mmc: sdhci-pltfm: use devm_ioremap_resource()
[linux-2.6-block.git] / drivers / ata / pata_sil680.c
CommitLineData
669a5db4
JG
1/*
2 * pata_sil680.c - SIL680 PATA for new ATA layer
3 * (C) 2005 Red Hat Inc
669a5db4
JG
4 *
5 * based upon
6 *
7 * linux/drivers/ide/pci/siimage.c Version 1.07 Nov 30, 2003
8 *
9 * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
10 * Copyright (C) 2003 Red Hat <alan@redhat.com>
11 *
12 * May be copied or modified under the terms of the GNU General Public License
13 *
25985edc 14 * Documentation publicly available.
669a5db4
JG
15 *
16 * If you have strange problems with nVidia chipset systems please
17 * see the SI support documentation and update your system BIOS
3a4fa0a2 18 * if necessary
669a5db4
JG
19 *
20 * TODO
21 * If we know all our devices are LBA28 (or LBA28 sized) we could use
22 * the command fifo mode.
23 */
24
25#include <linux/kernel.h>
26#include <linux/module.h>
27#include <linux/pci.h>
669a5db4
JG
28#include <linux/blkdev.h>
29#include <linux/delay.h>
30#include <scsi/scsi_host.h>
31#include <linux/libata.h>
32
33#define DRV_NAME "pata_sil680"
871af121 34#define DRV_VERSION "0.4.9"
669a5db4 35
79b0bde1
JG
36#define SIL680_MMIO_BAR 5
37
669a5db4
JG
38/**
39 * sil680_selreg - return register base
6352187e 40 * @ap: ATA interface
669a5db4
JG
41 * @r: config offset
42 *
6352187e
BZ
43 * Turn a config register offset into the right address in PCI space
44 * to access the control register in question.
45 *
25985edc 46 * Thankfully this is a configuration operation so isn't performance
669a5db4
JG
47 * criticial.
48 */
49
50static unsigned long sil680_selreg(struct ata_port *ap, int r)
51{
52 unsigned long base = 0xA0 + r;
53 base += (ap->port_no << 4);
54 return base;
55}
56
57/**
58 * sil680_seldev - return register base
6352187e 59 * @ap: ATA interface
669a5db4
JG
60 * @r: config offset
61 *
6352187e
BZ
62 * Turn a config register offset into the right address in PCI space
63 * to access the control register in question including accounting for
64 * the unit shift.
669a5db4
JG
65 */
66
67static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r)
68{
69 unsigned long base = 0xA0 + r;
70 base += (ap->port_no << 4);
71 base |= adev->devno ? 2 : 0;
72 return base;
73}
74
75
76/**
77 * sil680_cable_detect - cable detection
78 * @ap: ATA port
79 *
80 * Perform cable detection. The SIL680 stores this in PCI config
81 * space for us.
82 */
83
7a113d38
BZ
84static int sil680_cable_detect(struct ata_port *ap)
85{
669a5db4
JG
86 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
87 unsigned long addr = sil680_selreg(ap, 0);
88 u8 ata66;
89 pci_read_config_byte(pdev, addr, &ata66);
90 if (ata66 & 1)
91 return ATA_CBL_PATA80;
92 else
93 return ATA_CBL_PATA40;
94}
95
669a5db4 96/**
6352187e 97 * sil680_set_piomode - set PIO mode data
669a5db4
JG
98 * @ap: ATA interface
99 * @adev: ATA device
100 *
101 * Program the SIL680 registers for PIO mode. Note that the task speed
102 * registers are shared between the devices so we must pick the lowest
103 * mode for command work.
104 */
105
106static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev)
107{
9b8ad4ac
BZ
108 static const u16 speed_p[5] = {
109 0x328A, 0x2283, 0x1104, 0x10C3, 0x10C1
110 };
111 static const u16 speed_t[5] = {
112 0x328A, 0x2283, 0x1281, 0x10C3, 0x10C1
113 };
669a5db4
JG
114
115 unsigned long tfaddr = sil680_selreg(ap, 0x02);
116 unsigned long addr = sil680_seldev(ap, adev, 0x04);
cb0e34ba 117 unsigned long addr_mask = 0x80 + 4 * ap->port_no;
669a5db4
JG
118 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
119 int pio = adev->pio_mode - XFER_PIO_0;
120 int lowest_pio = pio;
cb0e34ba 121 int port_shift = 4 * adev->devno;
669a5db4 122 u16 reg;
cb0e34ba 123 u8 mode;
669a5db4
JG
124
125 struct ata_device *pair = ata_dev_pair(adev);
126
127 if (pair != NULL && adev->pio_mode > pair->pio_mode)
128 lowest_pio = pair->pio_mode - XFER_PIO_0;
129
130 pci_write_config_word(pdev, addr, speed_p[pio]);
131 pci_write_config_word(pdev, tfaddr, speed_t[lowest_pio]);
132
133 pci_read_config_word(pdev, tfaddr-2, &reg);
cb0e34ba 134 pci_read_config_byte(pdev, addr_mask, &mode);
a84471fe 135
669a5db4 136 reg &= ~0x0200; /* Clear IORDY */
cb0e34ba 137 mode &= ~(3 << port_shift); /* Clear IORDY and DMA bits */
a84471fe 138
cb0e34ba 139 if (ata_pio_need_iordy(adev)) {
669a5db4 140 reg |= 0x0200; /* Enable IORDY */
cb0e34ba
A
141 mode |= 1 << port_shift;
142 }
669a5db4 143 pci_write_config_word(pdev, tfaddr-2, reg);
cb0e34ba 144 pci_write_config_byte(pdev, addr_mask, mode);
669a5db4
JG
145}
146
147/**
6352187e 148 * sil680_set_dmamode - set DMA mode data
669a5db4
JG
149 * @ap: ATA interface
150 * @adev: ATA device
151 *
6352187e
BZ
152 * Program the MWDMA/UDMA modes for the sil680 chipset.
153 *
154 * The MWDMA mode values are pulled from a lookup table
669a5db4
JG
155 * while the chipset uses mode number for UDMA.
156 */
157
158static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev)
159{
9b8ad4ac 160 static const u8 ultra_table[2][7] = {
669a5db4
JG
161 { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01, 0xFF }, /* 100MHz */
162 { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }, /* 133Mhz */
163 };
9b8ad4ac 164 static const u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 };
669a5db4
JG
165
166 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
167 unsigned long ma = sil680_seldev(ap, adev, 0x08);
168 unsigned long ua = sil680_seldev(ap, adev, 0x0C);
169 unsigned long addr_mask = 0x80 + 4 * ap->port_no;
170 int port_shift = adev->devno * 4;
171 u8 scsc, mode;
172 u16 multi, ultra;
173
174 pci_read_config_byte(pdev, 0x8A, &scsc);
175 pci_read_config_byte(pdev, addr_mask, &mode);
176 pci_read_config_word(pdev, ma, &multi);
177 pci_read_config_word(pdev, ua, &ultra);
178
179 /* Mask timing bits */
180 ultra &= ~0x3F;
181 mode &= ~(0x03 << port_shift);
182
183 /* Extract scsc */
7a113d38 184 scsc = (scsc & 0x30) ? 1 : 0;
669a5db4
JG
185
186 if (adev->dma_mode >= XFER_UDMA_0) {
187 multi = 0x10C1;
188 ultra |= ultra_table[scsc][adev->dma_mode - XFER_UDMA_0];
189 mode |= (0x03 << port_shift);
190 } else {
191 multi = dma_table[adev->dma_mode - XFER_MW_DMA_0];
192 mode |= (0x02 << port_shift);
193 }
194 pci_write_config_byte(pdev, addr_mask, mode);
195 pci_write_config_word(pdev, ma, multi);
196 pci_write_config_word(pdev, ua, ultra);
197}
198
c4acf99b
AC
199/**
200 * sil680_sff_exec_command - issue ATA command to host controller
201 * @ap: port to which command is being issued
202 * @tf: ATA taskfile register set
203 *
204 * Issues ATA command, with proper synchronization with interrupt
205 * handler / other threads. Use our MMIO space for PCI posting to avoid
206 * a hideously slow cycle all the way to the device.
207 *
208 * LOCKING:
209 * spin_lock_irqsave(host lock)
210 */
ada5b12e
SS
211static void sil680_sff_exec_command(struct ata_port *ap,
212 const struct ata_taskfile *tf)
c4acf99b
AC
213{
214 DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
215 iowrite8(tf->command, ap->ioaddr.command_addr);
216 ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
217}
218
9b980e10
SS
219static bool sil680_sff_irq_check(struct ata_port *ap)
220{
221 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
222 unsigned long addr = sil680_selreg(ap, 1);
223 u8 val;
224
225 pci_read_config_byte(pdev, addr, &val);
226
227 return val & 0x08;
228}
229
669a5db4 230static struct scsi_host_template sil680_sht = {
68d1d07b 231 ATA_BMDMA_SHT(DRV_NAME),
669a5db4
JG
232};
233
c4acf99b 234
669a5db4 235static struct ata_port_operations sil680_port_ops = {
c4acf99b
AC
236 .inherits = &ata_bmdma32_port_ops,
237 .sff_exec_command = sil680_sff_exec_command,
9b980e10 238 .sff_irq_check = sil680_sff_irq_check,
c4acf99b
AC
239 .cable_detect = sil680_cable_detect,
240 .set_piomode = sil680_set_piomode,
241 .set_dmamode = sil680_set_dmamode,
669a5db4
JG
242};
243
8550c163
A
244/**
245 * sil680_init_chip - chip setup
246 * @pdev: PCI device
247 *
248 * Perform all the chip setup which must be done both when the device
249 * is powered up on boot and when we resume in case we resumed from RAM.
250 * Returns the final clock settings.
251 */
f20b16ff 252
2b9e68f7 253static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
669a5db4 254{
669a5db4
JG
255 u8 tmpbyte = 0;
256
7a113d38 257 /* FIXME: double check */
89d3b360
SS
258 pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE,
259 pdev->revision ? 1 : 255);
669a5db4
JG
260
261 pci_write_config_byte(pdev, 0x80, 0x00);
262 pci_write_config_byte(pdev, 0x84, 0x00);
263
264 pci_read_config_byte(pdev, 0x8A, &tmpbyte);
265
79b0bde1
JG
266 dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n",
267 tmpbyte & 1, tmpbyte & 0x30);
669a5db4 268
0f436eff 269 *try_mmio = 0;
47d692a9 270#ifdef CONFIG_PPC
0f436eff
BH
271 if (machine_is(cell))
272 *try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
273#endif
2b9e68f7 274
7a113d38
BZ
275 switch (tmpbyte & 0x30) {
276 case 0x00:
277 /* 133 clock attempt to force it on */
278 pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10);
279 break;
280 case 0x30:
281 /* if clocking is disabled */
282 /* 133 clock attempt to force it on */
283 pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20);
284 break;
285 case 0x10:
286 /* 133 already */
287 break;
288 case 0x20:
289 /* BIOS set PCI x2 clocking */
290 break;
669a5db4
JG
291 }
292
293 pci_read_config_byte(pdev, 0x8A, &tmpbyte);
79b0bde1
JG
294 dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n",
295 tmpbyte & 1, tmpbyte & 0x30);
669a5db4
JG
296
297 pci_write_config_byte(pdev, 0xA1, 0x72);
298 pci_write_config_word(pdev, 0xA2, 0x328A);
299 pci_write_config_dword(pdev, 0xA4, 0x62DD62DD);
300 pci_write_config_dword(pdev, 0xA8, 0x43924392);
301 pci_write_config_dword(pdev, 0xAC, 0x40094009);
302 pci_write_config_byte(pdev, 0xB1, 0x72);
303 pci_write_config_word(pdev, 0xB2, 0x328A);
304 pci_write_config_dword(pdev, 0xB4, 0x62DD62DD);
305 pci_write_config_dword(pdev, 0xB8, 0x43924392);
306 pci_write_config_dword(pdev, 0xBC, 0x40094009);
307
7a113d38
BZ
308 switch (tmpbyte & 0x30) {
309 case 0x00:
310 printk(KERN_INFO "sil680: 100MHz clock.\n");
311 break;
312 case 0x10:
313 printk(KERN_INFO "sil680: 133MHz clock.\n");
314 break;
315 case 0x20:
316 printk(KERN_INFO "sil680: Using PCI clock.\n");
317 break;
318 /* This last case is _NOT_ ok */
319 case 0x30:
320 printk(KERN_ERR "sil680: Clock disabled ?\n");
8550c163
A
321 }
322 return tmpbyte & 0x30;
323}
324
0ec24914 325static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
8550c163 326{
1626aeb8 327 static const struct ata_port_info info = {
1d2808fd 328 .flags = ATA_FLAG_SLAVE_POSS,
14bdef98
EIB
329 .pio_mask = ATA_PIO4,
330 .mwdma_mask = ATA_MWDMA2,
bf6263a8 331 .udma_mask = ATA_UDMA6,
8550c163
A
332 .port_ops = &sil680_port_ops
333 };
1626aeb8 334 static const struct ata_port_info info_slow = {
1d2808fd 335 .flags = ATA_FLAG_SLAVE_POSS,
14bdef98
EIB
336 .pio_mask = ATA_PIO4,
337 .mwdma_mask = ATA_MWDMA2,
bf6263a8 338 .udma_mask = ATA_UDMA5,
8550c163
A
339 .port_ops = &sil680_port_ops
340 };
1626aeb8 341 const struct ata_port_info *ppi[] = { &info, NULL };
2b9e68f7
BH
342 struct ata_host *host;
343 void __iomem *mmio_base;
344 int rc, try_mmio;
8550c163 345
06296a1e 346 ata_print_version_once(&pdev->dev, DRV_VERSION);
8550c163 347
f08048e9
TH
348 rc = pcim_enable_device(pdev);
349 if (rc)
350 return rc;
351
2b9e68f7 352 switch (sil680_init_chip(pdev, &try_mmio)) {
8550c163 353 case 0:
1626aeb8 354 ppi[0] = &info_slow;
8550c163
A
355 break;
356 case 0x30:
357 return -ENODEV;
669a5db4 358 }
2b9e68f7
BH
359
360 if (!try_mmio)
361 goto use_ioports;
362
363 /* Try to acquire MMIO resources and fallback to PIO if
364 * that fails
365 */
2b9e68f7
BH
366 rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME);
367 if (rc)
368 goto use_ioports;
369
370 /* Allocate host and set it up */
371 host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
372 if (!host)
373 return -ENOMEM;
374 host->iomap = pcim_iomap_table(pdev);
375
376 /* Setup DMA masks */
c54c719b 377 rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
2b9e68f7
BH
378 if (rc)
379 return rc;
c54c719b 380 rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
2b9e68f7
BH
381 if (rc)
382 return rc;
383 pci_set_master(pdev);
384
385 /* Get MMIO base and initialize port addresses */
386 mmio_base = host->iomap[SIL680_MMIO_BAR];
387 host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x00;
388 host->ports[0]->ioaddr.cmd_addr = mmio_base + 0x80;
389 host->ports[0]->ioaddr.ctl_addr = mmio_base + 0x8a;
390 host->ports[0]->ioaddr.altstatus_addr = mmio_base + 0x8a;
9363c382 391 ata_sff_std_ports(&host->ports[0]->ioaddr);
2b9e68f7
BH
392 host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x08;
393 host->ports[1]->ioaddr.cmd_addr = mmio_base + 0xc0;
394 host->ports[1]->ioaddr.ctl_addr = mmio_base + 0xca;
395 host->ports[1]->ioaddr.altstatus_addr = mmio_base + 0xca;
9363c382 396 ata_sff_std_ports(&host->ports[1]->ioaddr);
2b9e68f7
BH
397
398 /* Register & activate */
c3b28894 399 return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
9363c382 400 IRQF_SHARED, &sil680_sht);
2b9e68f7
BH
401
402use_ioports:
1c5afdf7 403 return ata_pci_bmdma_init_one(pdev, ppi, &sil680_sht, NULL, 0);
669a5db4
JG
404}
405
58eb8cd5 406#ifdef CONFIG_PM_SLEEP
8550c163
A
407static int sil680_reinit_one(struct pci_dev *pdev)
408{
0a86e1c8 409 struct ata_host *host = pci_get_drvdata(pdev);
f08048e9 410 int try_mmio, rc;
2b9e68f7 411
f08048e9
TH
412 rc = ata_pci_device_do_resume(pdev);
413 if (rc)
414 return rc;
2b9e68f7 415 sil680_init_chip(pdev, &try_mmio);
f08048e9
TH
416 ata_host_resume(host);
417 return 0;
8550c163 418}
438ac6d5 419#endif
8550c163 420
669a5db4 421static const struct pci_device_id sil680[] = {
2d2744fc
JG
422 { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680), },
423
424 { },
669a5db4
JG
425};
426
427static struct pci_driver sil680_pci_driver = {
2d2744fc 428 .name = DRV_NAME,
669a5db4
JG
429 .id_table = sil680,
430 .probe = sil680_init_one,
8550c163 431 .remove = ata_pci_remove_one,
58eb8cd5 432#ifdef CONFIG_PM_SLEEP
8550c163
A
433 .suspend = ata_pci_device_suspend,
434 .resume = sil680_reinit_one,
438ac6d5 435#endif
669a5db4
JG
436};
437
2fc75da0 438module_pci_driver(sil680_pci_driver);
669a5db4 439
669a5db4
JG
440MODULE_AUTHOR("Alan Cox");
441MODULE_DESCRIPTION("low-level driver for SI680 PATA");
442MODULE_LICENSE("GPL");
443MODULE_DEVICE_TABLE(pci, sil680);
444MODULE_VERSION(DRV_VERSION);