Commit | Line | Data |
---|---|---|
e4c7d009 FF |
1 | / { |
2 | #address-cells = <1>; | |
3 | #size-cells = <1>; | |
4 | compatible = "brcm,bcm7435"; | |
5 | ||
6 | cpus { | |
7 | #address-cells = <1>; | |
8 | #size-cells = <0>; | |
9 | ||
10 | mips-hpt-frequency = <163125000>; | |
11 | ||
12 | cpu@0 { | |
13 | compatible = "brcm,bmips5200"; | |
14 | device_type = "cpu"; | |
15 | reg = <0>; | |
16 | }; | |
17 | ||
18 | cpu@1 { | |
19 | compatible = "brcm,bmips5200"; | |
20 | device_type = "cpu"; | |
21 | reg = <1>; | |
22 | }; | |
23 | ||
24 | cpu@2 { | |
25 | compatible = "brcm,bmips5200"; | |
26 | device_type = "cpu"; | |
27 | reg = <2>; | |
28 | }; | |
29 | ||
30 | cpu@3 { | |
31 | compatible = "brcm,bmips5200"; | |
32 | device_type = "cpu"; | |
33 | reg = <3>; | |
34 | }; | |
35 | }; | |
36 | ||
37 | aliases { | |
38 | uart0 = &uart0; | |
39 | }; | |
40 | ||
41 | cpu_intc: cpu_intc { | |
42 | #address-cells = <0>; | |
43 | compatible = "mti,cpu-interrupt-controller"; | |
44 | ||
45 | interrupt-controller; | |
46 | #interrupt-cells = <1>; | |
47 | }; | |
48 | ||
49 | clocks { | |
50 | uart_clk: uart_clk { | |
51 | compatible = "fixed-clock"; | |
52 | #clock-cells = <0>; | |
53 | clock-frequency = <81000000>; | |
54 | }; | |
55 | }; | |
56 | ||
57 | rdb { | |
58 | #address-cells = <1>; | |
59 | #size-cells = <1>; | |
60 | ||
61 | compatible = "simple-bus"; | |
62 | ranges = <0 0x10000000 0x01000000>; | |
63 | ||
64 | periph_intc: periph_intc@41b500 { | |
65 | compatible = "brcm,bcm7038-l1-intc"; | |
66 | reg = <0x41b500 0x40>, <0x41b600 0x40>; | |
67 | ||
68 | interrupt-controller; | |
69 | #interrupt-cells = <1>; | |
70 | ||
71 | interrupt-parent = <&cpu_intc>; | |
72 | interrupts = <2>, <3>; | |
73 | }; | |
74 | ||
75 | sun_l2_intc: sun_l2_intc@403000 { | |
76 | compatible = "brcm,l2-intc"; | |
77 | reg = <0x403000 0x30>; | |
78 | interrupt-controller; | |
79 | #interrupt-cells = <1>; | |
80 | interrupt-parent = <&periph_intc>; | |
81 | interrupts = <52>; | |
82 | }; | |
83 | ||
84 | gisb-arb@400000 { | |
85 | compatible = "brcm,bcm7400-gisb-arb"; | |
86 | reg = <0x400000 0xdc>; | |
87 | native-endian; | |
88 | interrupt-parent = <&sun_l2_intc>; | |
89 | interrupts = <0>, <2>; | |
90 | brcm,gisb-arb-master-mask = <0xf77f>; | |
91 | brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "webcpu_0", | |
92 | "pcie_0", "bsp_0", | |
93 | "rdc_0", "raaga_0", | |
94 | "avd_1", "jtag_0", | |
95 | "svd_0", "vice_0", | |
96 | "vice_1", "raaga_1", | |
97 | "scpu"; | |
98 | }; | |
99 | ||
100 | upg_irq0_intc: upg_irq0_intc@406780 { | |
101 | compatible = "brcm,bcm7120-l2-intc"; | |
102 | reg = <0x406780 0x8>; | |
103 | ||
104 | brcm,int-map-mask = <0x44>; | |
105 | brcm,int-fwd-mask = <0x70000>; | |
106 | ||
107 | interrupt-controller; | |
108 | #interrupt-cells = <1>; | |
109 | ||
110 | interrupt-parent = <&periph_intc>; | |
111 | interrupts = <60>; | |
112 | }; | |
113 | ||
114 | sun_top_ctrl: syscon@404000 { | |
115 | compatible = "brcm,bcm7425-sun-top-ctrl", "syscon"; | |
116 | reg = <0x404000 0x51c>; | |
e4c7d009 FF |
117 | }; |
118 | ||
119 | reboot { | |
120 | compatible = "brcm,brcmstb-reboot"; | |
121 | syscon = <&sun_top_ctrl 0x304 0x308>; | |
122 | }; | |
123 | ||
124 | uart0: serial@406b00 { | |
125 | compatible = "ns16550a"; | |
126 | reg = <0x406b00 0x20>; | |
127 | reg-io-width = <0x4>; | |
128 | reg-shift = <0x2>; | |
129 | interrupt-parent = <&periph_intc>; | |
130 | interrupts = <66>; | |
131 | clocks = <&uart_clk>; | |
132 | status = "disabled"; | |
133 | }; | |
134 | ||
135 | enet0: ethernet@b80000 { | |
136 | phy-mode = "internal"; | |
137 | phy-handle = <&phy1>; | |
138 | mac-address = [ 00 10 18 36 23 1a ]; | |
139 | compatible = "brcm,genet-v3"; | |
140 | #address-cells = <0x1>; | |
141 | #size-cells = <0x1>; | |
142 | reg = <0xb80000 0x11c88>; | |
143 | interrupts = <17>, <18>; | |
144 | interrupt-parent = <&periph_intc>; | |
145 | status = "disabled"; | |
146 | ||
147 | mdio@e14 { | |
148 | compatible = "brcm,genet-mdio-v3"; | |
149 | #address-cells = <0x1>; | |
150 | #size-cells = <0x0>; | |
151 | reg = <0xe14 0x8>; | |
152 | ||
153 | phy1: ethernet-phy@1 { | |
154 | max-speed = <100>; | |
155 | reg = <0x1>; | |
156 | compatible = "brcm,40nm-ephy", | |
157 | "ethernet-phy-ieee802.3-c22"; | |
158 | }; | |
159 | }; | |
160 | }; | |
161 | ||
162 | ehci0: usb@480300 { | |
163 | compatible = "brcm,bcm7435-ehci", "generic-ehci"; | |
164 | reg = <0x480300 0x100>; | |
165 | native-endian; | |
166 | interrupt-parent = <&periph_intc>; | |
167 | interrupts = <70>; | |
168 | status = "disabled"; | |
169 | }; | |
170 | ||
171 | ohci0: usb@480400 { | |
172 | compatible = "brcm,bcm7435-ohci", "generic-ohci"; | |
173 | reg = <0x480400 0x100>; | |
174 | native-endian; | |
175 | no-big-frame-no; | |
176 | interrupt-parent = <&periph_intc>; | |
177 | interrupts = <72>; | |
178 | status = "disabled"; | |
179 | }; | |
180 | ||
181 | ehci1: usb@480500 { | |
182 | compatible = "brcm,bcm7435-ehci", "generic-ehci"; | |
183 | reg = <0x480500 0x100>; | |
184 | native-endian; | |
185 | interrupt-parent = <&periph_intc>; | |
186 | interrupts = <71>; | |
187 | status = "disabled"; | |
188 | }; | |
189 | ||
190 | ohci1: usb@480600 { | |
191 | compatible = "brcm,bcm7435-ohci", "generic-ohci"; | |
192 | reg = <0x480600 0x100>; | |
193 | native-endian; | |
194 | no-big-frame-no; | |
195 | interrupt-parent = <&periph_intc>; | |
196 | interrupts = <73>; | |
197 | status = "disabled"; | |
198 | }; | |
199 | ||
200 | ehci2: usb@490300 { | |
201 | compatible = "brcm,bcm7435-ehci", "generic-ehci"; | |
202 | reg = <0x490300 0x100>; | |
203 | native-endian; | |
204 | interrupt-parent = <&periph_intc>; | |
205 | interrupts = <75>; | |
206 | status = "disabled"; | |
207 | }; | |
208 | ||
209 | ohci2: usb@490400 { | |
210 | compatible = "brcm,bcm7435-ohci", "generic-ohci"; | |
211 | reg = <0x490400 0x100>; | |
212 | native-endian; | |
213 | no-big-frame-no; | |
214 | interrupt-parent = <&periph_intc>; | |
215 | interrupts = <77>; | |
216 | status = "disabled"; | |
217 | }; | |
218 | ||
219 | ehci3: usb@490500 { | |
220 | compatible = "brcm,bcm7435-ehci", "generic-ehci"; | |
221 | reg = <0x490500 0x100>; | |
222 | native-endian; | |
223 | interrupt-parent = <&periph_intc>; | |
224 | interrupts = <76>; | |
225 | status = "disabled"; | |
226 | }; | |
227 | ||
228 | ohci3: usb@490600 { | |
229 | compatible = "brcm,bcm7435-ohci", "generic-ohci"; | |
230 | reg = <0x490600 0x100>; | |
231 | native-endian; | |
232 | no-big-frame-no; | |
233 | interrupt-parent = <&periph_intc>; | |
234 | interrupts = <78>; | |
235 | status = "disabled"; | |
236 | }; | |
237 | }; | |
238 | }; |