[linux-2.6-block.git] / drivers / bluetooth / Kconfig

# SPDX-License-Identifier: GPL-2.0

menu "Bluetooth device drivers"
	depends on BT

config BT_INTEL
	tristate
	select REGMAP

config BT_BCM
	tristate
	select FW_LOADER

config BT_RTL
	tristate
	select FW_LOADER

config BT_QCA
	tristate
	select FW_LOADER

config BT_HCIBTUSB
	tristate "HCI USB driver"
	depends on USB
	select BT_INTEL
	help
	  Bluetooth HCI USB driver.
	  This driver is required if you want to use Bluetooth devices with
	  USB interface.

	  Say Y here to compile support for Bluetooth USB devices into the
	  kernel or say M to compile it as module (btusb).

config BT_HCIBTUSB_AUTOSUSPEND
	bool "Enable USB autosuspend for Bluetooth USB devices by default"
	depends on BT_HCIBTUSB
	help
	  Say Y here to enable USB autosuspend for Bluetooth USB devices by
	  default.

	  This can be overridden by passing btusb.enable_autosuspend=[y|n]
	  on the kernel commandline.

config BT_HCIBTUSB_BCM
	bool "Broadcom protocol support"
	depends on BT_HCIBTUSB
	select BT_BCM
	default y
	help
	  The Broadcom protocol support enables firmware and patchram
	  download support for Broadcom Bluetooth controllers.

	  Say Y here to compile support for Broadcom protocol.

config BT_HCIBTUSB_MTK
	bool "MediaTek protocol support"
	depends on BT_HCIBTUSB
	default n
	help
	  The MediaTek protocol support enables firmware download
	  support and chip initialization for MediaTek Bluetooth
	  USB controllers.

	  Say Y here to compile support for MediaTek protocol.

config BT_HCIBTUSB_RTL
	bool "Realtek protocol support"
	depends on BT_HCIBTUSB
	select BT_RTL
	default y
	help
	  The Realtek protocol support enables firmware and configuration
	  download support for Realtek Bluetooth controllers.

	  Say Y here to compile support for Realtek protocol.

config BT_HCIBTSDIO
	tristate "HCI SDIO driver"
	depends on MMC
	help
	  Bluetooth HCI SDIO driver.
	  This driver is required if you want to use Bluetooth device with
	  SDIO interface.

	  Say Y here to compile support for Bluetooth SDIO devices into the
	  kernel or say M to compile it as module (btsdio).

config BT_HCIUART
	tristate "HCI UART driver"
	depends on SERIAL_DEV_BUS || !SERIAL_DEV_BUS
	depends on NVMEM || !NVMEM
	depends on TTY
	help
	  Bluetooth HCI UART driver.
	  This driver is required if you want to use Bluetooth devices with
	  serial port interface. You will also need this driver if you have
	  UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
	  adapter and BrainBoxes Bluetooth PC Card.

	  Say Y here to compile support for Bluetooth UART devices into the
	  kernel or say M to compile it as module (hci_uart).

config BT_HCIUART_SERDEV
	bool
	depends on SERIAL_DEV_BUS && BT_HCIUART
	default y

config BT_HCIUART_H4
	bool "UART (H4) protocol support"
	depends on BT_HCIUART
	help
	  UART (H4) is serial protocol for communication between Bluetooth
	  device and host. This protocol is required for most Bluetooth devices
	  with UART interface, including PCMCIA and CF cards.

	  Say Y here to compile support for HCI UART (H4) protocol.

config BT_HCIUART_NOKIA
	tristate "UART Nokia H4+ protocol support"
	depends on BT_HCIUART
	depends on BT_HCIUART_SERDEV
	depends on GPIOLIB
	depends on PM
	select BT_HCIUART_H4
	select BT_BCM
	help
	  Nokia H4+ is serial protocol for communication between Bluetooth
	  device and host. This protocol is required for Bluetooth devices
	  with UART interface in Nokia devices.

	  Say Y here to compile support for Nokia's H4+ protocol.

config BT_HCIUART_BCSP
	bool "BCSP protocol support"
	depends on BT_HCIUART
	select BITREVERSE
	help
	  BCSP (BlueCore Serial Protocol) is serial protocol for communication
	  between Bluetooth device and host. This protocol is required for non
	  USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
	  CF cards.

	  Say Y here to compile support for HCI BCSP protocol.

config BT_HCIUART_ATH3K
	bool "Atheros AR300x serial support"
	depends on BT_HCIUART
	select BT_HCIUART_H4
	help
	  HCIATH3K (HCI Atheros AR300x) is a serial protocol for
	  communication between host and Atheros AR300x Bluetooth devices.
	  This protocol enables AR300x chips to be enabled with
	  power management support.
	  Enable this if you have Atheros AR300x serial Bluetooth device.

	  Say Y here to compile support for HCI UART ATH3K protocol.

config BT_HCIUART_LL
	bool "HCILL protocol support"
	depends on BT_HCIUART_SERDEV
	select BT_HCIUART_H4
	help
	  HCILL (HCI Low Level) is a serial protocol for communication
	  between Bluetooth device and host. This protocol is required for
	  serial Bluetooth devices that are based on Texas Instruments'
	  BRF chips.

	  Say Y here to compile support for HCILL protocol.

config BT_HCIUART_3WIRE
	bool "Three-wire UART (H5) protocol support"
	depends on BT_HCIUART
	depends on BT_HCIUART_SERDEV
	help
	  The HCI Three-wire UART Transport Layer makes it possible to
	  user the Bluetooth HCI over a serial port interface. The HCI
	  Three-wire UART Transport Layer assumes that the UART
	  communication may have bit errors, overrun errors or burst
	  errors and thereby making CTS/RTS lines unnecessary.

	  Say Y here to compile support for Three-wire UART protocol.

config BT_HCIUART_INTEL
	bool "Intel protocol support"
	depends on BT_HCIUART
	depends on GPIOLIB
	select BT_HCIUART_H4
	select BT_INTEL
	help
	  The Intel protocol support enables Bluetooth HCI over serial
	  port interface for Intel Bluetooth controllers.

	  Say Y here to compile support for Intel protocol.

config BT_HCIUART_BCM
	bool "Broadcom protocol support"
	depends on BT_HCIUART
	depends on BT_HCIUART_SERDEV
	depends on (!ACPI || SERIAL_DEV_CTRL_TTYPORT)
	depends on GPIOLIB
	select BT_HCIUART_H4
	select BT_BCM
	help
	  The Broadcom protocol support enables Bluetooth HCI over serial
	  port interface for Broadcom Bluetooth controllers.

	  Say Y here to compile support for Broadcom protocol.

config BT_HCIUART_RTL
	bool "Realtek protocol support"
	depends on BT_HCIUART
	depends on BT_HCIUART_SERDEV
	depends on GPIOLIB
	depends on ACPI
	select BT_HCIUART_3WIRE
	select BT_RTL
	help
	  The Realtek protocol support enables Bluetooth HCI over 3-Wire
	  serial port internface for Realtek Bluetooth controllers.

	  Say Y here to compile support for Realtek protocol.

config BT_HCIUART_QCA
	bool "Qualcomm Atheros protocol support"
	depends on BT_HCIUART
	depends on BT_HCIUART_SERDEV
	select BT_HCIUART_H4
	select BT_QCA
	help
	  The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
	  over serial port interface(H4) between controller and host.
	  This protocol is required for UART clock control for QCA Bluetooth
	  devices.

	  Say Y here to compile support for QCA protocol.

config BT_HCIUART_AG6XX
	bool "Intel AG6XX protocol support"
	depends on BT_HCIUART
	select BT_HCIUART_H4
	select BT_INTEL
	help
	  The Intel/AG6XX protocol support enables Bluetooth HCI over serial
	  port interface for Intel ibt 2.1 Bluetooth controllers.

	  Say Y here to compile support for Intel AG6XX protocol.

config BT_HCIUART_MRVL
	bool "Marvell protocol support"
	depends on BT_HCIUART
	depends on BT_HCIUART_SERDEV
	select BT_HCIUART_H4
	help
	  Marvell is serial protocol for communication between Bluetooth
	  device and host. This protocol is required for most Marvell Bluetooth
	  devices with UART interface.

	  Say Y here to compile support for HCI MRVL protocol.

config BT_HCIBCM203X
	tristate "HCI BCM203x USB driver"
	depends on USB
	select FW_LOADER
	help
	  Bluetooth HCI BCM203x USB driver.
	  This driver provides the firmware loading mechanism for the Broadcom
	  Blutonium based devices.

	  Say Y here to compile support for HCI BCM203x devices into the
	  kernel or say M to compile it as module (bcm203x).

config BT_HCIBPA10X
	tristate "HCI BPA10x USB driver"
	depends on USB
	help
	  Bluetooth HCI BPA10x USB driver.
	  This driver provides support for the Digianswer BPA 100/105 Bluetooth
	  sniffer devices.

	  Say Y here to compile support for HCI BPA10x devices into the
	  kernel or say M to compile it as module (bpa10x).

config BT_HCIBFUSB
	tristate "HCI BlueFRITZ! USB driver"
	depends on USB
	select FW_LOADER
	help
	  Bluetooth HCI BlueFRITZ! USB driver.
	  This driver provides support for Bluetooth USB devices with AVM
	  interface:
	     AVM BlueFRITZ! USB

	  Say Y here to compile support for HCI BFUSB devices into the
	  kernel or say M to compile it as module (bfusb).

config BT_HCIDTL1
	tristate "HCI DTL1 (PC Card) driver"
	depends on PCMCIA
	help
	  Bluetooth HCI DTL1 (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  Nokia DTL1 interface:
	     Nokia Bluetooth Card
	     Socket Bluetooth CF Card

	  Say Y here to compile support for HCI DTL1 devices into the
	  kernel or say M to compile it as module (dtl1_cs).

config BT_HCIBT3C
	tristate "HCI BT3C (PC Card) driver"
	depends on PCMCIA
	select FW_LOADER
	help
	  Bluetooth HCI BT3C (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  3Com BT3C interface:
	     3Com Bluetooth Card (3CRWB6096)
	     HP Bluetooth Card

	  Say Y here to compile support for HCI BT3C devices into the
	  kernel or say M to compile it as module (bt3c_cs).

config BT_HCIBLUECARD
	tristate "HCI BlueCard (PC Card) driver"
	depends on PCMCIA
	help
	  Bluetooth HCI BlueCard (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  Anycom BlueCard interface:
	     Anycom Bluetooth PC Card
	     Anycom Bluetooth CF Card

	  Say Y here to compile support for HCI BlueCard devices into the
	  kernel or say M to compile it as module (bluecard_cs).

config BT_HCIVHCI
	tristate "HCI VHCI (Virtual HCI device) driver"
	help
	  Bluetooth Virtual HCI device driver.
	  This driver is required if you want to use HCI Emulation software.

	  Say Y here to compile support for virtual HCI devices into the
	  kernel or say M to compile it as module (hci_vhci).

config BT_MRVL
	tristate "Marvell Bluetooth driver support"
	help
	  The core driver to support Marvell Bluetooth devices.

	  This driver is required if you want to support
	  Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8987/8997.

	  Say Y here to compile Marvell Bluetooth driver
	  into the kernel or say M to compile it as module.

config BT_MRVL_SDIO
	tristate "Marvell BT-over-SDIO driver"
	depends on BT_MRVL && MMC
	select FW_LOADER
	select WANT_DEV_COREDUMP
	help
	  The driver for Marvell Bluetooth chipsets with SDIO interface.

	  This driver is required if you want to use Marvell Bluetooth
	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8987/SD8997
	  chipsets are supported.

	  Say Y here to compile support for Marvell BT-over-SDIO driver
	  into the kernel or say M to compile it as module.

config BT_ATH3K
	tristate "Atheros firmware download driver"
	depends on BT_HCIBTUSB
	select FW_LOADER
	help
	  Bluetooth firmware download driver.
	  This driver loads the firmware into the Atheros Bluetooth
	  chipset.

	  Say Y here to compile support for "Atheros firmware download driver"
	  into the kernel or say M to compile it as module (ath3k).

config BT_MTKSDIO
	tristate "MediaTek HCI SDIO driver"
	depends on MMC
	help
	  MediaTek Bluetooth HCI SDIO driver.
	  This driver is required if you want to use MediaTek Bluetooth
	  with SDIO interface.

	  Say Y here to compile support for MediaTek Bluetooth SDIO devices
	  into the kernel or say M to compile it as module (btmtksdio).

config BT_MTKUART
	tristate "MediaTek HCI UART driver"
	depends on SERIAL_DEV_BUS
	help
	  MediaTek Bluetooth HCI UART driver.
	  This driver is required if you want to use MediaTek Bluetooth
	  with serial interface.

	  Say Y here to compile support for MediaTek Bluetooth UART devices
	  into the kernel or say M to compile it as module (btmtkuart).

config BT_QCOMSMD
	tristate "Qualcomm SMD based HCI support"
	depends on RPMSG || (COMPILE_TEST && RPMSG=n)
	depends on QCOM_WCNSS_CTRL || (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
	select BT_QCA
	help
	  Qualcomm SMD based HCI driver.
	  This driver is used to bridge HCI data onto the shared memory
	  channels to the WCNSS core.

	  Say Y here to compile support for HCI over Qualcomm SMD into the
	  kernel or say M to compile as a module.

config BT_HCIRSI
	tristate
	help
	  Redpine BT driver.
	  This driver handles BT traffic from upper layers and pass
	  to the RSI_91x coex module for further scheduling to device

	  Say Y here to compile support for HCI over Redpine into the
	  kernel or say M to compile as a module.

endmenu
Commit	Line	Data
b2441318	1	# SPDX-License-Identifier: GPL-2.0
1da177e4 LT	2
	3	menu "Bluetooth device drivers"
	4	depends on BT
	5
48f0ed1b MH	6	config BT_INTEL
48f0ed1b MH	7	tristate
d06f107b	8	select REGMAP
48f0ed1b	9
4fba30f0 MH	10	config BT_BCM
4fba30f0 MH	11	tristate
1c8ba6d0	12	select FW_LOADER
4fba30f0	13
db33c77d CC	14	config BT_RTL
	15	tristate
	16	select FW_LOADER
	17
83e81961 BYTK	18	config BT_QCA
	19	tristate
	20	select FW_LOADER
	21
5e23b923	22	config BT_HCIBTUSB
9bfa35fe MH	23	tristate "HCI USB driver"
9bfa35fe MH	24	depends on USB
4185a0f5	25	select BT_INTEL
5e23b923 MH	26	help
	27	Bluetooth HCI USB driver.
	28	This driver is required if you want to use Bluetooth devices with
	29	USB interface.
	30
5e23b923 MH	31	Say Y here to compile support for Bluetooth USB devices into the
	32	kernel or say M to compile it as module (btusb).
	33
eff2d68c	34	config BT_HCIBTUSB_AUTOSUSPEND
e7232d18	35	bool "Enable USB autosuspend for Bluetooth USB devices by default"
eff2d68c HG	36	depends on BT_HCIBTUSB
	37	help
	38	Say Y here to enable USB autosuspend for Bluetooth USB devices by
	39	default.
	40
	41	This can be overridden by passing btusb.enable_autosuspend=[y\|n]
	42	on the kernel commandline.
	43
c2bfb100 MH	44	config BT_HCIBTUSB_BCM
	45	bool "Broadcom protocol support"
	46	depends on BT_HCIBTUSB
	47	select BT_BCM
	48	default y
	49	help
	50	The Broadcom protocol support enables firmware and patchram
	51	download support for Broadcom Bluetooth controllers.
	52
	53	Say Y here to compile support for Broadcom protocol.
	54
a1c49c43 SW	55	config BT_HCIBTUSB_MTK
	56	bool "MediaTek protocol support"
	57	depends on BT_HCIBTUSB
	58	default n
	59	help
	60	The MediaTek protocol support enables firmware download
	61	support and chip initialization for MediaTek Bluetooth
	62	USB controllers.
	63
	64	Say Y here to compile support for MediaTek protocol.
	65
db33c77d CC	66	config BT_HCIBTUSB_RTL
	67	bool "Realtek protocol support"
	68	depends on BT_HCIBTUSB
	69	select BT_RTL
	70	default y
	71	help
	72	The Realtek protocol support enables firmware and configuration
	73	download support for Realtek Bluetooth controllers.
	74
	75	Say Y here to compile support for Realtek protocol.
	76
ddbaf13e MH	77	config BT_HCIBTSDIO
	78	tristate "HCI SDIO driver"
	79	depends on MMC
	80	help
	81	Bluetooth HCI SDIO driver.
	82	This driver is required if you want to use Bluetooth device with
	83	SDIO interface.
	84
	85	Say Y here to compile support for Bluetooth SDIO devices into the
	86	kernel or say M to compile it as module (btsdio).
	87
1da177e4 LT	88	config BT_HCIUART
1da177e4 LT	89	tristate "HCI UART driver"
05e89fb5	90	depends on SERIAL_DEV_BUS \|\| !SERIAL_DEV_BUS
b71b25fe	91	depends on NVMEM \|\| !NVMEM
4f73bc4d	92	depends on TTY
1da177e4 LT	93	help
	94	Bluetooth HCI UART driver.
	95	This driver is required if you want to use Bluetooth devices with
8ba8b4c0 SG	96	serial port interface. You will also need this driver if you have
8ba8b4c0 SG	97	UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
1da177e4 LT	98	adapter and BrainBoxes Bluetooth PC Card.
	99
	100	Say Y here to compile support for Bluetooth UART devices into the
	101	kernel or say M to compile it as module (hci_uart).
	102
1fb78fb6 AB	103	config BT_HCIUART_SERDEV
	104	bool
	105	depends on SERIAL_DEV_BUS && BT_HCIUART
1fb78fb6 AB	106	default y
1fb78fb6 AB	107
1da177e4 LT	108	config BT_HCIUART_H4
	109	bool "UART (H4) protocol support"
	110	depends on BT_HCIUART
	111	help
8ba8b4c0 SG	112	UART (H4) is serial protocol for communication between Bluetooth
	113	device and host. This protocol is required for most Bluetooth devices
	114	with UART interface, including PCMCIA and CF cards.
1da177e4 LT	115
	116	Say Y here to compile support for HCI UART (H4) protocol.
	117
7bb31868 SR	118	config BT_HCIUART_NOKIA
	119	tristate "UART Nokia H4+ protocol support"
	120	depends on BT_HCIUART
1fb78fb6	121	depends on BT_HCIUART_SERDEV
a3a446c7	122	depends on GPIOLIB
7bb31868	123	depends on PM
c42c88e6	124	select BT_HCIUART_H4
6a485420	125	select BT_BCM
7bb31868 SR	126	help
	127	Nokia H4+ is serial protocol for communication between Bluetooth
	128	device and host. This protocol is required for Bluetooth devices
	129	with UART interface in Nokia devices.
	130
	131	Say Y here to compile support for Nokia's H4+ protocol.
	132
1da177e4 LT	133	config BT_HCIUART_BCSP
	134	bool "BCSP protocol support"
	135	depends on BT_HCIUART
d3a8eab0	136	select BITREVERSE
1da177e4	137	help
8ba8b4c0	138	BCSP (BlueCore Serial Protocol) is serial protocol for communication
1da177e4 LT	139	between Bluetooth device and host. This protocol is required for non
	140	USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
	141	CF cards.
	142
	143	Say Y here to compile support for HCI BCSP protocol.
	144
b3190df6 SS	145	config BT_HCIUART_ATH3K
	146	bool "Atheros AR300x serial support"
	147	depends on BT_HCIUART
d90aa682	148	select BT_HCIUART_H4
b3190df6 SS	149	help
	150	HCIATH3K (HCI Atheros AR300x) is a serial protocol for
	151	communication between host and Atheros AR300x Bluetooth devices.
	152	This protocol enables AR300x chips to be enabled with
	153	power management support.
	154	Enable this if you have Atheros AR300x serial Bluetooth device.
	155
	156	Say Y here to compile support for HCI UART ATH3K protocol.
	157
166d2f6a OBC	158	config BT_HCIUART_LL
166d2f6a OBC	159	bool "HCILL protocol support"
76c4969f	160	depends on BT_HCIUART_SERDEV
f9d7c8fd	161	select BT_HCIUART_H4
166d2f6a OBC	162	help
	163	HCILL (HCI Low Level) is a serial protocol for communication
	164	between Bluetooth device and host. This protocol is required for
	165	serial Bluetooth devices that are based on Texas Instruments'
	166	BRF chips.
	167
	168	Say Y here to compile support for HCILL protocol.
	169
7dec65c8 JH	170	config BT_HCIUART_3WIRE
	171	bool "Three-wire UART (H5) protocol support"
	172	depends on BT_HCIUART
6c3711ec	173	depends on BT_HCIUART_SERDEV
7dec65c8 JH	174	help
	175	The HCI Three-wire UART Transport Layer makes it possible to
	176	user the Bluetooth HCI over a serial port interface. The HCI
	177	Three-wire UART Transport Layer assumes that the UART
	178	communication may have bit errors, overrun errors or burst
	179	errors and thereby making CTS/RTS lines unnecessary.
	180
	181	Say Y here to compile support for Three-wire UART protocol.
	182
16e3887f MH	183	config BT_HCIUART_INTEL
	184	bool "Intel protocol support"
	185	depends on BT_HCIUART
a3a446c7	186	depends on GPIOLIB
ca93cee5	187	select BT_HCIUART_H4
bca03c95	188	select BT_INTEL
16e3887f MH	189	help
	190	The Intel protocol support enables Bluetooth HCI over serial
	191	port interface for Intel Bluetooth controllers.
	192
	193	Say Y here to compile support for Intel protocol.
	194
e9a2dd26 MH	195	config BT_HCIUART_BCM
	196	bool "Broadcom protocol support"
	197	depends on BT_HCIUART
33cd149e	198	depends on BT_HCIUART_SERDEV
4294625e	199	depends on (!ACPI \|\| SERIAL_DEV_CTRL_TTYPORT)
a3a446c7	200	depends on GPIOLIB
bdd8818e	201	select BT_HCIUART_H4
3e0ac12a	202	select BT_BCM
e9a2dd26 MH	203	help
	204	The Broadcom protocol support enables Bluetooth HCI over serial
	205	port interface for Broadcom Bluetooth controllers.
	206
	207	Say Y here to compile support for Broadcom protocol.
	208
b9763cdf MH	209	config BT_HCIUART_RTL
	210	bool "Realtek protocol support"
	211	depends on BT_HCIUART
	212	depends on BT_HCIUART_SERDEV
	213	depends on GPIOLIB
51474eff	214	depends on ACPI
b9763cdf MH	215	select BT_HCIUART_3WIRE
	216	select BT_RTL
	217	help
	218	The Realtek protocol support enables Bluetooth HCI over 3-Wire
	219	serial port internface for Realtek Bluetooth controllers.
	220
	221	Say Y here to compile support for Realtek protocol.
	222
0ff252c1 BYTK	223	config BT_HCIUART_QCA
	224	bool "Qualcomm Atheros protocol support"
	225	depends on BT_HCIUART
05ba533c	226	depends on BT_HCIUART_SERDEV
0ff252c1 BYTK	227	select BT_HCIUART_H4
	228	select BT_QCA
	229	help
	230	The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
	231	over serial port interface(H4) between controller and host.
	232	This protocol is required for UART clock control for QCA Bluetooth
	233	devices.
	234
	235	Say Y here to compile support for QCA protocol.
	236
395174bb LP	237	config BT_HCIUART_AG6XX
	238	bool "Intel AG6XX protocol support"
	239	depends on BT_HCIUART
	240	select BT_HCIUART_H4
	241	select BT_INTEL
	242	help
	243	The Intel/AG6XX protocol support enables Bluetooth HCI over serial
	244	port interface for Intel ibt 2.1 Bluetooth controllers.
	245
	246	Say Y here to compile support for Intel AG6XX protocol.
162f812f LP	247
	248	config BT_HCIUART_MRVL
	249	bool "Marvell protocol support"
	250	depends on BT_HCIUART
be70e5e7	251	depends on BT_HCIUART_SERDEV
162f812f LP	252	select BT_HCIUART_H4
	253	help
	254	Marvell is serial protocol for communication between Bluetooth
	255	device and host. This protocol is required for most Marvell Bluetooth
	256	devices with UART interface.
	257
	258	Say Y here to compile support for HCI MRVL protocol.
395174bb	259
1da177e4 LT	260	config BT_HCIBCM203X
	261	tristate "HCI BCM203x USB driver"
	262	depends on USB
	263	select FW_LOADER
	264	help
	265	Bluetooth HCI BCM203x USB driver.
	266	This driver provides the firmware loading mechanism for the Broadcom
	267	Blutonium based devices.
	268
	269	Say Y here to compile support for HCI BCM203x devices into the
	270	kernel or say M to compile it as module (bcm203x).
	271
	272	config BT_HCIBPA10X
	273	tristate "HCI BPA10x USB driver"
07eb96a5	274	depends on USB
1da177e4 LT	275	help
	276	Bluetooth HCI BPA10x USB driver.
	277	This driver provides support for the Digianswer BPA 100/105 Bluetooth
	278	sniffer devices.
	279
	280	Say Y here to compile support for HCI BPA10x devices into the
	281	kernel or say M to compile it as module (bpa10x).
	282
	283	config BT_HCIBFUSB
	284	tristate "HCI BlueFRITZ! USB driver"
	285	depends on USB
	286	select FW_LOADER
	287	help
	288	Bluetooth HCI BlueFRITZ! USB driver.
	289	This driver provides support for Bluetooth USB devices with AVM
	290	interface:
	291	AVM BlueFRITZ! USB
	292
	293	Say Y here to compile support for HCI BFUSB devices into the
	294	kernel or say M to compile it as module (bfusb).
	295
	296	config BT_HCIDTL1
	297	tristate "HCI DTL1 (PC Card) driver"
	298	depends on PCMCIA
	299	help
	300	Bluetooth HCI DTL1 (PC Card) driver.
	301	This driver provides support for Bluetooth PCMCIA devices with
	302	Nokia DTL1 interface:
	303	Nokia Bluetooth Card
	304	Socket Bluetooth CF Card
	305
	306	Say Y here to compile support for HCI DTL1 devices into the
	307	kernel or say M to compile it as module (dtl1_cs).
	308
	309	config BT_HCIBT3C
	310	tristate "HCI BT3C (PC Card) driver"
	311	depends on PCMCIA
	312	select FW_LOADER
	313	help
	314	Bluetooth HCI BT3C (PC Card) driver.
	315	This driver provides support for Bluetooth PCMCIA devices with
	316	3Com BT3C interface:
	317	3Com Bluetooth Card (3CRWB6096)
	318	HP Bluetooth Card
	319
	320	Say Y here to compile support for HCI BT3C devices into the
	321	kernel or say M to compile it as module (bt3c_cs).
	322
	323	config BT_HCIBLUECARD
	324	tristate "HCI BlueCard (PC Card) driver"
	325	depends on PCMCIA
	326	help
	327	Bluetooth HCI BlueCard (PC Card) driver.
	328	This driver provides support for Bluetooth PCMCIA devices with
	329	Anycom BlueCard interface:
	330	Anycom Bluetooth PC Card
	331	Anycom Bluetooth CF Card
	332
	333	Say Y here to compile support for HCI BlueCard devices into the
	334	kernel or say M to compile it as module (bluecard_cs).
	335
1da177e4 LT	336	config BT_HCIVHCI
	337	tristate "HCI VHCI (Virtual HCI device) driver"
	338	help
	339	Bluetooth Virtual HCI device driver.
	340	This driver is required if you want to use HCI Emulation software.
	341
	342	Say Y here to compile support for virtual HCI devices into the
	343	kernel or say M to compile it as module (hci_vhci).
	344
132ff4e5 BZ	345	config BT_MRVL
132ff4e5 BZ	346	tristate "Marvell Bluetooth driver support"
132ff4e5 BZ	347	help
	348	The core driver to support Marvell Bluetooth devices.
	349
	350	This driver is required if you want to support
73623340	351	Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8987/8997.
132ff4e5 BZ	352
	353	Say Y here to compile Marvell Bluetooth driver
	354	into the kernel or say M to compile it as module.
	355
789221ec BZ	356	config BT_MRVL_SDIO
	357	tristate "Marvell BT-over-SDIO driver"
	358	depends on BT_MRVL && MMC
e7a25f98	359	select FW_LOADER
dc759613	360	select WANT_DEV_COREDUMP
789221ec BZ	361	help
	362	The driver for Marvell Bluetooth chipsets with SDIO interface.
	363
	364	This driver is required if you want to use Marvell Bluetooth
73623340	365	devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8987/SD8997
2ac654f7	366	chipsets are supported.
789221ec BZ	367
	368	Say Y here to compile support for Marvell BT-over-SDIO driver
	369	into the kernel or say M to compile it as module.
	370
9670d80a VK	371	config BT_ATH3K
	372	tristate "Atheros firmware download driver"
	373	depends on BT_HCIBTUSB
	374	select FW_LOADER
	375	help
	376	Bluetooth firmware download driver.
	377	This driver loads the firmware into the Atheros Bluetooth
	378	chipset.
1da177e4	379
9670d80a VK	380	Say Y here to compile support for "Atheros firmware download driver"
	381	into the kernel or say M to compile it as module (ath3k).
	382
9aebfd4a SW	383	config BT_MTKSDIO
	384	tristate "MediaTek HCI SDIO driver"
	385	depends on MMC
	386	help
	387	MediaTek Bluetooth HCI SDIO driver.
	388	This driver is required if you want to use MediaTek Bluetooth
	389	with SDIO interface.
	390
	391	Say Y here to compile support for MediaTek Bluetooth SDIO devices
	392	into the kernel or say M to compile it as module (btmtksdio).
	393
7237c4c9 SW	394	config BT_MTKUART
	395	tristate "MediaTek HCI UART driver"
	396	depends on SERIAL_DEV_BUS
	397	help
	398	MediaTek Bluetooth HCI UART driver.
	399	This driver is required if you want to use MediaTek Bluetooth
	400	with serial interface.
	401
	402	Say Y here to compile support for MediaTek Bluetooth UART devices
	403	into the kernel or say M to compile it as module (btmtkuart).
	404
1511cc75 BA	405	config BT_QCOMSMD
1511cc75 BA	406	tristate "Qualcomm SMD based HCI support"
5052de8d	407	depends on RPMSG \|\| (COMPILE_TEST && RPMSG=n)
6e9e6cc8	408	depends on QCOM_WCNSS_CTRL \|\| (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
1511cc75 BA	409	select BT_QCA
	410	help
	411	Qualcomm SMD based HCI driver.
	412	This driver is used to bridge HCI data onto the shared memory
	413	channels to the WCNSS core.
	414
	415	Say Y here to compile support for HCI over Qualcomm SMD into the
	416	kernel or say M to compile as a module.
	417
38aa4da5	418	config BT_HCIRSI
255dd5b7	419	tristate
38aa4da5 PRG	420	help
	421	Redpine BT driver.
	422	This driver handles BT traffic from upper layers and pass
	423	to the RSI_91x coex module for further scheduling to device
	424
	425	Say Y here to compile support for HCI over Redpine into the
	426	kernel or say M to compile as a module.
	427
9670d80a	428	endmenu