[linux-2.6-block.git] / arch / arm / boot / dts / ste-snowball.dts

/*
 * Copyright 2011 ST-Ericsson AB
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

/dts-v1/;
#include "ste-dbx5x0.dtsi"
#include "ste-href-ab8500.dtsi"
#include "ste-href-family-pinctrl.dtsi"

/ {
	model = "Calao Systems Snowball platform with device tree";
	compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";

	/* This stablilizes the serial port enumeration */
	aliases {
		serial0 = &ux500_serial0;
		serial1 = &ux500_serial1;
		serial2 = &ux500_serial2;
	};

	memory {
		reg = <0x00000000 0x20000000>;
	};

	en_3v3_reg: en_3v3 {
		compatible = "regulator-fixed";
		regulator-name = "en-3v3-fixed-supply";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		/* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */
		gpio = <&ab8500_gpio 25 0x4>;
		startup-delay-us = <5000>;
		enable-active-high;
	};

	gpio_keys {
		compatible = "gpio-keys";
		#address-cells = <1>;
		#size-cells = <0>;

		button@1 {
			debounce-interval = <50>;
			wakeup-source;
			linux,code = <2>;
			label = "userpb";
			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
		};
		button@2 {
			debounce-interval = <50>;
			wakeup-source;
			linux,code = <3>;
			label = "extkb1";
			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
		};
		button@3 {
			debounce-interval = <50>;
			wakeup-source;
			linux,code = <4>;
			label = "extkb2";
			gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
		};
		button@4 {
			debounce-interval = <50>;
			wakeup-source;
			linux,code = <5>;
			label = "extkb3";
			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
		};
		button@5 {
			debounce-interval = <50>;
			wakeup-source;
			linux,code = <6>;
			label = "extkb4";
			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
		};
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&gpioled_snowball_mode>;
		used-led {
			label = "user_led";
			gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
			default-state = "on";
			linux,default-trigger = "heartbeat";
		};
	};

	soc {
		/* Name the GPIO muxed rails on the Snowball board */
		gpio@8012e000 {
			/* GPIOs 0 - 31 */
			gpio-line-names = "", "", "", "", "", "", "", "",
				     "", "", "", "", "", "", "", "",
				     "", "", "", "", "", "", "", "",
				     "", "", "", "", "", "", "",
				     "AP_GPIO31";
		};

		gpio@8012e080 {
			/* GPIOs 32 - 63 */
			gpio-line-names = "USR PB", "", "", "", "", "", "", "",
				     "", "", "", "", "", "", "", "",
				     "", "", "", "", "", "", "", "",
				     "", "", "", "", "", "", "", "";
		};

		gpio@8000e000 {
			/* GPIOs 64 - 95 */
			gpio-line-names = "", "", "", "", "AP_GPIO68", "", "", "",
				     "", "", "", "", "", "", "", "",
				     "", "", "", "", "", "", "", "",
				     "", "", "", "", "", "", "", "";
		};

		gpio@8000e100 {
			/* GPIOs 128 - 159 */
			gpio-line-names = "", "", "", "", "", "", "", "",
				     "", "", "", "", "IRQ_LAN", "RSTn_LAN",
				     "USR_LED", "", "", "", "", "", "",
				     "", "", "AP_GPIO151", "AP_GPIO152",
				     "", "", "", "", "", "", "";
		};

		gpio@8000e180 {
			/* GPIOs 160 - 191 */
			gpio-line-names = "", "AP_GPIO161", "AP_GPIO162",
				     "ACCELEROMETER_INT1_RDY",
				     "ACCELEROMETER_INT2", "MAG_DRDY",
				     "GYRO_DRDY", "RSTn_MLC", "RSTn_SLC",
				     "GYRO_INT", "UART_WAKE", "GBF_RESET",
				     "", "", "", "",
				     "", "", "", "", "", "", "", "",
				     "", "", "", "", "", "", "", "";
		};

		gpio@8011e000 {
			/* GPIOs 192 - 223 */
			gpio-line-names = "HDTV_INTn", "", "", "", "HDTV_RST",
				     "", "", "", "", "", "", "", "", "",
				     "", "", "", "", "", "", "", "", "",
				     "WLAN_RESETN", "WLAN_IRQ", "MMC_EN",
				     "MMC_CD", "", "", "", "", "";
		};

		gpio@8011e080 {
			/* GPIOs 224 - 255 */
			gpio-line-names = "", "", "", "", "SD_SEL", "", "", "",
				     "", "", "", "", "", "", "", "",
				     "", "", "", "", "", "", "", "",
				     "", "", "", "", "", "", "", "";
		};

		msp0: msp@80123000 {
			pinctrl-names = "default";
			pinctrl-0 = <&msp0_default_mode>;
			status = "okay";
		};

		msp1: msp@80124000 {
			pinctrl-names = "default";
			pinctrl-0 = <&msp1_default_mode>;
			status = "okay";
		};

		msp2: msp@80117000 {
			pinctrl-names = "default";
			pinctrl-0 = <&msp2_default_mode>;
		};

		msp3: msp@80125000 {
			status = "okay";
		};

		external-bus@50000000 {
			status = "okay";

			ethernet@0 {
				compatible = "smsc,lan9115";
				reg = <0 0x10000>;
				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
				interrupt-parent = <&gpio4>;
				vdd33a-supply = <&en_3v3_reg>;
				vddvario-supply = <&db8500_vape_reg>;
				pinctrl-names = "default";
				pinctrl-0 = <&eth_snowball_mode>;

				reg-shift = <1>;
				reg-io-width = <2>;
				smsc,force-internal-phy;
				smsc,irq-active-high;
				smsc,irq-push-pull;

				clocks = <&prcc_pclk 3 0>;
			};
		};

		/* ST6G3244ME level translator for 1.8/2.9 V */
		vmmci: regulator-gpio {
			compatible = "regulator-gpio";

			/* GPIO228 SD_SEL */
			gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
			/* GPIO217 MMC_EN */
			enable-gpio = <&gpio6 25 GPIO_ACTIVE_HIGH>;
			enable-active-high;

			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <2900000>;
			regulator-name = "mmci-reg";
			regulator-type = "voltage";

			startup-delay-us = <100>;

			states = <1800000 0x1
				  2900000 0x0>;
		};

		// External Micro SD slot
		sdi0_per1@80126000 {
			arm,primecell-periphid = <0x10480180>;
			max-frequency = <100000000>;
			bus-width = <4>;
			cap-sd-highspeed;
			cap-mmc-highspeed;
			sd-uhs-sdr12;
			sd-uhs-sdr25;
			/* All direction control is used */
			st,sig-dir-cmd;
			st,sig-dir-dat0;
			st,sig-dir-dat2;
			st,sig-dir-dat31;
			st,sig-pin-fbclk;
			full-pwr-cycle;
			vmmc-supply = <&ab8500_ldo_aux3_reg>;
			vqmmc-supply = <&vmmci>;
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&sdi0_default_mode>;
			pinctrl-1 = <&sdi0_sleep_mode>;

			/* GPIO218 MMC_CD */
			cd-gpios  = <&gpio6 26 GPIO_ACTIVE_LOW>;

			status = "okay";
		};

		// WLAN SDIO channel
		sdi1_per2@80118000 {
			arm,primecell-periphid = <0x10480180>;
			max-frequency = <100000000>;
			bus-width = <4>;
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&sdi1_default_mode>;
			pinctrl-1 = <&sdi1_sleep_mode>;

			status = "okay";
		};

		// Unused PoP eMMC - register and put it to sleep by default */
		sdi2_per3@80005000 {
			arm,primecell-periphid = <0x10480180>;
			pinctrl-names = "default";
			pinctrl-0 = <&sdi2_sleep_mode>;

			status = "okay";
		};

		// On-board eMMC
		sdi4_per2@80114000 {
			arm,primecell-periphid = <0x10480180>;
		        max-frequency = <100000000>;
			bus-width = <8>;
			cap-mmc-highspeed;
			vmmc-supply = <&ab8500_ldo_aux2_reg>;
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&sdi4_default_mode>;
			pinctrl-1 = <&sdi4_sleep_mode>;

			status = "okay";
		};

		uart@80120000 {
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&uart0_default_mode>;
			pinctrl-1 = <&uart0_sleep_mode>;
			status = "okay";
		};

		/* This UART is unused and thus left disabled */
		uart@80121000 {
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&uart1_default_mode>;
			pinctrl-1 = <&uart1_sleep_mode>;
		};

		uart@80007000 {
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&uart2_default_mode>;
			pinctrl-1 = <&uart2_sleep_mode>;
			status = "okay";
		};

		i2c@80004000 {
			pinctrl-names = "default","sleep";
			pinctrl-0 = <&i2c0_default_mode>;
			pinctrl-1 = <&i2c0_sleep_mode>;
		};

		i2c@80122000 {
			pinctrl-names = "default","sleep";
			pinctrl-0 = <&i2c1_default_mode>;
			pinctrl-1 = <&i2c1_sleep_mode>;
		};

		i2c@80128000 {
			pinctrl-names = "default","sleep";
			pinctrl-0 = <&i2c2_default_mode>;
			pinctrl-1 = <&i2c2_sleep_mode>;
			lsm303dlh@18 {
				/* Accelerometer */
				compatible = "st,lsm303dlh-accel";
				st,drdy-int-pin = <1>;
				reg = <0x18>;
				vdd-supply = <&ab8500_ldo_aux1_reg>;
				vddio-supply = <&db8500_vsmps2_reg>;
				pinctrl-names = "default";
				pinctrl-0 = <&accel_snowball_mode>;
				interrupt-parent = <&gpio5>;
				interrupts = <3 IRQ_TYPE_EDGE_RISING>, /* INT1 */
					     <4 IRQ_TYPE_EDGE_RISING>; /* INT2 */
			};
			lsm303dlh@1e {
				/* Magnetometer */
				compatible = "st,lsm303dlh-magn";
				reg = <0x1e>;
				vdd-supply = <&ab8500_ldo_aux1_reg>;
				vddio-supply = <&db8500_vsmps2_reg>;
				pinctrl-names = "default";
				pinctrl-0 = <&magneto_snowball_mode>;
				interrupt-parent = <&gpio5>;
				interrupts = <5 IRQ_TYPE_EDGE_RISING>; /* DRDY line */
			};
			l3g4200d@68 {
				/* Gyroscope */
				compatible = "st,l3g4200d-gyro";
				st,drdy-int-pin = <2>;
				reg = <0x68>;
				vdd-supply = <&ab8500_ldo_aux1_reg>;
				vddio-supply = <&db8500_vsmps2_reg>;
				pinctrl-names = "default";
				pinctrl-0 = <&gyro_snowball_mode>;
				interrupt-parent = <&gpio5>;
				interrupts = <6 IRQ_TYPE_EDGE_RISING>, /* DRDY line */
					     <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
			};
			lsp001wm@5c {
				/* Barometer/pressure sensor */
				compatible = "st,lps001wp-press";
				reg = <0x5c>;
				vdd-supply = <&ab8500_ldo_aux1_reg>;
				vddio-supply = <&db8500_vsmps2_reg>;
			};
		};

		i2c@80110000 {
			pinctrl-names = "default","sleep";
			pinctrl-0 = <&i2c3_default_mode>;
			pinctrl-1 = <&i2c3_sleep_mode>;
		};

		ssp@80002000 {
			pinctrl-names = "default";
			pinctrl-0 = <&ssp0_snowball_mode>;
		};

		cpufreq-cooling {
			status = "okay";
		};

		prcmu@80157000 {
			cpufreq {
				status = "okay";
			};

			thermal@801573c0 {
				num-trips = <4>;

				trip0-temp = <70000>;
				trip0-type = "active";
				trip0-cdev-num = <1>;
				trip0-cdev-name0 = "thermal-cpufreq-0";

				trip1-temp = <75000>;
				trip1-type = "active";
				trip1-cdev-num = <1>;
				trip1-cdev-name0 = "thermal-cpufreq-0";

				trip2-temp = <80000>;
				trip2-type = "active";
				trip2-cdev-num = <1>;
				trip2-cdev-name0 = "thermal-cpufreq-0";

				trip3-temp = <85000>;
				trip3-type = "critical";
				trip3-cdev-num = <0>;

				status = "okay";
			};

			ab8500 {
				ab8500-gpio {
					/*
					 * AB8500 GPIOs are numbered starting from 1, so the first
					 * index 0 is what in the datasheet is called "GPIO1", and
					 * the second is "GPIO2" and so forth. Confusingly, the
					 * Snowball schematic then names the "GPIO2" line "PM_GPIO1".
					 * while later naming "GPIO4" as "PM_GPIO4".
					 */
					gpio-line-names = "", /* AB8500 GPIO1 */
						     "PM_GPIO1", /* AB8500 GPIO2 */
						     "WLAN_CLK_REQ", /* AB8500 GPIO3 */
						     "PM_GPIO4", /* AB8500 GPIO4 */
						     "", "", "", "", "", "", "", "", "", "", "",
						     "EN_3V6", /* AB8500 GPIO16 */
						     "", "", "", "" ,"", "", "", "", "",
						     "EN_3V3", /* AB8500 GPIO26 */
						     "", "", "", "", "", "", "", "", "", "", "", "", "",
						     "PM_GPIO40", /* AB8500 GPIO40 */
						     "PM_GPIO41", /* AB8500 GPIO41 */
						     "PM_GPIO42"; /* AB8500 GPIO42 */
				};

				ab8500_usb {
					pinctrl-names = "default", "sleep";
					pinctrl-0 = <&musb_default_mode>;
					pinctrl-1 = <&musb_sleep_mode>;
				};

				ext_regulators: ab8500-ext-regulators {
					ab8500_ext1_reg: ab8500_ext1 {
						regulator-name = "ab8500-ext-supply1";
					};

					ab8500_ext2_reg_reg: ab8500_ext2 {
						regulator-name = "ab8500-ext-supply2";
					};

					ab8500_ext3_reg_reg: ab8500_ext3 {
						regulator-name = "ab8500-ext-supply3";
					};
				};

				ab8500-regulators {
					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
						regulator-name = "V-DISPLAY";
					};

					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
						regulator-name = "V-eMMC1";
					};

					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
						regulator-name = "V-MMC-SD";
					};

					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
						regulator-name = "V-INTCORE";
					};

					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
						regulator-name = "V-TVOUT";
					};

					ab8500_ldo_usb_reg: ab8500_ldo_usb {
						regulator-name = "dummy";
					};

					ab8500_ldo_audio_reg: ab8500_ldo_audio {
						regulator-name = "V-AUD";
					};

					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
						regulator-name = "V-AMIC1";
					};

					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
						regulator-name = "V-AMIC2";
					};

					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
						regulator-name = "V-DMIC";
					};

					ab8500_ldo_ana_reg: ab8500_ldo_ana {
						regulator-name = "V-CSI/DSI";
					};
				};
			};
		};

		pinctrl {
			/*
			 * Set this up using hogs, as time goes by and as seems fit, these
			 * can be moved over to being controlled by respective device.
			 */
			pinctrl-names = "default";
			pinctrl-0 = <&gbf_snowball_mode>,
				  <&wlan_snowball_mode>;

			ethernet {
				/*
				 * Mux in "SM" which is used for the
				 * SMSC911x Ethernet adapter
				 */
				eth_snowball_mode: eth_snowball {
					snowball_mux {
						function = "sm";
						groups = "sm_b_1";
					};
					/* LAN IRQ pin */
					snowball_cfg1 {
						pins = "GPIO140_B11";
						ste,config = <&in_nopull>;
					};
					/* LAN reset pin */
					snowball_cfg2 {
						pins = "GPIO141_C12";
						ste,config = <&gpio_out_hi>;
					};

				};
			};
			sdi0 {
				sdi0_default_mode: sdi0_default {
					snowball_mux {
						function = "mc0";
						/* Add the DAT31 pin even if it is not really used */
						groups = "mc0dat31dir_a_1";
					};
					snowball_cfg1 {
						pins = "GPIO21_AB3"; /* DAT31DIR */
						ste,config = <&out_hi>;
					};
					/* SD card detect GPIO pin, extend default state */
					snowball_cfg2 {
						pins = "GPIO218_AH11";
						ste,config = <&gpio_in_pu>;
					};
					/* VMMCI level-shifter enable */
					snowball_cfg3 {
						pins = "GPIO217_AH12";
						ste,config = <&gpio_out_hi>;
					};
					/* VMMCI level-shifter voltage select */
					snowball_cfg4 {
						pins = "GPIO228_AJ6";
						ste,config = <&gpio_out_hi>;
					};
				};
			};
			ssp0 {
				ssp0_snowball_mode: ssp0_snowball_default {
					snowball_mux {
						function = "ssp0";
						groups = "ssp0_a_1";
					};
					snowball_cfg1 {
						pins = "GPIO144_B13"; /* FRM */
						ste,config = <&gpio_out_hi>;
					};
					snowball_cfg2 {
						pins = "GPIO145_C13"; /* RXD */
						ste,config = <&in_pd>;
					};
					snowball_cfg3 {
						pins =
						"GPIO146_D13", /* TXD */
						"GPIO143_D12"; /* CLK */
						ste,config = <&out_lo>;
					};

				};
			};
			gpio_led {
				gpioled_snowball_mode: gpioled_default {
					snowball_cfg1 {
						pins = "GPIO142_C11";
						ste,config = <&gpio_out_hi>;
					};

				};
			};
			accelerometer {
				accel_snowball_mode: accel_snowball {
					/* Accelerometer lines */
					snowball_cfg1 {
						pins =
						"GPIO163_C20", /* ACCEL_IRQ1 */
						"GPIO164_B21"; /* ACCEL_IRQ2 */
						ste,config = <&gpio_in_pu>;
					};
				};
			};
			gyro {
				gyro_snowball_mode: gyro_snowball {
					snowball_cfg1 {
						pins =
						"GPIO166_A22", /* DRDY */
						"GPIO169_D22"; /* INT */
						ste,config = <&gpio_in_pu>;
					};
				};
			};
			magnetometer {
				magneto_snowball_mode: magneto_snowball {
					snowball_cfg1 {
						pins = "GPIO165_C21"; /* MAG_DRDY */
						ste,config = <&gpio_in_pu>;
					};
				};
			};
			gbf {
				gbf_snowball_mode: gbf_snowball {
					/*
					 * GBF (GPS, Bluetooth, FM-radio) interface,
					 * pull low to reset state
					 */
					snowball_cfg1 {
						pins = "GPIO171_D23"; /* GBF_ENA_RESET */
						ste,config = <&gpio_out_lo>;
					};
				 };
			};
			wlan {
				wlan_snowball_mode: wlan_snowball {
					/*
					 * Activate this mode with the WLAN chip.
					 * These are plain GPIO pins used by WLAN
					 */
					snowball_cfg1 {
						pins =
						"GPIO161_D21", /* WLAN_PMU_EN */
						"GPIO215_AH13"; /* WLAN_ENA */
						ste,config = <&gpio_out_lo>;
					};
					snowball_cfg2 {
						pins = "GPIO216_AG12"; /* WLAN_IRQ */
						ste,config = <&gpio_in_pu>;
					};
				};
			};
		};

		mcde@a0350000 {
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&lcd_default_mode>;
			pinctrl-1 = <&lcd_sleep_mode>;
		};
	};
};
Commit	Line	Data
2d334297 AB	1	/*
	2	* Copyright 2011 ST-Ericsson AB
	3	*
	4	* The code contained herein is licensed under the GNU General Public
	5	* License. You may obtain a copy of the GNU General Public License
	6	* Version 2 or later at the following locations:
	7	*
	8	* http://www.opensource.org/licenses/gpl-license.html
	9	* http://www.gnu.org/copyleft/gpl.html
	10	*/
	11
	12	/dts-v1/;
2ce05a14	13	#include "ste-dbx5x0.dtsi"
83200629	14	#include "ste-href-ab8500.dtsi"
3bfdebba	15	#include "ste-href-family-pinctrl.dtsi"
2d334297 AB	16
	17	/ {
	18	model = "Calao Systems Snowball platform with device tree";
79b40753	19	compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
2d334297	20
109978de LW	21	/* This stablilizes the serial port enumeration */
	22	aliases {
	23	serial0 = &ux500_serial0;
	24	serial1 = &ux500_serial1;
	25	serial2 = &ux500_serial2;
	26	};
	27
2d334297 AB	28	memory {
	29	reg = <0x00000000 0x20000000>;
	30	};
	31
bc367481 LJ	32	en_3v3_reg: en_3v3 {
bc367481 LJ	33	compatible = "regulator-fixed";
b099576d LJ	34	regulator-name = "en-3v3-fixed-supply";
	35	regulator-min-microvolt = <3300000>;
	36	regulator-max-microvolt = <3300000>;
	37	/* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */
	38	gpio = <&ab8500_gpio 25 0x4>;
	39	startup-delay-us = <5000>;
	40	enable-active-high;
bc367481 LJ	41	};
bc367481 LJ	42
7e0ce270 LJ	43	gpio_keys {
	44	compatible = "gpio-keys";
	45	#address-cells = <1>;
	46	#size-cells = <0>;
	47
	48	button@1 {
e40e7c5c	49	debounce-interval = <50>;
4db7062c	50	wakeup-source;
7e0ce270 LJ	51	linux,code = <2>;
7e0ce270 LJ	52	label = "userpb";
1b1e8e02	53	gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
7e0ce270 LJ	54	};
7e0ce270 LJ	55	button@2 {
e40e7c5c	56	debounce-interval = <50>;
4db7062c	57	wakeup-source;
7e0ce270	58	linux,code = <3>;
3f3ed400	59	label = "extkb1";
1b1e8e02	60	gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
7e0ce270 LJ	61	};
7e0ce270 LJ	62	button@3 {
e40e7c5c	63	debounce-interval = <50>;
4db7062c	64	wakeup-source;
7e0ce270	65	linux,code = <4>;
3f3ed400	66	label = "extkb2";
1b1e8e02	67	gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
7e0ce270 LJ	68	};
7e0ce270 LJ	69	button@4 {
e40e7c5c	70	debounce-interval = <50>;
4db7062c	71	wakeup-source;
7e0ce270	72	linux,code = <5>;
3f3ed400	73	label = "extkb3";
1b1e8e02	74	gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
7e0ce270 LJ	75	};
7e0ce270 LJ	76	button@5 {
e40e7c5c	77	debounce-interval = <50>;
4db7062c	78	wakeup-source;
7e0ce270	79	linux,code = <6>;
3f3ed400	80	label = "extkb4";
1b1e8e02	81	gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
7e0ce270 LJ	82	};
	83	};
	84
	85	leds {
	86	compatible = "gpio-leds";
2f4b84f8 LW	87	pinctrl-names = "default";
2f4b84f8 LW	88	pinctrl-0 = <&gpioled_snowball_mode>;
7e0ce270 LJ	89	used-led {
7e0ce270 LJ	90	label = "user_led";
1b1e8e02	91	gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
7fd975fa	92	default-state = "on";
fd53d042	93	linux,default-trigger = "heartbeat";
7e0ce270 LJ	94	};
	95	};
	96
b1ba1439	97	soc {
ad9454b9 LW	98	/* Name the GPIO muxed rails on the Snowball board */
	99	gpio@8012e000 {
	100	/* GPIOs 0 - 31 */
	101	gpio-line-names = "", "", "", "", "", "", "", "",
	102	"", "", "", "", "", "", "", "",
	103	"", "", "", "", "", "", "", "",
	104	"", "", "", "", "", "", "",
	105	"AP_GPIO31";
	106	};
	107
	108	gpio@8012e080 {
	109	/* GPIOs 32 - 63 */
	110	gpio-line-names = "USR PB", "", "", "", "", "", "", "",
	111	"", "", "", "", "", "", "", "",
	112	"", "", "", "", "", "", "", "",
	113	"", "", "", "", "", "", "", "";
	114	};
	115
	116	gpio@8000e000 {
	117	/* GPIOs 64 - 95 */
	118	gpio-line-names = "", "", "", "", "AP_GPIO68", "", "", "",
	119	"", "", "", "", "", "", "", "",
	120	"", "", "", "", "", "", "", "",
	121	"", "", "", "", "", "", "", "";
	122	};
	123
	124	gpio@8000e100 {
	125	/* GPIOs 128 - 159 */
	126	gpio-line-names = "", "", "", "", "", "", "", "",
	127	"", "", "", "", "IRQ_LAN", "RSTn_LAN",
	128	"USR_LED", "", "", "", "", "", "",
	129	"", "", "AP_GPIO151", "AP_GPIO152",
	130	"", "", "", "", "", "", "";
	131	};
	132
	133	gpio@8000e180 {
	134	/* GPIOs 160 - 191 */
	135	gpio-line-names = "", "AP_GPIO161", "AP_GPIO162",
	136	"ACCELEROMETER_INT1_RDY",
	137	"ACCELEROMETER_INT2", "MAG_DRDY",
	138	"GYRO_DRDY", "RSTn_MLC", "RSTn_SLC",
	139	"GYRO_INT", "UART_WAKE", "GBF_RESET",
	140	"", "", "", "",
	141	"", "", "", "", "", "", "", "",
	142	"", "", "", "", "", "", "", "";
	143	};
	144
	145	gpio@8011e000 {
	146	/* GPIOs 192 - 223 */
	147	gpio-line-names = "HDTV_INTn", "", "", "", "HDTV_RST",
	148	"", "", "", "", "", "", "", "", "",
	149	"", "", "", "", "", "", "", "", "",
	150	"WLAN_RESETN", "WLAN_IRQ", "MMC_EN",
	151	"MMC_CD", "", "", "", "", "";
	152	};
	153
	154	gpio@8011e080 {
	155	/* GPIOs 224 - 255 */
	156	gpio-line-names = "", "", "", "", "SD_SEL", "", "", "",
	157	"", "", "", "", "", "", "", "",
	158	"", "", "", "", "", "", "", "",
	159	"", "", "", "", "", "", "", "";
	160	};
	161
70b41abc LW	162	msp0: msp@80123000 {
	163	pinctrl-names = "default";
	164	pinctrl-0 = <&msp0_default_mode>;
	165	status = "okay";
	166	};
	167
fe164529	168	msp1: msp@80124000 {
70b41abc LW	169	pinctrl-names = "default";
	170	pinctrl-0 = <&msp1_default_mode>;
	171	status = "okay";
	172	};
	173
	174	msp2: msp@80117000 {
	175	pinctrl-names = "default";
	176	pinctrl-0 = <&msp2_default_mode>;
fe164529 LJ	177	};
	178
	179	msp3: msp@80125000 {
	180	status = "okay";
	181	};
	182
7e0ce270	183	external-bus@50000000 {
bf76e062 LJ	184	status = "okay";
	185
	186	ethernet@0 {
	187	compatible = "smsc,lan9115";
	188	reg = <0 0x10000>;
90c40257	189	interrupts = <12 IRQ_TYPE_EDGE_RISING>;
7e0ce270	190	interrupt-parent = <&gpio4>;
bc367481 LJ	191	vdd33a-supply = <&en_3v3_reg>;
bc367481 LJ	192	vddvario-supply = <&db8500_vape_reg>;
a48bf4b9 LW	193	pinctrl-names = "default";
a48bf4b9 LW	194	pinctrl-0 = <&eth_snowball_mode>;
bc367481	195
bf76e062 LJ	196	reg-shift = <1>;
	197	reg-io-width = <2>;
	198	smsc,force-internal-phy;
	199	smsc,irq-active-high;
	200	smsc,irq-push-pull;
7fb2afc7 LJ	201
7fb2afc7 LJ	202	clocks = <&prcc_pclk 3 0>;
7e0ce270 LJ	203	};
	204	};
	205
adef953b	206	/* ST6G3244ME level translator for 1.8/2.9 V */
383307c2	207	vmmci: regulator-gpio {
53d26698 UH	208	compatible = "regulator-gpio";
53d26698 UH	209
adef953b	210	/* GPIO228 SD_SEL */
1b1e8e02	211	gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
adef953b	212	/* GPIO217 MMC_EN */
1b1e8e02	213	enable-gpio = <&gpio6 25 GPIO_ACTIVE_HIGH>;
adef953b	214	enable-active-high;
53d26698 UH	215
	216	regulator-min-microvolt = <1800000>;
	217	regulator-max-microvolt = <2900000>;
	218	regulator-name = "mmci-reg";
	219	regulator-type = "voltage";
	220
	221	startup-delay-us = <100>;
53d26698 UH	222
	223	states = <1800000 0x1
	224	2900000 0x0>;
383307c2 LJ	225	};
383307c2 LJ	226
5e1ac7db	227	// External Micro SD slot
81bf8c2e	228	sdi0_per1@80126000 {
5e1ac7db	229	arm,primecell-periphid = <0x10480180>;
90ccde4c	230	max-frequency = <100000000>;
92a0f489	231	bus-width = <4>;
1b283eea	232	cap-sd-highspeed;
30cdd668	233	cap-mmc-highspeed;
1b283eea LW	234	sd-uhs-sdr12;
	235	sd-uhs-sdr25;
	236	/* All direction control is used */
	237	st,sig-dir-cmd;
	238	st,sig-dir-dat0;
	239	st,sig-dir-dat2;
	240	st,sig-dir-dat31;
	241	st,sig-pin-fbclk;
	242	full-pwr-cycle;
4a85c7fa	243	vmmc-supply = <&ab8500_ldo_aux3_reg>;
383307c2	244	vqmmc-supply = <&vmmci>;
1e662353 LW	245	pinctrl-names = "default", "sleep";
	246	pinctrl-0 = <&sdi0_default_mode>;
	247	pinctrl-1 = <&sdi0_sleep_mode>;
5e1ac7db	248
1b283eea LW	249	/* GPIO218 MMC_CD */
1b283eea LW	250	cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>;
5e1ac7db LJ	251
5e1ac7db LJ	252	status = "okay";
7e0ce270 LJ	253	};
7e0ce270 LJ	254
1e662353 LW	255	// WLAN SDIO channel
	256	sdi1_per2@80118000 {
	257	arm,primecell-periphid = <0x10480180>;
	258	max-frequency = <100000000>;
	259	bus-width = <4>;
	260	pinctrl-names = "default", "sleep";
	261	pinctrl-0 = <&sdi1_default_mode>;
	262	pinctrl-1 = <&sdi1_sleep_mode>;
	263
	264	status = "okay";
	265	};
	266
	267	// Unused PoP eMMC - register and put it to sleep by default */
	268	sdi2_per3@80005000 {
	269	arm,primecell-periphid = <0x10480180>;
	270	pinctrl-names = "default";
	271	pinctrl-0 = <&sdi2_sleep_mode>;
	272
	273	status = "okay";
	274	};
	275
5e1ac7db	276	// On-board eMMC
81bf8c2e	277	sdi4_per2@80114000 {
5e1ac7db	278	arm,primecell-periphid = <0x10480180>;
90ccde4c	279	max-frequency = <100000000>;
5e1ac7db	280	bus-width = <8>;
30cdd668	281	cap-mmc-highspeed;
4a85c7fa	282	vmmc-supply = <&ab8500_ldo_aux2_reg>;
1e662353 LW	283	pinctrl-names = "default", "sleep";
	284	pinctrl-0 = <&sdi4_default_mode>;
	285	pinctrl-1 = <&sdi4_sleep_mode>;
5e1ac7db LJ	286
5e1ac7db LJ	287	status = "okay";
7e0ce270 LJ	288	};
7e0ce270 LJ	289
4905af0e	290	uart@80120000 {
3bfdebba LW	291	pinctrl-names = "default", "sleep";
	292	pinctrl-0 = <&uart0_default_mode>;
	293	pinctrl-1 = <&uart0_sleep_mode>;
4905af0e LJ	294	status = "okay";
	295	};
	296
1d8aca9d	297	/* This UART is unused and thus left disabled */
4905af0e	298	uart@80121000 {
3bfdebba LW	299	pinctrl-names = "default", "sleep";
	300	pinctrl-0 = <&uart1_default_mode>;
	301	pinctrl-1 = <&uart1_sleep_mode>;
4905af0e LJ	302	};
	303
	304	uart@80007000 {
3bfdebba LW	305	pinctrl-names = "default", "sleep";
	306	pinctrl-0 = <&uart2_default_mode>;
	307	pinctrl-1 = <&uart2_sleep_mode>;
4905af0e LJ	308	status = "okay";
	309	};
	310
96fee13f LW	311	i2c@80004000 {
	312	pinctrl-names = "default","sleep";
	313	pinctrl-0 = <&i2c0_default_mode>;
	314	pinctrl-1 = <&i2c0_sleep_mode>;
	315	};
	316
	317	i2c@80122000 {
	318	pinctrl-names = "default","sleep";
	319	pinctrl-0 = <&i2c1_default_mode>;
	320	pinctrl-1 = <&i2c1_sleep_mode>;
	321	};
	322
	323	i2c@80128000 {
	324	pinctrl-names = "default","sleep";
	325	pinctrl-0 = <&i2c2_default_mode>;
	326	pinctrl-1 = <&i2c2_sleep_mode>;
d0e3bc81 LW	327	lsm303dlh@18 {
	328	/* Accelerometer */
	329	compatible = "st,lsm303dlh-accel";
	330	st,drdy-int-pin = <1>;
	331	reg = <0x18>;
	332	vdd-supply = <&ab8500_ldo_aux1_reg>;
	333	vddio-supply = <&db8500_vsmps2_reg>;
	334	pinctrl-names = "default";
	335	pinctrl-0 = <&accel_snowball_mode>;
22a93167 LW	336	interrupt-parent = <&gpio5>;
	337	interrupts = <3 IRQ_TYPE_EDGE_RISING>, /* INT1 */
	338	<4 IRQ_TYPE_EDGE_RISING>; /* INT2 */
d0e3bc81	339	};
93deea9a	340	lsm303dlh@1e {
d0e3bc81	341	/* Magnetometer */
93deea9a	342	compatible = "st,lsm303dlh-magn";
d0e3bc81 LW	343	reg = <0x1e>;
	344	vdd-supply = <&ab8500_ldo_aux1_reg>;
	345	vddio-supply = <&db8500_vsmps2_reg>;
	346	pinctrl-names = "default";
	347	pinctrl-0 = <&magneto_snowball_mode>;
c80b4010 LW	348	interrupt-parent = <&gpio5>;
c80b4010 LW	349	interrupts = <5 IRQ_TYPE_EDGE_RISING>; /* DRDY line */
d0e3bc81 LW	350	};
	351	l3g4200d@68 {
	352	/* Gyroscope */
	353	compatible = "st,l3g4200d-gyro";
	354	st,drdy-int-pin = <2>;
	355	reg = <0x68>;
	356	vdd-supply = <&ab8500_ldo_aux1_reg>;
	357	vddio-supply = <&db8500_vsmps2_reg>;
22a93167 LW	358	pinctrl-names = "default";
22a93167 LW	359	pinctrl-0 = <&gyro_snowball_mode>;
22a93167	360	interrupt-parent = <&gpio5>;
c80b4010 LW	361	interrupts = <6 IRQ_TYPE_EDGE_RISING>, /* DRDY line */
c80b4010 LW	362	<9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
d0e3bc81 LW	363	};
	364	lsp001wm@5c {
	365	/* Barometer/pressure sensor */
	366	compatible = "st,lps001wp-press";
	367	reg = <0x5c>;
	368	vdd-supply = <&ab8500_ldo_aux1_reg>;
	369	vddio-supply = <&db8500_vsmps2_reg>;
	370	};
96fee13f LW	371	};
	372
	373	i2c@80110000 {
	374	pinctrl-names = "default","sleep";
	375	pinctrl-0 = <&i2c3_default_mode>;
	376	pinctrl-1 = <&i2c3_sleep_mode>;
	377	};
	378
fd8f9eac LW	379	ssp@80002000 {
	380	pinctrl-names = "default";
	381	pinctrl-0 = <&ssp0_snowball_mode>;
	382	};
	383
dc1956b5	384	cpufreq-cooling {
	385	status = "okay";
	386	};
db5b0ae0	387
809efa56	388	prcmu@80157000 {
6cb7ea99 LJ	389	cpufreq {
	390	status = "okay";
	391	};
	392
6c1d25b0 LJ	393	thermal@801573c0 {
	394	num-trips = <4>;
	395
	396	trip0-temp = <70000>;
	397	trip0-type = "active";
	398	trip0-cdev-num = <1>;
	399	trip0-cdev-name0 = "thermal-cpufreq-0";
	400
	401	trip1-temp = <75000>;
	402	trip1-type = "active";
	403	trip1-cdev-num = <1>;
	404	trip1-cdev-name0 = "thermal-cpufreq-0";
	405
	406	trip2-temp = <80000>;
	407	trip2-type = "active";
	408	trip2-cdev-num = <1>;
	409	trip2-cdev-name0 = "thermal-cpufreq-0";
	410
	411	trip3-temp = <85000>;
	412	trip3-type = "critical";
	413	trip3-cdev-num = <0>;
	414
	415	status = "okay";
	416	};
	417
d52701d3	418	ab8500 {
924e82da	419	ab8500-gpio {
ad9454b9 LW	420	/*
	421	* AB8500 GPIOs are numbered starting from 1, so the first
	422	* index 0 is what in the datasheet is called "GPIO1", and
	423	* the second is "GPIO2" and so forth. Confusingly, the
	424	* Snowball schematic then names the "GPIO2" line "PM_GPIO1".
	425	* while later naming "GPIO4" as "PM_GPIO4".
	426	*/
	427	gpio-line-names = "", /* AB8500 GPIO1 */
	428	"PM_GPIO1", /* AB8500 GPIO2 */
	429	"WLAN_CLK_REQ", /* AB8500 GPIO3 */
	430	"PM_GPIO4", /* AB8500 GPIO4 */
	431	"", "", "", "", "", "", "", "", "", "", "",
	432	"EN_3V6", /* AB8500 GPIO16 */
	433	"", "", "", "" ,"", "", "", "", "",
	434	"EN_3V3", /* AB8500 GPIO26 */
	435	"", "", "", "", "", "", "", "", "", "", "", "", "",
	436	"PM_GPIO40", /* AB8500 GPIO40 */
	437	"PM_GPIO41", /* AB8500 GPIO41 */
	438	"PM_GPIO42"; /* AB8500 GPIO42 */
924e82da LJ	439	};
924e82da LJ	440
6097c2d0 LW	441	ab8500_usb {
	442	pinctrl-names = "default", "sleep";
	443	pinctrl-0 = <&musb_default_mode>;
	444	pinctrl-1 = <&musb_sleep_mode>;
	445	};
	446
b0c8fade LJ	447	ext_regulators: ab8500-ext-regulators {
	448	ab8500_ext1_reg: ab8500_ext1 {
	449	regulator-name = "ab8500-ext-supply1";
	450	};
	451
	452	ab8500_ext2_reg_reg: ab8500_ext2 {
	453	regulator-name = "ab8500-ext-supply2";
	454	};
	455
	456	ab8500_ext3_reg_reg: ab8500_ext3 {
	457	regulator-name = "ab8500-ext-supply3";
	458	};
	459	};
	460
809efa56 LJ	461	ab8500-regulators {
	462	ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
	463	regulator-name = "V-DISPLAY";
	464	};
	465
	466	ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
	467	regulator-name = "V-eMMC1";
	468	};
	469
	470	ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
	471	regulator-name = "V-MMC-SD";
	472	};
	473
99b38eef	474	ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
809efa56 LJ	475	regulator-name = "V-INTCORE";
	476	};
	477
	478	ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
	479	regulator-name = "V-TVOUT";
	480	};
	481
	482	ab8500_ldo_usb_reg: ab8500_ldo_usb {
	483	regulator-name = "dummy";
	484	};
	485
	486	ab8500_ldo_audio_reg: ab8500_ldo_audio {
	487	regulator-name = "V-AUD";
	488	};
	489
	490	ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
	491	regulator-name = "V-AMIC1";
	492	};
	493
5510ed9f	494	ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
809efa56 LJ	495	regulator-name = "V-AMIC2";
	496	};
	497
	498	ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
	499	regulator-name = "V-DMIC";
	500	};
	501
	502	ab8500_ldo_ana_reg: ab8500_ldo_ana {
	503	regulator-name = "V-CSI/DSI";
	504	};
	505	};
	506	};
	507	};
1e662353 LW	508
1e662353 LW	509	pinctrl {
4d4629fc LW	510	/*
	511	* Set this up using hogs, as time goes by and as seems fit, these
	512	* can be moved over to being controlled by respective device.
	513	*/
	514	pinctrl-names = "default";
d0e3bc81	515	pinctrl-0 = <&gbf_snowball_mode>,
4d4629fc LW	516	<&wlan_snowball_mode>;
4d4629fc LW	517
a48bf4b9 LW	518	ethernet {
	519	/*
	520	* Mux in "SM" which is used for the
	521	* SMSC911x Ethernet adapter
	522	*/
	523	eth_snowball_mode: eth_snowball {
	524	snowball_mux {
68d41f23 LW	525	function = "sm";
68d41f23 LW	526	groups = "sm_b_1";
a48bf4b9 LW	527	};
	528	/* LAN IRQ pin */
	529	snowball_cfg1 {
1637d480	530	pins = "GPIO140_B11";
a48bf4b9 LW	531	ste,config = <&in_nopull>;
	532	};
	533	/* LAN reset pin */
	534	snowball_cfg2 {
1637d480	535	pins = "GPIO141_C12";
a48bf4b9 LW	536	ste,config = <&gpio_out_hi>;
	537	};
	538
	539	};
	540	};
1e662353 LW	541	sdi0 {
	542	sdi0_default_mode: sdi0_default {
	543	snowball_mux {
68d41f23	544	function = "mc0";
adef953b	545	/* Add the DAT31 pin even if it is not really used */
68d41f23	546	groups = "mc0dat31dir_a_1";
1e662353 LW	547	};
1e662353 LW	548	snowball_cfg1 {
1637d480	549	pins = "GPIO21_AB3"; /* DAT31DIR */
1e662353 LW	550	ste,config = <&out_hi>;
1e662353 LW	551	};
1d8aca9d LW	552	/* SD card detect GPIO pin, extend default state */
	553	snowball_cfg2 {
	554	pins = "GPIO218_AH11";
	555	ste,config = <&gpio_in_pu>;
	556	};
	557	/* VMMCI level-shifter enable */
	558	snowball_cfg3 {
	559	pins = "GPIO217_AH12";
1b283eea	560	ste,config = <&gpio_out_hi>;
1d8aca9d LW	561	};
	562	/* VMMCI level-shifter voltage select */
	563	snowball_cfg4 {
	564	pins = "GPIO228_AJ6";
	565	ste,config = <&gpio_out_hi>;
	566	};
1e662353 LW	567	};
1e662353 LW	568	};
fd8f9eac LW	569	ssp0 {
	570	ssp0_snowball_mode: ssp0_snowball_default {
	571	snowball_mux {
68d41f23 LW	572	function = "ssp0";
68d41f23 LW	573	groups = "ssp0_a_1";
fd8f9eac LW	574	};
fd8f9eac LW	575	snowball_cfg1 {
1637d480	576	pins = "GPIO144_B13"; /* FRM */
fd8f9eac LW	577	ste,config = <&gpio_out_hi>;
	578	};
	579	snowball_cfg2 {
1637d480	580	pins = "GPIO145_C13"; /* RXD */
fd8f9eac LW	581	ste,config = <&in_pd>;
	582	};
	583	snowball_cfg3 {
1637d480	584	pins =
fd8f9eac LW	585	"GPIO146_D13", /* TXD */
	586	"GPIO143_D12"; /* CLK */
	587	ste,config = <&out_lo>;
	588	};
	589
	590	};
	591	};
2f4b84f8 LW	592	gpio_led {
	593	gpioled_snowball_mode: gpioled_default {
	594	snowball_cfg1 {
1637d480	595	pins = "GPIO142_C11";
2f4b84f8 LW	596	ste,config = <&gpio_out_hi>;
	597	};
	598
	599	};
	600	};
4d4629fc LW	601	accelerometer {
	602	accel_snowball_mode: accel_snowball {
	603	/* Accelerometer lines */
	604	snowball_cfg1 {
1637d480	605	pins =
4d4629fc LW	606	"GPIO163_C20", /* ACCEL_IRQ1 */
	607	"GPIO164_B21"; /* ACCEL_IRQ2 */
	608	ste,config = <&gpio_in_pu>;
	609	};
	610	};
	611	};
22a93167 LW	612	gyro {
	613	gyro_snowball_mode: gyro_snowball {
	614	snowball_cfg1 {
	615	pins =
	616	"GPIO166_A22", /* DRDY */
	617	"GPIO169_D22"; /* INT */
	618	ste,config = <&gpio_in_pu>;
	619	};
	620	};
	621	};
4d4629fc LW	622	magnetometer {
	623	magneto_snowball_mode: magneto_snowball {
	624	snowball_cfg1 {
1637d480	625	pins = "GPIO165_C21"; /* MAG_DRDY */
4d4629fc LW	626	ste,config = <&gpio_in_pu>;
	627	};
	628	};
	629	};
	630	gbf {
	631	gbf_snowball_mode: gbf_snowball {
	632	/*
	633	* GBF (GPS, Bluetooth, FM-radio) interface,
	634	* pull low to reset state
	635	*/
	636	snowball_cfg1 {
1637d480	637	pins = "GPIO171_D23"; /* GBF_ENA_RESET */
4d4629fc LW	638	ste,config = <&gpio_out_lo>;
	639	};
	640	};
	641	};
	642	wlan {
	643	wlan_snowball_mode: wlan_snowball {
	644	/*
	645	* Activate this mode with the WLAN chip.
	646	* These are plain GPIO pins used by WLAN
	647	*/
	648	snowball_cfg1 {
1637d480	649	pins =
4d4629fc LW	650	"GPIO161_D21", /* WLAN_PMU_EN */
	651	"GPIO215_AH13"; /* WLAN_ENA */
	652	ste,config = <&gpio_out_lo>;
	653	};
	654	snowball_cfg2 {
1637d480	655	pins = "GPIO216_AG12"; /* WLAN_IRQ */
4d4629fc LW	656	ste,config = <&gpio_in_pu>;
	657	};
	658	};
	659	};
1e662353	660	};
817a5b96 LW	661
	662	mcde@a0350000 {
	663	pinctrl-names = "default", "sleep";
	664	pinctrl-0 = <&lcd_default_mode>;
	665	pinctrl-1 = <&lcd_sleep_mode>;
	666	};
2d334297 AB	667	};
2d334297 AB	668	};