MIPS: Remove FIR from ISA I FP signal context

[linux-2.6-block.git] / arch / mips / kernel / r2300_fpu.S

/*
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 1996, 1998 by Ralf Baechle
 *
 * Multi-arch abstraction and asm macros for easier reading:
 * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
 *
 * Further modifications to make this work:
 * Copyright (c) 1998 Harald Koerfgen
 */
#include <asm/asm.h>
#include <asm/errno.h>
#include <asm/fpregdef.h>
#include <asm/mipsregs.h>
#include <asm/asm-offsets.h>
#include <asm/regdef.h>

#define EX(a,b)							\
9:	a,##b;							\
	.section __ex_table,"a";				\
	PTR	9b,fault;					\
	.previous

	.set	noreorder
	.set	mips1
	/* Save floating point context */
LEAF(_save_fp_context)
	.set	push
	SET_HARDFLOAT
	li	v0, 0					# assume success
	cfc1	t1,fcr31
	EX(swc1 $f0,(SC_FPREGS+0)(a0))
	EX(swc1 $f1,(SC_FPREGS+8)(a0))
	EX(swc1 $f2,(SC_FPREGS+16)(a0))
	EX(swc1 $f3,(SC_FPREGS+24)(a0))
	EX(swc1 $f4,(SC_FPREGS+32)(a0))
	EX(swc1 $f5,(SC_FPREGS+40)(a0))
	EX(swc1 $f6,(SC_FPREGS+48)(a0))
	EX(swc1 $f7,(SC_FPREGS+56)(a0))
	EX(swc1 $f8,(SC_FPREGS+64)(a0))
	EX(swc1 $f9,(SC_FPREGS+72)(a0))
	EX(swc1 $f10,(SC_FPREGS+80)(a0))
	EX(swc1 $f11,(SC_FPREGS+88)(a0))
	EX(swc1 $f12,(SC_FPREGS+96)(a0))
	EX(swc1 $f13,(SC_FPREGS+104)(a0))
	EX(swc1 $f14,(SC_FPREGS+112)(a0))
	EX(swc1 $f15,(SC_FPREGS+120)(a0))
	EX(swc1 $f16,(SC_FPREGS+128)(a0))
	EX(swc1 $f17,(SC_FPREGS+136)(a0))
	EX(swc1 $f18,(SC_FPREGS+144)(a0))
	EX(swc1 $f19,(SC_FPREGS+152)(a0))
	EX(swc1 $f20,(SC_FPREGS+160)(a0))
	EX(swc1 $f21,(SC_FPREGS+168)(a0))
	EX(swc1 $f22,(SC_FPREGS+176)(a0))
	EX(swc1 $f23,(SC_FPREGS+184)(a0))
	EX(swc1 $f24,(SC_FPREGS+192)(a0))
	EX(swc1 $f25,(SC_FPREGS+200)(a0))
	EX(swc1 $f26,(SC_FPREGS+208)(a0))
	EX(swc1 $f27,(SC_FPREGS+216)(a0))
	EX(swc1 $f28,(SC_FPREGS+224)(a0))
	EX(swc1 $f29,(SC_FPREGS+232)(a0))
	EX(swc1 $f30,(SC_FPREGS+240)(a0))
	EX(swc1 $f31,(SC_FPREGS+248)(a0))
	jr	ra
	 EX(sw	t1,(SC_FPC_CSR)(a0))
	.set	pop
	END(_save_fp_context)

/*
 * Restore FPU state:
 *  - fp gp registers
 *  - cp1 status/control register
 *
 * We base the decision which registers to restore from the signal stack
 * frame on the current content of c0_status, not on the content of the
 * stack frame which might have been changed by the user.
 */
LEAF(_restore_fp_context)
	.set	push
	SET_HARDFLOAT
	li	v0, 0					# assume success
	EX(lw t0,(SC_FPC_CSR)(a0))
	EX(lwc1 $f0,(SC_FPREGS+0)(a0))
	EX(lwc1 $f1,(SC_FPREGS+8)(a0))
	EX(lwc1 $f2,(SC_FPREGS+16)(a0))
	EX(lwc1 $f3,(SC_FPREGS+24)(a0))
	EX(lwc1 $f4,(SC_FPREGS+32)(a0))
	EX(lwc1 $f5,(SC_FPREGS+40)(a0))
	EX(lwc1 $f6,(SC_FPREGS+48)(a0))
	EX(lwc1 $f7,(SC_FPREGS+56)(a0))
	EX(lwc1 $f8,(SC_FPREGS+64)(a0))
	EX(lwc1 $f9,(SC_FPREGS+72)(a0))
	EX(lwc1 $f10,(SC_FPREGS+80)(a0))
	EX(lwc1 $f11,(SC_FPREGS+88)(a0))
	EX(lwc1 $f12,(SC_FPREGS+96)(a0))
	EX(lwc1 $f13,(SC_FPREGS+104)(a0))
	EX(lwc1 $f14,(SC_FPREGS+112)(a0))
	EX(lwc1 $f15,(SC_FPREGS+120)(a0))
	EX(lwc1 $f16,(SC_FPREGS+128)(a0))
	EX(lwc1 $f17,(SC_FPREGS+136)(a0))
	EX(lwc1 $f18,(SC_FPREGS+144)(a0))
	EX(lwc1 $f19,(SC_FPREGS+152)(a0))
	EX(lwc1 $f20,(SC_FPREGS+160)(a0))
	EX(lwc1 $f21,(SC_FPREGS+168)(a0))
	EX(lwc1 $f22,(SC_FPREGS+176)(a0))
	EX(lwc1 $f23,(SC_FPREGS+184)(a0))
	EX(lwc1 $f24,(SC_FPREGS+192)(a0))
	EX(lwc1 $f25,(SC_FPREGS+200)(a0))
	EX(lwc1 $f26,(SC_FPREGS+208)(a0))
	EX(lwc1 $f27,(SC_FPREGS+216)(a0))
	EX(lwc1 $f28,(SC_FPREGS+224)(a0))
	EX(lwc1 $f29,(SC_FPREGS+232)(a0))
	EX(lwc1 $f30,(SC_FPREGS+240)(a0))
	EX(lwc1 $f31,(SC_FPREGS+248)(a0))
	jr	ra
	 ctc1	t0,fcr31
	.set	pop
	END(_restore_fp_context)
	.set	reorder

	.type	fault, @function
	.ent	fault
fault:	li	v0, -EFAULT
	jr	ra
	.end	fault