICAL_ADDRESSING, | |
1527 | (struct acpi_table_header **) &spmi); | |
1528 | if (status != AE_OK) { | |
1529 | acpi_failure = 1; | |
1530 | return -ENODEV; | |
1531 | } | |
1532 | ||
1533 | if (spmi->IPMIlegacy != 1) { | |
1534 | printk(KERN_INFO "IPMI: Bad SPMI legacy %d\n", spmi->IPMIlegacy); | |
1535 | return -ENODEV; | |
1536 | } | |
1537 | ||
1538 | if (spmi->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) | |
1539 | addr_space = IPMI_MEM_ADDR_SPACE; | |
1540 | else | |
1541 | addr_space = IPMI_IO_ADDR_SPACE; | |
1542 | if (!is_new_interface(-1, addr_space, spmi->addr.address)) | |
1543 | return -ENODEV; | |
1544 | ||
1545 | if (!spmi->addr.register_bit_width) { | |
1546 | acpi_failure = 1; | |
1547 | return -ENODEV; | |
1548 | } | |
1549 | ||
1550 | /* Figure out the interface type. */ | |
1551 | switch (spmi->InterfaceType) | |
1552 | { | |
1553 | case 1: /* KCS */ | |
1554 | si_type[intf_num] = "kcs"; | |
1555 | break; | |
1556 | ||
1557 | case 2: /* SMIC */ | |
1558 | si_type[intf_num] = "smic"; | |
1559 | break; | |
1560 | ||
1561 | case 3: /* BT */ | |
1562 | si_type[intf_num] = "bt"; | |
1563 | break; | |
1564 | ||
1565 | default: | |
1566 | printk(KERN_INFO "ipmi_si: Unknown ACPI/SPMI SI type %d\n", | |
1567 | spmi->InterfaceType); | |
1568 | return -EIO; | |
1569 | } | |
1570 | ||
1571 | info = kmalloc(sizeof(*info), GFP_KERNEL); | |
1572 | if (!info) { | |
1573 | printk(KERN_ERR "ipmi_si: Could not allocate SI data (3)\n"); | |
1574 | return -ENOMEM; | |
1575 | } | |
1576 | memset(info, 0, sizeof(*info)); | |
1577 | ||
1578 | if (spmi->InterruptType & 1) { | |
1579 | /* We've got a GPE interrupt. */ | |
1580 | info->irq = spmi->GPE; | |
1581 | info->irq_setup = acpi_gpe_irq_setup; | |
1582 | info->irq_cleanup = acpi_gpe_irq_cleanup; | |
1583 | } else if (spmi->InterruptType & 2) { | |
1584 | /* We've got an APIC/SAPIC interrupt. */ | |
1585 | info->irq = spmi->GlobalSystemInterrupt; | |
1586 | info->irq_setup = std_irq_setup; | |
1587 | info->irq_cleanup = std_irq_cleanup; | |
1588 | } else { | |
1589 | /* Use the default interrupt setting. */ | |
1590 | info->irq = 0; | |
1591 | info->irq_setup = NULL; | |
1592 | } | |
1593 | ||
35bc37a0 CM |
1594 | if (spmi->addr.register_bit_width) { |
1595 | /* A (hopefully) properly formed register bit width. */ | |
1596 | regspacings[intf_num] = spmi->addr.register_bit_width / 8; | |
1597 | info->io.regspacing = spmi->addr.register_bit_width / 8; | |
1598 | } else { | |
1599 | /* Some broken systems get this wrong and set the value | |
1600 | * to zero. Assume it is the default spacing. If that | |
1601 | * is wrong, too bad, the vendor should fix the tables. */ | |
1602 | regspacings[intf_num] = DEFAULT_REGSPACING; | |
1603 | info->io.regspacing = DEFAULT_REGSPACING; | |
1604 | } | |
1da177e4 LT |
1605 | regsizes[intf_num] = regspacings[intf_num]; |
1606 | info->io.regsize = regsizes[intf_num]; | |
1607 | regshifts[intf_num] = spmi->addr.register_bit_offset; | |
1608 | info->io.regshift = regshifts[intf_num]; | |
1609 | ||
1610 | if (spmi->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { | |
1611 | io_type = "memory"; | |
1612 | info->io_setup = mem_setup; | |
1613 | addrs[intf_num] = spmi->addr.address; | |
1614 | info->io.info = &(addrs[intf_num]); | |
1615 | } else if (spmi->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_IO) { | |
1616 | io_type = "I/O"; | |
1617 | info->io_setup = port_setup; | |
1618 | ports[intf_num] = spmi->addr.address; | |
1619 | info->io.info = &(ports[intf_num]); | |
1620 | } else { | |
1621 | kfree(info); | |
1622 | printk("ipmi_si: Unknown ACPI I/O Address type\n"); | |
1623 | return -EIO; | |
1624 | } | |
1625 | ||
1626 | *new_info = info; | |
1627 | ||
1628 | printk("ipmi_si: ACPI/SPMI specifies \"%s\" %s SI @ 0x%lx\n", | |
1629 | si_type[intf_num], io_type, (unsigned long) spmi->addr.address); | |
1630 | return 0; | |
1631 | } | |
1632 | #endif | |
1633 | ||
1634 | #ifdef CONFIG_X86 | |
1635 | typedef struct dmi_ipmi_data | |
1636 | { | |
1637 | u8 type; | |
1638 | u8 addr_space; | |
1639 | unsigned long base_addr; | |
1640 | u8 irq; | |
1641 | u8 offset; | |
1642 | u8 slave_addr; | |
1643 | } dmi_ipmi_data_t; | |
1644 | ||
1645 | static dmi_ipmi_data_t dmi_data[SI_MAX_DRIVERS]; | |
1646 | static int dmi_data_entries; | |
1647 | ||
b224cd3a | 1648 | static int __init decode_dmi(struct dmi_header *dm, int intf_num) |
1da177e4 | 1649 | { |
b224cd3a | 1650 | u8 *data = (u8 *)dm; |
1da177e4 LT |
1651 | unsigned long base_addr; |
1652 | u8 reg_spacing; | |
b224cd3a | 1653 | u8 len = dm->length; |
1da177e4 LT |
1654 | dmi_ipmi_data_t *ipmi_data = dmi_data+intf_num; |
1655 | ||
b224cd3a | 1656 | ipmi_data->type = data[4]; |
1da177e4 LT |
1657 | |
1658 | memcpy(&base_addr, data+8, sizeof(unsigned long)); | |
1659 | if (len >= 0x11) { | |
1660 | if (base_addr & 1) { | |
1661 | /* I/O */ | |
1662 | base_addr &= 0xFFFE; | |
1663 | ipmi_data->addr_space = IPMI_IO_ADDR_SPACE; | |
1664 | } | |
1665 | else { | |
1666 | /* Memory */ | |
1667 | ipmi_data->addr_space = IPMI_MEM_ADDR_SPACE; | |
1668 | } | |
1669 | /* If bit 4 of byte 0x10 is set, then the lsb for the address | |
1670 | is odd. */ | |
b224cd3a | 1671 | ipmi_data->base_addr = base_addr | ((data[0x10] & 0x10) >> 4); |
1da177e4 | 1672 | |
b224cd3a | 1673 | ipmi_data->irq = data[0x11]; |
1da177e4 LT |
1674 | |
1675 | /* The top two bits of byte 0x10 hold the register spacing. */ | |
b224cd3a | 1676 | reg_spacing = (data[0x10] & 0xC0) >> 6; |
1da177e4 LT |
1677 | switch(reg_spacing){ |
1678 | case 0x00: /* Byte boundaries */ | |
1679 | ipmi_data->offset = 1; | |
1680 | break; | |
1681 | case 0x01: /* 32-bit boundaries */ | |
1682 | ipmi_data->offset = 4; | |
1683 | break; | |
1684 | case 0x02: /* 16-byte boundaries */ | |
1685 | ipmi_data->offset = 16; | |
1686 | break; | |
1687 | default: | |
1688 | /* Some other interface, just ignore it. */ | |
1689 | return -EIO; | |
1690 | } | |
1691 | } else { | |
1692 | /* Old DMI spec. */ | |
92068801 CM |
1693 | /* Note that technically, the lower bit of the base |
1694 | * address should be 1 if the address is I/O and 0 if | |
1695 | * the address is in memory. So many systems get that | |
1696 | * wrong (and all that I have seen are I/O) so we just | |
1697 | * ignore that bit and assume I/O. Systems that use | |
1698 | * memory should use the newer spec, anyway. */ | |
1699 | ipmi_data->base_addr = base_addr & 0xfffe; | |
1da177e4 LT |
1700 | ipmi_data->addr_space = IPMI_IO_ADDR_SPACE; |
1701 | ipmi_data->offset = 1; | |
1702 | } | |
1703 | ||
b224cd3a | 1704 | ipmi_data->slave_addr = data[6]; |
1da177e4 LT |
1705 | |
1706 | if (is_new_interface(-1, ipmi_data->addr_space,ipmi_data->base_addr)) { | |
1707 | dmi_data_entries++; | |
1708 | return 0; | |
1709 | } | |
1710 | ||
1711 | memset(ipmi_data, 0, sizeof(dmi_ipmi_data_t)); | |
1712 | ||
1713 | return -1; | |
1714 | } | |
1715 | ||
b224cd3a | 1716 | static void __init dmi_find_bmc(void) |
1da177e4 | 1717 | { |
b224cd3a AP |
1718 | struct dmi_device *dev = NULL; |
1719 | int intf_num = 0; | |
1da177e4 | 1720 | |
b224cd3a AP |
1721 | while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev))) { |
1722 | if (intf_num >= SI_MAX_DRIVERS) | |
1723 | break; | |
1da177e4 | 1724 | |
b224cd3a | 1725 | decode_dmi((struct dmi_header *) dev->device_data, intf_num++); |
1da177e4 | 1726 | } |
1da177e4 LT |
1727 | } |
1728 | ||
1729 | static int try_init_smbios(int intf_num, struct smi_info **new_info) | |
1730 | { | |
1731 | struct smi_info *info; | |
1732 | dmi_ipmi_data_t *ipmi_data = dmi_data+intf_num; | |
1733 | char *io_type; | |
1734 | ||
1735 | if (intf_num >= dmi_data_entries) | |
1736 | return -ENODEV; | |
1737 | ||
1738 | switch(ipmi_data->type) { | |
1739 | case 0x01: /* KCS */ | |
1740 | si_type[intf_num] = "kcs"; | |
1741 | break; | |
1742 | case 0x02: /* SMIC */ | |
1743 | si_type[intf_num] = "smic"; | |
1744 | break; | |
1745 | case 0x03: /* BT */ | |
1746 | si_type[intf_num] = "bt"; | |
1747 | break; | |
1748 | default: | |
1749 | return -EIO; | |
1750 | } | |
1751 | ||
1752 | info = kmalloc(sizeof(*info), GFP_KERNEL); | |
1753 | if (!info) { | |
1754 | printk(KERN_ERR "ipmi_si: Could not allocate SI data (4)\n"); | |
1755 | return -ENOMEM; | |
1756 | } | |
1757 | memset(info, 0, sizeof(*info)); | |
1758 | ||
1759 | if (ipmi_data->addr_space == 1) { | |
1760 | io_type = "memory"; | |
1761 | info->io_setup = mem_setup; | |
1762 | addrs[intf_num] = ipmi_data->base_addr; | |
1763 | info->io.info = &(addrs[intf_num]); | |
1764 | } else if (ipmi_data->addr_space == 2) { | |
1765 | io_type = "I/O"; | |
1766 | info->io_setup = port_setup; | |
1767 | ports[intf_num] = ipmi_data->base_addr; | |
1768 | info->io.info = &(ports[intf_num]); | |
1769 | } else { | |
1770 | kfree(info); | |
1771 | printk("ipmi_si: Unknown SMBIOS I/O Address type.\n"); | |
1772 | return -EIO; | |
1773 | } | |
1774 | ||
1775 | regspacings[intf_num] = ipmi_data->offset; | |
1776 | info->io.regspacing = regspacings[intf_num]; | |
1777 | if (!info->io.regspacing) | |
1778 | info->io.regspacing = DEFAULT_REGSPACING; | |
1779 | info->io.regsize = DEFAULT_REGSPACING; | |
1780 | info->io.regshift = regshifts[intf_num]; | |
1781 | ||
1782 | info->slave_addr = ipmi_data->slave_addr; | |
1783 | ||
1784 | irqs[intf_num] = ipmi_data->irq; | |
1785 | ||
1786 | *new_info = info; | |
1787 | ||
1788 | printk("ipmi_si: Found SMBIOS-specified state machine at %s" | |
1789 | " address 0x%lx, slave address 0x%x\n", | |
1790 | io_type, (unsigned long)ipmi_data->base_addr, | |
1791 | ipmi_data->slave_addr); | |
1792 | return 0; | |
1793 | } | |
1794 | #endif /* CONFIG_X86 */ | |
1795 | ||
1796 | #ifdef CONFIG_PCI | |
1797 | ||
1798 | #define PCI_ERMC_CLASSCODE 0x0C0700 | |
1799 | #define PCI_HP_VENDOR_ID 0x103C | |
1800 | #define PCI_MMC_DEVICE_ID 0x121A | |
1801 | #define PCI_MMC_ADDR_CW 0x10 | |
1802 | ||
1803 | /* Avoid more than one attempt to probe pci smic. */ | |
1804 | static int pci_smic_checked = 0; | |
1805 | ||
1806 | static int find_pci_smic(int intf_num, struct smi_info **new_info) | |
1807 | { | |
1808 | struct smi_info *info; | |
1809 | int error; | |
1810 | struct pci_dev *pci_dev = NULL; | |
1811 | u16 base_addr; | |
1812 | int fe_rmc = 0; | |
1813 | ||
1814 | if (pci_smic_checked) | |
1815 | return -ENODEV; | |
1816 | ||
1817 | pci_smic_checked = 1; | |
1818 | ||
1819 | if ((pci_dev = pci_get_device(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID, | |
1820 | NULL))) | |
1821 | ; | |
1822 | else if ((pci_dev = pci_get_class(PCI_ERMC_CLASSCODE, NULL)) && | |
1823 | pci_dev->subsystem_vendor == PCI_HP_VENDOR_ID) | |
1824 | fe_rmc = 1; | |
1825 | else | |
1826 | return -ENODEV; | |
1827 | ||
1828 | error = pci_read_config_word(pci_dev, PCI_MMC_ADDR_CW, &base_addr); | |
1829 | if (error) | |
1830 | { | |
1831 | pci_dev_put(pci_dev); | |
1832 | printk(KERN_ERR | |
1833 | "ipmi_si: pci_read_config_word() failed (%d).\n", | |
1834 | error); | |
1835 | return -ENODEV; | |
1836 | } | |
1837 | ||
1838 | /* Bit 0: 1 specifies programmed I/O, 0 specifies memory mapped I/O */ | |
1839 | if (!(base_addr & 0x0001)) | |
1840 | { | |
1841 | pci_dev_put(pci_dev); | |
1842 | printk(KERN_ERR | |
1843 | "ipmi_si: memory mapped I/O not supported for PCI" | |
1844 | " smic.\n"); | |
1845 | return -ENODEV; | |
1846 | } | |
1847 | ||
1848 | base_addr &= 0xFFFE; | |
1849 | if (!fe_rmc) | |
1850 | /* Data register starts at base address + 1 in eRMC */ | |
1851 | ++base_addr; | |
1852 | ||
1853 | if (!is_new_interface(-1, IPMI_IO_ADDR_SPACE, base_addr)) { | |
1854 | pci_dev_put(pci_dev); | |
1855 | return -ENODEV; | |
1856 | } | |
1857 | ||
1858 | info = kmalloc(sizeof(*info), GFP_KERNEL); | |
1859 | if (!info) { | |
1860 | pci_dev_put(pci_dev); | |
1861 | printk(KERN_ERR "ipmi_si: Could not allocate SI data (5)\n"); | |
1862 | return -ENOMEM; | |
1863 | } | |
1864 | memset(info, 0, sizeof(*info)); | |
1865 | ||
1866 | info->io_setup = port_setup; | |
1867 | ports[intf_num] = base_addr; | |
1868 | info->io.info = &(ports[intf_num]); | |
1869 | info->io.regspacing = regspacings[intf_num]; | |
1870 | if (!info->io.regspacing) | |
1871 | info->io.regspacing = DEFAULT_REGSPACING; | |
1872 | info->io.regsize = DEFAULT_REGSPACING; | |
1873 | info->io.regshift = regshifts[intf_num]; | |
1874 | ||
1875 | *new_info = info; | |
1876 | ||
1877 | irqs[intf_num] = pci_dev->irq; | |
1878 | si_type[intf_num] = "smic"; | |
1879 | ||
1880 | printk("ipmi_si: Found PCI SMIC at I/O address 0x%lx\n", | |
1881 | (long unsigned int) base_addr); | |
1882 | ||
1883 | pci_dev_put(pci_dev); | |
1884 | return 0; | |
1885 | } | |
1886 | #endif /* CONFIG_PCI */ | |
1887 | ||
1888 | static int try_init_plug_and_play(int intf_num, struct smi_info **new_info) | |
1889 | { | |
1890 | #ifdef CONFIG_PCI | |
1891 | if (find_pci_smic(intf_num, new_info)==0) | |
1892 | return 0; | |
1893 | #endif | |
1894 | /* Include other methods here. */ | |
1895 | ||
1896 | return -ENODEV; | |
1897 | } | |
1898 | ||
1899 | ||
1900 | static int try_get_dev_id(struct smi_info *smi_info) | |
1901 | { | |
1902 | unsigned char msg[2]; | |
1903 | unsigned char *resp; | |
1904 | unsigned long resp_len; | |
1905 | enum si_sm_result smi_result; | |
1906 | int rv = 0; | |
1907 | ||
1908 | resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL); | |
1909 | if (!resp) | |
1910 | return -ENOMEM; | |
1911 | ||
1912 | /* Do a Get Device ID command, since it comes back with some | |
1913 | useful info. */ | |
1914 | msg[0] = IPMI_NETFN_APP_REQUEST << 2; | |
1915 | msg[1] = IPMI_GET_DEVICE_ID_CMD; | |
1916 | smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2); | |
1917 | ||
1918 | smi_result = smi_info->handlers->event(smi_info->si_sm, 0); | |
1919 | for (;;) | |
1920 | { | |
1921 | if (smi_result == SI_SM_CALL_WITH_DELAY) { | |
1922 | set_current_state(TASK_UNINTERRUPTIBLE); | |
1923 | schedule_timeout(1); | |
1924 | smi_result = smi_info->handlers->event( | |
1925 | smi_info->si_sm, 100); | |
1926 | } | |
1927 | else if (smi_result == SI_SM_CALL_WITHOUT_DELAY) | |
1928 | { | |
1929 | smi_result = smi_info->handlers->event( | |
1930 | smi_info->si_sm, 0); | |
1931 | } | |
1932 | else | |
1933 | break; | |
1934 | } | |
1935 | if (smi_result == SI_SM_HOSED) { | |
1936 | /* We couldn't get the state machine to run, so whatever's at | |
1937 | the port is probably not an IPMI SMI interface. */ | |
1938 | rv = -ENODEV; | |
1939 | goto out; | |
1940 | } | |
1941 | ||
1942 | /* Otherwise, we got some data. */ | |
1943 | resp_len = smi_info->handlers->get_result(smi_info->si_sm, | |
1944 | resp, IPMI_MAX_MSG_LENGTH); | |
1945 | if (resp_len < 6) { | |
1946 | /* That's odd, it should be longer. */ | |
1947 | rv = -EINVAL; | |
1948 | goto out; | |
1949 | } | |
1950 | ||
1951 | if ((resp[1] != IPMI_GET_DEVICE_ID_CMD) || (resp[2] != 0)) { | |
1952 | /* That's odd, it shouldn't be able to fail. */ | |
1953 | rv = -EINVAL; | |
1954 | goto out; | |
1955 | } | |
1956 | ||
1957 | /* Record info from the get device id, in case we need it. */ | |
3ae0e0f9 CM |
1958 | memcpy(&smi_info->device_id, &resp[3], |
1959 | min_t(unsigned long, resp_len-3, sizeof(smi_info->device_id))); | |
1da177e4 LT |
1960 | |
1961 | out: | |
1962 | kfree(resp); | |
1963 | return rv; | |
1964 | } | |
1965 | ||
1966 | static int type_file_read_proc(char *page, char **start, off_t off, | |
1967 | int count, int *eof, void *data) | |
1968 | { | |
1969 | char *out = (char *) page; | |
1970 | struct smi_info *smi = data; | |
1971 | ||
1972 | switch (smi->si_type) { | |
1973 | case SI_KCS: | |
1974 | return sprintf(out, "kcs\n"); | |
1975 | case SI_SMIC: | |
1976 | return sprintf(out, "smic\n"); | |
1977 | case SI_BT: | |
1978 | return sprintf(out, "bt\n"); | |
1979 | default: | |
1980 | return 0; | |
1981 | } | |
1982 | } | |
1983 | ||
1984 | static int stat_file_read_proc(char *page, char **start, off_t off, | |
1985 | int count, int *eof, void *data) | |
1986 | { | |
1987 | char *out = (char *) page; | |
1988 | struct smi_info *smi = data; | |
1989 | ||
1990 | out += sprintf(out, "interrupts_enabled: %d\n", | |
1991 | smi->irq && !smi->interrupt_disabled); | |
1992 | out += sprintf(out, "short_timeouts: %ld\n", | |
1993 | smi->short_timeouts); | |
1994 | out += sprintf(out, "long_timeouts: %ld\n", | |
1995 | smi->long_timeouts); | |
1996 | out += sprintf(out, "timeout_restarts: %ld\n", | |
1997 | smi->timeout_restarts); | |
1998 | out += sprintf(out, "idles: %ld\n", | |
1999 | smi->idles); | |
2000 | out += sprintf(out, "interrupts: %ld\n", | |
2001 | smi->interrupts); | |
2002 | out += sprintf(out, "attentions: %ld\n", | |
2003 | smi->attentions); | |
2004 | out += sprintf(out, "flag_fetches: %ld\n", | |
2005 | smi->flag_fetches); | |
2006 | out += sprintf(out, "hosed_count: %ld\n", | |
2007 | smi->hosed_count); | |
2008 | out += sprintf(out, "complete_transactions: %ld\n", | |
2009 | smi->complete_transactions); | |
2010 | out += sprintf(out, "events: %ld\n", | |
2011 | smi->events); | |
2012 | out += sprintf(out, "watchdog_pretimeouts: %ld\n", | |
2013 | smi->watchdog_pretimeouts); | |
2014 | out += sprintf(out, "incoming_messages: %ld\n", | |
2015 | smi->incoming_messages); | |
2016 | ||
2017 | return (out - ((char *) page)); | |
2018 | } | |
2019 | ||
3ae0e0f9 CM |
2020 | /* |
2021 | * oem_data_avail_to_receive_msg_avail | |
2022 | * @info - smi_info structure with msg_flags set | |
2023 | * | |
2024 | * Converts flags from OEM_DATA_AVAIL to RECEIVE_MSG_AVAIL | |
2025 | * Returns 1 indicating need to re-run handle_flags(). | |
2026 | */ | |
2027 | static int oem_data_avail_to_receive_msg_avail(struct smi_info *smi_info) | |
2028 | { | |
2029 | smi_info->msg_flags = (smi_info->msg_flags & ~OEM_DATA_AVAIL) | | |
2030 | RECEIVE_MSG_AVAIL; | |
2031 | return 1; | |
2032 | } | |
2033 | ||
2034 | /* | |
2035 | * setup_dell_poweredge_oem_data_handler | |
2036 | * @info - smi_info.device_id must be populated | |
2037 | * | |
2038 | * Systems that match, but have firmware version < 1.40 may assert | |
2039 | * OEM0_DATA_AVAIL on their own, without being told via Set Flags that | |
2040 | * it's safe to do so. Such systems will de-assert OEM1_DATA_AVAIL | |
2041 | * upon receipt of IPMI_GET_MSG_CMD, so we should treat these flags | |
2042 | * as RECEIVE_MSG_AVAIL instead. | |
2043 | * | |
2044 | * As Dell has no plans to release IPMI 1.5 firmware that *ever* | |
2045 | * assert the OEM[012] bits, and if it did, the driver would have to | |
2046 | * change to handle that properly, we don't actually check for the | |
2047 | * firmware version. | |
2048 | * Device ID = 0x20 BMC on PowerEdge 8G servers | |
2049 | * Device Revision = 0x80 | |
2050 | * Firmware Revision1 = 0x01 BMC version 1.40 | |
2051 | * Firmware Revision2 = 0x40 BCD encoded | |
2052 | * IPMI Version = 0x51 IPMI 1.5 | |
2053 | * Manufacturer ID = A2 02 00 Dell IANA | |
2054 | * | |
2055 | */ | |
2056 | #define DELL_POWEREDGE_8G_BMC_DEVICE_ID 0x20 | |
2057 | #define DELL_POWEREDGE_8G_BMC_DEVICE_REV 0x80 | |
2058 | #define DELL_POWEREDGE_8G_BMC_IPMI_VERSION 0x51 | |
2059 | #define DELL_IANA_MFR_ID {0xA2, 0x02, 0x00} | |
2060 | static void setup_dell_poweredge_oem_data_handler(struct smi_info *smi_info) | |
2061 | { | |
2062 | struct ipmi_device_id *id = &smi_info->device_id; | |
2063 | const char mfr[3]=DELL_IANA_MFR_ID; | |
2064 | if (!memcmp(mfr, id->manufacturer_id, sizeof(mfr)) && | |
2065 | id->device_id == DELL_POWEREDGE_8G_BMC_DEVICE_ID && | |
2066 | id->device_revision == DELL_POWEREDGE_8G_BMC_DEVICE_REV && | |
2067 | id->ipmi_version == DELL_POWEREDGE_8G_BMC_IPMI_VERSION) { | |
2068 | smi_info->oem_data_avail_handler = | |
2069 | oem_data_avail_to_receive_msg_avail; | |
2070 | } | |
2071 | } | |
2072 | ||
2073 | /* | |
2074 | * setup_oem_data_handler | |
2075 | * @info - smi_info.device_id must be filled in already | |
2076 | * | |
2077 | * Fills in smi_info.device_id.oem_data_available_handler | |
2078 | * when we know what function to use there. | |
2079 | */ | |
2080 | ||
2081 | static void setup_oem_data_handler(struct smi_info *smi_info) | |
2082 | { | |
2083 | setup_dell_poweredge_oem_data_handler(smi_info); | |
2084 | } | |
2085 | ||
1da177e4 LT |
2086 | /* Returns 0 if initialized, or negative on an error. */ |
2087 | static int init_one_smi(int intf_num, struct smi_info **smi) | |
2088 | { | |
2089 | int rv; | |
2090 | struct smi_info *new_smi; | |
2091 | ||
2092 | ||
2093 | rv = try_init_mem(intf_num, &new_smi); | |
2094 | if (rv) | |
2095 | rv = try_init_port(intf_num, &new_smi); | |
2096 | #ifdef CONFIG_ACPI_INTERPRETER | |
2097 | if ((rv) && (si_trydefaults)) { | |
2098 | rv = try_init_acpi(intf_num, &new_smi); | |
2099 | } | |
2100 | #endif | |
2101 | #ifdef CONFIG_X86 | |
2102 | if ((rv) && (si_trydefaults)) { | |
2103 | rv = try_init_smbios(intf_num, &new_smi); | |
2104 | } | |
2105 | #endif | |
2106 | if ((rv) && (si_trydefaults)) { | |
2107 | rv = try_init_plug_and_play(intf_num, &new_smi); | |
2108 | } | |
2109 | ||
2110 | ||
2111 | if (rv) | |
2112 | return rv; | |
2113 | ||
2114 | /* So we know not to free it unless we have allocated one. */ | |
2115 | new_smi->intf = NULL; | |
2116 | new_smi->si_sm = NULL; | |
2117 | new_smi->handlers = NULL; | |
2118 | ||
2119 | if (!new_smi->irq_setup) { | |
2120 | new_smi->irq = irqs[intf_num]; | |
2121 | new_smi->irq_setup = std_irq_setup; | |
2122 | new_smi->irq_cleanup = std_irq_cleanup; | |
2123 | } | |
2124 | ||
2125 | /* Default to KCS if no type is specified. */ | |
2126 | if (si_type[intf_num] == NULL) { | |
2127 | if (si_trydefaults) | |
2128 | si_type[intf_num] = "kcs"; | |
2129 | else { | |
2130 | rv = -EINVAL; | |
2131 | goto out_err; | |
2132 | } | |
2133 | } | |
2134 | ||
2135 | /* Set up the state machine to use. */ | |
2136 | if (strcmp(si_type[intf_num], "kcs") == 0) { | |
2137 | new_smi->handlers = &kcs_smi_handlers; | |
2138 | new_smi->si_type = SI_KCS; | |
2139 | } else if (strcmp(si_type[intf_num], "smic") == 0) { | |
2140 | new_smi->handlers = &smic_smi_handlers; | |
2141 | new_smi->si_type = SI_SMIC; | |
2142 | } else if (strcmp(si_type[intf_num], "bt") == 0) { | |
2143 | new_smi->handlers = &bt_smi_handlers; | |
2144 | new_smi->si_type = SI_BT; | |
2145 | } else { | |
2146 | /* No support for anything else yet. */ | |
2147 | rv = -EIO; | |
2148 | goto out_err; | |
2149 | } | |
2150 | ||
2151 | /* Allocate the state machine's data and initialize it. */ | |
2152 | new_smi->si_sm = kmalloc(new_smi->handlers->size(), GFP_KERNEL); | |
2153 | if (!new_smi->si_sm) { | |
2154 | printk(" Could not allocate state machine memory\n"); | |
2155 | rv = -ENOMEM; | |
2156 | goto out_err; | |
2157 | } | |
2158 | new_smi->io_size = new_smi->handlers->init_data(new_smi->si_sm, | |
2159 | &new_smi->io); | |
2160 | ||
2161 | /* Now that we know the I/O size, we can set up the I/O. */ | |
2162 | rv = new_smi->io_setup(new_smi); | |
2163 | if (rv) { | |
2164 | printk(" Could not set up I/O space\n"); | |
2165 | goto out_err; | |
2166 | } | |
2167 | ||
2168 | spin_lock_init(&(new_smi->si_lock)); | |
2169 | spin_lock_init(&(new_smi->msg_lock)); | |
2170 | spin_lock_init(&(new_smi->count_lock)); | |
2171 | ||
2172 | /* Do low-level detection first. */ | |
2173 | if (new_smi->handlers->detect(new_smi->si_sm)) { | |
2174 | rv = -ENODEV; | |
2175 | goto out_err; | |
2176 | } | |
2177 | ||
2178 | /* Attempt a get device id command. If it fails, we probably | |
2179 | don't have a SMI here. */ | |
2180 | rv = try_get_dev_id(new_smi); | |
2181 | if (rv) | |
2182 | goto out_err; | |
2183 | ||
3ae0e0f9 CM |
2184 | setup_oem_data_handler(new_smi); |
2185 | ||
1da177e4 LT |
2186 | /* Try to claim any interrupts. */ |
2187 | new_smi->irq_setup(new_smi); | |
2188 | ||
2189 | INIT_LIST_HEAD(&(new_smi->xmit_msgs)); | |
2190 | INIT_LIST_HEAD(&(new_smi->hp_xmit_msgs)); | |
2191 | new_smi->curr_msg = NULL; | |
2192 | atomic_set(&new_smi->req_events, 0); | |
2193 | new_smi->run_to_completion = 0; | |
2194 | ||
2195 | new_smi->interrupt_disabled = 0; | |
2196 | new_smi->timer_stopped = 0; | |
2197 | new_smi->stop_operation = 0; | |
2198 | ||
2199 | /* Start clearing the flags before we enable interrupts or the | |
2200 | timer to avoid racing with the timer. */ | |
2201 | start_clear_flags(new_smi); | |
2202 | /* IRQ is defined to be set when non-zero. */ | |
2203 | if (new_smi->irq) | |
2204 | new_smi->si_state = SI_CLEARING_FLAGS_THEN_SET_IRQ; | |
2205 | ||
2206 | /* The ipmi_register_smi() code does some operations to | |
2207 | determine the channel information, so we must be ready to | |
2208 | handle operations before it is called. This means we have | |
2209 | to stop the timer if we get an error after this point. */ | |
2210 | init_timer(&(new_smi->si_timer)); | |
2211 | new_smi->si_timer.data = (long) new_smi; | |
2212 | new_smi->si_timer.function = smi_timeout; | |
2213 | new_smi->last_timeout_jiffies = jiffies; | |
2214 | new_smi->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES; | |
2215 | add_timer(&(new_smi->si_timer)); | |
2216 | ||
2217 | rv = ipmi_register_smi(&handlers, | |
2218 | new_smi, | |
3ae0e0f9 CM |
2219 | ipmi_version_major(&new_smi->device_id), |
2220 | ipmi_version_minor(&new_smi->device_id), | |
1da177e4 LT |
2221 | new_smi->slave_addr, |
2222 | &(new_smi->intf)); | |
2223 | if (rv) { | |
2224 | printk(KERN_ERR | |
2225 | "ipmi_si: Unable to register device: error %d\n", | |
2226 | rv); | |
2227 | goto out_err_stop_timer; | |
2228 | } | |
2229 | ||
2230 | rv = ipmi_smi_add_proc_entry(new_smi->intf, "type", | |
2231 | type_file_read_proc, NULL, | |
2232 | new_smi, THIS_MODULE); | |
2233 | if (rv) { | |
2234 | printk(KERN_ERR | |
2235 | "ipmi_si: Unable to create proc entry: %d\n", | |
2236 | rv); | |
2237 | goto out_err_stop_timer; | |
2238 | } | |
2239 | ||
2240 | rv = ipmi_smi_add_proc_entry(new_smi->intf, "si_stats", | |
2241 | stat_file_read_proc, NULL, | |
2242 | new_smi, THIS_MODULE); | |
2243 | if (rv) { | |
2244 | printk(KERN_ERR | |
2245 | "ipmi_si: Unable to create proc entry: %d\n", | |
2246 | rv); | |
2247 | goto out_err_stop_timer; | |
2248 | } | |
2249 | ||
2250 | *smi = new_smi; | |
2251 | ||
2252 | printk(" IPMI %s interface initialized\n", si_type[intf_num]); | |
2253 | ||
2254 | return 0; | |
2255 | ||
2256 | out_err_stop_timer: | |
2257 | new_smi->stop_operation = 1; | |
2258 | ||
2259 | /* Wait for the timer to stop. This avoids problems with race | |
2260 | conditions removing the timer here. */ | |
2261 | while (!new_smi->timer_stopped) { | |
2262 | set_current_state(TASK_UNINTERRUPTIBLE); | |
2263 | schedule_timeout(1); | |
2264 | } | |
2265 | ||
2266 | out_err: | |
2267 | if (new_smi->intf) | |
2268 | ipmi_unregister_smi(new_smi->intf); | |
2269 | ||
2270 | new_smi->irq_cleanup(new_smi); | |
2271 | ||
2272 | /* Wait until we know that we are out of any interrupt | |
2273 | handlers might have been running before we freed the | |
2274 | interrupt. */ | |
fbd568a3 | 2275 | synchronize_sched(); |
1da177e4 LT |
2276 | |
2277 | if (new_smi->si_sm) { | |
2278 | if (new_smi->handlers) | |
2279 | new_smi->handlers->cleanup(new_smi->si_sm); | |
2280 | kfree(new_smi->si_sm); | |
2281 | } | |
2282 | new_smi->io_cleanup(new_smi); | |
2283 | ||
2284 | return rv; | |
2285 | } | |
2286 | ||
2287 | static __init int init_ipmi_si(void) | |
2288 | { | |
2289 | int rv = 0; | |
2290 | int pos = 0; | |
2291 | int i; | |
2292 | char *str; | |
2293 | ||
2294 | if (initialized) | |
2295 | return 0; | |
2296 | initialized = 1; | |
2297 | ||
2298 | /* Parse out the si_type string into its components. */ | |
2299 | str = si_type_str; | |
2300 | if (*str != '\0') { | |
2301 | for (i=0; (i<SI_MAX_PARMS) && (*str != '\0'); i++) { | |
2302 | si_type[i] = str; | |
2303 | str = strchr(str, ','); | |
2304 | if (str) { | |
2305 | *str = '\0'; | |
2306 | str++; | |
2307 | } else { | |
2308 | break; | |
2309 | } | |
2310 | } | |
2311 | } | |
2312 | ||
2313 | printk(KERN_INFO "IPMI System Interface driver version " | |
2314 | IPMI_SI_VERSION); | |
2315 | if (kcs_smi_handlers.version) | |
2316 | printk(", KCS version %s", kcs_smi_handlers.version); | |
2317 | if (smic_smi_handlers.version) | |
2318 | printk(", SMIC version %s", smic_smi_handlers.version); | |
2319 | if (bt_smi_handlers.version) | |
2320 | printk(", BT version %s", bt_smi_handlers.version); | |
2321 | printk("\n"); | |
2322 | ||
2323 | #ifdef CONFIG_X86 | |
b224cd3a | 2324 | dmi_find_bmc(); |
1da177e4 LT |
2325 | #endif |
2326 | ||
2327 | rv = init_one_smi(0, &(smi_infos[pos])); | |
2328 | if (rv && !ports[0] && si_trydefaults) { | |
2329 | /* If we are trying defaults and the initial port is | |
2330 | not set, then set it. */ | |
2331 | si_type[0] = "kcs"; | |
2332 | ports[0] = DEFAULT_KCS_IO_PORT; | |
2333 | rv = init_one_smi(0, &(smi_infos[pos])); | |
2334 | if (rv) { | |
2335 | /* No KCS - try SMIC */ | |
2336 | si_type[0] = "smic"; | |
2337 | ports[0] = DEFAULT_SMIC_IO_PORT; | |
2338 | rv = init_one_smi(0, &(smi_infos[pos])); | |
2339 | } | |
2340 | if (rv) { | |
2341 | /* No SMIC - try BT */ | |
2342 | si_type[0] = "bt"; | |
2343 | ports[0] = DEFAULT_BT_IO_PORT; | |
2344 | rv = init_one_smi(0, &(smi_infos[pos])); | |
2345 | } | |
2346 | } | |
2347 | if (rv == 0) | |
2348 | pos++; | |
2349 | ||
2350 | for (i=1; i < SI_MAX_PARMS; i++) { | |
2351 | rv = init_one_smi(i, &(smi_infos[pos])); | |
2352 | if (rv == 0) | |
2353 | pos++; | |
2354 | } | |
2355 | ||
2356 | if (smi_infos[0] == NULL) { | |
2357 | printk("ipmi_si: Unable to find any System Interface(s)\n"); | |
2358 | return -ENODEV; | |
2359 | } | |
2360 | ||
2361 | return 0; | |
2362 | } | |
2363 | module_init(init_ipmi_si); | |
2364 | ||
2365 | static void __exit cleanup_one_si(struct smi_info *to_clean) | |
2366 | { | |
2367 | int rv; | |
2368 | unsigned long flags; | |
2369 | ||
2370 | if (! to_clean) | |
2371 | return; | |
2372 | ||
2373 | /* Tell the timer and interrupt handlers that we are shutting | |
2374 | down. */ | |
2375 | spin_lock_irqsave(&(to_clean->si_lock), flags); | |
2376 | spin_lock(&(to_clean->msg_lock)); | |
2377 | ||
2378 | to_clean->stop_operation = 1; | |
2379 | ||
2380 | to_clean->irq_cleanup(to_clean); | |
2381 | ||
2382 | spin_unlock(&(to_clean->msg_lock)); | |
2383 | spin_unlock_irqrestore(&(to_clean->si_lock), flags); | |
2384 | ||
2385 | /* Wait until we know that we are out of any interrupt | |
2386 | handlers might have been running before we freed the | |
2387 | interrupt. */ | |
fbd568a3 | 2388 | synchronize_sched(); |
1da177e4 LT |
2389 | |
2390 | /* Wait for the timer to stop. This avoids problems with race | |
2391 | conditions removing the timer here. */ | |
2392 | while (!to_clean->timer_stopped) { | |
2393 | set_current_state(TASK_UNINTERRUPTIBLE); | |
2394 | schedule_timeout(1); | |
2395 | } | |
2396 | ||
2397 | /* Interrupts and timeouts are stopped, now make sure the | |
2398 | interface is in a clean state. */ | |
2399 | while ((to_clean->curr_msg) || (to_clean->si_state != SI_NORMAL)) { | |
2400 | poll(to_clean); | |
2401 | set_current_state(TASK_UNINTERRUPTIBLE); | |
2402 | schedule_timeout(1); | |
2403 | } | |
2404 | ||
2405 | rv = ipmi_unregister_smi(to_clean->intf); | |
2406 | if (rv) { | |
2407 | printk(KERN_ERR | |
2408 | "ipmi_si: Unable to unregister device: errno=%d\n", | |
2409 | rv); | |
2410 | } | |
2411 | ||
2412 | to_clean->handlers->cleanup(to_clean->si_sm); | |
2413 | ||
2414 | kfree(to_clean->si_sm); | |
2415 | ||
2416 | to_clean->io_cleanup(to_clean); | |
2417 | } | |
2418 | ||
2419 | static __exit void cleanup_ipmi_si(void) | |
2420 | { | |
2421 | int i; | |
2422 | ||
2423 | if (!initialized) | |
2424 | return; | |
2425 | ||
2426 | for (i=0; i<SI_MAX_DRIVERS; i++) { | |
2427 | cleanup_one_si(smi_infos[i]); | |
2428 | } | |
2429 | } | |
2430 | module_exit(cleanup_ipmi_si); | |
2431 | ||
2432 | MODULE_LICENSE("GPL"); |