Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | #undef BLOCKMOVE |
2 | #define Z_WAKE | |
3 | #undef Z_EXT_CHARS_IN_BUFFER | |
1da177e4 LT |
4 | |
5 | /* | |
6 | * linux/drivers/char/cyclades.c | |
7 | * | |
8 | * This file contains the driver for the Cyclades async multiport | |
9 | * serial boards. | |
10 | * | |
11 | * Initially written by Randolph Bentson <bentson@grieg.seaslug.org>. | |
12 | * Modified and maintained by Marcio Saito <marcio@cyclades.com>. | |
1da177e4 | 13 | * |
c8e1693a | 14 | * Copyright (C) 2007 Jiri Slaby <jirislaby@gmail.com> |
1da177e4 LT |
15 | * |
16 | * Much of the design and some of the code came from serial.c | |
17 | * which was copyright (C) 1991, 1992 Linus Torvalds. It was | |
18 | * extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92, | |
19 | * and then fixed as suggested by Michael K. Johnson 12/12/92. | |
c8e1693a | 20 | * Converted to pci probing and cleaned up by Jiri Slaby. |
1da177e4 LT |
21 | * |
22 | * This version supports shared IRQ's (only for PCI boards). | |
23 | * | |
24 | * $Log: cyclades.c,v $ | |
25 | * Prevent users from opening non-existing Z ports. | |
26 | * | |
27 | * Revision 2.3.2.8 2000/07/06 18:14:16 ivan | |
28 | * Fixed the PCI detection function to work properly on Alpha systems. | |
29 | * Implemented support for TIOCSERGETLSR ioctl. | |
30 | * Implemented full support for non-standard baud rates. | |
31 | * | |
32 | * Revision 2.3.2.7 2000/06/01 18:26:34 ivan | |
33 | * Request PLX I/O region, although driver doesn't use it, to avoid | |
34 | * problems with other drivers accessing it. | |
35 | * Removed count for on-board buffer characters in cy_chars_in_buffer | |
36 | * (Cyclades-Z only). | |
37 | * | |
38 | * Revision 2.3.2.6 2000/05/05 13:56:05 ivan | |
39 | * Driver now reports physical instead of virtual memory addresses. | |
40 | * Masks were added to some Cyclades-Z read accesses. | |
41 | * Implemented workaround for PLX9050 bug that would cause a system lockup | |
42 | * in certain systems, depending on the MMIO addresses allocated to the | |
43 | * board. | |
44 | * Changed the Tx interrupt programming in the CD1400 chips to boost up | |
45 | * performance (Cyclom-Y only). | |
46 | * Code is now compliant with the new module interface (module_[init|exit]). | |
47 | * Make use of the PCI helper functions to access PCI resources. | |
48 | * Did some code "housekeeping". | |
49 | * | |
50 | * Revision 2.3.2.5 2000/01/19 14:35:33 ivan | |
51 | * Fixed bug in cy_set_termios on CRTSCTS flag turnoff. | |
52 | * | |
53 | * Revision 2.3.2.4 2000/01/17 09:19:40 ivan | |
54 | * Fixed SMP locking in Cyclom-Y interrupt handler. | |
55 | * | |
56 | * Revision 2.3.2.3 1999/12/28 12:11:39 ivan | |
57 | * Added a new cyclades_card field called nports to allow the driver to | |
58 | * know the exact number of ports found by the Z firmware after its load; | |
59 | * RX buffer contention prevention logic on interrupt op mode revisited | |
60 | * (Cyclades-Z only); | |
61 | * Revisited printk's for Z debug; | |
62 | * Driver now makes sure that the constant SERIAL_XMIT_SIZE is defined; | |
63 | * | |
64 | * Revision 2.3.2.2 1999/10/01 11:27:43 ivan | |
65 | * Fixed bug in cyz_poll that would make all ports but port 0 | |
66 | * unable to transmit/receive data (Cyclades-Z only); | |
67 | * Implemented logic to prevent the RX buffer from being stuck with data | |
68 | * due to a driver / firmware race condition in interrupt op mode | |
69 | * (Cyclades-Z only); | |
70 | * Fixed bug in block_til_ready logic that would lead to a system crash; | |
71 | * Revisited cy_close spinlock usage; | |
72 | * | |
73 | * Revision 2.3.2.1 1999/09/28 11:01:22 ivan | |
74 | * Revisited CONFIG_PCI conditional compilation for PCI board support; | |
75 | * Implemented TIOCGICOUNT and TIOCMIWAIT ioctl support; | |
76 | * _Major_ cleanup on the Cyclades-Z interrupt support code / logic; | |
77 | * Removed CTS handling from the driver -- this is now completely handled | |
78 | * by the firmware (Cyclades-Z only); | |
79 | * Flush RX on-board buffers on a port open (Cyclades-Z only); | |
80 | * Fixed handling of ASYNC_SPD_* TTY flags; | |
81 | * Module unload now unmaps all memory area allocated by ioremap; | |
82 | * | |
83 | * Revision 2.3.1.1 1999/07/15 16:45:53 ivan | |
84 | * Removed CY_PROC conditional compilation; | |
85 | * Implemented SMP-awareness for the driver; | |
86 | * Implemented a new ISA IRQ autoprobe that uses the irq_probe_[on|off] | |
87 | * functions; | |
88 | * The driver now accepts memory addresses (maddr=0xMMMMM) and IRQs | |
89 | * (irq=NN) as parameters (only for ISA boards); | |
90 | * Fixed bug in set_line_char that would prevent the Cyclades-Z | |
91 | * ports from being configured at speeds above 115.2Kbps; | |
92 | * Fixed bug in cy_set_termios that would prevent XON/XOFF flow control | |
93 | * switching from working properly; | |
94 | * The driver now only prints IRQ info for the Cyclades-Z if it's | |
95 | * configured to work in interrupt mode; | |
96 | * | |
97 | * Revision 2.2.2.3 1999/06/28 11:13:29 ivan | |
98 | * Added support for interrupt mode operation for the Z cards; | |
99 | * Removed the driver inactivity control for the Z; | |
100 | * Added a missing MOD_DEC_USE_COUNT in the cy_open function for when | |
101 | * the Z firmware is not loaded yet; | |
102 | * Replaced the "manual" Z Tx flush buffer by a call to a FW command of | |
103 | * same functionality; | |
104 | * Implemented workaround for IRQ setting loss on the PCI configuration | |
105 | * registers after a PCI bridge EEPROM reload (affects PLX9060 only); | |
106 | * | |
107 | * Revision 2.2.2.2 1999/05/14 17:18:15 ivan | |
108 | * /proc entry location changed to /proc/tty/driver/cyclades; | |
109 | * Added support to shared IRQ's (only for PCI boards); | |
110 | * Added support for Cobalt Qube2 systems; | |
111 | * IRQ [de]allocation scheme revisited; | |
112 | * BREAK implementation changed in order to make use of the 'break_ctl' | |
113 | * TTY facility; | |
114 | * Fixed typo in TTY structure field 'driver_name'; | |
115 | * Included a PCI bridge reset and EEPROM reload in the board | |
116 | * initialization code (for both Y and Z series). | |
117 | * | |
118 | * Revision 2.2.2.1 1999/04/08 16:17:43 ivan | |
119 | * Fixed a bug in cy_wait_until_sent that was preventing the port to be | |
120 | * closed properly after a SIGINT; | |
121 | * Module usage counter scheme revisited; | |
122 | * Added support to the upcoming Y PCI boards (i.e., support to additional | |
123 | * PCI Device ID's). | |
124 | * | |
125 | * Revision 2.2.1.10 1999/01/20 16:14:29 ivan | |
126 | * Removed all unnecessary page-alignement operations in ioremap calls | |
127 | * (ioremap is currently safe for these operations). | |
128 | * | |
129 | * Revision 2.2.1.9 1998/12/30 18:18:30 ivan | |
130 | * Changed access to PLX PCI bridge registers from I/O to MMIO, in | |
131 | * order to make PLX9050-based boards work with certain motherboards. | |
132 | * | |
133 | * Revision 2.2.1.8 1998/11/13 12:46:20 ivan | |
134 | * cy_close function now resets (correctly) the tty->closing flag; | |
135 | * JIFFIES_DIFF macro fixed. | |
136 | * | |
137 | * Revision 2.2.1.7 1998/09/03 12:07:28 ivan | |
138 | * Fixed bug in cy_close function, which was not informing HW of | |
139 | * which port should have the reception disabled before doing so; | |
140 | * fixed Cyclom-8YoP hardware detection bug. | |
141 | * | |
142 | * Revision 2.2.1.6 1998/08/20 17:15:39 ivan | |
143 | * Fixed bug in cy_close function, which causes malfunction | |
144 | * of one of the first 4 ports when a higher port is closed | |
145 | * (Cyclom-Y only). | |
146 | * | |
147 | * Revision 2.2.1.5 1998/08/10 18:10:28 ivan | |
148 | * Fixed Cyclom-4Yo hardware detection bug. | |
149 | * | |
150 | * Revision 2.2.1.4 1998/08/04 11:02:50 ivan | |
151 | * /proc/cyclades implementation with great collaboration of | |
152 | * Marc Lewis <marc@blarg.net>; | |
153 | * cyy_interrupt was changed to avoid occurrence of kernel oopses | |
154 | * during PPP operation. | |
155 | * | |
156 | * Revision 2.2.1.3 1998/06/01 12:09:10 ivan | |
157 | * General code review in order to comply with 2.1 kernel standards; | |
158 | * data loss prevention for slow devices revisited (cy_wait_until_sent | |
159 | * was created); | |
160 | * removed conditional compilation for new/old PCI structure support | |
161 | * (now the driver only supports the new PCI structure). | |
162 | * | |
163 | * Revision 2.2.1.1 1998/03/19 16:43:12 ivan | |
164 | * added conditional compilation for new/old PCI structure support; | |
165 | * removed kernel series (2.0.x / 2.1.x) conditional compilation. | |
166 | * | |
167 | * Revision 2.1.1.3 1998/03/16 18:01:12 ivan | |
168 | * cleaned up the data loss fix; | |
169 | * fixed XON/XOFF handling once more (Cyclades-Z); | |
170 | * general review of the driver routines; | |
171 | * introduction of a mechanism to prevent data loss with slow | |
172 | * printers, by forcing a delay before closing the port. | |
173 | * | |
174 | * Revision 2.1.1.2 1998/02/17 16:50:00 ivan | |
175 | * fixed detection/handling of new CD1400 in Ye boards; | |
176 | * fixed XON/XOFF handling (Cyclades-Z); | |
177 | * fixed data loss caused by a premature port close; | |
178 | * introduction of a flag that holds the CD1400 version ID per port | |
179 | * (used by the CYGETCD1400VER new ioctl). | |
180 | * | |
181 | * Revision 2.1.1.1 1997/12/03 17:31:19 ivan | |
182 | * Code review for the module cleanup routine; | |
183 | * fixed RTS and DTR status report for new CD1400's in get_modem_info; | |
184 | * includes anonymous changes regarding signal_pending. | |
185 | * | |
186 | * Revision 2.1 1997/11/01 17:42:41 ivan | |
187 | * Changes in the driver to support Alpha systems (except 8Zo V_1); | |
188 | * BREAK fix for the Cyclades-Z boards; | |
189 | * driver inactivity control by FW implemented; | |
190 | * introduction of flag that allows driver to take advantage of | |
191 | * a special CD1400 feature related to HW flow control; | |
192 | * added support for the CD1400 rev. J (Cyclom-Y boards); | |
193 | * introduction of ioctls to: | |
194 | * - control the rtsdtr_inv flag (Cyclom-Y); | |
195 | * - control the rflow flag (Cyclom-Y); | |
196 | * - adjust the polling interval (Cyclades-Z); | |
197 | * | |
198 | * Revision 1.36.4.33 1997/06/27 19:00:00 ivan | |
199 | * Fixes related to kernel version conditional | |
200 | * compilation. | |
201 | * | |
202 | * Revision 1.36.4.32 1997/06/14 19:30:00 ivan | |
203 | * Compatibility issues between kernels 2.0.x and | |
204 | * 2.1.x (mainly related to clear_bit function). | |
205 | * | |
206 | * Revision 1.36.4.31 1997/06/03 15:30:00 ivan | |
207 | * Changes to define the memory window according to the | |
208 | * board type. | |
209 | * | |
210 | * Revision 1.36.4.30 1997/05/16 15:30:00 daniel | |
211 | * Changes to support new cycladesZ boards. | |
212 | * | |
213 | * Revision 1.36.4.29 1997/05/12 11:30:00 daniel | |
214 | * Merge of Bentson's and Daniel's version 1.36.4.28. | |
215 | * Corrects bug in cy_detect_pci: check if there are more | |
216 | * ports than the number of static structs allocated. | |
217 | * Warning message during initialization if this driver is | |
218 | * used with the new generation of cycladesZ boards. Those | |
219 | * will be supported only in next release of the driver. | |
220 | * Corrects bug in cy_detect_pci and cy_detect_isa that | |
221 | * returned wrong number of VALID boards, when a cyclomY | |
222 | * was found with no serial modules connected. | |
223 | * Changes to use current (2.1.x) kernel subroutine names | |
224 | * and created macros for compilation with 2.0.x kernel, | |
225 | * instead of the other way around. | |
226 | * | |
227 | * Revision 1.36.4.28 1997/05/?? ??:00:00 bentson | |
228 | * Change queue_task_irq_off to queue_task_irq. | |
229 | * The inline function queue_task_irq_off (tqueue.h) | |
230 | * was removed from latest releases of 2.1.x kernel. | |
231 | * Use of macro __init to mark the initialization | |
232 | * routines, so memory can be reused. | |
233 | * Also incorporate implementation of critical region | |
234 | * in function cleanup_module() created by anonymous | |
235 | * linuxer. | |
236 | * | |
237 | * Revision 1.36.4.28 1997/04/25 16:00:00 daniel | |
238 | * Change to support new firmware that solves DCD problem: | |
239 | * application could fail to receive SIGHUP signal when DCD | |
240 | * varying too fast. | |
241 | * | |
242 | * Revision 1.36.4.27 1997/03/26 10:30:00 daniel | |
243 | * Changed for support linux versions 2.1.X. | |
244 | * Backward compatible with linux versions 2.0.X. | |
245 | * Corrected illegal use of filler field in | |
246 | * CH_CTRL struct. | |
247 | * Deleted some debug messages. | |
248 | * | |
249 | * Revision 1.36.4.26 1997/02/27 12:00:00 daniel | |
250 | * Included check for NULL tty pointer in cyz_poll. | |
251 | * | |
252 | * Revision 1.36.4.25 1997/02/26 16:28:30 bentson | |
253 | * Bill Foster at Blarg! Online services noticed that | |
254 | * some of the switch elements of -Z modem control | |
255 | * lacked a closing "break;" | |
256 | * | |
257 | * Revision 1.36.4.24 1997/02/24 11:00:00 daniel | |
258 | * Changed low water threshold for buffer xmit_buf | |
259 | * | |
260 | * Revision 1.36.4.23 1996/12/02 21:50:16 bentson | |
261 | * Marcio provided fix to modem status fetch for -Z | |
262 | * | |
263 | * Revision 1.36.4.22 1996/10/28 22:41:17 bentson | |
264 | * improve mapping of -Z control page (thanks to Steve | |
265 | * Price <stevep@fa.tdktca.com> for help on this) | |
266 | * | |
267 | * Revision 1.36.4.21 1996/09/10 17:00:10 bentson | |
268 | * shift from CPU-bound to memcopy in cyz_polling operation | |
269 | * | |
270 | * Revision 1.36.4.20 1996/09/09 18:30:32 Bentson | |
271 | * Added support to set and report higher speeds. | |
272 | * | |
273 | * Revision 1.36.4.19c 1996/08/09 10:00:00 Marcio Saito | |
274 | * Some fixes in the HW flow control for the BETA release. | |
275 | * Don't try to register the IRQ. | |
276 | * | |
277 | * Revision 1.36.4.19 1996/08/08 16:23:18 Bentson | |
278 | * make sure "cyc" appears in all kernel messages; all soft interrupts | |
279 | * handled by same routine; recognize out-of-band reception; comment | |
280 | * out some diagnostic messages; leave RTS/CTS flow control to hardware; | |
33430dc5 | 281 | * fix race condition in -Z buffer management; only -Y needs to explicitly |
1da177e4 LT |
282 | * flush chars; tidy up some startup messages; |
283 | * | |
284 | * Revision 1.36.4.18 1996/07/25 18:57:31 bentson | |
285 | * shift MOD_INC_USE_COUNT location to match | |
286 | * serial.c; purge some diagnostic messages; | |
287 | * | |
288 | * Revision 1.36.4.17 1996/07/25 18:01:08 bentson | |
289 | * enable modem status messages and fetch & process them; note | |
290 | * time of last activity type for each port; set_line_char now | |
291 | * supports more than line 0 and treats 0 baud correctly; | |
292 | * get_modem_info senses rs_status; | |
293 | * | |
294 | * Revision 1.36.4.16 1996/07/20 08:43:15 bentson | |
295 | * barely works--now's time to turn on | |
296 | * more features 'til it breaks | |
297 | * | |
298 | * Revision 1.36.4.15 1996/07/19 22:30:06 bentson | |
299 | * check more -Z board status; shorten boot message | |
300 | * | |
301 | * Revision 1.36.4.14 1996/07/19 22:20:37 bentson | |
302 | * fix reference to ch_ctrl in startup; verify return | |
303 | * values from cyz_issue_cmd and cyz_update_channel; | |
304 | * more stuff to get modem control correct; | |
305 | * | |
306 | * Revision 1.36.4.13 1996/07/11 19:53:33 bentson | |
307 | * more -Z stuff folded in; re-order changes to put -Z stuff | |
308 | * after -Y stuff (to make changes clearer) | |
309 | * | |
310 | * Revision 1.36.4.12 1996/07/11 15:40:55 bentson | |
311 | * Add code to poll Cyclades-Z. Add code to get & set RS-232 control. | |
312 | * Add code to send break. Clear firmware ID word at startup (so | |
313 | * that other code won't talk to inactive board). | |
314 | * | |
315 | * Revision 1.36.4.11 1996/07/09 05:28:29 bentson | |
316 | * add code for -Z in set_line_char | |
317 | * | |
318 | * Revision 1.36.4.10 1996/07/08 19:28:37 bentson | |
319 | * fold more -Z stuff (or in some cases, error messages) | |
320 | * into driver; add text to "don't know what to do" messages. | |
321 | * | |
322 | * Revision 1.36.4.9 1996/07/08 18:38:38 bentson | |
323 | * moved compile-time flags near top of file; cosmetic changes | |
324 | * to narrow text (to allow 2-up printing); changed many declarations | |
325 | * to "static" to limit external symbols; shuffled code order to | |
326 | * coalesce -Y and -Z specific code, also to put internal functions | |
327 | * in order of tty_driver structure; added code to recognize -Z | |
328 | * ports (and for moment, do nothing or report error); add cy_startup | |
329 | * to parse boot command line for extra base addresses for ISA probes; | |
330 | * | |
331 | * Revision 1.36.4.8 1996/06/25 17:40:19 bentson | |
332 | * reorder some code, fix types of some vars (int vs. long), | |
333 | * add cy_setup to support user declared ISA addresses | |
334 | * | |
335 | * Revision 1.36.4.7 1996/06/21 23:06:18 bentson | |
336 | * dump ioctl based firmware load (it's now a user level | |
337 | * program); ensure uninitialzed ports cannot be used | |
338 | * | |
339 | * Revision 1.36.4.6 1996/06/20 23:17:19 bentson | |
340 | * rename vars and restructure some code | |
341 | * | |
342 | * Revision 1.36.4.5 1996/06/14 15:09:44 bentson | |
343 | * get right status back after boot load | |
344 | * | |
345 | * Revision 1.36.4.4 1996/06/13 19:51:44 bentson | |
346 | * successfully loads firmware | |
347 | * | |
348 | * Revision 1.36.4.3 1996/06/13 06:08:33 bentson | |
349 | * add more of the code for the boot/load ioctls | |
350 | * | |
351 | * Revision 1.36.4.2 1996/06/11 21:00:51 bentson | |
352 | * start to add Z functionality--starting with ioctl | |
353 | * for loading firmware | |
354 | * | |
355 | * Revision 1.36.4.1 1996/06/10 18:03:02 bentson | |
356 | * added code to recognize Z/PCI card at initialization; report | |
357 | * presence, but card is not initialized (because firmware needs | |
358 | * to be loaded) | |
359 | * | |
360 | * Revision 1.36.3.8 1996/06/07 16:29:00 bentson | |
361 | * starting minor number at zero; added missing verify_area | |
362 | * as noted by Heiko Eissfeldt <heiko@colossus.escape.de> | |
363 | * | |
364 | * Revision 1.36.3.7 1996/04/19 21:06:18 bentson | |
365 | * remove unneeded boot message & fix CLOCAL hardware flow | |
366 | * control (Miquel van Smoorenburg <miquels@Q.cistron.nl>); | |
367 | * remove unused diagnostic statements; minor 0 is first; | |
368 | * | |
369 | * Revision 1.36.3.6 1996/03/13 13:21:17 marcio | |
370 | * The kernel function vremap (available only in later 1.3.xx kernels) | |
371 | * allows the access to memory addresses above the RAM. This revision | |
372 | * of the driver supports PCI boards below 1Mb (device id 0x100) and | |
373 | * above 1Mb (device id 0x101). | |
374 | * | |
375 | * Revision 1.36.3.5 1996/03/07 15:20:17 bentson | |
376 | * Some global changes to interrupt handling spilled into | |
377 | * this driver--mostly unused arguments in system function | |
378 | * calls. Also added change by Marcio Saito which should | |
379 | * reduce lost interrupts at startup by fast processors. | |
380 | * | |
381 | * Revision 1.36.3.4 1995/11/13 20:45:10 bentson | |
382 | * Changes by Corey Minyard <minyard@wf-rch.cirr.com> distributed | |
383 | * in 1.3.41 kernel to remove a possible race condition, extend | |
384 | * some error messages, and let the driver run as a loadable module | |
385 | * Change by Alan Wendt <alan@ez0.ezlink.com> to remove a | |
386 | * possible race condition. | |
387 | * Change by Marcio Saito <marcio@cyclades.com> to fix PCI addressing. | |
388 | * | |
389 | * Revision 1.36.3.3 1995/11/13 19:44:48 bentson | |
390 | * Changes by Linus Torvalds in 1.3.33 kernel distribution | |
391 | * required due to reordering of driver initialization. | |
392 | * Drivers are now initialized *after* memory management. | |
393 | * | |
394 | * Revision 1.36.3.2 1995/09/08 22:07:14 bentson | |
395 | * remove printk from ISR; fix typo | |
396 | * | |
397 | * Revision 1.36.3.1 1995/09/01 12:00:42 marcio | |
398 | * Minor fixes in the PCI board support. PCI function calls in | |
399 | * conditional compilation (CONFIG_PCI). Thanks to Jim Duncan | |
400 | * <duncan@okay.com>. "bad serial count" message removed. | |
401 | * | |
402 | * Revision 1.36.3 1995/08/22 09:19:42 marcio | |
403 | * Cyclom-Y/PCI support added. Changes in the cy_init routine and | |
404 | * board initialization. Changes in the boot messages. The driver | |
405 | * supports up to 4 boards and 64 ports by default. | |
406 | * | |
407 | * Revision 1.36.1.4 1995/03/29 06:14:14 bentson | |
408 | * disambiguate between Cyclom-16Y and Cyclom-32Ye; | |
409 | * | |
410 | * Revision 1.36.1.3 1995/03/23 22:15:35 bentson | |
411 | * add missing break in modem control block in ioctl switch statement | |
412 | * (discovered by Michael Edward Chastain <mec@jobe.shell.portal.com>); | |
413 | * | |
414 | * Revision 1.36.1.2 1995/03/22 19:16:22 bentson | |
415 | * make sure CTS flow control is set as soon as possible (thanks | |
416 | * to note from David Lambert <lambert@chesapeake.rps.slb.com>); | |
417 | * | |
418 | * Revision 1.36.1.1 1995/03/13 15:44:43 bentson | |
419 | * initialize defaults for receive threshold and stale data timeout; | |
420 | * cosmetic changes; | |
421 | * | |
422 | * Revision 1.36 1995/03/10 23:33:53 bentson | |
423 | * added support of chips 4-7 in 32 port Cyclom-Ye; | |
424 | * fix cy_interrupt pointer dereference problem | |
425 | * (Joe Portman <baron@aa.net>); | |
426 | * give better error response if open is attempted on non-existent port | |
427 | * (Zachariah Vaum <jchryslr@netcom.com>); | |
428 | * correct command timeout (Kenneth Lerman <lerman@@seltd.newnet.com>); | |
429 | * conditional compilation for -16Y on systems with fast, noisy bus; | |
430 | * comment out diagnostic print function; | |
431 | * cleaned up table of base addresses; | |
432 | * set receiver time-out period register to correct value, | |
433 | * set receive threshold to better default values, | |
434 | * set chip timer to more accurate 200 Hz ticking, | |
435 | * add code to monitor and modify receive parameters | |
436 | * (Rik Faith <faith@cs.unc.edu> Nick Simicich | |
437 | * <njs@scifi.emi.net>); | |
438 | * | |
439 | * Revision 1.35 1994/12/16 13:54:18 steffen | |
440 | * additional patch by Marcio Saito for board detection | |
441 | * Accidently left out in 1.34 | |
442 | * | |
443 | * Revision 1.34 1994/12/10 12:37:12 steffen | |
444 | * This is the corrected version as suggested by Marcio Saito | |
445 | * | |
446 | * Revision 1.33 1994/12/01 22:41:18 bentson | |
447 | * add hooks to support more high speeds directly; add tytso | |
448 | * patch regarding CLOCAL wakeups | |
449 | * | |
450 | * Revision 1.32 1994/11/23 19:50:04 bentson | |
451 | * allow direct kernel control of higher signalling rates; | |
452 | * look for cards at additional locations | |
453 | * | |
454 | * Revision 1.31 1994/11/16 04:33:28 bentson | |
455 | * ANOTHER fix from Corey Minyard, minyard@wf-rch.cirr.com-- | |
456 | * a problem in chars_in_buffer has been resolved by some | |
457 | * small changes; this should yield smoother output | |
458 | * | |
459 | * Revision 1.30 1994/11/16 04:28:05 bentson | |
460 | * Fix from Corey Minyard, Internet: minyard@metronet.com, | |
461 | * UUCP: minyard@wf-rch.cirr.com, WORK: minyardbnr.ca, to | |
462 | * cy_hangup that appears to clear up much (all?) of the | |
463 | * DTR glitches; also he's added/cleaned-up diagnostic messages | |
464 | * | |
465 | * Revision 1.29 1994/11/16 04:16:07 bentson | |
466 | * add change proposed by Ralph Sims, ralphs@halcyon.com, to | |
467 | * operate higher speeds in same way as other serial ports; | |
468 | * add more serial ports (for up to two 16-port muxes). | |
469 | * | |
470 | * Revision 1.28 1994/11/04 00:13:16 root | |
471 | * turn off diagnostic messages | |
472 | * | |
473 | * Revision 1.27 1994/11/03 23:46:37 root | |
474 | * bunch of changes to bring driver into greater conformance | |
475 | * with the serial.c driver (looking for missed fixes) | |
476 | * | |
477 | * Revision 1.26 1994/11/03 22:40:36 root | |
478 | * automatic interrupt probing fixed. | |
479 | * | |
480 | * Revision 1.25 1994/11/03 20:17:02 root | |
481 | * start to implement auto-irq | |
482 | * | |
483 | * Revision 1.24 1994/11/03 18:01:55 root | |
484 | * still working on modem signals--trying not to drop DTR | |
485 | * during the getty/login processes | |
486 | * | |
487 | * Revision 1.23 1994/11/03 17:51:36 root | |
488 | * extend baud rate support; set receive threshold as function | |
489 | * of baud rate; fix some problems with RTS/CTS; | |
490 | * | |
491 | * Revision 1.22 1994/11/02 18:05:35 root | |
492 | * changed arguments to udelay to type long to get | |
493 | * delays to be of correct duration | |
494 | * | |
495 | * Revision 1.21 1994/11/02 17:37:30 root | |
496 | * employ udelay (after calibrating loops_per_second earlier | |
497 | * in init/main.c) instead of using home-grown delay routines | |
498 | * | |
499 | * Revision 1.20 1994/11/02 03:11:38 root | |
500 | * cy_chars_in_buffer forces a return value of 0 to let | |
501 | * login work (don't know why it does); some functions | |
502 | * that were returning EFAULT, now executes the code; | |
503 | * more work on deciding when to disable xmit interrupts; | |
504 | * | |
505 | * Revision 1.19 1994/11/01 20:10:14 root | |
506 | * define routine to start transmission interrupts (by enabling | |
507 | * transmit interrupts); directly enable/disable modem interrupts; | |
508 | * | |
509 | * Revision 1.18 1994/11/01 18:40:45 bentson | |
510 | * Don't always enable transmit interrupts in startup; interrupt on | |
511 | * TxMpty instead of TxRdy to help characters get out before shutdown; | |
512 | * restructure xmit interrupt to check for chars first and quit if | |
513 | * none are ready to go; modem status (MXVRx) is upright, _not_ inverted | |
514 | * (to my view); | |
515 | * | |
516 | * Revision 1.17 1994/10/30 04:39:45 bentson | |
517 | * rename serial_driver and callout_driver to cy_serial_driver and | |
518 | * cy_callout_driver to avoid linkage interference; initialize | |
519 | * info->type to PORT_CIRRUS; ruggedize paranoia test; elide ->port | |
520 | * from cyclades_port structure; add paranoia check to cy_close; | |
521 | * | |
522 | * Revision 1.16 1994/10/30 01:14:33 bentson | |
523 | * change major numbers; add some _early_ return statements; | |
524 | * | |
525 | * Revision 1.15 1994/10/29 06:43:15 bentson | |
526 | * final tidying up for clean compile; enable some error reporting | |
527 | * | |
528 | * Revision 1.14 1994/10/28 20:30:22 Bentson | |
529 | * lots of changes to drag the driver towards the new tty_io | |
530 | * structures and operation. not expected to work, but may | |
531 | * compile cleanly. | |
532 | * | |
533 | * Revision 1.13 1994/07/21 23:08:57 Bentson | |
534 | * add some diagnostic cruft; support 24 lines (for testing | |
535 | * both -8Y and -16Y cards; be more thorough in servicing all | |
536 | * chips during interrupt; add "volatile" a few places to | |
537 | * circumvent compiler optimizations; fix base & offset | |
538 | * computations in block_til_ready (was causing chip 0 to | |
539 | * stop operation) | |
540 | * | |
541 | * Revision 1.12 1994/07/19 16:42:11 Bentson | |
542 | * add some hackery for kernel version 1.1.8; expand | |
543 | * error messages; refine timing for delay loops and | |
544 | * declare loop params volatile | |
545 | * | |
546 | * Revision 1.11 1994/06/11 21:53:10 bentson | |
547 | * get use of save_car right in transmit interrupt service | |
548 | * | |
549 | * Revision 1.10.1.1 1994/06/11 21:31:18 bentson | |
550 | * add some diagnostic printing; try to fix save_car stuff | |
551 | * | |
552 | * Revision 1.10 1994/06/11 20:36:08 bentson | |
553 | * clean up compiler warnings | |
554 | * | |
555 | * Revision 1.9 1994/06/11 19:42:46 bentson | |
556 | * added a bunch of code to support modem signalling | |
557 | * | |
558 | * Revision 1.8 1994/06/11 17:57:07 bentson | |
559 | * recognize break & parity error | |
560 | * | |
561 | * Revision 1.7 1994/06/05 05:51:34 bentson | |
562 | * Reorder baud table to be monotonic; add cli to CP; discard | |
563 | * incoming characters and status if the line isn't open; start to | |
564 | * fold code into cy_throttle; start to port get_serial_info, | |
565 | * set_serial_info, get_modem_info, set_modem_info, and send_break | |
566 | * from serial.c; expand cy_ioctl; relocate and expand config_setup; | |
567 | * get flow control characters from tty struct; invalidate ports w/o | |
568 | * hardware; | |
569 | * | |
570 | * Revision 1.6 1994/05/31 18:42:21 bentson | |
571 | * add a loop-breaker in the interrupt service routine; | |
572 | * note when port is initialized so that it can be shut | |
573 | * down under the right conditions; receive works without | |
574 | * any obvious errors | |
575 | * | |
576 | * Revision 1.5 1994/05/30 00:55:02 bentson | |
577 | * transmit works without obvious errors | |
578 | * | |
579 | * Revision 1.4 1994/05/27 18:46:27 bentson | |
580 | * incorporated more code from lib_y.c; can now print short | |
581 | * strings under interrupt control to port zero; seems to | |
582 | * select ports/channels/lines correctly | |
583 | * | |
584 | * Revision 1.3 1994/05/25 22:12:44 bentson | |
585 | * shifting from multi-port on a card to proper multiplexor | |
586 | * data structures; added skeletons of most routines | |
587 | * | |
588 | * Revision 1.2 1994/05/19 13:21:43 bentson | |
589 | * start to crib from other sources | |
590 | * | |
591 | */ | |
592 | ||
c8e1693a | 593 | #define CY_VERSION "2.5" |
096dcfce | 594 | |
1da177e4 LT |
595 | /* If you need to install more boards than NR_CARDS, change the constant |
596 | in the definition below. No other change is necessary to support up to | |
597 | eight boards. Beyond that you'll have to extend cy_isa_addresses. */ | |
598 | ||
02f1175c | 599 | #define NR_CARDS 4 |
1da177e4 LT |
600 | |
601 | /* | |
602 | If the total number of ports is larger than NR_PORTS, change this | |
603 | constant in the definition below. No other change is necessary to | |
604 | support more boards/ports. */ | |
605 | ||
02f1175c | 606 | #define NR_PORTS 256 |
1da177e4 LT |
607 | |
608 | #define ZE_V1_NPORTS 64 | |
609 | #define ZO_V1 0 | |
610 | #define ZO_V2 1 | |
611 | #define ZE_V1 2 | |
612 | ||
613 | #define SERIAL_PARANOIA_CHECK | |
614 | #undef CY_DEBUG_OPEN | |
615 | #undef CY_DEBUG_THROTTLE | |
616 | #undef CY_DEBUG_OTHER | |
617 | #undef CY_DEBUG_IO | |
618 | #undef CY_DEBUG_COUNT | |
619 | #undef CY_DEBUG_DTR | |
620 | #undef CY_DEBUG_WAIT_UNTIL_SENT | |
621 | #undef CY_DEBUG_INTERRUPTS | |
622 | #undef CY_16Y_HACK | |
623 | #undef CY_ENABLE_MONITORING | |
624 | #undef CY_PCI_DEBUG | |
625 | ||
1da177e4 LT |
626 | /* |
627 | * Include section | |
628 | */ | |
1da177e4 LT |
629 | #include <linux/module.h> |
630 | #include <linux/errno.h> | |
631 | #include <linux/signal.h> | |
632 | #include <linux/sched.h> | |
633 | #include <linux/timer.h> | |
634 | #include <linux/interrupt.h> | |
635 | #include <linux/tty.h> | |
33f0f88f | 636 | #include <linux/tty_flip.h> |
1da177e4 LT |
637 | #include <linux/serial.h> |
638 | #include <linux/major.h> | |
639 | #include <linux/string.h> | |
640 | #include <linux/fcntl.h> | |
641 | #include <linux/ptrace.h> | |
642 | #include <linux/cyclades.h> | |
643 | #include <linux/mm.h> | |
644 | #include <linux/ioport.h> | |
645 | #include <linux/init.h> | |
646 | #include <linux/delay.h> | |
647 | #include <linux/spinlock.h> | |
648 | #include <linux/bitops.h> | |
649 | ||
650 | #include <asm/system.h> | |
651 | #include <asm/io.h> | |
652 | #include <asm/irq.h> | |
653 | #include <asm/uaccess.h> | |
654 | ||
1da177e4 LT |
655 | #include <linux/kernel.h> |
656 | #include <linux/pci.h> | |
657 | ||
658 | #include <linux/stat.h> | |
659 | #include <linux/proc_fs.h> | |
660 | ||
02f1175c JS |
661 | static void cy_throttle(struct tty_struct *tty); |
662 | static void cy_send_xchar(struct tty_struct *tty, char ch); | |
1da177e4 LT |
663 | |
664 | #define IS_CYC_Z(card) ((card).num_chips == -1) | |
665 | ||
666 | #define Z_FPGA_CHECK(card) \ | |
db05c3b1 | 667 | ((readl(&((struct RUNTIME_9060 __iomem *) \ |
02f1175c | 668 | ((card).ctl_addr))->init_ctrl) & (1<<17)) != 0) |
1da177e4 | 669 | |
db05c3b1 | 670 | #define ISZLOADED(card) (((ZO_V1==readl(&((struct RUNTIME_9060 __iomem *) \ |
1da177e4 LT |
671 | ((card).ctl_addr))->mail_box_0)) || \ |
672 | Z_FPGA_CHECK(card)) && \ | |
db05c3b1 | 673 | (ZFIRM_ID==readl(&((struct FIRM_ID __iomem *) \ |
1da177e4 LT |
674 | ((card).base_addr+ID_ADDRESS))->signature))) |
675 | ||
676 | #ifndef SERIAL_XMIT_SIZE | |
677 | #define SERIAL_XMIT_SIZE (min(PAGE_SIZE, 4096)) | |
678 | #endif | |
679 | #define WAKEUP_CHARS 256 | |
680 | ||
681 | #define STD_COM_FLAGS (0) | |
682 | ||
1da177e4 LT |
683 | static struct tty_driver *cy_serial_driver; |
684 | ||
685 | #ifdef CONFIG_ISA | |
686 | /* This is the address lookup table. The driver will probe for | |
687 | Cyclom-Y/ISA boards at all addresses in here. If you want the | |
688 | driver to probe addresses at a different address, add it to | |
689 | this table. If the driver is probing some other board and | |
690 | causing problems, remove the offending address from this table. | |
691 | The cy_setup function extracts additional addresses from the | |
692 | boot options line. The form is "cyclades=address,address..." | |
693 | */ | |
694 | ||
695 | static unsigned int cy_isa_addresses[] = { | |
02f1175c JS |
696 | 0xD0000, |
697 | 0xD2000, | |
698 | 0xD4000, | |
699 | 0xD6000, | |
700 | 0xD8000, | |
701 | 0xDA000, | |
702 | 0xDC000, | |
703 | 0xDE000, | |
704 | 0, 0, 0, 0, 0, 0, 0, 0 | |
1da177e4 | 705 | }; |
02f1175c | 706 | |
fe971071 | 707 | #define NR_ISA_ADDRS ARRAY_SIZE(cy_isa_addresses) |
1da177e4 LT |
708 | |
709 | #ifdef MODULE | |
3046d50e JS |
710 | static long maddr[NR_CARDS]; |
711 | static int irq[NR_CARDS]; | |
1da177e4 LT |
712 | |
713 | module_param_array(maddr, long, NULL, 0); | |
714 | module_param_array(irq, int, NULL, 0); | |
715 | #endif | |
716 | ||
02f1175c | 717 | #endif /* CONFIG_ISA */ |
1da177e4 LT |
718 | |
719 | /* This is the per-card data structure containing address, irq, number of | |
720 | channels, etc. This driver supports a maximum of NR_CARDS cards. | |
721 | */ | |
722 | static struct cyclades_card cy_card[NR_CARDS]; | |
723 | ||
02f1175c | 724 | static int cy_next_channel; /* next minor available */ |
1da177e4 | 725 | |
1da177e4 LT |
726 | /* |
727 | * This is used to look up the divisor speeds and the timeouts | |
728 | * We're normally limited to 15 distinct baud rates. The extra | |
729 | * are accessed via settings in info->flags. | |
730 | * 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, | |
731 | * 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, | |
732 | * HI VHI | |
733 | * 20 | |
734 | */ | |
735 | static int baud_table[] = { | |
02f1175c JS |
736 | 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, |
737 | 1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000, | |
738 | 230400, 0 | |
739 | }; | |
740 | ||
741 | static char baud_co_25[] = { /* 25 MHz clock option table */ | |
742 | /* value => 00 01 02 03 04 */ | |
743 | /* divide by 8 32 128 512 2048 */ | |
744 | 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02, | |
745 | 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 | |
746 | }; | |
747 | ||
748 | static char baud_bpr_25[] = { /* 25 MHz baud rate period table */ | |
749 | 0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3, | |
750 | 0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15 | |
751 | }; | |
752 | ||
753 | static char baud_co_60[] = { /* 60 MHz clock option table (CD1400 J) */ | |
754 | /* value => 00 01 02 03 04 */ | |
755 | /* divide by 8 32 128 512 2048 */ | |
756 | 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, | |
757 | 0x03, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, | |
758 | 0x00 | |
759 | }; | |
760 | ||
761 | static char baud_bpr_60[] = { /* 60 MHz baud rate period table (CD1400 J) */ | |
762 | 0x00, 0x82, 0x21, 0xff, 0xdb, 0xc3, 0x92, 0x62, 0xc3, 0x62, | |
763 | 0x41, 0xc3, 0x62, 0xc3, 0x62, 0xc3, 0x82, 0x62, 0x41, 0x32, | |
764 | 0x21 | |
765 | }; | |
766 | ||
767 | static char baud_cor3[] = { /* receive threshold */ | |
768 | 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, | |
769 | 0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07, | |
770 | 0x07 | |
771 | }; | |
1da177e4 LT |
772 | |
773 | /* | |
774 | * The Cyclades driver implements HW flow control as any serial driver. | |
775 | * The cyclades_port structure member rflow and the vector rflow_thr | |
776 | * allows us to take advantage of a special feature in the CD1400 to avoid | |
777 | * data loss even when the system interrupt latency is too high. These flags | |
778 | * are to be used only with very special applications. Setting these flags | |
779 | * requires the use of a special cable (DTR and RTS reversed). In the new | |
780 | * CD1400-based boards (rev. 6.00 or later), there is no need for special | |
781 | * cables. | |
782 | */ | |
783 | ||
02f1175c JS |
784 | static char rflow_thr[] = { /* rflow threshold */ |
785 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
786 | 0x00, 0x00, 0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, | |
787 | 0x0a | |
788 | }; | |
1da177e4 LT |
789 | |
790 | /* The Cyclom-Ye has placed the sequential chips in non-sequential | |
791 | * address order. This look-up table overcomes that problem. | |
792 | */ | |
02f1175c JS |
793 | static int cy_chip_offset[] = { 0x0000, |
794 | 0x0400, | |
795 | 0x0800, | |
796 | 0x0C00, | |
797 | 0x0200, | |
798 | 0x0600, | |
799 | 0x0A00, | |
800 | 0x0E00 | |
801 | }; | |
1da177e4 LT |
802 | |
803 | /* PCI related definitions */ | |
804 | ||
1da177e4 | 805 | #ifdef CONFIG_PCI |
893de2df JS |
806 | static struct pci_device_id cy_pci_dev_id[] __devinitdata = { |
807 | { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Lo) }, /* PCI < 1Mb */ | |
808 | { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Hi) }, /* PCI > 1Mb */ | |
809 | { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Lo) }, /* 4Y PCI < 1Mb */ | |
810 | { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Hi) }, /* 4Y PCI > 1Mb */ | |
811 | { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Lo) }, /* 8Y PCI < 1Mb */ | |
812 | { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Hi) }, /* 8Y PCI > 1Mb */ | |
813 | { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Lo) }, /* Z PCI < 1Mb */ | |
814 | { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Hi) }, /* Z PCI > 1Mb */ | |
815 | { } /* end of table */ | |
02f1175c | 816 | }; |
893de2df | 817 | MODULE_DEVICE_TABLE(pci, cy_pci_dev_id); |
1da177e4 LT |
818 | #endif |
819 | ||
820 | static void cy_start(struct tty_struct *); | |
821 | static void set_line_char(struct cyclades_port *); | |
1a86b5e3 | 822 | static int cyz_issue_cmd(struct cyclades_card *, __u32, __u8, __u32); |
1da177e4 LT |
823 | #ifdef CONFIG_ISA |
824 | static unsigned detect_isa_irq(void __iomem *); | |
02f1175c | 825 | #endif /* CONFIG_ISA */ |
1da177e4 | 826 | |
02f1175c | 827 | static int cyclades_get_proc_info(char *, char **, off_t, int, int *, void *); |
1da177e4 LT |
828 | |
829 | #ifndef CONFIG_CYZ_INTR | |
830 | static void cyz_poll(unsigned long); | |
831 | ||
832 | /* The Cyclades-Z polling cycle is defined by this variable */ | |
833 | static long cyz_polling_cycle = CZ_DEF_POLL; | |
834 | ||
8d06afab | 835 | static DEFINE_TIMER(cyz_timerlist, cyz_poll, 0, 0); |
1da177e4 | 836 | |
02f1175c | 837 | #else /* CONFIG_CYZ_INTR */ |
1da177e4 LT |
838 | static void cyz_rx_restart(unsigned long); |
839 | static struct timer_list cyz_rx_full_timer[NR_PORTS]; | |
02f1175c | 840 | #endif /* CONFIG_CYZ_INTR */ |
1da177e4 | 841 | |
02f1175c JS |
842 | static inline int serial_paranoia_check(struct cyclades_port *info, |
843 | char *name, const char *routine) | |
1da177e4 LT |
844 | { |
845 | #ifdef SERIAL_PARANOIA_CHECK | |
02f1175c | 846 | if (!info) { |
21719191 JS |
847 | printk(KERN_WARNING "cyc Warning: null cyclades_port for (%s) " |
848 | "in %s\n", name, routine); | |
02f1175c JS |
849 | return 1; |
850 | } | |
851 | ||
02f1175c | 852 | if (info->magic != CYCLADES_MAGIC) { |
21719191 JS |
853 | printk(KERN_WARNING "cyc Warning: bad magic number for serial " |
854 | "struct (%s) in %s\n", name, routine); | |
02f1175c JS |
855 | return 1; |
856 | } | |
1da177e4 | 857 | #endif |
02f1175c JS |
858 | return 0; |
859 | } /* serial_paranoia_check */ | |
1da177e4 LT |
860 | |
861 | /* | |
862 | * This routine is used by the interrupt handler to schedule | |
863 | * processing in the software interrupt portion of the driver | |
864 | * (also known as the "bottom half"). This can be called any | |
865 | * number of times for any channel without harm. | |
866 | */ | |
02f1175c | 867 | static inline void cy_sched_event(struct cyclades_port *info, int event) |
1da177e4 | 868 | { |
02f1175c JS |
869 | info->event |= 1 << event; /* remember what kind of event and who */ |
870 | schedule_work(&info->tqueue); | |
871 | } /* cy_sched_event */ | |
1da177e4 LT |
872 | |
873 | /* | |
874 | * This routine is used to handle the "bottom half" processing for the | |
875 | * serial driver, known also the "software interrupt" processing. | |
876 | * This processing is done at the kernel interrupt level, after the | |
877 | * cy#/_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This | |
878 | * is where time-consuming activities which can not be done in the | |
879 | * interrupt driver proper are done; the interrupt driver schedules | |
880 | * them using cy_sched_event(), and they get done here. | |
881 | * | |
882 | * This is done through one level of indirection--the task queue. | |
883 | * When a hardware interrupt service routine wants service by the | |
884 | * driver's bottom half, it enqueues the appropriate tq_struct (one | |
885 | * per port) to the keventd work queue and sets a request flag | |
886 | * that the work queue be processed. | |
887 | * | |
888 | * Although this may seem unwieldy, it gives the system a way to | |
889 | * pass an argument (in this case the pointer to the cyclades_port | |
890 | * structure) to the bottom half of the driver. Previous kernels | |
891 | * had to poll every port to see if that port needed servicing. | |
892 | */ | |
893 | static void | |
c4028958 | 894 | do_softint(struct work_struct *work) |
1da177e4 | 895 | { |
c4028958 DH |
896 | struct cyclades_port *info = |
897 | container_of(work, struct cyclades_port, tqueue); | |
02f1175c JS |
898 | struct tty_struct *tty; |
899 | ||
900 | tty = info->tty; | |
901 | if (!tty) | |
902 | return; | |
903 | ||
904 | if (test_and_clear_bit(Cy_EVENT_HANGUP, &info->event)) { | |
905 | tty_hangup(info->tty); | |
906 | wake_up_interruptible(&info->open_wait); | |
907 | info->flags &= ~ASYNC_NORMAL_ACTIVE; | |
908 | } | |
909 | if (test_and_clear_bit(Cy_EVENT_OPEN_WAKEUP, &info->event)) | |
910 | wake_up_interruptible(&info->open_wait); | |
1da177e4 | 911 | #ifdef CONFIG_CYZ_INTR |
3991428d JS |
912 | if (test_and_clear_bit(Cy_EVENT_Z_RX_FULL, &info->event) && |
913 | !timer_pending(&cyz_rx_full_timer[info->line])) | |
914 | mod_timer(&cyz_rx_full_timer[info->line], jiffies + 1); | |
1da177e4 | 915 | #endif |
02f1175c JS |
916 | if (test_and_clear_bit(Cy_EVENT_DELTA_WAKEUP, &info->event)) |
917 | wake_up_interruptible(&info->delta_msr_wait); | |
918 | tty_wakeup(tty); | |
1da177e4 | 919 | #ifdef Z_WAKE |
02f1175c | 920 | if (test_and_clear_bit(Cy_EVENT_SHUTDOWN_WAKEUP, &info->event)) |
2c7fea99 | 921 | complete(&info->shutdown_wait); |
1da177e4 LT |
922 | #endif |
923 | } /* do_softint */ | |
924 | ||
925 | ||
926 | /***********************************************************/ | |
927 | /********* Start of block of Cyclom-Y specific code ********/ | |
928 | ||
929 | /* This routine waits up to 1000 micro-seconds for the previous | |
930 | command to the Cirrus chip to complete and then issues the | |
931 | new command. An error is returned if the previous command | |
932 | didn't finish within the time limit. | |
933 | ||
934 | This function is only called from inside spinlock-protected code. | |
935 | */ | |
02f1175c | 936 | static int cyy_issue_cmd(void __iomem * base_addr, u_char cmd, int index) |
1da177e4 | 937 | { |
ad39c300 | 938 | unsigned int i; |
1da177e4 | 939 | |
02f1175c JS |
940 | /* Check to see that the previous command has completed */ |
941 | for (i = 0; i < 100; i++) { | |
db05c3b1 | 942 | if (readb(base_addr + (CyCCR << index)) == 0) { |
02f1175c JS |
943 | break; |
944 | } | |
945 | udelay(10L); | |
1da177e4 | 946 | } |
02f1175c JS |
947 | /* if the CCR never cleared, the previous command |
948 | didn't finish within the "reasonable time" */ | |
949 | if (i == 100) | |
096dcfce | 950 | return -1; |
1da177e4 | 951 | |
02f1175c JS |
952 | /* Issue the new command */ |
953 | cy_writeb(base_addr + (CyCCR << index), cmd); | |
1da177e4 | 954 | |
096dcfce | 955 | return 0; |
02f1175c | 956 | } /* cyy_issue_cmd */ |
1da177e4 LT |
957 | |
958 | #ifdef CONFIG_ISA | |
959 | /* ISA interrupt detection code */ | |
02f1175c | 960 | static unsigned detect_isa_irq(void __iomem * address) |
1da177e4 | 961 | { |
02f1175c JS |
962 | int irq; |
963 | unsigned long irqs, flags; | |
964 | int save_xir, save_car; | |
965 | int index = 0; /* IRQ probing is only for ISA */ | |
966 | ||
967 | /* forget possible initially masked and pending IRQ */ | |
968 | irq = probe_irq_off(probe_irq_on()); | |
969 | ||
970 | /* Clear interrupts on the board first */ | |
971 | cy_writeb(address + (Cy_ClrIntr << index), 0); | |
972 | /* Cy_ClrIntr is 0x1800 */ | |
973 | ||
974 | irqs = probe_irq_on(); | |
975 | /* Wait ... */ | |
976 | udelay(5000L); | |
977 | ||
978 | /* Enable the Tx interrupts on the CD1400 */ | |
979 | local_irq_save(flags); | |
980 | cy_writeb(address + (CyCAR << index), 0); | |
981 | cyy_issue_cmd(address, CyCHAN_CTL | CyENB_XMTR, index); | |
982 | ||
983 | cy_writeb(address + (CyCAR << index), 0); | |
984 | cy_writeb(address + (CySRER << index), | |
db05c3b1 | 985 | readb(address + (CySRER << index)) | CyTxRdy); |
02f1175c JS |
986 | local_irq_restore(flags); |
987 | ||
988 | /* Wait ... */ | |
989 | udelay(5000L); | |
990 | ||
991 | /* Check which interrupt is in use */ | |
992 | irq = probe_irq_off(irqs); | |
993 | ||
994 | /* Clean up */ | |
db05c3b1 JS |
995 | save_xir = (u_char) readb(address + (CyTIR << index)); |
996 | save_car = readb(address + (CyCAR << index)); | |
02f1175c JS |
997 | cy_writeb(address + (CyCAR << index), (save_xir & 0x3)); |
998 | cy_writeb(address + (CySRER << index), | |
db05c3b1 | 999 | readb(address + (CySRER << index)) & ~CyTxRdy); |
02f1175c JS |
1000 | cy_writeb(address + (CyTIR << index), (save_xir & 0x3f)); |
1001 | cy_writeb(address + (CyCAR << index), (save_car)); | |
1002 | cy_writeb(address + (Cy_ClrIntr << index), 0); | |
1003 | /* Cy_ClrIntr is 0x1800 */ | |
1004 | ||
1005 | return (irq > 0) ? irq : 0; | |
1da177e4 | 1006 | } |
02f1175c | 1007 | #endif /* CONFIG_ISA */ |
1da177e4 | 1008 | |
e941027f | 1009 | static void cyy_intr_chip(struct cyclades_card *cinfo, int chip, |
02f1175c | 1010 | void __iomem * base_addr, int status, int index) |
e941027f JS |
1011 | { |
1012 | struct cyclades_port *info; | |
1013 | struct tty_struct *tty; | |
ad39c300 | 1014 | int char_count; |
dd025c0c | 1015 | int j, len, mdm_change, mdm_status, outch; |
e941027f JS |
1016 | int save_xir, channel, save_car; |
1017 | char data; | |
1018 | ||
02f1175c | 1019 | if (status & CySRReceive) { /* reception interrupt */ |
e941027f | 1020 | #ifdef CY_DEBUG_INTERRUPTS |
21719191 | 1021 | printk(KERN_DEBUG "cyy_interrupt: rcvd intr, chip %d\n", chip); |
e941027f | 1022 | #endif |
02f1175c JS |
1023 | /* determine the channel & change to that context */ |
1024 | spin_lock(&cinfo->card_lock); | |
db05c3b1 | 1025 | save_xir = (u_char) readb(base_addr + (CyRIR << index)); |
02f1175c | 1026 | channel = (u_short) (save_xir & CyIRChannel); |
dd025c0c | 1027 | info = &cinfo->ports[channel + chip * 4]; |
db05c3b1 | 1028 | save_car = readb(base_addr + (CyCAR << index)); |
02f1175c JS |
1029 | cy_writeb(base_addr + (CyCAR << index), save_xir); |
1030 | ||
1031 | /* if there is nowhere to put the data, discard it */ | |
f7429034 | 1032 | if (info->tty == NULL) { |
db05c3b1 | 1033 | j = (readb(base_addr + (CyRIVR << index)) & |
02f1175c JS |
1034 | CyIVRMask); |
1035 | if (j == CyIVRRxEx) { /* exception */ | |
db05c3b1 | 1036 | data = readb(base_addr + (CyRDSR << index)); |
02f1175c | 1037 | } else { /* normal character reception */ |
db05c3b1 | 1038 | char_count = readb(base_addr + |
02f1175c JS |
1039 | (CyRDCR << index)); |
1040 | while (char_count--) { | |
db05c3b1 | 1041 | data = readb(base_addr + |
02f1175c | 1042 | (CyRDSR << index)); |
e941027f | 1043 | } |
e941027f | 1044 | } |
02f1175c JS |
1045 | } else { /* there is an open port for this data */ |
1046 | tty = info->tty; | |
db05c3b1 | 1047 | j = (readb(base_addr + (CyRIVR << index)) & |
02f1175c JS |
1048 | CyIVRMask); |
1049 | if (j == CyIVRRxEx) { /* exception */ | |
db05c3b1 | 1050 | data = readb(base_addr + (CyRDSR << index)); |
02f1175c JS |
1051 | |
1052 | /* For statistics only */ | |
1053 | if (data & CyBREAK) | |
1054 | info->icount.brk++; | |
1055 | else if (data & CyFRAME) | |
1056 | info->icount.frame++; | |
1057 | else if (data & CyPARITY) | |
1058 | info->icount.parity++; | |
1059 | else if (data & CyOVERRUN) | |
1060 | info->icount.overrun++; | |
1061 | ||
1062 | if (data & info->ignore_status_mask) { | |
1063 | info->icount.rx++; | |
3fcbc729 | 1064 | spin_unlock(&cinfo->card_lock); |
02f1175c JS |
1065 | return; |
1066 | } | |
1067 | if (tty_buffer_request_room(tty, 1)) { | |
1068 | if (data & info->read_status_mask) { | |
1069 | if (data & CyBREAK) { | |
1070 | tty_insert_flip_char( | |
1071 | tty, | |
db05c3b1 | 1072 | readb( |
02f1175c JS |
1073 | base_addr + |
1074 | (CyRDSR << | |
1075 | index)), | |
1076 | TTY_BREAK); | |
1077 | info->icount.rx++; | |
1078 | if (info->flags & | |
1079 | ASYNC_SAK) { | |
1080 | do_SAK(tty); | |
1081 | } | |
1082 | } else if (data & CyFRAME) { | |
1083 | tty_insert_flip_char( | |
1084 | tty, | |
db05c3b1 | 1085 | readb( |
02f1175c JS |
1086 | base_addr + |
1087 | (CyRDSR << | |
1088 | index)), | |
1089 | TTY_FRAME); | |
1090 | info->icount.rx++; | |
1091 | info->idle_stats. | |
1092 | frame_errs++; | |
1093 | } else if (data & CyPARITY) { | |
1094 | /* Pieces of seven... */ | |
1095 | tty_insert_flip_char( | |
1096 | tty, | |
db05c3b1 | 1097 | readb( |
02f1175c JS |
1098 | base_addr + |
1099 | (CyRDSR << | |
1100 | index)), | |
1101 | TTY_PARITY); | |
1102 | info->icount.rx++; | |
1103 | info->idle_stats. | |
1104 | parity_errs++; | |
1105 | } else if (data & CyOVERRUN) { | |
1106 | tty_insert_flip_char( | |
1107 | tty, 0, | |
1108 | TTY_OVERRUN); | |
1109 | info->icount.rx++; | |
1110 | /* If the flip buffer itself is | |
1111 | overflowing, we still lose | |
1112 | the next incoming character. | |
1113 | */ | |
1114 | tty_insert_flip_char( | |
1115 | tty, | |
db05c3b1 | 1116 | readb( |
02f1175c JS |
1117 | base_addr + |
1118 | (CyRDSR << | |
1119 | index)), | |
1120 | TTY_FRAME); | |
1121 | info->icount.rx++; | |
1122 | info->idle_stats. | |
1123 | overruns++; | |
1124 | /* These two conditions may imply */ | |
1125 | /* a normal read should be done. */ | |
1126 | /* }else if(data & CyTIMEOUT){ */ | |
1127 | /* }else if(data & CySPECHAR){ */ | |
1128 | } else { | |
1129 | tty_insert_flip_char( | |
1130 | tty, 0, | |
1131 | TTY_NORMAL); | |
1132 | info->icount.rx++; | |
1133 | } | |
1134 | } else { | |
1135 | tty_insert_flip_char(tty, 0, | |
1136 | TTY_NORMAL); | |
1137 | info->icount.rx++; | |
1138 | } | |
1139 | } else { | |
1140 | /* there was a software buffer | |
1141 | overrun and nothing could be | |
1142 | done about it!!! */ | |
1143 | info->icount.buf_overrun++; | |
1144 | info->idle_stats.overruns++; | |
1145 | } | |
1146 | } else { /* normal character reception */ | |
1147 | /* load # chars available from the chip */ | |
db05c3b1 | 1148 | char_count = readb(base_addr + |
02f1175c | 1149 | (CyRDCR << index)); |
e941027f JS |
1150 | |
1151 | #ifdef CY_ENABLE_MONITORING | |
02f1175c JS |
1152 | ++info->mon.int_count; |
1153 | info->mon.char_count += char_count; | |
1154 | if (char_count > info->mon.char_max) | |
1155 | info->mon.char_max = char_count; | |
1156 | info->mon.char_last = char_count; | |
e941027f | 1157 | #endif |
02f1175c JS |
1158 | len = tty_buffer_request_room(tty, char_count); |
1159 | while (len--) { | |
db05c3b1 | 1160 | data = readb(base_addr + |
02f1175c JS |
1161 | (CyRDSR << index)); |
1162 | tty_insert_flip_char(tty, data, | |
1163 | TTY_NORMAL); | |
1164 | info->idle_stats.recv_bytes++; | |
1165 | info->icount.rx++; | |
e941027f | 1166 | #ifdef CY_16Y_HACK |
02f1175c | 1167 | udelay(10L); |
e941027f | 1168 | #endif |
02f1175c JS |
1169 | } |
1170 | info->idle_stats.recv_idle = jiffies; | |
1171 | } | |
1172 | tty_schedule_flip(tty); | |
e941027f | 1173 | } |
02f1175c JS |
1174 | /* end of service */ |
1175 | cy_writeb(base_addr + (CyRIR << index), (save_xir & 0x3f)); | |
1176 | cy_writeb(base_addr + (CyCAR << index), (save_car)); | |
1177 | spin_unlock(&cinfo->card_lock); | |
e941027f JS |
1178 | } |
1179 | ||
02f1175c JS |
1180 | if (status & CySRTransmit) { /* transmission interrupt */ |
1181 | /* Since we only get here when the transmit buffer | |
1182 | is empty, we know we can always stuff a dozen | |
1183 | characters. */ | |
e941027f | 1184 | #ifdef CY_DEBUG_INTERRUPTS |
21719191 | 1185 | printk(KERN_DEBUG "cyy_interrupt: xmit intr, chip %d\n", chip); |
e941027f JS |
1186 | #endif |
1187 | ||
02f1175c JS |
1188 | /* determine the channel & change to that context */ |
1189 | spin_lock(&cinfo->card_lock); | |
db05c3b1 | 1190 | save_xir = (u_char) readb(base_addr + (CyTIR << index)); |
02f1175c | 1191 | channel = (u_short) (save_xir & CyIRChannel); |
db05c3b1 | 1192 | save_car = readb(base_addr + (CyCAR << index)); |
02f1175c JS |
1193 | cy_writeb(base_addr + (CyCAR << index), save_xir); |
1194 | ||
1195 | /* validate the port# (as configured and open) */ | |
dd025c0c | 1196 | if (channel + chip * 4 >= cinfo->nports) { |
02f1175c | 1197 | cy_writeb(base_addr + (CySRER << index), |
db05c3b1 | 1198 | readb(base_addr + (CySRER << index)) & |
02f1175c JS |
1199 | ~CyTxRdy); |
1200 | goto txend; | |
e941027f | 1201 | } |
dd025c0c | 1202 | info = &cinfo->ports[channel + chip * 4]; |
f7429034 | 1203 | if (info->tty == NULL) { |
02f1175c | 1204 | cy_writeb(base_addr + (CySRER << index), |
db05c3b1 | 1205 | readb(base_addr + (CySRER << index)) & |
02f1175c JS |
1206 | ~CyTxRdy); |
1207 | goto txdone; | |
e941027f | 1208 | } |
02f1175c JS |
1209 | |
1210 | /* load the on-chip space for outbound data */ | |
1211 | char_count = info->xmit_fifo_size; | |
1212 | ||
1213 | if (info->x_char) { /* send special char */ | |
1214 | outch = info->x_char; | |
1215 | cy_writeb(base_addr + (CyTDR << index), outch); | |
1216 | char_count--; | |
1217 | info->icount.tx++; | |
1218 | info->x_char = 0; | |
e941027f | 1219 | } |
02f1175c JS |
1220 | |
1221 | if (info->breakon || info->breakoff) { | |
1222 | if (info->breakon) { | |
1223 | cy_writeb(base_addr + (CyTDR << index), 0); | |
1224 | cy_writeb(base_addr + (CyTDR << index), 0x81); | |
1225 | info->breakon = 0; | |
1226 | char_count -= 2; | |
1227 | } | |
1228 | if (info->breakoff) { | |
1229 | cy_writeb(base_addr + (CyTDR << index), 0); | |
1230 | cy_writeb(base_addr + (CyTDR << index), 0x83); | |
1231 | info->breakoff = 0; | |
1232 | char_count -= 2; | |
1233 | } | |
e941027f | 1234 | } |
02f1175c JS |
1235 | |
1236 | while (char_count-- > 0) { | |
1237 | if (!info->xmit_cnt) { | |
db05c3b1 | 1238 | if (readb(base_addr + (CySRER << index)) & |
02f1175c JS |
1239 | CyTxMpty) { |
1240 | cy_writeb(base_addr + (CySRER << index), | |
db05c3b1 | 1241 | readb(base_addr + |
02f1175c JS |
1242 | (CySRER << index)) & |
1243 | ~CyTxMpty); | |
1244 | } else { | |
1245 | cy_writeb(base_addr + (CySRER << index), | |
db05c3b1 | 1246 | (readb(base_addr + |
02f1175c JS |
1247 | (CySRER << index)) & |
1248 | ~CyTxRdy) | CyTxMpty); | |
1249 | } | |
1250 | goto txdone; | |
1251 | } | |
f7429034 | 1252 | if (info->xmit_buf == NULL) { |
02f1175c | 1253 | cy_writeb(base_addr + (CySRER << index), |
db05c3b1 | 1254 | readb(base_addr + (CySRER << index)) & |
02f1175c JS |
1255 | ~CyTxRdy); |
1256 | goto txdone; | |
1257 | } | |
1258 | if (info->tty->stopped || info->tty->hw_stopped) { | |
1259 | cy_writeb(base_addr + (CySRER << index), | |
db05c3b1 | 1260 | readb(base_addr + (CySRER << index)) & |
02f1175c JS |
1261 | ~CyTxRdy); |
1262 | goto txdone; | |
1263 | } | |
1264 | /* Because the Embedded Transmit Commands have | |
1265 | been enabled, we must check to see if the | |
1266 | escape character, NULL, is being sent. If it | |
1267 | is, we must ensure that there is room for it | |
1268 | to be doubled in the output stream. Therefore | |
1269 | we no longer advance the pointer when the | |
1270 | character is fetched, but rather wait until | |
1271 | after the check for a NULL output character. | |
1272 | This is necessary because there may not be | |
1273 | room for the two chars needed to send a NULL.) | |
1274 | */ | |
1275 | outch = info->xmit_buf[info->xmit_tail]; | |
1276 | if (outch) { | |
1277 | info->xmit_cnt--; | |
1278 | info->xmit_tail = (info->xmit_tail + 1) & | |
1279 | (SERIAL_XMIT_SIZE - 1); | |
1280 | cy_writeb(base_addr + (CyTDR << index), outch); | |
1281 | info->icount.tx++; | |
1282 | } else { | |
1283 | if (char_count > 1) { | |
1284 | info->xmit_cnt--; | |
1285 | info->xmit_tail = (info->xmit_tail + 1)& | |
1286 | (SERIAL_XMIT_SIZE - 1); | |
1287 | cy_writeb(base_addr + (CyTDR << index), | |
1288 | outch); | |
1289 | cy_writeb(base_addr + (CyTDR << index), | |
1290 | 0); | |
1291 | info->icount.tx++; | |
1292 | char_count--; | |
02f1175c JS |
1293 | } |
1294 | } | |
e941027f | 1295 | } |
e941027f JS |
1296 | |
1297 | txdone: | |
02f1175c JS |
1298 | if (info->xmit_cnt < WAKEUP_CHARS) { |
1299 | cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP); | |
1300 | } | |
e941027f | 1301 | txend: |
02f1175c JS |
1302 | /* end of service */ |
1303 | cy_writeb(base_addr + (CyTIR << index), (save_xir & 0x3f)); | |
1304 | cy_writeb(base_addr + (CyCAR << index), (save_car)); | |
1305 | spin_unlock(&cinfo->card_lock); | |
e941027f JS |
1306 | } |
1307 | ||
02f1175c | 1308 | if (status & CySRModem) { /* modem interrupt */ |
e941027f | 1309 | |
02f1175c JS |
1310 | /* determine the channel & change to that context */ |
1311 | spin_lock(&cinfo->card_lock); | |
db05c3b1 | 1312 | save_xir = (u_char) readb(base_addr + (CyMIR << index)); |
02f1175c | 1313 | channel = (u_short) (save_xir & CyIRChannel); |
dd025c0c | 1314 | info = &cinfo->ports[channel + chip * 4]; |
db05c3b1 | 1315 | save_car = readb(base_addr + (CyCAR << index)); |
02f1175c JS |
1316 | cy_writeb(base_addr + (CyCAR << index), save_xir); |
1317 | ||
db05c3b1 JS |
1318 | mdm_change = readb(base_addr + (CyMISR << index)); |
1319 | mdm_status = readb(base_addr + (CyMSVR1 << index)); | |
02f1175c | 1320 | |
f7429034 | 1321 | if (info->tty) { |
02f1175c JS |
1322 | if (mdm_change & CyANY_DELTA) { |
1323 | /* For statistics only */ | |
1324 | if (mdm_change & CyDCD) | |
1325 | info->icount.dcd++; | |
1326 | if (mdm_change & CyCTS) | |
1327 | info->icount.cts++; | |
1328 | if (mdm_change & CyDSR) | |
1329 | info->icount.dsr++; | |
1330 | if (mdm_change & CyRI) | |
1331 | info->icount.rng++; | |
1332 | ||
1333 | cy_sched_event(info, Cy_EVENT_DELTA_WAKEUP); | |
e941027f | 1334 | } |
02f1175c JS |
1335 | |
1336 | if ((mdm_change & CyDCD) && | |
1337 | (info->flags & ASYNC_CHECK_CD)) { | |
1338 | if (mdm_status & CyDCD) { | |
1339 | cy_sched_event(info, | |
1340 | Cy_EVENT_OPEN_WAKEUP); | |
1341 | } else { | |
1342 | cy_sched_event(info, Cy_EVENT_HANGUP); | |
1343 | } | |
1344 | } | |
1345 | if ((mdm_change & CyCTS) && | |
1346 | (info->flags & ASYNC_CTS_FLOW)) { | |
1347 | if (info->tty->hw_stopped) { | |
1348 | if (mdm_status & CyCTS) { | |
1349 | /* cy_start isn't used | |
1350 | because... !!! */ | |
1351 | info->tty->hw_stopped = 0; | |
1352 | cy_writeb(base_addr + | |
1353 | (CySRER << index), | |
db05c3b1 | 1354 | readb(base_addr + |
02f1175c JS |
1355 | (CySRER << |
1356 | index))| | |
1357 | CyTxRdy); | |
1358 | cy_sched_event(info, | |
1359 | Cy_EVENT_WRITE_WAKEUP); | |
1360 | } | |
1361 | } else { | |
1362 | if (!(mdm_status & CyCTS)) { | |
1363 | /* cy_stop isn't used | |
1364 | because ... !!! */ | |
1365 | info->tty->hw_stopped = 1; | |
1366 | cy_writeb(base_addr + | |
1367 | (CySRER << index), | |
db05c3b1 | 1368 | readb(base_addr + |
02f1175c JS |
1369 | (CySRER << |
1370 | index)) & | |
1371 | ~CyTxRdy); | |
1372 | } | |
1373 | } | |
1374 | } | |
f7429034 | 1375 | /* if (mdm_change & CyDSR) { |
02f1175c JS |
1376 | } |
1377 | if (mdm_change & CyRI) { | |
f7429034 | 1378 | }*/ |
e941027f | 1379 | } |
02f1175c JS |
1380 | /* end of service */ |
1381 | cy_writeb(base_addr + (CyMIR << index), (save_xir & 0x3f)); | |
1382 | cy_writeb(base_addr + (CyCAR << index), save_car); | |
1383 | spin_unlock(&cinfo->card_lock); | |
e941027f JS |
1384 | } |
1385 | } | |
1386 | ||
1da177e4 LT |
1387 | /* The real interrupt service routine is called |
1388 | whenever the card wants its hand held--chars | |
1389 | received, out buffer empty, modem change, etc. | |
1390 | */ | |
02f1175c | 1391 | static irqreturn_t cyy_interrupt(int irq, void *dev_id) |
1da177e4 | 1392 | { |
02f1175c | 1393 | int status; |
f7429034 | 1394 | struct cyclades_card *cinfo = dev_id; |
02f1175c JS |
1395 | void __iomem *base_addr, *card_base_addr; |
1396 | int chip; | |
1397 | int index; | |
1398 | int too_many; | |
1399 | int had_work; | |
1400 | ||
f7429034 | 1401 | if (unlikely(cinfo == NULL)) { |
1da177e4 | 1402 | #ifdef CY_DEBUG_INTERRUPTS |
21719191 | 1403 | printk(KERN_DEBUG "cyy_interrupt: spurious interrupt %d\n",irq); |
1da177e4 | 1404 | #endif |
02f1175c JS |
1405 | return IRQ_NONE; /* spurious interrupt */ |
1406 | } | |
1407 | ||
1408 | card_base_addr = cinfo->base_addr; | |
1409 | index = cinfo->bus_index; | |
1410 | ||
f1e83c6c JS |
1411 | /* card was not initialized yet (e.g. DEBUG_SHIRQ) */ |
1412 | if (unlikely(card_base_addr == NULL)) | |
1413 | return IRQ_HANDLED; | |
1414 | ||
02f1175c JS |
1415 | /* This loop checks all chips in the card. Make a note whenever |
1416 | _any_ chip had some work to do, as this is considered an | |
1417 | indication that there will be more to do. Only when no chip | |
1418 | has any work does this outermost loop exit. | |
1419 | */ | |
1420 | do { | |
1421 | had_work = 0; | |
1422 | for (chip = 0; chip < cinfo->num_chips; chip++) { | |
1423 | base_addr = cinfo->base_addr + | |
1424 | (cy_chip_offset[chip] << index); | |
1425 | too_many = 0; | |
db05c3b1 | 1426 | while ((status = readb(base_addr + |
02f1175c JS |
1427 | (CySVRR << index))) != 0x00) { |
1428 | had_work++; | |
1429 | /* The purpose of the following test is to ensure that | |
1430 | no chip can monopolize the driver. This forces the | |
1431 | chips to be checked in a round-robin fashion (after | |
1432 | draining each of a bunch (1000) of characters). | |
1433 | */ | |
1434 | if (1000 < too_many++) { | |
1435 | break; | |
1436 | } | |
1437 | cyy_intr_chip(cinfo, chip, base_addr, status, | |
1438 | index); | |
1439 | } | |
1440 | } | |
1441 | } while (had_work); | |
1442 | ||
1443 | /* clear interrupts */ | |
1444 | spin_lock(&cinfo->card_lock); | |
1445 | cy_writeb(card_base_addr + (Cy_ClrIntr << index), 0); | |
1446 | /* Cy_ClrIntr is 0x1800 */ | |
1447 | spin_unlock(&cinfo->card_lock); | |
1448 | return IRQ_HANDLED; | |
1449 | } /* cyy_interrupt */ | |
1da177e4 LT |
1450 | |
1451 | /***********************************************************/ | |
1452 | /********* End of block of Cyclom-Y specific code **********/ | |
1453 | /******** Start of block of Cyclades-Z specific code *********/ | |
1454 | /***********************************************************/ | |
1455 | ||
1456 | static int | |
02f1175c | 1457 | cyz_fetch_msg(struct cyclades_card *cinfo, |
1a86b5e3 | 1458 | __u32 * channel, __u8 * cmd, __u32 * param) |
1da177e4 | 1459 | { |
02f1175c JS |
1460 | struct FIRM_ID __iomem *firm_id; |
1461 | struct ZFW_CTRL __iomem *zfw_ctrl; | |
1462 | struct BOARD_CTRL __iomem *board_ctrl; | |
1463 | unsigned long loc_doorbell; | |
1464 | ||
1465 | firm_id = cinfo->base_addr + ID_ADDRESS; | |
1466 | if (!ISZLOADED(*cinfo)) { | |
096dcfce | 1467 | return -1; |
02f1175c | 1468 | } |
db05c3b1 | 1469 | zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); |
02f1175c JS |
1470 | board_ctrl = &zfw_ctrl->board_ctrl; |
1471 | ||
db05c3b1 | 1472 | loc_doorbell = readl(&((struct RUNTIME_9060 __iomem *) |
02f1175c JS |
1473 | (cinfo->ctl_addr))->loc_doorbell); |
1474 | if (loc_doorbell) { | |
1475 | *cmd = (char)(0xff & loc_doorbell); | |
db05c3b1 JS |
1476 | *channel = readl(&board_ctrl->fwcmd_channel); |
1477 | *param = (__u32) readl(&board_ctrl->fwcmd_param); | |
02f1175c JS |
1478 | cy_writel(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))-> |
1479 | loc_doorbell, 0xffffffff); | |
1480 | return 1; | |
1481 | } | |
1482 | return 0; | |
1483 | } /* cyz_fetch_msg */ | |
1da177e4 LT |
1484 | |
1485 | static int | |
02f1175c | 1486 | cyz_issue_cmd(struct cyclades_card *cinfo, |
1a86b5e3 | 1487 | __u32 channel, __u8 cmd, __u32 param) |
1da177e4 | 1488 | { |
02f1175c JS |
1489 | struct FIRM_ID __iomem *firm_id; |
1490 | struct ZFW_CTRL __iomem *zfw_ctrl; | |
1491 | struct BOARD_CTRL __iomem *board_ctrl; | |
1a86b5e3 | 1492 | __u32 __iomem *pci_doorbell; |
02f1175c JS |
1493 | int index; |
1494 | ||
1495 | firm_id = cinfo->base_addr + ID_ADDRESS; | |
1496 | if (!ISZLOADED(*cinfo)) { | |
096dcfce | 1497 | return -1; |
02f1175c | 1498 | } |
db05c3b1 | 1499 | zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); |
02f1175c JS |
1500 | board_ctrl = &zfw_ctrl->board_ctrl; |
1501 | ||
1502 | index = 0; | |
1503 | pci_doorbell = | |
1504 | &((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->pci_doorbell; | |
db05c3b1 | 1505 | while ((readl(pci_doorbell) & 0xff) != 0) { |
02f1175c | 1506 | if (index++ == 1000) { |
db05c3b1 | 1507 | return (int)(readl(pci_doorbell) & 0xff); |
02f1175c JS |
1508 | } |
1509 | udelay(50L); | |
1510 | } | |
1511 | cy_writel(&board_ctrl->hcmd_channel, channel); | |
1512 | cy_writel(&board_ctrl->hcmd_param, param); | |
1513 | cy_writel(pci_doorbell, (long)cmd); | |
1514 | ||
096dcfce | 1515 | return 0; |
02f1175c | 1516 | } /* cyz_issue_cmd */ |
1da177e4 LT |
1517 | |
1518 | static void | |
ad39c300 JS |
1519 | cyz_handle_rx(struct cyclades_port *info, struct CH_CTRL __iomem *ch_ctrl, |
1520 | struct BUF_CTRL __iomem *buf_ctrl) | |
1da177e4 | 1521 | { |
875b206b | 1522 | struct cyclades_card *cinfo = info->card; |
02f1175c | 1523 | struct tty_struct *tty = info->tty; |
ad39c300 | 1524 | int char_count; |
02f1175c | 1525 | int len; |
1da177e4 | 1526 | #ifdef BLOCKMOVE |
ce71b0ff | 1527 | unsigned char *buf; |
1da177e4 | 1528 | #else |
02f1175c | 1529 | char data; |
1da177e4 | 1530 | #endif |
ad39c300 | 1531 | __u32 rx_put, rx_get, new_rx_get, rx_bufsize, rx_bufaddr; |
1da177e4 | 1532 | |
db05c3b1 JS |
1533 | rx_get = new_rx_get = readl(&buf_ctrl->rx_get); |
1534 | rx_put = readl(&buf_ctrl->rx_put); | |
1535 | rx_bufsize = readl(&buf_ctrl->rx_bufsize); | |
1536 | rx_bufaddr = readl(&buf_ctrl->rx_bufaddr); | |
02f1175c JS |
1537 | if (rx_put >= rx_get) |
1538 | char_count = rx_put - rx_get; | |
1539 | else | |
1540 | char_count = rx_put - rx_get + rx_bufsize; | |
1da177e4 | 1541 | |
02f1175c | 1542 | if (char_count) { |
1da177e4 | 1543 | #ifdef CY_ENABLE_MONITORING |
02f1175c JS |
1544 | info->mon.int_count++; |
1545 | info->mon.char_count += char_count; | |
1546 | if (char_count > info->mon.char_max) | |
1547 | info->mon.char_max = char_count; | |
1548 | info->mon.char_last = char_count; | |
1da177e4 | 1549 | #endif |
f7429034 | 1550 | if (tty == NULL) { |
02f1175c JS |
1551 | /* flush received characters */ |
1552 | new_rx_get = (new_rx_get + char_count) & | |
1553 | (rx_bufsize - 1); | |
1554 | info->rflush_count++; | |
1555 | } else { | |
1da177e4 | 1556 | #ifdef BLOCKMOVE |
02f1175c JS |
1557 | /* we'd like to use memcpy(t, f, n) and memset(s, c, count) |
1558 | for performance, but because of buffer boundaries, there | |
1559 | may be several steps to the operation */ | |
ce71b0ff JS |
1560 | while (1) { |
1561 | len = tty_prepare_flip_string(tty, &buf, | |
1562 | char_count); | |
1563 | if (!len) | |
1564 | break; | |
1565 | ||
1566 | len = min_t(unsigned int, min(len, char_count), | |
1567 | rx_bufsize - new_rx_get); | |
1568 | ||
1569 | memcpy_fromio(buf, cinfo->base_addr + | |
1570 | rx_bufaddr + new_rx_get, len); | |
1571 | ||
1572 | new_rx_get = (new_rx_get + len) & | |
02f1175c | 1573 | (rx_bufsize - 1); |
ce71b0ff JS |
1574 | char_count -= len; |
1575 | info->icount.rx += len; | |
1576 | info->idle_stats.recv_bytes += len; | |
02f1175c | 1577 | } |
1da177e4 | 1578 | #else |
02f1175c JS |
1579 | len = tty_buffer_request_room(tty, char_count); |
1580 | while (len--) { | |
db05c3b1 | 1581 | data = readb(cinfo->base_addr + rx_bufaddr + |
02f1175c JS |
1582 | new_rx_get); |
1583 | new_rx_get = (new_rx_get + 1)& (rx_bufsize - 1); | |
1584 | tty_insert_flip_char(tty, data, TTY_NORMAL); | |
1585 | info->idle_stats.recv_bytes++; | |
1586 | info->icount.rx++; | |
1587 | } | |
1da177e4 LT |
1588 | #endif |
1589 | #ifdef CONFIG_CYZ_INTR | |
02f1175c JS |
1590 | /* Recalculate the number of chars in the RX buffer and issue |
1591 | a cmd in case it's higher than the RX high water mark */ | |
db05c3b1 | 1592 | rx_put = readl(&buf_ctrl->rx_put); |
02f1175c JS |
1593 | if (rx_put >= rx_get) |
1594 | char_count = rx_put - rx_get; | |
1595 | else | |
1596 | char_count = rx_put - rx_get + rx_bufsize; | |
db05c3b1 | 1597 | if (char_count >= (int)readl(&buf_ctrl->rx_threshold)) { |
02f1175c JS |
1598 | cy_sched_event(info, Cy_EVENT_Z_RX_FULL); |
1599 | } | |
1da177e4 | 1600 | #endif |
02f1175c JS |
1601 | info->idle_stats.recv_idle = jiffies; |
1602 | tty_schedule_flip(tty); | |
1603 | } | |
1604 | /* Update rx_get */ | |
1605 | cy_writel(&buf_ctrl->rx_get, new_rx_get); | |
1da177e4 | 1606 | } |
1da177e4 LT |
1607 | } |
1608 | ||
1609 | static void | |
ad39c300 JS |
1610 | cyz_handle_tx(struct cyclades_port *info, struct CH_CTRL __iomem *ch_ctrl, |
1611 | struct BUF_CTRL __iomem *buf_ctrl) | |
1da177e4 | 1612 | { |
875b206b | 1613 | struct cyclades_card *cinfo = info->card; |
02f1175c JS |
1614 | struct tty_struct *tty = info->tty; |
1615 | char data; | |
ad39c300 | 1616 | int char_count; |
1da177e4 | 1617 | #ifdef BLOCKMOVE |
02f1175c | 1618 | int small_count; |
1da177e4 | 1619 | #endif |
ad39c300 | 1620 | __u32 tx_put, tx_get, tx_bufsize, tx_bufaddr; |
1da177e4 | 1621 | |
02f1175c JS |
1622 | if (info->xmit_cnt <= 0) /* Nothing to transmit */ |
1623 | return; | |
1da177e4 | 1624 | |
db05c3b1 JS |
1625 | tx_get = readl(&buf_ctrl->tx_get); |
1626 | tx_put = readl(&buf_ctrl->tx_put); | |
1627 | tx_bufsize = readl(&buf_ctrl->tx_bufsize); | |
1628 | tx_bufaddr = readl(&buf_ctrl->tx_bufaddr); | |
02f1175c JS |
1629 | if (tx_put >= tx_get) |
1630 | char_count = tx_get - tx_put - 1 + tx_bufsize; | |
1631 | else | |
1632 | char_count = tx_get - tx_put - 1; | |
1da177e4 | 1633 | |
02f1175c | 1634 | if (char_count) { |
1da177e4 | 1635 | |
f7429034 | 1636 | if (tty == NULL) |
02f1175c | 1637 | goto ztxdone; |
1da177e4 | 1638 | |
02f1175c JS |
1639 | if (info->x_char) { /* send special char */ |
1640 | data = info->x_char; | |
1da177e4 | 1641 | |
02f1175c JS |
1642 | cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data); |
1643 | tx_put = (tx_put + 1) & (tx_bufsize - 1); | |
1644 | info->x_char = 0; | |
1645 | char_count--; | |
1646 | info->icount.tx++; | |
02f1175c | 1647 | } |
1da177e4 | 1648 | #ifdef BLOCKMOVE |
02f1175c JS |
1649 | while (0 < (small_count = min_t(unsigned int, |
1650 | tx_bufsize - tx_put, min_t(unsigned int, | |
1651 | (SERIAL_XMIT_SIZE - info->xmit_tail), | |
1652 | min_t(unsigned int, info->xmit_cnt, | |
1653 | char_count))))) { | |
1654 | ||
1655 | memcpy_toio((char *)(cinfo->base_addr + tx_bufaddr + | |
1656 | tx_put), | |
1657 | &info->xmit_buf[info->xmit_tail], | |
1658 | small_count); | |
1659 | ||
1660 | tx_put = (tx_put + small_count) & (tx_bufsize - 1); | |
1661 | char_count -= small_count; | |
1662 | info->icount.tx += small_count; | |
1663 | info->xmit_cnt -= small_count; | |
1664 | info->xmit_tail = (info->xmit_tail + small_count) & | |
1665 | (SERIAL_XMIT_SIZE - 1); | |
02f1175c | 1666 | } |
1da177e4 | 1667 | #else |
02f1175c JS |
1668 | while (info->xmit_cnt && char_count) { |
1669 | data = info->xmit_buf[info->xmit_tail]; | |
1670 | info->xmit_cnt--; | |
1671 | info->xmit_tail = (info->xmit_tail + 1) & | |
1672 | (SERIAL_XMIT_SIZE - 1); | |
1673 | ||
1674 | cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data); | |
1675 | tx_put = (tx_put + 1) & (tx_bufsize - 1); | |
1676 | char_count--; | |
1677 | info->icount.tx++; | |
02f1175c | 1678 | } |
1da177e4 | 1679 | #endif |
02f1175c JS |
1680 | ztxdone: |
1681 | if (info->xmit_cnt < WAKEUP_CHARS) { | |
1682 | cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP); | |
1683 | } | |
1684 | /* Update tx_put */ | |
1685 | cy_writel(&buf_ctrl->tx_put, tx_put); | |
1da177e4 | 1686 | } |
1da177e4 LT |
1687 | } |
1688 | ||
02f1175c | 1689 | static void cyz_handle_cmd(struct cyclades_card *cinfo) |
1da177e4 | 1690 | { |
02f1175c JS |
1691 | struct tty_struct *tty; |
1692 | struct cyclades_port *info; | |
ad39c300 JS |
1693 | static struct FIRM_ID __iomem *firm_id; |
1694 | static struct ZFW_CTRL __iomem *zfw_ctrl; | |
1695 | static struct BOARD_CTRL __iomem *board_ctrl; | |
1696 | static struct CH_CTRL __iomem *ch_ctrl; | |
1697 | static struct BUF_CTRL __iomem *buf_ctrl; | |
1a86b5e3 KK |
1698 | __u32 channel; |
1699 | __u8 cmd; | |
1700 | __u32 param; | |
1701 | __u32 hw_ver, fw_ver; | |
02f1175c JS |
1702 | int special_count; |
1703 | int delta_count; | |
1704 | ||
1705 | firm_id = cinfo->base_addr + ID_ADDRESS; | |
db05c3b1 | 1706 | zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); |
02f1175c | 1707 | board_ctrl = &zfw_ctrl->board_ctrl; |
db05c3b1 JS |
1708 | fw_ver = readl(&board_ctrl->fw_version); |
1709 | hw_ver = readl(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))-> | |
02f1175c JS |
1710 | mail_box_0); |
1711 | ||
1712 | while (cyz_fetch_msg(cinfo, &channel, &cmd, ¶m) == 1) { | |
1713 | special_count = 0; | |
1714 | delta_count = 0; | |
dd025c0c | 1715 | info = &cinfo->ports[channel]; |
f7429034 | 1716 | if ((tty = info->tty) == NULL) |
02f1175c | 1717 | continue; |
f7429034 | 1718 | |
02f1175c JS |
1719 | ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]); |
1720 | buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]); | |
1721 | ||
1722 | switch (cmd) { | |
1723 | case C_CM_PR_ERROR: | |
1724 | tty_insert_flip_char(tty, 0, TTY_PARITY); | |
1725 | info->icount.rx++; | |
1726 | special_count++; | |
1727 | break; | |
1728 | case C_CM_FR_ERROR: | |
1729 | tty_insert_flip_char(tty, 0, TTY_FRAME); | |
1730 | info->icount.rx++; | |
1731 | special_count++; | |
1732 | break; | |
1733 | case C_CM_RXBRK: | |
1734 | tty_insert_flip_char(tty, 0, TTY_BREAK); | |
1735 | info->icount.rx++; | |
1736 | special_count++; | |
1737 | break; | |
1738 | case C_CM_MDCD: | |
1739 | info->icount.dcd++; | |
1740 | delta_count++; | |
1741 | if (info->flags & ASYNC_CHECK_CD) { | |
1742 | if ((fw_ver > 241 ? ((u_long) param) : | |
db05c3b1 | 1743 | readl(&ch_ctrl->rs_status)) & |
02f1175c JS |
1744 | C_RS_DCD) { |
1745 | cy_sched_event(info, | |
1746 | Cy_EVENT_OPEN_WAKEUP); | |
1747 | } else { | |
1748 | cy_sched_event(info, Cy_EVENT_HANGUP); | |
1749 | } | |
1750 | } | |
1751 | break; | |
1752 | case C_CM_MCTS: | |
1753 | info->icount.cts++; | |
1754 | delta_count++; | |
1755 | break; | |
1756 | case C_CM_MRI: | |
1757 | info->icount.rng++; | |
1758 | delta_count++; | |
1759 | break; | |
1760 | case C_CM_MDSR: | |
1761 | info->icount.dsr++; | |
1762 | delta_count++; | |
1763 | break; | |
1da177e4 | 1764 | #ifdef Z_WAKE |
02f1175c JS |
1765 | case C_CM_IOCTLW: |
1766 | cy_sched_event(info, Cy_EVENT_SHUTDOWN_WAKEUP); | |
1767 | break; | |
1da177e4 LT |
1768 | #endif |
1769 | #ifdef CONFIG_CYZ_INTR | |
02f1175c JS |
1770 | case C_CM_RXHIWM: |
1771 | case C_CM_RXNNDT: | |
1772 | case C_CM_INTBACK2: | |
1773 | /* Reception Interrupt */ | |
1da177e4 | 1774 | #ifdef CY_DEBUG_INTERRUPTS |
21719191 JS |
1775 | printk(KERN_DEBUG "cyz_interrupt: rcvd intr, card %d, " |
1776 | "port %ld\n", info->card, channel); | |
1da177e4 | 1777 | #endif |
02f1175c JS |
1778 | cyz_handle_rx(info, ch_ctrl, buf_ctrl); |
1779 | break; | |
1780 | case C_CM_TXBEMPTY: | |
1781 | case C_CM_TXLOWWM: | |
1782 | case C_CM_INTBACK: | |
1783 | /* Transmission Interrupt */ | |
1da177e4 | 1784 | #ifdef CY_DEBUG_INTERRUPTS |
21719191 JS |
1785 | printk(KERN_DEBUG "cyz_interrupt: xmit intr, card %d, " |
1786 | "port %ld\n", info->card, channel); | |
1da177e4 | 1787 | #endif |
02f1175c JS |
1788 | cyz_handle_tx(info, ch_ctrl, buf_ctrl); |
1789 | break; | |
1790 | #endif /* CONFIG_CYZ_INTR */ | |
1791 | case C_CM_FATAL: | |
1792 | /* should do something with this !!! */ | |
1793 | break; | |
1794 | default: | |
1795 | break; | |
1796 | } | |
1797 | if (delta_count) | |
1798 | cy_sched_event(info, Cy_EVENT_DELTA_WAKEUP); | |
1799 | if (special_count) | |
1800 | tty_schedule_flip(tty); | |
1da177e4 | 1801 | } |
1da177e4 LT |
1802 | } |
1803 | ||
1804 | #ifdef CONFIG_CYZ_INTR | |
02f1175c | 1805 | static irqreturn_t cyz_interrupt(int irq, void *dev_id) |
1da177e4 | 1806 | { |
f7429034 | 1807 | struct cyclades_card *cinfo = dev_id; |
1da177e4 | 1808 | |
f7429034 | 1809 | if (unlikely(cinfo == NULL)) { |
1da177e4 | 1810 | #ifdef CY_DEBUG_INTERRUPTS |
21719191 | 1811 | printk(KERN_DEBUG "cyz_interrupt: spurious interrupt %d\n",irq); |
1da177e4 | 1812 | #endif |
02f1175c JS |
1813 | return IRQ_NONE; /* spurious interrupt */ |
1814 | } | |
1da177e4 | 1815 | |
f7429034 | 1816 | if (unlikely(!ISZLOADED(*cinfo))) { |
1da177e4 | 1817 | #ifdef CY_DEBUG_INTERRUPTS |
21719191 JS |
1818 | printk(KERN_DEBUG "cyz_interrupt: board not yet loaded " |
1819 | "(IRQ%d).\n", irq); | |
1da177e4 | 1820 | #endif |
02f1175c JS |
1821 | return IRQ_NONE; |
1822 | } | |
1da177e4 | 1823 | |
02f1175c JS |
1824 | /* Handle the interrupts */ |
1825 | cyz_handle_cmd(cinfo); | |
1da177e4 | 1826 | |
02f1175c JS |
1827 | return IRQ_HANDLED; |
1828 | } /* cyz_interrupt */ | |
1da177e4 | 1829 | |
02f1175c | 1830 | static void cyz_rx_restart(unsigned long arg) |
1da177e4 | 1831 | { |
02f1175c | 1832 | struct cyclades_port *info = (struct cyclades_port *)arg; |
875b206b | 1833 | struct cyclades_card *card = info->card; |
02f1175c | 1834 | int retval; |
875b206b | 1835 | __u32 channel = info->line - card->first_line; |
02f1175c JS |
1836 | unsigned long flags; |
1837 | ||
9fa1b3b1 | 1838 | spin_lock_irqsave(&card->card_lock, flags); |
875b206b | 1839 | retval = cyz_issue_cmd(card, channel, C_CM_INTBACK2, 0L); |
02f1175c | 1840 | if (retval != 0) { |
21719191 | 1841 | printk(KERN_ERR "cyc:cyz_rx_restart retval on ttyC%d was %x\n", |
02f1175c JS |
1842 | info->line, retval); |
1843 | } | |
9fa1b3b1 | 1844 | spin_unlock_irqrestore(&card->card_lock, flags); |
1da177e4 LT |
1845 | } |
1846 | ||
02f1175c | 1847 | #else /* CONFIG_CYZ_INTR */ |
1da177e4 | 1848 | |
02f1175c | 1849 | static void cyz_poll(unsigned long arg) |
1da177e4 | 1850 | { |
02f1175c JS |
1851 | struct cyclades_card *cinfo; |
1852 | struct cyclades_port *info; | |
1853 | struct tty_struct *tty; | |
ad39c300 JS |
1854 | static struct FIRM_ID *firm_id; |
1855 | static struct ZFW_CTRL *zfw_ctrl; | |
1856 | static struct BOARD_CTRL *board_ctrl; | |
1857 | static struct CH_CTRL *ch_ctrl; | |
1858 | static struct BUF_CTRL *buf_ctrl; | |
b7050906 | 1859 | unsigned long expires = jiffies + HZ; |
02f1175c | 1860 | int card, port; |
1da177e4 | 1861 | |
02f1175c JS |
1862 | for (card = 0; card < NR_CARDS; card++) { |
1863 | cinfo = &cy_card[card]; | |
1864 | ||
1865 | if (!IS_CYC_Z(*cinfo)) | |
1866 | continue; | |
1867 | if (!ISZLOADED(*cinfo)) | |
1868 | continue; | |
1869 | ||
1870 | firm_id = cinfo->base_addr + ID_ADDRESS; | |
1871 | zfw_ctrl = cinfo->base_addr + | |
db05c3b1 | 1872 | (readl(&firm_id->zfwctrl_addr) & 0xfffff); |
02f1175c | 1873 | board_ctrl = &(zfw_ctrl->board_ctrl); |
1da177e4 LT |
1874 | |
1875 | /* Skip first polling cycle to avoid racing conditions with the FW */ | |
02f1175c | 1876 | if (!cinfo->intr_enabled) { |
db05c3b1 | 1877 | cinfo->nports = (int)readl(&board_ctrl->n_channel); |
02f1175c JS |
1878 | cinfo->intr_enabled = 1; |
1879 | continue; | |
1880 | } | |
1da177e4 | 1881 | |
02f1175c | 1882 | cyz_handle_cmd(cinfo); |
1da177e4 | 1883 | |
02f1175c | 1884 | for (port = 0; port < cinfo->nports; port++) { |
dd025c0c | 1885 | info = &cinfo->ports[port]; |
02f1175c JS |
1886 | tty = info->tty; |
1887 | ch_ctrl = &(zfw_ctrl->ch_ctrl[port]); | |
1888 | buf_ctrl = &(zfw_ctrl->buf_ctrl[port]); | |
1da177e4 | 1889 | |
02f1175c JS |
1890 | if (!info->throttle) |
1891 | cyz_handle_rx(info, ch_ctrl, buf_ctrl); | |
1892 | cyz_handle_tx(info, ch_ctrl, buf_ctrl); | |
1893 | } | |
1894 | /* poll every 'cyz_polling_cycle' period */ | |
b7050906 | 1895 | expires = jiffies + cyz_polling_cycle; |
1da177e4 | 1896 | } |
b7050906 | 1897 | mod_timer(&cyz_timerlist, expires); |
02f1175c | 1898 | } /* cyz_poll */ |
1da177e4 | 1899 | |
02f1175c | 1900 | #endif /* CONFIG_CYZ_INTR */ |
1da177e4 LT |
1901 | |
1902 | /********** End of block of Cyclades-Z specific code *********/ | |
1903 | /***********************************************************/ | |
1904 | ||
1da177e4 LT |
1905 | /* This is called whenever a port becomes active; |
1906 | interrupts are enabled and DTR & RTS are turned on. | |
1907 | */ | |
02f1175c | 1908 | static int startup(struct cyclades_port *info) |
1da177e4 | 1909 | { |
875b206b | 1910 | struct cyclades_card *card; |
02f1175c JS |
1911 | unsigned long flags; |
1912 | int retval = 0; | |
1913 | void __iomem *base_addr; | |
875b206b | 1914 | int chip, channel, index; |
02f1175c | 1915 | unsigned long page; |
1da177e4 | 1916 | |
02f1175c | 1917 | card = info->card; |
875b206b | 1918 | channel = info->line - card->first_line; |
1da177e4 | 1919 | |
02f1175c JS |
1920 | page = get_zeroed_page(GFP_KERNEL); |
1921 | if (!page) | |
1922 | return -ENOMEM; | |
1da177e4 | 1923 | |
9fa1b3b1 | 1924 | spin_lock_irqsave(&card->card_lock, flags); |
1da177e4 | 1925 | |
02f1175c JS |
1926 | if (info->flags & ASYNC_INITIALIZED) { |
1927 | free_page(page); | |
1928 | goto errout; | |
1929 | } | |
1da177e4 | 1930 | |
02f1175c JS |
1931 | if (!info->type) { |
1932 | if (info->tty) { | |
1933 | set_bit(TTY_IO_ERROR, &info->tty->flags); | |
1934 | } | |
1935 | free_page(page); | |
1936 | goto errout; | |
1937 | } | |
1da177e4 | 1938 | |
02f1175c JS |
1939 | if (info->xmit_buf) |
1940 | free_page(page); | |
1941 | else | |
1942 | info->xmit_buf = (unsigned char *)page; | |
1da177e4 | 1943 | |
9fa1b3b1 | 1944 | spin_unlock_irqrestore(&card->card_lock, flags); |
1da177e4 | 1945 | |
02f1175c | 1946 | set_line_char(info); |
1da177e4 | 1947 | |
875b206b | 1948 | if (!IS_CYC_Z(*card)) { |
02f1175c JS |
1949 | chip = channel >> 2; |
1950 | channel &= 0x03; | |
875b206b JS |
1951 | index = card->bus_index; |
1952 | base_addr = card->base_addr + (cy_chip_offset[chip] << index); | |
1da177e4 LT |
1953 | |
1954 | #ifdef CY_DEBUG_OPEN | |
21719191 JS |
1955 | printk(KERN_DEBUG "cyc startup card %d, chip %d, channel %d, " |
1956 | "base_addr %p\n", | |
1957 | card, chip, channel, base_addr); | |
1da177e4 | 1958 | #endif |
9fa1b3b1 | 1959 | spin_lock_irqsave(&card->card_lock, flags); |
1da177e4 | 1960 | |
02f1175c | 1961 | cy_writeb(base_addr + (CyCAR << index), (u_char) channel); |
1da177e4 | 1962 | |
02f1175c JS |
1963 | cy_writeb(base_addr + (CyRTPR << index), |
1964 | (info->default_timeout ? info->default_timeout : 0x02)); | |
1965 | /* 10ms rx timeout */ | |
1da177e4 | 1966 | |
02f1175c JS |
1967 | cyy_issue_cmd(base_addr, CyCHAN_CTL | CyENB_RCVR | CyENB_XMTR, |
1968 | index); | |
1da177e4 | 1969 | |
02f1175c JS |
1970 | cy_writeb(base_addr + (CyCAR << index), (u_char) channel); |
1971 | cy_writeb(base_addr + (CyMSVR1 << index), CyRTS); | |
1972 | cy_writeb(base_addr + (CyMSVR2 << index), CyDTR); | |
1da177e4 LT |
1973 | |
1974 | #ifdef CY_DEBUG_DTR | |
21719191 JS |
1975 | printk(KERN_DEBUG "cyc:startup raising DTR\n"); |
1976 | printk(KERN_DEBUG " status: 0x%x, 0x%x\n", | |
db05c3b1 JS |
1977 | readb(base_addr + (CyMSVR1 << index)), |
1978 | readb(base_addr + (CyMSVR2 << index))); | |
1da177e4 LT |
1979 | #endif |
1980 | ||
02f1175c | 1981 | cy_writeb(base_addr + (CySRER << index), |
db05c3b1 | 1982 | readb(base_addr + (CySRER << index)) | CyRxData); |
02f1175c | 1983 | info->flags |= ASYNC_INITIALIZED; |
1da177e4 | 1984 | |
02f1175c JS |
1985 | if (info->tty) { |
1986 | clear_bit(TTY_IO_ERROR, &info->tty->flags); | |
1987 | } | |
1988 | info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; | |
1989 | info->breakon = info->breakoff = 0; | |
1990 | memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats)); | |
1991 | info->idle_stats.in_use = | |
1992 | info->idle_stats.recv_idle = | |
1993 | info->idle_stats.xmit_idle = jiffies; | |
1da177e4 | 1994 | |
9fa1b3b1 | 1995 | spin_unlock_irqrestore(&card->card_lock, flags); |
1da177e4 | 1996 | |
02f1175c JS |
1997 | } else { |
1998 | struct FIRM_ID __iomem *firm_id; | |
1999 | struct ZFW_CTRL __iomem *zfw_ctrl; | |
2000 | struct BOARD_CTRL __iomem *board_ctrl; | |
2001 | struct CH_CTRL __iomem *ch_ctrl; | |
2002 | int retval; | |
1da177e4 | 2003 | |
875b206b | 2004 | base_addr = card->base_addr; |
1da177e4 | 2005 | |
02f1175c | 2006 | firm_id = base_addr + ID_ADDRESS; |
875b206b | 2007 | if (!ISZLOADED(*card)) { |
02f1175c JS |
2008 | return -ENODEV; |
2009 | } | |
1da177e4 | 2010 | |
875b206b | 2011 | zfw_ctrl = card->base_addr + |
db05c3b1 | 2012 | (readl(&firm_id->zfwctrl_addr) & 0xfffff); |
02f1175c JS |
2013 | board_ctrl = &zfw_ctrl->board_ctrl; |
2014 | ch_ctrl = zfw_ctrl->ch_ctrl; | |
1da177e4 LT |
2015 | |
2016 | #ifdef CY_DEBUG_OPEN | |
21719191 JS |
2017 | printk(KERN_DEBUG "cyc startup Z card %d, channel %d, " |
2018 | "base_addr %p\n", card, channel, base_addr); | |
1da177e4 | 2019 | #endif |
9fa1b3b1 | 2020 | spin_lock_irqsave(&card->card_lock, flags); |
1da177e4 | 2021 | |
02f1175c | 2022 | cy_writel(&ch_ctrl[channel].op_mode, C_CH_ENABLE); |
1da177e4 LT |
2023 | #ifdef Z_WAKE |
2024 | #ifdef CONFIG_CYZ_INTR | |
02f1175c JS |
2025 | cy_writel(&ch_ctrl[channel].intr_enable, |
2026 | C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM | | |
2027 | C_IN_RXNNDT | C_IN_IOCTLW | C_IN_MDCD); | |
1da177e4 | 2028 | #else |
02f1175c JS |
2029 | cy_writel(&ch_ctrl[channel].intr_enable, |
2030 | C_IN_IOCTLW | C_IN_MDCD); | |
2031 | #endif /* CONFIG_CYZ_INTR */ | |
1da177e4 LT |
2032 | #else |
2033 | #ifdef CONFIG_CYZ_INTR | |
02f1175c JS |
2034 | cy_writel(&ch_ctrl[channel].intr_enable, |
2035 | C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM | | |
2036 | C_IN_RXNNDT | C_IN_MDCD); | |
1da177e4 | 2037 | #else |
02f1175c JS |
2038 | cy_writel(&ch_ctrl[channel].intr_enable, C_IN_MDCD); |
2039 | #endif /* CONFIG_CYZ_INTR */ | |
2040 | #endif /* Z_WAKE */ | |
2041 | ||
875b206b | 2042 | retval = cyz_issue_cmd(card, channel, C_CM_IOCTL, 0L); |
02f1175c | 2043 | if (retval != 0) { |
21719191 JS |
2044 | printk(KERN_ERR "cyc:startup(1) retval on ttyC%d was " |
2045 | "%x\n", info->line, retval); | |
02f1175c | 2046 | } |
1da177e4 | 2047 | |
02f1175c | 2048 | /* Flush RX buffers before raising DTR and RTS */ |
875b206b | 2049 | retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_RX, 0L); |
02f1175c | 2050 | if (retval != 0) { |
21719191 JS |
2051 | printk(KERN_ERR "cyc:startup(2) retval on ttyC%d was " |
2052 | "%x\n", info->line, retval); | |
02f1175c | 2053 | } |
1da177e4 | 2054 | |
02f1175c JS |
2055 | /* set timeout !!! */ |
2056 | /* set RTS and DTR !!! */ | |
2057 | cy_writel(&ch_ctrl[channel].rs_control, | |
db05c3b1 | 2058 | readl(&ch_ctrl[channel].rs_control) | C_RS_RTS | |
02f1175c | 2059 | C_RS_DTR); |
9fa1b3b1 | 2060 | retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L); |
02f1175c | 2061 | if (retval != 0) { |
21719191 JS |
2062 | printk(KERN_ERR "cyc:startup(3) retval on ttyC%d was " |
2063 | "%x\n", info->line, retval); | |
02f1175c | 2064 | } |
1da177e4 | 2065 | #ifdef CY_DEBUG_DTR |
21719191 | 2066 | printk(KERN_DEBUG "cyc:startup raising Z DTR\n"); |
1da177e4 LT |
2067 | #endif |
2068 | ||
02f1175c JS |
2069 | /* enable send, recv, modem !!! */ |
2070 | ||
2071 | info->flags |= ASYNC_INITIALIZED; | |
2072 | if (info->tty) { | |
2073 | clear_bit(TTY_IO_ERROR, &info->tty->flags); | |
2074 | } | |
2075 | info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; | |
2076 | info->breakon = info->breakoff = 0; | |
2077 | memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats)); | |
2078 | info->idle_stats.in_use = | |
2079 | info->idle_stats.recv_idle = | |
2080 | info->idle_stats.xmit_idle = jiffies; | |
1da177e4 | 2081 | |
9fa1b3b1 | 2082 | spin_unlock_irqrestore(&card->card_lock, flags); |
1da177e4 | 2083 | } |
1da177e4 LT |
2084 | |
2085 | #ifdef CY_DEBUG_OPEN | |
21719191 | 2086 | printk(KERN_DEBUG "cyc startup done\n"); |
1da177e4 LT |
2087 | #endif |
2088 | return 0; | |
2089 | ||
2090 | errout: | |
9fa1b3b1 | 2091 | spin_unlock_irqrestore(&card->card_lock, flags); |
1da177e4 | 2092 | return retval; |
02f1175c | 2093 | } /* startup */ |
1da177e4 | 2094 | |
02f1175c | 2095 | static void start_xmit(struct cyclades_port *info) |
1da177e4 | 2096 | { |
875b206b | 2097 | struct cyclades_card *card; |
02f1175c JS |
2098 | unsigned long flags; |
2099 | void __iomem *base_addr; | |
875b206b | 2100 | int chip, channel, index; |
1da177e4 | 2101 | |
02f1175c | 2102 | card = info->card; |
875b206b JS |
2103 | channel = info->line - card->first_line; |
2104 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
2105 | chip = channel >> 2; |
2106 | channel &= 0x03; | |
875b206b JS |
2107 | index = card->bus_index; |
2108 | base_addr = card->base_addr + (cy_chip_offset[chip] << index); | |
02f1175c | 2109 | |
9fa1b3b1 | 2110 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
2111 | cy_writeb(base_addr + (CyCAR << index), channel); |
2112 | cy_writeb(base_addr + (CySRER << index), | |
db05c3b1 | 2113 | readb(base_addr + (CySRER << index)) | CyTxRdy); |
9fa1b3b1 | 2114 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c | 2115 | } else { |
1da177e4 | 2116 | #ifdef CONFIG_CYZ_INTR |
02f1175c | 2117 | int retval; |
1da177e4 | 2118 | |
9fa1b3b1 | 2119 | spin_lock_irqsave(&card->card_lock, flags); |
875b206b | 2120 | retval = cyz_issue_cmd(card, channel, C_CM_INTBACK, 0L); |
02f1175c | 2121 | if (retval != 0) { |
21719191 JS |
2122 | printk(KERN_ERR "cyc:start_xmit retval on ttyC%d was " |
2123 | "%x\n", info->line, retval); | |
02f1175c | 2124 | } |
9fa1b3b1 | 2125 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
2126 | #else /* CONFIG_CYZ_INTR */ |
2127 | /* Don't have to do anything at this time */ | |
2128 | #endif /* CONFIG_CYZ_INTR */ | |
2129 | } | |
2130 | } /* start_xmit */ | |
1da177e4 LT |
2131 | |
2132 | /* | |
2133 | * This routine shuts down a serial port; interrupts are disabled, | |
2134 | * and DTR is dropped if the hangup on close termio flag is on. | |
2135 | */ | |
02f1175c | 2136 | static void shutdown(struct cyclades_port *info) |
1da177e4 | 2137 | { |
875b206b | 2138 | struct cyclades_card *card; |
02f1175c JS |
2139 | unsigned long flags; |
2140 | void __iomem *base_addr; | |
875b206b | 2141 | int chip, channel, index; |
02f1175c JS |
2142 | |
2143 | if (!(info->flags & ASYNC_INITIALIZED)) { | |
2144 | return; | |
2145 | } | |
2146 | ||
2147 | card = info->card; | |
875b206b JS |
2148 | channel = info->line - card->first_line; |
2149 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
2150 | chip = channel >> 2; |
2151 | channel &= 0x03; | |
875b206b JS |
2152 | index = card->bus_index; |
2153 | base_addr = card->base_addr + (cy_chip_offset[chip] << index); | |
1da177e4 LT |
2154 | |
2155 | #ifdef CY_DEBUG_OPEN | |
21719191 JS |
2156 | printk(KERN_DEBUG "cyc shutdown Y card %d, chip %d, " |
2157 | "channel %d, base_addr %p\n", | |
2158 | card, chip, channel, base_addr); | |
1da177e4 LT |
2159 | #endif |
2160 | ||
9fa1b3b1 | 2161 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
2162 | |
2163 | /* Clear delta_msr_wait queue to avoid mem leaks. */ | |
2164 | wake_up_interruptible(&info->delta_msr_wait); | |
1da177e4 | 2165 | |
02f1175c JS |
2166 | if (info->xmit_buf) { |
2167 | unsigned char *temp; | |
2168 | temp = info->xmit_buf; | |
2169 | info->xmit_buf = NULL; | |
2170 | free_page((unsigned long)temp); | |
2171 | } | |
2172 | cy_writeb(base_addr + (CyCAR << index), (u_char) channel); | |
2173 | if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) { | |
2174 | cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS); | |
2175 | cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR); | |
1da177e4 | 2176 | #ifdef CY_DEBUG_DTR |
21719191 JS |
2177 | printk(KERN_DEBUG "cyc shutdown dropping DTR\n"); |
2178 | printk(KERN_DEBUG " status: 0x%x, 0x%x\n", | |
db05c3b1 JS |
2179 | readb(base_addr + (CyMSVR1 << index)), |
2180 | readb(base_addr + (CyMSVR2 << index))); | |
1da177e4 | 2181 | #endif |
02f1175c JS |
2182 | } |
2183 | cyy_issue_cmd(base_addr, CyCHAN_CTL | CyDIS_RCVR, index); | |
2184 | /* it may be appropriate to clear _XMIT at | |
2185 | some later date (after testing)!!! */ | |
2186 | ||
2187 | if (info->tty) { | |
2188 | set_bit(TTY_IO_ERROR, &info->tty->flags); | |
2189 | } | |
2190 | info->flags &= ~ASYNC_INITIALIZED; | |
9fa1b3b1 | 2191 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
2192 | } else { |
2193 | struct FIRM_ID __iomem *firm_id; | |
2194 | struct ZFW_CTRL __iomem *zfw_ctrl; | |
2195 | struct BOARD_CTRL __iomem *board_ctrl; | |
2196 | struct CH_CTRL __iomem *ch_ctrl; | |
2197 | int retval; | |
2198 | ||
875b206b | 2199 | base_addr = card->base_addr; |
1da177e4 | 2200 | #ifdef CY_DEBUG_OPEN |
21719191 JS |
2201 | printk(KERN_DEBUG "cyc shutdown Z card %d, channel %d, " |
2202 | "base_addr %p\n", card, channel, base_addr); | |
1da177e4 LT |
2203 | #endif |
2204 | ||
02f1175c | 2205 | firm_id = base_addr + ID_ADDRESS; |
875b206b | 2206 | if (!ISZLOADED(*card)) { |
02f1175c JS |
2207 | return; |
2208 | } | |
1da177e4 | 2209 | |
875b206b | 2210 | zfw_ctrl = card->base_addr + |
db05c3b1 | 2211 | (readl(&firm_id->zfwctrl_addr) & 0xfffff); |
02f1175c JS |
2212 | board_ctrl = &zfw_ctrl->board_ctrl; |
2213 | ch_ctrl = zfw_ctrl->ch_ctrl; | |
1da177e4 | 2214 | |
9fa1b3b1 | 2215 | spin_lock_irqsave(&card->card_lock, flags); |
1da177e4 | 2216 | |
02f1175c JS |
2217 | if (info->xmit_buf) { |
2218 | unsigned char *temp; | |
2219 | temp = info->xmit_buf; | |
2220 | info->xmit_buf = NULL; | |
2221 | free_page((unsigned long)temp); | |
1da177e4 | 2222 | } |
02f1175c JS |
2223 | |
2224 | if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) { | |
2225 | cy_writel(&ch_ctrl[channel].rs_control, | |
db05c3b1 | 2226 | (__u32)(readl(&ch_ctrl[channel].rs_control) & |
02f1175c | 2227 | ~(C_RS_RTS | C_RS_DTR))); |
875b206b | 2228 | retval = cyz_issue_cmd(info->card, channel, |
02f1175c JS |
2229 | C_CM_IOCTLM, 0L); |
2230 | if (retval != 0) { | |
21719191 JS |
2231 | printk(KERN_ERR"cyc:shutdown retval on ttyC%d " |
2232 | "was %x\n", info->line, retval); | |
02f1175c | 2233 | } |
1da177e4 | 2234 | #ifdef CY_DEBUG_DTR |
21719191 | 2235 | printk(KERN_DEBUG "cyc:shutdown dropping Z DTR\n"); |
1da177e4 | 2236 | #endif |
02f1175c | 2237 | } |
1da177e4 | 2238 | |
02f1175c JS |
2239 | if (info->tty) { |
2240 | set_bit(TTY_IO_ERROR, &info->tty->flags); | |
2241 | } | |
2242 | info->flags &= ~ASYNC_INITIALIZED; | |
2243 | ||
9fa1b3b1 | 2244 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c | 2245 | } |
1da177e4 LT |
2246 | |
2247 | #ifdef CY_DEBUG_OPEN | |
21719191 | 2248 | printk(KERN_DEBUG "cyc shutdown done\n"); |
1da177e4 | 2249 | #endif |
02f1175c | 2250 | } /* shutdown */ |
1da177e4 LT |
2251 | |
2252 | /* | |
2253 | * ------------------------------------------------------------ | |
2254 | * cy_open() and friends | |
2255 | * ------------------------------------------------------------ | |
2256 | */ | |
2257 | ||
2258 | static int | |
02f1175c JS |
2259 | block_til_ready(struct tty_struct *tty, struct file *filp, |
2260 | struct cyclades_port *info) | |
1da177e4 | 2261 | { |
02f1175c JS |
2262 | DECLARE_WAITQUEUE(wait, current); |
2263 | struct cyclades_card *cinfo; | |
2264 | unsigned long flags; | |
2265 | int chip, channel, index; | |
2266 | int retval; | |
2267 | void __iomem *base_addr; | |
2268 | ||
875b206b | 2269 | cinfo = info->card; |
02f1175c JS |
2270 | channel = info->line - cinfo->first_line; |
2271 | ||
2272 | /* | |
2273 | * If the device is in the middle of being closed, then block | |
2274 | * until it's done, and then try again. | |
2275 | */ | |
2276 | if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { | |
2c7fea99 JS |
2277 | wait_event_interruptible(info->close_wait, |
2278 | !(info->flags & ASYNC_CLOSING)); | |
096dcfce | 2279 | return (info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS; |
1da177e4 | 2280 | } |
02f1175c JS |
2281 | |
2282 | /* | |
2283 | * If non-blocking mode is set, then make the check up front | |
2284 | * and then exit. | |
2285 | */ | |
2286 | if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { | |
2287 | info->flags |= ASYNC_NORMAL_ACTIVE; | |
2288 | return 0; | |
2289 | } | |
2290 | ||
2291 | /* | |
2292 | * Block waiting for the carrier detect and the line to become | |
2293 | * free (i.e., not in use by the callout). While we are in | |
2294 | * this loop, info->count is dropped by one, so that | |
2295 | * cy_close() knows when to free things. We restore it upon | |
2296 | * exit, either normal or abnormal. | |
2297 | */ | |
2298 | retval = 0; | |
2299 | add_wait_queue(&info->open_wait, &wait); | |
1da177e4 | 2300 | #ifdef CY_DEBUG_OPEN |
21719191 JS |
2301 | printk(KERN_DEBUG "cyc block_til_ready before block: ttyC%d, " |
2302 | "count = %d\n", info->line, info->count); | |
1da177e4 | 2303 | #endif |
9fa1b3b1 | 2304 | spin_lock_irqsave(&cinfo->card_lock, flags); |
02f1175c JS |
2305 | if (!tty_hung_up_p(filp)) |
2306 | info->count--; | |
9fa1b3b1 | 2307 | spin_unlock_irqrestore(&cinfo->card_lock, flags); |
1da177e4 | 2308 | #ifdef CY_DEBUG_COUNT |
21719191 JS |
2309 | printk(KERN_DEBUG "cyc block_til_ready: (%d): decrementing count to " |
2310 | "%d\n", current->pid, info->count); | |
1da177e4 | 2311 | #endif |
02f1175c JS |
2312 | info->blocked_open++; |
2313 | ||
2314 | if (!IS_CYC_Z(*cinfo)) { | |
2315 | chip = channel >> 2; | |
2316 | channel &= 0x03; | |
2317 | index = cinfo->bus_index; | |
2318 | base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index); | |
2319 | ||
2320 | while (1) { | |
9fa1b3b1 | 2321 | spin_lock_irqsave(&cinfo->card_lock, flags); |
02f1175c JS |
2322 | if ((tty->termios->c_cflag & CBAUD)) { |
2323 | cy_writeb(base_addr + (CyCAR << index), | |
2324 | (u_char) channel); | |
2325 | cy_writeb(base_addr + (CyMSVR1 << index), | |
2326 | CyRTS); | |
2327 | cy_writeb(base_addr + (CyMSVR2 << index), | |
2328 | CyDTR); | |
1da177e4 | 2329 | #ifdef CY_DEBUG_DTR |
21719191 JS |
2330 | printk(KERN_DEBUG "cyc:block_til_ready raising " |
2331 | "DTR\n"); | |
2332 | printk(KERN_DEBUG " status: 0x%x, 0x%x\n", | |
db05c3b1 JS |
2333 | readb(base_addr + (CyMSVR1 << index)), |
2334 | readb(base_addr + (CyMSVR2 << index))); | |
1da177e4 | 2335 | #endif |
02f1175c | 2336 | } |
9fa1b3b1 | 2337 | spin_unlock_irqrestore(&cinfo->card_lock, flags); |
1da177e4 | 2338 | |
02f1175c JS |
2339 | set_current_state(TASK_INTERRUPTIBLE); |
2340 | if (tty_hung_up_p(filp) || | |
2341 | !(info->flags & ASYNC_INITIALIZED)) { | |
2342 | retval = ((info->flags & ASYNC_HUP_NOTIFY) ? | |
2343 | -EAGAIN : -ERESTARTSYS); | |
2344 | break; | |
2345 | } | |
1da177e4 | 2346 | |
9fa1b3b1 | 2347 | spin_lock_irqsave(&cinfo->card_lock, flags); |
02f1175c JS |
2348 | cy_writeb(base_addr + (CyCAR << index), |
2349 | (u_char) channel); | |
2350 | if (!(info->flags & ASYNC_CLOSING) && (C_CLOCAL(tty) || | |
db05c3b1 | 2351 | (readb(base_addr + |
02f1175c | 2352 | (CyMSVR1 << index)) & CyDCD))) { |
9fa1b3b1 | 2353 | spin_unlock_irqrestore(&cinfo->card_lock, flags); |
02f1175c JS |
2354 | break; |
2355 | } | |
9fa1b3b1 | 2356 | spin_unlock_irqrestore(&cinfo->card_lock, flags); |
1da177e4 | 2357 | |
02f1175c JS |
2358 | if (signal_pending(current)) { |
2359 | retval = -ERESTARTSYS; | |
2360 | break; | |
2361 | } | |
1da177e4 | 2362 | #ifdef CY_DEBUG_OPEN |
21719191 JS |
2363 | printk(KERN_DEBUG "cyc block_til_ready blocking: " |
2364 | "ttyC%d, count = %d\n", | |
2365 | info->line, info->count); | |
1da177e4 | 2366 | #endif |
02f1175c | 2367 | schedule(); |
1da177e4 | 2368 | } |
02f1175c JS |
2369 | } else { |
2370 | struct FIRM_ID __iomem *firm_id; | |
2371 | struct ZFW_CTRL __iomem *zfw_ctrl; | |
2372 | struct BOARD_CTRL __iomem *board_ctrl; | |
2373 | struct CH_CTRL __iomem *ch_ctrl; | |
2374 | int retval; | |
2375 | ||
2376 | base_addr = cinfo->base_addr; | |
2377 | firm_id = base_addr + ID_ADDRESS; | |
2378 | if (!ISZLOADED(*cinfo)) { | |
cc0a8fbb | 2379 | __set_current_state(TASK_RUNNING); |
02f1175c JS |
2380 | remove_wait_queue(&info->open_wait, &wait); |
2381 | return -EINVAL; | |
2382 | } | |
2383 | ||
db05c3b1 | 2384 | zfw_ctrl = base_addr + (readl(&firm_id->zfwctrl_addr)& 0xfffff); |
02f1175c JS |
2385 | board_ctrl = &zfw_ctrl->board_ctrl; |
2386 | ch_ctrl = zfw_ctrl->ch_ctrl; | |
2387 | ||
2388 | while (1) { | |
2389 | if ((tty->termios->c_cflag & CBAUD)) { | |
2390 | cy_writel(&ch_ctrl[channel].rs_control, | |
db05c3b1 JS |
2391 | readl(&ch_ctrl[channel].rs_control) | |
2392 | C_RS_RTS | C_RS_DTR); | |
9fa1b3b1 | 2393 | retval = cyz_issue_cmd(cinfo, |
db05c3b1 | 2394 | channel, C_CM_IOCTLM, 0L); |
02f1175c | 2395 | if (retval != 0) { |
21719191 JS |
2396 | printk(KERN_ERR "cyc:block_til_ready " |
2397 | "retval on ttyC%d was %x\n", | |
02f1175c JS |
2398 | info->line, retval); |
2399 | } | |
1da177e4 | 2400 | #ifdef CY_DEBUG_DTR |
21719191 JS |
2401 | printk(KERN_DEBUG "cyc:block_til_ready raising " |
2402 | "Z DTR\n"); | |
1da177e4 | 2403 | #endif |
02f1175c | 2404 | } |
1da177e4 | 2405 | |
02f1175c JS |
2406 | set_current_state(TASK_INTERRUPTIBLE); |
2407 | if (tty_hung_up_p(filp) || | |
2408 | !(info->flags & ASYNC_INITIALIZED)) { | |
2409 | retval = ((info->flags & ASYNC_HUP_NOTIFY) ? | |
2410 | -EAGAIN : -ERESTARTSYS); | |
2411 | break; | |
2412 | } | |
2413 | if (!(info->flags & ASYNC_CLOSING) && (C_CLOCAL(tty) || | |
db05c3b1 | 2414 | (readl(&ch_ctrl[channel].rs_status) & |
02f1175c JS |
2415 | C_RS_DCD))) { |
2416 | break; | |
2417 | } | |
2418 | if (signal_pending(current)) { | |
2419 | retval = -ERESTARTSYS; | |
2420 | break; | |
2421 | } | |
1da177e4 | 2422 | #ifdef CY_DEBUG_OPEN |
21719191 JS |
2423 | printk(KERN_DEBUG "cyc block_til_ready blocking: " |
2424 | "ttyC%d, count = %d\n", | |
2425 | info->line, info->count); | |
1da177e4 | 2426 | #endif |
02f1175c JS |
2427 | schedule(); |
2428 | } | |
1da177e4 | 2429 | } |
cc0a8fbb | 2430 | __set_current_state(TASK_RUNNING); |
02f1175c JS |
2431 | remove_wait_queue(&info->open_wait, &wait); |
2432 | if (!tty_hung_up_p(filp)) { | |
2433 | info->count++; | |
1da177e4 | 2434 | #ifdef CY_DEBUG_COUNT |
21719191 JS |
2435 | printk(KERN_DEBUG "cyc:block_til_ready (%d): incrementing " |
2436 | "count to %d\n", current->pid, info->count); | |
1da177e4 | 2437 | #endif |
02f1175c JS |
2438 | } |
2439 | info->blocked_open--; | |
1da177e4 | 2440 | #ifdef CY_DEBUG_OPEN |
21719191 JS |
2441 | printk(KERN_DEBUG "cyc:block_til_ready after blocking: ttyC%d, " |
2442 | "count = %d\n", info->line, info->count); | |
1da177e4 | 2443 | #endif |
02f1175c JS |
2444 | if (retval) |
2445 | return retval; | |
2446 | info->flags |= ASYNC_NORMAL_ACTIVE; | |
2447 | return 0; | |
2448 | } /* block_til_ready */ | |
1da177e4 LT |
2449 | |
2450 | /* | |
2451 | * This routine is called whenever a serial port is opened. It | |
2452 | * performs the serial-specific initialization for the tty structure. | |
2453 | */ | |
02f1175c | 2454 | static int cy_open(struct tty_struct *tty, struct file *filp) |
1da177e4 | 2455 | { |
02f1175c | 2456 | struct cyclades_port *info; |
dd025c0c | 2457 | unsigned int i; |
02f1175c | 2458 | int retval, line; |
1da177e4 | 2459 | |
02f1175c JS |
2460 | line = tty->index; |
2461 | if ((line < 0) || (NR_PORTS <= line)) { | |
2462 | return -ENODEV; | |
2463 | } | |
dd025c0c JS |
2464 | for (i = 0; i < NR_CARDS; i++) |
2465 | if (line < cy_card[i].first_line + cy_card[i].nports && | |
2466 | line >= cy_card[i].first_line) | |
2467 | break; | |
2468 | if (i >= NR_CARDS) | |
2469 | return -ENODEV; | |
2470 | info = &cy_card[i].ports[line - cy_card[i].first_line]; | |
02f1175c JS |
2471 | if (info->line < 0) { |
2472 | return -ENODEV; | |
2473 | } | |
1da177e4 | 2474 | |
02f1175c JS |
2475 | /* If the card's firmware hasn't been loaded, |
2476 | treat it as absent from the system. This | |
2477 | will make the user pay attention. | |
2478 | */ | |
875b206b JS |
2479 | if (IS_CYC_Z(*info->card)) { |
2480 | struct cyclades_card *cinfo = info->card; | |
02f1175c JS |
2481 | struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS; |
2482 | ||
2483 | if (!ISZLOADED(*cinfo)) { | |
db05c3b1 | 2484 | if (((ZE_V1 == readl(&((struct RUNTIME_9060 __iomem *) |
02f1175c JS |
2485 | (cinfo->ctl_addr))->mail_box_0)) && |
2486 | Z_FPGA_CHECK(*cinfo)) && | |
db05c3b1 | 2487 | (ZFIRM_HLT == readl( |
02f1175c | 2488 | &firm_id->signature))) { |
21719191 JS |
2489 | printk(KERN_ERR "cyc:Cyclades-Z Error: you " |
2490 | "need an external power supply for " | |
2491 | "this number of ports.\nFirmware " | |
2492 | "halted.\n"); | |
02f1175c | 2493 | } else { |
21719191 JS |
2494 | printk(KERN_ERR "cyc:Cyclades-Z firmware not " |
2495 | "yet loaded\n"); | |
02f1175c JS |
2496 | } |
2497 | return -ENODEV; | |
2498 | } | |
2499 | #ifdef CONFIG_CYZ_INTR | |
2500 | else { | |
2501 | /* In case this Z board is operating in interrupt mode, its | |
2502 | interrupts should be enabled as soon as the first open | |
2503 | happens to one of its ports. */ | |
2504 | if (!cinfo->intr_enabled) { | |
2505 | struct ZFW_CTRL __iomem *zfw_ctrl; | |
2506 | struct BOARD_CTRL __iomem *board_ctrl; | |
2507 | ||
2508 | zfw_ctrl = cinfo->base_addr + | |
db05c3b1 JS |
2509 | (readl(&firm_id->zfwctrl_addr) & |
2510 | 0xfffff); | |
02f1175c JS |
2511 | |
2512 | board_ctrl = &zfw_ctrl->board_ctrl; | |
2513 | ||
2514 | /* Enable interrupts on the PLX chip */ | |
2515 | cy_writew(cinfo->ctl_addr + 0x68, | |
db05c3b1 | 2516 | readw(cinfo->ctl_addr + 0x68) | 0x0900); |
02f1175c JS |
2517 | /* Enable interrupts on the FW */ |
2518 | retval = cyz_issue_cmd(cinfo, 0, | |
2519 | C_CM_IRQ_ENBL, 0L); | |
2520 | if (retval != 0) { | |
21719191 JS |
2521 | printk(KERN_ERR "cyc:IRQ enable retval " |
2522 | "was %x\n", retval); | |
02f1175c JS |
2523 | } |
2524 | cinfo->nports = | |
db05c3b1 | 2525 | (int)readl(&board_ctrl->n_channel); |
02f1175c JS |
2526 | cinfo->intr_enabled = 1; |
2527 | } | |
1da177e4 | 2528 | } |
02f1175c JS |
2529 | #endif /* CONFIG_CYZ_INTR */ |
2530 | /* Make sure this Z port really exists in hardware */ | |
2531 | if (info->line > (cinfo->first_line + cinfo->nports - 1)) | |
2532 | return -ENODEV; | |
1da177e4 | 2533 | } |
1da177e4 | 2534 | #ifdef CY_DEBUG_OTHER |
21719191 | 2535 | printk(KERN_DEBUG "cyc:cy_open ttyC%d\n", info->line); |
1da177e4 | 2536 | #endif |
02f1175c JS |
2537 | tty->driver_data = info; |
2538 | info->tty = tty; | |
2539 | if (serial_paranoia_check(info, tty->name, "cy_open")) { | |
2540 | return -ENODEV; | |
2541 | } | |
1da177e4 | 2542 | #ifdef CY_DEBUG_OPEN |
21719191 JS |
2543 | printk(KERN_DEBUG "cyc:cy_open ttyC%d, count = %d\n", info->line, |
2544 | info->count); | |
1da177e4 | 2545 | #endif |
02f1175c | 2546 | info->count++; |
1da177e4 | 2547 | #ifdef CY_DEBUG_COUNT |
21719191 | 2548 | printk(KERN_DEBUG "cyc:cy_open (%d): incrementing count to %d\n", |
02f1175c | 2549 | current->pid, info->count); |
1da177e4 | 2550 | #endif |
1da177e4 | 2551 | |
02f1175c JS |
2552 | /* |
2553 | * If the port is the middle of closing, bail out now | |
2554 | */ | |
2555 | if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { | |
2c7fea99 JS |
2556 | wait_event_interruptible(info->close_wait, |
2557 | !(info->flags & ASYNC_CLOSING)); | |
096dcfce | 2558 | return (info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS; |
02f1175c | 2559 | } |
1da177e4 | 2560 | |
02f1175c JS |
2561 | /* |
2562 | * Start up serial port | |
2563 | */ | |
2564 | retval = startup(info); | |
2565 | if (retval) { | |
2566 | return retval; | |
2567 | } | |
1da177e4 | 2568 | |
02f1175c JS |
2569 | retval = block_til_ready(tty, filp, info); |
2570 | if (retval) { | |
1da177e4 | 2571 | #ifdef CY_DEBUG_OPEN |
21719191 JS |
2572 | printk(KERN_DEBUG "cyc:cy_open returning after block_til_ready " |
2573 | "with %d\n", retval); | |
1da177e4 | 2574 | #endif |
02f1175c JS |
2575 | return retval; |
2576 | } | |
1da177e4 | 2577 | |
02f1175c | 2578 | info->throttle = 0; |
1da177e4 | 2579 | |
02f1175c | 2580 | #ifdef CY_DEBUG_OPEN |
21719191 | 2581 | printk(KERN_DEBUG "cyc:cy_open done\n"); |
02f1175c JS |
2582 | #endif |
2583 | return 0; | |
2584 | } /* cy_open */ | |
1da177e4 LT |
2585 | |
2586 | /* | |
2587 | * cy_wait_until_sent() --- wait until the transmitter is empty | |
2588 | */ | |
02f1175c | 2589 | static void cy_wait_until_sent(struct tty_struct *tty, int timeout) |
1da177e4 | 2590 | { |
875b206b | 2591 | struct cyclades_card *card; |
cab9bdd1 | 2592 | struct cyclades_port *info = tty->driver_data; |
02f1175c | 2593 | void __iomem *base_addr; |
875b206b | 2594 | int chip, channel, index; |
02f1175c JS |
2595 | unsigned long orig_jiffies; |
2596 | int char_time; | |
2597 | ||
2598 | if (serial_paranoia_check(info, tty->name, "cy_wait_until_sent")) | |
2599 | return; | |
2600 | ||
2601 | if (info->xmit_fifo_size == 0) | |
2602 | return; /* Just in case.... */ | |
1da177e4 | 2603 | |
02f1175c JS |
2604 | orig_jiffies = jiffies; |
2605 | /* | |
2606 | * Set the check interval to be 1/5 of the estimated time to | |
2607 | * send a single character, and make it at least 1. The check | |
2608 | * interval should also be less than the timeout. | |
2609 | * | |
2610 | * Note: we have to use pretty tight timings here to satisfy | |
2611 | * the NIST-PCTS. | |
2612 | */ | |
2613 | char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size; | |
2614 | char_time = char_time / 5; | |
2615 | if (char_time <= 0) | |
2616 | char_time = 1; | |
2617 | if (timeout < 0) | |
2618 | timeout = 0; | |
2619 | if (timeout) | |
2620 | char_time = min(char_time, timeout); | |
2621 | /* | |
2622 | * If the transmitter hasn't cleared in twice the approximate | |
2623 | * amount of time to send the entire FIFO, it probably won't | |
2624 | * ever clear. This assumes the UART isn't doing flow | |
2625 | * control, which is currently the case. Hence, if it ever | |
2626 | * takes longer than info->timeout, this is probably due to a | |
2627 | * UART bug of some kind. So, we clamp the timeout parameter at | |
2628 | * 2*info->timeout. | |
2629 | */ | |
2630 | if (!timeout || timeout > 2 * info->timeout) | |
2631 | timeout = 2 * info->timeout; | |
1da177e4 | 2632 | #ifdef CY_DEBUG_WAIT_UNTIL_SENT |
21719191 JS |
2633 | printk(KERN_DEBUG "In cy_wait_until_sent(%d) check=%d, jiff=%lu...", |
2634 | timeout, char_time, jiffies); | |
1da177e4 | 2635 | #endif |
02f1175c | 2636 | card = info->card; |
875b206b JS |
2637 | channel = (info->line) - (card->first_line); |
2638 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
2639 | chip = channel >> 2; |
2640 | channel &= 0x03; | |
875b206b JS |
2641 | index = card->bus_index; |
2642 | base_addr = card->base_addr + (cy_chip_offset[chip] << index); | |
db05c3b1 | 2643 | while (readb(base_addr + (CySRER << index)) & CyTxRdy) { |
1da177e4 | 2644 | #ifdef CY_DEBUG_WAIT_UNTIL_SENT |
21719191 | 2645 | printk(KERN_DEBUG "Not clean (jiff=%lu)...", jiffies); |
1da177e4 | 2646 | #endif |
02f1175c JS |
2647 | if (msleep_interruptible(jiffies_to_msecs(char_time))) |
2648 | break; | |
2649 | if (timeout && time_after(jiffies, orig_jiffies + | |
2650 | timeout)) | |
2651 | break; | |
2652 | } | |
1da177e4 | 2653 | } |
02f1175c JS |
2654 | /* Run one more char cycle */ |
2655 | msleep_interruptible(jiffies_to_msecs(char_time * 5)); | |
1da177e4 | 2656 | #ifdef CY_DEBUG_WAIT_UNTIL_SENT |
21719191 | 2657 | printk(KERN_DEBUG "Clean (jiff=%lu)...done\n", jiffies); |
1da177e4 LT |
2658 | #endif |
2659 | } | |
2660 | ||
2661 | /* | |
2662 | * This routine is called when a particular tty device is closed. | |
2663 | */ | |
02f1175c | 2664 | static void cy_close(struct tty_struct *tty, struct file *filp) |
1da177e4 | 2665 | { |
cab9bdd1 | 2666 | struct cyclades_port *info = tty->driver_data; |
9fa1b3b1 | 2667 | struct cyclades_card *card; |
02f1175c | 2668 | unsigned long flags; |
1da177e4 LT |
2669 | |
2670 | #ifdef CY_DEBUG_OTHER | |
21719191 | 2671 | printk(KERN_DEBUG "cyc:cy_close ttyC%d\n", info->line); |
1da177e4 LT |
2672 | #endif |
2673 | ||
02f1175c JS |
2674 | if (!info || serial_paranoia_check(info, tty->name, "cy_close")) { |
2675 | return; | |
2676 | } | |
1da177e4 | 2677 | |
9fa1b3b1 JS |
2678 | card = info->card; |
2679 | ||
2680 | spin_lock_irqsave(&card->card_lock, flags); | |
02f1175c JS |
2681 | /* If the TTY is being hung up, nothing to do */ |
2682 | if (tty_hung_up_p(filp)) { | |
9fa1b3b1 | 2683 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
2684 | return; |
2685 | } | |
1da177e4 | 2686 | #ifdef CY_DEBUG_OPEN |
21719191 JS |
2687 | printk(KERN_DEBUG "cyc:cy_close ttyC%d, count = %d\n", info->line, |
2688 | info->count); | |
1da177e4 | 2689 | #endif |
02f1175c JS |
2690 | if ((tty->count == 1) && (info->count != 1)) { |
2691 | /* | |
2692 | * Uh, oh. tty->count is 1, which means that the tty | |
2693 | * structure will be freed. Info->count should always | |
2694 | * be one in these conditions. If it's greater than | |
2695 | * one, we've got real problems, since it means the | |
2696 | * serial port won't be shutdown. | |
2697 | */ | |
21719191 JS |
2698 | printk(KERN_ERR "cyc:cy_close: bad serial port count; " |
2699 | "tty->count is 1, info->count is %d\n", info->count); | |
02f1175c JS |
2700 | info->count = 1; |
2701 | } | |
1da177e4 | 2702 | #ifdef CY_DEBUG_COUNT |
21719191 | 2703 | printk(KERN_DEBUG "cyc:cy_close at (%d): decrementing count to %d\n", |
02f1175c | 2704 | current->pid, info->count - 1); |
1da177e4 | 2705 | #endif |
02f1175c | 2706 | if (--info->count < 0) { |
1da177e4 | 2707 | #ifdef CY_DEBUG_COUNT |
21719191 | 2708 | printk(KERN_DEBUG "cyc:cyc_close setting count to 0\n"); |
1da177e4 | 2709 | #endif |
02f1175c | 2710 | info->count = 0; |
1da177e4 | 2711 | } |
02f1175c | 2712 | if (info->count) { |
9fa1b3b1 | 2713 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
2714 | return; |
2715 | } | |
2716 | info->flags |= ASYNC_CLOSING; | |
1da177e4 | 2717 | |
02f1175c JS |
2718 | /* |
2719 | * Now we wait for the transmit buffer to clear; and we notify | |
2720 | * the line discipline to only process XON/XOFF characters. | |
2721 | */ | |
2722 | tty->closing = 1; | |
9fa1b3b1 | 2723 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
2724 | if (info->closing_wait != CY_CLOSING_WAIT_NONE) { |
2725 | tty_wait_until_sent(tty, info->closing_wait); | |
1da177e4 | 2726 | } |
9fa1b3b1 | 2727 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c | 2728 | |
9fa1b3b1 JS |
2729 | if (!IS_CYC_Z(*card)) { |
2730 | int channel = info->line - card->first_line; | |
2731 | int index = card->bus_index; | |
2732 | void __iomem *base_addr = card->base_addr + | |
02f1175c JS |
2733 | (cy_chip_offset[channel >> 2] << index); |
2734 | /* Stop accepting input */ | |
2735 | channel &= 0x03; | |
2736 | cy_writeb(base_addr + (CyCAR << index), (u_char) channel); | |
2737 | cy_writeb(base_addr + (CySRER << index), | |
db05c3b1 | 2738 | readb(base_addr + (CySRER << index)) & ~CyRxData); |
02f1175c JS |
2739 | if (info->flags & ASYNC_INITIALIZED) { |
2740 | /* Waiting for on-board buffers to be empty before closing | |
2741 | the port */ | |
9fa1b3b1 | 2742 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c | 2743 | cy_wait_until_sent(tty, info->timeout); |
9fa1b3b1 | 2744 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
2745 | } |
2746 | } else { | |
2747 | #ifdef Z_WAKE | |
2748 | /* Waiting for on-board buffers to be empty before closing the port */ | |
9fa1b3b1 | 2749 | void __iomem *base_addr = card->base_addr; |
02f1175c JS |
2750 | struct FIRM_ID __iomem *firm_id = base_addr + ID_ADDRESS; |
2751 | struct ZFW_CTRL __iomem *zfw_ctrl = | |
db05c3b1 | 2752 | base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); |
02f1175c | 2753 | struct CH_CTRL __iomem *ch_ctrl = zfw_ctrl->ch_ctrl; |
9fa1b3b1 | 2754 | int channel = info->line - card->first_line; |
02f1175c JS |
2755 | int retval; |
2756 | ||
db05c3b1 | 2757 | if (readl(&ch_ctrl[channel].flow_status) != C_FS_TXIDLE) { |
9fa1b3b1 | 2758 | retval = cyz_issue_cmd(card, channel, C_CM_IOCTLW, 0L); |
02f1175c | 2759 | if (retval != 0) { |
21719191 JS |
2760 | printk(KERN_DEBUG "cyc:cy_close retval on " |
2761 | "ttyC%d was %x\n", info->line, retval); | |
02f1175c | 2762 | } |
9fa1b3b1 | 2763 | spin_unlock_irqrestore(&card->card_lock, flags); |
2c7fea99 | 2764 | wait_for_completion_interruptible(&info->shutdown_wait); |
9fa1b3b1 | 2765 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c | 2766 | } |
1da177e4 | 2767 | #endif |
02f1175c JS |
2768 | } |
2769 | ||
9fa1b3b1 | 2770 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
2771 | shutdown(info); |
2772 | if (tty->driver->flush_buffer) | |
2773 | tty->driver->flush_buffer(tty); | |
2774 | tty_ldisc_flush(tty); | |
9fa1b3b1 | 2775 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
2776 | |
2777 | tty->closing = 0; | |
2778 | info->event = 0; | |
2779 | info->tty = NULL; | |
2780 | if (info->blocked_open) { | |
9fa1b3b1 | 2781 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
2782 | if (info->close_delay) { |
2783 | msleep_interruptible(jiffies_to_msecs | |
2784 | (info->close_delay)); | |
2785 | } | |
2786 | wake_up_interruptible(&info->open_wait); | |
9fa1b3b1 | 2787 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
2788 | } |
2789 | info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); | |
2790 | wake_up_interruptible(&info->close_wait); | |
1da177e4 LT |
2791 | |
2792 | #ifdef CY_DEBUG_OTHER | |
21719191 | 2793 | printk(KERN_DEBUG "cyc:cy_close done\n"); |
1da177e4 LT |
2794 | #endif |
2795 | ||
9fa1b3b1 | 2796 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c | 2797 | } /* cy_close */ |
1da177e4 LT |
2798 | |
2799 | /* This routine gets called when tty_write has put something into | |
2800 | * the write_queue. The characters may come from user space or | |
2801 | * kernel space. | |
2802 | * | |
2803 | * This routine will return the number of characters actually | |
2804 | * accepted for writing. | |
2805 | * | |
2806 | * If the port is not already transmitting stuff, start it off by | |
2807 | * enabling interrupts. The interrupt service routine will then | |
2808 | * ensure that the characters are sent. | |
2809 | * If the port is already active, there is no need to kick it. | |
2810 | * | |
2811 | */ | |
02f1175c | 2812 | static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) |
1da177e4 | 2813 | { |
cab9bdd1 | 2814 | struct cyclades_port *info = tty->driver_data; |
02f1175c JS |
2815 | unsigned long flags; |
2816 | int c, ret = 0; | |
1da177e4 LT |
2817 | |
2818 | #ifdef CY_DEBUG_IO | |
21719191 | 2819 | printk(KERN_DEBUG "cyc:cy_write ttyC%d\n", info->line); |
1da177e4 LT |
2820 | #endif |
2821 | ||
02f1175c JS |
2822 | if (serial_paranoia_check(info, tty->name, "cy_write")) { |
2823 | return 0; | |
2824 | } | |
1da177e4 | 2825 | |
02f1175c JS |
2826 | if (!info->xmit_buf) |
2827 | return 0; | |
1da177e4 | 2828 | |
9fa1b3b1 | 2829 | spin_lock_irqsave(&info->card->card_lock, flags); |
02f1175c JS |
2830 | while (1) { |
2831 | c = min(count, min((int)(SERIAL_XMIT_SIZE - info->xmit_cnt - 1), | |
2832 | (int)(SERIAL_XMIT_SIZE - info->xmit_head))); | |
2833 | ||
2834 | if (c <= 0) | |
2835 | break; | |
2836 | ||
2837 | memcpy(info->xmit_buf + info->xmit_head, buf, c); | |
2838 | info->xmit_head = (info->xmit_head + c) & | |
2839 | (SERIAL_XMIT_SIZE - 1); | |
2840 | info->xmit_cnt += c; | |
2841 | buf += c; | |
2842 | count -= c; | |
2843 | ret += c; | |
2844 | } | |
9fa1b3b1 | 2845 | spin_unlock_irqrestore(&info->card->card_lock, flags); |
02f1175c JS |
2846 | |
2847 | info->idle_stats.xmit_bytes += ret; | |
2848 | info->idle_stats.xmit_idle = jiffies; | |
2849 | ||
2850 | if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) { | |
2851 | start_xmit(info); | |
2852 | } | |
2853 | return ret; | |
2854 | } /* cy_write */ | |
1da177e4 LT |
2855 | |
2856 | /* | |
2857 | * This routine is called by the kernel to write a single | |
2858 | * character to the tty device. If the kernel uses this routine, | |
2859 | * it must call the flush_chars() routine (if defined) when it is | |
2860 | * done stuffing characters into the driver. If there is no room | |
2861 | * in the queue, the character is ignored. | |
2862 | */ | |
02f1175c | 2863 | static void cy_put_char(struct tty_struct *tty, unsigned char ch) |
1da177e4 | 2864 | { |
cab9bdd1 | 2865 | struct cyclades_port *info = tty->driver_data; |
02f1175c | 2866 | unsigned long flags; |
1da177e4 LT |
2867 | |
2868 | #ifdef CY_DEBUG_IO | |
21719191 | 2869 | printk(KERN_DEBUG "cyc:cy_put_char ttyC%d\n", info->line); |
1da177e4 LT |
2870 | #endif |
2871 | ||
02f1175c JS |
2872 | if (serial_paranoia_check(info, tty->name, "cy_put_char")) |
2873 | return; | |
1da177e4 | 2874 | |
02f1175c JS |
2875 | if (!info->xmit_buf) |
2876 | return; | |
1da177e4 | 2877 | |
9fa1b3b1 | 2878 | spin_lock_irqsave(&info->card->card_lock, flags); |
90cc3018 | 2879 | if (info->xmit_cnt >= (int)(SERIAL_XMIT_SIZE - 1)) { |
9fa1b3b1 | 2880 | spin_unlock_irqrestore(&info->card->card_lock, flags); |
02f1175c JS |
2881 | return; |
2882 | } | |
1da177e4 | 2883 | |
02f1175c JS |
2884 | info->xmit_buf[info->xmit_head++] = ch; |
2885 | info->xmit_head &= SERIAL_XMIT_SIZE - 1; | |
2886 | info->xmit_cnt++; | |
1da177e4 LT |
2887 | info->idle_stats.xmit_bytes++; |
2888 | info->idle_stats.xmit_idle = jiffies; | |
9fa1b3b1 | 2889 | spin_unlock_irqrestore(&info->card->card_lock, flags); |
02f1175c | 2890 | } /* cy_put_char */ |
1da177e4 LT |
2891 | |
2892 | /* | |
2893 | * This routine is called by the kernel after it has written a | |
2894 | * series of characters to the tty device using put_char(). | |
2895 | */ | |
02f1175c | 2896 | static void cy_flush_chars(struct tty_struct *tty) |
1da177e4 | 2897 | { |
cab9bdd1 | 2898 | struct cyclades_port *info = tty->driver_data; |
02f1175c | 2899 | |
1da177e4 | 2900 | #ifdef CY_DEBUG_IO |
21719191 | 2901 | printk(KERN_DEBUG "cyc:cy_flush_chars ttyC%d\n", info->line); |
1da177e4 LT |
2902 | #endif |
2903 | ||
02f1175c JS |
2904 | if (serial_paranoia_check(info, tty->name, "cy_flush_chars")) |
2905 | return; | |
1da177e4 | 2906 | |
02f1175c JS |
2907 | if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || |
2908 | !info->xmit_buf) | |
2909 | return; | |
1da177e4 | 2910 | |
02f1175c JS |
2911 | start_xmit(info); |
2912 | } /* cy_flush_chars */ | |
1da177e4 LT |
2913 | |
2914 | /* | |
2915 | * This routine returns the numbers of characters the tty driver | |
2916 | * will accept for queuing to be written. This number is subject | |
2917 | * to change as output buffers get emptied, or if the output flow | |
2918 | * control is activated. | |
2919 | */ | |
02f1175c | 2920 | static int cy_write_room(struct tty_struct *tty) |
1da177e4 | 2921 | { |
cab9bdd1 | 2922 | struct cyclades_port *info = tty->driver_data; |
02f1175c JS |
2923 | int ret; |
2924 | ||
1da177e4 | 2925 | #ifdef CY_DEBUG_IO |
21719191 | 2926 | printk(KERN_DEBUG "cyc:cy_write_room ttyC%d\n", info->line); |
1da177e4 LT |
2927 | #endif |
2928 | ||
02f1175c JS |
2929 | if (serial_paranoia_check(info, tty->name, "cy_write_room")) |
2930 | return 0; | |
2931 | ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; | |
2932 | if (ret < 0) | |
2933 | ret = 0; | |
2934 | return ret; | |
2935 | } /* cy_write_room */ | |
1da177e4 | 2936 | |
02f1175c | 2937 | static int cy_chars_in_buffer(struct tty_struct *tty) |
1da177e4 | 2938 | { |
875b206b | 2939 | struct cyclades_card *card; |
cab9bdd1 | 2940 | struct cyclades_port *info = tty->driver_data; |
875b206b | 2941 | int channel; |
1da177e4 | 2942 | |
02f1175c JS |
2943 | if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer")) |
2944 | return 0; | |
2945 | ||
2946 | card = info->card; | |
875b206b | 2947 | channel = (info->line) - (card->first_line); |
1da177e4 LT |
2948 | |
2949 | #ifdef Z_EXT_CHARS_IN_BUFFER | |
02f1175c JS |
2950 | if (!IS_CYC_Z(cy_card[card])) { |
2951 | #endif /* Z_EXT_CHARS_IN_BUFFER */ | |
1da177e4 | 2952 | #ifdef CY_DEBUG_IO |
21719191 JS |
2953 | printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n", |
2954 | info->line, info->xmit_cnt); | |
1da177e4 | 2955 | #endif |
02f1175c | 2956 | return info->xmit_cnt; |
1da177e4 | 2957 | #ifdef Z_EXT_CHARS_IN_BUFFER |
02f1175c | 2958 | } else { |
ad39c300 JS |
2959 | static struct FIRM_ID *firm_id; |
2960 | static struct ZFW_CTRL *zfw_ctrl; | |
2961 | static struct CH_CTRL *ch_ctrl; | |
2962 | static struct BUF_CTRL *buf_ctrl; | |
02f1175c | 2963 | int char_count; |
ad39c300 | 2964 | __u32 tx_put, tx_get, tx_bufsize; |
02f1175c | 2965 | |
875b206b JS |
2966 | firm_id = card->base_addr + ID_ADDRESS; |
2967 | zfw_ctrl = card->base_addr + | |
db05c3b1 | 2968 | (readl(&firm_id->zfwctrl_addr) & 0xfffff); |
02f1175c JS |
2969 | ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]); |
2970 | buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]); | |
2971 | ||
db05c3b1 JS |
2972 | tx_get = readl(&buf_ctrl->tx_get); |
2973 | tx_put = readl(&buf_ctrl->tx_put); | |
2974 | tx_bufsize = readl(&buf_ctrl->tx_bufsize); | |
02f1175c JS |
2975 | if (tx_put >= tx_get) |
2976 | char_count = tx_put - tx_get; | |
2977 | else | |
2978 | char_count = tx_put - tx_get + tx_bufsize; | |
1da177e4 | 2979 | #ifdef CY_DEBUG_IO |
21719191 JS |
2980 | printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n", |
2981 | info->line, info->xmit_cnt + char_count); | |
1da177e4 | 2982 | #endif |
096dcfce | 2983 | return info->xmit_cnt + char_count; |
02f1175c JS |
2984 | } |
2985 | #endif /* Z_EXT_CHARS_IN_BUFFER */ | |
2986 | } /* cy_chars_in_buffer */ | |
1da177e4 LT |
2987 | |
2988 | /* | |
2989 | * ------------------------------------------------------------ | |
2990 | * cy_ioctl() and friends | |
2991 | * ------------------------------------------------------------ | |
2992 | */ | |
2993 | ||
1a86b5e3 | 2994 | static void cyy_baud_calc(struct cyclades_port *info, __u32 baud) |
1da177e4 | 2995 | { |
02f1175c | 2996 | int co, co_val, bpr; |
1a86b5e3 | 2997 | __u32 cy_clock = ((info->chip_rev >= CD1400_REV_J) ? 60000000 : |
02f1175c | 2998 | 25000000); |
1da177e4 | 2999 | |
02f1175c JS |
3000 | if (baud == 0) { |
3001 | info->tbpr = info->tco = info->rbpr = info->rco = 0; | |
3002 | return; | |
3003 | } | |
1da177e4 | 3004 | |
02f1175c JS |
3005 | /* determine which prescaler to use */ |
3006 | for (co = 4, co_val = 2048; co; co--, co_val >>= 2) { | |
3007 | if (cy_clock / co_val / baud > 63) | |
3008 | break; | |
3009 | } | |
1da177e4 | 3010 | |
02f1175c JS |
3011 | bpr = (cy_clock / co_val * 2 / baud + 1) / 2; |
3012 | if (bpr > 255) | |
3013 | bpr = 255; | |
1da177e4 | 3014 | |
02f1175c JS |
3015 | info->tbpr = info->rbpr = bpr; |
3016 | info->tco = info->rco = co; | |
1da177e4 LT |
3017 | } |
3018 | ||
3019 | /* | |
3020 | * This routine finds or computes the various line characteristics. | |
3021 | * It used to be called config_setup | |
3022 | */ | |
02f1175c | 3023 | static void set_line_char(struct cyclades_port *info) |
1da177e4 | 3024 | { |
875b206b | 3025 | struct cyclades_card *card; |
02f1175c JS |
3026 | unsigned long flags; |
3027 | void __iomem *base_addr; | |
875b206b | 3028 | int chip, channel, index; |
02f1175c JS |
3029 | unsigned cflag, iflag; |
3030 | unsigned short chip_number; | |
3031 | int baud, baud_rate = 0; | |
3032 | int i; | |
3033 | ||
3034 | if (!info->tty || !info->tty->termios) { | |
3035 | return; | |
1da177e4 | 3036 | } |
02f1175c JS |
3037 | if (info->line == -1) { |
3038 | return; | |
1da177e4 | 3039 | } |
02f1175c JS |
3040 | cflag = info->tty->termios->c_cflag; |
3041 | iflag = info->tty->termios->c_iflag; | |
1da177e4 | 3042 | |
02f1175c JS |
3043 | /* |
3044 | * Set up the tty->alt_speed kludge | |
3045 | */ | |
3046 | if (info->tty) { | |
3047 | if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) | |
3048 | info->tty->alt_speed = 57600; | |
3049 | if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) | |
3050 | info->tty->alt_speed = 115200; | |
3051 | if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) | |
3052 | info->tty->alt_speed = 230400; | |
3053 | if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) | |
3054 | info->tty->alt_speed = 460800; | |
1da177e4 | 3055 | } |
02f1175c JS |
3056 | |
3057 | card = info->card; | |
875b206b | 3058 | channel = info->line - card->first_line; |
02f1175c JS |
3059 | chip_number = channel / 4; |
3060 | ||
875b206b | 3061 | if (!IS_CYC_Z(*card)) { |
02f1175c | 3062 | |
875b206b | 3063 | index = card->bus_index; |
02f1175c JS |
3064 | |
3065 | /* baud rate */ | |
3066 | baud = tty_get_baud_rate(info->tty); | |
3067 | if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) == | |
3068 | ASYNC_SPD_CUST) { | |
3069 | if (info->custom_divisor) | |
3070 | baud_rate = info->baud / info->custom_divisor; | |
3071 | else | |
3072 | baud_rate = info->baud; | |
3073 | } else if (baud > CD1400_MAX_SPEED) { | |
3074 | baud = CD1400_MAX_SPEED; | |
3075 | } | |
3076 | /* find the baud index */ | |
3077 | for (i = 0; i < 20; i++) { | |
3078 | if (baud == baud_table[i]) { | |
3079 | break; | |
3080 | } | |
3081 | } | |
3082 | if (i == 20) { | |
3083 | i = 19; /* CD1400_MAX_SPEED */ | |
3084 | } | |
3085 | ||
3086 | if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) == | |
3087 | ASYNC_SPD_CUST) { | |
3088 | cyy_baud_calc(info, baud_rate); | |
3089 | } else { | |
3090 | if (info->chip_rev >= CD1400_REV_J) { | |
3091 | /* It is a CD1400 rev. J or later */ | |
3092 | info->tbpr = baud_bpr_60[i]; /* Tx BPR */ | |
3093 | info->tco = baud_co_60[i]; /* Tx CO */ | |
3094 | info->rbpr = baud_bpr_60[i]; /* Rx BPR */ | |
3095 | info->rco = baud_co_60[i]; /* Rx CO */ | |
3096 | } else { | |
3097 | info->tbpr = baud_bpr_25[i]; /* Tx BPR */ | |
3098 | info->tco = baud_co_25[i]; /* Tx CO */ | |
3099 | info->rbpr = baud_bpr_25[i]; /* Rx BPR */ | |
3100 | info->rco = baud_co_25[i]; /* Rx CO */ | |
3101 | } | |
3102 | } | |
3103 | if (baud_table[i] == 134) { | |
3104 | /* get it right for 134.5 baud */ | |
3105 | info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) + | |
3106 | 2; | |
3107 | } else if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) == | |
3108 | ASYNC_SPD_CUST) { | |
3109 | info->timeout = (info->xmit_fifo_size * HZ * 15 / | |
3110 | baud_rate) + 2; | |
3111 | } else if (baud_table[i]) { | |
3112 | info->timeout = (info->xmit_fifo_size * HZ * 15 / | |
3113 | baud_table[i]) + 2; | |
3114 | /* this needs to be propagated into the card info */ | |
3115 | } else { | |
3116 | info->timeout = 0; | |
3117 | } | |
3118 | /* By tradition (is it a standard?) a baud rate of zero | |
3119 | implies the line should be/has been closed. A bit | |
3120 | later in this routine such a test is performed. */ | |
3121 | ||
3122 | /* byte size and parity */ | |
3123 | info->cor5 = 0; | |
3124 | info->cor4 = 0; | |
3125 | /* receive threshold */ | |
3126 | info->cor3 = (info->default_threshold ? | |
3127 | info->default_threshold : baud_cor3[i]); | |
3128 | info->cor2 = CyETC; | |
3129 | switch (cflag & CSIZE) { | |
3130 | case CS5: | |
3131 | info->cor1 = Cy_5_BITS; | |
3132 | break; | |
3133 | case CS6: | |
3134 | info->cor1 = Cy_6_BITS; | |
3135 | break; | |
3136 | case CS7: | |
3137 | info->cor1 = Cy_7_BITS; | |
3138 | break; | |
3139 | case CS8: | |
3140 | info->cor1 = Cy_8_BITS; | |
3141 | break; | |
3142 | } | |
3143 | if (cflag & CSTOPB) { | |
3144 | info->cor1 |= Cy_2_STOP; | |
3145 | } | |
3146 | if (cflag & PARENB) { | |
3147 | if (cflag & PARODD) { | |
3148 | info->cor1 |= CyPARITY_O; | |
3149 | } else { | |
3150 | info->cor1 |= CyPARITY_E; | |
3151 | } | |
3152 | } else { | |
3153 | info->cor1 |= CyPARITY_NONE; | |
3154 | } | |
3155 | ||
3156 | /* CTS flow control flag */ | |
3157 | if (cflag & CRTSCTS) { | |
3158 | info->flags |= ASYNC_CTS_FLOW; | |
3159 | info->cor2 |= CyCtsAE; | |
3160 | } else { | |
3161 | info->flags &= ~ASYNC_CTS_FLOW; | |
3162 | info->cor2 &= ~CyCtsAE; | |
3163 | } | |
3164 | if (cflag & CLOCAL) | |
3165 | info->flags &= ~ASYNC_CHECK_CD; | |
3166 | else | |
3167 | info->flags |= ASYNC_CHECK_CD; | |
1da177e4 LT |
3168 | |
3169 | /*********************************************** | |
3170 | The hardware option, CyRtsAO, presents RTS when | |
3171 | the chip has characters to send. Since most modems | |
3172 | use RTS as reverse (inbound) flow control, this | |
3173 | option is not used. If inbound flow control is | |
3174 | necessary, DTR can be programmed to provide the | |
3175 | appropriate signals for use with a non-standard | |
3176 | cable. Contact Marcio Saito for details. | |
3177 | ***********************************************/ | |
3178 | ||
02f1175c JS |
3179 | chip = channel >> 2; |
3180 | channel &= 0x03; | |
875b206b | 3181 | base_addr = card->base_addr + (cy_chip_offset[chip] << index); |
1da177e4 | 3182 | |
9fa1b3b1 | 3183 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
3184 | cy_writeb(base_addr + (CyCAR << index), (u_char) channel); |
3185 | ||
3186 | /* tx and rx baud rate */ | |
3187 | ||
3188 | cy_writeb(base_addr + (CyTCOR << index), info->tco); | |
3189 | cy_writeb(base_addr + (CyTBPR << index), info->tbpr); | |
3190 | cy_writeb(base_addr + (CyRCOR << index), info->rco); | |
3191 | cy_writeb(base_addr + (CyRBPR << index), info->rbpr); | |
3192 | ||
3193 | /* set line characteristics according configuration */ | |
3194 | ||
3195 | cy_writeb(base_addr + (CySCHR1 << index), | |
3196 | START_CHAR(info->tty)); | |
3197 | cy_writeb(base_addr + (CySCHR2 << index), STOP_CHAR(info->tty)); | |
3198 | cy_writeb(base_addr + (CyCOR1 << index), info->cor1); | |
3199 | cy_writeb(base_addr + (CyCOR2 << index), info->cor2); | |
3200 | cy_writeb(base_addr + (CyCOR3 << index), info->cor3); | |
3201 | cy_writeb(base_addr + (CyCOR4 << index), info->cor4); | |
3202 | cy_writeb(base_addr + (CyCOR5 << index), info->cor5); | |
3203 | ||
3204 | cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR1ch | CyCOR2ch | | |
3205 | CyCOR3ch, index); | |
3206 | ||
3207 | cy_writeb(base_addr + (CyCAR << index), (u_char) channel); /* !!! Is this needed? */ | |
3208 | cy_writeb(base_addr + (CyRTPR << index), | |
3209 | (info->default_timeout ? info->default_timeout : 0x02)); | |
3210 | /* 10ms rx timeout */ | |
3211 | ||
3212 | if (C_CLOCAL(info->tty)) { | |
3213 | /* without modem intr */ | |
3214 | cy_writeb(base_addr + (CySRER << index), | |
db05c3b1 | 3215 | readb(base_addr + (CySRER << index)) | CyMdmCh); |
02f1175c JS |
3216 | /* act on 1->0 modem transitions */ |
3217 | if ((cflag & CRTSCTS) && info->rflow) { | |
3218 | cy_writeb(base_addr + (CyMCOR1 << index), | |
3219 | (CyCTS | rflow_thr[i])); | |
3220 | } else { | |
3221 | cy_writeb(base_addr + (CyMCOR1 << index), | |
3222 | CyCTS); | |
3223 | } | |
3224 | /* act on 0->1 modem transitions */ | |
3225 | cy_writeb(base_addr + (CyMCOR2 << index), CyCTS); | |
1da177e4 | 3226 | } else { |
02f1175c JS |
3227 | /* without modem intr */ |
3228 | cy_writeb(base_addr + (CySRER << index), | |
db05c3b1 | 3229 | readb(base_addr + |
02f1175c JS |
3230 | (CySRER << index)) | CyMdmCh); |
3231 | /* act on 1->0 modem transitions */ | |
3232 | if ((cflag & CRTSCTS) && info->rflow) { | |
3233 | cy_writeb(base_addr + (CyMCOR1 << index), | |
3234 | (CyDSR | CyCTS | CyRI | CyDCD | | |
3235 | rflow_thr[i])); | |
3236 | } else { | |
3237 | cy_writeb(base_addr + (CyMCOR1 << index), | |
3238 | CyDSR | CyCTS | CyRI | CyDCD); | |
3239 | } | |
3240 | /* act on 0->1 modem transitions */ | |
3241 | cy_writeb(base_addr + (CyMCOR2 << index), | |
3242 | CyDSR | CyCTS | CyRI | CyDCD); | |
1da177e4 | 3243 | } |
02f1175c JS |
3244 | |
3245 | if (i == 0) { /* baud rate is zero, turn off line */ | |
3246 | if (info->rtsdtr_inv) { | |
3247 | cy_writeb(base_addr + (CyMSVR1 << index), | |
3248 | ~CyRTS); | |
3249 | } else { | |
3250 | cy_writeb(base_addr + (CyMSVR2 << index), | |
3251 | ~CyDTR); | |
3252 | } | |
1da177e4 | 3253 | #ifdef CY_DEBUG_DTR |
21719191 JS |
3254 | printk(KERN_DEBUG "cyc:set_line_char dropping DTR\n"); |
3255 | printk(KERN_DEBUG " status: 0x%x, 0x%x\n", | |
db05c3b1 JS |
3256 | readb(base_addr + (CyMSVR1 << index)), |
3257 | readb(base_addr + (CyMSVR2 << index))); | |
1da177e4 | 3258 | #endif |
02f1175c JS |
3259 | } else { |
3260 | if (info->rtsdtr_inv) { | |
3261 | cy_writeb(base_addr + (CyMSVR1 << index), | |
3262 | CyRTS); | |
3263 | } else { | |
3264 | cy_writeb(base_addr + (CyMSVR2 << index), | |
3265 | CyDTR); | |
3266 | } | |
1da177e4 | 3267 | #ifdef CY_DEBUG_DTR |
21719191 JS |
3268 | printk(KERN_DEBUG "cyc:set_line_char raising DTR\n"); |
3269 | printk(KERN_DEBUG " status: 0x%x, 0x%x\n", | |
db05c3b1 JS |
3270 | readb(base_addr + (CyMSVR1 << index)), |
3271 | readb(base_addr + (CyMSVR2 << index))); | |
1da177e4 | 3272 | #endif |
02f1175c | 3273 | } |
1da177e4 | 3274 | |
02f1175c JS |
3275 | if (info->tty) { |
3276 | clear_bit(TTY_IO_ERROR, &info->tty->flags); | |
3277 | } | |
9fa1b3b1 | 3278 | spin_unlock_irqrestore(&card->card_lock, flags); |
1da177e4 | 3279 | |
1da177e4 | 3280 | } else { |
02f1175c JS |
3281 | struct FIRM_ID __iomem *firm_id; |
3282 | struct ZFW_CTRL __iomem *zfw_ctrl; | |
3283 | struct BOARD_CTRL __iomem *board_ctrl; | |
3284 | struct CH_CTRL __iomem *ch_ctrl; | |
3285 | struct BUF_CTRL __iomem *buf_ctrl; | |
1a86b5e3 | 3286 | __u32 sw_flow; |
02f1175c | 3287 | int retval; |
1da177e4 | 3288 | |
875b206b JS |
3289 | firm_id = card->base_addr + ID_ADDRESS; |
3290 | if (!ISZLOADED(*card)) { | |
02f1175c JS |
3291 | return; |
3292 | } | |
1da177e4 | 3293 | |
875b206b | 3294 | zfw_ctrl = card->base_addr + |
db05c3b1 | 3295 | (readl(&firm_id->zfwctrl_addr) & 0xfffff); |
02f1175c JS |
3296 | board_ctrl = &zfw_ctrl->board_ctrl; |
3297 | ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]); | |
3298 | buf_ctrl = &zfw_ctrl->buf_ctrl[channel]; | |
3299 | ||
3300 | /* baud rate */ | |
3301 | baud = tty_get_baud_rate(info->tty); | |
3302 | if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) == | |
3303 | ASYNC_SPD_CUST) { | |
3304 | if (info->custom_divisor) | |
3305 | baud_rate = info->baud / info->custom_divisor; | |
3306 | else | |
3307 | baud_rate = info->baud; | |
3308 | } else if (baud > CYZ_MAX_SPEED) { | |
3309 | baud = CYZ_MAX_SPEED; | |
3310 | } | |
3311 | cy_writel(&ch_ctrl->comm_baud, baud); | |
3312 | ||
3313 | if (baud == 134) { | |
3314 | /* get it right for 134.5 baud */ | |
3315 | info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) + | |
3316 | 2; | |
3317 | } else if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) == | |
3318 | ASYNC_SPD_CUST) { | |
3319 | info->timeout = (info->xmit_fifo_size * HZ * 15 / | |
3320 | baud_rate) + 2; | |
3321 | } else if (baud) { | |
3322 | info->timeout = (info->xmit_fifo_size * HZ * 15 / | |
3323 | baud) + 2; | |
3324 | /* this needs to be propagated into the card info */ | |
3325 | } else { | |
3326 | info->timeout = 0; | |
3327 | } | |
1da177e4 | 3328 | |
02f1175c JS |
3329 | /* byte size and parity */ |
3330 | switch (cflag & CSIZE) { | |
3331 | case CS5: | |
3332 | cy_writel(&ch_ctrl->comm_data_l, C_DL_CS5); | |
3333 | break; | |
3334 | case CS6: | |
3335 | cy_writel(&ch_ctrl->comm_data_l, C_DL_CS6); | |
3336 | break; | |
3337 | case CS7: | |
3338 | cy_writel(&ch_ctrl->comm_data_l, C_DL_CS7); | |
3339 | break; | |
3340 | case CS8: | |
3341 | cy_writel(&ch_ctrl->comm_data_l, C_DL_CS8); | |
3342 | break; | |
3343 | } | |
3344 | if (cflag & CSTOPB) { | |
3345 | cy_writel(&ch_ctrl->comm_data_l, | |
db05c3b1 | 3346 | readl(&ch_ctrl->comm_data_l) | C_DL_2STOP); |
02f1175c JS |
3347 | } else { |
3348 | cy_writel(&ch_ctrl->comm_data_l, | |
db05c3b1 | 3349 | readl(&ch_ctrl->comm_data_l) | C_DL_1STOP); |
02f1175c JS |
3350 | } |
3351 | if (cflag & PARENB) { | |
3352 | if (cflag & PARODD) { | |
3353 | cy_writel(&ch_ctrl->comm_parity, C_PR_ODD); | |
3354 | } else { | |
3355 | cy_writel(&ch_ctrl->comm_parity, C_PR_EVEN); | |
3356 | } | |
3357 | } else { | |
3358 | cy_writel(&ch_ctrl->comm_parity, C_PR_NONE); | |
3359 | } | |
1da177e4 | 3360 | |
02f1175c JS |
3361 | /* CTS flow control flag */ |
3362 | if (cflag & CRTSCTS) { | |
3363 | cy_writel(&ch_ctrl->hw_flow, | |
db05c3b1 | 3364 | readl(&ch_ctrl->hw_flow) | C_RS_CTS | C_RS_RTS); |
02f1175c | 3365 | } else { |
db05c3b1 JS |
3366 | cy_writel(&ch_ctrl->hw_flow, readl(&ch_ctrl->hw_flow) & |
3367 | ~(C_RS_CTS | C_RS_RTS)); | |
02f1175c JS |
3368 | } |
3369 | /* As the HW flow control is done in firmware, the driver | |
3370 | doesn't need to care about it */ | |
3371 | info->flags &= ~ASYNC_CTS_FLOW; | |
3372 | ||
3373 | /* XON/XOFF/XANY flow control flags */ | |
3374 | sw_flow = 0; | |
3375 | if (iflag & IXON) { | |
3376 | sw_flow |= C_FL_OXX; | |
3377 | if (iflag & IXANY) | |
3378 | sw_flow |= C_FL_OIXANY; | |
3379 | } | |
3380 | cy_writel(&ch_ctrl->sw_flow, sw_flow); | |
3381 | ||
875b206b | 3382 | retval = cyz_issue_cmd(card, channel, C_CM_IOCTL, 0L); |
02f1175c | 3383 | if (retval != 0) { |
21719191 JS |
3384 | printk(KERN_ERR "cyc:set_line_char retval on ttyC%d " |
3385 | "was %x\n", info->line, retval); | |
02f1175c JS |
3386 | } |
3387 | ||
3388 | /* CD sensitivity */ | |
3389 | if (cflag & CLOCAL) { | |
3390 | info->flags &= ~ASYNC_CHECK_CD; | |
3391 | } else { | |
3392 | info->flags |= ASYNC_CHECK_CD; | |
3393 | } | |
1da177e4 | 3394 | |
02f1175c JS |
3395 | if (baud == 0) { /* baud rate is zero, turn off line */ |
3396 | cy_writel(&ch_ctrl->rs_control, | |
db05c3b1 | 3397 | readl(&ch_ctrl->rs_control) & ~C_RS_DTR); |
1da177e4 | 3398 | #ifdef CY_DEBUG_DTR |
21719191 | 3399 | printk(KERN_DEBUG "cyc:set_line_char dropping Z DTR\n"); |
1da177e4 | 3400 | #endif |
02f1175c JS |
3401 | } else { |
3402 | cy_writel(&ch_ctrl->rs_control, | |
db05c3b1 | 3403 | readl(&ch_ctrl->rs_control) | C_RS_DTR); |
1da177e4 | 3404 | #ifdef CY_DEBUG_DTR |
21719191 | 3405 | printk(KERN_DEBUG "cyc:set_line_char raising Z DTR\n"); |
1da177e4 | 3406 | #endif |
02f1175c | 3407 | } |
1da177e4 | 3408 | |
875b206b | 3409 | retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM,0L); |
02f1175c | 3410 | if (retval != 0) { |
21719191 JS |
3411 | printk(KERN_ERR "cyc:set_line_char(2) retval on ttyC%d " |
3412 | "was %x\n", info->line, retval); | |
02f1175c | 3413 | } |
1da177e4 | 3414 | |
02f1175c JS |
3415 | if (info->tty) { |
3416 | clear_bit(TTY_IO_ERROR, &info->tty->flags); | |
3417 | } | |
1da177e4 | 3418 | } |
02f1175c | 3419 | } /* set_line_char */ |
1da177e4 LT |
3420 | |
3421 | static int | |
02f1175c JS |
3422 | get_serial_info(struct cyclades_port *info, |
3423 | struct serial_struct __user * retinfo) | |
1da177e4 | 3424 | { |
02f1175c | 3425 | struct serial_struct tmp; |
875b206b | 3426 | struct cyclades_card *cinfo = info->card; |
1da177e4 | 3427 | |
02f1175c JS |
3428 | if (!retinfo) |
3429 | return -EFAULT; | |
3430 | memset(&tmp, 0, sizeof(tmp)); | |
3431 | tmp.type = info->type; | |
3432 | tmp.line = info->line; | |
875b206b JS |
3433 | tmp.port = (info->card - cy_card) * 0x100 + info->line - |
3434 | cinfo->first_line; | |
02f1175c JS |
3435 | tmp.irq = cinfo->irq; |
3436 | tmp.flags = info->flags; | |
3437 | tmp.close_delay = info->close_delay; | |
d5dedf99 | 3438 | tmp.closing_wait = info->closing_wait; |
02f1175c JS |
3439 | tmp.baud_base = info->baud; |
3440 | tmp.custom_divisor = info->custom_divisor; | |
3441 | tmp.hub6 = 0; /*!!! */ | |
3442 | return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0; | |
3443 | } /* get_serial_info */ | |
1da177e4 LT |
3444 | |
3445 | static int | |
02f1175c JS |
3446 | set_serial_info(struct cyclades_port *info, |
3447 | struct serial_struct __user * new_info) | |
1da177e4 | 3448 | { |
02f1175c JS |
3449 | struct serial_struct new_serial; |
3450 | struct cyclades_port old_info; | |
3451 | ||
3452 | if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) | |
3453 | return -EFAULT; | |
3454 | old_info = *info; | |
3455 | ||
3456 | if (!capable(CAP_SYS_ADMIN)) { | |
3457 | if (new_serial.close_delay != info->close_delay || | |
3458 | new_serial.baud_base != info->baud || | |
3459 | (new_serial.flags & ASYNC_FLAGS & | |
3460 | ~ASYNC_USR_MASK) != | |
3461 | (info->flags & ASYNC_FLAGS & ~ASYNC_USR_MASK)) | |
3462 | return -EPERM; | |
3463 | info->flags = (info->flags & ~ASYNC_USR_MASK) | | |
3464 | (new_serial.flags & ASYNC_USR_MASK); | |
3465 | info->baud = new_serial.baud_base; | |
3466 | info->custom_divisor = new_serial.custom_divisor; | |
3467 | goto check_and_exit; | |
3468 | } | |
3469 | ||
3470 | /* | |
3471 | * OK, past this point, all the error checking has been done. | |
3472 | * At this point, we start making changes..... | |
3473 | */ | |
3474 | ||
3475 | info->baud = new_serial.baud_base; | |
3476 | info->custom_divisor = new_serial.custom_divisor; | |
3477 | info->flags = (info->flags & ~ASYNC_FLAGS) | | |
3478 | (new_serial.flags & ASYNC_FLAGS); | |
3479 | info->close_delay = new_serial.close_delay * HZ / 100; | |
3480 | info->closing_wait = new_serial.closing_wait * HZ / 100; | |
1da177e4 LT |
3481 | |
3482 | check_and_exit: | |
02f1175c JS |
3483 | if (info->flags & ASYNC_INITIALIZED) { |
3484 | set_line_char(info); | |
3485 | return 0; | |
3486 | } else { | |
3487 | return startup(info); | |
3488 | } | |
3489 | } /* set_serial_info */ | |
1da177e4 LT |
3490 | |
3491 | /* | |
3492 | * get_lsr_info - get line status register info | |
3493 | * | |
3494 | * Purpose: Let user call ioctl() to get info when the UART physically | |
3495 | * is emptied. On bus types like RS485, the transmitter must | |
3496 | * release the bus after transmitting. This must be done when | |
3497 | * the transmit shift register is empty, not be done when the | |
3498 | * transmit holding register is empty. This functionality | |
3499 | * allows an RS485 driver to be written in user space. | |
3500 | */ | |
02f1175c | 3501 | static int get_lsr_info(struct cyclades_port *info, unsigned int __user * value) |
1da177e4 | 3502 | { |
875b206b JS |
3503 | struct cyclades_card *card; |
3504 | int chip, channel, index; | |
02f1175c JS |
3505 | unsigned char status; |
3506 | unsigned int result; | |
3507 | unsigned long flags; | |
3508 | void __iomem *base_addr; | |
1da177e4 | 3509 | |
02f1175c | 3510 | card = info->card; |
875b206b JS |
3511 | channel = (info->line) - (card->first_line); |
3512 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
3513 | chip = channel >> 2; |
3514 | channel &= 0x03; | |
875b206b JS |
3515 | index = card->bus_index; |
3516 | base_addr = card->base_addr + (cy_chip_offset[chip] << index); | |
02f1175c | 3517 | |
9fa1b3b1 | 3518 | spin_lock_irqsave(&card->card_lock, flags); |
db05c3b1 | 3519 | status = readb(base_addr + (CySRER << index)) & |
02f1175c | 3520 | (CyTxRdy | CyTxMpty); |
9fa1b3b1 | 3521 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3522 | result = (status ? 0 : TIOCSER_TEMT); |
3523 | } else { | |
3524 | /* Not supported yet */ | |
3525 | return -EINVAL; | |
3526 | } | |
3527 | return put_user(result, (unsigned long __user *)value); | |
1da177e4 LT |
3528 | } |
3529 | ||
02f1175c | 3530 | static int cy_tiocmget(struct tty_struct *tty, struct file *file) |
1da177e4 | 3531 | { |
cab9bdd1 | 3532 | struct cyclades_port *info = tty->driver_data; |
875b206b JS |
3533 | struct cyclades_card *card; |
3534 | int chip, channel, index; | |
02f1175c JS |
3535 | void __iomem *base_addr; |
3536 | unsigned long flags; | |
3537 | unsigned char status; | |
3538 | unsigned long lstatus; | |
3539 | unsigned int result; | |
3540 | struct FIRM_ID __iomem *firm_id; | |
3541 | struct ZFW_CTRL __iomem *zfw_ctrl; | |
3542 | struct BOARD_CTRL __iomem *board_ctrl; | |
3543 | struct CH_CTRL __iomem *ch_ctrl; | |
3544 | ||
3545 | if (serial_paranoia_check(info, tty->name, __FUNCTION__)) | |
3546 | return -ENODEV; | |
1da177e4 | 3547 | |
02f1175c | 3548 | card = info->card; |
875b206b JS |
3549 | channel = info->line - card->first_line; |
3550 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
3551 | chip = channel >> 2; |
3552 | channel &= 0x03; | |
875b206b JS |
3553 | index = card->bus_index; |
3554 | base_addr = card->base_addr + (cy_chip_offset[chip] << index); | |
1da177e4 | 3555 | |
9fa1b3b1 | 3556 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c | 3557 | cy_writeb(base_addr + (CyCAR << index), (u_char) channel); |
db05c3b1 JS |
3558 | status = readb(base_addr + (CyMSVR1 << index)); |
3559 | status |= readb(base_addr + (CyMSVR2 << index)); | |
9fa1b3b1 | 3560 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3561 | |
3562 | if (info->rtsdtr_inv) { | |
3563 | result = ((status & CyRTS) ? TIOCM_DTR : 0) | | |
3564 | ((status & CyDTR) ? TIOCM_RTS : 0); | |
3565 | } else { | |
3566 | result = ((status & CyRTS) ? TIOCM_RTS : 0) | | |
3567 | ((status & CyDTR) ? TIOCM_DTR : 0); | |
3568 | } | |
3569 | result |= ((status & CyDCD) ? TIOCM_CAR : 0) | | |
3570 | ((status & CyRI) ? TIOCM_RNG : 0) | | |
3571 | ((status & CyDSR) ? TIOCM_DSR : 0) | | |
3572 | ((status & CyCTS) ? TIOCM_CTS : 0); | |
1da177e4 | 3573 | } else { |
875b206b JS |
3574 | base_addr = card->base_addr; |
3575 | firm_id = card->base_addr + ID_ADDRESS; | |
3576 | if (ISZLOADED(*card)) { | |
3577 | zfw_ctrl = card->base_addr + | |
db05c3b1 | 3578 | (readl(&firm_id->zfwctrl_addr) & 0xfffff); |
02f1175c JS |
3579 | board_ctrl = &zfw_ctrl->board_ctrl; |
3580 | ch_ctrl = zfw_ctrl->ch_ctrl; | |
db05c3b1 | 3581 | lstatus = readl(&ch_ctrl[channel].rs_status); |
02f1175c JS |
3582 | result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) | |
3583 | ((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) | | |
3584 | ((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) | | |
3585 | ((lstatus & C_RS_RI) ? TIOCM_RNG : 0) | | |
3586 | ((lstatus & C_RS_DSR) ? TIOCM_DSR : 0) | | |
3587 | ((lstatus & C_RS_CTS) ? TIOCM_CTS : 0); | |
3588 | } else { | |
3589 | result = 0; | |
3590 | return -ENODEV; | |
3591 | } | |
1da177e4 | 3592 | |
02f1175c JS |
3593 | } |
3594 | return result; | |
3595 | } /* cy_tiomget */ | |
1da177e4 LT |
3596 | |
3597 | static int | |
3598 | cy_tiocmset(struct tty_struct *tty, struct file *file, | |
02f1175c | 3599 | unsigned int set, unsigned int clear) |
1da177e4 | 3600 | { |
cab9bdd1 | 3601 | struct cyclades_port *info = tty->driver_data; |
875b206b JS |
3602 | struct cyclades_card *card; |
3603 | int chip, channel, index; | |
02f1175c JS |
3604 | void __iomem *base_addr; |
3605 | unsigned long flags; | |
3606 | struct FIRM_ID __iomem *firm_id; | |
3607 | struct ZFW_CTRL __iomem *zfw_ctrl; | |
3608 | struct BOARD_CTRL __iomem *board_ctrl; | |
3609 | struct CH_CTRL __iomem *ch_ctrl; | |
3610 | int retval; | |
3611 | ||
3612 | if (serial_paranoia_check(info, tty->name, __FUNCTION__)) | |
3613 | return -ENODEV; | |
3614 | ||
3615 | card = info->card; | |
875b206b JS |
3616 | channel = (info->line) - (card->first_line); |
3617 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
3618 | chip = channel >> 2; |
3619 | channel &= 0x03; | |
875b206b JS |
3620 | index = card->bus_index; |
3621 | base_addr = card->base_addr + (cy_chip_offset[chip] << index); | |
02f1175c JS |
3622 | |
3623 | if (set & TIOCM_RTS) { | |
9fa1b3b1 | 3624 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
3625 | cy_writeb(base_addr + (CyCAR << index), |
3626 | (u_char) channel); | |
3627 | if (info->rtsdtr_inv) { | |
3628 | cy_writeb(base_addr + (CyMSVR2 << index), | |
3629 | CyDTR); | |
3630 | } else { | |
3631 | cy_writeb(base_addr + (CyMSVR1 << index), | |
3632 | CyRTS); | |
3633 | } | |
9fa1b3b1 | 3634 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3635 | } |
3636 | if (clear & TIOCM_RTS) { | |
9fa1b3b1 | 3637 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
3638 | cy_writeb(base_addr + (CyCAR << index), |
3639 | (u_char) channel); | |
3640 | if (info->rtsdtr_inv) { | |
3641 | cy_writeb(base_addr + (CyMSVR2 << index), | |
3642 | ~CyDTR); | |
3643 | } else { | |
3644 | cy_writeb(base_addr + (CyMSVR1 << index), | |
3645 | ~CyRTS); | |
3646 | } | |
9fa1b3b1 | 3647 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3648 | } |
3649 | if (set & TIOCM_DTR) { | |
9fa1b3b1 | 3650 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
3651 | cy_writeb(base_addr + (CyCAR << index), |
3652 | (u_char) channel); | |
3653 | if (info->rtsdtr_inv) { | |
3654 | cy_writeb(base_addr + (CyMSVR1 << index), | |
3655 | CyRTS); | |
3656 | } else { | |
3657 | cy_writeb(base_addr + (CyMSVR2 << index), | |
3658 | CyDTR); | |
3659 | } | |
1da177e4 | 3660 | #ifdef CY_DEBUG_DTR |
21719191 JS |
3661 | printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n"); |
3662 | printk(KERN_DEBUG " status: 0x%x, 0x%x\n", | |
db05c3b1 JS |
3663 | readb(base_addr + (CyMSVR1 << index)), |
3664 | readb(base_addr + (CyMSVR2 << index))); | |
1da177e4 | 3665 | #endif |
9fa1b3b1 | 3666 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3667 | } |
3668 | if (clear & TIOCM_DTR) { | |
9fa1b3b1 | 3669 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
3670 | cy_writeb(base_addr + (CyCAR << index), |
3671 | (u_char) channel); | |
3672 | if (info->rtsdtr_inv) { | |
3673 | cy_writeb(base_addr + (CyMSVR1 << index), | |
3674 | ~CyRTS); | |
3675 | } else { | |
3676 | cy_writeb(base_addr + (CyMSVR2 << index), | |
3677 | ~CyDTR); | |
3678 | } | |
1da177e4 LT |
3679 | |
3680 | #ifdef CY_DEBUG_DTR | |
21719191 JS |
3681 | printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n"); |
3682 | printk(KERN_DEBUG " status: 0x%x, 0x%x\n", | |
db05c3b1 JS |
3683 | readb(base_addr + (CyMSVR1 << index)), |
3684 | readb(base_addr + (CyMSVR2 << index))); | |
1da177e4 | 3685 | #endif |
9fa1b3b1 | 3686 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3687 | } |
3688 | } else { | |
875b206b | 3689 | base_addr = card->base_addr; |
02f1175c | 3690 | |
875b206b JS |
3691 | firm_id = card->base_addr + ID_ADDRESS; |
3692 | if (ISZLOADED(*card)) { | |
3693 | zfw_ctrl = card->base_addr + | |
db05c3b1 | 3694 | (readl(&firm_id->zfwctrl_addr) & 0xfffff); |
02f1175c JS |
3695 | board_ctrl = &zfw_ctrl->board_ctrl; |
3696 | ch_ctrl = zfw_ctrl->ch_ctrl; | |
3697 | ||
3698 | if (set & TIOCM_RTS) { | |
9fa1b3b1 | 3699 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c | 3700 | cy_writel(&ch_ctrl[channel].rs_control, |
db05c3b1 JS |
3701 | readl(&ch_ctrl[channel].rs_control) | |
3702 | C_RS_RTS); | |
9fa1b3b1 | 3703 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3704 | } |
3705 | if (clear & TIOCM_RTS) { | |
9fa1b3b1 | 3706 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c | 3707 | cy_writel(&ch_ctrl[channel].rs_control, |
db05c3b1 JS |
3708 | readl(&ch_ctrl[channel].rs_control) & |
3709 | ~C_RS_RTS); | |
9fa1b3b1 | 3710 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3711 | } |
3712 | if (set & TIOCM_DTR) { | |
9fa1b3b1 | 3713 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c | 3714 | cy_writel(&ch_ctrl[channel].rs_control, |
db05c3b1 JS |
3715 | readl(&ch_ctrl[channel].rs_control) | |
3716 | C_RS_DTR); | |
1da177e4 | 3717 | #ifdef CY_DEBUG_DTR |
21719191 JS |
3718 | printk(KERN_DEBUG "cyc:set_modem_info raising " |
3719 | "Z DTR\n"); | |
1da177e4 | 3720 | #endif |
9fa1b3b1 | 3721 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3722 | } |
3723 | if (clear & TIOCM_DTR) { | |
9fa1b3b1 | 3724 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c | 3725 | cy_writel(&ch_ctrl[channel].rs_control, |
db05c3b1 JS |
3726 | readl(&ch_ctrl[channel].rs_control) & |
3727 | ~C_RS_DTR); | |
1da177e4 | 3728 | #ifdef CY_DEBUG_DTR |
21719191 JS |
3729 | printk(KERN_DEBUG "cyc:set_modem_info clearing " |
3730 | "Z DTR\n"); | |
1da177e4 | 3731 | #endif |
9fa1b3b1 | 3732 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3733 | } |
3734 | } else { | |
3735 | return -ENODEV; | |
3736 | } | |
9fa1b3b1 JS |
3737 | spin_lock_irqsave(&card->card_lock, flags); |
3738 | retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L); | |
02f1175c | 3739 | if (retval != 0) { |
21719191 JS |
3740 | printk(KERN_ERR "cyc:set_modem_info retval on ttyC%d " |
3741 | "was %x\n", info->line, retval); | |
02f1175c | 3742 | } |
9fa1b3b1 | 3743 | spin_unlock_irqrestore(&card->card_lock, flags); |
1da177e4 | 3744 | } |
02f1175c JS |
3745 | return 0; |
3746 | } /* cy_tiocmset */ | |
1da177e4 LT |
3747 | |
3748 | /* | |
3749 | * cy_break() --- routine which turns the break handling on or off | |
3750 | */ | |
02f1175c | 3751 | static void cy_break(struct tty_struct *tty, int break_state) |
1da177e4 | 3752 | { |
cab9bdd1 | 3753 | struct cyclades_port *info = tty->driver_data; |
9fa1b3b1 | 3754 | struct cyclades_card *card; |
02f1175c | 3755 | unsigned long flags; |
1da177e4 | 3756 | |
02f1175c JS |
3757 | if (serial_paranoia_check(info, tty->name, "cy_break")) |
3758 | return; | |
1da177e4 | 3759 | |
9fa1b3b1 JS |
3760 | card = info->card; |
3761 | ||
3762 | spin_lock_irqsave(&card->card_lock, flags); | |
3763 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
3764 | /* Let the transmit ISR take care of this (since it |
3765 | requires stuffing characters into the output stream). | |
3766 | */ | |
3767 | if (break_state == -1) { | |
3768 | if (!info->breakon) { | |
3769 | info->breakon = 1; | |
3770 | if (!info->xmit_cnt) { | |
9fa1b3b1 | 3771 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c | 3772 | start_xmit(info); |
9fa1b3b1 | 3773 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
3774 | } |
3775 | } | |
3776 | } else { | |
3777 | if (!info->breakoff) { | |
3778 | info->breakoff = 1; | |
3779 | if (!info->xmit_cnt) { | |
9fa1b3b1 | 3780 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c | 3781 | start_xmit(info); |
9fa1b3b1 | 3782 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
3783 | } |
3784 | } | |
1da177e4 | 3785 | } |
1da177e4 | 3786 | } else { |
02f1175c JS |
3787 | int retval; |
3788 | ||
3789 | if (break_state == -1) { | |
9fa1b3b1 JS |
3790 | retval = cyz_issue_cmd(card, |
3791 | info->line - card->first_line, | |
02f1175c JS |
3792 | C_CM_SET_BREAK, 0L); |
3793 | if (retval != 0) { | |
21719191 JS |
3794 | printk(KERN_ERR "cyc:cy_break (set) retval on " |
3795 | "ttyC%d was %x\n", info->line, retval); | |
02f1175c JS |
3796 | } |
3797 | } else { | |
9fa1b3b1 JS |
3798 | retval = cyz_issue_cmd(card, |
3799 | info->line - card->first_line, | |
02f1175c JS |
3800 | C_CM_CLR_BREAK, 0L); |
3801 | if (retval != 0) { | |
21719191 JS |
3802 | printk(KERN_DEBUG "cyc:cy_break (clr) retval " |
3803 | "on ttyC%d was %x\n", info->line, | |
3804 | retval); | |
02f1175c | 3805 | } |
1da177e4 | 3806 | } |
1da177e4 | 3807 | } |
9fa1b3b1 | 3808 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c | 3809 | } /* cy_break */ |
1da177e4 LT |
3810 | |
3811 | static int | |
02f1175c | 3812 | get_mon_info(struct cyclades_port *info, struct cyclades_monitor __user * mon) |
1da177e4 LT |
3813 | { |
3814 | ||
02f1175c JS |
3815 | if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor))) |
3816 | return -EFAULT; | |
3817 | info->mon.int_count = 0; | |
3818 | info->mon.char_count = 0; | |
3819 | info->mon.char_max = 0; | |
3820 | info->mon.char_last = 0; | |
3821 | return 0; | |
3822 | } /* get_mon_info */ | |
1da177e4 | 3823 | |
02f1175c | 3824 | static int set_threshold(struct cyclades_port *info, unsigned long value) |
1da177e4 | 3825 | { |
875b206b | 3826 | struct cyclades_card *card; |
02f1175c | 3827 | void __iomem *base_addr; |
875b206b | 3828 | int channel, chip, index; |
02f1175c | 3829 | unsigned long flags; |
1da177e4 | 3830 | |
02f1175c | 3831 | card = info->card; |
875b206b JS |
3832 | channel = info->line - card->first_line; |
3833 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
3834 | chip = channel >> 2; |
3835 | channel &= 0x03; | |
875b206b | 3836 | index = card->bus_index; |
02f1175c | 3837 | base_addr = |
875b206b | 3838 | card->base_addr + (cy_chip_offset[chip] << index); |
02f1175c JS |
3839 | |
3840 | info->cor3 &= ~CyREC_FIFO; | |
3841 | info->cor3 |= value & CyREC_FIFO; | |
1da177e4 | 3842 | |
9fa1b3b1 | 3843 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
3844 | cy_writeb(base_addr + (CyCOR3 << index), info->cor3); |
3845 | cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR3ch, index); | |
9fa1b3b1 | 3846 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3847 | } |
3848 | return 0; | |
3849 | } /* set_threshold */ | |
1da177e4 LT |
3850 | |
3851 | static int | |
02f1175c | 3852 | get_threshold(struct cyclades_port *info, unsigned long __user * value) |
1da177e4 | 3853 | { |
875b206b | 3854 | struct cyclades_card *card; |
02f1175c | 3855 | void __iomem *base_addr; |
875b206b | 3856 | int channel, chip, index; |
02f1175c | 3857 | unsigned long tmp; |
1da177e4 | 3858 | |
02f1175c | 3859 | card = info->card; |
875b206b JS |
3860 | channel = info->line - card->first_line; |
3861 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
3862 | chip = channel >> 2; |
3863 | channel &= 0x03; | |
875b206b JS |
3864 | index = card->bus_index; |
3865 | base_addr = card->base_addr + (cy_chip_offset[chip] << index); | |
02f1175c | 3866 | |
db05c3b1 | 3867 | tmp = readb(base_addr + (CyCOR3 << index)) & CyREC_FIFO; |
02f1175c | 3868 | return put_user(tmp, value); |
02f1175c | 3869 | } |
f7429034 | 3870 | return 0; |
02f1175c | 3871 | } /* get_threshold */ |
1da177e4 LT |
3872 | |
3873 | static int | |
02f1175c | 3874 | set_default_threshold(struct cyclades_port *info, unsigned long value) |
1da177e4 | 3875 | { |
02f1175c JS |
3876 | info->default_threshold = value & 0x0f; |
3877 | return 0; | |
3878 | } /* set_default_threshold */ | |
1da177e4 LT |
3879 | |
3880 | static int | |
02f1175c | 3881 | get_default_threshold(struct cyclades_port *info, unsigned long __user * value) |
1da177e4 | 3882 | { |
02f1175c JS |
3883 | return put_user(info->default_threshold, value); |
3884 | } /* get_default_threshold */ | |
1da177e4 | 3885 | |
02f1175c | 3886 | static int set_timeout(struct cyclades_port *info, unsigned long value) |
1da177e4 | 3887 | { |
875b206b | 3888 | struct cyclades_card *card; |
02f1175c | 3889 | void __iomem *base_addr; |
875b206b | 3890 | int channel, chip, index; |
02f1175c | 3891 | unsigned long flags; |
1da177e4 | 3892 | |
02f1175c | 3893 | card = info->card; |
875b206b JS |
3894 | channel = info->line - card->first_line; |
3895 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
3896 | chip = channel >> 2; |
3897 | channel &= 0x03; | |
875b206b JS |
3898 | index = card->bus_index; |
3899 | base_addr = card->base_addr + (cy_chip_offset[chip] << index); | |
1da177e4 | 3900 | |
9fa1b3b1 | 3901 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c | 3902 | cy_writeb(base_addr + (CyRTPR << index), value & 0xff); |
9fa1b3b1 | 3903 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3904 | } |
3905 | return 0; | |
3906 | } /* set_timeout */ | |
1da177e4 | 3907 | |
02f1175c | 3908 | static int get_timeout(struct cyclades_port *info, unsigned long __user * value) |
1da177e4 | 3909 | { |
875b206b | 3910 | struct cyclades_card *card; |
02f1175c | 3911 | void __iomem *base_addr; |
875b206b | 3912 | int channel, chip, index; |
02f1175c | 3913 | unsigned long tmp; |
1da177e4 | 3914 | |
02f1175c | 3915 | card = info->card; |
875b206b JS |
3916 | channel = info->line - card->first_line; |
3917 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
3918 | chip = channel >> 2; |
3919 | channel &= 0x03; | |
875b206b JS |
3920 | index = card->bus_index; |
3921 | base_addr = card->base_addr + (cy_chip_offset[chip] << index); | |
02f1175c | 3922 | |
db05c3b1 | 3923 | tmp = readb(base_addr + (CyRTPR << index)); |
02f1175c | 3924 | return put_user(tmp, value); |
02f1175c | 3925 | } |
f7429034 | 3926 | return 0; |
02f1175c | 3927 | } /* get_timeout */ |
1da177e4 | 3928 | |
02f1175c | 3929 | static int set_default_timeout(struct cyclades_port *info, unsigned long value) |
1da177e4 | 3930 | { |
02f1175c JS |
3931 | info->default_timeout = value & 0xff; |
3932 | return 0; | |
3933 | } /* set_default_timeout */ | |
1da177e4 LT |
3934 | |
3935 | static int | |
02f1175c | 3936 | get_default_timeout(struct cyclades_port *info, unsigned long __user * value) |
1da177e4 | 3937 | { |
02f1175c JS |
3938 | return put_user(info->default_timeout, value); |
3939 | } /* get_default_timeout */ | |
1da177e4 LT |
3940 | |
3941 | /* | |
3942 | * This routine allows the tty driver to implement device- | |
3943 | * specific ioctl's. If the ioctl number passed in cmd is | |
3944 | * not recognized by the driver, it should return ENOIOCTLCMD. | |
3945 | */ | |
3946 | static int | |
02f1175c JS |
3947 | cy_ioctl(struct tty_struct *tty, struct file *file, |
3948 | unsigned int cmd, unsigned long arg) | |
1da177e4 | 3949 | { |
cab9bdd1 | 3950 | struct cyclades_port *info = tty->driver_data; |
02f1175c JS |
3951 | struct cyclades_icount cprev, cnow; /* kernel counter temps */ |
3952 | struct serial_icounter_struct __user *p_cuser; /* user space */ | |
3953 | int ret_val = 0; | |
3954 | unsigned long flags; | |
3955 | void __user *argp = (void __user *)arg; | |
3956 | ||
3957 | if (serial_paranoia_check(info, tty->name, "cy_ioctl")) | |
3958 | return -ENODEV; | |
1da177e4 LT |
3959 | |
3960 | #ifdef CY_DEBUG_OTHER | |
21719191 JS |
3961 | printk(KERN_DEBUG "cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n", |
3962 | info->line, cmd, arg); | |
1da177e4 LT |
3963 | #endif |
3964 | ||
02f1175c JS |
3965 | switch (cmd) { |
3966 | case CYGETMON: | |
3967 | ret_val = get_mon_info(info, argp); | |
3968 | break; | |
3969 | case CYGETTHRESH: | |
3970 | ret_val = get_threshold(info, argp); | |
3971 | break; | |
3972 | case CYSETTHRESH: | |
3973 | ret_val = set_threshold(info, arg); | |
3974 | break; | |
3975 | case CYGETDEFTHRESH: | |
3976 | ret_val = get_default_threshold(info, argp); | |
3977 | break; | |
3978 | case CYSETDEFTHRESH: | |
3979 | ret_val = set_default_threshold(info, arg); | |
3980 | break; | |
3981 | case CYGETTIMEOUT: | |
3982 | ret_val = get_timeout(info, argp); | |
3983 | break; | |
3984 | case CYSETTIMEOUT: | |
3985 | ret_val = set_timeout(info, arg); | |
3986 | break; | |
3987 | case CYGETDEFTIMEOUT: | |
3988 | ret_val = get_default_timeout(info, argp); | |
3989 | break; | |
3990 | case CYSETDEFTIMEOUT: | |
3991 | ret_val = set_default_timeout(info, arg); | |
3992 | break; | |
1da177e4 | 3993 | case CYSETRFLOW: |
02f1175c JS |
3994 | info->rflow = (int)arg; |
3995 | ret_val = 0; | |
3996 | break; | |
1da177e4 | 3997 | case CYGETRFLOW: |
02f1175c JS |
3998 | ret_val = info->rflow; |
3999 | break; | |
1da177e4 | 4000 | case CYSETRTSDTR_INV: |
02f1175c JS |
4001 | info->rtsdtr_inv = (int)arg; |
4002 | ret_val = 0; | |
4003 | break; | |
1da177e4 | 4004 | case CYGETRTSDTR_INV: |
02f1175c JS |
4005 | ret_val = info->rtsdtr_inv; |
4006 | break; | |
1da177e4 | 4007 | case CYGETCD1400VER: |
02f1175c JS |
4008 | ret_val = info->chip_rev; |
4009 | break; | |
1da177e4 LT |
4010 | #ifndef CONFIG_CYZ_INTR |
4011 | case CYZSETPOLLCYCLE: | |
02f1175c JS |
4012 | cyz_polling_cycle = (arg * HZ) / 1000; |
4013 | ret_val = 0; | |
4014 | break; | |
1da177e4 | 4015 | case CYZGETPOLLCYCLE: |
02f1175c JS |
4016 | ret_val = (cyz_polling_cycle * 1000) / HZ; |
4017 | break; | |
4018 | #endif /* CONFIG_CYZ_INTR */ | |
1da177e4 | 4019 | case CYSETWAIT: |
02f1175c JS |
4020 | info->closing_wait = (unsigned short)arg *HZ / 100; |
4021 | ret_val = 0; | |
4022 | break; | |
1da177e4 | 4023 | case CYGETWAIT: |
02f1175c JS |
4024 | ret_val = info->closing_wait / (HZ / 100); |
4025 | break; | |
4026 | case TIOCGSERIAL: | |
4027 | ret_val = get_serial_info(info, argp); | |
4028 | break; | |
4029 | case TIOCSSERIAL: | |
4030 | ret_val = set_serial_info(info, argp); | |
4031 | break; | |
4032 | case TIOCSERGETLSR: /* Get line status register */ | |
4033 | ret_val = get_lsr_info(info, argp); | |
4034 | break; | |
4035 | /* | |
4036 | * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change | |
4037 | * - mask passed in arg for lines of interest | |
4038 | * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) | |
4039 | * Caller should use TIOCGICOUNT to see which one it was | |
4040 | */ | |
1da177e4 | 4041 | case TIOCMIWAIT: |
9fa1b3b1 | 4042 | spin_lock_irqsave(&info->card->card_lock, flags); |
02f1175c | 4043 | /* note the counters on entry */ |
2c7fea99 | 4044 | cnow = info->icount; |
9fa1b3b1 | 4045 | spin_unlock_irqrestore(&info->card->card_lock, flags); |
2c7fea99 JS |
4046 | ret_val = wait_event_interruptible(info->delta_msr_wait, ({ |
4047 | cprev = cnow; | |
9fa1b3b1 | 4048 | spin_lock_irqsave(&info->card->card_lock, flags); |
02f1175c | 4049 | cnow = info->icount; /* atomic copy */ |
9fa1b3b1 | 4050 | spin_unlock_irqrestore(&info->card->card_lock, flags); |
02f1175c | 4051 | |
2c7fea99 JS |
4052 | ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || |
4053 | ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || | |
4054 | ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || | |
4055 | ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)); | |
4056 | })); | |
4057 | break; | |
1da177e4 | 4058 | |
02f1175c JS |
4059 | /* |
4060 | * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) | |
4061 | * Return: write counters to the user passed counter struct | |
4062 | * NB: both 1->0 and 0->1 transitions are counted except for | |
4063 | * RI where only 0->1 is counted. | |
4064 | */ | |
1da177e4 | 4065 | case TIOCGICOUNT: |
9fa1b3b1 | 4066 | spin_lock_irqsave(&info->card->card_lock, flags); |
02f1175c | 4067 | cnow = info->icount; |
9fa1b3b1 | 4068 | spin_unlock_irqrestore(&info->card->card_lock, flags); |
02f1175c JS |
4069 | p_cuser = argp; |
4070 | ret_val = put_user(cnow.cts, &p_cuser->cts); | |
4071 | if (ret_val) | |
4072 | return ret_val; | |
4073 | ret_val = put_user(cnow.dsr, &p_cuser->dsr); | |
4074 | if (ret_val) | |
4075 | return ret_val; | |
4076 | ret_val = put_user(cnow.rng, &p_cuser->rng); | |
4077 | if (ret_val) | |
4078 | return ret_val; | |
4079 | ret_val = put_user(cnow.dcd, &p_cuser->dcd); | |
4080 | if (ret_val) | |
4081 | return ret_val; | |
4082 | ret_val = put_user(cnow.rx, &p_cuser->rx); | |
4083 | if (ret_val) | |
4084 | return ret_val; | |
4085 | ret_val = put_user(cnow.tx, &p_cuser->tx); | |
4086 | if (ret_val) | |
4087 | return ret_val; | |
4088 | ret_val = put_user(cnow.frame, &p_cuser->frame); | |
4089 | if (ret_val) | |
4090 | return ret_val; | |
4091 | ret_val = put_user(cnow.overrun, &p_cuser->overrun); | |
4092 | if (ret_val) | |
4093 | return ret_val; | |
4094 | ret_val = put_user(cnow.parity, &p_cuser->parity); | |
4095 | if (ret_val) | |
4096 | return ret_val; | |
4097 | ret_val = put_user(cnow.brk, &p_cuser->brk); | |
4098 | if (ret_val) | |
4099 | return ret_val; | |
4100 | ret_val = put_user(cnow.buf_overrun, &p_cuser->buf_overrun); | |
4101 | if (ret_val) | |
4102 | return ret_val; | |
4103 | ret_val = 0; | |
4104 | break; | |
4105 | default: | |
4106 | ret_val = -ENOIOCTLCMD; | |
4107 | } | |
1da177e4 LT |
4108 | |
4109 | #ifdef CY_DEBUG_OTHER | |
21719191 | 4110 | printk(KERN_DEBUG "cyc:cy_ioctl done\n"); |
1da177e4 LT |
4111 | #endif |
4112 | ||
02f1175c JS |
4113 | return ret_val; |
4114 | } /* cy_ioctl */ | |
1da177e4 LT |
4115 | |
4116 | /* | |
4117 | * This routine allows the tty driver to be notified when | |
4118 | * device's termios settings have changed. Note that a | |
4119 | * well-designed tty driver should be prepared to accept the case | |
4120 | * where old == NULL, and try to do something rational. | |
4121 | */ | |
02f1175c | 4122 | static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios) |
1da177e4 | 4123 | { |
cab9bdd1 | 4124 | struct cyclades_port *info = tty->driver_data; |
1da177e4 LT |
4125 | |
4126 | #ifdef CY_DEBUG_OTHER | |
21719191 | 4127 | printk(KERN_DEBUG "cyc:cy_set_termios ttyC%d\n", info->line); |
1da177e4 LT |
4128 | #endif |
4129 | ||
02f1175c JS |
4130 | set_line_char(info); |
4131 | ||
4132 | if ((old_termios->c_cflag & CRTSCTS) && | |
4133 | !(tty->termios->c_cflag & CRTSCTS)) { | |
4134 | tty->hw_stopped = 0; | |
4135 | cy_start(tty); | |
4136 | } | |
1da177e4 | 4137 | #if 0 |
02f1175c JS |
4138 | /* |
4139 | * No need to wake up processes in open wait, since they | |
4140 | * sample the CLOCAL flag once, and don't recheck it. | |
4141 | * XXX It's not clear whether the current behavior is correct | |
4142 | * or not. Hence, this may change..... | |
4143 | */ | |
4144 | if (!(old_termios->c_cflag & CLOCAL) && | |
4145 | (tty->termios->c_cflag & CLOCAL)) | |
4146 | wake_up_interruptible(&info->open_wait); | |
1da177e4 | 4147 | #endif |
02f1175c | 4148 | } /* cy_set_termios */ |
1da177e4 LT |
4149 | |
4150 | /* This function is used to send a high-priority XON/XOFF character to | |
4151 | the device. | |
4152 | */ | |
02f1175c | 4153 | static void cy_send_xchar(struct tty_struct *tty, char ch) |
1da177e4 | 4154 | { |
cab9bdd1 | 4155 | struct cyclades_port *info = tty->driver_data; |
875b206b JS |
4156 | struct cyclades_card *card; |
4157 | int channel; | |
1da177e4 | 4158 | |
02f1175c | 4159 | if (serial_paranoia_check(info, tty->name, "cy_send_xchar")) |
1da177e4 LT |
4160 | return; |
4161 | ||
02f1175c | 4162 | info->x_char = ch; |
1da177e4 LT |
4163 | |
4164 | if (ch) | |
02f1175c | 4165 | cy_start(tty); |
1da177e4 LT |
4166 | |
4167 | card = info->card; | |
875b206b | 4168 | channel = info->line - card->first_line; |
1da177e4 | 4169 | |
875b206b | 4170 | if (IS_CYC_Z(*card)) { |
02f1175c | 4171 | if (ch == STOP_CHAR(tty)) |
875b206b | 4172 | cyz_issue_cmd(card, channel, C_CM_SENDXOFF, 0L); |
02f1175c | 4173 | else if (ch == START_CHAR(tty)) |
875b206b | 4174 | cyz_issue_cmd(card, channel, C_CM_SENDXON, 0L); |
1da177e4 LT |
4175 | } |
4176 | } | |
4177 | ||
4178 | /* This routine is called by the upper-layer tty layer to signal | |
4179 | that incoming characters should be throttled because the input | |
4180 | buffers are close to full. | |
4181 | */ | |
02f1175c | 4182 | static void cy_throttle(struct tty_struct *tty) |
1da177e4 | 4183 | { |
cab9bdd1 | 4184 | struct cyclades_port *info = tty->driver_data; |
875b206b | 4185 | struct cyclades_card *card; |
02f1175c JS |
4186 | unsigned long flags; |
4187 | void __iomem *base_addr; | |
875b206b | 4188 | int chip, channel, index; |
1da177e4 LT |
4189 | |
4190 | #ifdef CY_DEBUG_THROTTLE | |
02f1175c | 4191 | char buf[64]; |
1da177e4 | 4192 | |
21719191 | 4193 | printk(KERN_DEBUG "cyc:throttle %s: %ld...ttyC%d\n", tty_name(tty, buf), |
02f1175c | 4194 | tty->ldisc.chars_in_buffer(tty), info->line); |
1da177e4 LT |
4195 | #endif |
4196 | ||
02f1175c JS |
4197 | if (serial_paranoia_check(info, tty->name, "cy_throttle")) { |
4198 | return; | |
4199 | } | |
4200 | ||
4201 | card = info->card; | |
4202 | ||
4203 | if (I_IXOFF(tty)) { | |
875b206b | 4204 | if (!IS_CYC_Z(*card)) |
02f1175c JS |
4205 | cy_send_xchar(tty, STOP_CHAR(tty)); |
4206 | else | |
4207 | info->throttle = 1; | |
4208 | } | |
1da177e4 | 4209 | |
02f1175c | 4210 | if (tty->termios->c_cflag & CRTSCTS) { |
875b206b JS |
4211 | channel = info->line - card->first_line; |
4212 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
4213 | chip = channel >> 2; |
4214 | channel &= 0x03; | |
875b206b JS |
4215 | index = card->bus_index; |
4216 | base_addr = card->base_addr + | |
02f1175c JS |
4217 | (cy_chip_offset[chip] << index); |
4218 | ||
9fa1b3b1 | 4219 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
4220 | cy_writeb(base_addr + (CyCAR << index), |
4221 | (u_char) channel); | |
4222 | if (info->rtsdtr_inv) { | |
4223 | cy_writeb(base_addr + (CyMSVR2 << index), | |
4224 | ~CyDTR); | |
4225 | } else { | |
4226 | cy_writeb(base_addr + (CyMSVR1 << index), | |
4227 | ~CyRTS); | |
4228 | } | |
9fa1b3b1 | 4229 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
4230 | } else { |
4231 | info->throttle = 1; | |
4232 | } | |
4233 | } | |
02f1175c | 4234 | } /* cy_throttle */ |
1da177e4 LT |
4235 | |
4236 | /* | |
4237 | * This routine notifies the tty driver that it should signal | |
4238 | * that characters can now be sent to the tty without fear of | |
4239 | * overrunning the input buffers of the line disciplines. | |
4240 | */ | |
02f1175c | 4241 | static void cy_unthrottle(struct tty_struct *tty) |
1da177e4 | 4242 | { |
cab9bdd1 | 4243 | struct cyclades_port *info = tty->driver_data; |
875b206b | 4244 | struct cyclades_card *card; |
02f1175c JS |
4245 | unsigned long flags; |
4246 | void __iomem *base_addr; | |
875b206b | 4247 | int chip, channel, index; |
1da177e4 LT |
4248 | |
4249 | #ifdef CY_DEBUG_THROTTLE | |
02f1175c JS |
4250 | char buf[64]; |
4251 | ||
21719191 JS |
4252 | printk(KERN_DEBUG "cyc:unthrottle %s: %ld...ttyC%d\n", |
4253 | tty_name(tty, buf), tty->ldisc.chars_in_buffer(tty),info->line); | |
1da177e4 LT |
4254 | #endif |
4255 | ||
02f1175c JS |
4256 | if (serial_paranoia_check(info, tty->name, "cy_unthrottle")) { |
4257 | return; | |
4258 | } | |
1da177e4 | 4259 | |
02f1175c JS |
4260 | if (I_IXOFF(tty)) { |
4261 | if (info->x_char) | |
4262 | info->x_char = 0; | |
4263 | else | |
4264 | cy_send_xchar(tty, START_CHAR(tty)); | |
1da177e4 | 4265 | } |
1da177e4 | 4266 | |
02f1175c JS |
4267 | if (tty->termios->c_cflag & CRTSCTS) { |
4268 | card = info->card; | |
875b206b JS |
4269 | channel = info->line - card->first_line; |
4270 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
4271 | chip = channel >> 2; |
4272 | channel &= 0x03; | |
875b206b JS |
4273 | index = card->bus_index; |
4274 | base_addr = card->base_addr + | |
02f1175c JS |
4275 | (cy_chip_offset[chip] << index); |
4276 | ||
9fa1b3b1 | 4277 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
4278 | cy_writeb(base_addr + (CyCAR << index), |
4279 | (u_char) channel); | |
4280 | if (info->rtsdtr_inv) { | |
4281 | cy_writeb(base_addr + (CyMSVR2 << index), | |
4282 | CyDTR); | |
4283 | } else { | |
4284 | cy_writeb(base_addr + (CyMSVR1 << index), | |
4285 | CyRTS); | |
4286 | } | |
9fa1b3b1 | 4287 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
4288 | } else { |
4289 | info->throttle = 0; | |
4290 | } | |
4291 | } | |
02f1175c | 4292 | } /* cy_unthrottle */ |
1da177e4 LT |
4293 | |
4294 | /* cy_start and cy_stop provide software output flow control as a | |
4295 | function of XON/XOFF, software CTS, and other such stuff. | |
4296 | */ | |
02f1175c | 4297 | static void cy_stop(struct tty_struct *tty) |
1da177e4 | 4298 | { |
02f1175c | 4299 | struct cyclades_card *cinfo; |
cab9bdd1 | 4300 | struct cyclades_port *info = tty->driver_data; |
02f1175c JS |
4301 | void __iomem *base_addr; |
4302 | int chip, channel, index; | |
4303 | unsigned long flags; | |
1da177e4 LT |
4304 | |
4305 | #ifdef CY_DEBUG_OTHER | |
21719191 | 4306 | printk(KERN_DEBUG "cyc:cy_stop ttyC%d\n", info->line); |
1da177e4 LT |
4307 | #endif |
4308 | ||
02f1175c JS |
4309 | if (serial_paranoia_check(info, tty->name, "cy_stop")) |
4310 | return; | |
1da177e4 | 4311 | |
875b206b | 4312 | cinfo = info->card; |
02f1175c JS |
4313 | channel = info->line - cinfo->first_line; |
4314 | if (!IS_CYC_Z(*cinfo)) { | |
4315 | index = cinfo->bus_index; | |
4316 | chip = channel >> 2; | |
4317 | channel &= 0x03; | |
9fa1b3b1 | 4318 | base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index); |
1da177e4 | 4319 | |
9fa1b3b1 | 4320 | spin_lock_irqsave(&cinfo->card_lock, flags); |
02f1175c JS |
4321 | cy_writeb(base_addr + (CyCAR << index), |
4322 | (u_char)(channel & 0x0003)); /* index channel */ | |
4323 | cy_writeb(base_addr + (CySRER << index), | |
db05c3b1 | 4324 | readb(base_addr + (CySRER << index)) & ~CyTxRdy); |
9fa1b3b1 | 4325 | spin_unlock_irqrestore(&cinfo->card_lock, flags); |
02f1175c | 4326 | } |
02f1175c | 4327 | } /* cy_stop */ |
1da177e4 | 4328 | |
02f1175c | 4329 | static void cy_start(struct tty_struct *tty) |
1da177e4 | 4330 | { |
02f1175c | 4331 | struct cyclades_card *cinfo; |
cab9bdd1 | 4332 | struct cyclades_port *info = tty->driver_data; |
02f1175c JS |
4333 | void __iomem *base_addr; |
4334 | int chip, channel, index; | |
4335 | unsigned long flags; | |
1da177e4 LT |
4336 | |
4337 | #ifdef CY_DEBUG_OTHER | |
21719191 | 4338 | printk(KERN_DEBUG "cyc:cy_start ttyC%d\n", info->line); |
1da177e4 LT |
4339 | #endif |
4340 | ||
02f1175c JS |
4341 | if (serial_paranoia_check(info, tty->name, "cy_start")) |
4342 | return; | |
1da177e4 | 4343 | |
875b206b | 4344 | cinfo = info->card; |
02f1175c JS |
4345 | channel = info->line - cinfo->first_line; |
4346 | index = cinfo->bus_index; | |
4347 | if (!IS_CYC_Z(*cinfo)) { | |
4348 | chip = channel >> 2; | |
4349 | channel &= 0x03; | |
9fa1b3b1 | 4350 | base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index); |
1da177e4 | 4351 | |
9fa1b3b1 | 4352 | spin_lock_irqsave(&cinfo->card_lock, flags); |
02f1175c JS |
4353 | cy_writeb(base_addr + (CyCAR << index), (u_char) (channel & 0x0003)); /* index channel */ |
4354 | cy_writeb(base_addr + (CySRER << index), | |
db05c3b1 | 4355 | readb(base_addr + (CySRER << index)) | CyTxRdy); |
9fa1b3b1 | 4356 | spin_unlock_irqrestore(&cinfo->card_lock, flags); |
02f1175c | 4357 | } |
02f1175c | 4358 | } /* cy_start */ |
1da177e4 | 4359 | |
02f1175c | 4360 | static void cy_flush_buffer(struct tty_struct *tty) |
1da177e4 | 4361 | { |
cab9bdd1 | 4362 | struct cyclades_port *info = tty->driver_data; |
875b206b JS |
4363 | struct cyclades_card *card; |
4364 | int channel, retval; | |
02f1175c JS |
4365 | unsigned long flags; |
4366 | ||
1da177e4 | 4367 | #ifdef CY_DEBUG_IO |
21719191 | 4368 | printk(KERN_DEBUG "cyc:cy_flush_buffer ttyC%d\n", info->line); |
1da177e4 LT |
4369 | #endif |
4370 | ||
02f1175c JS |
4371 | if (serial_paranoia_check(info, tty->name, "cy_flush_buffer")) |
4372 | return; | |
1da177e4 | 4373 | |
02f1175c | 4374 | card = info->card; |
875b206b | 4375 | channel = info->line - card->first_line; |
1da177e4 | 4376 | |
9fa1b3b1 | 4377 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c | 4378 | info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; |
9fa1b3b1 | 4379 | spin_unlock_irqrestore(&card->card_lock, flags); |
1da177e4 | 4380 | |
875b206b | 4381 | if (IS_CYC_Z(*card)) { /* If it is a Z card, flush the on-board |
02f1175c | 4382 | buffers as well */ |
9fa1b3b1 | 4383 | spin_lock_irqsave(&card->card_lock, flags); |
875b206b | 4384 | retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_TX, 0L); |
02f1175c | 4385 | if (retval != 0) { |
21719191 JS |
4386 | printk(KERN_ERR "cyc: flush_buffer retval on ttyC%d " |
4387 | "was %x\n", info->line, retval); | |
02f1175c | 4388 | } |
9fa1b3b1 | 4389 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
4390 | } |
4391 | tty_wakeup(tty); | |
02f1175c | 4392 | } /* cy_flush_buffer */ |
1da177e4 LT |
4393 | |
4394 | /* | |
4395 | * cy_hangup() --- called by tty_hangup() when a hangup is signaled. | |
4396 | */ | |
02f1175c | 4397 | static void cy_hangup(struct tty_struct *tty) |
1da177e4 | 4398 | { |
cab9bdd1 | 4399 | struct cyclades_port *info = tty->driver_data; |
02f1175c | 4400 | |
1da177e4 | 4401 | #ifdef CY_DEBUG_OTHER |
21719191 | 4402 | printk(KERN_DEBUG "cyc:cy_hangup ttyC%d\n", info->line); |
1da177e4 LT |
4403 | #endif |
4404 | ||
02f1175c JS |
4405 | if (serial_paranoia_check(info, tty->name, "cy_hangup")) |
4406 | return; | |
1da177e4 | 4407 | |
02f1175c JS |
4408 | cy_flush_buffer(tty); |
4409 | shutdown(info); | |
4410 | info->event = 0; | |
4411 | info->count = 0; | |
1da177e4 | 4412 | #ifdef CY_DEBUG_COUNT |
21719191 JS |
4413 | printk(KERN_DEBUG "cyc:cy_hangup (%d): setting count to 0\n", |
4414 | current->pid); | |
1da177e4 | 4415 | #endif |
02f1175c JS |
4416 | info->tty = NULL; |
4417 | info->flags &= ~ASYNC_NORMAL_ACTIVE; | |
4418 | wake_up_interruptible(&info->open_wait); | |
4419 | } /* cy_hangup */ | |
1da177e4 LT |
4420 | |
4421 | /* | |
4422 | * --------------------------------------------------------------------- | |
4423 | * cy_init() and friends | |
4424 | * | |
4425 | * cy_init() is called at boot-time to initialize the serial driver. | |
4426 | * --------------------------------------------------------------------- | |
4427 | */ | |
4428 | ||
dd025c0c | 4429 | static int __devinit cy_init_card(struct cyclades_card *cinfo) |
0809e267 JS |
4430 | { |
4431 | struct cyclades_port *info; | |
4432 | u32 mailbox; | |
4433 | unsigned int nports; | |
4434 | unsigned short chip_number; | |
4435 | int index, port; | |
4436 | ||
3046d50e JS |
4437 | spin_lock_init(&cinfo->card_lock); |
4438 | ||
c2ad4c75 | 4439 | if (IS_CYC_Z(*cinfo)) { /* Cyclades-Z */ |
0809e267 JS |
4440 | mailbox = readl(&((struct RUNTIME_9060 __iomem *) |
4441 | cinfo->ctl_addr)->mail_box_0); | |
4442 | nports = (mailbox == ZE_V1) ? ZE_V1_NPORTS : 8; | |
4443 | cinfo->intr_enabled = 0; | |
4444 | cinfo->nports = 0; /* Will be correctly set later, after | |
4445 | Z FW is loaded */ | |
3046d50e JS |
4446 | } else { |
4447 | index = cinfo->bus_index; | |
4448 | nports = cinfo->nports = CyPORTS_PER_CHIP * cinfo->num_chips; | |
4449 | } | |
4450 | ||
dd025c0c JS |
4451 | cinfo->ports = kzalloc(sizeof(*cinfo->ports) * nports, GFP_KERNEL); |
4452 | if (cinfo->ports == NULL) { | |
4453 | printk(KERN_ERR "Cyclades: cannot allocate ports\n"); | |
3137553d | 4454 | cinfo->nports = 0; |
dd025c0c JS |
4455 | return -ENOMEM; |
4456 | } | |
4457 | ||
3046d50e JS |
4458 | for (port = cinfo->first_line; port < cinfo->first_line + nports; |
4459 | port++) { | |
dd025c0c | 4460 | info = &cinfo->ports[port - cinfo->first_line]; |
3046d50e | 4461 | info->magic = CYCLADES_MAGIC; |
875b206b | 4462 | info->card = cinfo; |
3046d50e JS |
4463 | info->line = port; |
4464 | info->flags = STD_COM_FLAGS; | |
4465 | info->closing_wait = CLOSING_WAIT_DELAY; | |
4466 | info->close_delay = 5 * HZ / 10; | |
4467 | ||
4468 | INIT_WORK(&info->tqueue, do_softint); | |
4469 | init_waitqueue_head(&info->open_wait); | |
4470 | init_waitqueue_head(&info->close_wait); | |
2c7fea99 | 4471 | init_completion(&info->shutdown_wait); |
3046d50e JS |
4472 | init_waitqueue_head(&info->delta_msr_wait); |
4473 | ||
4474 | if (IS_CYC_Z(*cinfo)) { | |
0809e267 | 4475 | info->type = PORT_STARTECH; |
0809e267 JS |
4476 | if (mailbox == ZO_V1) |
4477 | info->xmit_fifo_size = CYZ_FIFO_SIZE; | |
4478 | else | |
3046d50e | 4479 | info->xmit_fifo_size = 4 * CYZ_FIFO_SIZE; |
0809e267 | 4480 | #ifdef CONFIG_CYZ_INTR |
3991428d JS |
4481 | setup_timer(&cyz_rx_full_timer[port], |
4482 | cyz_rx_restart, (unsigned long)info); | |
0809e267 | 4483 | #endif |
3046d50e | 4484 | } else { |
0809e267 | 4485 | info->type = PORT_CIRRUS; |
0809e267 | 4486 | info->xmit_fifo_size = CyMAX_CHAR_FIFO; |
3046d50e | 4487 | info->cor1 = CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS; |
0809e267 JS |
4488 | info->cor2 = CyETC; |
4489 | info->cor3 = 0x08; /* _very_ small rcv threshold */ | |
3046d50e | 4490 | |
0809e267 | 4491 | chip_number = (port - cinfo->first_line) / 4; |
3046d50e | 4492 | if ((info->chip_rev = readb(cinfo->base_addr + |
0809e267 JS |
4493 | (cy_chip_offset[chip_number] << |
4494 | index) + (CyGFRCR << index))) >= | |
4495 | CD1400_REV_J) { | |
4496 | /* It is a CD1400 rev. J or later */ | |
4497 | info->tbpr = baud_bpr_60[13]; /* Tx BPR */ | |
4498 | info->tco = baud_co_60[13]; /* Tx CO */ | |
4499 | info->rbpr = baud_bpr_60[13]; /* Rx BPR */ | |
4500 | info->rco = baud_co_60[13]; /* Rx CO */ | |
0809e267 JS |
4501 | info->rtsdtr_inv = 1; |
4502 | } else { | |
4503 | info->tbpr = baud_bpr_25[13]; /* Tx BPR */ | |
4504 | info->tco = baud_co_25[13]; /* Tx CO */ | |
4505 | info->rbpr = baud_bpr_25[13]; /* Rx BPR */ | |
4506 | info->rco = baud_co_25[13]; /* Rx CO */ | |
0809e267 JS |
4507 | info->rtsdtr_inv = 0; |
4508 | } | |
3046d50e JS |
4509 | info->read_status_mask = CyTIMEOUT | CySPECHAR | |
4510 | CyBREAK | CyPARITY | CyFRAME | CyOVERRUN; | |
0809e267 | 4511 | } |
3046d50e | 4512 | |
0809e267 | 4513 | } |
3046d50e JS |
4514 | |
4515 | #ifndef CONFIG_CYZ_INTR | |
4516 | if (IS_CYC_Z(*cinfo) && !timer_pending(&cyz_timerlist)) { | |
4517 | mod_timer(&cyz_timerlist, jiffies + 1); | |
4518 | #ifdef CY_PCI_DEBUG | |
4519 | printk(KERN_DEBUG "Cyclades-Z polling initialized\n"); | |
4520 | #endif | |
4521 | } | |
4522 | #endif | |
dd025c0c | 4523 | return 0; |
0809e267 JS |
4524 | } |
4525 | ||
1da177e4 LT |
4526 | /* initialize chips on Cyclom-Y card -- return number of valid |
4527 | chips (which is number of ports/4) */ | |
31b4f0a1 JS |
4528 | static unsigned short __devinit cyy_init_card(void __iomem *true_base_addr, |
4529 | int index) | |
1da177e4 | 4530 | { |
02f1175c JS |
4531 | unsigned int chip_number; |
4532 | void __iomem *base_addr; | |
4533 | ||
4534 | cy_writeb(true_base_addr + (Cy_HwReset << index), 0); | |
4535 | /* Cy_HwReset is 0x1400 */ | |
4536 | cy_writeb(true_base_addr + (Cy_ClrIntr << index), 0); | |
4537 | /* Cy_ClrIntr is 0x1800 */ | |
4538 | udelay(500L); | |
4539 | ||
4540 | for (chip_number = 0; chip_number < CyMAX_CHIPS_PER_CARD; chip_number++) { | |
4541 | base_addr = | |
4542 | true_base_addr + (cy_chip_offset[chip_number] << index); | |
4543 | mdelay(1); | |
db05c3b1 | 4544 | if (readb(base_addr + (CyCCR << index)) != 0x00) { |
02f1175c JS |
4545 | /************* |
4546 | printk(" chip #%d at %#6lx is never idle (CCR != 0)\n", | |
4547 | chip_number, (unsigned long)base_addr); | |
4548 | *************/ | |
4549 | return chip_number; | |
4550 | } | |
4551 | ||
4552 | cy_writeb(base_addr + (CyGFRCR << index), 0); | |
4553 | udelay(10L); | |
4554 | ||
4555 | /* The Cyclom-16Y does not decode address bit 9 and therefore | |
4556 | cannot distinguish between references to chip 0 and a non- | |
4557 | existent chip 4. If the preceding clearing of the supposed | |
4558 | chip 4 GFRCR register appears at chip 0, there is no chip 4 | |
4559 | and this must be a Cyclom-16Y, not a Cyclom-32Ye. | |
4560 | */ | |
db05c3b1 | 4561 | if (chip_number == 4 && readb(true_base_addr + |
02f1175c JS |
4562 | (cy_chip_offset[0] << index) + |
4563 | (CyGFRCR << index)) == 0) { | |
4564 | return chip_number; | |
4565 | } | |
4566 | ||
4567 | cy_writeb(base_addr + (CyCCR << index), CyCHIP_RESET); | |
4568 | mdelay(1); | |
4569 | ||
db05c3b1 | 4570 | if (readb(base_addr + (CyGFRCR << index)) == 0x00) { |
02f1175c JS |
4571 | /* |
4572 | printk(" chip #%d at %#6lx is not responding ", | |
4573 | chip_number, (unsigned long)base_addr); | |
4574 | printk("(GFRCR stayed 0)\n", | |
4575 | */ | |
4576 | return chip_number; | |
4577 | } | |
db05c3b1 | 4578 | if ((0xf0 & (readb(base_addr + (CyGFRCR << index)))) != |
02f1175c JS |
4579 | 0x40) { |
4580 | /* | |
4581 | printk(" chip #%d at %#6lx is not valid (GFRCR == " | |
4582 | "%#2x)\n", | |
4583 | chip_number, (unsigned long)base_addr, | |
4584 | base_addr[CyGFRCR<<index]); | |
4585 | */ | |
4586 | return chip_number; | |
4587 | } | |
4588 | cy_writeb(base_addr + (CyGCR << index), CyCH0_SERIAL); | |
db05c3b1 | 4589 | if (readb(base_addr + (CyGFRCR << index)) >= CD1400_REV_J) { |
02f1175c JS |
4590 | /* It is a CD1400 rev. J or later */ |
4591 | /* Impossible to reach 5ms with this chip. | |
4592 | Changed to 2ms instead (f = 500 Hz). */ | |
4593 | cy_writeb(base_addr + (CyPPR << index), CyCLOCK_60_2MS); | |
4594 | } else { | |
4595 | /* f = 200 Hz */ | |
4596 | cy_writeb(base_addr + (CyPPR << index), CyCLOCK_25_5MS); | |
4597 | } | |
1da177e4 | 4598 | |
02f1175c JS |
4599 | /* |
4600 | printk(" chip #%d at %#6lx is rev 0x%2x\n", | |
4601 | chip_number, (unsigned long)base_addr, | |
db05c3b1 | 4602 | readb(base_addr+(CyGFRCR<<index))); |
02f1175c JS |
4603 | */ |
4604 | } | |
4605 | return chip_number; | |
4606 | } /* cyy_init_card */ | |
1da177e4 LT |
4607 | |
4608 | /* | |
4609 | * --------------------------------------------------------------------- | |
4610 | * cy_detect_isa() - Probe for Cyclom-Y/ISA boards. | |
4611 | * sets global variables and return the number of ISA boards found. | |
4612 | * --------------------------------------------------------------------- | |
4613 | */ | |
02f1175c | 4614 | static int __init cy_detect_isa(void) |
1da177e4 LT |
4615 | { |
4616 | #ifdef CONFIG_ISA | |
02f1175c JS |
4617 | unsigned short cy_isa_irq, nboard; |
4618 | void __iomem *cy_isa_address; | |
4619 | unsigned short i, j, cy_isa_nchan; | |
1da177e4 | 4620 | #ifdef MODULE |
02f1175c | 4621 | int isparam = 0; |
1da177e4 LT |
4622 | #endif |
4623 | ||
02f1175c | 4624 | nboard = 0; |
1da177e4 LT |
4625 | |
4626 | #ifdef MODULE | |
4627 | /* Check for module parameters */ | |
02f1175c JS |
4628 | for (i = 0; i < NR_CARDS; i++) { |
4629 | if (maddr[i] || i) { | |
4630 | isparam = 1; | |
4631 | cy_isa_addresses[i] = maddr[i]; | |
4632 | } | |
4633 | if (!maddr[i]) | |
4634 | break; | |
1da177e4 LT |
4635 | } |
4636 | #endif | |
4637 | ||
02f1175c JS |
4638 | /* scan the address table probing for Cyclom-Y/ISA boards */ |
4639 | for (i = 0; i < NR_ISA_ADDRS; i++) { | |
4640 | unsigned int isa_address = cy_isa_addresses[i]; | |
4641 | if (isa_address == 0x0000) { | |
096dcfce | 4642 | return nboard; |
02f1175c | 4643 | } |
1da177e4 | 4644 | |
02f1175c | 4645 | /* probe for CD1400... */ |
1da177e4 | 4646 | cy_isa_address = ioremap(isa_address, CyISA_Ywin); |
3137553d JS |
4647 | if (cy_isa_address == NULL) { |
4648 | printk(KERN_ERR "Cyclom-Y/ISA: can't remap base " | |
4649 | "address\n"); | |
4650 | continue; | |
4651 | } | |
02f1175c JS |
4652 | cy_isa_nchan = CyPORTS_PER_CHIP * |
4653 | cyy_init_card(cy_isa_address, 0); | |
4654 | if (cy_isa_nchan == 0) { | |
3137553d | 4655 | iounmap(cy_isa_address); |
02f1175c JS |
4656 | continue; |
4657 | } | |
1da177e4 LT |
4658 | #ifdef MODULE |
4659 | if (isparam && irq[i]) | |
02f1175c | 4660 | cy_isa_irq = irq[i]; |
1da177e4 LT |
4661 | else |
4662 | #endif | |
02f1175c JS |
4663 | /* find out the board's irq by probing */ |
4664 | cy_isa_irq = detect_isa_irq(cy_isa_address); | |
4665 | if (cy_isa_irq == 0) { | |
21719191 JS |
4666 | printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but the " |
4667 | "IRQ could not be detected.\n", | |
02f1175c | 4668 | (unsigned long)cy_isa_address); |
3137553d | 4669 | iounmap(cy_isa_address); |
02f1175c JS |
4670 | continue; |
4671 | } | |
4672 | ||
4673 | if ((cy_next_channel + cy_isa_nchan) > NR_PORTS) { | |
21719191 JS |
4674 | printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no " |
4675 | "more channels are available. Change NR_PORTS " | |
4676 | "in cyclades.c and recompile kernel.\n", | |
02f1175c | 4677 | (unsigned long)cy_isa_address); |
3137553d | 4678 | iounmap(cy_isa_address); |
096dcfce | 4679 | return nboard; |
02f1175c JS |
4680 | } |
4681 | /* fill the next cy_card structure available */ | |
4682 | for (j = 0; j < NR_CARDS; j++) { | |
f7429034 | 4683 | if (cy_card[j].base_addr == NULL) |
02f1175c JS |
4684 | break; |
4685 | } | |
4686 | if (j == NR_CARDS) { /* no more cy_cards available */ | |
21719191 JS |
4687 | printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no " |
4688 | "more cards can be used. Change NR_CARDS in " | |
4689 | "cyclades.c and recompile kernel.\n", | |
02f1175c | 4690 | (unsigned long)cy_isa_address); |
3137553d | 4691 | iounmap(cy_isa_address); |
096dcfce | 4692 | return nboard; |
02f1175c JS |
4693 | } |
4694 | ||
4695 | /* allocate IRQ */ | |
4696 | if (request_irq(cy_isa_irq, cyy_interrupt, | |
4697 | IRQF_DISABLED, "Cyclom-Y", &cy_card[j])) { | |
21719191 JS |
4698 | printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but " |
4699 | "could not allocate IRQ#%d.\n", | |
4700 | (unsigned long)cy_isa_address, cy_isa_irq); | |
3137553d | 4701 | iounmap(cy_isa_address); |
096dcfce | 4702 | return nboard; |
02f1175c JS |
4703 | } |
4704 | ||
4705 | /* set cy_card */ | |
4706 | cy_card[j].base_addr = cy_isa_address; | |
4707 | cy_card[j].ctl_addr = NULL; | |
4708 | cy_card[j].irq = (int)cy_isa_irq; | |
4709 | cy_card[j].bus_index = 0; | |
4710 | cy_card[j].first_line = cy_next_channel; | |
4711 | cy_card[j].num_chips = cy_isa_nchan / 4; | |
3137553d JS |
4712 | if (cy_init_card(&cy_card[j])) { |
4713 | cy_card[j].base_addr = NULL; | |
4714 | free_irq(cy_isa_irq, &cy_card[j]); | |
4715 | iounmap(cy_isa_address); | |
4716 | continue; | |
4717 | } | |
02f1175c JS |
4718 | nboard++; |
4719 | ||
21719191 JS |
4720 | printk(KERN_INFO "Cyclom-Y/ISA #%d: 0x%lx-0x%lx, IRQ%d found: " |
4721 | "%d channels starting from port %d\n", | |
02f1175c JS |
4722 | j + 1, (unsigned long)cy_isa_address, |
4723 | (unsigned long)(cy_isa_address + (CyISA_Ywin - 1)), | |
21719191 JS |
4724 | cy_isa_irq, cy_isa_nchan, cy_next_channel); |
4725 | ||
6ad1ccc1 JS |
4726 | for (j = cy_next_channel; |
4727 | j < cy_next_channel + cy_isa_nchan; j++) | |
4728 | tty_register_device(cy_serial_driver, j, NULL); | |
02f1175c JS |
4729 | cy_next_channel += cy_isa_nchan; |
4730 | } | |
096dcfce | 4731 | return nboard; |
1da177e4 | 4732 | #else |
096dcfce | 4733 | return 0; |
02f1175c JS |
4734 | #endif /* CONFIG_ISA */ |
4735 | } /* cy_detect_isa */ | |
1da177e4 | 4736 | |
58936d8d JS |
4737 | #ifdef CONFIG_PCI |
4738 | static void __devinit plx_init(void __iomem * addr, __u32 initctl) | |
1da177e4 | 4739 | { |
02f1175c | 4740 | /* Reset PLX */ |
db05c3b1 | 4741 | cy_writel(addr + initctl, readl(addr + initctl) | 0x40000000); |
02f1175c | 4742 | udelay(100L); |
db05c3b1 | 4743 | cy_writel(addr + initctl, readl(addr + initctl) & ~0x40000000); |
02f1175c JS |
4744 | |
4745 | /* Reload Config. Registers from EEPROM */ | |
db05c3b1 | 4746 | cy_writel(addr + initctl, readl(addr + initctl) | 0x20000000); |
02f1175c | 4747 | udelay(100L); |
db05c3b1 | 4748 | cy_writel(addr + initctl, readl(addr + initctl) & ~0x20000000); |
1da177e4 LT |
4749 | } |
4750 | ||
58936d8d JS |
4751 | static int __devinit cy_pci_probe(struct pci_dev *pdev, |
4752 | const struct pci_device_id *ent) | |
1da177e4 | 4753 | { |
3137553d JS |
4754 | void __iomem *addr0 = NULL, *addr2 = NULL; |
4755 | char *card_name = NULL; | |
4756 | u32 mailbox; | |
4757 | unsigned int device_id, nchan = 0, card_no, i; | |
4758 | unsigned char plx_ver; | |
4759 | int retval, irq; | |
02f1175c | 4760 | |
58936d8d JS |
4761 | retval = pci_enable_device(pdev); |
4762 | if (retval) { | |
4763 | dev_err(&pdev->dev, "cannot enable device\n"); | |
3137553d | 4764 | goto err; |
58936d8d | 4765 | } |
1da177e4 | 4766 | |
58936d8d | 4767 | /* read PCI configuration area */ |
3137553d | 4768 | irq = pdev->irq; |
58936d8d | 4769 | device_id = pdev->device & ~PCI_DEVICE_ID_MASK; |
1da177e4 | 4770 | |
3137553d JS |
4771 | #if defined(__alpha__) |
4772 | if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo) { /* below 1M? */ | |
4773 | dev_err(&pdev->dev, "Cyclom-Y/PCI not supported for low " | |
4774 | "addresses on Alpha systems.\n"); | |
4775 | retval = -EIO; | |
4776 | goto err_dis; | |
4777 | } | |
4778 | #endif | |
4779 | if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Lo) { | |
4780 | dev_err(&pdev->dev, "Cyclades-Z/PCI not supported for low " | |
4781 | "addresses\n"); | |
4782 | retval = -EIO; | |
4783 | goto err_dis; | |
4784 | } | |
4785 | ||
4786 | if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) { | |
4787 | dev_warn(&pdev->dev, "PCI I/O bit incorrectly set. Ignoring " | |
4788 | "it...\n"); | |
4789 | pdev->resource[2].flags &= ~IORESOURCE_IO; | |
4790 | } | |
4791 | ||
4792 | retval = pci_request_regions(pdev, "cyclades"); | |
4793 | if (retval) { | |
4794 | dev_err(&pdev->dev, "failed to reserve resources\n"); | |
4795 | goto err_dis; | |
4796 | } | |
4797 | ||
4798 | retval = -EIO; | |
58936d8d JS |
4799 | if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || |
4800 | device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { | |
3137553d | 4801 | card_name = "Cyclom-Y"; |
1da177e4 | 4802 | |
3137553d JS |
4803 | addr0 = pci_iomap(pdev, 0, CyPCI_Yctl); |
4804 | if (addr0 == NULL) { | |
4805 | dev_err(&pdev->dev, "can't remap ctl region\n"); | |
4806 | goto err_reg; | |
58936d8d | 4807 | } |
3137553d JS |
4808 | addr2 = pci_iomap(pdev, 2, CyPCI_Ywin); |
4809 | if (addr2 == NULL) { | |
4810 | dev_err(&pdev->dev, "can't remap base region\n"); | |
4811 | goto err_unmap; | |
58936d8d | 4812 | } |
1da177e4 | 4813 | |
3137553d JS |
4814 | nchan = CyPORTS_PER_CHIP * cyy_init_card(addr2, 1); |
4815 | if (nchan == 0) { | |
21719191 JS |
4816 | dev_err(&pdev->dev, "Cyclom-Y PCI host card with no " |
4817 | "Serial-Modules\n"); | |
58936d8d JS |
4818 | return -EIO; |
4819 | } | |
58936d8d | 4820 | } else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi) { |
3137553d | 4821 | struct RUNTIME_9060 __iomem *ctl_addr; |
21719191 | 4822 | |
3137553d JS |
4823 | ctl_addr = addr0 = pci_iomap(pdev, 0, CyPCI_Zctl); |
4824 | if (addr0 == NULL) { | |
4825 | dev_err(&pdev->dev, "can't remap ctl region\n"); | |
4826 | goto err_reg; | |
4827 | } | |
58936d8d JS |
4828 | |
4829 | /* Disable interrupts on the PLX before resetting it */ | |
3137553d JS |
4830 | cy_writew(addr0 + 0x68, |
4831 | readw(addr0 + 0x68) & ~0x0900); | |
58936d8d | 4832 | |
3137553d | 4833 | plx_init(addr0, 0x6c); |
58936d8d JS |
4834 | /* For some yet unknown reason, once the PLX9060 reloads |
4835 | the EEPROM, the IRQ is lost and, thus, we have to | |
4836 | re-write it to the PCI config. registers. | |
4837 | This will remain here until we find a permanent | |
4838 | fix. */ | |
3137553d | 4839 | pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, irq); |
02f1175c | 4840 | |
3137553d | 4841 | mailbox = (u32)readl(&ctl_addr->mail_box_0); |
58936d8d | 4842 | |
3137553d JS |
4843 | addr2 = pci_iomap(pdev, 2, mailbox == ZE_V1 ? |
4844 | CyPCI_Ze_win : CyPCI_Zwin); | |
4845 | if (addr2 == NULL) { | |
4846 | dev_err(&pdev->dev, "can't remap base region\n"); | |
4847 | goto err_unmap; | |
58936d8d JS |
4848 | } |
4849 | ||
4850 | if (mailbox == ZE_V1) { | |
3137553d JS |
4851 | card_name = "Cyclades-Ze"; |
4852 | ||
4853 | readl(&ctl_addr->mail_box_0); | |
4854 | nchan = ZE_V1_NPORTS; | |
58936d8d | 4855 | } else { |
3137553d | 4856 | card_name = "Cyclades-8Zo"; |
1da177e4 LT |
4857 | |
4858 | #ifdef CY_PCI_DEBUG | |
3137553d JS |
4859 | if (mailbox == ZO_V1) { |
4860 | cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); | |
4861 | dev_info(&pdev->dev, "Cyclades-8Zo/PCI: FPGA " | |
4862 | "id %lx, ver %lx\n", (ulong)(0xff & | |
4863 | readl(&((struct CUSTOM_REG *)addr2)-> | |
4864 | fpga_id)), (ulong)(0xff & | |
4865 | readl(&((struct CUSTOM_REG *)addr2)-> | |
4866 | fpga_version))); | |
4867 | cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); | |
4868 | } else { | |
4869 | dev_info(&pdev->dev, "Cyclades-Z/PCI: New " | |
4870 | "Cyclades-Z board. FPGA not loaded\n"); | |
4871 | } | |
1da177e4 | 4872 | #endif |
3137553d JS |
4873 | /* The following clears the firmware id word. This |
4874 | ensures that the driver will not attempt to talk to | |
4875 | the board until it has been properly initialized. | |
4876 | */ | |
4877 | if ((mailbox == ZO_V1) || (mailbox == ZO_V2)) | |
4878 | cy_writel(addr2 + ID_ADDRESS, 0L); | |
1da177e4 | 4879 | |
3137553d JS |
4880 | /* This must be a Cyclades-8Zo/PCI. The extendable |
4881 | version will have a different device_id and will | |
4882 | be allocated its maximum number of ports. */ | |
4883 | nchan = 8; | |
58936d8d | 4884 | } |
3137553d JS |
4885 | } |
4886 | ||
4887 | if ((cy_next_channel + nchan) > NR_PORTS) { | |
4888 | dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no " | |
4889 | "channels are available. Change NR_PORTS in " | |
4890 | "cyclades.c and recompile kernel.\n"); | |
4891 | goto err_unmap; | |
4892 | } | |
4893 | /* fill the next cy_card structure available */ | |
4894 | for (card_no = 0; card_no < NR_CARDS; card_no++) { | |
4895 | if (cy_card[card_no].base_addr == NULL) | |
4896 | break; | |
4897 | } | |
4898 | if (card_no == NR_CARDS) { /* no more cy_cards available */ | |
4899 | dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no " | |
4900 | "more cards can be used. Change NR_CARDS in " | |
4901 | "cyclades.c and recompile kernel.\n"); | |
4902 | goto err_unmap; | |
4903 | } | |
4904 | ||
4905 | if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || | |
4906 | device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { | |
4907 | /* allocate IRQ */ | |
4908 | retval = request_irq(irq, cyy_interrupt, | |
4909 | IRQF_SHARED, "Cyclom-Y", &cy_card[card_no]); | |
4910 | if (retval) { | |
4911 | dev_err(&pdev->dev, "could not allocate IRQ\n"); | |
4912 | goto err_unmap; | |
58936d8d | 4913 | } |
3137553d JS |
4914 | cy_card[card_no].num_chips = nchan / 4; |
4915 | } else { | |
02f1175c | 4916 | #ifdef CONFIG_CYZ_INTR |
58936d8d | 4917 | /* allocate IRQ only if board has an IRQ */ |
3137553d JS |
4918 | if (irq != 0 && irq != 255) { |
4919 | retval = request_irq(irq, cyz_interrupt, | |
58936d8d | 4920 | IRQF_SHARED, "Cyclades-Z", |
3137553d | 4921 | &cy_card[card_no]); |
58936d8d | 4922 | if (retval) { |
21719191 | 4923 | dev_err(&pdev->dev, "could not allocate IRQ\n"); |
3137553d | 4924 | goto err_unmap; |
02f1175c | 4925 | } |
58936d8d | 4926 | } |
02f1175c | 4927 | #endif /* CONFIG_CYZ_INTR */ |
3137553d JS |
4928 | cy_card[card_no].num_chips = -1; |
4929 | } | |
02f1175c | 4930 | |
3137553d JS |
4931 | /* set cy_card */ |
4932 | cy_card[card_no].base_addr = addr2; | |
4933 | cy_card[card_no].ctl_addr = addr0; | |
4934 | cy_card[card_no].irq = irq; | |
4935 | cy_card[card_no].bus_index = 1; | |
4936 | cy_card[card_no].first_line = cy_next_channel; | |
4937 | retval = cy_init_card(&cy_card[card_no]); | |
4938 | if (retval) | |
4939 | goto err_null; | |
58936d8d | 4940 | |
3137553d | 4941 | pci_set_drvdata(pdev, &cy_card[card_no]); |
58936d8d | 4942 | |
3137553d JS |
4943 | if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || |
4944 | device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { | |
4945 | /* enable interrupts in the PCI interface */ | |
4946 | plx_ver = readb(addr2 + CyPLX_VER) & 0x0f; | |
4947 | switch (plx_ver) { | |
4948 | case PLX_9050: | |
4949 | ||
4950 | cy_writeb(addr0 + 0x4c, 0x43); | |
4951 | break; | |
4952 | ||
4953 | case PLX_9060: | |
4954 | case PLX_9080: | |
4955 | default: /* Old boards, use PLX_9060 */ | |
4956 | ||
4957 | plx_init(addr0, 0x6c); | |
4958 | /* For some yet unknown reason, once the PLX9060 reloads | |
4959 | the EEPROM, the IRQ is lost and, thus, we have to | |
4960 | re-write it to the PCI config. registers. | |
4961 | This will remain here until we find a permanent | |
4962 | fix. */ | |
4963 | pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, irq); | |
4964 | ||
4965 | cy_writew(addr0 + 0x68, readw(addr0 + 0x68) | 0x0900); | |
4966 | break; | |
4967 | } | |
58936d8d JS |
4968 | } |
4969 | ||
3137553d JS |
4970 | dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from " |
4971 | "port %d.\n", card_name, card_no + 1, nchan, cy_next_channel); | |
4972 | for (i = cy_next_channel; i < cy_next_channel + nchan; i++) | |
4973 | tty_register_device(cy_serial_driver, i, &pdev->dev); | |
4974 | cy_next_channel += nchan; | |
4975 | ||
58936d8d | 4976 | return 0; |
3137553d JS |
4977 | err_null: |
4978 | cy_card[card_no].base_addr = NULL; | |
4979 | free_irq(irq, &cy_card[card_no]); | |
4980 | err_unmap: | |
4981 | pci_iounmap(pdev, addr0); | |
4982 | if (addr2) | |
4983 | pci_iounmap(pdev, addr2); | |
4984 | err_reg: | |
4985 | pci_release_regions(pdev); | |
4986 | err_dis: | |
4987 | pci_disable_device(pdev); | |
4988 | err: | |
4989 | return retval; | |
58936d8d | 4990 | } |
58936d8d | 4991 | |
6747cd93 | 4992 | static void __devexit cy_pci_remove(struct pci_dev *pdev) |
58936d8d | 4993 | { |
38d09093 | 4994 | struct cyclades_card *cinfo = pci_get_drvdata(pdev); |
f3851e73 | 4995 | unsigned int i; |
38d09093 | 4996 | |
85c93fa9 | 4997 | /* non-Z with old PLX */ |
c2ad4c75 JS |
4998 | if (!IS_CYC_Z(*cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) == |
4999 | PLX_9050) | |
85c93fa9 JS |
5000 | cy_writeb(cinfo->ctl_addr + 0x4c, 0); |
5001 | else | |
5002 | #ifndef CONFIG_CYZ_INTR | |
c2ad4c75 | 5003 | if (!IS_CYC_Z(*cinfo)) |
85c93fa9 JS |
5004 | #endif |
5005 | cy_writew(cinfo->ctl_addr + 0x68, | |
5006 | readw(cinfo->ctl_addr + 0x68) & ~0x0900); | |
5007 | ||
38d09093 JS |
5008 | pci_iounmap(pdev, cinfo->base_addr); |
5009 | if (cinfo->ctl_addr) | |
5010 | pci_iounmap(pdev, cinfo->ctl_addr); | |
5011 | if (cinfo->irq | |
5012 | #ifndef CONFIG_CYZ_INTR | |
c2ad4c75 | 5013 | && !IS_CYC_Z(*cinfo) |
38d09093 JS |
5014 | #endif /* CONFIG_CYZ_INTR */ |
5015 | ) | |
5016 | free_irq(cinfo->irq, cinfo); | |
5017 | pci_release_regions(pdev); | |
5018 | ||
5019 | cinfo->base_addr = NULL; | |
6ad1ccc1 JS |
5020 | for (i = cinfo->first_line; i < cinfo->first_line + |
5021 | cinfo->nports; i++) | |
5022 | tty_unregister_device(cy_serial_driver, i); | |
dd025c0c JS |
5023 | cinfo->nports = 0; |
5024 | kfree(cinfo->ports); | |
38d09093 JS |
5025 | } |
5026 | ||
6747cd93 JS |
5027 | static struct pci_driver cy_pci_driver = { |
5028 | .name = "cyclades", | |
5029 | .id_table = cy_pci_dev_id, | |
5030 | .probe = cy_pci_probe, | |
5031 | .remove = __devexit_p(cy_pci_remove) | |
5032 | }; | |
5033 | #endif | |
5034 | ||
02f1175c | 5035 | static int |
1da177e4 | 5036 | cyclades_get_proc_info(char *buf, char **start, off_t offset, int length, |
02f1175c | 5037 | int *eof, void *data) |
1da177e4 | 5038 | { |
02f1175c | 5039 | struct cyclades_port *info; |
dd025c0c | 5040 | unsigned int i, j; |
02f1175c JS |
5041 | int len = 0; |
5042 | off_t begin = 0; | |
5043 | off_t pos = 0; | |
5044 | int size; | |
5045 | __u32 cur_jifs = jiffies; | |
5046 | ||
5047 | size = sprintf(buf, "Dev TimeOpen BytesOut IdleOut BytesIn " | |
5048 | "IdleIn Overruns Ldisc\n"); | |
5049 | ||
5050 | pos += size; | |
1da177e4 | 5051 | len += size; |
1da177e4 | 5052 | |
02f1175c | 5053 | /* Output one line for each known port */ |
dd025c0c JS |
5054 | for (i = 0; i < NR_CARDS; i++) |
5055 | for (j = 0; j < cy_card[i].nports; j++) { | |
5056 | info = &cy_card[i].ports[j]; | |
5057 | ||
5058 | if (info->count) | |
5059 | size = sprintf(buf + len, "%3d %8lu %10lu %8lu " | |
5060 | "%10lu %8lu %9lu %6ld\n", info->line, | |
5061 | (cur_jifs - info->idle_stats.in_use) / | |
5062 | HZ, info->idle_stats.xmit_bytes, | |
5063 | (cur_jifs - info->idle_stats.xmit_idle)/ | |
5064 | HZ, info->idle_stats.recv_bytes, | |
5065 | (cur_jifs - info->idle_stats.recv_idle)/ | |
5066 | HZ, info->idle_stats.overruns, | |
5067 | (long)info->tty->ldisc.num); | |
5068 | else | |
5069 | size = sprintf(buf + len, "%3d %8lu %10lu %8lu " | |
5070 | "%10lu %8lu %9lu %6ld\n", | |
5071 | info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L); | |
5072 | len += size; | |
5073 | pos = begin + len; | |
5074 | ||
5075 | if (pos < offset) { | |
5076 | len = 0; | |
5077 | begin = pos; | |
5078 | } | |
5079 | if (pos > offset + length) | |
5080 | goto done; | |
02f1175c | 5081 | } |
02f1175c | 5082 | *eof = 1; |
1da177e4 | 5083 | done: |
02f1175c JS |
5084 | *start = buf + (offset - begin); /* Start of wanted data */ |
5085 | len -= (offset - begin); /* Start slop */ | |
5086 | if (len > length) | |
5087 | len = length; /* Ending slop */ | |
5088 | if (len < 0) | |
5089 | len = 0; | |
5090 | return len; | |
1da177e4 LT |
5091 | } |
5092 | ||
5093 | /* The serial driver boot-time initialization code! | |
5094 | Hardware I/O ports are mapped to character special devices on a | |
5095 | first found, first allocated manner. That is, this code searches | |
5096 | for Cyclom cards in the system. As each is found, it is probed | |
5097 | to discover how many chips (and thus how many ports) are present. | |
5098 | These ports are mapped to the tty ports 32 and upward in monotonic | |
5099 | fashion. If an 8-port card is replaced with a 16-port card, the | |
5100 | port mapping on a following card will shift. | |
5101 | ||
5102 | This approach is different from what is used in the other serial | |
5103 | device driver because the Cyclom is more properly a multiplexer, | |
5104 | not just an aggregation of serial ports on one card. | |
5105 | ||
5106 | If there are more cards with more ports than have been | |
5107 | statically allocated above, a warning is printed and the | |
5108 | extra ports are ignored. | |
5109 | */ | |
5110 | ||
b68e31d0 | 5111 | static const struct tty_operations cy_ops = { |
02f1175c JS |
5112 | .open = cy_open, |
5113 | .close = cy_close, | |
5114 | .write = cy_write, | |
5115 | .put_char = cy_put_char, | |
5116 | .flush_chars = cy_flush_chars, | |
5117 | .write_room = cy_write_room, | |
5118 | .chars_in_buffer = cy_chars_in_buffer, | |
5119 | .flush_buffer = cy_flush_buffer, | |
5120 | .ioctl = cy_ioctl, | |
5121 | .throttle = cy_throttle, | |
5122 | .unthrottle = cy_unthrottle, | |
5123 | .set_termios = cy_set_termios, | |
5124 | .stop = cy_stop, | |
5125 | .start = cy_start, | |
5126 | .hangup = cy_hangup, | |
5127 | .break_ctl = cy_break, | |
5128 | .wait_until_sent = cy_wait_until_sent, | |
5129 | .read_proc = cyclades_get_proc_info, | |
5130 | .tiocmget = cy_tiocmget, | |
5131 | .tiocmset = cy_tiocmset, | |
1da177e4 LT |
5132 | }; |
5133 | ||
02f1175c | 5134 | static int __init cy_init(void) |
1da177e4 | 5135 | { |
dd025c0c | 5136 | unsigned int nboards; |
9dacf3b2 | 5137 | int retval = -ENOMEM; |
02f1175c JS |
5138 | |
5139 | cy_serial_driver = alloc_tty_driver(NR_PORTS); | |
5140 | if (!cy_serial_driver) | |
9dacf3b2 | 5141 | goto err; |
21719191 JS |
5142 | |
5143 | printk(KERN_INFO "Cyclades driver " CY_VERSION " (built %s %s)\n", | |
5144 | __DATE__, __TIME__); | |
02f1175c JS |
5145 | |
5146 | /* Initialize the tty_driver structure */ | |
5147 | ||
5148 | cy_serial_driver->owner = THIS_MODULE; | |
5149 | cy_serial_driver->driver_name = "cyclades"; | |
5150 | cy_serial_driver->name = "ttyC"; | |
5151 | cy_serial_driver->major = CYCLADES_MAJOR; | |
5152 | cy_serial_driver->minor_start = 0; | |
5153 | cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL; | |
5154 | cy_serial_driver->subtype = SERIAL_TYPE_NORMAL; | |
5155 | cy_serial_driver->init_termios = tty_std_termios; | |
5156 | cy_serial_driver->init_termios.c_cflag = | |
5157 | B9600 | CS8 | CREAD | HUPCL | CLOCAL; | |
6ad1ccc1 | 5158 | cy_serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; |
02f1175c JS |
5159 | tty_set_operations(cy_serial_driver, &cy_ops); |
5160 | ||
9dacf3b2 JS |
5161 | retval = tty_register_driver(cy_serial_driver); |
5162 | if (retval) { | |
5163 | printk(KERN_ERR "Couldn't register Cyclades serial driver\n"); | |
5164 | goto err_frtty; | |
5165 | } | |
02f1175c | 5166 | |
02f1175c JS |
5167 | /* the code below is responsible to find the boards. Each different |
5168 | type of board has its own detection routine. If a board is found, | |
5169 | the next cy_card structure available is set by the detection | |
5170 | routine. These functions are responsible for checking the | |
5171 | availability of cy_card and cy_port data structures and updating | |
5172 | the cy_next_channel. */ | |
5173 | ||
5174 | /* look for isa boards */ | |
14a55a67 | 5175 | nboards = cy_detect_isa(); |
02f1175c | 5176 | |
6747cd93 | 5177 | #ifdef CONFIG_PCI |
02f1175c | 5178 | /* look for pci boards */ |
6747cd93 JS |
5179 | retval = pci_register_driver(&cy_pci_driver); |
5180 | if (retval && !nboards) | |
9dacf3b2 | 5181 | goto err_unr; |
6747cd93 | 5182 | #endif |
9dacf3b2 JS |
5183 | |
5184 | return 0; | |
5185 | err_unr: | |
5186 | tty_unregister_driver(cy_serial_driver); | |
5187 | err_frtty: | |
5188 | put_tty_driver(cy_serial_driver); | |
5189 | err: | |
5190 | return retval; | |
02f1175c | 5191 | } /* cy_init */ |
1da177e4 | 5192 | |
02f1175c | 5193 | static void __exit cy_cleanup_module(void) |
1da177e4 | 5194 | { |
dd025c0c | 5195 | struct cyclades_card *card; |
02f1175c | 5196 | int i, e1; |
1da177e4 LT |
5197 | |
5198 | #ifndef CONFIG_CYZ_INTR | |
b7050906 | 5199 | del_timer_sync(&cyz_timerlist); |
1da177e4 LT |
5200 | #endif /* CONFIG_CYZ_INTR */ |
5201 | ||
02f1175c | 5202 | if ((e1 = tty_unregister_driver(cy_serial_driver))) |
21719191 JS |
5203 | printk(KERN_ERR "failed to unregister Cyclades serial " |
5204 | "driver(%d)\n", e1); | |
1da177e4 | 5205 | |
6747cd93 JS |
5206 | #ifdef CONFIG_PCI |
5207 | pci_unregister_driver(&cy_pci_driver); | |
5208 | #endif | |
5209 | ||
02f1175c | 5210 | for (i = 0; i < NR_CARDS; i++) { |
dd025c0c JS |
5211 | card = &cy_card[i]; |
5212 | if (card->base_addr) { | |
85c93fa9 | 5213 | /* clear interrupt */ |
dd025c0c JS |
5214 | cy_writeb(card->base_addr + Cy_ClrIntr, 0); |
5215 | iounmap(card->base_addr); | |
5216 | if (card->ctl_addr) | |
5217 | iounmap(card->ctl_addr); | |
5218 | if (card->irq | |
1da177e4 | 5219 | #ifndef CONFIG_CYZ_INTR |
dd025c0c | 5220 | && !IS_CYC_Z(*card) |
1da177e4 | 5221 | #endif /* CONFIG_CYZ_INTR */ |
02f1175c | 5222 | ) |
dd025c0c JS |
5223 | free_irq(card->irq, card); |
5224 | for (e1 = card->first_line; | |
5225 | e1 < card->first_line + | |
5226 | card->nports; e1++) | |
6ad1ccc1 | 5227 | tty_unregister_device(cy_serial_driver, e1); |
dd025c0c | 5228 | kfree(card->ports); |
02f1175c JS |
5229 | } |
5230 | } | |
f2462bfe JS |
5231 | |
5232 | put_tty_driver(cy_serial_driver); | |
1da177e4 LT |
5233 | } /* cy_cleanup_module */ |
5234 | ||
5235 | module_init(cy_init); | |
5236 | module_exit(cy_cleanup_module); | |
5237 | ||
5238 | MODULE_LICENSE("GPL"); | |
c8e1693a | 5239 | MODULE_VERSION(CY_VERSION); |