Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | #undef BLOCKMOVE |
2 | #define Z_WAKE | |
3 | #undef Z_EXT_CHARS_IN_BUFFER | |
1da177e4 LT |
4 | |
5 | /* | |
6 | * linux/drivers/char/cyclades.c | |
7 | * | |
8 | * This file contains the driver for the Cyclades async multiport | |
9 | * serial boards. | |
10 | * | |
11 | * Initially written by Randolph Bentson <bentson@grieg.seaslug.org>. | |
12 | * Modified and maintained by Marcio Saito <marcio@cyclades.com>. | |
1da177e4 | 13 | * |
c8e1693a | 14 | * Copyright (C) 2007 Jiri Slaby <jirislaby@gmail.com> |
1da177e4 LT |
15 | * |
16 | * Much of the design and some of the code came from serial.c | |
17 | * which was copyright (C) 1991, 1992 Linus Torvalds. It was | |
18 | * extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92, | |
19 | * and then fixed as suggested by Michael K. Johnson 12/12/92. | |
c8e1693a | 20 | * Converted to pci probing and cleaned up by Jiri Slaby. |
1da177e4 LT |
21 | * |
22 | * This version supports shared IRQ's (only for PCI boards). | |
23 | * | |
24 | * $Log: cyclades.c,v $ | |
25 | * Prevent users from opening non-existing Z ports. | |
26 | * | |
27 | * Revision 2.3.2.8 2000/07/06 18:14:16 ivan | |
28 | * Fixed the PCI detection function to work properly on Alpha systems. | |
29 | * Implemented support for TIOCSERGETLSR ioctl. | |
30 | * Implemented full support for non-standard baud rates. | |
31 | * | |
32 | * Revision 2.3.2.7 2000/06/01 18:26:34 ivan | |
33 | * Request PLX I/O region, although driver doesn't use it, to avoid | |
34 | * problems with other drivers accessing it. | |
35 | * Removed count for on-board buffer characters in cy_chars_in_buffer | |
36 | * (Cyclades-Z only). | |
37 | * | |
38 | * Revision 2.3.2.6 2000/05/05 13:56:05 ivan | |
39 | * Driver now reports physical instead of virtual memory addresses. | |
40 | * Masks were added to some Cyclades-Z read accesses. | |
41 | * Implemented workaround for PLX9050 bug that would cause a system lockup | |
42 | * in certain systems, depending on the MMIO addresses allocated to the | |
43 | * board. | |
44 | * Changed the Tx interrupt programming in the CD1400 chips to boost up | |
45 | * performance (Cyclom-Y only). | |
46 | * Code is now compliant with the new module interface (module_[init|exit]). | |
47 | * Make use of the PCI helper functions to access PCI resources. | |
48 | * Did some code "housekeeping". | |
49 | * | |
50 | * Revision 2.3.2.5 2000/01/19 14:35:33 ivan | |
51 | * Fixed bug in cy_set_termios on CRTSCTS flag turnoff. | |
52 | * | |
53 | * Revision 2.3.2.4 2000/01/17 09:19:40 ivan | |
54 | * Fixed SMP locking in Cyclom-Y interrupt handler. | |
55 | * | |
56 | * Revision 2.3.2.3 1999/12/28 12:11:39 ivan | |
57 | * Added a new cyclades_card field called nports to allow the driver to | |
58 | * know the exact number of ports found by the Z firmware after its load; | |
59 | * RX buffer contention prevention logic on interrupt op mode revisited | |
60 | * (Cyclades-Z only); | |
61 | * Revisited printk's for Z debug; | |
62 | * Driver now makes sure that the constant SERIAL_XMIT_SIZE is defined; | |
63 | * | |
64 | * Revision 2.3.2.2 1999/10/01 11:27:43 ivan | |
65 | * Fixed bug in cyz_poll that would make all ports but port 0 | |
66 | * unable to transmit/receive data (Cyclades-Z only); | |
67 | * Implemented logic to prevent the RX buffer from being stuck with data | |
68 | * due to a driver / firmware race condition in interrupt op mode | |
69 | * (Cyclades-Z only); | |
70 | * Fixed bug in block_til_ready logic that would lead to a system crash; | |
71 | * Revisited cy_close spinlock usage; | |
72 | * | |
73 | * Revision 2.3.2.1 1999/09/28 11:01:22 ivan | |
74 | * Revisited CONFIG_PCI conditional compilation for PCI board support; | |
75 | * Implemented TIOCGICOUNT and TIOCMIWAIT ioctl support; | |
76 | * _Major_ cleanup on the Cyclades-Z interrupt support code / logic; | |
77 | * Removed CTS handling from the driver -- this is now completely handled | |
78 | * by the firmware (Cyclades-Z only); | |
79 | * Flush RX on-board buffers on a port open (Cyclades-Z only); | |
80 | * Fixed handling of ASYNC_SPD_* TTY flags; | |
81 | * Module unload now unmaps all memory area allocated by ioremap; | |
82 | * | |
83 | * Revision 2.3.1.1 1999/07/15 16:45:53 ivan | |
84 | * Removed CY_PROC conditional compilation; | |
85 | * Implemented SMP-awareness for the driver; | |
86 | * Implemented a new ISA IRQ autoprobe that uses the irq_probe_[on|off] | |
87 | * functions; | |
88 | * The driver now accepts memory addresses (maddr=0xMMMMM) and IRQs | |
89 | * (irq=NN) as parameters (only for ISA boards); | |
90 | * Fixed bug in set_line_char that would prevent the Cyclades-Z | |
91 | * ports from being configured at speeds above 115.2Kbps; | |
92 | * Fixed bug in cy_set_termios that would prevent XON/XOFF flow control | |
93 | * switching from working properly; | |
94 | * The driver now only prints IRQ info for the Cyclades-Z if it's | |
95 | * configured to work in interrupt mode; | |
96 | * | |
97 | * Revision 2.2.2.3 1999/06/28 11:13:29 ivan | |
98 | * Added support for interrupt mode operation for the Z cards; | |
99 | * Removed the driver inactivity control for the Z; | |
100 | * Added a missing MOD_DEC_USE_COUNT in the cy_open function for when | |
101 | * the Z firmware is not loaded yet; | |
102 | * Replaced the "manual" Z Tx flush buffer by a call to a FW command of | |
103 | * same functionality; | |
104 | * Implemented workaround for IRQ setting loss on the PCI configuration | |
105 | * registers after a PCI bridge EEPROM reload (affects PLX9060 only); | |
106 | * | |
107 | * Revision 2.2.2.2 1999/05/14 17:18:15 ivan | |
108 | * /proc entry location changed to /proc/tty/driver/cyclades; | |
109 | * Added support to shared IRQ's (only for PCI boards); | |
110 | * Added support for Cobalt Qube2 systems; | |
111 | * IRQ [de]allocation scheme revisited; | |
112 | * BREAK implementation changed in order to make use of the 'break_ctl' | |
113 | * TTY facility; | |
114 | * Fixed typo in TTY structure field 'driver_name'; | |
115 | * Included a PCI bridge reset and EEPROM reload in the board | |
116 | * initialization code (for both Y and Z series). | |
117 | * | |
118 | * Revision 2.2.2.1 1999/04/08 16:17:43 ivan | |
119 | * Fixed a bug in cy_wait_until_sent that was preventing the port to be | |
120 | * closed properly after a SIGINT; | |
121 | * Module usage counter scheme revisited; | |
122 | * Added support to the upcoming Y PCI boards (i.e., support to additional | |
123 | * PCI Device ID's). | |
124 | * | |
125 | * Revision 2.2.1.10 1999/01/20 16:14:29 ivan | |
126 | * Removed all unnecessary page-alignement operations in ioremap calls | |
127 | * (ioremap is currently safe for these operations). | |
128 | * | |
129 | * Revision 2.2.1.9 1998/12/30 18:18:30 ivan | |
130 | * Changed access to PLX PCI bridge registers from I/O to MMIO, in | |
131 | * order to make PLX9050-based boards work with certain motherboards. | |
132 | * | |
133 | * Revision 2.2.1.8 1998/11/13 12:46:20 ivan | |
134 | * cy_close function now resets (correctly) the tty->closing flag; | |
135 | * JIFFIES_DIFF macro fixed. | |
136 | * | |
137 | * Revision 2.2.1.7 1998/09/03 12:07:28 ivan | |
138 | * Fixed bug in cy_close function, which was not informing HW of | |
139 | * which port should have the reception disabled before doing so; | |
140 | * fixed Cyclom-8YoP hardware detection bug. | |
141 | * | |
142 | * Revision 2.2.1.6 1998/08/20 17:15:39 ivan | |
143 | * Fixed bug in cy_close function, which causes malfunction | |
144 | * of one of the first 4 ports when a higher port is closed | |
145 | * (Cyclom-Y only). | |
146 | * | |
147 | * Revision 2.2.1.5 1998/08/10 18:10:28 ivan | |
148 | * Fixed Cyclom-4Yo hardware detection bug. | |
149 | * | |
150 | * Revision 2.2.1.4 1998/08/04 11:02:50 ivan | |
151 | * /proc/cyclades implementation with great collaboration of | |
152 | * Marc Lewis <marc@blarg.net>; | |
153 | * cyy_interrupt was changed to avoid occurrence of kernel oopses | |
154 | * during PPP operation. | |
155 | * | |
156 | * Revision 2.2.1.3 1998/06/01 12:09:10 ivan | |
157 | * General code review in order to comply with 2.1 kernel standards; | |
158 | * data loss prevention for slow devices revisited (cy_wait_until_sent | |
159 | * was created); | |
160 | * removed conditional compilation for new/old PCI structure support | |
161 | * (now the driver only supports the new PCI structure). | |
162 | * | |
163 | * Revision 2.2.1.1 1998/03/19 16:43:12 ivan | |
164 | * added conditional compilation for new/old PCI structure support; | |
165 | * removed kernel series (2.0.x / 2.1.x) conditional compilation. | |
166 | * | |
167 | * Revision 2.1.1.3 1998/03/16 18:01:12 ivan | |
168 | * cleaned up the data loss fix; | |
169 | * fixed XON/XOFF handling once more (Cyclades-Z); | |
170 | * general review of the driver routines; | |
171 | * introduction of a mechanism to prevent data loss with slow | |
172 | * printers, by forcing a delay before closing the port. | |
173 | * | |
174 | * Revision 2.1.1.2 1998/02/17 16:50:00 ivan | |
175 | * fixed detection/handling of new CD1400 in Ye boards; | |
176 | * fixed XON/XOFF handling (Cyclades-Z); | |
177 | * fixed data loss caused by a premature port close; | |
178 | * introduction of a flag that holds the CD1400 version ID per port | |
179 | * (used by the CYGETCD1400VER new ioctl). | |
180 | * | |
181 | * Revision 2.1.1.1 1997/12/03 17:31:19 ivan | |
182 | * Code review for the module cleanup routine; | |
183 | * fixed RTS and DTR status report for new CD1400's in get_modem_info; | |
184 | * includes anonymous changes regarding signal_pending. | |
185 | * | |
186 | * Revision 2.1 1997/11/01 17:42:41 ivan | |
187 | * Changes in the driver to support Alpha systems (except 8Zo V_1); | |
188 | * BREAK fix for the Cyclades-Z boards; | |
189 | * driver inactivity control by FW implemented; | |
190 | * introduction of flag that allows driver to take advantage of | |
191 | * a special CD1400 feature related to HW flow control; | |
192 | * added support for the CD1400 rev. J (Cyclom-Y boards); | |
193 | * introduction of ioctls to: | |
194 | * - control the rtsdtr_inv flag (Cyclom-Y); | |
195 | * - control the rflow flag (Cyclom-Y); | |
196 | * - adjust the polling interval (Cyclades-Z); | |
197 | * | |
198 | * Revision 1.36.4.33 1997/06/27 19:00:00 ivan | |
199 | * Fixes related to kernel version conditional | |
200 | * compilation. | |
201 | * | |
202 | * Revision 1.36.4.32 1997/06/14 19:30:00 ivan | |
203 | * Compatibility issues between kernels 2.0.x and | |
204 | * 2.1.x (mainly related to clear_bit function). | |
205 | * | |
206 | * Revision 1.36.4.31 1997/06/03 15:30:00 ivan | |
207 | * Changes to define the memory window according to the | |
208 | * board type. | |
209 | * | |
210 | * Revision 1.36.4.30 1997/05/16 15:30:00 daniel | |
211 | * Changes to support new cycladesZ boards. | |
212 | * | |
213 | * Revision 1.36.4.29 1997/05/12 11:30:00 daniel | |
214 | * Merge of Bentson's and Daniel's version 1.36.4.28. | |
215 | * Corrects bug in cy_detect_pci: check if there are more | |
216 | * ports than the number of static structs allocated. | |
217 | * Warning message during initialization if this driver is | |
218 | * used with the new generation of cycladesZ boards. Those | |
219 | * will be supported only in next release of the driver. | |
220 | * Corrects bug in cy_detect_pci and cy_detect_isa that | |
221 | * returned wrong number of VALID boards, when a cyclomY | |
222 | * was found with no serial modules connected. | |
223 | * Changes to use current (2.1.x) kernel subroutine names | |
224 | * and created macros for compilation with 2.0.x kernel, | |
225 | * instead of the other way around. | |
226 | * | |
227 | * Revision 1.36.4.28 1997/05/?? ??:00:00 bentson | |
228 | * Change queue_task_irq_off to queue_task_irq. | |
229 | * The inline function queue_task_irq_off (tqueue.h) | |
230 | * was removed from latest releases of 2.1.x kernel. | |
231 | * Use of macro __init to mark the initialization | |
232 | * routines, so memory can be reused. | |
233 | * Also incorporate implementation of critical region | |
234 | * in function cleanup_module() created by anonymous | |
235 | * linuxer. | |
236 | * | |
237 | * Revision 1.36.4.28 1997/04/25 16:00:00 daniel | |
238 | * Change to support new firmware that solves DCD problem: | |
239 | * application could fail to receive SIGHUP signal when DCD | |
240 | * varying too fast. | |
241 | * | |
242 | * Revision 1.36.4.27 1997/03/26 10:30:00 daniel | |
243 | * Changed for support linux versions 2.1.X. | |
244 | * Backward compatible with linux versions 2.0.X. | |
245 | * Corrected illegal use of filler field in | |
246 | * CH_CTRL struct. | |
247 | * Deleted some debug messages. | |
248 | * | |
249 | * Revision 1.36.4.26 1997/02/27 12:00:00 daniel | |
250 | * Included check for NULL tty pointer in cyz_poll. | |
251 | * | |
252 | * Revision 1.36.4.25 1997/02/26 16:28:30 bentson | |
253 | * Bill Foster at Blarg! Online services noticed that | |
254 | * some of the switch elements of -Z modem control | |
255 | * lacked a closing "break;" | |
256 | * | |
257 | * Revision 1.36.4.24 1997/02/24 11:00:00 daniel | |
258 | * Changed low water threshold for buffer xmit_buf | |
259 | * | |
260 | * Revision 1.36.4.23 1996/12/02 21:50:16 bentson | |
261 | * Marcio provided fix to modem status fetch for -Z | |
262 | * | |
263 | * Revision 1.36.4.22 1996/10/28 22:41:17 bentson | |
264 | * improve mapping of -Z control page (thanks to Steve | |
265 | * Price <stevep@fa.tdktca.com> for help on this) | |
266 | * | |
267 | * Revision 1.36.4.21 1996/09/10 17:00:10 bentson | |
268 | * shift from CPU-bound to memcopy in cyz_polling operation | |
269 | * | |
270 | * Revision 1.36.4.20 1996/09/09 18:30:32 Bentson | |
271 | * Added support to set and report higher speeds. | |
272 | * | |
273 | * Revision 1.36.4.19c 1996/08/09 10:00:00 Marcio Saito | |
274 | * Some fixes in the HW flow control for the BETA release. | |
275 | * Don't try to register the IRQ. | |
276 | * | |
277 | * Revision 1.36.4.19 1996/08/08 16:23:18 Bentson | |
278 | * make sure "cyc" appears in all kernel messages; all soft interrupts | |
279 | * handled by same routine; recognize out-of-band reception; comment | |
280 | * out some diagnostic messages; leave RTS/CTS flow control to hardware; | |
33430dc5 | 281 | * fix race condition in -Z buffer management; only -Y needs to explicitly |
1da177e4 LT |
282 | * flush chars; tidy up some startup messages; |
283 | * | |
284 | * Revision 1.36.4.18 1996/07/25 18:57:31 bentson | |
285 | * shift MOD_INC_USE_COUNT location to match | |
286 | * serial.c; purge some diagnostic messages; | |
287 | * | |
288 | * Revision 1.36.4.17 1996/07/25 18:01:08 bentson | |
289 | * enable modem status messages and fetch & process them; note | |
290 | * time of last activity type for each port; set_line_char now | |
291 | * supports more than line 0 and treats 0 baud correctly; | |
292 | * get_modem_info senses rs_status; | |
293 | * | |
294 | * Revision 1.36.4.16 1996/07/20 08:43:15 bentson | |
295 | * barely works--now's time to turn on | |
296 | * more features 'til it breaks | |
297 | * | |
298 | * Revision 1.36.4.15 1996/07/19 22:30:06 bentson | |
299 | * check more -Z board status; shorten boot message | |
300 | * | |
301 | * Revision 1.36.4.14 1996/07/19 22:20:37 bentson | |
302 | * fix reference to ch_ctrl in startup; verify return | |
303 | * values from cyz_issue_cmd and cyz_update_channel; | |
304 | * more stuff to get modem control correct; | |
305 | * | |
306 | * Revision 1.36.4.13 1996/07/11 19:53:33 bentson | |
307 | * more -Z stuff folded in; re-order changes to put -Z stuff | |
308 | * after -Y stuff (to make changes clearer) | |
309 | * | |
310 | * Revision 1.36.4.12 1996/07/11 15:40:55 bentson | |
311 | * Add code to poll Cyclades-Z. Add code to get & set RS-232 control. | |
312 | * Add code to send break. Clear firmware ID word at startup (so | |
313 | * that other code won't talk to inactive board). | |
314 | * | |
315 | * Revision 1.36.4.11 1996/07/09 05:28:29 bentson | |
316 | * add code for -Z in set_line_char | |
317 | * | |
318 | * Revision 1.36.4.10 1996/07/08 19:28:37 bentson | |
319 | * fold more -Z stuff (or in some cases, error messages) | |
320 | * into driver; add text to "don't know what to do" messages. | |
321 | * | |
322 | * Revision 1.36.4.9 1996/07/08 18:38:38 bentson | |
323 | * moved compile-time flags near top of file; cosmetic changes | |
324 | * to narrow text (to allow 2-up printing); changed many declarations | |
325 | * to "static" to limit external symbols; shuffled code order to | |
326 | * coalesce -Y and -Z specific code, also to put internal functions | |
327 | * in order of tty_driver structure; added code to recognize -Z | |
328 | * ports (and for moment, do nothing or report error); add cy_startup | |
329 | * to parse boot command line for extra base addresses for ISA probes; | |
330 | * | |
331 | * Revision 1.36.4.8 1996/06/25 17:40:19 bentson | |
332 | * reorder some code, fix types of some vars (int vs. long), | |
333 | * add cy_setup to support user declared ISA addresses | |
334 | * | |
335 | * Revision 1.36.4.7 1996/06/21 23:06:18 bentson | |
336 | * dump ioctl based firmware load (it's now a user level | |
337 | * program); ensure uninitialzed ports cannot be used | |
338 | * | |
339 | * Revision 1.36.4.6 1996/06/20 23:17:19 bentson | |
340 | * rename vars and restructure some code | |
341 | * | |
342 | * Revision 1.36.4.5 1996/06/14 15:09:44 bentson | |
343 | * get right status back after boot load | |
344 | * | |
345 | * Revision 1.36.4.4 1996/06/13 19:51:44 bentson | |
346 | * successfully loads firmware | |
347 | * | |
348 | * Revision 1.36.4.3 1996/06/13 06:08:33 bentson | |
349 | * add more of the code for the boot/load ioctls | |
350 | * | |
351 | * Revision 1.36.4.2 1996/06/11 21:00:51 bentson | |
352 | * start to add Z functionality--starting with ioctl | |
353 | * for loading firmware | |
354 | * | |
355 | * Revision 1.36.4.1 1996/06/10 18:03:02 bentson | |
356 | * added code to recognize Z/PCI card at initialization; report | |
357 | * presence, but card is not initialized (because firmware needs | |
358 | * to be loaded) | |
359 | * | |
360 | * Revision 1.36.3.8 1996/06/07 16:29:00 bentson | |
361 | * starting minor number at zero; added missing verify_area | |
362 | * as noted by Heiko Eissfeldt <heiko@colossus.escape.de> | |
363 | * | |
364 | * Revision 1.36.3.7 1996/04/19 21:06:18 bentson | |
365 | * remove unneeded boot message & fix CLOCAL hardware flow | |
366 | * control (Miquel van Smoorenburg <miquels@Q.cistron.nl>); | |
367 | * remove unused diagnostic statements; minor 0 is first; | |
368 | * | |
369 | * Revision 1.36.3.6 1996/03/13 13:21:17 marcio | |
370 | * The kernel function vremap (available only in later 1.3.xx kernels) | |
371 | * allows the access to memory addresses above the RAM. This revision | |
372 | * of the driver supports PCI boards below 1Mb (device id 0x100) and | |
373 | * above 1Mb (device id 0x101). | |
374 | * | |
375 | * Revision 1.36.3.5 1996/03/07 15:20:17 bentson | |
376 | * Some global changes to interrupt handling spilled into | |
377 | * this driver--mostly unused arguments in system function | |
378 | * calls. Also added change by Marcio Saito which should | |
379 | * reduce lost interrupts at startup by fast processors. | |
380 | * | |
381 | * Revision 1.36.3.4 1995/11/13 20:45:10 bentson | |
382 | * Changes by Corey Minyard <minyard@wf-rch.cirr.com> distributed | |
383 | * in 1.3.41 kernel to remove a possible race condition, extend | |
384 | * some error messages, and let the driver run as a loadable module | |
385 | * Change by Alan Wendt <alan@ez0.ezlink.com> to remove a | |
386 | * possible race condition. | |
387 | * Change by Marcio Saito <marcio@cyclades.com> to fix PCI addressing. | |
388 | * | |
389 | * Revision 1.36.3.3 1995/11/13 19:44:48 bentson | |
390 | * Changes by Linus Torvalds in 1.3.33 kernel distribution | |
391 | * required due to reordering of driver initialization. | |
392 | * Drivers are now initialized *after* memory management. | |
393 | * | |
394 | * Revision 1.36.3.2 1995/09/08 22:07:14 bentson | |
395 | * remove printk from ISR; fix typo | |
396 | * | |
397 | * Revision 1.36.3.1 1995/09/01 12:00:42 marcio | |
398 | * Minor fixes in the PCI board support. PCI function calls in | |
399 | * conditional compilation (CONFIG_PCI). Thanks to Jim Duncan | |
400 | * <duncan@okay.com>. "bad serial count" message removed. | |
401 | * | |
402 | * Revision 1.36.3 1995/08/22 09:19:42 marcio | |
403 | * Cyclom-Y/PCI support added. Changes in the cy_init routine and | |
404 | * board initialization. Changes in the boot messages. The driver | |
405 | * supports up to 4 boards and 64 ports by default. | |
406 | * | |
407 | * Revision 1.36.1.4 1995/03/29 06:14:14 bentson | |
408 | * disambiguate between Cyclom-16Y and Cyclom-32Ye; | |
409 | * | |
410 | * Revision 1.36.1.3 1995/03/23 22:15:35 bentson | |
411 | * add missing break in modem control block in ioctl switch statement | |
412 | * (discovered by Michael Edward Chastain <mec@jobe.shell.portal.com>); | |
413 | * | |
414 | * Revision 1.36.1.2 1995/03/22 19:16:22 bentson | |
415 | * make sure CTS flow control is set as soon as possible (thanks | |
416 | * to note from David Lambert <lambert@chesapeake.rps.slb.com>); | |
417 | * | |
418 | * Revision 1.36.1.1 1995/03/13 15:44:43 bentson | |
419 | * initialize defaults for receive threshold and stale data timeout; | |
420 | * cosmetic changes; | |
421 | * | |
422 | * Revision 1.36 1995/03/10 23:33:53 bentson | |
423 | * added support of chips 4-7 in 32 port Cyclom-Ye; | |
424 | * fix cy_interrupt pointer dereference problem | |
425 | * (Joe Portman <baron@aa.net>); | |
426 | * give better error response if open is attempted on non-existent port | |
427 | * (Zachariah Vaum <jchryslr@netcom.com>); | |
428 | * correct command timeout (Kenneth Lerman <lerman@@seltd.newnet.com>); | |
429 | * conditional compilation for -16Y on systems with fast, noisy bus; | |
430 | * comment out diagnostic print function; | |
431 | * cleaned up table of base addresses; | |
432 | * set receiver time-out period register to correct value, | |
433 | * set receive threshold to better default values, | |
434 | * set chip timer to more accurate 200 Hz ticking, | |
435 | * add code to monitor and modify receive parameters | |
436 | * (Rik Faith <faith@cs.unc.edu> Nick Simicich | |
437 | * <njs@scifi.emi.net>); | |
438 | * | |
439 | * Revision 1.35 1994/12/16 13:54:18 steffen | |
440 | * additional patch by Marcio Saito for board detection | |
441 | * Accidently left out in 1.34 | |
442 | * | |
443 | * Revision 1.34 1994/12/10 12:37:12 steffen | |
444 | * This is the corrected version as suggested by Marcio Saito | |
445 | * | |
446 | * Revision 1.33 1994/12/01 22:41:18 bentson | |
447 | * add hooks to support more high speeds directly; add tytso | |
448 | * patch regarding CLOCAL wakeups | |
449 | * | |
450 | * Revision 1.32 1994/11/23 19:50:04 bentson | |
451 | * allow direct kernel control of higher signalling rates; | |
452 | * look for cards at additional locations | |
453 | * | |
454 | * Revision 1.31 1994/11/16 04:33:28 bentson | |
455 | * ANOTHER fix from Corey Minyard, minyard@wf-rch.cirr.com-- | |
456 | * a problem in chars_in_buffer has been resolved by some | |
457 | * small changes; this should yield smoother output | |
458 | * | |
459 | * Revision 1.30 1994/11/16 04:28:05 bentson | |
460 | * Fix from Corey Minyard, Internet: minyard@metronet.com, | |
461 | * UUCP: minyard@wf-rch.cirr.com, WORK: minyardbnr.ca, to | |
462 | * cy_hangup that appears to clear up much (all?) of the | |
463 | * DTR glitches; also he's added/cleaned-up diagnostic messages | |
464 | * | |
465 | * Revision 1.29 1994/11/16 04:16:07 bentson | |
466 | * add change proposed by Ralph Sims, ralphs@halcyon.com, to | |
467 | * operate higher speeds in same way as other serial ports; | |
468 | * add more serial ports (for up to two 16-port muxes). | |
469 | * | |
470 | * Revision 1.28 1994/11/04 00:13:16 root | |
471 | * turn off diagnostic messages | |
472 | * | |
473 | * Revision 1.27 1994/11/03 23:46:37 root | |
474 | * bunch of changes to bring driver into greater conformance | |
475 | * with the serial.c driver (looking for missed fixes) | |
476 | * | |
477 | * Revision 1.26 1994/11/03 22:40:36 root | |
478 | * automatic interrupt probing fixed. | |
479 | * | |
480 | * Revision 1.25 1994/11/03 20:17:02 root | |
481 | * start to implement auto-irq | |
482 | * | |
483 | * Revision 1.24 1994/11/03 18:01:55 root | |
484 | * still working on modem signals--trying not to drop DTR | |
485 | * during the getty/login processes | |
486 | * | |
487 | * Revision 1.23 1994/11/03 17:51:36 root | |
488 | * extend baud rate support; set receive threshold as function | |
489 | * of baud rate; fix some problems with RTS/CTS; | |
490 | * | |
491 | * Revision 1.22 1994/11/02 18:05:35 root | |
492 | * changed arguments to udelay to type long to get | |
493 | * delays to be of correct duration | |
494 | * | |
495 | * Revision 1.21 1994/11/02 17:37:30 root | |
496 | * employ udelay (after calibrating loops_per_second earlier | |
497 | * in init/main.c) instead of using home-grown delay routines | |
498 | * | |
499 | * Revision 1.20 1994/11/02 03:11:38 root | |
500 | * cy_chars_in_buffer forces a return value of 0 to let | |
501 | * login work (don't know why it does); some functions | |
502 | * that were returning EFAULT, now executes the code; | |
503 | * more work on deciding when to disable xmit interrupts; | |
504 | * | |
505 | * Revision 1.19 1994/11/01 20:10:14 root | |
506 | * define routine to start transmission interrupts (by enabling | |
507 | * transmit interrupts); directly enable/disable modem interrupts; | |
508 | * | |
509 | * Revision 1.18 1994/11/01 18:40:45 bentson | |
510 | * Don't always enable transmit interrupts in startup; interrupt on | |
511 | * TxMpty instead of TxRdy to help characters get out before shutdown; | |
512 | * restructure xmit interrupt to check for chars first and quit if | |
513 | * none are ready to go; modem status (MXVRx) is upright, _not_ inverted | |
514 | * (to my view); | |
515 | * | |
516 | * Revision 1.17 1994/10/30 04:39:45 bentson | |
517 | * rename serial_driver and callout_driver to cy_serial_driver and | |
518 | * cy_callout_driver to avoid linkage interference; initialize | |
519 | * info->type to PORT_CIRRUS; ruggedize paranoia test; elide ->port | |
520 | * from cyclades_port structure; add paranoia check to cy_close; | |
521 | * | |
522 | * Revision 1.16 1994/10/30 01:14:33 bentson | |
523 | * change major numbers; add some _early_ return statements; | |
524 | * | |
525 | * Revision 1.15 1994/10/29 06:43:15 bentson | |
526 | * final tidying up for clean compile; enable some error reporting | |
527 | * | |
528 | * Revision 1.14 1994/10/28 20:30:22 Bentson | |
529 | * lots of changes to drag the driver towards the new tty_io | |
530 | * structures and operation. not expected to work, but may | |
531 | * compile cleanly. | |
532 | * | |
533 | * Revision 1.13 1994/07/21 23:08:57 Bentson | |
534 | * add some diagnostic cruft; support 24 lines (for testing | |
535 | * both -8Y and -16Y cards; be more thorough in servicing all | |
536 | * chips during interrupt; add "volatile" a few places to | |
537 | * circumvent compiler optimizations; fix base & offset | |
538 | * computations in block_til_ready (was causing chip 0 to | |
539 | * stop operation) | |
540 | * | |
541 | * Revision 1.12 1994/07/19 16:42:11 Bentson | |
542 | * add some hackery for kernel version 1.1.8; expand | |
543 | * error messages; refine timing for delay loops and | |
544 | * declare loop params volatile | |
545 | * | |
546 | * Revision 1.11 1994/06/11 21:53:10 bentson | |
547 | * get use of save_car right in transmit interrupt service | |
548 | * | |
549 | * Revision 1.10.1.1 1994/06/11 21:31:18 bentson | |
550 | * add some diagnostic printing; try to fix save_car stuff | |
551 | * | |
552 | * Revision 1.10 1994/06/11 20:36:08 bentson | |
553 | * clean up compiler warnings | |
554 | * | |
555 | * Revision 1.9 1994/06/11 19:42:46 bentson | |
556 | * added a bunch of code to support modem signalling | |
557 | * | |
558 | * Revision 1.8 1994/06/11 17:57:07 bentson | |
559 | * recognize break & parity error | |
560 | * | |
561 | * Revision 1.7 1994/06/05 05:51:34 bentson | |
562 | * Reorder baud table to be monotonic; add cli to CP; discard | |
563 | * incoming characters and status if the line isn't open; start to | |
564 | * fold code into cy_throttle; start to port get_serial_info, | |
565 | * set_serial_info, get_modem_info, set_modem_info, and send_break | |
566 | * from serial.c; expand cy_ioctl; relocate and expand config_setup; | |
567 | * get flow control characters from tty struct; invalidate ports w/o | |
568 | * hardware; | |
569 | * | |
570 | * Revision 1.6 1994/05/31 18:42:21 bentson | |
571 | * add a loop-breaker in the interrupt service routine; | |
572 | * note when port is initialized so that it can be shut | |
573 | * down under the right conditions; receive works without | |
574 | * any obvious errors | |
575 | * | |
576 | * Revision 1.5 1994/05/30 00:55:02 bentson | |
577 | * transmit works without obvious errors | |
578 | * | |
579 | * Revision 1.4 1994/05/27 18:46:27 bentson | |
580 | * incorporated more code from lib_y.c; can now print short | |
581 | * strings under interrupt control to port zero; seems to | |
582 | * select ports/channels/lines correctly | |
583 | * | |
584 | * Revision 1.3 1994/05/25 22:12:44 bentson | |
585 | * shifting from multi-port on a card to proper multiplexor | |
586 | * data structures; added skeletons of most routines | |
587 | * | |
588 | * Revision 1.2 1994/05/19 13:21:43 bentson | |
589 | * start to crib from other sources | |
590 | * | |
591 | */ | |
592 | ||
c8e1693a | 593 | #define CY_VERSION "2.5" |
096dcfce | 594 | |
1da177e4 LT |
595 | /* If you need to install more boards than NR_CARDS, change the constant |
596 | in the definition below. No other change is necessary to support up to | |
597 | eight boards. Beyond that you'll have to extend cy_isa_addresses. */ | |
598 | ||
02f1175c | 599 | #define NR_CARDS 4 |
1da177e4 LT |
600 | |
601 | /* | |
602 | If the total number of ports is larger than NR_PORTS, change this | |
603 | constant in the definition below. No other change is necessary to | |
604 | support more boards/ports. */ | |
605 | ||
02f1175c | 606 | #define NR_PORTS 256 |
1da177e4 LT |
607 | |
608 | #define ZE_V1_NPORTS 64 | |
609 | #define ZO_V1 0 | |
610 | #define ZO_V2 1 | |
611 | #define ZE_V1 2 | |
612 | ||
613 | #define SERIAL_PARANOIA_CHECK | |
614 | #undef CY_DEBUG_OPEN | |
615 | #undef CY_DEBUG_THROTTLE | |
616 | #undef CY_DEBUG_OTHER | |
617 | #undef CY_DEBUG_IO | |
618 | #undef CY_DEBUG_COUNT | |
619 | #undef CY_DEBUG_DTR | |
620 | #undef CY_DEBUG_WAIT_UNTIL_SENT | |
621 | #undef CY_DEBUG_INTERRUPTS | |
622 | #undef CY_16Y_HACK | |
623 | #undef CY_ENABLE_MONITORING | |
624 | #undef CY_PCI_DEBUG | |
625 | ||
1da177e4 LT |
626 | /* |
627 | * Include section | |
628 | */ | |
1da177e4 LT |
629 | #include <linux/module.h> |
630 | #include <linux/errno.h> | |
631 | #include <linux/signal.h> | |
632 | #include <linux/sched.h> | |
633 | #include <linux/timer.h> | |
634 | #include <linux/interrupt.h> | |
635 | #include <linux/tty.h> | |
33f0f88f | 636 | #include <linux/tty_flip.h> |
1da177e4 LT |
637 | #include <linux/serial.h> |
638 | #include <linux/major.h> | |
639 | #include <linux/string.h> | |
640 | #include <linux/fcntl.h> | |
641 | #include <linux/ptrace.h> | |
642 | #include <linux/cyclades.h> | |
643 | #include <linux/mm.h> | |
644 | #include <linux/ioport.h> | |
645 | #include <linux/init.h> | |
646 | #include <linux/delay.h> | |
647 | #include <linux/spinlock.h> | |
648 | #include <linux/bitops.h> | |
054f5b0a | 649 | #include <linux/firmware.h> |
1da177e4 LT |
650 | |
651 | #include <asm/system.h> | |
652 | #include <asm/io.h> | |
653 | #include <asm/irq.h> | |
654 | #include <asm/uaccess.h> | |
655 | ||
1da177e4 LT |
656 | #include <linux/kernel.h> |
657 | #include <linux/pci.h> | |
658 | ||
659 | #include <linux/stat.h> | |
660 | #include <linux/proc_fs.h> | |
661 | ||
02f1175c JS |
662 | static void cy_throttle(struct tty_struct *tty); |
663 | static void cy_send_xchar(struct tty_struct *tty, char ch); | |
1da177e4 LT |
664 | |
665 | #define IS_CYC_Z(card) ((card).num_chips == -1) | |
666 | ||
667 | #define Z_FPGA_CHECK(card) \ | |
db05c3b1 | 668 | ((readl(&((struct RUNTIME_9060 __iomem *) \ |
02f1175c | 669 | ((card).ctl_addr))->init_ctrl) & (1<<17)) != 0) |
1da177e4 | 670 | |
db05c3b1 | 671 | #define ISZLOADED(card) (((ZO_V1==readl(&((struct RUNTIME_9060 __iomem *) \ |
1da177e4 LT |
672 | ((card).ctl_addr))->mail_box_0)) || \ |
673 | Z_FPGA_CHECK(card)) && \ | |
db05c3b1 | 674 | (ZFIRM_ID==readl(&((struct FIRM_ID __iomem *) \ |
1da177e4 LT |
675 | ((card).base_addr+ID_ADDRESS))->signature))) |
676 | ||
677 | #ifndef SERIAL_XMIT_SIZE | |
678 | #define SERIAL_XMIT_SIZE (min(PAGE_SIZE, 4096)) | |
679 | #endif | |
680 | #define WAKEUP_CHARS 256 | |
681 | ||
682 | #define STD_COM_FLAGS (0) | |
683 | ||
054f5b0a JS |
684 | /* firmware stuff */ |
685 | #define ZL_MAX_BLOCKS 16 | |
686 | #define DRIVER_VERSION 0x02010203 | |
687 | #define RAM_SIZE 0x80000 | |
688 | ||
689 | #define Z_FPGA_LOADED(X) ((readl(&(X)->init_ctrl) & (1<<17)) != 0) | |
690 | ||
691 | enum zblock_type { | |
692 | ZBLOCK_PRG = 0, | |
693 | ZBLOCK_FPGA = 1 | |
694 | }; | |
695 | ||
696 | struct zfile_header { | |
697 | char name[64]; | |
698 | char date[32]; | |
699 | char aux[32]; | |
700 | u32 n_config; | |
701 | u32 config_offset; | |
702 | u32 n_blocks; | |
703 | u32 block_offset; | |
704 | u32 reserved[9]; | |
705 | } __attribute__ ((packed)); | |
706 | ||
707 | struct zfile_config { | |
708 | char name[64]; | |
709 | u32 mailbox; | |
710 | u32 function; | |
711 | u32 n_blocks; | |
712 | u32 block_list[ZL_MAX_BLOCKS]; | |
713 | } __attribute__ ((packed)); | |
714 | ||
715 | struct zfile_block { | |
716 | u32 type; | |
717 | u32 file_offset; | |
718 | u32 ram_offset; | |
719 | u32 size; | |
720 | } __attribute__ ((packed)); | |
721 | ||
1da177e4 LT |
722 | static struct tty_driver *cy_serial_driver; |
723 | ||
724 | #ifdef CONFIG_ISA | |
725 | /* This is the address lookup table. The driver will probe for | |
726 | Cyclom-Y/ISA boards at all addresses in here. If you want the | |
727 | driver to probe addresses at a different address, add it to | |
728 | this table. If the driver is probing some other board and | |
729 | causing problems, remove the offending address from this table. | |
730 | The cy_setup function extracts additional addresses from the | |
731 | boot options line. The form is "cyclades=address,address..." | |
732 | */ | |
733 | ||
734 | static unsigned int cy_isa_addresses[] = { | |
02f1175c JS |
735 | 0xD0000, |
736 | 0xD2000, | |
737 | 0xD4000, | |
738 | 0xD6000, | |
739 | 0xD8000, | |
740 | 0xDA000, | |
741 | 0xDC000, | |
742 | 0xDE000, | |
743 | 0, 0, 0, 0, 0, 0, 0, 0 | |
1da177e4 | 744 | }; |
02f1175c | 745 | |
fe971071 | 746 | #define NR_ISA_ADDRS ARRAY_SIZE(cy_isa_addresses) |
1da177e4 LT |
747 | |
748 | #ifdef MODULE | |
3046d50e JS |
749 | static long maddr[NR_CARDS]; |
750 | static int irq[NR_CARDS]; | |
1da177e4 LT |
751 | |
752 | module_param_array(maddr, long, NULL, 0); | |
753 | module_param_array(irq, int, NULL, 0); | |
754 | #endif | |
755 | ||
02f1175c | 756 | #endif /* CONFIG_ISA */ |
1da177e4 LT |
757 | |
758 | /* This is the per-card data structure containing address, irq, number of | |
759 | channels, etc. This driver supports a maximum of NR_CARDS cards. | |
760 | */ | |
761 | static struct cyclades_card cy_card[NR_CARDS]; | |
762 | ||
02f1175c | 763 | static int cy_next_channel; /* next minor available */ |
1da177e4 | 764 | |
1da177e4 LT |
765 | /* |
766 | * This is used to look up the divisor speeds and the timeouts | |
767 | * We're normally limited to 15 distinct baud rates. The extra | |
768 | * are accessed via settings in info->flags. | |
769 | * 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, | |
770 | * 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, | |
771 | * HI VHI | |
772 | * 20 | |
773 | */ | |
774 | static int baud_table[] = { | |
02f1175c JS |
775 | 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, |
776 | 1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000, | |
777 | 230400, 0 | |
778 | }; | |
779 | ||
780 | static char baud_co_25[] = { /* 25 MHz clock option table */ | |
781 | /* value => 00 01 02 03 04 */ | |
782 | /* divide by 8 32 128 512 2048 */ | |
783 | 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02, | |
784 | 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 | |
785 | }; | |
786 | ||
787 | static char baud_bpr_25[] = { /* 25 MHz baud rate period table */ | |
788 | 0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3, | |
789 | 0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15 | |
790 | }; | |
791 | ||
792 | static char baud_co_60[] = { /* 60 MHz clock option table (CD1400 J) */ | |
793 | /* value => 00 01 02 03 04 */ | |
794 | /* divide by 8 32 128 512 2048 */ | |
795 | 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, | |
796 | 0x03, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, | |
797 | 0x00 | |
798 | }; | |
799 | ||
800 | static char baud_bpr_60[] = { /* 60 MHz baud rate period table (CD1400 J) */ | |
801 | 0x00, 0x82, 0x21, 0xff, 0xdb, 0xc3, 0x92, 0x62, 0xc3, 0x62, | |
802 | 0x41, 0xc3, 0x62, 0xc3, 0x62, 0xc3, 0x82, 0x62, 0x41, 0x32, | |
803 | 0x21 | |
804 | }; | |
805 | ||
806 | static char baud_cor3[] = { /* receive threshold */ | |
807 | 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, | |
808 | 0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07, | |
809 | 0x07 | |
810 | }; | |
1da177e4 LT |
811 | |
812 | /* | |
813 | * The Cyclades driver implements HW flow control as any serial driver. | |
814 | * The cyclades_port structure member rflow and the vector rflow_thr | |
815 | * allows us to take advantage of a special feature in the CD1400 to avoid | |
816 | * data loss even when the system interrupt latency is too high. These flags | |
817 | * are to be used only with very special applications. Setting these flags | |
818 | * requires the use of a special cable (DTR and RTS reversed). In the new | |
819 | * CD1400-based boards (rev. 6.00 or later), there is no need for special | |
820 | * cables. | |
821 | */ | |
822 | ||
02f1175c JS |
823 | static char rflow_thr[] = { /* rflow threshold */ |
824 | 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
825 | 0x00, 0x00, 0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, | |
826 | 0x0a | |
827 | }; | |
1da177e4 LT |
828 | |
829 | /* The Cyclom-Ye has placed the sequential chips in non-sequential | |
830 | * address order. This look-up table overcomes that problem. | |
831 | */ | |
02f1175c JS |
832 | static int cy_chip_offset[] = { 0x0000, |
833 | 0x0400, | |
834 | 0x0800, | |
835 | 0x0C00, | |
836 | 0x0200, | |
837 | 0x0600, | |
838 | 0x0A00, | |
839 | 0x0E00 | |
840 | }; | |
1da177e4 LT |
841 | |
842 | /* PCI related definitions */ | |
843 | ||
1da177e4 | 844 | #ifdef CONFIG_PCI |
893de2df JS |
845 | static struct pci_device_id cy_pci_dev_id[] __devinitdata = { |
846 | { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Lo) }, /* PCI < 1Mb */ | |
847 | { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Hi) }, /* PCI > 1Mb */ | |
848 | { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Lo) }, /* 4Y PCI < 1Mb */ | |
849 | { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Hi) }, /* 4Y PCI > 1Mb */ | |
850 | { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Lo) }, /* 8Y PCI < 1Mb */ | |
851 | { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Hi) }, /* 8Y PCI > 1Mb */ | |
852 | { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Lo) }, /* Z PCI < 1Mb */ | |
853 | { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Hi) }, /* Z PCI > 1Mb */ | |
854 | { } /* end of table */ | |
02f1175c | 855 | }; |
893de2df | 856 | MODULE_DEVICE_TABLE(pci, cy_pci_dev_id); |
1da177e4 LT |
857 | #endif |
858 | ||
859 | static void cy_start(struct tty_struct *); | |
860 | static void set_line_char(struct cyclades_port *); | |
1a86b5e3 | 861 | static int cyz_issue_cmd(struct cyclades_card *, __u32, __u8, __u32); |
1da177e4 LT |
862 | #ifdef CONFIG_ISA |
863 | static unsigned detect_isa_irq(void __iomem *); | |
02f1175c | 864 | #endif /* CONFIG_ISA */ |
1da177e4 | 865 | |
02f1175c | 866 | static int cyclades_get_proc_info(char *, char **, off_t, int, int *, void *); |
1da177e4 LT |
867 | |
868 | #ifndef CONFIG_CYZ_INTR | |
869 | static void cyz_poll(unsigned long); | |
870 | ||
871 | /* The Cyclades-Z polling cycle is defined by this variable */ | |
872 | static long cyz_polling_cycle = CZ_DEF_POLL; | |
873 | ||
8d06afab | 874 | static DEFINE_TIMER(cyz_timerlist, cyz_poll, 0, 0); |
1da177e4 | 875 | |
02f1175c | 876 | #else /* CONFIG_CYZ_INTR */ |
1da177e4 LT |
877 | static void cyz_rx_restart(unsigned long); |
878 | static struct timer_list cyz_rx_full_timer[NR_PORTS]; | |
02f1175c | 879 | #endif /* CONFIG_CYZ_INTR */ |
1da177e4 | 880 | |
02f1175c JS |
881 | static inline int serial_paranoia_check(struct cyclades_port *info, |
882 | char *name, const char *routine) | |
1da177e4 LT |
883 | { |
884 | #ifdef SERIAL_PARANOIA_CHECK | |
02f1175c | 885 | if (!info) { |
21719191 JS |
886 | printk(KERN_WARNING "cyc Warning: null cyclades_port for (%s) " |
887 | "in %s\n", name, routine); | |
02f1175c JS |
888 | return 1; |
889 | } | |
890 | ||
02f1175c | 891 | if (info->magic != CYCLADES_MAGIC) { |
21719191 JS |
892 | printk(KERN_WARNING "cyc Warning: bad magic number for serial " |
893 | "struct (%s) in %s\n", name, routine); | |
02f1175c JS |
894 | return 1; |
895 | } | |
1da177e4 | 896 | #endif |
02f1175c JS |
897 | return 0; |
898 | } /* serial_paranoia_check */ | |
1da177e4 | 899 | |
1da177e4 LT |
900 | /***********************************************************/ |
901 | /********* Start of block of Cyclom-Y specific code ********/ | |
902 | ||
903 | /* This routine waits up to 1000 micro-seconds for the previous | |
904 | command to the Cirrus chip to complete and then issues the | |
905 | new command. An error is returned if the previous command | |
906 | didn't finish within the time limit. | |
907 | ||
908 | This function is only called from inside spinlock-protected code. | |
909 | */ | |
02f1175c | 910 | static int cyy_issue_cmd(void __iomem * base_addr, u_char cmd, int index) |
1da177e4 | 911 | { |
ad39c300 | 912 | unsigned int i; |
1da177e4 | 913 | |
02f1175c JS |
914 | /* Check to see that the previous command has completed */ |
915 | for (i = 0; i < 100; i++) { | |
db05c3b1 | 916 | if (readb(base_addr + (CyCCR << index)) == 0) { |
02f1175c JS |
917 | break; |
918 | } | |
919 | udelay(10L); | |
1da177e4 | 920 | } |
02f1175c JS |
921 | /* if the CCR never cleared, the previous command |
922 | didn't finish within the "reasonable time" */ | |
923 | if (i == 100) | |
096dcfce | 924 | return -1; |
1da177e4 | 925 | |
02f1175c JS |
926 | /* Issue the new command */ |
927 | cy_writeb(base_addr + (CyCCR << index), cmd); | |
1da177e4 | 928 | |
096dcfce | 929 | return 0; |
02f1175c | 930 | } /* cyy_issue_cmd */ |
1da177e4 LT |
931 | |
932 | #ifdef CONFIG_ISA | |
933 | /* ISA interrupt detection code */ | |
02f1175c | 934 | static unsigned detect_isa_irq(void __iomem * address) |
1da177e4 | 935 | { |
02f1175c JS |
936 | int irq; |
937 | unsigned long irqs, flags; | |
938 | int save_xir, save_car; | |
939 | int index = 0; /* IRQ probing is only for ISA */ | |
940 | ||
941 | /* forget possible initially masked and pending IRQ */ | |
942 | irq = probe_irq_off(probe_irq_on()); | |
943 | ||
944 | /* Clear interrupts on the board first */ | |
945 | cy_writeb(address + (Cy_ClrIntr << index), 0); | |
946 | /* Cy_ClrIntr is 0x1800 */ | |
947 | ||
948 | irqs = probe_irq_on(); | |
949 | /* Wait ... */ | |
950 | udelay(5000L); | |
951 | ||
952 | /* Enable the Tx interrupts on the CD1400 */ | |
953 | local_irq_save(flags); | |
954 | cy_writeb(address + (CyCAR << index), 0); | |
955 | cyy_issue_cmd(address, CyCHAN_CTL | CyENB_XMTR, index); | |
956 | ||
957 | cy_writeb(address + (CyCAR << index), 0); | |
958 | cy_writeb(address + (CySRER << index), | |
db05c3b1 | 959 | readb(address + (CySRER << index)) | CyTxRdy); |
02f1175c JS |
960 | local_irq_restore(flags); |
961 | ||
962 | /* Wait ... */ | |
963 | udelay(5000L); | |
964 | ||
965 | /* Check which interrupt is in use */ | |
966 | irq = probe_irq_off(irqs); | |
967 | ||
968 | /* Clean up */ | |
db05c3b1 JS |
969 | save_xir = (u_char) readb(address + (CyTIR << index)); |
970 | save_car = readb(address + (CyCAR << index)); | |
02f1175c JS |
971 | cy_writeb(address + (CyCAR << index), (save_xir & 0x3)); |
972 | cy_writeb(address + (CySRER << index), | |
db05c3b1 | 973 | readb(address + (CySRER << index)) & ~CyTxRdy); |
02f1175c JS |
974 | cy_writeb(address + (CyTIR << index), (save_xir & 0x3f)); |
975 | cy_writeb(address + (CyCAR << index), (save_car)); | |
976 | cy_writeb(address + (Cy_ClrIntr << index), 0); | |
977 | /* Cy_ClrIntr is 0x1800 */ | |
978 | ||
979 | return (irq > 0) ? irq : 0; | |
1da177e4 | 980 | } |
02f1175c | 981 | #endif /* CONFIG_ISA */ |
1da177e4 | 982 | |
ce97a097 JS |
983 | static void cyy_chip_rx(struct cyclades_card *cinfo, int chip, |
984 | void __iomem *base_addr) | |
e941027f JS |
985 | { |
986 | struct cyclades_port *info; | |
987 | struct tty_struct *tty; | |
ad39c300 | 988 | int char_count; |
ce97a097 | 989 | int j, len, index = cinfo->bus_index; |
e941027f JS |
990 | int save_xir, channel, save_car; |
991 | char data; | |
992 | ||
e941027f | 993 | #ifdef CY_DEBUG_INTERRUPTS |
ce97a097 | 994 | printk(KERN_DEBUG "cyy_interrupt: rcvd intr, chip %d\n", chip); |
e941027f | 995 | #endif |
ce97a097 JS |
996 | /* determine the channel & change to that context */ |
997 | spin_lock(&cinfo->card_lock); | |
998 | save_xir = (u_char) readb(base_addr + (CyRIR << index)); | |
999 | channel = (u_short) (save_xir & CyIRChannel); | |
1000 | info = &cinfo->ports[channel + chip * 4]; | |
1001 | save_car = readb(base_addr + (CyCAR << index)); | |
1002 | cy_writeb(base_addr + (CyCAR << index), save_xir); | |
1003 | ||
1004 | /* if there is nowhere to put the data, discard it */ | |
1005 | if (info->tty == NULL) { | |
1006 | j = (readb(base_addr + (CyRIVR << index)) & CyIVRMask); | |
1007 | if (j == CyIVRRxEx) { /* exception */ | |
1008 | data = readb(base_addr + (CyRDSR << index)); | |
1009 | } else { /* normal character reception */ | |
1010 | char_count = readb(base_addr + (CyRDCR << index)); | |
1011 | while (char_count--) | |
db05c3b1 | 1012 | data = readb(base_addr + (CyRDSR << index)); |
ce97a097 JS |
1013 | } |
1014 | goto end; | |
1015 | } | |
1016 | /* there is an open port for this data */ | |
1017 | tty = info->tty; | |
1018 | j = readb(base_addr + (CyRIVR << index)) & CyIVRMask; | |
1019 | if (j == CyIVRRxEx) { /* exception */ | |
1020 | data = readb(base_addr + (CyRDSR << index)); | |
1021 | ||
1022 | /* For statistics only */ | |
1023 | if (data & CyBREAK) | |
1024 | info->icount.brk++; | |
1025 | else if (data & CyFRAME) | |
1026 | info->icount.frame++; | |
1027 | else if (data & CyPARITY) | |
1028 | info->icount.parity++; | |
1029 | else if (data & CyOVERRUN) | |
1030 | info->icount.overrun++; | |
1031 | ||
1032 | if (data & info->ignore_status_mask) { | |
1033 | info->icount.rx++; | |
1034 | spin_unlock(&cinfo->card_lock); | |
1035 | return; | |
1036 | } | |
1037 | if (tty_buffer_request_room(tty, 1)) { | |
1038 | if (data & info->read_status_mask) { | |
1039 | if (data & CyBREAK) { | |
1040 | tty_insert_flip_char(tty, | |
1041 | readb(base_addr + (CyRDSR << | |
1042 | index)), TTY_BREAK); | |
1043 | info->icount.rx++; | |
1044 | if (info->flags & ASYNC_SAK) | |
1045 | do_SAK(tty); | |
1046 | } else if (data & CyFRAME) { | |
1047 | tty_insert_flip_char( tty, | |
1048 | readb(base_addr + (CyRDSR << | |
1049 | index)), TTY_FRAME); | |
1050 | info->icount.rx++; | |
1051 | info->idle_stats.frame_errs++; | |
1052 | } else if (data & CyPARITY) { | |
1053 | /* Pieces of seven... */ | |
1054 | tty_insert_flip_char(tty, | |
1055 | readb(base_addr + (CyRDSR << | |
1056 | index)), TTY_PARITY); | |
1057 | info->icount.rx++; | |
1058 | info->idle_stats.parity_errs++; | |
1059 | } else if (data & CyOVERRUN) { | |
1060 | tty_insert_flip_char(tty, 0, | |
1061 | TTY_OVERRUN); | |
1062 | info->icount.rx++; | |
1063 | /* If the flip buffer itself is | |
1064 | overflowing, we still lose | |
1065 | the next incoming character. | |
1066 | */ | |
1067 | tty_insert_flip_char(tty, | |
1068 | readb(base_addr + (CyRDSR << | |
1069 | index)), TTY_FRAME); | |
02f1175c | 1070 | info->icount.rx++; |
02f1175c | 1071 | info->idle_stats.overruns++; |
ce97a097 JS |
1072 | /* These two conditions may imply */ |
1073 | /* a normal read should be done. */ | |
1074 | /* } else if(data & CyTIMEOUT) { */ | |
1075 | /* } else if(data & CySPECHAR) { */ | |
1076 | } else { | |
1077 | tty_insert_flip_char(tty, 0, | |
1078 | TTY_NORMAL); | |
1079 | info->icount.rx++; | |
02f1175c | 1080 | } |
ce97a097 JS |
1081 | } else { |
1082 | tty_insert_flip_char(tty, 0, TTY_NORMAL); | |
1083 | info->icount.rx++; | |
1084 | } | |
1085 | } else { | |
1086 | /* there was a software buffer overrun and nothing | |
1087 | * could be done about it!!! */ | |
1088 | info->icount.buf_overrun++; | |
1089 | info->idle_stats.overruns++; | |
1090 | } | |
1091 | } else { /* normal character reception */ | |
1092 | /* load # chars available from the chip */ | |
1093 | char_count = readb(base_addr + (CyRDCR << index)); | |
e941027f JS |
1094 | |
1095 | #ifdef CY_ENABLE_MONITORING | |
ce97a097 JS |
1096 | ++info->mon.int_count; |
1097 | info->mon.char_count += char_count; | |
1098 | if (char_count > info->mon.char_max) | |
1099 | info->mon.char_max = char_count; | |
1100 | info->mon.char_last = char_count; | |
e941027f | 1101 | #endif |
ce97a097 JS |
1102 | len = tty_buffer_request_room(tty, char_count); |
1103 | while (len--) { | |
1104 | data = readb(base_addr + (CyRDSR << index)); | |
1105 | tty_insert_flip_char(tty, data, TTY_NORMAL); | |
1106 | info->idle_stats.recv_bytes++; | |
1107 | info->icount.rx++; | |
e941027f | 1108 | #ifdef CY_16Y_HACK |
ce97a097 | 1109 | udelay(10L); |
e941027f | 1110 | #endif |
e941027f | 1111 | } |
ce97a097 | 1112 | info->idle_stats.recv_idle = jiffies; |
e941027f | 1113 | } |
ce97a097 JS |
1114 | tty_schedule_flip(tty); |
1115 | end: | |
1116 | /* end of service */ | |
1117 | cy_writeb(base_addr + (CyRIR << index), save_xir & 0x3f); | |
1118 | cy_writeb(base_addr + (CyCAR << index), save_car); | |
1119 | spin_unlock(&cinfo->card_lock); | |
1120 | } | |
e941027f | 1121 | |
ce97a097 JS |
1122 | static void cyy_chip_tx(struct cyclades_card *cinfo, int chip, |
1123 | void __iomem *base_addr) | |
1124 | { | |
1125 | struct cyclades_port *info; | |
1126 | int char_count; | |
1127 | int outch; | |
1128 | int save_xir, channel, save_car, index = cinfo->bus_index; | |
1129 | ||
1130 | /* Since we only get here when the transmit buffer | |
1131 | is empty, we know we can always stuff a dozen | |
1132 | characters. */ | |
e941027f | 1133 | #ifdef CY_DEBUG_INTERRUPTS |
ce97a097 | 1134 | printk(KERN_DEBUG "cyy_interrupt: xmit intr, chip %d\n", chip); |
e941027f JS |
1135 | #endif |
1136 | ||
ce97a097 JS |
1137 | /* determine the channel & change to that context */ |
1138 | spin_lock(&cinfo->card_lock); | |
1139 | save_xir = (u_char) readb(base_addr + (CyTIR << index)); | |
1140 | channel = (u_short) (save_xir & CyIRChannel); | |
1141 | save_car = readb(base_addr + (CyCAR << index)); | |
1142 | cy_writeb(base_addr + (CyCAR << index), save_xir); | |
1143 | ||
1144 | /* validate the port# (as configured and open) */ | |
1145 | if (channel + chip * 4 >= cinfo->nports) { | |
1146 | cy_writeb(base_addr + (CySRER << index), | |
1147 | readb(base_addr + (CySRER << index)) & ~CyTxRdy); | |
1148 | goto end; | |
1149 | } | |
1150 | info = &cinfo->ports[channel + chip * 4]; | |
1151 | if (info->tty == NULL) { | |
1152 | cy_writeb(base_addr + (CySRER << index), | |
1153 | readb(base_addr + (CySRER << index)) & ~CyTxRdy); | |
1154 | goto end; | |
1155 | } | |
02f1175c | 1156 | |
ce97a097 JS |
1157 | /* load the on-chip space for outbound data */ |
1158 | char_count = info->xmit_fifo_size; | |
02f1175c | 1159 | |
ce97a097 JS |
1160 | if (info->x_char) { /* send special char */ |
1161 | outch = info->x_char; | |
1162 | cy_writeb(base_addr + (CyTDR << index), outch); | |
1163 | char_count--; | |
1164 | info->icount.tx++; | |
1165 | info->x_char = 0; | |
1166 | } | |
02f1175c | 1167 | |
ce97a097 JS |
1168 | if (info->breakon || info->breakoff) { |
1169 | if (info->breakon) { | |
1170 | cy_writeb(base_addr + (CyTDR << index), 0); | |
1171 | cy_writeb(base_addr + (CyTDR << index), 0x81); | |
1172 | info->breakon = 0; | |
1173 | char_count -= 2; | |
e941027f | 1174 | } |
ce97a097 JS |
1175 | if (info->breakoff) { |
1176 | cy_writeb(base_addr + (CyTDR << index), 0); | |
1177 | cy_writeb(base_addr + (CyTDR << index), 0x83); | |
1178 | info->breakoff = 0; | |
1179 | char_count -= 2; | |
e941027f | 1180 | } |
ce97a097 | 1181 | } |
02f1175c | 1182 | |
ce97a097 JS |
1183 | while (char_count-- > 0) { |
1184 | if (!info->xmit_cnt) { | |
1185 | if (readb(base_addr + (CySRER << index)) & CyTxMpty) { | |
1186 | cy_writeb(base_addr + (CySRER << index), | |
1187 | readb(base_addr + (CySRER << index)) & | |
02f1175c | 1188 | ~CyTxMpty); |
ce97a097 JS |
1189 | } else { |
1190 | cy_writeb(base_addr + (CySRER << index), | |
1191 | (readb(base_addr + (CySRER << index)) & | |
02f1175c | 1192 | ~CyTxRdy) | CyTxMpty); |
02f1175c | 1193 | } |
ce97a097 JS |
1194 | goto done; |
1195 | } | |
1196 | if (info->xmit_buf == NULL) { | |
1197 | cy_writeb(base_addr + (CySRER << index), | |
1198 | readb(base_addr + (CySRER << index)) & | |
02f1175c | 1199 | ~CyTxRdy); |
ce97a097 JS |
1200 | goto done; |
1201 | } | |
1202 | if (info->tty->stopped || info->tty->hw_stopped) { | |
1203 | cy_writeb(base_addr + (CySRER << index), | |
1204 | readb(base_addr + (CySRER << index)) & | |
02f1175c | 1205 | ~CyTxRdy); |
ce97a097 JS |
1206 | goto done; |
1207 | } | |
1208 | /* Because the Embedded Transmit Commands have been enabled, | |
1209 | * we must check to see if the escape character, NULL, is being | |
1210 | * sent. If it is, we must ensure that there is room for it to | |
1211 | * be doubled in the output stream. Therefore we no longer | |
1212 | * advance the pointer when the character is fetched, but | |
1213 | * rather wait until after the check for a NULL output | |
1214 | * character. This is necessary because there may not be room | |
1215 | * for the two chars needed to send a NULL.) | |
1216 | */ | |
1217 | outch = info->xmit_buf[info->xmit_tail]; | |
1218 | if (outch) { | |
1219 | info->xmit_cnt--; | |
1220 | info->xmit_tail = (info->xmit_tail + 1) & | |
1221 | (SERIAL_XMIT_SIZE - 1); | |
1222 | cy_writeb(base_addr + (CyTDR << index), outch); | |
1223 | info->icount.tx++; | |
1224 | } else { | |
1225 | if (char_count > 1) { | |
02f1175c JS |
1226 | info->xmit_cnt--; |
1227 | info->xmit_tail = (info->xmit_tail + 1) & | |
ce97a097 | 1228 | (SERIAL_XMIT_SIZE - 1); |
02f1175c | 1229 | cy_writeb(base_addr + (CyTDR << index), outch); |
ce97a097 | 1230 | cy_writeb(base_addr + (CyTDR << index), 0); |
02f1175c | 1231 | info->icount.tx++; |
ce97a097 | 1232 | char_count--; |
02f1175c | 1233 | } |
e941027f | 1234 | } |
e941027f JS |
1235 | } |
1236 | ||
ce97a097 JS |
1237 | done: |
1238 | tty_wakeup(info->tty); | |
1239 | end: | |
1240 | /* end of service */ | |
1241 | cy_writeb(base_addr + (CyTIR << index), save_xir & 0x3f); | |
1242 | cy_writeb(base_addr + (CyCAR << index), save_car); | |
1243 | spin_unlock(&cinfo->card_lock); | |
1244 | } | |
02f1175c | 1245 | |
ce97a097 JS |
1246 | static void cyy_chip_modem(struct cyclades_card *cinfo, int chip, |
1247 | void __iomem *base_addr) | |
1248 | { | |
1249 | struct cyclades_port *info; | |
1250 | int mdm_change, mdm_status; | |
1251 | int save_xir, channel, save_car, index = cinfo->bus_index; | |
1252 | ||
1253 | /* determine the channel & change to that context */ | |
1254 | spin_lock(&cinfo->card_lock); | |
1255 | save_xir = (u_char) readb(base_addr + (CyMIR << index)); | |
1256 | channel = (u_short) (save_xir & CyIRChannel); | |
1257 | info = &cinfo->ports[channel + chip * 4]; | |
1258 | save_car = readb(base_addr + (CyCAR << index)); | |
1259 | cy_writeb(base_addr + (CyCAR << index), save_xir); | |
1260 | ||
1261 | mdm_change = readb(base_addr + (CyMISR << index)); | |
1262 | mdm_status = readb(base_addr + (CyMSVR1 << index)); | |
1263 | ||
1264 | if (!info->tty) | |
1265 | goto end; | |
1266 | ||
1267 | if (mdm_change & CyANY_DELTA) { | |
1268 | /* For statistics only */ | |
1269 | if (mdm_change & CyDCD) | |
1270 | info->icount.dcd++; | |
1271 | if (mdm_change & CyCTS) | |
1272 | info->icount.cts++; | |
1273 | if (mdm_change & CyDSR) | |
1274 | info->icount.dsr++; | |
1275 | if (mdm_change & CyRI) | |
1276 | info->icount.rng++; | |
1277 | ||
1278 | wake_up_interruptible(&info->delta_msr_wait); | |
1279 | } | |
1280 | ||
1281 | if ((mdm_change & CyDCD) && (info->flags & ASYNC_CHECK_CD)) { | |
1282 | if (!(mdm_status & CyDCD)) { | |
1283 | tty_hangup(info->tty); | |
1284 | info->flags &= ~ASYNC_NORMAL_ACTIVE; | |
1285 | } | |
1286 | wake_up_interruptible(&info->open_wait); | |
1287 | } | |
1288 | if ((mdm_change & CyCTS) && (info->flags & ASYNC_CTS_FLOW)) { | |
1289 | if (info->tty->hw_stopped) { | |
1290 | if (mdm_status & CyCTS) { | |
1291 | /* cy_start isn't used | |
1292 | because... !!! */ | |
1293 | info->tty->hw_stopped = 0; | |
1294 | cy_writeb(base_addr + (CySRER << index), | |
1295 | readb(base_addr + (CySRER << index)) | | |
1296 | CyTxRdy); | |
1297 | tty_wakeup(info->tty); | |
02f1175c | 1298 | } |
ce97a097 JS |
1299 | } else { |
1300 | if (!(mdm_status & CyCTS)) { | |
1301 | /* cy_stop isn't used | |
1302 | because ... !!! */ | |
1303 | info->tty->hw_stopped = 1; | |
1304 | cy_writeb(base_addr + (CySRER << index), | |
1305 | readb(base_addr + (CySRER << index)) & | |
1306 | ~CyTxRdy); | |
02f1175c | 1307 | } |
e941027f | 1308 | } |
e941027f | 1309 | } |
ce97a097 JS |
1310 | /* if (mdm_change & CyDSR) { |
1311 | } | |
1312 | if (mdm_change & CyRI) { | |
1313 | }*/ | |
1314 | end: | |
1315 | /* end of service */ | |
1316 | cy_writeb(base_addr + (CyMIR << index), save_xir & 0x3f); | |
1317 | cy_writeb(base_addr + (CyCAR << index), save_car); | |
1318 | spin_unlock(&cinfo->card_lock); | |
e941027f JS |
1319 | } |
1320 | ||
1da177e4 LT |
1321 | /* The real interrupt service routine is called |
1322 | whenever the card wants its hand held--chars | |
1323 | received, out buffer empty, modem change, etc. | |
1324 | */ | |
02f1175c | 1325 | static irqreturn_t cyy_interrupt(int irq, void *dev_id) |
1da177e4 | 1326 | { |
02f1175c | 1327 | int status; |
f7429034 | 1328 | struct cyclades_card *cinfo = dev_id; |
02f1175c JS |
1329 | void __iomem *base_addr, *card_base_addr; |
1330 | int chip; | |
1331 | int index; | |
1332 | int too_many; | |
1333 | int had_work; | |
1334 | ||
f7429034 | 1335 | if (unlikely(cinfo == NULL)) { |
1da177e4 | 1336 | #ifdef CY_DEBUG_INTERRUPTS |
21719191 | 1337 | printk(KERN_DEBUG "cyy_interrupt: spurious interrupt %d\n",irq); |
1da177e4 | 1338 | #endif |
02f1175c JS |
1339 | return IRQ_NONE; /* spurious interrupt */ |
1340 | } | |
1341 | ||
1342 | card_base_addr = cinfo->base_addr; | |
1343 | index = cinfo->bus_index; | |
1344 | ||
f1e83c6c JS |
1345 | /* card was not initialized yet (e.g. DEBUG_SHIRQ) */ |
1346 | if (unlikely(card_base_addr == NULL)) | |
1347 | return IRQ_HANDLED; | |
1348 | ||
02f1175c JS |
1349 | /* This loop checks all chips in the card. Make a note whenever |
1350 | _any_ chip had some work to do, as this is considered an | |
1351 | indication that there will be more to do. Only when no chip | |
1352 | has any work does this outermost loop exit. | |
1353 | */ | |
1354 | do { | |
1355 | had_work = 0; | |
1356 | for (chip = 0; chip < cinfo->num_chips; chip++) { | |
1357 | base_addr = cinfo->base_addr + | |
1358 | (cy_chip_offset[chip] << index); | |
1359 | too_many = 0; | |
db05c3b1 | 1360 | while ((status = readb(base_addr + |
02f1175c JS |
1361 | (CySVRR << index))) != 0x00) { |
1362 | had_work++; | |
1363 | /* The purpose of the following test is to ensure that | |
1364 | no chip can monopolize the driver. This forces the | |
1365 | chips to be checked in a round-robin fashion (after | |
1366 | draining each of a bunch (1000) of characters). | |
1367 | */ | |
ce97a097 | 1368 | if (1000 < too_many++) |
02f1175c | 1369 | break; |
ce97a097 JS |
1370 | if (status & CySRReceive) /* rx intr */ |
1371 | cyy_chip_rx(cinfo, chip, base_addr); | |
1372 | if (status & CySRTransmit) /* tx intr */ | |
1373 | cyy_chip_tx(cinfo, chip, base_addr); | |
1374 | if (status & CySRModem) /* modem intr */ | |
1375 | cyy_chip_modem(cinfo, chip, base_addr); | |
02f1175c JS |
1376 | } |
1377 | } | |
1378 | } while (had_work); | |
1379 | ||
1380 | /* clear interrupts */ | |
1381 | spin_lock(&cinfo->card_lock); | |
1382 | cy_writeb(card_base_addr + (Cy_ClrIntr << index), 0); | |
1383 | /* Cy_ClrIntr is 0x1800 */ | |
1384 | spin_unlock(&cinfo->card_lock); | |
1385 | return IRQ_HANDLED; | |
1386 | } /* cyy_interrupt */ | |
1da177e4 LT |
1387 | |
1388 | /***********************************************************/ | |
1389 | /********* End of block of Cyclom-Y specific code **********/ | |
1390 | /******** Start of block of Cyclades-Z specific code *********/ | |
1391 | /***********************************************************/ | |
1392 | ||
1393 | static int | |
02f1175c | 1394 | cyz_fetch_msg(struct cyclades_card *cinfo, |
1a86b5e3 | 1395 | __u32 * channel, __u8 * cmd, __u32 * param) |
1da177e4 | 1396 | { |
02f1175c JS |
1397 | struct FIRM_ID __iomem *firm_id; |
1398 | struct ZFW_CTRL __iomem *zfw_ctrl; | |
1399 | struct BOARD_CTRL __iomem *board_ctrl; | |
1400 | unsigned long loc_doorbell; | |
1401 | ||
1402 | firm_id = cinfo->base_addr + ID_ADDRESS; | |
1403 | if (!ISZLOADED(*cinfo)) { | |
096dcfce | 1404 | return -1; |
02f1175c | 1405 | } |
db05c3b1 | 1406 | zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); |
02f1175c JS |
1407 | board_ctrl = &zfw_ctrl->board_ctrl; |
1408 | ||
db05c3b1 | 1409 | loc_doorbell = readl(&((struct RUNTIME_9060 __iomem *) |
02f1175c JS |
1410 | (cinfo->ctl_addr))->loc_doorbell); |
1411 | if (loc_doorbell) { | |
1412 | *cmd = (char)(0xff & loc_doorbell); | |
db05c3b1 JS |
1413 | *channel = readl(&board_ctrl->fwcmd_channel); |
1414 | *param = (__u32) readl(&board_ctrl->fwcmd_param); | |
02f1175c JS |
1415 | cy_writel(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))-> |
1416 | loc_doorbell, 0xffffffff); | |
1417 | return 1; | |
1418 | } | |
1419 | return 0; | |
1420 | } /* cyz_fetch_msg */ | |
1da177e4 LT |
1421 | |
1422 | static int | |
02f1175c | 1423 | cyz_issue_cmd(struct cyclades_card *cinfo, |
1a86b5e3 | 1424 | __u32 channel, __u8 cmd, __u32 param) |
1da177e4 | 1425 | { |
02f1175c JS |
1426 | struct FIRM_ID __iomem *firm_id; |
1427 | struct ZFW_CTRL __iomem *zfw_ctrl; | |
1428 | struct BOARD_CTRL __iomem *board_ctrl; | |
1a86b5e3 | 1429 | __u32 __iomem *pci_doorbell; |
02f1175c JS |
1430 | int index; |
1431 | ||
1432 | firm_id = cinfo->base_addr + ID_ADDRESS; | |
1433 | if (!ISZLOADED(*cinfo)) { | |
096dcfce | 1434 | return -1; |
02f1175c | 1435 | } |
db05c3b1 | 1436 | zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); |
02f1175c JS |
1437 | board_ctrl = &zfw_ctrl->board_ctrl; |
1438 | ||
1439 | index = 0; | |
1440 | pci_doorbell = | |
1441 | &((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->pci_doorbell; | |
db05c3b1 | 1442 | while ((readl(pci_doorbell) & 0xff) != 0) { |
02f1175c | 1443 | if (index++ == 1000) { |
db05c3b1 | 1444 | return (int)(readl(pci_doorbell) & 0xff); |
02f1175c JS |
1445 | } |
1446 | udelay(50L); | |
1447 | } | |
1448 | cy_writel(&board_ctrl->hcmd_channel, channel); | |
1449 | cy_writel(&board_ctrl->hcmd_param, param); | |
1450 | cy_writel(pci_doorbell, (long)cmd); | |
1451 | ||
096dcfce | 1452 | return 0; |
02f1175c | 1453 | } /* cyz_issue_cmd */ |
1da177e4 LT |
1454 | |
1455 | static void | |
ad39c300 JS |
1456 | cyz_handle_rx(struct cyclades_port *info, struct CH_CTRL __iomem *ch_ctrl, |
1457 | struct BUF_CTRL __iomem *buf_ctrl) | |
1da177e4 | 1458 | { |
875b206b | 1459 | struct cyclades_card *cinfo = info->card; |
02f1175c | 1460 | struct tty_struct *tty = info->tty; |
ad39c300 | 1461 | int char_count; |
02f1175c | 1462 | int len; |
1da177e4 | 1463 | #ifdef BLOCKMOVE |
ce71b0ff | 1464 | unsigned char *buf; |
1da177e4 | 1465 | #else |
02f1175c | 1466 | char data; |
1da177e4 | 1467 | #endif |
ad39c300 | 1468 | __u32 rx_put, rx_get, new_rx_get, rx_bufsize, rx_bufaddr; |
1da177e4 | 1469 | |
db05c3b1 JS |
1470 | rx_get = new_rx_get = readl(&buf_ctrl->rx_get); |
1471 | rx_put = readl(&buf_ctrl->rx_put); | |
1472 | rx_bufsize = readl(&buf_ctrl->rx_bufsize); | |
1473 | rx_bufaddr = readl(&buf_ctrl->rx_bufaddr); | |
02f1175c JS |
1474 | if (rx_put >= rx_get) |
1475 | char_count = rx_put - rx_get; | |
1476 | else | |
1477 | char_count = rx_put - rx_get + rx_bufsize; | |
1da177e4 | 1478 | |
02f1175c | 1479 | if (char_count) { |
1da177e4 | 1480 | #ifdef CY_ENABLE_MONITORING |
02f1175c JS |
1481 | info->mon.int_count++; |
1482 | info->mon.char_count += char_count; | |
1483 | if (char_count > info->mon.char_max) | |
1484 | info->mon.char_max = char_count; | |
1485 | info->mon.char_last = char_count; | |
1da177e4 | 1486 | #endif |
f7429034 | 1487 | if (tty == NULL) { |
02f1175c JS |
1488 | /* flush received characters */ |
1489 | new_rx_get = (new_rx_get + char_count) & | |
1490 | (rx_bufsize - 1); | |
1491 | info->rflush_count++; | |
1492 | } else { | |
1da177e4 | 1493 | #ifdef BLOCKMOVE |
02f1175c JS |
1494 | /* we'd like to use memcpy(t, f, n) and memset(s, c, count) |
1495 | for performance, but because of buffer boundaries, there | |
1496 | may be several steps to the operation */ | |
ce71b0ff JS |
1497 | while (1) { |
1498 | len = tty_prepare_flip_string(tty, &buf, | |
1499 | char_count); | |
1500 | if (!len) | |
1501 | break; | |
1502 | ||
1503 | len = min_t(unsigned int, min(len, char_count), | |
1504 | rx_bufsize - new_rx_get); | |
1505 | ||
1506 | memcpy_fromio(buf, cinfo->base_addr + | |
1507 | rx_bufaddr + new_rx_get, len); | |
1508 | ||
1509 | new_rx_get = (new_rx_get + len) & | |
02f1175c | 1510 | (rx_bufsize - 1); |
ce71b0ff JS |
1511 | char_count -= len; |
1512 | info->icount.rx += len; | |
1513 | info->idle_stats.recv_bytes += len; | |
02f1175c | 1514 | } |
1da177e4 | 1515 | #else |
02f1175c JS |
1516 | len = tty_buffer_request_room(tty, char_count); |
1517 | while (len--) { | |
db05c3b1 | 1518 | data = readb(cinfo->base_addr + rx_bufaddr + |
02f1175c JS |
1519 | new_rx_get); |
1520 | new_rx_get = (new_rx_get + 1)& (rx_bufsize - 1); | |
1521 | tty_insert_flip_char(tty, data, TTY_NORMAL); | |
1522 | info->idle_stats.recv_bytes++; | |
1523 | info->icount.rx++; | |
1524 | } | |
1da177e4 LT |
1525 | #endif |
1526 | #ifdef CONFIG_CYZ_INTR | |
02f1175c JS |
1527 | /* Recalculate the number of chars in the RX buffer and issue |
1528 | a cmd in case it's higher than the RX high water mark */ | |
db05c3b1 | 1529 | rx_put = readl(&buf_ctrl->rx_put); |
02f1175c JS |
1530 | if (rx_put >= rx_get) |
1531 | char_count = rx_put - rx_get; | |
1532 | else | |
1533 | char_count = rx_put - rx_get + rx_bufsize; | |
ebafeeff JS |
1534 | if (char_count >= (int)readl(&buf_ctrl->rx_threshold) && |
1535 | !timer_pending(&cyz_rx_full_timer[ | |
1536 | info->line])) | |
1537 | mod_timer(&cyz_rx_full_timer[info->line], | |
1538 | jiffies + 1); | |
1da177e4 | 1539 | #endif |
02f1175c JS |
1540 | info->idle_stats.recv_idle = jiffies; |
1541 | tty_schedule_flip(tty); | |
1542 | } | |
1543 | /* Update rx_get */ | |
1544 | cy_writel(&buf_ctrl->rx_get, new_rx_get); | |
1da177e4 | 1545 | } |
1da177e4 LT |
1546 | } |
1547 | ||
1548 | static void | |
ad39c300 JS |
1549 | cyz_handle_tx(struct cyclades_port *info, struct CH_CTRL __iomem *ch_ctrl, |
1550 | struct BUF_CTRL __iomem *buf_ctrl) | |
1da177e4 | 1551 | { |
875b206b | 1552 | struct cyclades_card *cinfo = info->card; |
02f1175c JS |
1553 | struct tty_struct *tty = info->tty; |
1554 | char data; | |
ad39c300 | 1555 | int char_count; |
1da177e4 | 1556 | #ifdef BLOCKMOVE |
02f1175c | 1557 | int small_count; |
1da177e4 | 1558 | #endif |
ad39c300 | 1559 | __u32 tx_put, tx_get, tx_bufsize, tx_bufaddr; |
1da177e4 | 1560 | |
02f1175c JS |
1561 | if (info->xmit_cnt <= 0) /* Nothing to transmit */ |
1562 | return; | |
1da177e4 | 1563 | |
db05c3b1 JS |
1564 | tx_get = readl(&buf_ctrl->tx_get); |
1565 | tx_put = readl(&buf_ctrl->tx_put); | |
1566 | tx_bufsize = readl(&buf_ctrl->tx_bufsize); | |
1567 | tx_bufaddr = readl(&buf_ctrl->tx_bufaddr); | |
02f1175c JS |
1568 | if (tx_put >= tx_get) |
1569 | char_count = tx_get - tx_put - 1 + tx_bufsize; | |
1570 | else | |
1571 | char_count = tx_get - tx_put - 1; | |
1da177e4 | 1572 | |
02f1175c | 1573 | if (char_count) { |
1da177e4 | 1574 | |
f7429034 | 1575 | if (tty == NULL) |
02f1175c | 1576 | goto ztxdone; |
1da177e4 | 1577 | |
02f1175c JS |
1578 | if (info->x_char) { /* send special char */ |
1579 | data = info->x_char; | |
1da177e4 | 1580 | |
02f1175c JS |
1581 | cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data); |
1582 | tx_put = (tx_put + 1) & (tx_bufsize - 1); | |
1583 | info->x_char = 0; | |
1584 | char_count--; | |
1585 | info->icount.tx++; | |
02f1175c | 1586 | } |
1da177e4 | 1587 | #ifdef BLOCKMOVE |
02f1175c JS |
1588 | while (0 < (small_count = min_t(unsigned int, |
1589 | tx_bufsize - tx_put, min_t(unsigned int, | |
1590 | (SERIAL_XMIT_SIZE - info->xmit_tail), | |
1591 | min_t(unsigned int, info->xmit_cnt, | |
1592 | char_count))))) { | |
1593 | ||
1594 | memcpy_toio((char *)(cinfo->base_addr + tx_bufaddr + | |
1595 | tx_put), | |
1596 | &info->xmit_buf[info->xmit_tail], | |
1597 | small_count); | |
1598 | ||
1599 | tx_put = (tx_put + small_count) & (tx_bufsize - 1); | |
1600 | char_count -= small_count; | |
1601 | info->icount.tx += small_count; | |
1602 | info->xmit_cnt -= small_count; | |
1603 | info->xmit_tail = (info->xmit_tail + small_count) & | |
1604 | (SERIAL_XMIT_SIZE - 1); | |
02f1175c | 1605 | } |
1da177e4 | 1606 | #else |
02f1175c JS |
1607 | while (info->xmit_cnt && char_count) { |
1608 | data = info->xmit_buf[info->xmit_tail]; | |
1609 | info->xmit_cnt--; | |
1610 | info->xmit_tail = (info->xmit_tail + 1) & | |
1611 | (SERIAL_XMIT_SIZE - 1); | |
1612 | ||
1613 | cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data); | |
1614 | tx_put = (tx_put + 1) & (tx_bufsize - 1); | |
1615 | char_count--; | |
1616 | info->icount.tx++; | |
02f1175c | 1617 | } |
1da177e4 | 1618 | #endif |
02f1175c | 1619 | ztxdone: |
ebafeeff | 1620 | tty_wakeup(tty); |
02f1175c JS |
1621 | /* Update tx_put */ |
1622 | cy_writel(&buf_ctrl->tx_put, tx_put); | |
1da177e4 | 1623 | } |
1da177e4 LT |
1624 | } |
1625 | ||
02f1175c | 1626 | static void cyz_handle_cmd(struct cyclades_card *cinfo) |
1da177e4 | 1627 | { |
02f1175c JS |
1628 | struct tty_struct *tty; |
1629 | struct cyclades_port *info; | |
ad39c300 JS |
1630 | static struct FIRM_ID __iomem *firm_id; |
1631 | static struct ZFW_CTRL __iomem *zfw_ctrl; | |
1632 | static struct BOARD_CTRL __iomem *board_ctrl; | |
1633 | static struct CH_CTRL __iomem *ch_ctrl; | |
1634 | static struct BUF_CTRL __iomem *buf_ctrl; | |
1a86b5e3 KK |
1635 | __u32 channel; |
1636 | __u8 cmd; | |
1637 | __u32 param; | |
1638 | __u32 hw_ver, fw_ver; | |
02f1175c JS |
1639 | int special_count; |
1640 | int delta_count; | |
1641 | ||
1642 | firm_id = cinfo->base_addr + ID_ADDRESS; | |
db05c3b1 | 1643 | zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); |
02f1175c | 1644 | board_ctrl = &zfw_ctrl->board_ctrl; |
db05c3b1 JS |
1645 | fw_ver = readl(&board_ctrl->fw_version); |
1646 | hw_ver = readl(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))-> | |
02f1175c JS |
1647 | mail_box_0); |
1648 | ||
1649 | while (cyz_fetch_msg(cinfo, &channel, &cmd, ¶m) == 1) { | |
1650 | special_count = 0; | |
1651 | delta_count = 0; | |
dd025c0c | 1652 | info = &cinfo->ports[channel]; |
f7429034 | 1653 | if ((tty = info->tty) == NULL) |
02f1175c | 1654 | continue; |
f7429034 | 1655 | |
02f1175c JS |
1656 | ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]); |
1657 | buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]); | |
1658 | ||
1659 | switch (cmd) { | |
1660 | case C_CM_PR_ERROR: | |
1661 | tty_insert_flip_char(tty, 0, TTY_PARITY); | |
1662 | info->icount.rx++; | |
1663 | special_count++; | |
1664 | break; | |
1665 | case C_CM_FR_ERROR: | |
1666 | tty_insert_flip_char(tty, 0, TTY_FRAME); | |
1667 | info->icount.rx++; | |
1668 | special_count++; | |
1669 | break; | |
1670 | case C_CM_RXBRK: | |
1671 | tty_insert_flip_char(tty, 0, TTY_BREAK); | |
1672 | info->icount.rx++; | |
1673 | special_count++; | |
1674 | break; | |
1675 | case C_CM_MDCD: | |
1676 | info->icount.dcd++; | |
1677 | delta_count++; | |
1678 | if (info->flags & ASYNC_CHECK_CD) { | |
1679 | if ((fw_ver > 241 ? ((u_long) param) : | |
db05c3b1 | 1680 | readl(&ch_ctrl->rs_status)) & |
02f1175c | 1681 | C_RS_DCD) { |
ebafeeff | 1682 | wake_up_interruptible(&info->open_wait); |
02f1175c | 1683 | } else { |
ebafeeff JS |
1684 | tty_hangup(info->tty); |
1685 | wake_up_interruptible(&info->open_wait); | |
1686 | info->flags &= ~ASYNC_NORMAL_ACTIVE; | |
02f1175c JS |
1687 | } |
1688 | } | |
1689 | break; | |
1690 | case C_CM_MCTS: | |
1691 | info->icount.cts++; | |
1692 | delta_count++; | |
1693 | break; | |
1694 | case C_CM_MRI: | |
1695 | info->icount.rng++; | |
1696 | delta_count++; | |
1697 | break; | |
1698 | case C_CM_MDSR: | |
1699 | info->icount.dsr++; | |
1700 | delta_count++; | |
1701 | break; | |
1da177e4 | 1702 | #ifdef Z_WAKE |
02f1175c | 1703 | case C_CM_IOCTLW: |
ebafeeff | 1704 | complete(&info->shutdown_wait); |
02f1175c | 1705 | break; |
1da177e4 LT |
1706 | #endif |
1707 | #ifdef CONFIG_CYZ_INTR | |
02f1175c JS |
1708 | case C_CM_RXHIWM: |
1709 | case C_CM_RXNNDT: | |
1710 | case C_CM_INTBACK2: | |
1711 | /* Reception Interrupt */ | |
1da177e4 | 1712 | #ifdef CY_DEBUG_INTERRUPTS |
21719191 JS |
1713 | printk(KERN_DEBUG "cyz_interrupt: rcvd intr, card %d, " |
1714 | "port %ld\n", info->card, channel); | |
1da177e4 | 1715 | #endif |
02f1175c JS |
1716 | cyz_handle_rx(info, ch_ctrl, buf_ctrl); |
1717 | break; | |
1718 | case C_CM_TXBEMPTY: | |
1719 | case C_CM_TXLOWWM: | |
1720 | case C_CM_INTBACK: | |
1721 | /* Transmission Interrupt */ | |
1da177e4 | 1722 | #ifdef CY_DEBUG_INTERRUPTS |
21719191 JS |
1723 | printk(KERN_DEBUG "cyz_interrupt: xmit intr, card %d, " |
1724 | "port %ld\n", info->card, channel); | |
1da177e4 | 1725 | #endif |
02f1175c JS |
1726 | cyz_handle_tx(info, ch_ctrl, buf_ctrl); |
1727 | break; | |
1728 | #endif /* CONFIG_CYZ_INTR */ | |
1729 | case C_CM_FATAL: | |
1730 | /* should do something with this !!! */ | |
1731 | break; | |
1732 | default: | |
1733 | break; | |
1734 | } | |
1735 | if (delta_count) | |
ebafeeff | 1736 | wake_up_interruptible(&info->delta_msr_wait); |
02f1175c JS |
1737 | if (special_count) |
1738 | tty_schedule_flip(tty); | |
1da177e4 | 1739 | } |
1da177e4 LT |
1740 | } |
1741 | ||
1742 | #ifdef CONFIG_CYZ_INTR | |
02f1175c | 1743 | static irqreturn_t cyz_interrupt(int irq, void *dev_id) |
1da177e4 | 1744 | { |
f7429034 | 1745 | struct cyclades_card *cinfo = dev_id; |
1da177e4 | 1746 | |
f7429034 | 1747 | if (unlikely(cinfo == NULL)) { |
1da177e4 | 1748 | #ifdef CY_DEBUG_INTERRUPTS |
21719191 | 1749 | printk(KERN_DEBUG "cyz_interrupt: spurious interrupt %d\n",irq); |
1da177e4 | 1750 | #endif |
02f1175c JS |
1751 | return IRQ_NONE; /* spurious interrupt */ |
1752 | } | |
1da177e4 | 1753 | |
f7429034 | 1754 | if (unlikely(!ISZLOADED(*cinfo))) { |
1da177e4 | 1755 | #ifdef CY_DEBUG_INTERRUPTS |
21719191 JS |
1756 | printk(KERN_DEBUG "cyz_interrupt: board not yet loaded " |
1757 | "(IRQ%d).\n", irq); | |
1da177e4 | 1758 | #endif |
02f1175c JS |
1759 | return IRQ_NONE; |
1760 | } | |
1da177e4 | 1761 | |
02f1175c JS |
1762 | /* Handle the interrupts */ |
1763 | cyz_handle_cmd(cinfo); | |
1da177e4 | 1764 | |
02f1175c JS |
1765 | return IRQ_HANDLED; |
1766 | } /* cyz_interrupt */ | |
1da177e4 | 1767 | |
02f1175c | 1768 | static void cyz_rx_restart(unsigned long arg) |
1da177e4 | 1769 | { |
02f1175c | 1770 | struct cyclades_port *info = (struct cyclades_port *)arg; |
875b206b | 1771 | struct cyclades_card *card = info->card; |
02f1175c | 1772 | int retval; |
875b206b | 1773 | __u32 channel = info->line - card->first_line; |
02f1175c JS |
1774 | unsigned long flags; |
1775 | ||
9fa1b3b1 | 1776 | spin_lock_irqsave(&card->card_lock, flags); |
875b206b | 1777 | retval = cyz_issue_cmd(card, channel, C_CM_INTBACK2, 0L); |
02f1175c | 1778 | if (retval != 0) { |
21719191 | 1779 | printk(KERN_ERR "cyc:cyz_rx_restart retval on ttyC%d was %x\n", |
02f1175c JS |
1780 | info->line, retval); |
1781 | } | |
9fa1b3b1 | 1782 | spin_unlock_irqrestore(&card->card_lock, flags); |
1da177e4 LT |
1783 | } |
1784 | ||
02f1175c | 1785 | #else /* CONFIG_CYZ_INTR */ |
1da177e4 | 1786 | |
02f1175c | 1787 | static void cyz_poll(unsigned long arg) |
1da177e4 | 1788 | { |
02f1175c JS |
1789 | struct cyclades_card *cinfo; |
1790 | struct cyclades_port *info; | |
1791 | struct tty_struct *tty; | |
c4923b4f JS |
1792 | struct FIRM_ID __iomem *firm_id; |
1793 | struct ZFW_CTRL __iomem *zfw_ctrl; | |
1794 | struct BOARD_CTRL __iomem *board_ctrl; | |
1795 | struct CH_CTRL __iomem *ch_ctrl; | |
1796 | struct BUF_CTRL __iomem *buf_ctrl; | |
b7050906 | 1797 | unsigned long expires = jiffies + HZ; |
02f1175c | 1798 | int card, port; |
1da177e4 | 1799 | |
02f1175c JS |
1800 | for (card = 0; card < NR_CARDS; card++) { |
1801 | cinfo = &cy_card[card]; | |
1802 | ||
1803 | if (!IS_CYC_Z(*cinfo)) | |
1804 | continue; | |
1805 | if (!ISZLOADED(*cinfo)) | |
1806 | continue; | |
1807 | ||
1808 | firm_id = cinfo->base_addr + ID_ADDRESS; | |
1809 | zfw_ctrl = cinfo->base_addr + | |
db05c3b1 | 1810 | (readl(&firm_id->zfwctrl_addr) & 0xfffff); |
02f1175c | 1811 | board_ctrl = &(zfw_ctrl->board_ctrl); |
1da177e4 LT |
1812 | |
1813 | /* Skip first polling cycle to avoid racing conditions with the FW */ | |
02f1175c | 1814 | if (!cinfo->intr_enabled) { |
db05c3b1 | 1815 | cinfo->nports = (int)readl(&board_ctrl->n_channel); |
02f1175c JS |
1816 | cinfo->intr_enabled = 1; |
1817 | continue; | |
1818 | } | |
1da177e4 | 1819 | |
02f1175c | 1820 | cyz_handle_cmd(cinfo); |
1da177e4 | 1821 | |
02f1175c | 1822 | for (port = 0; port < cinfo->nports; port++) { |
dd025c0c | 1823 | info = &cinfo->ports[port]; |
02f1175c JS |
1824 | tty = info->tty; |
1825 | ch_ctrl = &(zfw_ctrl->ch_ctrl[port]); | |
1826 | buf_ctrl = &(zfw_ctrl->buf_ctrl[port]); | |
1da177e4 | 1827 | |
02f1175c JS |
1828 | if (!info->throttle) |
1829 | cyz_handle_rx(info, ch_ctrl, buf_ctrl); | |
1830 | cyz_handle_tx(info, ch_ctrl, buf_ctrl); | |
1831 | } | |
1832 | /* poll every 'cyz_polling_cycle' period */ | |
b7050906 | 1833 | expires = jiffies + cyz_polling_cycle; |
1da177e4 | 1834 | } |
b7050906 | 1835 | mod_timer(&cyz_timerlist, expires); |
02f1175c | 1836 | } /* cyz_poll */ |
1da177e4 | 1837 | |
02f1175c | 1838 | #endif /* CONFIG_CYZ_INTR */ |
1da177e4 LT |
1839 | |
1840 | /********** End of block of Cyclades-Z specific code *********/ | |
1841 | /***********************************************************/ | |
1842 | ||
1da177e4 LT |
1843 | /* This is called whenever a port becomes active; |
1844 | interrupts are enabled and DTR & RTS are turned on. | |
1845 | */ | |
02f1175c | 1846 | static int startup(struct cyclades_port *info) |
1da177e4 | 1847 | { |
875b206b | 1848 | struct cyclades_card *card; |
02f1175c JS |
1849 | unsigned long flags; |
1850 | int retval = 0; | |
1851 | void __iomem *base_addr; | |
875b206b | 1852 | int chip, channel, index; |
02f1175c | 1853 | unsigned long page; |
1da177e4 | 1854 | |
02f1175c | 1855 | card = info->card; |
875b206b | 1856 | channel = info->line - card->first_line; |
1da177e4 | 1857 | |
02f1175c JS |
1858 | page = get_zeroed_page(GFP_KERNEL); |
1859 | if (!page) | |
1860 | return -ENOMEM; | |
1da177e4 | 1861 | |
9fa1b3b1 | 1862 | spin_lock_irqsave(&card->card_lock, flags); |
1da177e4 | 1863 | |
02f1175c JS |
1864 | if (info->flags & ASYNC_INITIALIZED) { |
1865 | free_page(page); | |
1866 | goto errout; | |
1867 | } | |
1da177e4 | 1868 | |
02f1175c JS |
1869 | if (!info->type) { |
1870 | if (info->tty) { | |
1871 | set_bit(TTY_IO_ERROR, &info->tty->flags); | |
1872 | } | |
1873 | free_page(page); | |
1874 | goto errout; | |
1875 | } | |
1da177e4 | 1876 | |
02f1175c JS |
1877 | if (info->xmit_buf) |
1878 | free_page(page); | |
1879 | else | |
1880 | info->xmit_buf = (unsigned char *)page; | |
1da177e4 | 1881 | |
9fa1b3b1 | 1882 | spin_unlock_irqrestore(&card->card_lock, flags); |
1da177e4 | 1883 | |
02f1175c | 1884 | set_line_char(info); |
1da177e4 | 1885 | |
875b206b | 1886 | if (!IS_CYC_Z(*card)) { |
02f1175c JS |
1887 | chip = channel >> 2; |
1888 | channel &= 0x03; | |
875b206b JS |
1889 | index = card->bus_index; |
1890 | base_addr = card->base_addr + (cy_chip_offset[chip] << index); | |
1da177e4 LT |
1891 | |
1892 | #ifdef CY_DEBUG_OPEN | |
21719191 JS |
1893 | printk(KERN_DEBUG "cyc startup card %d, chip %d, channel %d, " |
1894 | "base_addr %p\n", | |
1895 | card, chip, channel, base_addr); | |
1da177e4 | 1896 | #endif |
9fa1b3b1 | 1897 | spin_lock_irqsave(&card->card_lock, flags); |
1da177e4 | 1898 | |
02f1175c | 1899 | cy_writeb(base_addr + (CyCAR << index), (u_char) channel); |
1da177e4 | 1900 | |
02f1175c JS |
1901 | cy_writeb(base_addr + (CyRTPR << index), |
1902 | (info->default_timeout ? info->default_timeout : 0x02)); | |
1903 | /* 10ms rx timeout */ | |
1da177e4 | 1904 | |
02f1175c JS |
1905 | cyy_issue_cmd(base_addr, CyCHAN_CTL | CyENB_RCVR | CyENB_XMTR, |
1906 | index); | |
1da177e4 | 1907 | |
02f1175c JS |
1908 | cy_writeb(base_addr + (CyCAR << index), (u_char) channel); |
1909 | cy_writeb(base_addr + (CyMSVR1 << index), CyRTS); | |
1910 | cy_writeb(base_addr + (CyMSVR2 << index), CyDTR); | |
1da177e4 LT |
1911 | |
1912 | #ifdef CY_DEBUG_DTR | |
21719191 JS |
1913 | printk(KERN_DEBUG "cyc:startup raising DTR\n"); |
1914 | printk(KERN_DEBUG " status: 0x%x, 0x%x\n", | |
db05c3b1 JS |
1915 | readb(base_addr + (CyMSVR1 << index)), |
1916 | readb(base_addr + (CyMSVR2 << index))); | |
1da177e4 LT |
1917 | #endif |
1918 | ||
02f1175c | 1919 | cy_writeb(base_addr + (CySRER << index), |
db05c3b1 | 1920 | readb(base_addr + (CySRER << index)) | CyRxData); |
02f1175c | 1921 | info->flags |= ASYNC_INITIALIZED; |
1da177e4 | 1922 | |
02f1175c JS |
1923 | if (info->tty) { |
1924 | clear_bit(TTY_IO_ERROR, &info->tty->flags); | |
1925 | } | |
1926 | info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; | |
1927 | info->breakon = info->breakoff = 0; | |
1928 | memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats)); | |
1929 | info->idle_stats.in_use = | |
1930 | info->idle_stats.recv_idle = | |
1931 | info->idle_stats.xmit_idle = jiffies; | |
1da177e4 | 1932 | |
9fa1b3b1 | 1933 | spin_unlock_irqrestore(&card->card_lock, flags); |
1da177e4 | 1934 | |
02f1175c JS |
1935 | } else { |
1936 | struct FIRM_ID __iomem *firm_id; | |
1937 | struct ZFW_CTRL __iomem *zfw_ctrl; | |
1938 | struct BOARD_CTRL __iomem *board_ctrl; | |
1939 | struct CH_CTRL __iomem *ch_ctrl; | |
1da177e4 | 1940 | |
875b206b | 1941 | base_addr = card->base_addr; |
1da177e4 | 1942 | |
02f1175c | 1943 | firm_id = base_addr + ID_ADDRESS; |
875b206b | 1944 | if (!ISZLOADED(*card)) { |
02f1175c JS |
1945 | return -ENODEV; |
1946 | } | |
1da177e4 | 1947 | |
875b206b | 1948 | zfw_ctrl = card->base_addr + |
db05c3b1 | 1949 | (readl(&firm_id->zfwctrl_addr) & 0xfffff); |
02f1175c JS |
1950 | board_ctrl = &zfw_ctrl->board_ctrl; |
1951 | ch_ctrl = zfw_ctrl->ch_ctrl; | |
1da177e4 LT |
1952 | |
1953 | #ifdef CY_DEBUG_OPEN | |
21719191 JS |
1954 | printk(KERN_DEBUG "cyc startup Z card %d, channel %d, " |
1955 | "base_addr %p\n", card, channel, base_addr); | |
1da177e4 | 1956 | #endif |
9fa1b3b1 | 1957 | spin_lock_irqsave(&card->card_lock, flags); |
1da177e4 | 1958 | |
02f1175c | 1959 | cy_writel(&ch_ctrl[channel].op_mode, C_CH_ENABLE); |
1da177e4 LT |
1960 | #ifdef Z_WAKE |
1961 | #ifdef CONFIG_CYZ_INTR | |
02f1175c JS |
1962 | cy_writel(&ch_ctrl[channel].intr_enable, |
1963 | C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM | | |
1964 | C_IN_RXNNDT | C_IN_IOCTLW | C_IN_MDCD); | |
1da177e4 | 1965 | #else |
02f1175c JS |
1966 | cy_writel(&ch_ctrl[channel].intr_enable, |
1967 | C_IN_IOCTLW | C_IN_MDCD); | |
1968 | #endif /* CONFIG_CYZ_INTR */ | |
1da177e4 LT |
1969 | #else |
1970 | #ifdef CONFIG_CYZ_INTR | |
02f1175c JS |
1971 | cy_writel(&ch_ctrl[channel].intr_enable, |
1972 | C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM | | |
1973 | C_IN_RXNNDT | C_IN_MDCD); | |
1da177e4 | 1974 | #else |
02f1175c JS |
1975 | cy_writel(&ch_ctrl[channel].intr_enable, C_IN_MDCD); |
1976 | #endif /* CONFIG_CYZ_INTR */ | |
1977 | #endif /* Z_WAKE */ | |
1978 | ||
875b206b | 1979 | retval = cyz_issue_cmd(card, channel, C_CM_IOCTL, 0L); |
02f1175c | 1980 | if (retval != 0) { |
21719191 JS |
1981 | printk(KERN_ERR "cyc:startup(1) retval on ttyC%d was " |
1982 | "%x\n", info->line, retval); | |
02f1175c | 1983 | } |
1da177e4 | 1984 | |
02f1175c | 1985 | /* Flush RX buffers before raising DTR and RTS */ |
875b206b | 1986 | retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_RX, 0L); |
02f1175c | 1987 | if (retval != 0) { |
21719191 JS |
1988 | printk(KERN_ERR "cyc:startup(2) retval on ttyC%d was " |
1989 | "%x\n", info->line, retval); | |
02f1175c | 1990 | } |
1da177e4 | 1991 | |
02f1175c JS |
1992 | /* set timeout !!! */ |
1993 | /* set RTS and DTR !!! */ | |
1994 | cy_writel(&ch_ctrl[channel].rs_control, | |
db05c3b1 | 1995 | readl(&ch_ctrl[channel].rs_control) | C_RS_RTS | |
02f1175c | 1996 | C_RS_DTR); |
9fa1b3b1 | 1997 | retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L); |
02f1175c | 1998 | if (retval != 0) { |
21719191 JS |
1999 | printk(KERN_ERR "cyc:startup(3) retval on ttyC%d was " |
2000 | "%x\n", info->line, retval); | |
02f1175c | 2001 | } |
1da177e4 | 2002 | #ifdef CY_DEBUG_DTR |
21719191 | 2003 | printk(KERN_DEBUG "cyc:startup raising Z DTR\n"); |
1da177e4 LT |
2004 | #endif |
2005 | ||
02f1175c JS |
2006 | /* enable send, recv, modem !!! */ |
2007 | ||
2008 | info->flags |= ASYNC_INITIALIZED; | |
2009 | if (info->tty) { | |
2010 | clear_bit(TTY_IO_ERROR, &info->tty->flags); | |
2011 | } | |
2012 | info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; | |
2013 | info->breakon = info->breakoff = 0; | |
2014 | memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats)); | |
2015 | info->idle_stats.in_use = | |
2016 | info->idle_stats.recv_idle = | |
2017 | info->idle_stats.xmit_idle = jiffies; | |
1da177e4 | 2018 | |
9fa1b3b1 | 2019 | spin_unlock_irqrestore(&card->card_lock, flags); |
1da177e4 | 2020 | } |
1da177e4 LT |
2021 | |
2022 | #ifdef CY_DEBUG_OPEN | |
21719191 | 2023 | printk(KERN_DEBUG "cyc startup done\n"); |
1da177e4 LT |
2024 | #endif |
2025 | return 0; | |
2026 | ||
2027 | errout: | |
9fa1b3b1 | 2028 | spin_unlock_irqrestore(&card->card_lock, flags); |
1da177e4 | 2029 | return retval; |
02f1175c | 2030 | } /* startup */ |
1da177e4 | 2031 | |
02f1175c | 2032 | static void start_xmit(struct cyclades_port *info) |
1da177e4 | 2033 | { |
875b206b | 2034 | struct cyclades_card *card; |
02f1175c JS |
2035 | unsigned long flags; |
2036 | void __iomem *base_addr; | |
875b206b | 2037 | int chip, channel, index; |
1da177e4 | 2038 | |
02f1175c | 2039 | card = info->card; |
875b206b JS |
2040 | channel = info->line - card->first_line; |
2041 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
2042 | chip = channel >> 2; |
2043 | channel &= 0x03; | |
875b206b JS |
2044 | index = card->bus_index; |
2045 | base_addr = card->base_addr + (cy_chip_offset[chip] << index); | |
02f1175c | 2046 | |
9fa1b3b1 | 2047 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
2048 | cy_writeb(base_addr + (CyCAR << index), channel); |
2049 | cy_writeb(base_addr + (CySRER << index), | |
db05c3b1 | 2050 | readb(base_addr + (CySRER << index)) | CyTxRdy); |
9fa1b3b1 | 2051 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c | 2052 | } else { |
1da177e4 | 2053 | #ifdef CONFIG_CYZ_INTR |
02f1175c | 2054 | int retval; |
1da177e4 | 2055 | |
9fa1b3b1 | 2056 | spin_lock_irqsave(&card->card_lock, flags); |
875b206b | 2057 | retval = cyz_issue_cmd(card, channel, C_CM_INTBACK, 0L); |
02f1175c | 2058 | if (retval != 0) { |
21719191 JS |
2059 | printk(KERN_ERR "cyc:start_xmit retval on ttyC%d was " |
2060 | "%x\n", info->line, retval); | |
02f1175c | 2061 | } |
9fa1b3b1 | 2062 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
2063 | #else /* CONFIG_CYZ_INTR */ |
2064 | /* Don't have to do anything at this time */ | |
2065 | #endif /* CONFIG_CYZ_INTR */ | |
2066 | } | |
2067 | } /* start_xmit */ | |
1da177e4 LT |
2068 | |
2069 | /* | |
2070 | * This routine shuts down a serial port; interrupts are disabled, | |
2071 | * and DTR is dropped if the hangup on close termio flag is on. | |
2072 | */ | |
02f1175c | 2073 | static void shutdown(struct cyclades_port *info) |
1da177e4 | 2074 | { |
875b206b | 2075 | struct cyclades_card *card; |
02f1175c JS |
2076 | unsigned long flags; |
2077 | void __iomem *base_addr; | |
875b206b | 2078 | int chip, channel, index; |
02f1175c JS |
2079 | |
2080 | if (!(info->flags & ASYNC_INITIALIZED)) { | |
2081 | return; | |
2082 | } | |
2083 | ||
2084 | card = info->card; | |
875b206b JS |
2085 | channel = info->line - card->first_line; |
2086 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
2087 | chip = channel >> 2; |
2088 | channel &= 0x03; | |
875b206b JS |
2089 | index = card->bus_index; |
2090 | base_addr = card->base_addr + (cy_chip_offset[chip] << index); | |
1da177e4 LT |
2091 | |
2092 | #ifdef CY_DEBUG_OPEN | |
21719191 JS |
2093 | printk(KERN_DEBUG "cyc shutdown Y card %d, chip %d, " |
2094 | "channel %d, base_addr %p\n", | |
2095 | card, chip, channel, base_addr); | |
1da177e4 LT |
2096 | #endif |
2097 | ||
9fa1b3b1 | 2098 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
2099 | |
2100 | /* Clear delta_msr_wait queue to avoid mem leaks. */ | |
2101 | wake_up_interruptible(&info->delta_msr_wait); | |
1da177e4 | 2102 | |
02f1175c JS |
2103 | if (info->xmit_buf) { |
2104 | unsigned char *temp; | |
2105 | temp = info->xmit_buf; | |
2106 | info->xmit_buf = NULL; | |
2107 | free_page((unsigned long)temp); | |
2108 | } | |
2109 | cy_writeb(base_addr + (CyCAR << index), (u_char) channel); | |
2110 | if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) { | |
2111 | cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS); | |
2112 | cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR); | |
1da177e4 | 2113 | #ifdef CY_DEBUG_DTR |
21719191 JS |
2114 | printk(KERN_DEBUG "cyc shutdown dropping DTR\n"); |
2115 | printk(KERN_DEBUG " status: 0x%x, 0x%x\n", | |
db05c3b1 JS |
2116 | readb(base_addr + (CyMSVR1 << index)), |
2117 | readb(base_addr + (CyMSVR2 << index))); | |
1da177e4 | 2118 | #endif |
02f1175c JS |
2119 | } |
2120 | cyy_issue_cmd(base_addr, CyCHAN_CTL | CyDIS_RCVR, index); | |
2121 | /* it may be appropriate to clear _XMIT at | |
2122 | some later date (after testing)!!! */ | |
2123 | ||
2124 | if (info->tty) { | |
2125 | set_bit(TTY_IO_ERROR, &info->tty->flags); | |
2126 | } | |
2127 | info->flags &= ~ASYNC_INITIALIZED; | |
9fa1b3b1 | 2128 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
2129 | } else { |
2130 | struct FIRM_ID __iomem *firm_id; | |
2131 | struct ZFW_CTRL __iomem *zfw_ctrl; | |
2132 | struct BOARD_CTRL __iomem *board_ctrl; | |
2133 | struct CH_CTRL __iomem *ch_ctrl; | |
2134 | int retval; | |
2135 | ||
875b206b | 2136 | base_addr = card->base_addr; |
1da177e4 | 2137 | #ifdef CY_DEBUG_OPEN |
21719191 JS |
2138 | printk(KERN_DEBUG "cyc shutdown Z card %d, channel %d, " |
2139 | "base_addr %p\n", card, channel, base_addr); | |
1da177e4 LT |
2140 | #endif |
2141 | ||
02f1175c | 2142 | firm_id = base_addr + ID_ADDRESS; |
875b206b | 2143 | if (!ISZLOADED(*card)) { |
02f1175c JS |
2144 | return; |
2145 | } | |
1da177e4 | 2146 | |
875b206b | 2147 | zfw_ctrl = card->base_addr + |
db05c3b1 | 2148 | (readl(&firm_id->zfwctrl_addr) & 0xfffff); |
02f1175c JS |
2149 | board_ctrl = &zfw_ctrl->board_ctrl; |
2150 | ch_ctrl = zfw_ctrl->ch_ctrl; | |
1da177e4 | 2151 | |
9fa1b3b1 | 2152 | spin_lock_irqsave(&card->card_lock, flags); |
1da177e4 | 2153 | |
02f1175c JS |
2154 | if (info->xmit_buf) { |
2155 | unsigned char *temp; | |
2156 | temp = info->xmit_buf; | |
2157 | info->xmit_buf = NULL; | |
2158 | free_page((unsigned long)temp); | |
1da177e4 | 2159 | } |
02f1175c JS |
2160 | |
2161 | if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) { | |
2162 | cy_writel(&ch_ctrl[channel].rs_control, | |
db05c3b1 | 2163 | (__u32)(readl(&ch_ctrl[channel].rs_control) & |
02f1175c | 2164 | ~(C_RS_RTS | C_RS_DTR))); |
875b206b | 2165 | retval = cyz_issue_cmd(info->card, channel, |
02f1175c JS |
2166 | C_CM_IOCTLM, 0L); |
2167 | if (retval != 0) { | |
21719191 JS |
2168 | printk(KERN_ERR"cyc:shutdown retval on ttyC%d " |
2169 | "was %x\n", info->line, retval); | |
02f1175c | 2170 | } |
1da177e4 | 2171 | #ifdef CY_DEBUG_DTR |
21719191 | 2172 | printk(KERN_DEBUG "cyc:shutdown dropping Z DTR\n"); |
1da177e4 | 2173 | #endif |
02f1175c | 2174 | } |
1da177e4 | 2175 | |
02f1175c JS |
2176 | if (info->tty) { |
2177 | set_bit(TTY_IO_ERROR, &info->tty->flags); | |
2178 | } | |
2179 | info->flags &= ~ASYNC_INITIALIZED; | |
2180 | ||
9fa1b3b1 | 2181 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c | 2182 | } |
1da177e4 LT |
2183 | |
2184 | #ifdef CY_DEBUG_OPEN | |
21719191 | 2185 | printk(KERN_DEBUG "cyc shutdown done\n"); |
1da177e4 | 2186 | #endif |
02f1175c | 2187 | } /* shutdown */ |
1da177e4 LT |
2188 | |
2189 | /* | |
2190 | * ------------------------------------------------------------ | |
2191 | * cy_open() and friends | |
2192 | * ------------------------------------------------------------ | |
2193 | */ | |
2194 | ||
2195 | static int | |
02f1175c JS |
2196 | block_til_ready(struct tty_struct *tty, struct file *filp, |
2197 | struct cyclades_port *info) | |
1da177e4 | 2198 | { |
02f1175c JS |
2199 | DECLARE_WAITQUEUE(wait, current); |
2200 | struct cyclades_card *cinfo; | |
2201 | unsigned long flags; | |
2202 | int chip, channel, index; | |
2203 | int retval; | |
2204 | void __iomem *base_addr; | |
2205 | ||
875b206b | 2206 | cinfo = info->card; |
02f1175c JS |
2207 | channel = info->line - cinfo->first_line; |
2208 | ||
2209 | /* | |
2210 | * If the device is in the middle of being closed, then block | |
2211 | * until it's done, and then try again. | |
2212 | */ | |
2213 | if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { | |
2c7fea99 JS |
2214 | wait_event_interruptible(info->close_wait, |
2215 | !(info->flags & ASYNC_CLOSING)); | |
096dcfce | 2216 | return (info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS; |
1da177e4 | 2217 | } |
02f1175c JS |
2218 | |
2219 | /* | |
2220 | * If non-blocking mode is set, then make the check up front | |
2221 | * and then exit. | |
2222 | */ | |
2223 | if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { | |
2224 | info->flags |= ASYNC_NORMAL_ACTIVE; | |
2225 | return 0; | |
2226 | } | |
2227 | ||
2228 | /* | |
2229 | * Block waiting for the carrier detect and the line to become | |
2230 | * free (i.e., not in use by the callout). While we are in | |
2231 | * this loop, info->count is dropped by one, so that | |
2232 | * cy_close() knows when to free things. We restore it upon | |
2233 | * exit, either normal or abnormal. | |
2234 | */ | |
2235 | retval = 0; | |
2236 | add_wait_queue(&info->open_wait, &wait); | |
1da177e4 | 2237 | #ifdef CY_DEBUG_OPEN |
21719191 JS |
2238 | printk(KERN_DEBUG "cyc block_til_ready before block: ttyC%d, " |
2239 | "count = %d\n", info->line, info->count); | |
1da177e4 | 2240 | #endif |
9fa1b3b1 | 2241 | spin_lock_irqsave(&cinfo->card_lock, flags); |
02f1175c JS |
2242 | if (!tty_hung_up_p(filp)) |
2243 | info->count--; | |
9fa1b3b1 | 2244 | spin_unlock_irqrestore(&cinfo->card_lock, flags); |
1da177e4 | 2245 | #ifdef CY_DEBUG_COUNT |
21719191 JS |
2246 | printk(KERN_DEBUG "cyc block_til_ready: (%d): decrementing count to " |
2247 | "%d\n", current->pid, info->count); | |
1da177e4 | 2248 | #endif |
02f1175c JS |
2249 | info->blocked_open++; |
2250 | ||
2251 | if (!IS_CYC_Z(*cinfo)) { | |
2252 | chip = channel >> 2; | |
2253 | channel &= 0x03; | |
2254 | index = cinfo->bus_index; | |
2255 | base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index); | |
2256 | ||
2257 | while (1) { | |
9fa1b3b1 | 2258 | spin_lock_irqsave(&cinfo->card_lock, flags); |
02f1175c JS |
2259 | if ((tty->termios->c_cflag & CBAUD)) { |
2260 | cy_writeb(base_addr + (CyCAR << index), | |
2261 | (u_char) channel); | |
2262 | cy_writeb(base_addr + (CyMSVR1 << index), | |
2263 | CyRTS); | |
2264 | cy_writeb(base_addr + (CyMSVR2 << index), | |
2265 | CyDTR); | |
1da177e4 | 2266 | #ifdef CY_DEBUG_DTR |
21719191 JS |
2267 | printk(KERN_DEBUG "cyc:block_til_ready raising " |
2268 | "DTR\n"); | |
2269 | printk(KERN_DEBUG " status: 0x%x, 0x%x\n", | |
db05c3b1 JS |
2270 | readb(base_addr + (CyMSVR1 << index)), |
2271 | readb(base_addr + (CyMSVR2 << index))); | |
1da177e4 | 2272 | #endif |
02f1175c | 2273 | } |
9fa1b3b1 | 2274 | spin_unlock_irqrestore(&cinfo->card_lock, flags); |
1da177e4 | 2275 | |
02f1175c JS |
2276 | set_current_state(TASK_INTERRUPTIBLE); |
2277 | if (tty_hung_up_p(filp) || | |
2278 | !(info->flags & ASYNC_INITIALIZED)) { | |
2279 | retval = ((info->flags & ASYNC_HUP_NOTIFY) ? | |
2280 | -EAGAIN : -ERESTARTSYS); | |
2281 | break; | |
2282 | } | |
1da177e4 | 2283 | |
9fa1b3b1 | 2284 | spin_lock_irqsave(&cinfo->card_lock, flags); |
02f1175c JS |
2285 | cy_writeb(base_addr + (CyCAR << index), |
2286 | (u_char) channel); | |
2287 | if (!(info->flags & ASYNC_CLOSING) && (C_CLOCAL(tty) || | |
db05c3b1 | 2288 | (readb(base_addr + |
02f1175c | 2289 | (CyMSVR1 << index)) & CyDCD))) { |
9fa1b3b1 | 2290 | spin_unlock_irqrestore(&cinfo->card_lock, flags); |
02f1175c JS |
2291 | break; |
2292 | } | |
9fa1b3b1 | 2293 | spin_unlock_irqrestore(&cinfo->card_lock, flags); |
1da177e4 | 2294 | |
02f1175c JS |
2295 | if (signal_pending(current)) { |
2296 | retval = -ERESTARTSYS; | |
2297 | break; | |
2298 | } | |
1da177e4 | 2299 | #ifdef CY_DEBUG_OPEN |
21719191 JS |
2300 | printk(KERN_DEBUG "cyc block_til_ready blocking: " |
2301 | "ttyC%d, count = %d\n", | |
2302 | info->line, info->count); | |
1da177e4 | 2303 | #endif |
02f1175c | 2304 | schedule(); |
1da177e4 | 2305 | } |
02f1175c JS |
2306 | } else { |
2307 | struct FIRM_ID __iomem *firm_id; | |
2308 | struct ZFW_CTRL __iomem *zfw_ctrl; | |
2309 | struct BOARD_CTRL __iomem *board_ctrl; | |
2310 | struct CH_CTRL __iomem *ch_ctrl; | |
02f1175c JS |
2311 | |
2312 | base_addr = cinfo->base_addr; | |
2313 | firm_id = base_addr + ID_ADDRESS; | |
2314 | if (!ISZLOADED(*cinfo)) { | |
cc0a8fbb | 2315 | __set_current_state(TASK_RUNNING); |
02f1175c JS |
2316 | remove_wait_queue(&info->open_wait, &wait); |
2317 | return -EINVAL; | |
2318 | } | |
2319 | ||
db05c3b1 | 2320 | zfw_ctrl = base_addr + (readl(&firm_id->zfwctrl_addr)& 0xfffff); |
02f1175c JS |
2321 | board_ctrl = &zfw_ctrl->board_ctrl; |
2322 | ch_ctrl = zfw_ctrl->ch_ctrl; | |
2323 | ||
2324 | while (1) { | |
2325 | if ((tty->termios->c_cflag & CBAUD)) { | |
2326 | cy_writel(&ch_ctrl[channel].rs_control, | |
db05c3b1 JS |
2327 | readl(&ch_ctrl[channel].rs_control) | |
2328 | C_RS_RTS | C_RS_DTR); | |
9fa1b3b1 | 2329 | retval = cyz_issue_cmd(cinfo, |
db05c3b1 | 2330 | channel, C_CM_IOCTLM, 0L); |
02f1175c | 2331 | if (retval != 0) { |
21719191 JS |
2332 | printk(KERN_ERR "cyc:block_til_ready " |
2333 | "retval on ttyC%d was %x\n", | |
02f1175c JS |
2334 | info->line, retval); |
2335 | } | |
1da177e4 | 2336 | #ifdef CY_DEBUG_DTR |
21719191 JS |
2337 | printk(KERN_DEBUG "cyc:block_til_ready raising " |
2338 | "Z DTR\n"); | |
1da177e4 | 2339 | #endif |
02f1175c | 2340 | } |
1da177e4 | 2341 | |
02f1175c JS |
2342 | set_current_state(TASK_INTERRUPTIBLE); |
2343 | if (tty_hung_up_p(filp) || | |
2344 | !(info->flags & ASYNC_INITIALIZED)) { | |
2345 | retval = ((info->flags & ASYNC_HUP_NOTIFY) ? | |
2346 | -EAGAIN : -ERESTARTSYS); | |
2347 | break; | |
2348 | } | |
2349 | if (!(info->flags & ASYNC_CLOSING) && (C_CLOCAL(tty) || | |
db05c3b1 | 2350 | (readl(&ch_ctrl[channel].rs_status) & |
02f1175c JS |
2351 | C_RS_DCD))) { |
2352 | break; | |
2353 | } | |
2354 | if (signal_pending(current)) { | |
2355 | retval = -ERESTARTSYS; | |
2356 | break; | |
2357 | } | |
1da177e4 | 2358 | #ifdef CY_DEBUG_OPEN |
21719191 JS |
2359 | printk(KERN_DEBUG "cyc block_til_ready blocking: " |
2360 | "ttyC%d, count = %d\n", | |
2361 | info->line, info->count); | |
1da177e4 | 2362 | #endif |
02f1175c JS |
2363 | schedule(); |
2364 | } | |
1da177e4 | 2365 | } |
cc0a8fbb | 2366 | __set_current_state(TASK_RUNNING); |
02f1175c JS |
2367 | remove_wait_queue(&info->open_wait, &wait); |
2368 | if (!tty_hung_up_p(filp)) { | |
2369 | info->count++; | |
1da177e4 | 2370 | #ifdef CY_DEBUG_COUNT |
21719191 JS |
2371 | printk(KERN_DEBUG "cyc:block_til_ready (%d): incrementing " |
2372 | "count to %d\n", current->pid, info->count); | |
1da177e4 | 2373 | #endif |
02f1175c JS |
2374 | } |
2375 | info->blocked_open--; | |
1da177e4 | 2376 | #ifdef CY_DEBUG_OPEN |
21719191 JS |
2377 | printk(KERN_DEBUG "cyc:block_til_ready after blocking: ttyC%d, " |
2378 | "count = %d\n", info->line, info->count); | |
1da177e4 | 2379 | #endif |
02f1175c JS |
2380 | if (retval) |
2381 | return retval; | |
2382 | info->flags |= ASYNC_NORMAL_ACTIVE; | |
2383 | return 0; | |
2384 | } /* block_til_ready */ | |
1da177e4 LT |
2385 | |
2386 | /* | |
2387 | * This routine is called whenever a serial port is opened. It | |
2388 | * performs the serial-specific initialization for the tty structure. | |
2389 | */ | |
02f1175c | 2390 | static int cy_open(struct tty_struct *tty, struct file *filp) |
1da177e4 | 2391 | { |
02f1175c | 2392 | struct cyclades_port *info; |
dd025c0c | 2393 | unsigned int i; |
02f1175c | 2394 | int retval, line; |
1da177e4 | 2395 | |
02f1175c JS |
2396 | line = tty->index; |
2397 | if ((line < 0) || (NR_PORTS <= line)) { | |
2398 | return -ENODEV; | |
2399 | } | |
dd025c0c JS |
2400 | for (i = 0; i < NR_CARDS; i++) |
2401 | if (line < cy_card[i].first_line + cy_card[i].nports && | |
2402 | line >= cy_card[i].first_line) | |
2403 | break; | |
2404 | if (i >= NR_CARDS) | |
2405 | return -ENODEV; | |
2406 | info = &cy_card[i].ports[line - cy_card[i].first_line]; | |
02f1175c JS |
2407 | if (info->line < 0) { |
2408 | return -ENODEV; | |
2409 | } | |
1da177e4 | 2410 | |
02f1175c JS |
2411 | /* If the card's firmware hasn't been loaded, |
2412 | treat it as absent from the system. This | |
2413 | will make the user pay attention. | |
2414 | */ | |
875b206b JS |
2415 | if (IS_CYC_Z(*info->card)) { |
2416 | struct cyclades_card *cinfo = info->card; | |
02f1175c JS |
2417 | struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS; |
2418 | ||
2419 | if (!ISZLOADED(*cinfo)) { | |
db05c3b1 | 2420 | if (((ZE_V1 == readl(&((struct RUNTIME_9060 __iomem *) |
02f1175c JS |
2421 | (cinfo->ctl_addr))->mail_box_0)) && |
2422 | Z_FPGA_CHECK(*cinfo)) && | |
db05c3b1 | 2423 | (ZFIRM_HLT == readl( |
02f1175c | 2424 | &firm_id->signature))) { |
21719191 JS |
2425 | printk(KERN_ERR "cyc:Cyclades-Z Error: you " |
2426 | "need an external power supply for " | |
2427 | "this number of ports.\nFirmware " | |
2428 | "halted.\n"); | |
02f1175c | 2429 | } else { |
21719191 JS |
2430 | printk(KERN_ERR "cyc:Cyclades-Z firmware not " |
2431 | "yet loaded\n"); | |
02f1175c JS |
2432 | } |
2433 | return -ENODEV; | |
2434 | } | |
2435 | #ifdef CONFIG_CYZ_INTR | |
2436 | else { | |
2437 | /* In case this Z board is operating in interrupt mode, its | |
2438 | interrupts should be enabled as soon as the first open | |
2439 | happens to one of its ports. */ | |
2440 | if (!cinfo->intr_enabled) { | |
2441 | struct ZFW_CTRL __iomem *zfw_ctrl; | |
2442 | struct BOARD_CTRL __iomem *board_ctrl; | |
2443 | ||
2444 | zfw_ctrl = cinfo->base_addr + | |
db05c3b1 JS |
2445 | (readl(&firm_id->zfwctrl_addr) & |
2446 | 0xfffff); | |
02f1175c JS |
2447 | |
2448 | board_ctrl = &zfw_ctrl->board_ctrl; | |
2449 | ||
2450 | /* Enable interrupts on the PLX chip */ | |
2451 | cy_writew(cinfo->ctl_addr + 0x68, | |
db05c3b1 | 2452 | readw(cinfo->ctl_addr + 0x68) | 0x0900); |
02f1175c JS |
2453 | /* Enable interrupts on the FW */ |
2454 | retval = cyz_issue_cmd(cinfo, 0, | |
2455 | C_CM_IRQ_ENBL, 0L); | |
2456 | if (retval != 0) { | |
21719191 JS |
2457 | printk(KERN_ERR "cyc:IRQ enable retval " |
2458 | "was %x\n", retval); | |
02f1175c JS |
2459 | } |
2460 | cinfo->nports = | |
db05c3b1 | 2461 | (int)readl(&board_ctrl->n_channel); |
02f1175c JS |
2462 | cinfo->intr_enabled = 1; |
2463 | } | |
1da177e4 | 2464 | } |
02f1175c JS |
2465 | #endif /* CONFIG_CYZ_INTR */ |
2466 | /* Make sure this Z port really exists in hardware */ | |
2467 | if (info->line > (cinfo->first_line + cinfo->nports - 1)) | |
2468 | return -ENODEV; | |
1da177e4 | 2469 | } |
1da177e4 | 2470 | #ifdef CY_DEBUG_OTHER |
21719191 | 2471 | printk(KERN_DEBUG "cyc:cy_open ttyC%d\n", info->line); |
1da177e4 | 2472 | #endif |
02f1175c JS |
2473 | tty->driver_data = info; |
2474 | info->tty = tty; | |
2475 | if (serial_paranoia_check(info, tty->name, "cy_open")) { | |
2476 | return -ENODEV; | |
2477 | } | |
1da177e4 | 2478 | #ifdef CY_DEBUG_OPEN |
21719191 JS |
2479 | printk(KERN_DEBUG "cyc:cy_open ttyC%d, count = %d\n", info->line, |
2480 | info->count); | |
1da177e4 | 2481 | #endif |
02f1175c | 2482 | info->count++; |
1da177e4 | 2483 | #ifdef CY_DEBUG_COUNT |
21719191 | 2484 | printk(KERN_DEBUG "cyc:cy_open (%d): incrementing count to %d\n", |
02f1175c | 2485 | current->pid, info->count); |
1da177e4 | 2486 | #endif |
1da177e4 | 2487 | |
02f1175c JS |
2488 | /* |
2489 | * If the port is the middle of closing, bail out now | |
2490 | */ | |
2491 | if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { | |
2c7fea99 JS |
2492 | wait_event_interruptible(info->close_wait, |
2493 | !(info->flags & ASYNC_CLOSING)); | |
096dcfce | 2494 | return (info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS; |
02f1175c | 2495 | } |
1da177e4 | 2496 | |
02f1175c JS |
2497 | /* |
2498 | * Start up serial port | |
2499 | */ | |
2500 | retval = startup(info); | |
2501 | if (retval) { | |
2502 | return retval; | |
2503 | } | |
1da177e4 | 2504 | |
02f1175c JS |
2505 | retval = block_til_ready(tty, filp, info); |
2506 | if (retval) { | |
1da177e4 | 2507 | #ifdef CY_DEBUG_OPEN |
21719191 JS |
2508 | printk(KERN_DEBUG "cyc:cy_open returning after block_til_ready " |
2509 | "with %d\n", retval); | |
1da177e4 | 2510 | #endif |
02f1175c JS |
2511 | return retval; |
2512 | } | |
1da177e4 | 2513 | |
02f1175c | 2514 | info->throttle = 0; |
1da177e4 | 2515 | |
02f1175c | 2516 | #ifdef CY_DEBUG_OPEN |
21719191 | 2517 | printk(KERN_DEBUG "cyc:cy_open done\n"); |
02f1175c JS |
2518 | #endif |
2519 | return 0; | |
2520 | } /* cy_open */ | |
1da177e4 LT |
2521 | |
2522 | /* | |
2523 | * cy_wait_until_sent() --- wait until the transmitter is empty | |
2524 | */ | |
02f1175c | 2525 | static void cy_wait_until_sent(struct tty_struct *tty, int timeout) |
1da177e4 | 2526 | { |
875b206b | 2527 | struct cyclades_card *card; |
cab9bdd1 | 2528 | struct cyclades_port *info = tty->driver_data; |
02f1175c | 2529 | void __iomem *base_addr; |
875b206b | 2530 | int chip, channel, index; |
02f1175c JS |
2531 | unsigned long orig_jiffies; |
2532 | int char_time; | |
2533 | ||
2534 | if (serial_paranoia_check(info, tty->name, "cy_wait_until_sent")) | |
2535 | return; | |
2536 | ||
2537 | if (info->xmit_fifo_size == 0) | |
2538 | return; /* Just in case.... */ | |
1da177e4 | 2539 | |
02f1175c JS |
2540 | orig_jiffies = jiffies; |
2541 | /* | |
2542 | * Set the check interval to be 1/5 of the estimated time to | |
2543 | * send a single character, and make it at least 1. The check | |
2544 | * interval should also be less than the timeout. | |
2545 | * | |
2546 | * Note: we have to use pretty tight timings here to satisfy | |
2547 | * the NIST-PCTS. | |
2548 | */ | |
2549 | char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size; | |
2550 | char_time = char_time / 5; | |
2551 | if (char_time <= 0) | |
2552 | char_time = 1; | |
2553 | if (timeout < 0) | |
2554 | timeout = 0; | |
2555 | if (timeout) | |
2556 | char_time = min(char_time, timeout); | |
2557 | /* | |
2558 | * If the transmitter hasn't cleared in twice the approximate | |
2559 | * amount of time to send the entire FIFO, it probably won't | |
2560 | * ever clear. This assumes the UART isn't doing flow | |
2561 | * control, which is currently the case. Hence, if it ever | |
2562 | * takes longer than info->timeout, this is probably due to a | |
2563 | * UART bug of some kind. So, we clamp the timeout parameter at | |
2564 | * 2*info->timeout. | |
2565 | */ | |
2566 | if (!timeout || timeout > 2 * info->timeout) | |
2567 | timeout = 2 * info->timeout; | |
1da177e4 | 2568 | #ifdef CY_DEBUG_WAIT_UNTIL_SENT |
21719191 JS |
2569 | printk(KERN_DEBUG "In cy_wait_until_sent(%d) check=%d, jiff=%lu...", |
2570 | timeout, char_time, jiffies); | |
1da177e4 | 2571 | #endif |
02f1175c | 2572 | card = info->card; |
875b206b JS |
2573 | channel = (info->line) - (card->first_line); |
2574 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
2575 | chip = channel >> 2; |
2576 | channel &= 0x03; | |
875b206b JS |
2577 | index = card->bus_index; |
2578 | base_addr = card->base_addr + (cy_chip_offset[chip] << index); | |
db05c3b1 | 2579 | while (readb(base_addr + (CySRER << index)) & CyTxRdy) { |
1da177e4 | 2580 | #ifdef CY_DEBUG_WAIT_UNTIL_SENT |
21719191 | 2581 | printk(KERN_DEBUG "Not clean (jiff=%lu)...", jiffies); |
1da177e4 | 2582 | #endif |
02f1175c JS |
2583 | if (msleep_interruptible(jiffies_to_msecs(char_time))) |
2584 | break; | |
2585 | if (timeout && time_after(jiffies, orig_jiffies + | |
2586 | timeout)) | |
2587 | break; | |
2588 | } | |
1da177e4 | 2589 | } |
02f1175c JS |
2590 | /* Run one more char cycle */ |
2591 | msleep_interruptible(jiffies_to_msecs(char_time * 5)); | |
1da177e4 | 2592 | #ifdef CY_DEBUG_WAIT_UNTIL_SENT |
21719191 | 2593 | printk(KERN_DEBUG "Clean (jiff=%lu)...done\n", jiffies); |
1da177e4 LT |
2594 | #endif |
2595 | } | |
2596 | ||
2597 | /* | |
2598 | * This routine is called when a particular tty device is closed. | |
2599 | */ | |
02f1175c | 2600 | static void cy_close(struct tty_struct *tty, struct file *filp) |
1da177e4 | 2601 | { |
cab9bdd1 | 2602 | struct cyclades_port *info = tty->driver_data; |
9fa1b3b1 | 2603 | struct cyclades_card *card; |
02f1175c | 2604 | unsigned long flags; |
1da177e4 LT |
2605 | |
2606 | #ifdef CY_DEBUG_OTHER | |
21719191 | 2607 | printk(KERN_DEBUG "cyc:cy_close ttyC%d\n", info->line); |
1da177e4 LT |
2608 | #endif |
2609 | ||
02f1175c JS |
2610 | if (!info || serial_paranoia_check(info, tty->name, "cy_close")) { |
2611 | return; | |
2612 | } | |
1da177e4 | 2613 | |
9fa1b3b1 JS |
2614 | card = info->card; |
2615 | ||
2616 | spin_lock_irqsave(&card->card_lock, flags); | |
02f1175c JS |
2617 | /* If the TTY is being hung up, nothing to do */ |
2618 | if (tty_hung_up_p(filp)) { | |
9fa1b3b1 | 2619 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
2620 | return; |
2621 | } | |
1da177e4 | 2622 | #ifdef CY_DEBUG_OPEN |
21719191 JS |
2623 | printk(KERN_DEBUG "cyc:cy_close ttyC%d, count = %d\n", info->line, |
2624 | info->count); | |
1da177e4 | 2625 | #endif |
02f1175c JS |
2626 | if ((tty->count == 1) && (info->count != 1)) { |
2627 | /* | |
2628 | * Uh, oh. tty->count is 1, which means that the tty | |
2629 | * structure will be freed. Info->count should always | |
2630 | * be one in these conditions. If it's greater than | |
2631 | * one, we've got real problems, since it means the | |
2632 | * serial port won't be shutdown. | |
2633 | */ | |
21719191 JS |
2634 | printk(KERN_ERR "cyc:cy_close: bad serial port count; " |
2635 | "tty->count is 1, info->count is %d\n", info->count); | |
02f1175c JS |
2636 | info->count = 1; |
2637 | } | |
1da177e4 | 2638 | #ifdef CY_DEBUG_COUNT |
21719191 | 2639 | printk(KERN_DEBUG "cyc:cy_close at (%d): decrementing count to %d\n", |
02f1175c | 2640 | current->pid, info->count - 1); |
1da177e4 | 2641 | #endif |
02f1175c | 2642 | if (--info->count < 0) { |
1da177e4 | 2643 | #ifdef CY_DEBUG_COUNT |
21719191 | 2644 | printk(KERN_DEBUG "cyc:cyc_close setting count to 0\n"); |
1da177e4 | 2645 | #endif |
02f1175c | 2646 | info->count = 0; |
1da177e4 | 2647 | } |
02f1175c | 2648 | if (info->count) { |
9fa1b3b1 | 2649 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
2650 | return; |
2651 | } | |
2652 | info->flags |= ASYNC_CLOSING; | |
1da177e4 | 2653 | |
02f1175c JS |
2654 | /* |
2655 | * Now we wait for the transmit buffer to clear; and we notify | |
2656 | * the line discipline to only process XON/XOFF characters. | |
2657 | */ | |
2658 | tty->closing = 1; | |
9fa1b3b1 | 2659 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
2660 | if (info->closing_wait != CY_CLOSING_WAIT_NONE) { |
2661 | tty_wait_until_sent(tty, info->closing_wait); | |
1da177e4 | 2662 | } |
9fa1b3b1 | 2663 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c | 2664 | |
9fa1b3b1 JS |
2665 | if (!IS_CYC_Z(*card)) { |
2666 | int channel = info->line - card->first_line; | |
2667 | int index = card->bus_index; | |
2668 | void __iomem *base_addr = card->base_addr + | |
02f1175c JS |
2669 | (cy_chip_offset[channel >> 2] << index); |
2670 | /* Stop accepting input */ | |
2671 | channel &= 0x03; | |
2672 | cy_writeb(base_addr + (CyCAR << index), (u_char) channel); | |
2673 | cy_writeb(base_addr + (CySRER << index), | |
db05c3b1 | 2674 | readb(base_addr + (CySRER << index)) & ~CyRxData); |
02f1175c JS |
2675 | if (info->flags & ASYNC_INITIALIZED) { |
2676 | /* Waiting for on-board buffers to be empty before closing | |
2677 | the port */ | |
9fa1b3b1 | 2678 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c | 2679 | cy_wait_until_sent(tty, info->timeout); |
9fa1b3b1 | 2680 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
2681 | } |
2682 | } else { | |
2683 | #ifdef Z_WAKE | |
2684 | /* Waiting for on-board buffers to be empty before closing the port */ | |
9fa1b3b1 | 2685 | void __iomem *base_addr = card->base_addr; |
02f1175c JS |
2686 | struct FIRM_ID __iomem *firm_id = base_addr + ID_ADDRESS; |
2687 | struct ZFW_CTRL __iomem *zfw_ctrl = | |
db05c3b1 | 2688 | base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); |
02f1175c | 2689 | struct CH_CTRL __iomem *ch_ctrl = zfw_ctrl->ch_ctrl; |
9fa1b3b1 | 2690 | int channel = info->line - card->first_line; |
02f1175c JS |
2691 | int retval; |
2692 | ||
db05c3b1 | 2693 | if (readl(&ch_ctrl[channel].flow_status) != C_FS_TXIDLE) { |
9fa1b3b1 | 2694 | retval = cyz_issue_cmd(card, channel, C_CM_IOCTLW, 0L); |
02f1175c | 2695 | if (retval != 0) { |
21719191 JS |
2696 | printk(KERN_DEBUG "cyc:cy_close retval on " |
2697 | "ttyC%d was %x\n", info->line, retval); | |
02f1175c | 2698 | } |
9fa1b3b1 | 2699 | spin_unlock_irqrestore(&card->card_lock, flags); |
2c7fea99 | 2700 | wait_for_completion_interruptible(&info->shutdown_wait); |
9fa1b3b1 | 2701 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c | 2702 | } |
1da177e4 | 2703 | #endif |
02f1175c JS |
2704 | } |
2705 | ||
9fa1b3b1 | 2706 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
2707 | shutdown(info); |
2708 | if (tty->driver->flush_buffer) | |
2709 | tty->driver->flush_buffer(tty); | |
2710 | tty_ldisc_flush(tty); | |
9fa1b3b1 | 2711 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
2712 | |
2713 | tty->closing = 0; | |
02f1175c JS |
2714 | info->tty = NULL; |
2715 | if (info->blocked_open) { | |
9fa1b3b1 | 2716 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
2717 | if (info->close_delay) { |
2718 | msleep_interruptible(jiffies_to_msecs | |
2719 | (info->close_delay)); | |
2720 | } | |
2721 | wake_up_interruptible(&info->open_wait); | |
9fa1b3b1 | 2722 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
2723 | } |
2724 | info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); | |
2725 | wake_up_interruptible(&info->close_wait); | |
1da177e4 LT |
2726 | |
2727 | #ifdef CY_DEBUG_OTHER | |
21719191 | 2728 | printk(KERN_DEBUG "cyc:cy_close done\n"); |
1da177e4 LT |
2729 | #endif |
2730 | ||
9fa1b3b1 | 2731 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c | 2732 | } /* cy_close */ |
1da177e4 LT |
2733 | |
2734 | /* This routine gets called when tty_write has put something into | |
2735 | * the write_queue. The characters may come from user space or | |
2736 | * kernel space. | |
2737 | * | |
2738 | * This routine will return the number of characters actually | |
2739 | * accepted for writing. | |
2740 | * | |
2741 | * If the port is not already transmitting stuff, start it off by | |
2742 | * enabling interrupts. The interrupt service routine will then | |
2743 | * ensure that the characters are sent. | |
2744 | * If the port is already active, there is no need to kick it. | |
2745 | * | |
2746 | */ | |
02f1175c | 2747 | static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) |
1da177e4 | 2748 | { |
cab9bdd1 | 2749 | struct cyclades_port *info = tty->driver_data; |
02f1175c JS |
2750 | unsigned long flags; |
2751 | int c, ret = 0; | |
1da177e4 LT |
2752 | |
2753 | #ifdef CY_DEBUG_IO | |
21719191 | 2754 | printk(KERN_DEBUG "cyc:cy_write ttyC%d\n", info->line); |
1da177e4 LT |
2755 | #endif |
2756 | ||
02f1175c JS |
2757 | if (serial_paranoia_check(info, tty->name, "cy_write")) { |
2758 | return 0; | |
2759 | } | |
1da177e4 | 2760 | |
02f1175c JS |
2761 | if (!info->xmit_buf) |
2762 | return 0; | |
1da177e4 | 2763 | |
9fa1b3b1 | 2764 | spin_lock_irqsave(&info->card->card_lock, flags); |
02f1175c JS |
2765 | while (1) { |
2766 | c = min(count, min((int)(SERIAL_XMIT_SIZE - info->xmit_cnt - 1), | |
2767 | (int)(SERIAL_XMIT_SIZE - info->xmit_head))); | |
2768 | ||
2769 | if (c <= 0) | |
2770 | break; | |
2771 | ||
2772 | memcpy(info->xmit_buf + info->xmit_head, buf, c); | |
2773 | info->xmit_head = (info->xmit_head + c) & | |
2774 | (SERIAL_XMIT_SIZE - 1); | |
2775 | info->xmit_cnt += c; | |
2776 | buf += c; | |
2777 | count -= c; | |
2778 | ret += c; | |
2779 | } | |
9fa1b3b1 | 2780 | spin_unlock_irqrestore(&info->card->card_lock, flags); |
02f1175c JS |
2781 | |
2782 | info->idle_stats.xmit_bytes += ret; | |
2783 | info->idle_stats.xmit_idle = jiffies; | |
2784 | ||
2785 | if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) { | |
2786 | start_xmit(info); | |
2787 | } | |
2788 | return ret; | |
2789 | } /* cy_write */ | |
1da177e4 LT |
2790 | |
2791 | /* | |
2792 | * This routine is called by the kernel to write a single | |
2793 | * character to the tty device. If the kernel uses this routine, | |
2794 | * it must call the flush_chars() routine (if defined) when it is | |
2795 | * done stuffing characters into the driver. If there is no room | |
2796 | * in the queue, the character is ignored. | |
2797 | */ | |
02f1175c | 2798 | static void cy_put_char(struct tty_struct *tty, unsigned char ch) |
1da177e4 | 2799 | { |
cab9bdd1 | 2800 | struct cyclades_port *info = tty->driver_data; |
02f1175c | 2801 | unsigned long flags; |
1da177e4 LT |
2802 | |
2803 | #ifdef CY_DEBUG_IO | |
21719191 | 2804 | printk(KERN_DEBUG "cyc:cy_put_char ttyC%d\n", info->line); |
1da177e4 LT |
2805 | #endif |
2806 | ||
02f1175c JS |
2807 | if (serial_paranoia_check(info, tty->name, "cy_put_char")) |
2808 | return; | |
1da177e4 | 2809 | |
02f1175c JS |
2810 | if (!info->xmit_buf) |
2811 | return; | |
1da177e4 | 2812 | |
9fa1b3b1 | 2813 | spin_lock_irqsave(&info->card->card_lock, flags); |
90cc3018 | 2814 | if (info->xmit_cnt >= (int)(SERIAL_XMIT_SIZE - 1)) { |
9fa1b3b1 | 2815 | spin_unlock_irqrestore(&info->card->card_lock, flags); |
02f1175c JS |
2816 | return; |
2817 | } | |
1da177e4 | 2818 | |
02f1175c JS |
2819 | info->xmit_buf[info->xmit_head++] = ch; |
2820 | info->xmit_head &= SERIAL_XMIT_SIZE - 1; | |
2821 | info->xmit_cnt++; | |
1da177e4 LT |
2822 | info->idle_stats.xmit_bytes++; |
2823 | info->idle_stats.xmit_idle = jiffies; | |
9fa1b3b1 | 2824 | spin_unlock_irqrestore(&info->card->card_lock, flags); |
02f1175c | 2825 | } /* cy_put_char */ |
1da177e4 LT |
2826 | |
2827 | /* | |
2828 | * This routine is called by the kernel after it has written a | |
2829 | * series of characters to the tty device using put_char(). | |
2830 | */ | |
02f1175c | 2831 | static void cy_flush_chars(struct tty_struct *tty) |
1da177e4 | 2832 | { |
cab9bdd1 | 2833 | struct cyclades_port *info = tty->driver_data; |
02f1175c | 2834 | |
1da177e4 | 2835 | #ifdef CY_DEBUG_IO |
21719191 | 2836 | printk(KERN_DEBUG "cyc:cy_flush_chars ttyC%d\n", info->line); |
1da177e4 LT |
2837 | #endif |
2838 | ||
02f1175c JS |
2839 | if (serial_paranoia_check(info, tty->name, "cy_flush_chars")) |
2840 | return; | |
1da177e4 | 2841 | |
02f1175c JS |
2842 | if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || |
2843 | !info->xmit_buf) | |
2844 | return; | |
1da177e4 | 2845 | |
02f1175c JS |
2846 | start_xmit(info); |
2847 | } /* cy_flush_chars */ | |
1da177e4 LT |
2848 | |
2849 | /* | |
2850 | * This routine returns the numbers of characters the tty driver | |
2851 | * will accept for queuing to be written. This number is subject | |
2852 | * to change as output buffers get emptied, or if the output flow | |
2853 | * control is activated. | |
2854 | */ | |
02f1175c | 2855 | static int cy_write_room(struct tty_struct *tty) |
1da177e4 | 2856 | { |
cab9bdd1 | 2857 | struct cyclades_port *info = tty->driver_data; |
02f1175c JS |
2858 | int ret; |
2859 | ||
1da177e4 | 2860 | #ifdef CY_DEBUG_IO |
21719191 | 2861 | printk(KERN_DEBUG "cyc:cy_write_room ttyC%d\n", info->line); |
1da177e4 LT |
2862 | #endif |
2863 | ||
02f1175c JS |
2864 | if (serial_paranoia_check(info, tty->name, "cy_write_room")) |
2865 | return 0; | |
2866 | ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; | |
2867 | if (ret < 0) | |
2868 | ret = 0; | |
2869 | return ret; | |
2870 | } /* cy_write_room */ | |
1da177e4 | 2871 | |
02f1175c | 2872 | static int cy_chars_in_buffer(struct tty_struct *tty) |
1da177e4 | 2873 | { |
875b206b | 2874 | struct cyclades_card *card; |
cab9bdd1 | 2875 | struct cyclades_port *info = tty->driver_data; |
875b206b | 2876 | int channel; |
1da177e4 | 2877 | |
02f1175c JS |
2878 | if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer")) |
2879 | return 0; | |
2880 | ||
2881 | card = info->card; | |
875b206b | 2882 | channel = (info->line) - (card->first_line); |
1da177e4 LT |
2883 | |
2884 | #ifdef Z_EXT_CHARS_IN_BUFFER | |
02f1175c JS |
2885 | if (!IS_CYC_Z(cy_card[card])) { |
2886 | #endif /* Z_EXT_CHARS_IN_BUFFER */ | |
1da177e4 | 2887 | #ifdef CY_DEBUG_IO |
21719191 JS |
2888 | printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n", |
2889 | info->line, info->xmit_cnt); | |
1da177e4 | 2890 | #endif |
02f1175c | 2891 | return info->xmit_cnt; |
1da177e4 | 2892 | #ifdef Z_EXT_CHARS_IN_BUFFER |
02f1175c | 2893 | } else { |
ad39c300 JS |
2894 | static struct FIRM_ID *firm_id; |
2895 | static struct ZFW_CTRL *zfw_ctrl; | |
2896 | static struct CH_CTRL *ch_ctrl; | |
2897 | static struct BUF_CTRL *buf_ctrl; | |
02f1175c | 2898 | int char_count; |
ad39c300 | 2899 | __u32 tx_put, tx_get, tx_bufsize; |
02f1175c | 2900 | |
875b206b JS |
2901 | firm_id = card->base_addr + ID_ADDRESS; |
2902 | zfw_ctrl = card->base_addr + | |
db05c3b1 | 2903 | (readl(&firm_id->zfwctrl_addr) & 0xfffff); |
02f1175c JS |
2904 | ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]); |
2905 | buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]); | |
2906 | ||
db05c3b1 JS |
2907 | tx_get = readl(&buf_ctrl->tx_get); |
2908 | tx_put = readl(&buf_ctrl->tx_put); | |
2909 | tx_bufsize = readl(&buf_ctrl->tx_bufsize); | |
02f1175c JS |
2910 | if (tx_put >= tx_get) |
2911 | char_count = tx_put - tx_get; | |
2912 | else | |
2913 | char_count = tx_put - tx_get + tx_bufsize; | |
1da177e4 | 2914 | #ifdef CY_DEBUG_IO |
21719191 JS |
2915 | printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n", |
2916 | info->line, info->xmit_cnt + char_count); | |
1da177e4 | 2917 | #endif |
096dcfce | 2918 | return info->xmit_cnt + char_count; |
02f1175c JS |
2919 | } |
2920 | #endif /* Z_EXT_CHARS_IN_BUFFER */ | |
2921 | } /* cy_chars_in_buffer */ | |
1da177e4 LT |
2922 | |
2923 | /* | |
2924 | * ------------------------------------------------------------ | |
2925 | * cy_ioctl() and friends | |
2926 | * ------------------------------------------------------------ | |
2927 | */ | |
2928 | ||
1a86b5e3 | 2929 | static void cyy_baud_calc(struct cyclades_port *info, __u32 baud) |
1da177e4 | 2930 | { |
02f1175c | 2931 | int co, co_val, bpr; |
1a86b5e3 | 2932 | __u32 cy_clock = ((info->chip_rev >= CD1400_REV_J) ? 60000000 : |
02f1175c | 2933 | 25000000); |
1da177e4 | 2934 | |
02f1175c JS |
2935 | if (baud == 0) { |
2936 | info->tbpr = info->tco = info->rbpr = info->rco = 0; | |
2937 | return; | |
2938 | } | |
1da177e4 | 2939 | |
02f1175c JS |
2940 | /* determine which prescaler to use */ |
2941 | for (co = 4, co_val = 2048; co; co--, co_val >>= 2) { | |
2942 | if (cy_clock / co_val / baud > 63) | |
2943 | break; | |
2944 | } | |
1da177e4 | 2945 | |
02f1175c JS |
2946 | bpr = (cy_clock / co_val * 2 / baud + 1) / 2; |
2947 | if (bpr > 255) | |
2948 | bpr = 255; | |
1da177e4 | 2949 | |
02f1175c JS |
2950 | info->tbpr = info->rbpr = bpr; |
2951 | info->tco = info->rco = co; | |
1da177e4 LT |
2952 | } |
2953 | ||
2954 | /* | |
2955 | * This routine finds or computes the various line characteristics. | |
2956 | * It used to be called config_setup | |
2957 | */ | |
02f1175c | 2958 | static void set_line_char(struct cyclades_port *info) |
1da177e4 | 2959 | { |
875b206b | 2960 | struct cyclades_card *card; |
02f1175c JS |
2961 | unsigned long flags; |
2962 | void __iomem *base_addr; | |
875b206b | 2963 | int chip, channel, index; |
02f1175c JS |
2964 | unsigned cflag, iflag; |
2965 | unsigned short chip_number; | |
2966 | int baud, baud_rate = 0; | |
2967 | int i; | |
2968 | ||
2969 | if (!info->tty || !info->tty->termios) { | |
2970 | return; | |
1da177e4 | 2971 | } |
02f1175c JS |
2972 | if (info->line == -1) { |
2973 | return; | |
1da177e4 | 2974 | } |
02f1175c JS |
2975 | cflag = info->tty->termios->c_cflag; |
2976 | iflag = info->tty->termios->c_iflag; | |
1da177e4 | 2977 | |
02f1175c JS |
2978 | /* |
2979 | * Set up the tty->alt_speed kludge | |
2980 | */ | |
2981 | if (info->tty) { | |
2982 | if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) | |
2983 | info->tty->alt_speed = 57600; | |
2984 | if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) | |
2985 | info->tty->alt_speed = 115200; | |
2986 | if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) | |
2987 | info->tty->alt_speed = 230400; | |
2988 | if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) | |
2989 | info->tty->alt_speed = 460800; | |
1da177e4 | 2990 | } |
02f1175c JS |
2991 | |
2992 | card = info->card; | |
875b206b | 2993 | channel = info->line - card->first_line; |
02f1175c JS |
2994 | chip_number = channel / 4; |
2995 | ||
875b206b | 2996 | if (!IS_CYC_Z(*card)) { |
02f1175c | 2997 | |
875b206b | 2998 | index = card->bus_index; |
02f1175c JS |
2999 | |
3000 | /* baud rate */ | |
3001 | baud = tty_get_baud_rate(info->tty); | |
3002 | if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) == | |
3003 | ASYNC_SPD_CUST) { | |
3004 | if (info->custom_divisor) | |
3005 | baud_rate = info->baud / info->custom_divisor; | |
3006 | else | |
3007 | baud_rate = info->baud; | |
3008 | } else if (baud > CD1400_MAX_SPEED) { | |
3009 | baud = CD1400_MAX_SPEED; | |
3010 | } | |
3011 | /* find the baud index */ | |
3012 | for (i = 0; i < 20; i++) { | |
3013 | if (baud == baud_table[i]) { | |
3014 | break; | |
3015 | } | |
3016 | } | |
3017 | if (i == 20) { | |
3018 | i = 19; /* CD1400_MAX_SPEED */ | |
3019 | } | |
3020 | ||
3021 | if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) == | |
3022 | ASYNC_SPD_CUST) { | |
3023 | cyy_baud_calc(info, baud_rate); | |
3024 | } else { | |
3025 | if (info->chip_rev >= CD1400_REV_J) { | |
3026 | /* It is a CD1400 rev. J or later */ | |
3027 | info->tbpr = baud_bpr_60[i]; /* Tx BPR */ | |
3028 | info->tco = baud_co_60[i]; /* Tx CO */ | |
3029 | info->rbpr = baud_bpr_60[i]; /* Rx BPR */ | |
3030 | info->rco = baud_co_60[i]; /* Rx CO */ | |
3031 | } else { | |
3032 | info->tbpr = baud_bpr_25[i]; /* Tx BPR */ | |
3033 | info->tco = baud_co_25[i]; /* Tx CO */ | |
3034 | info->rbpr = baud_bpr_25[i]; /* Rx BPR */ | |
3035 | info->rco = baud_co_25[i]; /* Rx CO */ | |
3036 | } | |
3037 | } | |
3038 | if (baud_table[i] == 134) { | |
3039 | /* get it right for 134.5 baud */ | |
3040 | info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) + | |
3041 | 2; | |
3042 | } else if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) == | |
3043 | ASYNC_SPD_CUST) { | |
3044 | info->timeout = (info->xmit_fifo_size * HZ * 15 / | |
3045 | baud_rate) + 2; | |
3046 | } else if (baud_table[i]) { | |
3047 | info->timeout = (info->xmit_fifo_size * HZ * 15 / | |
3048 | baud_table[i]) + 2; | |
3049 | /* this needs to be propagated into the card info */ | |
3050 | } else { | |
3051 | info->timeout = 0; | |
3052 | } | |
3053 | /* By tradition (is it a standard?) a baud rate of zero | |
3054 | implies the line should be/has been closed. A bit | |
3055 | later in this routine such a test is performed. */ | |
3056 | ||
3057 | /* byte size and parity */ | |
3058 | info->cor5 = 0; | |
3059 | info->cor4 = 0; | |
3060 | /* receive threshold */ | |
3061 | info->cor3 = (info->default_threshold ? | |
3062 | info->default_threshold : baud_cor3[i]); | |
3063 | info->cor2 = CyETC; | |
3064 | switch (cflag & CSIZE) { | |
3065 | case CS5: | |
3066 | info->cor1 = Cy_5_BITS; | |
3067 | break; | |
3068 | case CS6: | |
3069 | info->cor1 = Cy_6_BITS; | |
3070 | break; | |
3071 | case CS7: | |
3072 | info->cor1 = Cy_7_BITS; | |
3073 | break; | |
3074 | case CS8: | |
3075 | info->cor1 = Cy_8_BITS; | |
3076 | break; | |
3077 | } | |
3078 | if (cflag & CSTOPB) { | |
3079 | info->cor1 |= Cy_2_STOP; | |
3080 | } | |
3081 | if (cflag & PARENB) { | |
3082 | if (cflag & PARODD) { | |
3083 | info->cor1 |= CyPARITY_O; | |
3084 | } else { | |
3085 | info->cor1 |= CyPARITY_E; | |
3086 | } | |
3087 | } else { | |
3088 | info->cor1 |= CyPARITY_NONE; | |
3089 | } | |
3090 | ||
3091 | /* CTS flow control flag */ | |
3092 | if (cflag & CRTSCTS) { | |
3093 | info->flags |= ASYNC_CTS_FLOW; | |
3094 | info->cor2 |= CyCtsAE; | |
3095 | } else { | |
3096 | info->flags &= ~ASYNC_CTS_FLOW; | |
3097 | info->cor2 &= ~CyCtsAE; | |
3098 | } | |
3099 | if (cflag & CLOCAL) | |
3100 | info->flags &= ~ASYNC_CHECK_CD; | |
3101 | else | |
3102 | info->flags |= ASYNC_CHECK_CD; | |
1da177e4 LT |
3103 | |
3104 | /*********************************************** | |
3105 | The hardware option, CyRtsAO, presents RTS when | |
3106 | the chip has characters to send. Since most modems | |
3107 | use RTS as reverse (inbound) flow control, this | |
3108 | option is not used. If inbound flow control is | |
3109 | necessary, DTR can be programmed to provide the | |
3110 | appropriate signals for use with a non-standard | |
3111 | cable. Contact Marcio Saito for details. | |
3112 | ***********************************************/ | |
3113 | ||
02f1175c JS |
3114 | chip = channel >> 2; |
3115 | channel &= 0x03; | |
875b206b | 3116 | base_addr = card->base_addr + (cy_chip_offset[chip] << index); |
1da177e4 | 3117 | |
9fa1b3b1 | 3118 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
3119 | cy_writeb(base_addr + (CyCAR << index), (u_char) channel); |
3120 | ||
3121 | /* tx and rx baud rate */ | |
3122 | ||
3123 | cy_writeb(base_addr + (CyTCOR << index), info->tco); | |
3124 | cy_writeb(base_addr + (CyTBPR << index), info->tbpr); | |
3125 | cy_writeb(base_addr + (CyRCOR << index), info->rco); | |
3126 | cy_writeb(base_addr + (CyRBPR << index), info->rbpr); | |
3127 | ||
3128 | /* set line characteristics according configuration */ | |
3129 | ||
3130 | cy_writeb(base_addr + (CySCHR1 << index), | |
3131 | START_CHAR(info->tty)); | |
3132 | cy_writeb(base_addr + (CySCHR2 << index), STOP_CHAR(info->tty)); | |
3133 | cy_writeb(base_addr + (CyCOR1 << index), info->cor1); | |
3134 | cy_writeb(base_addr + (CyCOR2 << index), info->cor2); | |
3135 | cy_writeb(base_addr + (CyCOR3 << index), info->cor3); | |
3136 | cy_writeb(base_addr + (CyCOR4 << index), info->cor4); | |
3137 | cy_writeb(base_addr + (CyCOR5 << index), info->cor5); | |
3138 | ||
3139 | cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR1ch | CyCOR2ch | | |
3140 | CyCOR3ch, index); | |
3141 | ||
3142 | cy_writeb(base_addr + (CyCAR << index), (u_char) channel); /* !!! Is this needed? */ | |
3143 | cy_writeb(base_addr + (CyRTPR << index), | |
3144 | (info->default_timeout ? info->default_timeout : 0x02)); | |
3145 | /* 10ms rx timeout */ | |
3146 | ||
3147 | if (C_CLOCAL(info->tty)) { | |
3148 | /* without modem intr */ | |
3149 | cy_writeb(base_addr + (CySRER << index), | |
db05c3b1 | 3150 | readb(base_addr + (CySRER << index)) | CyMdmCh); |
02f1175c JS |
3151 | /* act on 1->0 modem transitions */ |
3152 | if ((cflag & CRTSCTS) && info->rflow) { | |
3153 | cy_writeb(base_addr + (CyMCOR1 << index), | |
3154 | (CyCTS | rflow_thr[i])); | |
3155 | } else { | |
3156 | cy_writeb(base_addr + (CyMCOR1 << index), | |
3157 | CyCTS); | |
3158 | } | |
3159 | /* act on 0->1 modem transitions */ | |
3160 | cy_writeb(base_addr + (CyMCOR2 << index), CyCTS); | |
1da177e4 | 3161 | } else { |
02f1175c JS |
3162 | /* without modem intr */ |
3163 | cy_writeb(base_addr + (CySRER << index), | |
db05c3b1 | 3164 | readb(base_addr + |
02f1175c JS |
3165 | (CySRER << index)) | CyMdmCh); |
3166 | /* act on 1->0 modem transitions */ | |
3167 | if ((cflag & CRTSCTS) && info->rflow) { | |
3168 | cy_writeb(base_addr + (CyMCOR1 << index), | |
3169 | (CyDSR | CyCTS | CyRI | CyDCD | | |
3170 | rflow_thr[i])); | |
3171 | } else { | |
3172 | cy_writeb(base_addr + (CyMCOR1 << index), | |
3173 | CyDSR | CyCTS | CyRI | CyDCD); | |
3174 | } | |
3175 | /* act on 0->1 modem transitions */ | |
3176 | cy_writeb(base_addr + (CyMCOR2 << index), | |
3177 | CyDSR | CyCTS | CyRI | CyDCD); | |
1da177e4 | 3178 | } |
02f1175c JS |
3179 | |
3180 | if (i == 0) { /* baud rate is zero, turn off line */ | |
3181 | if (info->rtsdtr_inv) { | |
3182 | cy_writeb(base_addr + (CyMSVR1 << index), | |
3183 | ~CyRTS); | |
3184 | } else { | |
3185 | cy_writeb(base_addr + (CyMSVR2 << index), | |
3186 | ~CyDTR); | |
3187 | } | |
1da177e4 | 3188 | #ifdef CY_DEBUG_DTR |
21719191 JS |
3189 | printk(KERN_DEBUG "cyc:set_line_char dropping DTR\n"); |
3190 | printk(KERN_DEBUG " status: 0x%x, 0x%x\n", | |
db05c3b1 JS |
3191 | readb(base_addr + (CyMSVR1 << index)), |
3192 | readb(base_addr + (CyMSVR2 << index))); | |
1da177e4 | 3193 | #endif |
02f1175c JS |
3194 | } else { |
3195 | if (info->rtsdtr_inv) { | |
3196 | cy_writeb(base_addr + (CyMSVR1 << index), | |
3197 | CyRTS); | |
3198 | } else { | |
3199 | cy_writeb(base_addr + (CyMSVR2 << index), | |
3200 | CyDTR); | |
3201 | } | |
1da177e4 | 3202 | #ifdef CY_DEBUG_DTR |
21719191 JS |
3203 | printk(KERN_DEBUG "cyc:set_line_char raising DTR\n"); |
3204 | printk(KERN_DEBUG " status: 0x%x, 0x%x\n", | |
db05c3b1 JS |
3205 | readb(base_addr + (CyMSVR1 << index)), |
3206 | readb(base_addr + (CyMSVR2 << index))); | |
1da177e4 | 3207 | #endif |
02f1175c | 3208 | } |
1da177e4 | 3209 | |
02f1175c JS |
3210 | if (info->tty) { |
3211 | clear_bit(TTY_IO_ERROR, &info->tty->flags); | |
3212 | } | |
9fa1b3b1 | 3213 | spin_unlock_irqrestore(&card->card_lock, flags); |
1da177e4 | 3214 | |
1da177e4 | 3215 | } else { |
02f1175c JS |
3216 | struct FIRM_ID __iomem *firm_id; |
3217 | struct ZFW_CTRL __iomem *zfw_ctrl; | |
3218 | struct BOARD_CTRL __iomem *board_ctrl; | |
3219 | struct CH_CTRL __iomem *ch_ctrl; | |
3220 | struct BUF_CTRL __iomem *buf_ctrl; | |
1a86b5e3 | 3221 | __u32 sw_flow; |
02f1175c | 3222 | int retval; |
1da177e4 | 3223 | |
875b206b JS |
3224 | firm_id = card->base_addr + ID_ADDRESS; |
3225 | if (!ISZLOADED(*card)) { | |
02f1175c JS |
3226 | return; |
3227 | } | |
1da177e4 | 3228 | |
875b206b | 3229 | zfw_ctrl = card->base_addr + |
db05c3b1 | 3230 | (readl(&firm_id->zfwctrl_addr) & 0xfffff); |
02f1175c JS |
3231 | board_ctrl = &zfw_ctrl->board_ctrl; |
3232 | ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]); | |
3233 | buf_ctrl = &zfw_ctrl->buf_ctrl[channel]; | |
3234 | ||
3235 | /* baud rate */ | |
3236 | baud = tty_get_baud_rate(info->tty); | |
3237 | if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) == | |
3238 | ASYNC_SPD_CUST) { | |
3239 | if (info->custom_divisor) | |
3240 | baud_rate = info->baud / info->custom_divisor; | |
3241 | else | |
3242 | baud_rate = info->baud; | |
3243 | } else if (baud > CYZ_MAX_SPEED) { | |
3244 | baud = CYZ_MAX_SPEED; | |
3245 | } | |
3246 | cy_writel(&ch_ctrl->comm_baud, baud); | |
3247 | ||
3248 | if (baud == 134) { | |
3249 | /* get it right for 134.5 baud */ | |
3250 | info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) + | |
3251 | 2; | |
3252 | } else if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) == | |
3253 | ASYNC_SPD_CUST) { | |
3254 | info->timeout = (info->xmit_fifo_size * HZ * 15 / | |
3255 | baud_rate) + 2; | |
3256 | } else if (baud) { | |
3257 | info->timeout = (info->xmit_fifo_size * HZ * 15 / | |
3258 | baud) + 2; | |
3259 | /* this needs to be propagated into the card info */ | |
3260 | } else { | |
3261 | info->timeout = 0; | |
3262 | } | |
1da177e4 | 3263 | |
02f1175c JS |
3264 | /* byte size and parity */ |
3265 | switch (cflag & CSIZE) { | |
3266 | case CS5: | |
3267 | cy_writel(&ch_ctrl->comm_data_l, C_DL_CS5); | |
3268 | break; | |
3269 | case CS6: | |
3270 | cy_writel(&ch_ctrl->comm_data_l, C_DL_CS6); | |
3271 | break; | |
3272 | case CS7: | |
3273 | cy_writel(&ch_ctrl->comm_data_l, C_DL_CS7); | |
3274 | break; | |
3275 | case CS8: | |
3276 | cy_writel(&ch_ctrl->comm_data_l, C_DL_CS8); | |
3277 | break; | |
3278 | } | |
3279 | if (cflag & CSTOPB) { | |
3280 | cy_writel(&ch_ctrl->comm_data_l, | |
db05c3b1 | 3281 | readl(&ch_ctrl->comm_data_l) | C_DL_2STOP); |
02f1175c JS |
3282 | } else { |
3283 | cy_writel(&ch_ctrl->comm_data_l, | |
db05c3b1 | 3284 | readl(&ch_ctrl->comm_data_l) | C_DL_1STOP); |
02f1175c JS |
3285 | } |
3286 | if (cflag & PARENB) { | |
3287 | if (cflag & PARODD) { | |
3288 | cy_writel(&ch_ctrl->comm_parity, C_PR_ODD); | |
3289 | } else { | |
3290 | cy_writel(&ch_ctrl->comm_parity, C_PR_EVEN); | |
3291 | } | |
3292 | } else { | |
3293 | cy_writel(&ch_ctrl->comm_parity, C_PR_NONE); | |
3294 | } | |
1da177e4 | 3295 | |
02f1175c JS |
3296 | /* CTS flow control flag */ |
3297 | if (cflag & CRTSCTS) { | |
3298 | cy_writel(&ch_ctrl->hw_flow, | |
db05c3b1 | 3299 | readl(&ch_ctrl->hw_flow) | C_RS_CTS | C_RS_RTS); |
02f1175c | 3300 | } else { |
db05c3b1 JS |
3301 | cy_writel(&ch_ctrl->hw_flow, readl(&ch_ctrl->hw_flow) & |
3302 | ~(C_RS_CTS | C_RS_RTS)); | |
02f1175c JS |
3303 | } |
3304 | /* As the HW flow control is done in firmware, the driver | |
3305 | doesn't need to care about it */ | |
3306 | info->flags &= ~ASYNC_CTS_FLOW; | |
3307 | ||
3308 | /* XON/XOFF/XANY flow control flags */ | |
3309 | sw_flow = 0; | |
3310 | if (iflag & IXON) { | |
3311 | sw_flow |= C_FL_OXX; | |
3312 | if (iflag & IXANY) | |
3313 | sw_flow |= C_FL_OIXANY; | |
3314 | } | |
3315 | cy_writel(&ch_ctrl->sw_flow, sw_flow); | |
3316 | ||
875b206b | 3317 | retval = cyz_issue_cmd(card, channel, C_CM_IOCTL, 0L); |
02f1175c | 3318 | if (retval != 0) { |
21719191 JS |
3319 | printk(KERN_ERR "cyc:set_line_char retval on ttyC%d " |
3320 | "was %x\n", info->line, retval); | |
02f1175c JS |
3321 | } |
3322 | ||
3323 | /* CD sensitivity */ | |
3324 | if (cflag & CLOCAL) { | |
3325 | info->flags &= ~ASYNC_CHECK_CD; | |
3326 | } else { | |
3327 | info->flags |= ASYNC_CHECK_CD; | |
3328 | } | |
1da177e4 | 3329 | |
02f1175c JS |
3330 | if (baud == 0) { /* baud rate is zero, turn off line */ |
3331 | cy_writel(&ch_ctrl->rs_control, | |
db05c3b1 | 3332 | readl(&ch_ctrl->rs_control) & ~C_RS_DTR); |
1da177e4 | 3333 | #ifdef CY_DEBUG_DTR |
21719191 | 3334 | printk(KERN_DEBUG "cyc:set_line_char dropping Z DTR\n"); |
1da177e4 | 3335 | #endif |
02f1175c JS |
3336 | } else { |
3337 | cy_writel(&ch_ctrl->rs_control, | |
db05c3b1 | 3338 | readl(&ch_ctrl->rs_control) | C_RS_DTR); |
1da177e4 | 3339 | #ifdef CY_DEBUG_DTR |
21719191 | 3340 | printk(KERN_DEBUG "cyc:set_line_char raising Z DTR\n"); |
1da177e4 | 3341 | #endif |
02f1175c | 3342 | } |
1da177e4 | 3343 | |
875b206b | 3344 | retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM,0L); |
02f1175c | 3345 | if (retval != 0) { |
21719191 JS |
3346 | printk(KERN_ERR "cyc:set_line_char(2) retval on ttyC%d " |
3347 | "was %x\n", info->line, retval); | |
02f1175c | 3348 | } |
1da177e4 | 3349 | |
02f1175c JS |
3350 | if (info->tty) { |
3351 | clear_bit(TTY_IO_ERROR, &info->tty->flags); | |
3352 | } | |
1da177e4 | 3353 | } |
02f1175c | 3354 | } /* set_line_char */ |
1da177e4 LT |
3355 | |
3356 | static int | |
02f1175c JS |
3357 | get_serial_info(struct cyclades_port *info, |
3358 | struct serial_struct __user * retinfo) | |
1da177e4 | 3359 | { |
02f1175c | 3360 | struct serial_struct tmp; |
875b206b | 3361 | struct cyclades_card *cinfo = info->card; |
1da177e4 | 3362 | |
02f1175c JS |
3363 | if (!retinfo) |
3364 | return -EFAULT; | |
3365 | memset(&tmp, 0, sizeof(tmp)); | |
3366 | tmp.type = info->type; | |
3367 | tmp.line = info->line; | |
875b206b JS |
3368 | tmp.port = (info->card - cy_card) * 0x100 + info->line - |
3369 | cinfo->first_line; | |
02f1175c JS |
3370 | tmp.irq = cinfo->irq; |
3371 | tmp.flags = info->flags; | |
3372 | tmp.close_delay = info->close_delay; | |
d5dedf99 | 3373 | tmp.closing_wait = info->closing_wait; |
02f1175c JS |
3374 | tmp.baud_base = info->baud; |
3375 | tmp.custom_divisor = info->custom_divisor; | |
3376 | tmp.hub6 = 0; /*!!! */ | |
3377 | return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0; | |
3378 | } /* get_serial_info */ | |
1da177e4 LT |
3379 | |
3380 | static int | |
02f1175c JS |
3381 | set_serial_info(struct cyclades_port *info, |
3382 | struct serial_struct __user * new_info) | |
1da177e4 | 3383 | { |
02f1175c JS |
3384 | struct serial_struct new_serial; |
3385 | struct cyclades_port old_info; | |
3386 | ||
3387 | if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) | |
3388 | return -EFAULT; | |
3389 | old_info = *info; | |
3390 | ||
3391 | if (!capable(CAP_SYS_ADMIN)) { | |
3392 | if (new_serial.close_delay != info->close_delay || | |
3393 | new_serial.baud_base != info->baud || | |
3394 | (new_serial.flags & ASYNC_FLAGS & | |
3395 | ~ASYNC_USR_MASK) != | |
3396 | (info->flags & ASYNC_FLAGS & ~ASYNC_USR_MASK)) | |
3397 | return -EPERM; | |
3398 | info->flags = (info->flags & ~ASYNC_USR_MASK) | | |
3399 | (new_serial.flags & ASYNC_USR_MASK); | |
3400 | info->baud = new_serial.baud_base; | |
3401 | info->custom_divisor = new_serial.custom_divisor; | |
3402 | goto check_and_exit; | |
3403 | } | |
3404 | ||
3405 | /* | |
3406 | * OK, past this point, all the error checking has been done. | |
3407 | * At this point, we start making changes..... | |
3408 | */ | |
3409 | ||
3410 | info->baud = new_serial.baud_base; | |
3411 | info->custom_divisor = new_serial.custom_divisor; | |
3412 | info->flags = (info->flags & ~ASYNC_FLAGS) | | |
3413 | (new_serial.flags & ASYNC_FLAGS); | |
3414 | info->close_delay = new_serial.close_delay * HZ / 100; | |
3415 | info->closing_wait = new_serial.closing_wait * HZ / 100; | |
1da177e4 LT |
3416 | |
3417 | check_and_exit: | |
02f1175c JS |
3418 | if (info->flags & ASYNC_INITIALIZED) { |
3419 | set_line_char(info); | |
3420 | return 0; | |
3421 | } else { | |
3422 | return startup(info); | |
3423 | } | |
3424 | } /* set_serial_info */ | |
1da177e4 LT |
3425 | |
3426 | /* | |
3427 | * get_lsr_info - get line status register info | |
3428 | * | |
3429 | * Purpose: Let user call ioctl() to get info when the UART physically | |
3430 | * is emptied. On bus types like RS485, the transmitter must | |
3431 | * release the bus after transmitting. This must be done when | |
3432 | * the transmit shift register is empty, not be done when the | |
3433 | * transmit holding register is empty. This functionality | |
3434 | * allows an RS485 driver to be written in user space. | |
3435 | */ | |
02f1175c | 3436 | static int get_lsr_info(struct cyclades_port *info, unsigned int __user * value) |
1da177e4 | 3437 | { |
875b206b JS |
3438 | struct cyclades_card *card; |
3439 | int chip, channel, index; | |
02f1175c JS |
3440 | unsigned char status; |
3441 | unsigned int result; | |
3442 | unsigned long flags; | |
3443 | void __iomem *base_addr; | |
1da177e4 | 3444 | |
02f1175c | 3445 | card = info->card; |
875b206b JS |
3446 | channel = (info->line) - (card->first_line); |
3447 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
3448 | chip = channel >> 2; |
3449 | channel &= 0x03; | |
875b206b JS |
3450 | index = card->bus_index; |
3451 | base_addr = card->base_addr + (cy_chip_offset[chip] << index); | |
02f1175c | 3452 | |
9fa1b3b1 | 3453 | spin_lock_irqsave(&card->card_lock, flags); |
db05c3b1 | 3454 | status = readb(base_addr + (CySRER << index)) & |
02f1175c | 3455 | (CyTxRdy | CyTxMpty); |
9fa1b3b1 | 3456 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3457 | result = (status ? 0 : TIOCSER_TEMT); |
3458 | } else { | |
3459 | /* Not supported yet */ | |
3460 | return -EINVAL; | |
3461 | } | |
3462 | return put_user(result, (unsigned long __user *)value); | |
1da177e4 LT |
3463 | } |
3464 | ||
02f1175c | 3465 | static int cy_tiocmget(struct tty_struct *tty, struct file *file) |
1da177e4 | 3466 | { |
cab9bdd1 | 3467 | struct cyclades_port *info = tty->driver_data; |
875b206b JS |
3468 | struct cyclades_card *card; |
3469 | int chip, channel, index; | |
02f1175c JS |
3470 | void __iomem *base_addr; |
3471 | unsigned long flags; | |
3472 | unsigned char status; | |
3473 | unsigned long lstatus; | |
3474 | unsigned int result; | |
3475 | struct FIRM_ID __iomem *firm_id; | |
3476 | struct ZFW_CTRL __iomem *zfw_ctrl; | |
3477 | struct BOARD_CTRL __iomem *board_ctrl; | |
3478 | struct CH_CTRL __iomem *ch_ctrl; | |
3479 | ||
3480 | if (serial_paranoia_check(info, tty->name, __FUNCTION__)) | |
3481 | return -ENODEV; | |
1da177e4 | 3482 | |
02f1175c | 3483 | card = info->card; |
875b206b JS |
3484 | channel = info->line - card->first_line; |
3485 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
3486 | chip = channel >> 2; |
3487 | channel &= 0x03; | |
875b206b JS |
3488 | index = card->bus_index; |
3489 | base_addr = card->base_addr + (cy_chip_offset[chip] << index); | |
1da177e4 | 3490 | |
9fa1b3b1 | 3491 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c | 3492 | cy_writeb(base_addr + (CyCAR << index), (u_char) channel); |
db05c3b1 JS |
3493 | status = readb(base_addr + (CyMSVR1 << index)); |
3494 | status |= readb(base_addr + (CyMSVR2 << index)); | |
9fa1b3b1 | 3495 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3496 | |
3497 | if (info->rtsdtr_inv) { | |
3498 | result = ((status & CyRTS) ? TIOCM_DTR : 0) | | |
3499 | ((status & CyDTR) ? TIOCM_RTS : 0); | |
3500 | } else { | |
3501 | result = ((status & CyRTS) ? TIOCM_RTS : 0) | | |
3502 | ((status & CyDTR) ? TIOCM_DTR : 0); | |
3503 | } | |
3504 | result |= ((status & CyDCD) ? TIOCM_CAR : 0) | | |
3505 | ((status & CyRI) ? TIOCM_RNG : 0) | | |
3506 | ((status & CyDSR) ? TIOCM_DSR : 0) | | |
3507 | ((status & CyCTS) ? TIOCM_CTS : 0); | |
1da177e4 | 3508 | } else { |
875b206b JS |
3509 | base_addr = card->base_addr; |
3510 | firm_id = card->base_addr + ID_ADDRESS; | |
3511 | if (ISZLOADED(*card)) { | |
3512 | zfw_ctrl = card->base_addr + | |
db05c3b1 | 3513 | (readl(&firm_id->zfwctrl_addr) & 0xfffff); |
02f1175c JS |
3514 | board_ctrl = &zfw_ctrl->board_ctrl; |
3515 | ch_ctrl = zfw_ctrl->ch_ctrl; | |
db05c3b1 | 3516 | lstatus = readl(&ch_ctrl[channel].rs_status); |
02f1175c JS |
3517 | result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) | |
3518 | ((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) | | |
3519 | ((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) | | |
3520 | ((lstatus & C_RS_RI) ? TIOCM_RNG : 0) | | |
3521 | ((lstatus & C_RS_DSR) ? TIOCM_DSR : 0) | | |
3522 | ((lstatus & C_RS_CTS) ? TIOCM_CTS : 0); | |
3523 | } else { | |
3524 | result = 0; | |
3525 | return -ENODEV; | |
3526 | } | |
1da177e4 | 3527 | |
02f1175c JS |
3528 | } |
3529 | return result; | |
3530 | } /* cy_tiomget */ | |
1da177e4 LT |
3531 | |
3532 | static int | |
3533 | cy_tiocmset(struct tty_struct *tty, struct file *file, | |
02f1175c | 3534 | unsigned int set, unsigned int clear) |
1da177e4 | 3535 | { |
cab9bdd1 | 3536 | struct cyclades_port *info = tty->driver_data; |
875b206b JS |
3537 | struct cyclades_card *card; |
3538 | int chip, channel, index; | |
02f1175c JS |
3539 | void __iomem *base_addr; |
3540 | unsigned long flags; | |
3541 | struct FIRM_ID __iomem *firm_id; | |
3542 | struct ZFW_CTRL __iomem *zfw_ctrl; | |
3543 | struct BOARD_CTRL __iomem *board_ctrl; | |
3544 | struct CH_CTRL __iomem *ch_ctrl; | |
3545 | int retval; | |
3546 | ||
3547 | if (serial_paranoia_check(info, tty->name, __FUNCTION__)) | |
3548 | return -ENODEV; | |
3549 | ||
3550 | card = info->card; | |
875b206b JS |
3551 | channel = (info->line) - (card->first_line); |
3552 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
3553 | chip = channel >> 2; |
3554 | channel &= 0x03; | |
875b206b JS |
3555 | index = card->bus_index; |
3556 | base_addr = card->base_addr + (cy_chip_offset[chip] << index); | |
02f1175c JS |
3557 | |
3558 | if (set & TIOCM_RTS) { | |
9fa1b3b1 | 3559 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
3560 | cy_writeb(base_addr + (CyCAR << index), |
3561 | (u_char) channel); | |
3562 | if (info->rtsdtr_inv) { | |
3563 | cy_writeb(base_addr + (CyMSVR2 << index), | |
3564 | CyDTR); | |
3565 | } else { | |
3566 | cy_writeb(base_addr + (CyMSVR1 << index), | |
3567 | CyRTS); | |
3568 | } | |
9fa1b3b1 | 3569 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3570 | } |
3571 | if (clear & TIOCM_RTS) { | |
9fa1b3b1 | 3572 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
3573 | cy_writeb(base_addr + (CyCAR << index), |
3574 | (u_char) channel); | |
3575 | if (info->rtsdtr_inv) { | |
3576 | cy_writeb(base_addr + (CyMSVR2 << index), | |
3577 | ~CyDTR); | |
3578 | } else { | |
3579 | cy_writeb(base_addr + (CyMSVR1 << index), | |
3580 | ~CyRTS); | |
3581 | } | |
9fa1b3b1 | 3582 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3583 | } |
3584 | if (set & TIOCM_DTR) { | |
9fa1b3b1 | 3585 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
3586 | cy_writeb(base_addr + (CyCAR << index), |
3587 | (u_char) channel); | |
3588 | if (info->rtsdtr_inv) { | |
3589 | cy_writeb(base_addr + (CyMSVR1 << index), | |
3590 | CyRTS); | |
3591 | } else { | |
3592 | cy_writeb(base_addr + (CyMSVR2 << index), | |
3593 | CyDTR); | |
3594 | } | |
1da177e4 | 3595 | #ifdef CY_DEBUG_DTR |
21719191 JS |
3596 | printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n"); |
3597 | printk(KERN_DEBUG " status: 0x%x, 0x%x\n", | |
db05c3b1 JS |
3598 | readb(base_addr + (CyMSVR1 << index)), |
3599 | readb(base_addr + (CyMSVR2 << index))); | |
1da177e4 | 3600 | #endif |
9fa1b3b1 | 3601 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3602 | } |
3603 | if (clear & TIOCM_DTR) { | |
9fa1b3b1 | 3604 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
3605 | cy_writeb(base_addr + (CyCAR << index), |
3606 | (u_char) channel); | |
3607 | if (info->rtsdtr_inv) { | |
3608 | cy_writeb(base_addr + (CyMSVR1 << index), | |
3609 | ~CyRTS); | |
3610 | } else { | |
3611 | cy_writeb(base_addr + (CyMSVR2 << index), | |
3612 | ~CyDTR); | |
3613 | } | |
1da177e4 LT |
3614 | |
3615 | #ifdef CY_DEBUG_DTR | |
21719191 JS |
3616 | printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n"); |
3617 | printk(KERN_DEBUG " status: 0x%x, 0x%x\n", | |
db05c3b1 JS |
3618 | readb(base_addr + (CyMSVR1 << index)), |
3619 | readb(base_addr + (CyMSVR2 << index))); | |
1da177e4 | 3620 | #endif |
9fa1b3b1 | 3621 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3622 | } |
3623 | } else { | |
875b206b | 3624 | base_addr = card->base_addr; |
02f1175c | 3625 | |
875b206b JS |
3626 | firm_id = card->base_addr + ID_ADDRESS; |
3627 | if (ISZLOADED(*card)) { | |
3628 | zfw_ctrl = card->base_addr + | |
db05c3b1 | 3629 | (readl(&firm_id->zfwctrl_addr) & 0xfffff); |
02f1175c JS |
3630 | board_ctrl = &zfw_ctrl->board_ctrl; |
3631 | ch_ctrl = zfw_ctrl->ch_ctrl; | |
3632 | ||
3633 | if (set & TIOCM_RTS) { | |
9fa1b3b1 | 3634 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c | 3635 | cy_writel(&ch_ctrl[channel].rs_control, |
db05c3b1 JS |
3636 | readl(&ch_ctrl[channel].rs_control) | |
3637 | C_RS_RTS); | |
9fa1b3b1 | 3638 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3639 | } |
3640 | if (clear & TIOCM_RTS) { | |
9fa1b3b1 | 3641 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c | 3642 | cy_writel(&ch_ctrl[channel].rs_control, |
db05c3b1 JS |
3643 | readl(&ch_ctrl[channel].rs_control) & |
3644 | ~C_RS_RTS); | |
9fa1b3b1 | 3645 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3646 | } |
3647 | if (set & TIOCM_DTR) { | |
9fa1b3b1 | 3648 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c | 3649 | cy_writel(&ch_ctrl[channel].rs_control, |
db05c3b1 JS |
3650 | readl(&ch_ctrl[channel].rs_control) | |
3651 | C_RS_DTR); | |
1da177e4 | 3652 | #ifdef CY_DEBUG_DTR |
21719191 JS |
3653 | printk(KERN_DEBUG "cyc:set_modem_info raising " |
3654 | "Z DTR\n"); | |
1da177e4 | 3655 | #endif |
9fa1b3b1 | 3656 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3657 | } |
3658 | if (clear & TIOCM_DTR) { | |
9fa1b3b1 | 3659 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c | 3660 | cy_writel(&ch_ctrl[channel].rs_control, |
db05c3b1 JS |
3661 | readl(&ch_ctrl[channel].rs_control) & |
3662 | ~C_RS_DTR); | |
1da177e4 | 3663 | #ifdef CY_DEBUG_DTR |
21719191 JS |
3664 | printk(KERN_DEBUG "cyc:set_modem_info clearing " |
3665 | "Z DTR\n"); | |
1da177e4 | 3666 | #endif |
9fa1b3b1 | 3667 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3668 | } |
3669 | } else { | |
3670 | return -ENODEV; | |
3671 | } | |
9fa1b3b1 JS |
3672 | spin_lock_irqsave(&card->card_lock, flags); |
3673 | retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L); | |
02f1175c | 3674 | if (retval != 0) { |
21719191 JS |
3675 | printk(KERN_ERR "cyc:set_modem_info retval on ttyC%d " |
3676 | "was %x\n", info->line, retval); | |
02f1175c | 3677 | } |
9fa1b3b1 | 3678 | spin_unlock_irqrestore(&card->card_lock, flags); |
1da177e4 | 3679 | } |
02f1175c JS |
3680 | return 0; |
3681 | } /* cy_tiocmset */ | |
1da177e4 LT |
3682 | |
3683 | /* | |
3684 | * cy_break() --- routine which turns the break handling on or off | |
3685 | */ | |
02f1175c | 3686 | static void cy_break(struct tty_struct *tty, int break_state) |
1da177e4 | 3687 | { |
cab9bdd1 | 3688 | struct cyclades_port *info = tty->driver_data; |
9fa1b3b1 | 3689 | struct cyclades_card *card; |
02f1175c | 3690 | unsigned long flags; |
1da177e4 | 3691 | |
02f1175c JS |
3692 | if (serial_paranoia_check(info, tty->name, "cy_break")) |
3693 | return; | |
1da177e4 | 3694 | |
9fa1b3b1 JS |
3695 | card = info->card; |
3696 | ||
3697 | spin_lock_irqsave(&card->card_lock, flags); | |
3698 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
3699 | /* Let the transmit ISR take care of this (since it |
3700 | requires stuffing characters into the output stream). | |
3701 | */ | |
3702 | if (break_state == -1) { | |
3703 | if (!info->breakon) { | |
3704 | info->breakon = 1; | |
3705 | if (!info->xmit_cnt) { | |
9fa1b3b1 | 3706 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c | 3707 | start_xmit(info); |
9fa1b3b1 | 3708 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
3709 | } |
3710 | } | |
3711 | } else { | |
3712 | if (!info->breakoff) { | |
3713 | info->breakoff = 1; | |
3714 | if (!info->xmit_cnt) { | |
9fa1b3b1 | 3715 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c | 3716 | start_xmit(info); |
9fa1b3b1 | 3717 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
3718 | } |
3719 | } | |
1da177e4 | 3720 | } |
1da177e4 | 3721 | } else { |
02f1175c JS |
3722 | int retval; |
3723 | ||
3724 | if (break_state == -1) { | |
9fa1b3b1 JS |
3725 | retval = cyz_issue_cmd(card, |
3726 | info->line - card->first_line, | |
02f1175c JS |
3727 | C_CM_SET_BREAK, 0L); |
3728 | if (retval != 0) { | |
21719191 JS |
3729 | printk(KERN_ERR "cyc:cy_break (set) retval on " |
3730 | "ttyC%d was %x\n", info->line, retval); | |
02f1175c JS |
3731 | } |
3732 | } else { | |
9fa1b3b1 JS |
3733 | retval = cyz_issue_cmd(card, |
3734 | info->line - card->first_line, | |
02f1175c JS |
3735 | C_CM_CLR_BREAK, 0L); |
3736 | if (retval != 0) { | |
21719191 JS |
3737 | printk(KERN_DEBUG "cyc:cy_break (clr) retval " |
3738 | "on ttyC%d was %x\n", info->line, | |
3739 | retval); | |
02f1175c | 3740 | } |
1da177e4 | 3741 | } |
1da177e4 | 3742 | } |
9fa1b3b1 | 3743 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c | 3744 | } /* cy_break */ |
1da177e4 LT |
3745 | |
3746 | static int | |
02f1175c | 3747 | get_mon_info(struct cyclades_port *info, struct cyclades_monitor __user * mon) |
1da177e4 LT |
3748 | { |
3749 | ||
02f1175c JS |
3750 | if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor))) |
3751 | return -EFAULT; | |
3752 | info->mon.int_count = 0; | |
3753 | info->mon.char_count = 0; | |
3754 | info->mon.char_max = 0; | |
3755 | info->mon.char_last = 0; | |
3756 | return 0; | |
3757 | } /* get_mon_info */ | |
1da177e4 | 3758 | |
02f1175c | 3759 | static int set_threshold(struct cyclades_port *info, unsigned long value) |
1da177e4 | 3760 | { |
875b206b | 3761 | struct cyclades_card *card; |
02f1175c | 3762 | void __iomem *base_addr; |
875b206b | 3763 | int channel, chip, index; |
02f1175c | 3764 | unsigned long flags; |
1da177e4 | 3765 | |
02f1175c | 3766 | card = info->card; |
875b206b JS |
3767 | channel = info->line - card->first_line; |
3768 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
3769 | chip = channel >> 2; |
3770 | channel &= 0x03; | |
875b206b | 3771 | index = card->bus_index; |
02f1175c | 3772 | base_addr = |
875b206b | 3773 | card->base_addr + (cy_chip_offset[chip] << index); |
02f1175c JS |
3774 | |
3775 | info->cor3 &= ~CyREC_FIFO; | |
3776 | info->cor3 |= value & CyREC_FIFO; | |
1da177e4 | 3777 | |
9fa1b3b1 | 3778 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
3779 | cy_writeb(base_addr + (CyCOR3 << index), info->cor3); |
3780 | cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR3ch, index); | |
9fa1b3b1 | 3781 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3782 | } |
3783 | return 0; | |
3784 | } /* set_threshold */ | |
1da177e4 LT |
3785 | |
3786 | static int | |
02f1175c | 3787 | get_threshold(struct cyclades_port *info, unsigned long __user * value) |
1da177e4 | 3788 | { |
875b206b | 3789 | struct cyclades_card *card; |
02f1175c | 3790 | void __iomem *base_addr; |
875b206b | 3791 | int channel, chip, index; |
02f1175c | 3792 | unsigned long tmp; |
1da177e4 | 3793 | |
02f1175c | 3794 | card = info->card; |
875b206b JS |
3795 | channel = info->line - card->first_line; |
3796 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
3797 | chip = channel >> 2; |
3798 | channel &= 0x03; | |
875b206b JS |
3799 | index = card->bus_index; |
3800 | base_addr = card->base_addr + (cy_chip_offset[chip] << index); | |
02f1175c | 3801 | |
db05c3b1 | 3802 | tmp = readb(base_addr + (CyCOR3 << index)) & CyREC_FIFO; |
02f1175c | 3803 | return put_user(tmp, value); |
02f1175c | 3804 | } |
f7429034 | 3805 | return 0; |
02f1175c | 3806 | } /* get_threshold */ |
1da177e4 LT |
3807 | |
3808 | static int | |
02f1175c | 3809 | set_default_threshold(struct cyclades_port *info, unsigned long value) |
1da177e4 | 3810 | { |
02f1175c JS |
3811 | info->default_threshold = value & 0x0f; |
3812 | return 0; | |
3813 | } /* set_default_threshold */ | |
1da177e4 LT |
3814 | |
3815 | static int | |
02f1175c | 3816 | get_default_threshold(struct cyclades_port *info, unsigned long __user * value) |
1da177e4 | 3817 | { |
02f1175c JS |
3818 | return put_user(info->default_threshold, value); |
3819 | } /* get_default_threshold */ | |
1da177e4 | 3820 | |
02f1175c | 3821 | static int set_timeout(struct cyclades_port *info, unsigned long value) |
1da177e4 | 3822 | { |
875b206b | 3823 | struct cyclades_card *card; |
02f1175c | 3824 | void __iomem *base_addr; |
875b206b | 3825 | int channel, chip, index; |
02f1175c | 3826 | unsigned long flags; |
1da177e4 | 3827 | |
02f1175c | 3828 | card = info->card; |
875b206b JS |
3829 | channel = info->line - card->first_line; |
3830 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
3831 | chip = channel >> 2; |
3832 | channel &= 0x03; | |
875b206b JS |
3833 | index = card->bus_index; |
3834 | base_addr = card->base_addr + (cy_chip_offset[chip] << index); | |
1da177e4 | 3835 | |
9fa1b3b1 | 3836 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c | 3837 | cy_writeb(base_addr + (CyRTPR << index), value & 0xff); |
9fa1b3b1 | 3838 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
3839 | } |
3840 | return 0; | |
3841 | } /* set_timeout */ | |
1da177e4 | 3842 | |
02f1175c | 3843 | static int get_timeout(struct cyclades_port *info, unsigned long __user * value) |
1da177e4 | 3844 | { |
875b206b | 3845 | struct cyclades_card *card; |
02f1175c | 3846 | void __iomem *base_addr; |
875b206b | 3847 | int channel, chip, index; |
02f1175c | 3848 | unsigned long tmp; |
1da177e4 | 3849 | |
02f1175c | 3850 | card = info->card; |
875b206b JS |
3851 | channel = info->line - card->first_line; |
3852 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
3853 | chip = channel >> 2; |
3854 | channel &= 0x03; | |
875b206b JS |
3855 | index = card->bus_index; |
3856 | base_addr = card->base_addr + (cy_chip_offset[chip] << index); | |
02f1175c | 3857 | |
db05c3b1 | 3858 | tmp = readb(base_addr + (CyRTPR << index)); |
02f1175c | 3859 | return put_user(tmp, value); |
02f1175c | 3860 | } |
f7429034 | 3861 | return 0; |
02f1175c | 3862 | } /* get_timeout */ |
1da177e4 | 3863 | |
02f1175c | 3864 | static int set_default_timeout(struct cyclades_port *info, unsigned long value) |
1da177e4 | 3865 | { |
02f1175c JS |
3866 | info->default_timeout = value & 0xff; |
3867 | return 0; | |
3868 | } /* set_default_timeout */ | |
1da177e4 LT |
3869 | |
3870 | static int | |
02f1175c | 3871 | get_default_timeout(struct cyclades_port *info, unsigned long __user * value) |
1da177e4 | 3872 | { |
02f1175c JS |
3873 | return put_user(info->default_timeout, value); |
3874 | } /* get_default_timeout */ | |
1da177e4 LT |
3875 | |
3876 | /* | |
3877 | * This routine allows the tty driver to implement device- | |
3878 | * specific ioctl's. If the ioctl number passed in cmd is | |
3879 | * not recognized by the driver, it should return ENOIOCTLCMD. | |
3880 | */ | |
3881 | static int | |
02f1175c JS |
3882 | cy_ioctl(struct tty_struct *tty, struct file *file, |
3883 | unsigned int cmd, unsigned long arg) | |
1da177e4 | 3884 | { |
cab9bdd1 | 3885 | struct cyclades_port *info = tty->driver_data; |
02f1175c JS |
3886 | struct cyclades_icount cprev, cnow; /* kernel counter temps */ |
3887 | struct serial_icounter_struct __user *p_cuser; /* user space */ | |
3888 | int ret_val = 0; | |
3889 | unsigned long flags; | |
3890 | void __user *argp = (void __user *)arg; | |
3891 | ||
3892 | if (serial_paranoia_check(info, tty->name, "cy_ioctl")) | |
3893 | return -ENODEV; | |
1da177e4 LT |
3894 | |
3895 | #ifdef CY_DEBUG_OTHER | |
21719191 JS |
3896 | printk(KERN_DEBUG "cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n", |
3897 | info->line, cmd, arg); | |
1da177e4 LT |
3898 | #endif |
3899 | ||
02f1175c JS |
3900 | switch (cmd) { |
3901 | case CYGETMON: | |
3902 | ret_val = get_mon_info(info, argp); | |
3903 | break; | |
3904 | case CYGETTHRESH: | |
3905 | ret_val = get_threshold(info, argp); | |
3906 | break; | |
3907 | case CYSETTHRESH: | |
3908 | ret_val = set_threshold(info, arg); | |
3909 | break; | |
3910 | case CYGETDEFTHRESH: | |
3911 | ret_val = get_default_threshold(info, argp); | |
3912 | break; | |
3913 | case CYSETDEFTHRESH: | |
3914 | ret_val = set_default_threshold(info, arg); | |
3915 | break; | |
3916 | case CYGETTIMEOUT: | |
3917 | ret_val = get_timeout(info, argp); | |
3918 | break; | |
3919 | case CYSETTIMEOUT: | |
3920 | ret_val = set_timeout(info, arg); | |
3921 | break; | |
3922 | case CYGETDEFTIMEOUT: | |
3923 | ret_val = get_default_timeout(info, argp); | |
3924 | break; | |
3925 | case CYSETDEFTIMEOUT: | |
3926 | ret_val = set_default_timeout(info, arg); | |
3927 | break; | |
1da177e4 | 3928 | case CYSETRFLOW: |
02f1175c JS |
3929 | info->rflow = (int)arg; |
3930 | ret_val = 0; | |
3931 | break; | |
1da177e4 | 3932 | case CYGETRFLOW: |
02f1175c JS |
3933 | ret_val = info->rflow; |
3934 | break; | |
1da177e4 | 3935 | case CYSETRTSDTR_INV: |
02f1175c JS |
3936 | info->rtsdtr_inv = (int)arg; |
3937 | ret_val = 0; | |
3938 | break; | |
1da177e4 | 3939 | case CYGETRTSDTR_INV: |
02f1175c JS |
3940 | ret_val = info->rtsdtr_inv; |
3941 | break; | |
1da177e4 | 3942 | case CYGETCD1400VER: |
02f1175c JS |
3943 | ret_val = info->chip_rev; |
3944 | break; | |
1da177e4 LT |
3945 | #ifndef CONFIG_CYZ_INTR |
3946 | case CYZSETPOLLCYCLE: | |
02f1175c JS |
3947 | cyz_polling_cycle = (arg * HZ) / 1000; |
3948 | ret_val = 0; | |
3949 | break; | |
1da177e4 | 3950 | case CYZGETPOLLCYCLE: |
02f1175c JS |
3951 | ret_val = (cyz_polling_cycle * 1000) / HZ; |
3952 | break; | |
3953 | #endif /* CONFIG_CYZ_INTR */ | |
1da177e4 | 3954 | case CYSETWAIT: |
02f1175c JS |
3955 | info->closing_wait = (unsigned short)arg *HZ / 100; |
3956 | ret_val = 0; | |
3957 | break; | |
1da177e4 | 3958 | case CYGETWAIT: |
02f1175c JS |
3959 | ret_val = info->closing_wait / (HZ / 100); |
3960 | break; | |
3961 | case TIOCGSERIAL: | |
3962 | ret_val = get_serial_info(info, argp); | |
3963 | break; | |
3964 | case TIOCSSERIAL: | |
3965 | ret_val = set_serial_info(info, argp); | |
3966 | break; | |
3967 | case TIOCSERGETLSR: /* Get line status register */ | |
3968 | ret_val = get_lsr_info(info, argp); | |
3969 | break; | |
3970 | /* | |
3971 | * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change | |
3972 | * - mask passed in arg for lines of interest | |
3973 | * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) | |
3974 | * Caller should use TIOCGICOUNT to see which one it was | |
3975 | */ | |
1da177e4 | 3976 | case TIOCMIWAIT: |
9fa1b3b1 | 3977 | spin_lock_irqsave(&info->card->card_lock, flags); |
02f1175c | 3978 | /* note the counters on entry */ |
2c7fea99 | 3979 | cnow = info->icount; |
9fa1b3b1 | 3980 | spin_unlock_irqrestore(&info->card->card_lock, flags); |
2c7fea99 JS |
3981 | ret_val = wait_event_interruptible(info->delta_msr_wait, ({ |
3982 | cprev = cnow; | |
9fa1b3b1 | 3983 | spin_lock_irqsave(&info->card->card_lock, flags); |
02f1175c | 3984 | cnow = info->icount; /* atomic copy */ |
9fa1b3b1 | 3985 | spin_unlock_irqrestore(&info->card->card_lock, flags); |
02f1175c | 3986 | |
2c7fea99 JS |
3987 | ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || |
3988 | ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || | |
3989 | ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || | |
3990 | ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)); | |
3991 | })); | |
3992 | break; | |
1da177e4 | 3993 | |
02f1175c JS |
3994 | /* |
3995 | * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) | |
3996 | * Return: write counters to the user passed counter struct | |
3997 | * NB: both 1->0 and 0->1 transitions are counted except for | |
3998 | * RI where only 0->1 is counted. | |
3999 | */ | |
1da177e4 | 4000 | case TIOCGICOUNT: |
9fa1b3b1 | 4001 | spin_lock_irqsave(&info->card->card_lock, flags); |
02f1175c | 4002 | cnow = info->icount; |
9fa1b3b1 | 4003 | spin_unlock_irqrestore(&info->card->card_lock, flags); |
02f1175c JS |
4004 | p_cuser = argp; |
4005 | ret_val = put_user(cnow.cts, &p_cuser->cts); | |
4006 | if (ret_val) | |
4007 | return ret_val; | |
4008 | ret_val = put_user(cnow.dsr, &p_cuser->dsr); | |
4009 | if (ret_val) | |
4010 | return ret_val; | |
4011 | ret_val = put_user(cnow.rng, &p_cuser->rng); | |
4012 | if (ret_val) | |
4013 | return ret_val; | |
4014 | ret_val = put_user(cnow.dcd, &p_cuser->dcd); | |
4015 | if (ret_val) | |
4016 | return ret_val; | |
4017 | ret_val = put_user(cnow.rx, &p_cuser->rx); | |
4018 | if (ret_val) | |
4019 | return ret_val; | |
4020 | ret_val = put_user(cnow.tx, &p_cuser->tx); | |
4021 | if (ret_val) | |
4022 | return ret_val; | |
4023 | ret_val = put_user(cnow.frame, &p_cuser->frame); | |
4024 | if (ret_val) | |
4025 | return ret_val; | |
4026 | ret_val = put_user(cnow.overrun, &p_cuser->overrun); | |
4027 | if (ret_val) | |
4028 | return ret_val; | |
4029 | ret_val = put_user(cnow.parity, &p_cuser->parity); | |
4030 | if (ret_val) | |
4031 | return ret_val; | |
4032 | ret_val = put_user(cnow.brk, &p_cuser->brk); | |
4033 | if (ret_val) | |
4034 | return ret_val; | |
4035 | ret_val = put_user(cnow.buf_overrun, &p_cuser->buf_overrun); | |
4036 | if (ret_val) | |
4037 | return ret_val; | |
4038 | ret_val = 0; | |
4039 | break; | |
4040 | default: | |
4041 | ret_val = -ENOIOCTLCMD; | |
4042 | } | |
1da177e4 LT |
4043 | |
4044 | #ifdef CY_DEBUG_OTHER | |
21719191 | 4045 | printk(KERN_DEBUG "cyc:cy_ioctl done\n"); |
1da177e4 LT |
4046 | #endif |
4047 | ||
02f1175c JS |
4048 | return ret_val; |
4049 | } /* cy_ioctl */ | |
1da177e4 LT |
4050 | |
4051 | /* | |
4052 | * This routine allows the tty driver to be notified when | |
4053 | * device's termios settings have changed. Note that a | |
4054 | * well-designed tty driver should be prepared to accept the case | |
4055 | * where old == NULL, and try to do something rational. | |
4056 | */ | |
02f1175c | 4057 | static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios) |
1da177e4 | 4058 | { |
cab9bdd1 | 4059 | struct cyclades_port *info = tty->driver_data; |
1da177e4 LT |
4060 | |
4061 | #ifdef CY_DEBUG_OTHER | |
21719191 | 4062 | printk(KERN_DEBUG "cyc:cy_set_termios ttyC%d\n", info->line); |
1da177e4 LT |
4063 | #endif |
4064 | ||
02f1175c JS |
4065 | set_line_char(info); |
4066 | ||
4067 | if ((old_termios->c_cflag & CRTSCTS) && | |
4068 | !(tty->termios->c_cflag & CRTSCTS)) { | |
4069 | tty->hw_stopped = 0; | |
4070 | cy_start(tty); | |
4071 | } | |
1da177e4 | 4072 | #if 0 |
02f1175c JS |
4073 | /* |
4074 | * No need to wake up processes in open wait, since they | |
4075 | * sample the CLOCAL flag once, and don't recheck it. | |
4076 | * XXX It's not clear whether the current behavior is correct | |
4077 | * or not. Hence, this may change..... | |
4078 | */ | |
4079 | if (!(old_termios->c_cflag & CLOCAL) && | |
4080 | (tty->termios->c_cflag & CLOCAL)) | |
4081 | wake_up_interruptible(&info->open_wait); | |
1da177e4 | 4082 | #endif |
02f1175c | 4083 | } /* cy_set_termios */ |
1da177e4 LT |
4084 | |
4085 | /* This function is used to send a high-priority XON/XOFF character to | |
4086 | the device. | |
4087 | */ | |
02f1175c | 4088 | static void cy_send_xchar(struct tty_struct *tty, char ch) |
1da177e4 | 4089 | { |
cab9bdd1 | 4090 | struct cyclades_port *info = tty->driver_data; |
875b206b JS |
4091 | struct cyclades_card *card; |
4092 | int channel; | |
1da177e4 | 4093 | |
02f1175c | 4094 | if (serial_paranoia_check(info, tty->name, "cy_send_xchar")) |
1da177e4 LT |
4095 | return; |
4096 | ||
02f1175c | 4097 | info->x_char = ch; |
1da177e4 LT |
4098 | |
4099 | if (ch) | |
02f1175c | 4100 | cy_start(tty); |
1da177e4 LT |
4101 | |
4102 | card = info->card; | |
875b206b | 4103 | channel = info->line - card->first_line; |
1da177e4 | 4104 | |
875b206b | 4105 | if (IS_CYC_Z(*card)) { |
02f1175c | 4106 | if (ch == STOP_CHAR(tty)) |
875b206b | 4107 | cyz_issue_cmd(card, channel, C_CM_SENDXOFF, 0L); |
02f1175c | 4108 | else if (ch == START_CHAR(tty)) |
875b206b | 4109 | cyz_issue_cmd(card, channel, C_CM_SENDXON, 0L); |
1da177e4 LT |
4110 | } |
4111 | } | |
4112 | ||
4113 | /* This routine is called by the upper-layer tty layer to signal | |
4114 | that incoming characters should be throttled because the input | |
4115 | buffers are close to full. | |
4116 | */ | |
02f1175c | 4117 | static void cy_throttle(struct tty_struct *tty) |
1da177e4 | 4118 | { |
cab9bdd1 | 4119 | struct cyclades_port *info = tty->driver_data; |
875b206b | 4120 | struct cyclades_card *card; |
02f1175c JS |
4121 | unsigned long flags; |
4122 | void __iomem *base_addr; | |
875b206b | 4123 | int chip, channel, index; |
1da177e4 LT |
4124 | |
4125 | #ifdef CY_DEBUG_THROTTLE | |
02f1175c | 4126 | char buf[64]; |
1da177e4 | 4127 | |
21719191 | 4128 | printk(KERN_DEBUG "cyc:throttle %s: %ld...ttyC%d\n", tty_name(tty, buf), |
02f1175c | 4129 | tty->ldisc.chars_in_buffer(tty), info->line); |
1da177e4 LT |
4130 | #endif |
4131 | ||
02f1175c JS |
4132 | if (serial_paranoia_check(info, tty->name, "cy_throttle")) { |
4133 | return; | |
4134 | } | |
4135 | ||
4136 | card = info->card; | |
4137 | ||
4138 | if (I_IXOFF(tty)) { | |
875b206b | 4139 | if (!IS_CYC_Z(*card)) |
02f1175c JS |
4140 | cy_send_xchar(tty, STOP_CHAR(tty)); |
4141 | else | |
4142 | info->throttle = 1; | |
4143 | } | |
1da177e4 | 4144 | |
02f1175c | 4145 | if (tty->termios->c_cflag & CRTSCTS) { |
875b206b JS |
4146 | channel = info->line - card->first_line; |
4147 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
4148 | chip = channel >> 2; |
4149 | channel &= 0x03; | |
875b206b JS |
4150 | index = card->bus_index; |
4151 | base_addr = card->base_addr + | |
02f1175c JS |
4152 | (cy_chip_offset[chip] << index); |
4153 | ||
9fa1b3b1 | 4154 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
4155 | cy_writeb(base_addr + (CyCAR << index), |
4156 | (u_char) channel); | |
4157 | if (info->rtsdtr_inv) { | |
4158 | cy_writeb(base_addr + (CyMSVR2 << index), | |
4159 | ~CyDTR); | |
4160 | } else { | |
4161 | cy_writeb(base_addr + (CyMSVR1 << index), | |
4162 | ~CyRTS); | |
4163 | } | |
9fa1b3b1 | 4164 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
4165 | } else { |
4166 | info->throttle = 1; | |
4167 | } | |
4168 | } | |
02f1175c | 4169 | } /* cy_throttle */ |
1da177e4 LT |
4170 | |
4171 | /* | |
4172 | * This routine notifies the tty driver that it should signal | |
4173 | * that characters can now be sent to the tty without fear of | |
4174 | * overrunning the input buffers of the line disciplines. | |
4175 | */ | |
02f1175c | 4176 | static void cy_unthrottle(struct tty_struct *tty) |
1da177e4 | 4177 | { |
cab9bdd1 | 4178 | struct cyclades_port *info = tty->driver_data; |
875b206b | 4179 | struct cyclades_card *card; |
02f1175c JS |
4180 | unsigned long flags; |
4181 | void __iomem *base_addr; | |
875b206b | 4182 | int chip, channel, index; |
1da177e4 LT |
4183 | |
4184 | #ifdef CY_DEBUG_THROTTLE | |
02f1175c JS |
4185 | char buf[64]; |
4186 | ||
21719191 JS |
4187 | printk(KERN_DEBUG "cyc:unthrottle %s: %ld...ttyC%d\n", |
4188 | tty_name(tty, buf), tty->ldisc.chars_in_buffer(tty),info->line); | |
1da177e4 LT |
4189 | #endif |
4190 | ||
02f1175c JS |
4191 | if (serial_paranoia_check(info, tty->name, "cy_unthrottle")) { |
4192 | return; | |
4193 | } | |
1da177e4 | 4194 | |
02f1175c JS |
4195 | if (I_IXOFF(tty)) { |
4196 | if (info->x_char) | |
4197 | info->x_char = 0; | |
4198 | else | |
4199 | cy_send_xchar(tty, START_CHAR(tty)); | |
1da177e4 | 4200 | } |
1da177e4 | 4201 | |
02f1175c JS |
4202 | if (tty->termios->c_cflag & CRTSCTS) { |
4203 | card = info->card; | |
875b206b JS |
4204 | channel = info->line - card->first_line; |
4205 | if (!IS_CYC_Z(*card)) { | |
02f1175c JS |
4206 | chip = channel >> 2; |
4207 | channel &= 0x03; | |
875b206b JS |
4208 | index = card->bus_index; |
4209 | base_addr = card->base_addr + | |
02f1175c JS |
4210 | (cy_chip_offset[chip] << index); |
4211 | ||
9fa1b3b1 | 4212 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c JS |
4213 | cy_writeb(base_addr + (CyCAR << index), |
4214 | (u_char) channel); | |
4215 | if (info->rtsdtr_inv) { | |
4216 | cy_writeb(base_addr + (CyMSVR2 << index), | |
4217 | CyDTR); | |
4218 | } else { | |
4219 | cy_writeb(base_addr + (CyMSVR1 << index), | |
4220 | CyRTS); | |
4221 | } | |
9fa1b3b1 | 4222 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
4223 | } else { |
4224 | info->throttle = 0; | |
4225 | } | |
4226 | } | |
02f1175c | 4227 | } /* cy_unthrottle */ |
1da177e4 LT |
4228 | |
4229 | /* cy_start and cy_stop provide software output flow control as a | |
4230 | function of XON/XOFF, software CTS, and other such stuff. | |
4231 | */ | |
02f1175c | 4232 | static void cy_stop(struct tty_struct *tty) |
1da177e4 | 4233 | { |
02f1175c | 4234 | struct cyclades_card *cinfo; |
cab9bdd1 | 4235 | struct cyclades_port *info = tty->driver_data; |
02f1175c JS |
4236 | void __iomem *base_addr; |
4237 | int chip, channel, index; | |
4238 | unsigned long flags; | |
1da177e4 LT |
4239 | |
4240 | #ifdef CY_DEBUG_OTHER | |
21719191 | 4241 | printk(KERN_DEBUG "cyc:cy_stop ttyC%d\n", info->line); |
1da177e4 LT |
4242 | #endif |
4243 | ||
02f1175c JS |
4244 | if (serial_paranoia_check(info, tty->name, "cy_stop")) |
4245 | return; | |
1da177e4 | 4246 | |
875b206b | 4247 | cinfo = info->card; |
02f1175c JS |
4248 | channel = info->line - cinfo->first_line; |
4249 | if (!IS_CYC_Z(*cinfo)) { | |
4250 | index = cinfo->bus_index; | |
4251 | chip = channel >> 2; | |
4252 | channel &= 0x03; | |
9fa1b3b1 | 4253 | base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index); |
1da177e4 | 4254 | |
9fa1b3b1 | 4255 | spin_lock_irqsave(&cinfo->card_lock, flags); |
02f1175c JS |
4256 | cy_writeb(base_addr + (CyCAR << index), |
4257 | (u_char)(channel & 0x0003)); /* index channel */ | |
4258 | cy_writeb(base_addr + (CySRER << index), | |
db05c3b1 | 4259 | readb(base_addr + (CySRER << index)) & ~CyTxRdy); |
9fa1b3b1 | 4260 | spin_unlock_irqrestore(&cinfo->card_lock, flags); |
02f1175c | 4261 | } |
02f1175c | 4262 | } /* cy_stop */ |
1da177e4 | 4263 | |
02f1175c | 4264 | static void cy_start(struct tty_struct *tty) |
1da177e4 | 4265 | { |
02f1175c | 4266 | struct cyclades_card *cinfo; |
cab9bdd1 | 4267 | struct cyclades_port *info = tty->driver_data; |
02f1175c JS |
4268 | void __iomem *base_addr; |
4269 | int chip, channel, index; | |
4270 | unsigned long flags; | |
1da177e4 LT |
4271 | |
4272 | #ifdef CY_DEBUG_OTHER | |
21719191 | 4273 | printk(KERN_DEBUG "cyc:cy_start ttyC%d\n", info->line); |
1da177e4 LT |
4274 | #endif |
4275 | ||
02f1175c JS |
4276 | if (serial_paranoia_check(info, tty->name, "cy_start")) |
4277 | return; | |
1da177e4 | 4278 | |
875b206b | 4279 | cinfo = info->card; |
02f1175c JS |
4280 | channel = info->line - cinfo->first_line; |
4281 | index = cinfo->bus_index; | |
4282 | if (!IS_CYC_Z(*cinfo)) { | |
4283 | chip = channel >> 2; | |
4284 | channel &= 0x03; | |
9fa1b3b1 | 4285 | base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index); |
1da177e4 | 4286 | |
9fa1b3b1 | 4287 | spin_lock_irqsave(&cinfo->card_lock, flags); |
02f1175c JS |
4288 | cy_writeb(base_addr + (CyCAR << index), (u_char) (channel & 0x0003)); /* index channel */ |
4289 | cy_writeb(base_addr + (CySRER << index), | |
db05c3b1 | 4290 | readb(base_addr + (CySRER << index)) | CyTxRdy); |
9fa1b3b1 | 4291 | spin_unlock_irqrestore(&cinfo->card_lock, flags); |
02f1175c | 4292 | } |
02f1175c | 4293 | } /* cy_start */ |
1da177e4 | 4294 | |
02f1175c | 4295 | static void cy_flush_buffer(struct tty_struct *tty) |
1da177e4 | 4296 | { |
cab9bdd1 | 4297 | struct cyclades_port *info = tty->driver_data; |
875b206b JS |
4298 | struct cyclades_card *card; |
4299 | int channel, retval; | |
02f1175c JS |
4300 | unsigned long flags; |
4301 | ||
1da177e4 | 4302 | #ifdef CY_DEBUG_IO |
21719191 | 4303 | printk(KERN_DEBUG "cyc:cy_flush_buffer ttyC%d\n", info->line); |
1da177e4 LT |
4304 | #endif |
4305 | ||
02f1175c JS |
4306 | if (serial_paranoia_check(info, tty->name, "cy_flush_buffer")) |
4307 | return; | |
1da177e4 | 4308 | |
02f1175c | 4309 | card = info->card; |
875b206b | 4310 | channel = info->line - card->first_line; |
1da177e4 | 4311 | |
9fa1b3b1 | 4312 | spin_lock_irqsave(&card->card_lock, flags); |
02f1175c | 4313 | info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; |
9fa1b3b1 | 4314 | spin_unlock_irqrestore(&card->card_lock, flags); |
1da177e4 | 4315 | |
875b206b | 4316 | if (IS_CYC_Z(*card)) { /* If it is a Z card, flush the on-board |
02f1175c | 4317 | buffers as well */ |
9fa1b3b1 | 4318 | spin_lock_irqsave(&card->card_lock, flags); |
875b206b | 4319 | retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_TX, 0L); |
02f1175c | 4320 | if (retval != 0) { |
21719191 JS |
4321 | printk(KERN_ERR "cyc: flush_buffer retval on ttyC%d " |
4322 | "was %x\n", info->line, retval); | |
02f1175c | 4323 | } |
9fa1b3b1 | 4324 | spin_unlock_irqrestore(&card->card_lock, flags); |
02f1175c JS |
4325 | } |
4326 | tty_wakeup(tty); | |
02f1175c | 4327 | } /* cy_flush_buffer */ |
1da177e4 LT |
4328 | |
4329 | /* | |
4330 | * cy_hangup() --- called by tty_hangup() when a hangup is signaled. | |
4331 | */ | |
02f1175c | 4332 | static void cy_hangup(struct tty_struct *tty) |
1da177e4 | 4333 | { |
cab9bdd1 | 4334 | struct cyclades_port *info = tty->driver_data; |
02f1175c | 4335 | |
1da177e4 | 4336 | #ifdef CY_DEBUG_OTHER |
21719191 | 4337 | printk(KERN_DEBUG "cyc:cy_hangup ttyC%d\n", info->line); |
1da177e4 LT |
4338 | #endif |
4339 | ||
02f1175c JS |
4340 | if (serial_paranoia_check(info, tty->name, "cy_hangup")) |
4341 | return; | |
1da177e4 | 4342 | |
02f1175c JS |
4343 | cy_flush_buffer(tty); |
4344 | shutdown(info); | |
02f1175c | 4345 | info->count = 0; |
1da177e4 | 4346 | #ifdef CY_DEBUG_COUNT |
21719191 JS |
4347 | printk(KERN_DEBUG "cyc:cy_hangup (%d): setting count to 0\n", |
4348 | current->pid); | |
1da177e4 | 4349 | #endif |
02f1175c JS |
4350 | info->tty = NULL; |
4351 | info->flags &= ~ASYNC_NORMAL_ACTIVE; | |
4352 | wake_up_interruptible(&info->open_wait); | |
4353 | } /* cy_hangup */ | |
1da177e4 LT |
4354 | |
4355 | /* | |
4356 | * --------------------------------------------------------------------- | |
4357 | * cy_init() and friends | |
4358 | * | |
4359 | * cy_init() is called at boot-time to initialize the serial driver. | |
4360 | * --------------------------------------------------------------------- | |
4361 | */ | |
4362 | ||
dd025c0c | 4363 | static int __devinit cy_init_card(struct cyclades_card *cinfo) |
0809e267 JS |
4364 | { |
4365 | struct cyclades_port *info; | |
a6343afb | 4366 | u32 uninitialized_var(mailbox); |
0809e267 JS |
4367 | unsigned int nports; |
4368 | unsigned short chip_number; | |
a6343afb | 4369 | int uninitialized_var(index), port; |
0809e267 | 4370 | |
3046d50e JS |
4371 | spin_lock_init(&cinfo->card_lock); |
4372 | ||
c2ad4c75 | 4373 | if (IS_CYC_Z(*cinfo)) { /* Cyclades-Z */ |
0809e267 JS |
4374 | mailbox = readl(&((struct RUNTIME_9060 __iomem *) |
4375 | cinfo->ctl_addr)->mail_box_0); | |
4376 | nports = (mailbox == ZE_V1) ? ZE_V1_NPORTS : 8; | |
4377 | cinfo->intr_enabled = 0; | |
4378 | cinfo->nports = 0; /* Will be correctly set later, after | |
4379 | Z FW is loaded */ | |
3046d50e JS |
4380 | } else { |
4381 | index = cinfo->bus_index; | |
4382 | nports = cinfo->nports = CyPORTS_PER_CHIP * cinfo->num_chips; | |
4383 | } | |
4384 | ||
dd025c0c JS |
4385 | cinfo->ports = kzalloc(sizeof(*cinfo->ports) * nports, GFP_KERNEL); |
4386 | if (cinfo->ports == NULL) { | |
4387 | printk(KERN_ERR "Cyclades: cannot allocate ports\n"); | |
3137553d | 4388 | cinfo->nports = 0; |
dd025c0c JS |
4389 | return -ENOMEM; |
4390 | } | |
4391 | ||
3046d50e JS |
4392 | for (port = cinfo->first_line; port < cinfo->first_line + nports; |
4393 | port++) { | |
dd025c0c | 4394 | info = &cinfo->ports[port - cinfo->first_line]; |
3046d50e | 4395 | info->magic = CYCLADES_MAGIC; |
875b206b | 4396 | info->card = cinfo; |
3046d50e JS |
4397 | info->line = port; |
4398 | info->flags = STD_COM_FLAGS; | |
4399 | info->closing_wait = CLOSING_WAIT_DELAY; | |
4400 | info->close_delay = 5 * HZ / 10; | |
4401 | ||
3046d50e JS |
4402 | init_waitqueue_head(&info->open_wait); |
4403 | init_waitqueue_head(&info->close_wait); | |
2c7fea99 | 4404 | init_completion(&info->shutdown_wait); |
3046d50e JS |
4405 | init_waitqueue_head(&info->delta_msr_wait); |
4406 | ||
4407 | if (IS_CYC_Z(*cinfo)) { | |
0809e267 | 4408 | info->type = PORT_STARTECH; |
0809e267 JS |
4409 | if (mailbox == ZO_V1) |
4410 | info->xmit_fifo_size = CYZ_FIFO_SIZE; | |
4411 | else | |
3046d50e | 4412 | info->xmit_fifo_size = 4 * CYZ_FIFO_SIZE; |
0809e267 | 4413 | #ifdef CONFIG_CYZ_INTR |
3991428d JS |
4414 | setup_timer(&cyz_rx_full_timer[port], |
4415 | cyz_rx_restart, (unsigned long)info); | |
0809e267 | 4416 | #endif |
3046d50e | 4417 | } else { |
0809e267 | 4418 | info->type = PORT_CIRRUS; |
0809e267 | 4419 | info->xmit_fifo_size = CyMAX_CHAR_FIFO; |
3046d50e | 4420 | info->cor1 = CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS; |
0809e267 JS |
4421 | info->cor2 = CyETC; |
4422 | info->cor3 = 0x08; /* _very_ small rcv threshold */ | |
3046d50e | 4423 | |
0809e267 | 4424 | chip_number = (port - cinfo->first_line) / 4; |
3046d50e | 4425 | if ((info->chip_rev = readb(cinfo->base_addr + |
0809e267 JS |
4426 | (cy_chip_offset[chip_number] << |
4427 | index) + (CyGFRCR << index))) >= | |
4428 | CD1400_REV_J) { | |
4429 | /* It is a CD1400 rev. J or later */ | |
4430 | info->tbpr = baud_bpr_60[13]; /* Tx BPR */ | |
4431 | info->tco = baud_co_60[13]; /* Tx CO */ | |
4432 | info->rbpr = baud_bpr_60[13]; /* Rx BPR */ | |
4433 | info->rco = baud_co_60[13]; /* Rx CO */ | |
0809e267 JS |
4434 | info->rtsdtr_inv = 1; |
4435 | } else { | |
4436 | info->tbpr = baud_bpr_25[13]; /* Tx BPR */ | |
4437 | info->tco = baud_co_25[13]; /* Tx CO */ | |
4438 | info->rbpr = baud_bpr_25[13]; /* Rx BPR */ | |
4439 | info->rco = baud_co_25[13]; /* Rx CO */ | |
0809e267 JS |
4440 | info->rtsdtr_inv = 0; |
4441 | } | |
3046d50e JS |
4442 | info->read_status_mask = CyTIMEOUT | CySPECHAR | |
4443 | CyBREAK | CyPARITY | CyFRAME | CyOVERRUN; | |
0809e267 | 4444 | } |
3046d50e | 4445 | |
0809e267 | 4446 | } |
3046d50e JS |
4447 | |
4448 | #ifndef CONFIG_CYZ_INTR | |
4449 | if (IS_CYC_Z(*cinfo) && !timer_pending(&cyz_timerlist)) { | |
4450 | mod_timer(&cyz_timerlist, jiffies + 1); | |
4451 | #ifdef CY_PCI_DEBUG | |
4452 | printk(KERN_DEBUG "Cyclades-Z polling initialized\n"); | |
4453 | #endif | |
4454 | } | |
4455 | #endif | |
dd025c0c | 4456 | return 0; |
0809e267 JS |
4457 | } |
4458 | ||
1da177e4 LT |
4459 | /* initialize chips on Cyclom-Y card -- return number of valid |
4460 | chips (which is number of ports/4) */ | |
31b4f0a1 JS |
4461 | static unsigned short __devinit cyy_init_card(void __iomem *true_base_addr, |
4462 | int index) | |
1da177e4 | 4463 | { |
02f1175c JS |
4464 | unsigned int chip_number; |
4465 | void __iomem *base_addr; | |
4466 | ||
4467 | cy_writeb(true_base_addr + (Cy_HwReset << index), 0); | |
4468 | /* Cy_HwReset is 0x1400 */ | |
4469 | cy_writeb(true_base_addr + (Cy_ClrIntr << index), 0); | |
4470 | /* Cy_ClrIntr is 0x1800 */ | |
4471 | udelay(500L); | |
4472 | ||
4473 | for (chip_number = 0; chip_number < CyMAX_CHIPS_PER_CARD; chip_number++) { | |
4474 | base_addr = | |
4475 | true_base_addr + (cy_chip_offset[chip_number] << index); | |
4476 | mdelay(1); | |
db05c3b1 | 4477 | if (readb(base_addr + (CyCCR << index)) != 0x00) { |
02f1175c JS |
4478 | /************* |
4479 | printk(" chip #%d at %#6lx is never idle (CCR != 0)\n", | |
4480 | chip_number, (unsigned long)base_addr); | |
4481 | *************/ | |
4482 | return chip_number; | |
4483 | } | |
4484 | ||
4485 | cy_writeb(base_addr + (CyGFRCR << index), 0); | |
4486 | udelay(10L); | |
4487 | ||
4488 | /* The Cyclom-16Y does not decode address bit 9 and therefore | |
4489 | cannot distinguish between references to chip 0 and a non- | |
4490 | existent chip 4. If the preceding clearing of the supposed | |
4491 | chip 4 GFRCR register appears at chip 0, there is no chip 4 | |
4492 | and this must be a Cyclom-16Y, not a Cyclom-32Ye. | |
4493 | */ | |
db05c3b1 | 4494 | if (chip_number == 4 && readb(true_base_addr + |
02f1175c JS |
4495 | (cy_chip_offset[0] << index) + |
4496 | (CyGFRCR << index)) == 0) { | |
4497 | return chip_number; | |
4498 | } | |
4499 | ||
4500 | cy_writeb(base_addr + (CyCCR << index), CyCHIP_RESET); | |
4501 | mdelay(1); | |
4502 | ||
db05c3b1 | 4503 | if (readb(base_addr + (CyGFRCR << index)) == 0x00) { |
02f1175c JS |
4504 | /* |
4505 | printk(" chip #%d at %#6lx is not responding ", | |
4506 | chip_number, (unsigned long)base_addr); | |
4507 | printk("(GFRCR stayed 0)\n", | |
4508 | */ | |
4509 | return chip_number; | |
4510 | } | |
db05c3b1 | 4511 | if ((0xf0 & (readb(base_addr + (CyGFRCR << index)))) != |
02f1175c JS |
4512 | 0x40) { |
4513 | /* | |
4514 | printk(" chip #%d at %#6lx is not valid (GFRCR == " | |
4515 | "%#2x)\n", | |
4516 | chip_number, (unsigned long)base_addr, | |
4517 | base_addr[CyGFRCR<<index]); | |
4518 | */ | |
4519 | return chip_number; | |
4520 | } | |
4521 | cy_writeb(base_addr + (CyGCR << index), CyCH0_SERIAL); | |
db05c3b1 | 4522 | if (readb(base_addr + (CyGFRCR << index)) >= CD1400_REV_J) { |
02f1175c JS |
4523 | /* It is a CD1400 rev. J or later */ |
4524 | /* Impossible to reach 5ms with this chip. | |
4525 | Changed to 2ms instead (f = 500 Hz). */ | |
4526 | cy_writeb(base_addr + (CyPPR << index), CyCLOCK_60_2MS); | |
4527 | } else { | |
4528 | /* f = 200 Hz */ | |
4529 | cy_writeb(base_addr + (CyPPR << index), CyCLOCK_25_5MS); | |
4530 | } | |
1da177e4 | 4531 | |
02f1175c JS |
4532 | /* |
4533 | printk(" chip #%d at %#6lx is rev 0x%2x\n", | |
4534 | chip_number, (unsigned long)base_addr, | |
db05c3b1 | 4535 | readb(base_addr+(CyGFRCR<<index))); |
02f1175c JS |
4536 | */ |
4537 | } | |
4538 | return chip_number; | |
4539 | } /* cyy_init_card */ | |
1da177e4 LT |
4540 | |
4541 | /* | |
4542 | * --------------------------------------------------------------------- | |
4543 | * cy_detect_isa() - Probe for Cyclom-Y/ISA boards. | |
4544 | * sets global variables and return the number of ISA boards found. | |
4545 | * --------------------------------------------------------------------- | |
4546 | */ | |
02f1175c | 4547 | static int __init cy_detect_isa(void) |
1da177e4 LT |
4548 | { |
4549 | #ifdef CONFIG_ISA | |
02f1175c JS |
4550 | unsigned short cy_isa_irq, nboard; |
4551 | void __iomem *cy_isa_address; | |
4552 | unsigned short i, j, cy_isa_nchan; | |
1da177e4 | 4553 | #ifdef MODULE |
02f1175c | 4554 | int isparam = 0; |
1da177e4 LT |
4555 | #endif |
4556 | ||
02f1175c | 4557 | nboard = 0; |
1da177e4 LT |
4558 | |
4559 | #ifdef MODULE | |
4560 | /* Check for module parameters */ | |
02f1175c JS |
4561 | for (i = 0; i < NR_CARDS; i++) { |
4562 | if (maddr[i] || i) { | |
4563 | isparam = 1; | |
4564 | cy_isa_addresses[i] = maddr[i]; | |
4565 | } | |
4566 | if (!maddr[i]) | |
4567 | break; | |
1da177e4 LT |
4568 | } |
4569 | #endif | |
4570 | ||
02f1175c JS |
4571 | /* scan the address table probing for Cyclom-Y/ISA boards */ |
4572 | for (i = 0; i < NR_ISA_ADDRS; i++) { | |
4573 | unsigned int isa_address = cy_isa_addresses[i]; | |
4574 | if (isa_address == 0x0000) { | |
096dcfce | 4575 | return nboard; |
02f1175c | 4576 | } |
1da177e4 | 4577 | |
02f1175c | 4578 | /* probe for CD1400... */ |
1da177e4 | 4579 | cy_isa_address = ioremap(isa_address, CyISA_Ywin); |
3137553d JS |
4580 | if (cy_isa_address == NULL) { |
4581 | printk(KERN_ERR "Cyclom-Y/ISA: can't remap base " | |
4582 | "address\n"); | |
4583 | continue; | |
4584 | } | |
02f1175c JS |
4585 | cy_isa_nchan = CyPORTS_PER_CHIP * |
4586 | cyy_init_card(cy_isa_address, 0); | |
4587 | if (cy_isa_nchan == 0) { | |
3137553d | 4588 | iounmap(cy_isa_address); |
02f1175c JS |
4589 | continue; |
4590 | } | |
1da177e4 LT |
4591 | #ifdef MODULE |
4592 | if (isparam && irq[i]) | |
02f1175c | 4593 | cy_isa_irq = irq[i]; |
1da177e4 LT |
4594 | else |
4595 | #endif | |
02f1175c JS |
4596 | /* find out the board's irq by probing */ |
4597 | cy_isa_irq = detect_isa_irq(cy_isa_address); | |
4598 | if (cy_isa_irq == 0) { | |
21719191 JS |
4599 | printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but the " |
4600 | "IRQ could not be detected.\n", | |
02f1175c | 4601 | (unsigned long)cy_isa_address); |
3137553d | 4602 | iounmap(cy_isa_address); |
02f1175c JS |
4603 | continue; |
4604 | } | |
4605 | ||
4606 | if ((cy_next_channel + cy_isa_nchan) > NR_PORTS) { | |
21719191 JS |
4607 | printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no " |
4608 | "more channels are available. Change NR_PORTS " | |
4609 | "in cyclades.c and recompile kernel.\n", | |
02f1175c | 4610 | (unsigned long)cy_isa_address); |
3137553d | 4611 | iounmap(cy_isa_address); |
096dcfce | 4612 | return nboard; |
02f1175c JS |
4613 | } |
4614 | /* fill the next cy_card structure available */ | |
4615 | for (j = 0; j < NR_CARDS; j++) { | |
f7429034 | 4616 | if (cy_card[j].base_addr == NULL) |
02f1175c JS |
4617 | break; |
4618 | } | |
4619 | if (j == NR_CARDS) { /* no more cy_cards available */ | |
21719191 JS |
4620 | printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no " |
4621 | "more cards can be used. Change NR_CARDS in " | |
4622 | "cyclades.c and recompile kernel.\n", | |
02f1175c | 4623 | (unsigned long)cy_isa_address); |
3137553d | 4624 | iounmap(cy_isa_address); |
096dcfce | 4625 | return nboard; |
02f1175c JS |
4626 | } |
4627 | ||
4628 | /* allocate IRQ */ | |
4629 | if (request_irq(cy_isa_irq, cyy_interrupt, | |
4630 | IRQF_DISABLED, "Cyclom-Y", &cy_card[j])) { | |
21719191 JS |
4631 | printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but " |
4632 | "could not allocate IRQ#%d.\n", | |
4633 | (unsigned long)cy_isa_address, cy_isa_irq); | |
3137553d | 4634 | iounmap(cy_isa_address); |
096dcfce | 4635 | return nboard; |
02f1175c JS |
4636 | } |
4637 | ||
4638 | /* set cy_card */ | |
4639 | cy_card[j].base_addr = cy_isa_address; | |
4640 | cy_card[j].ctl_addr = NULL; | |
4641 | cy_card[j].irq = (int)cy_isa_irq; | |
4642 | cy_card[j].bus_index = 0; | |
4643 | cy_card[j].first_line = cy_next_channel; | |
4644 | cy_card[j].num_chips = cy_isa_nchan / 4; | |
3137553d JS |
4645 | if (cy_init_card(&cy_card[j])) { |
4646 | cy_card[j].base_addr = NULL; | |
4647 | free_irq(cy_isa_irq, &cy_card[j]); | |
4648 | iounmap(cy_isa_address); | |
4649 | continue; | |
4650 | } | |
02f1175c JS |
4651 | nboard++; |
4652 | ||
21719191 JS |
4653 | printk(KERN_INFO "Cyclom-Y/ISA #%d: 0x%lx-0x%lx, IRQ%d found: " |
4654 | "%d channels starting from port %d\n", | |
02f1175c JS |
4655 | j + 1, (unsigned long)cy_isa_address, |
4656 | (unsigned long)(cy_isa_address + (CyISA_Ywin - 1)), | |
21719191 JS |
4657 | cy_isa_irq, cy_isa_nchan, cy_next_channel); |
4658 | ||
6ad1ccc1 JS |
4659 | for (j = cy_next_channel; |
4660 | j < cy_next_channel + cy_isa_nchan; j++) | |
4661 | tty_register_device(cy_serial_driver, j, NULL); | |
02f1175c JS |
4662 | cy_next_channel += cy_isa_nchan; |
4663 | } | |
096dcfce | 4664 | return nboard; |
1da177e4 | 4665 | #else |
096dcfce | 4666 | return 0; |
02f1175c JS |
4667 | #endif /* CONFIG_ISA */ |
4668 | } /* cy_detect_isa */ | |
1da177e4 | 4669 | |
58936d8d | 4670 | #ifdef CONFIG_PCI |
054f5b0a JS |
4671 | static inline int __devinit cyc_isfwstr(const char *str, unsigned int size) |
4672 | { | |
4673 | unsigned int a; | |
4674 | ||
4675 | for (a = 0; a < size && *str; a++, str++) | |
4676 | if (*str & 0x80) | |
4677 | return -EINVAL; | |
4678 | ||
4679 | for (; a < size; a++, str++) | |
4680 | if (*str) | |
4681 | return -EINVAL; | |
4682 | ||
4683 | return 0; | |
4684 | } | |
4685 | ||
4686 | static inline void __devinit cyz_fpga_copy(void __iomem *fpga, u8 *data, | |
4687 | unsigned int size) | |
4688 | { | |
4689 | for (; size > 0; size--) { | |
4690 | cy_writel(fpga, *data++); | |
4691 | udelay(10); | |
4692 | } | |
4693 | } | |
4694 | ||
4695 | static void __devinit plx_init(struct pci_dev *pdev, int irq, | |
4696 | struct RUNTIME_9060 __iomem *addr) | |
1da177e4 | 4697 | { |
02f1175c | 4698 | /* Reset PLX */ |
054f5b0a | 4699 | cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) | 0x40000000); |
02f1175c | 4700 | udelay(100L); |
054f5b0a | 4701 | cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) & ~0x40000000); |
02f1175c JS |
4702 | |
4703 | /* Reload Config. Registers from EEPROM */ | |
054f5b0a | 4704 | cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) | 0x20000000); |
02f1175c | 4705 | udelay(100L); |
054f5b0a JS |
4706 | cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) & ~0x20000000); |
4707 | ||
4708 | /* For some yet unknown reason, once the PLX9060 reloads the EEPROM, | |
4709 | * the IRQ is lost and, thus, we have to re-write it to the PCI config. | |
4710 | * registers. This will remain here until we find a permanent fix. | |
4711 | */ | |
4712 | pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, irq); | |
4713 | } | |
4714 | ||
4715 | static int __devinit __cyz_load_fw(const struct firmware *fw, | |
4716 | const char *name, const u32 mailbox, void __iomem *base, | |
4717 | void __iomem *fpga) | |
4718 | { | |
4719 | void *ptr = fw->data; | |
4720 | struct zfile_header *h = ptr; | |
4721 | struct zfile_config *c, *cs; | |
4722 | struct zfile_block *b, *bs; | |
4723 | unsigned int a, tmp, len = fw->size; | |
4724 | #define BAD_FW KERN_ERR "Bad firmware: " | |
4725 | if (len < sizeof(*h)) { | |
4726 | printk(BAD_FW "too short: %u<%zu\n", len, sizeof(*h)); | |
4727 | return -EINVAL; | |
4728 | } | |
4729 | ||
4730 | cs = ptr + h->config_offset; | |
4731 | bs = ptr + h->block_offset; | |
4732 | ||
4733 | if ((void *)(cs + h->n_config) > ptr + len || | |
4734 | (void *)(bs + h->n_blocks) > ptr + len) { | |
4735 | printk(BAD_FW "too short"); | |
4736 | return -EINVAL; | |
4737 | } | |
4738 | ||
4739 | if (cyc_isfwstr(h->name, sizeof(h->name)) || | |
4740 | cyc_isfwstr(h->date, sizeof(h->date))) { | |
4741 | printk(BAD_FW "bad formatted header string\n"); | |
4742 | return -EINVAL; | |
4743 | } | |
4744 | ||
4745 | if (strncmp(name, h->name, sizeof(h->name))) { | |
4746 | printk(BAD_FW "bad name '%s' (expected '%s')\n", h->name, name); | |
4747 | return -EINVAL; | |
4748 | } | |
4749 | ||
4750 | tmp = 0; | |
4751 | for (c = cs; c < cs + h->n_config; c++) { | |
4752 | for (a = 0; a < c->n_blocks; a++) | |
4753 | if (c->block_list[a] > h->n_blocks) { | |
4754 | printk(BAD_FW "bad block ref number in cfgs\n"); | |
4755 | return -EINVAL; | |
4756 | } | |
4757 | if (c->mailbox == mailbox && c->function == 0) /* 0 is normal */ | |
4758 | tmp++; | |
4759 | } | |
4760 | if (!tmp) { | |
4761 | printk(BAD_FW "nothing appropriate\n"); | |
4762 | return -EINVAL; | |
4763 | } | |
4764 | ||
4765 | for (b = bs; b < bs + h->n_blocks; b++) | |
4766 | if (b->file_offset + b->size > len) { | |
4767 | printk(BAD_FW "bad block data offset\n"); | |
4768 | return -EINVAL; | |
4769 | } | |
4770 | ||
4771 | /* everything is OK, let's seek'n'load it */ | |
4772 | for (c = cs; c < cs + h->n_config; c++) | |
4773 | if (c->mailbox == mailbox && c->function == 0) | |
4774 | break; | |
4775 | ||
4776 | for (a = 0; a < c->n_blocks; a++) { | |
4777 | b = &bs[c->block_list[a]]; | |
4778 | if (b->type == ZBLOCK_FPGA) { | |
4779 | if (fpga != NULL) | |
4780 | cyz_fpga_copy(fpga, ptr + b->file_offset, | |
4781 | b->size); | |
4782 | } else { | |
4783 | if (base != NULL) | |
4784 | memcpy_toio(base + b->ram_offset, | |
4785 | ptr + b->file_offset, b->size); | |
4786 | } | |
4787 | } | |
4788 | #undef BAD_FW | |
4789 | return 0; | |
4790 | } | |
4791 | ||
4792 | static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, | |
4793 | struct RUNTIME_9060 __iomem *ctl_addr, int irq) | |
4794 | { | |
4795 | const struct firmware *fw; | |
4796 | struct FIRM_ID __iomem *fid = base_addr + ID_ADDRESS; | |
4797 | struct CUSTOM_REG __iomem *cust = base_addr; | |
4798 | struct ZFW_CTRL __iomem *pt_zfwctrl; | |
c4923b4f | 4799 | void __iomem *tmp; |
054f5b0a JS |
4800 | u32 mailbox, status; |
4801 | unsigned int i; | |
4802 | int retval; | |
4803 | ||
4804 | retval = request_firmware(&fw, "cyzfirm.bin", &pdev->dev); | |
4805 | if (retval) { | |
4806 | dev_err(&pdev->dev, "can't get firmware\n"); | |
4807 | goto err; | |
4808 | } | |
4809 | ||
4810 | /* Check whether the firmware is already loaded and running. If | |
4811 | positive, skip this board */ | |
4812 | if (Z_FPGA_LOADED(ctl_addr) && readl(&fid->signature) == ZFIRM_ID) { | |
4813 | u32 cntval = readl(base_addr + 0x190); | |
4814 | ||
4815 | udelay(100); | |
4816 | if (cntval != readl(base_addr + 0x190)) { | |
4817 | /* FW counter is working, FW is running */ | |
4818 | dev_dbg(&pdev->dev, "Cyclades-Z FW already loaded. " | |
4819 | "Skipping board.\n"); | |
4820 | retval = 0; | |
4821 | goto err_rel; | |
4822 | } | |
4823 | } | |
4824 | ||
4825 | /* start boot */ | |
4826 | cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) & | |
4827 | ~0x00030800UL); | |
4828 | ||
4829 | mailbox = readl(&ctl_addr->mail_box_0); | |
4830 | ||
4831 | if (mailbox == 0 || Z_FPGA_LOADED(ctl_addr)) { | |
4832 | /* stops CPU and set window to beginning of RAM */ | |
4833 | cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); | |
4834 | cy_writel(&cust->cpu_stop, 0); | |
4835 | cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); | |
4836 | udelay(100); | |
4837 | } | |
4838 | ||
4839 | plx_init(pdev, irq, ctl_addr); | |
4840 | ||
4841 | if (mailbox != 0) { | |
4842 | /* load FPGA */ | |
4843 | retval = __cyz_load_fw(fw, "Cyclom-Z", mailbox, NULL, | |
4844 | base_addr); | |
4845 | if (retval) | |
4846 | goto err_rel; | |
4847 | if (!Z_FPGA_LOADED(ctl_addr)) { | |
4848 | dev_err(&pdev->dev, "fw upload successful, but fw is " | |
4849 | "not loaded\n"); | |
4850 | goto err_rel; | |
4851 | } | |
4852 | } | |
4853 | ||
4854 | /* stops CPU and set window to beginning of RAM */ | |
4855 | cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); | |
4856 | cy_writel(&cust->cpu_stop, 0); | |
4857 | cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); | |
4858 | udelay(100); | |
4859 | ||
4860 | /* clear memory */ | |
c4923b4f | 4861 | for (tmp = base_addr; tmp < base_addr + RAM_SIZE; tmp++) |
054f5b0a JS |
4862 | cy_writeb(tmp, 255); |
4863 | if (mailbox != 0) { | |
4864 | /* set window to last 512K of RAM */ | |
4865 | cy_writel(&ctl_addr->loc_addr_base, WIN_RAM + RAM_SIZE); | |
4866 | //sleep(1); | |
c4923b4f | 4867 | for (tmp = base_addr; tmp < base_addr + RAM_SIZE; tmp++) |
054f5b0a JS |
4868 | cy_writeb(tmp, 255); |
4869 | /* set window to beginning of RAM */ | |
4870 | cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); | |
4871 | //sleep(1); | |
4872 | } | |
4873 | ||
4874 | retval = __cyz_load_fw(fw, "Cyclom-Z", mailbox, base_addr, NULL); | |
4875 | release_firmware(fw); | |
4876 | if (retval) | |
4877 | goto err; | |
4878 | ||
4879 | /* finish boot and start boards */ | |
4880 | cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); | |
4881 | cy_writel(&cust->cpu_start, 0); | |
4882 | cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); | |
4883 | i = 0; | |
4884 | while ((status = readl(&fid->signature)) != ZFIRM_ID && i++ < 40) | |
4885 | msleep(100); | |
4886 | if (status != ZFIRM_ID) { | |
4887 | if (status == ZFIRM_HLT) { | |
4888 | dev_err(&pdev->dev, "you need an external power supply " | |
4889 | "for this number of ports. Firmware halted and " | |
4890 | "board reset.\n"); | |
4891 | retval = -EIO; | |
4892 | goto err; | |
4893 | } | |
4894 | dev_warn(&pdev->dev, "fid->signature = 0x%x... Waiting " | |
4895 | "some more time\n", status); | |
4896 | while ((status = readl(&fid->signature)) != ZFIRM_ID && | |
4897 | i++ < 200) | |
4898 | msleep(100); | |
4899 | if (status != ZFIRM_ID) { | |
4900 | dev_err(&pdev->dev, "Board not started in 20 seconds! " | |
4901 | "Giving up. (fid->signature = 0x%x)\n", | |
4902 | status); | |
4903 | dev_info(&pdev->dev, "*** Warning ***: if you are " | |
4904 | "upgrading the FW, please power cycle the " | |
4905 | "system before loading the new FW to the " | |
4906 | "Cyclades-Z.\n"); | |
4907 | ||
4908 | if (Z_FPGA_LOADED(ctl_addr)) | |
4909 | plx_init(pdev, irq, ctl_addr); | |
4910 | ||
4911 | retval = -EIO; | |
4912 | goto err; | |
4913 | } | |
4914 | dev_dbg(&pdev->dev, "Firmware started after %d seconds.\n", | |
4915 | i / 10); | |
4916 | } | |
4917 | pt_zfwctrl = base_addr + readl(&fid->zfwctrl_addr); | |
4918 | ||
4919 | dev_dbg(&pdev->dev, "fid=> %p, zfwctrl_addr=> %x, npt_zfwctrl=> %p\n", | |
4920 | base_addr + ID_ADDRESS, readl(&fid->zfwctrl_addr), | |
4921 | base_addr + readl(&fid->zfwctrl_addr)); | |
4922 | ||
4923 | dev_info(&pdev->dev, "Cyclades-Z FW loaded: version = %x, ports = %u\n", | |
4924 | readl(&pt_zfwctrl->board_ctrl.fw_version), | |
4925 | readl(&pt_zfwctrl->board_ctrl.n_channel)); | |
4926 | ||
4927 | if (readl(&pt_zfwctrl->board_ctrl.n_channel) == 0) { | |
4928 | dev_warn(&pdev->dev, "no Cyclades-Z ports were found. Please " | |
4929 | "check the connection between the Z host card and the " | |
4930 | "serial expanders.\n"); | |
4931 | ||
4932 | if (Z_FPGA_LOADED(ctl_addr)) | |
4933 | plx_init(pdev, irq, ctl_addr); | |
4934 | ||
4935 | dev_info(&pdev->dev, "Null number of ports detected. Board " | |
4936 | "reset.\n"); | |
4937 | retval = 0; | |
4938 | goto err; | |
4939 | } | |
4940 | ||
4941 | cy_writel(&pt_zfwctrl->board_ctrl.op_system, C_OS_LINUX); | |
4942 | cy_writel(&pt_zfwctrl->board_ctrl.dr_version, DRIVER_VERSION); | |
4943 | ||
4944 | /* | |
4945 | Early firmware failed to start looking for commands. | |
4946 | This enables firmware interrupts for those commands. | |
4947 | */ | |
4948 | cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) | | |
4949 | (1 << 17)); | |
4950 | cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) | | |
4951 | 0x00030800UL); | |
4952 | ||
4953 | plx_init(pdev, irq, ctl_addr); | |
4954 | ||
4955 | return 0; | |
4956 | err_rel: | |
4957 | release_firmware(fw); | |
4958 | err: | |
4959 | return retval; | |
1da177e4 LT |
4960 | } |
4961 | ||
58936d8d JS |
4962 | static int __devinit cy_pci_probe(struct pci_dev *pdev, |
4963 | const struct pci_device_id *ent) | |
1da177e4 | 4964 | { |
3137553d JS |
4965 | void __iomem *addr0 = NULL, *addr2 = NULL; |
4966 | char *card_name = NULL; | |
4967 | u32 mailbox; | |
4968 | unsigned int device_id, nchan = 0, card_no, i; | |
4969 | unsigned char plx_ver; | |
4970 | int retval, irq; | |
02f1175c | 4971 | |
58936d8d JS |
4972 | retval = pci_enable_device(pdev); |
4973 | if (retval) { | |
4974 | dev_err(&pdev->dev, "cannot enable device\n"); | |
3137553d | 4975 | goto err; |
58936d8d | 4976 | } |
1da177e4 | 4977 | |
58936d8d | 4978 | /* read PCI configuration area */ |
3137553d | 4979 | irq = pdev->irq; |
58936d8d | 4980 | device_id = pdev->device & ~PCI_DEVICE_ID_MASK; |
1da177e4 | 4981 | |
3137553d JS |
4982 | #if defined(__alpha__) |
4983 | if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo) { /* below 1M? */ | |
4984 | dev_err(&pdev->dev, "Cyclom-Y/PCI not supported for low " | |
4985 | "addresses on Alpha systems.\n"); | |
4986 | retval = -EIO; | |
4987 | goto err_dis; | |
4988 | } | |
4989 | #endif | |
4990 | if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Lo) { | |
4991 | dev_err(&pdev->dev, "Cyclades-Z/PCI not supported for low " | |
4992 | "addresses\n"); | |
4993 | retval = -EIO; | |
4994 | goto err_dis; | |
4995 | } | |
4996 | ||
4997 | if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) { | |
4998 | dev_warn(&pdev->dev, "PCI I/O bit incorrectly set. Ignoring " | |
4999 | "it...\n"); | |
5000 | pdev->resource[2].flags &= ~IORESOURCE_IO; | |
5001 | } | |
5002 | ||
5003 | retval = pci_request_regions(pdev, "cyclades"); | |
5004 | if (retval) { | |
5005 | dev_err(&pdev->dev, "failed to reserve resources\n"); | |
5006 | goto err_dis; | |
5007 | } | |
5008 | ||
5009 | retval = -EIO; | |
58936d8d JS |
5010 | if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || |
5011 | device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { | |
3137553d | 5012 | card_name = "Cyclom-Y"; |
1da177e4 | 5013 | |
3137553d JS |
5014 | addr0 = pci_iomap(pdev, 0, CyPCI_Yctl); |
5015 | if (addr0 == NULL) { | |
5016 | dev_err(&pdev->dev, "can't remap ctl region\n"); | |
5017 | goto err_reg; | |
58936d8d | 5018 | } |
3137553d JS |
5019 | addr2 = pci_iomap(pdev, 2, CyPCI_Ywin); |
5020 | if (addr2 == NULL) { | |
5021 | dev_err(&pdev->dev, "can't remap base region\n"); | |
5022 | goto err_unmap; | |
58936d8d | 5023 | } |
1da177e4 | 5024 | |
3137553d JS |
5025 | nchan = CyPORTS_PER_CHIP * cyy_init_card(addr2, 1); |
5026 | if (nchan == 0) { | |
21719191 JS |
5027 | dev_err(&pdev->dev, "Cyclom-Y PCI host card with no " |
5028 | "Serial-Modules\n"); | |
58936d8d JS |
5029 | return -EIO; |
5030 | } | |
58936d8d | 5031 | } else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi) { |
3137553d | 5032 | struct RUNTIME_9060 __iomem *ctl_addr; |
21719191 | 5033 | |
3137553d JS |
5034 | ctl_addr = addr0 = pci_iomap(pdev, 0, CyPCI_Zctl); |
5035 | if (addr0 == NULL) { | |
5036 | dev_err(&pdev->dev, "can't remap ctl region\n"); | |
5037 | goto err_reg; | |
5038 | } | |
58936d8d JS |
5039 | |
5040 | /* Disable interrupts on the PLX before resetting it */ | |
054f5b0a | 5041 | cy_writew(addr0 + 0x68, readw(addr0 + 0x68) & ~0x0900); |
58936d8d | 5042 | |
054f5b0a | 5043 | plx_init(pdev, irq, addr0); |
02f1175c | 5044 | |
3137553d | 5045 | mailbox = (u32)readl(&ctl_addr->mail_box_0); |
58936d8d | 5046 | |
3137553d JS |
5047 | addr2 = pci_iomap(pdev, 2, mailbox == ZE_V1 ? |
5048 | CyPCI_Ze_win : CyPCI_Zwin); | |
5049 | if (addr2 == NULL) { | |
5050 | dev_err(&pdev->dev, "can't remap base region\n"); | |
5051 | goto err_unmap; | |
58936d8d JS |
5052 | } |
5053 | ||
5054 | if (mailbox == ZE_V1) { | |
3137553d JS |
5055 | card_name = "Cyclades-Ze"; |
5056 | ||
5057 | readl(&ctl_addr->mail_box_0); | |
5058 | nchan = ZE_V1_NPORTS; | |
58936d8d | 5059 | } else { |
3137553d | 5060 | card_name = "Cyclades-8Zo"; |
1da177e4 LT |
5061 | |
5062 | #ifdef CY_PCI_DEBUG | |
3137553d JS |
5063 | if (mailbox == ZO_V1) { |
5064 | cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); | |
5065 | dev_info(&pdev->dev, "Cyclades-8Zo/PCI: FPGA " | |
5066 | "id %lx, ver %lx\n", (ulong)(0xff & | |
5067 | readl(&((struct CUSTOM_REG *)addr2)-> | |
5068 | fpga_id)), (ulong)(0xff & | |
5069 | readl(&((struct CUSTOM_REG *)addr2)-> | |
5070 | fpga_version))); | |
5071 | cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); | |
5072 | } else { | |
5073 | dev_info(&pdev->dev, "Cyclades-Z/PCI: New " | |
5074 | "Cyclades-Z board. FPGA not loaded\n"); | |
5075 | } | |
1da177e4 | 5076 | #endif |
3137553d JS |
5077 | /* The following clears the firmware id word. This |
5078 | ensures that the driver will not attempt to talk to | |
5079 | the board until it has been properly initialized. | |
5080 | */ | |
5081 | if ((mailbox == ZO_V1) || (mailbox == ZO_V2)) | |
5082 | cy_writel(addr2 + ID_ADDRESS, 0L); | |
1da177e4 | 5083 | |
054f5b0a JS |
5084 | retval = cyz_load_fw(pdev, addr2, addr0, irq); |
5085 | if (retval) | |
5086 | goto err_unmap; | |
3137553d JS |
5087 | /* This must be a Cyclades-8Zo/PCI. The extendable |
5088 | version will have a different device_id and will | |
5089 | be allocated its maximum number of ports. */ | |
5090 | nchan = 8; | |
58936d8d | 5091 | } |
3137553d JS |
5092 | } |
5093 | ||
5094 | if ((cy_next_channel + nchan) > NR_PORTS) { | |
5095 | dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no " | |
5096 | "channels are available. Change NR_PORTS in " | |
5097 | "cyclades.c and recompile kernel.\n"); | |
5098 | goto err_unmap; | |
5099 | } | |
5100 | /* fill the next cy_card structure available */ | |
5101 | for (card_no = 0; card_no < NR_CARDS; card_no++) { | |
5102 | if (cy_card[card_no].base_addr == NULL) | |
5103 | break; | |
5104 | } | |
5105 | if (card_no == NR_CARDS) { /* no more cy_cards available */ | |
5106 | dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no " | |
5107 | "more cards can be used. Change NR_CARDS in " | |
5108 | "cyclades.c and recompile kernel.\n"); | |
5109 | goto err_unmap; | |
5110 | } | |
5111 | ||
5112 | if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || | |
5113 | device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { | |
5114 | /* allocate IRQ */ | |
5115 | retval = request_irq(irq, cyy_interrupt, | |
5116 | IRQF_SHARED, "Cyclom-Y", &cy_card[card_no]); | |
5117 | if (retval) { | |
5118 | dev_err(&pdev->dev, "could not allocate IRQ\n"); | |
5119 | goto err_unmap; | |
58936d8d | 5120 | } |
3137553d JS |
5121 | cy_card[card_no].num_chips = nchan / 4; |
5122 | } else { | |
02f1175c | 5123 | #ifdef CONFIG_CYZ_INTR |
58936d8d | 5124 | /* allocate IRQ only if board has an IRQ */ |
3137553d JS |
5125 | if (irq != 0 && irq != 255) { |
5126 | retval = request_irq(irq, cyz_interrupt, | |
58936d8d | 5127 | IRQF_SHARED, "Cyclades-Z", |
3137553d | 5128 | &cy_card[card_no]); |
58936d8d | 5129 | if (retval) { |
21719191 | 5130 | dev_err(&pdev->dev, "could not allocate IRQ\n"); |
3137553d | 5131 | goto err_unmap; |
02f1175c | 5132 | } |
58936d8d | 5133 | } |
02f1175c | 5134 | #endif /* CONFIG_CYZ_INTR */ |
3137553d JS |
5135 | cy_card[card_no].num_chips = -1; |
5136 | } | |
02f1175c | 5137 | |
3137553d JS |
5138 | /* set cy_card */ |
5139 | cy_card[card_no].base_addr = addr2; | |
5140 | cy_card[card_no].ctl_addr = addr0; | |
5141 | cy_card[card_no].irq = irq; | |
5142 | cy_card[card_no].bus_index = 1; | |
5143 | cy_card[card_no].first_line = cy_next_channel; | |
5144 | retval = cy_init_card(&cy_card[card_no]); | |
5145 | if (retval) | |
5146 | goto err_null; | |
58936d8d | 5147 | |
3137553d | 5148 | pci_set_drvdata(pdev, &cy_card[card_no]); |
58936d8d | 5149 | |
3137553d JS |
5150 | if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || |
5151 | device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { | |
5152 | /* enable interrupts in the PCI interface */ | |
5153 | plx_ver = readb(addr2 + CyPLX_VER) & 0x0f; | |
5154 | switch (plx_ver) { | |
5155 | case PLX_9050: | |
5156 | ||
5157 | cy_writeb(addr0 + 0x4c, 0x43); | |
5158 | break; | |
5159 | ||
5160 | case PLX_9060: | |
5161 | case PLX_9080: | |
5162 | default: /* Old boards, use PLX_9060 */ | |
054f5b0a | 5163 | plx_init(pdev, irq, addr0); |
3137553d JS |
5164 | cy_writew(addr0 + 0x68, readw(addr0 + 0x68) | 0x0900); |
5165 | break; | |
5166 | } | |
58936d8d JS |
5167 | } |
5168 | ||
3137553d JS |
5169 | dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from " |
5170 | "port %d.\n", card_name, card_no + 1, nchan, cy_next_channel); | |
5171 | for (i = cy_next_channel; i < cy_next_channel + nchan; i++) | |
5172 | tty_register_device(cy_serial_driver, i, &pdev->dev); | |
5173 | cy_next_channel += nchan; | |
5174 | ||
58936d8d | 5175 | return 0; |
3137553d JS |
5176 | err_null: |
5177 | cy_card[card_no].base_addr = NULL; | |
5178 | free_irq(irq, &cy_card[card_no]); | |
5179 | err_unmap: | |
5180 | pci_iounmap(pdev, addr0); | |
5181 | if (addr2) | |
5182 | pci_iounmap(pdev, addr2); | |
5183 | err_reg: | |
5184 | pci_release_regions(pdev); | |
5185 | err_dis: | |
5186 | pci_disable_device(pdev); | |
5187 | err: | |
5188 | return retval; | |
58936d8d | 5189 | } |
58936d8d | 5190 | |
6747cd93 | 5191 | static void __devexit cy_pci_remove(struct pci_dev *pdev) |
58936d8d | 5192 | { |
38d09093 | 5193 | struct cyclades_card *cinfo = pci_get_drvdata(pdev); |
f3851e73 | 5194 | unsigned int i; |
38d09093 | 5195 | |
85c93fa9 | 5196 | /* non-Z with old PLX */ |
c2ad4c75 JS |
5197 | if (!IS_CYC_Z(*cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) == |
5198 | PLX_9050) | |
85c93fa9 JS |
5199 | cy_writeb(cinfo->ctl_addr + 0x4c, 0); |
5200 | else | |
5201 | #ifndef CONFIG_CYZ_INTR | |
c2ad4c75 | 5202 | if (!IS_CYC_Z(*cinfo)) |
85c93fa9 JS |
5203 | #endif |
5204 | cy_writew(cinfo->ctl_addr + 0x68, | |
5205 | readw(cinfo->ctl_addr + 0x68) & ~0x0900); | |
5206 | ||
38d09093 JS |
5207 | pci_iounmap(pdev, cinfo->base_addr); |
5208 | if (cinfo->ctl_addr) | |
5209 | pci_iounmap(pdev, cinfo->ctl_addr); | |
5210 | if (cinfo->irq | |
5211 | #ifndef CONFIG_CYZ_INTR | |
c2ad4c75 | 5212 | && !IS_CYC_Z(*cinfo) |
38d09093 JS |
5213 | #endif /* CONFIG_CYZ_INTR */ |
5214 | ) | |
5215 | free_irq(cinfo->irq, cinfo); | |
5216 | pci_release_regions(pdev); | |
5217 | ||
5218 | cinfo->base_addr = NULL; | |
6ad1ccc1 JS |
5219 | for (i = cinfo->first_line; i < cinfo->first_line + |
5220 | cinfo->nports; i++) | |
5221 | tty_unregister_device(cy_serial_driver, i); | |
dd025c0c JS |
5222 | cinfo->nports = 0; |
5223 | kfree(cinfo->ports); | |
38d09093 JS |
5224 | } |
5225 | ||
6747cd93 JS |
5226 | static struct pci_driver cy_pci_driver = { |
5227 | .name = "cyclades", | |
5228 | .id_table = cy_pci_dev_id, | |
5229 | .probe = cy_pci_probe, | |
5230 | .remove = __devexit_p(cy_pci_remove) | |
5231 | }; | |
5232 | #endif | |
5233 | ||
02f1175c | 5234 | static int |
1da177e4 | 5235 | cyclades_get_proc_info(char *buf, char **start, off_t offset, int length, |
02f1175c | 5236 | int *eof, void *data) |
1da177e4 | 5237 | { |
02f1175c | 5238 | struct cyclades_port *info; |
dd025c0c | 5239 | unsigned int i, j; |
02f1175c JS |
5240 | int len = 0; |
5241 | off_t begin = 0; | |
5242 | off_t pos = 0; | |
5243 | int size; | |
5244 | __u32 cur_jifs = jiffies; | |
5245 | ||
5246 | size = sprintf(buf, "Dev TimeOpen BytesOut IdleOut BytesIn " | |
5247 | "IdleIn Overruns Ldisc\n"); | |
5248 | ||
5249 | pos += size; | |
1da177e4 | 5250 | len += size; |
1da177e4 | 5251 | |
02f1175c | 5252 | /* Output one line for each known port */ |
dd025c0c JS |
5253 | for (i = 0; i < NR_CARDS; i++) |
5254 | for (j = 0; j < cy_card[i].nports; j++) { | |
5255 | info = &cy_card[i].ports[j]; | |
5256 | ||
5257 | if (info->count) | |
5258 | size = sprintf(buf + len, "%3d %8lu %10lu %8lu " | |
5259 | "%10lu %8lu %9lu %6ld\n", info->line, | |
5260 | (cur_jifs - info->idle_stats.in_use) / | |
5261 | HZ, info->idle_stats.xmit_bytes, | |
5262 | (cur_jifs - info->idle_stats.xmit_idle)/ | |
5263 | HZ, info->idle_stats.recv_bytes, | |
5264 | (cur_jifs - info->idle_stats.recv_idle)/ | |
5265 | HZ, info->idle_stats.overruns, | |
5266 | (long)info->tty->ldisc.num); | |
5267 | else | |
5268 | size = sprintf(buf + len, "%3d %8lu %10lu %8lu " | |
5269 | "%10lu %8lu %9lu %6ld\n", | |
5270 | info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L); | |
5271 | len += size; | |
5272 | pos = begin + len; | |
5273 | ||
5274 | if (pos < offset) { | |
5275 | len = 0; | |
5276 | begin = pos; | |
5277 | } | |
5278 | if (pos > offset + length) | |
5279 | goto done; | |
02f1175c | 5280 | } |
02f1175c | 5281 | *eof = 1; |
1da177e4 | 5282 | done: |
02f1175c JS |
5283 | *start = buf + (offset - begin); /* Start of wanted data */ |
5284 | len -= (offset - begin); /* Start slop */ | |
5285 | if (len > length) | |
5286 | len = length; /* Ending slop */ | |
5287 | if (len < 0) | |
5288 | len = 0; | |
5289 | return len; | |
1da177e4 LT |
5290 | } |
5291 | ||
5292 | /* The serial driver boot-time initialization code! | |
5293 | Hardware I/O ports are mapped to character special devices on a | |
5294 | first found, first allocated manner. That is, this code searches | |
5295 | for Cyclom cards in the system. As each is found, it is probed | |
5296 | to discover how many chips (and thus how many ports) are present. | |
5297 | These ports are mapped to the tty ports 32 and upward in monotonic | |
5298 | fashion. If an 8-port card is replaced with a 16-port card, the | |
5299 | port mapping on a following card will shift. | |
5300 | ||
5301 | This approach is different from what is used in the other serial | |
5302 | device driver because the Cyclom is more properly a multiplexer, | |
5303 | not just an aggregation of serial ports on one card. | |
5304 | ||
5305 | If there are more cards with more ports than have been | |
5306 | statically allocated above, a warning is printed and the | |
5307 | extra ports are ignored. | |
5308 | */ | |
5309 | ||
b68e31d0 | 5310 | static const struct tty_operations cy_ops = { |
02f1175c JS |
5311 | .open = cy_open, |
5312 | .close = cy_close, | |
5313 | .write = cy_write, | |
5314 | .put_char = cy_put_char, | |
5315 | .flush_chars = cy_flush_chars, | |
5316 | .write_room = cy_write_room, | |
5317 | .chars_in_buffer = cy_chars_in_buffer, | |
5318 | .flush_buffer = cy_flush_buffer, | |
5319 | .ioctl = cy_ioctl, | |
5320 | .throttle = cy_throttle, | |
5321 | .unthrottle = cy_unthrottle, | |
5322 | .set_termios = cy_set_termios, | |
5323 | .stop = cy_stop, | |
5324 | .start = cy_start, | |
5325 | .hangup = cy_hangup, | |
5326 | .break_ctl = cy_break, | |
5327 | .wait_until_sent = cy_wait_until_sent, | |
5328 | .read_proc = cyclades_get_proc_info, | |
5329 | .tiocmget = cy_tiocmget, | |
5330 | .tiocmset = cy_tiocmset, | |
1da177e4 LT |
5331 | }; |
5332 | ||
02f1175c | 5333 | static int __init cy_init(void) |
1da177e4 | 5334 | { |
dd025c0c | 5335 | unsigned int nboards; |
9dacf3b2 | 5336 | int retval = -ENOMEM; |
02f1175c JS |
5337 | |
5338 | cy_serial_driver = alloc_tty_driver(NR_PORTS); | |
5339 | if (!cy_serial_driver) | |
9dacf3b2 | 5340 | goto err; |
21719191 JS |
5341 | |
5342 | printk(KERN_INFO "Cyclades driver " CY_VERSION " (built %s %s)\n", | |
5343 | __DATE__, __TIME__); | |
02f1175c JS |
5344 | |
5345 | /* Initialize the tty_driver structure */ | |
5346 | ||
5347 | cy_serial_driver->owner = THIS_MODULE; | |
5348 | cy_serial_driver->driver_name = "cyclades"; | |
5349 | cy_serial_driver->name = "ttyC"; | |
5350 | cy_serial_driver->major = CYCLADES_MAJOR; | |
5351 | cy_serial_driver->minor_start = 0; | |
5352 | cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL; | |
5353 | cy_serial_driver->subtype = SERIAL_TYPE_NORMAL; | |
5354 | cy_serial_driver->init_termios = tty_std_termios; | |
5355 | cy_serial_driver->init_termios.c_cflag = | |
5356 | B9600 | CS8 | CREAD | HUPCL | CLOCAL; | |
6ad1ccc1 | 5357 | cy_serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; |
02f1175c JS |
5358 | tty_set_operations(cy_serial_driver, &cy_ops); |
5359 | ||
9dacf3b2 JS |
5360 | retval = tty_register_driver(cy_serial_driver); |
5361 | if (retval) { | |
5362 | printk(KERN_ERR "Couldn't register Cyclades serial driver\n"); | |
5363 | goto err_frtty; | |
5364 | } | |
02f1175c | 5365 | |
02f1175c JS |
5366 | /* the code below is responsible to find the boards. Each different |
5367 | type of board has its own detection routine. If a board is found, | |
5368 | the next cy_card structure available is set by the detection | |
5369 | routine. These functions are responsible for checking the | |
5370 | availability of cy_card and cy_port data structures and updating | |
5371 | the cy_next_channel. */ | |
5372 | ||
5373 | /* look for isa boards */ | |
14a55a67 | 5374 | nboards = cy_detect_isa(); |
02f1175c | 5375 | |
6747cd93 | 5376 | #ifdef CONFIG_PCI |
02f1175c | 5377 | /* look for pci boards */ |
6747cd93 JS |
5378 | retval = pci_register_driver(&cy_pci_driver); |
5379 | if (retval && !nboards) | |
9dacf3b2 | 5380 | goto err_unr; |
6747cd93 | 5381 | #endif |
9dacf3b2 JS |
5382 | |
5383 | return 0; | |
5384 | err_unr: | |
5385 | tty_unregister_driver(cy_serial_driver); | |
5386 | err_frtty: | |
5387 | put_tty_driver(cy_serial_driver); | |
5388 | err: | |
5389 | return retval; | |
02f1175c | 5390 | } /* cy_init */ |
1da177e4 | 5391 | |
02f1175c | 5392 | static void __exit cy_cleanup_module(void) |
1da177e4 | 5393 | { |
dd025c0c | 5394 | struct cyclades_card *card; |
02f1175c | 5395 | int i, e1; |
1da177e4 LT |
5396 | |
5397 | #ifndef CONFIG_CYZ_INTR | |
b7050906 | 5398 | del_timer_sync(&cyz_timerlist); |
1da177e4 LT |
5399 | #endif /* CONFIG_CYZ_INTR */ |
5400 | ||
02f1175c | 5401 | if ((e1 = tty_unregister_driver(cy_serial_driver))) |
21719191 JS |
5402 | printk(KERN_ERR "failed to unregister Cyclades serial " |
5403 | "driver(%d)\n", e1); | |
1da177e4 | 5404 | |
6747cd93 JS |
5405 | #ifdef CONFIG_PCI |
5406 | pci_unregister_driver(&cy_pci_driver); | |
5407 | #endif | |
5408 | ||
02f1175c | 5409 | for (i = 0; i < NR_CARDS; i++) { |
dd025c0c JS |
5410 | card = &cy_card[i]; |
5411 | if (card->base_addr) { | |
85c93fa9 | 5412 | /* clear interrupt */ |
dd025c0c JS |
5413 | cy_writeb(card->base_addr + Cy_ClrIntr, 0); |
5414 | iounmap(card->base_addr); | |
5415 | if (card->ctl_addr) | |
5416 | iounmap(card->ctl_addr); | |
5417 | if (card->irq | |
1da177e4 | 5418 | #ifndef CONFIG_CYZ_INTR |
dd025c0c | 5419 | && !IS_CYC_Z(*card) |
1da177e4 | 5420 | #endif /* CONFIG_CYZ_INTR */ |
02f1175c | 5421 | ) |
dd025c0c JS |
5422 | free_irq(card->irq, card); |
5423 | for (e1 = card->first_line; | |
5424 | e1 < card->first_line + | |
5425 | card->nports; e1++) | |
6ad1ccc1 | 5426 | tty_unregister_device(cy_serial_driver, e1); |
dd025c0c | 5427 | kfree(card->ports); |
02f1175c JS |
5428 | } |
5429 | } | |
f2462bfe JS |
5430 | |
5431 | put_tty_driver(cy_serial_driver); | |
1da177e4 LT |
5432 | } /* cy_cleanup_module */ |
5433 | ||
5434 | module_init(cy_init); | |
5435 | module_exit(cy_cleanup_module); | |
5436 | ||
5437 | MODULE_LICENSE("GPL"); | |
c8e1693a | 5438 | MODULE_VERSION(CY_VERSION); |