[linux-2.6-block.git] / arch / arm / boot / dts / spear1310.dtsi

/*
 * DTS file for all SPEAr1310 SoCs
 *
 * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

/include/ "spear13xx.dtsi"

/ {
	compatible = "st,spear1310";

	ahb {
		spics: spics@e0700000{
			compatible = "st,spear-spics-gpio";
			reg = <0xe0700000 0x1000>;
			st-spics,peripcfg-reg = <0x3b0>;
			st-spics,sw-enable-bit = <12>;
			st-spics,cs-value-bit = <11>;
			st-spics,cs-enable-mask = <3>;
			st-spics,cs-enable-shift = <8>;
			gpio-controller;
			#gpio-cells = <2>;
		};

		ahci@b1000000 {
			compatible = "snps,spear-ahci";
			reg = <0xb1000000 0x10000>;
			interrupts = <0 68 0x4>;
			status = "disabled";
		};

		ahci@b1800000 {
			compatible = "snps,spear-ahci";
			reg = <0xb1800000 0x10000>;
			interrupts = <0 69 0x4>;
			status = "disabled";
		};

		ahci@b4000000 {
			compatible = "snps,spear-ahci";
			reg = <0xb4000000 0x10000>;
			interrupts = <0 70 0x4>;
			status = "disabled";
		};

		gmac1: eth@5c400000 {
			compatible = "st,spear600-gmac";
			reg = <0x5c400000 0x8000>;
			interrupts = <0 95 0x4>;
			interrupt-names = "macirq";
			status = "disabled";
		};

		gmac2: eth@5c500000 {
			compatible = "st,spear600-gmac";
			reg = <0x5c500000 0x8000>;
			interrupts = <0 96 0x4>;
			interrupt-names = "macirq";
			status = "disabled";
		};

		gmac3: eth@5c600000 {
			compatible = "st,spear600-gmac";
			reg = <0x5c600000 0x8000>;
			interrupts = <0 97 0x4>;
			interrupt-names = "macirq";
			status = "disabled";
		};

		gmac4: eth@5c700000 {
			compatible = "st,spear600-gmac";
			reg = <0x5c700000 0x8000>;
			interrupts = <0 98 0x4>;
			interrupt-names = "macirq";
			status = "disabled";
		};

		pinmux: pinmux@e0700000 {
			compatible = "st,spear1310-pinmux";
			reg = <0xe0700000 0x1000>;
			#gpio-range-cells = <2>;
		};

		apb {
			i2c1: i2c@5cd00000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "snps,designware-i2c";
				reg = <0x5cd00000 0x1000>;
				interrupts = <0 87 0x4>;
				status = "disabled";
			};

			i2c2: i2c@5ce00000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "snps,designware-i2c";
				reg = <0x5ce00000 0x1000>;
				interrupts = <0 88 0x4>;
				status = "disabled";
			};

			i2c3: i2c@5cf00000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "snps,designware-i2c";
				reg = <0x5cf00000 0x1000>;
				interrupts = <0 89 0x4>;
				status = "disabled";
			};

			i2c4: i2c@5d000000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "snps,designware-i2c";
				reg = <0x5d000000 0x1000>;
				interrupts = <0 90 0x4>;
				status = "disabled";
			};

			i2c5: i2c@5d100000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "snps,designware-i2c";
				reg = <0x5d100000 0x1000>;
				interrupts = <0 91 0x4>;
				status = "disabled";
			};

			i2c6: i2c@5d200000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "snps,designware-i2c";
				reg = <0x5d200000 0x1000>;
				interrupts = <0 92 0x4>;
				status = "disabled";
			};

			i2c7: i2c@5d300000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "snps,designware-i2c";
				reg = <0x5d300000 0x1000>;
				interrupts = <0 93 0x4>;
				status = "disabled";
			};

			spi1: spi@5d400000 {
				compatible = "arm,pl022", "arm,primecell";
				reg = <0x5d400000 0x1000>;
				interrupts = <0 99 0x4>;
				status = "disabled";
			};

			serial@5c800000 {
				compatible = "arm,pl011", "arm,primecell";
				reg = <0x5c800000 0x1000>;
				interrupts = <0 82 0x4>;
				status = "disabled";
			};

			serial@5c900000 {
				compatible = "arm,pl011", "arm,primecell";
				reg = <0x5c900000 0x1000>;
				interrupts = <0 83 0x4>;
				status = "disabled";
			};

			serial@5ca00000 {
				compatible = "arm,pl011", "arm,primecell";
				reg = <0x5ca00000 0x1000>;
				interrupts = <0 84 0x4>;
				status = "disabled";
			};

			serial@5cb00000 {
				compatible = "arm,pl011", "arm,primecell";
				reg = <0x5cb00000 0x1000>;
				interrupts = <0 85 0x4>;
				status = "disabled";
			};

			serial@5cc00000 {
				compatible = "arm,pl011", "arm,primecell";
				reg = <0x5cc00000 0x1000>;
				interrupts = <0 86 0x4>;
				status = "disabled";
			};

			thermal@e07008c4 {
				st,thermal-flags = <0x7000>;
			};

			gpiopinctrl: gpio@d8400000 {
				compatible = "st,spear-plgpio";
				reg = <0xd8400000 0x1000>;
				interrupts = <0 100 0x4>;
				#interrupt-cells = <1>;
				interrupt-controller;
				gpio-controller;
				#gpio-cells = <2>;
				gpio-ranges = <&pinmux 0 246>;
				status = "disabled";

				st-plgpio,ngpio = <246>;
				st-plgpio,enb-reg = <0xd0>;
				st-plgpio,wdata-reg = <0x90>;
				st-plgpio,dir-reg = <0xb0>;
				st-plgpio,ie-reg = <0x30>;
				st-plgpio,rdata-reg = <0x70>;
				st-plgpio,mis-reg = <0x10>;
				st-plgpio,eit-reg = <0x50>;
			};
		};
	};
};
Commit	Line	Data
07658d9a VK	1	/*
	2	* DTS file for all SPEAr1310 SoCs
	3	*
10d8935f	4	* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
07658d9a VK	5	*
	6	* The code contained herein is licensed under the GNU General Public
	7	* License. You may obtain a copy of the GNU General Public License
	8	* Version 2 or later at the following locations:
	9	*
	10	* http://www.opensource.org/licenses/gpl-license.html
	11	* http://www.gnu.org/copyleft/gpl.html
	12	*/
	13
	14	/include/ "spear13xx.dtsi"
	15
	16	/ {
	17	compatible = "st,spear1310";
	18
	19	ahb {
7cef07d5 SH	20	spics: spics@e0700000{
	21	compatible = "st,spear-spics-gpio";
	22	reg = <0xe0700000 0x1000>;
	23	st-spics,peripcfg-reg = <0x3b0>;
	24	st-spics,sw-enable-bit = <12>;
	25	st-spics,cs-value-bit = <11>;
	26	st-spics,cs-enable-mask = <3>;
	27	st-spics,cs-enable-shift = <8>;
	28	gpio-controller;
	29	#gpio-cells = <2>;
	30	};
	31
07658d9a VK	32	ahci@b1000000 {
	33	compatible = "snps,spear-ahci";
	34	reg = <0xb1000000 0x10000>;
	35	interrupts = <0 68 0x4>;
	36	status = "disabled";
	37	};
	38
	39	ahci@b1800000 {
	40	compatible = "snps,spear-ahci";
	41	reg = <0xb1800000 0x10000>;
	42	interrupts = <0 69 0x4>;
	43	status = "disabled";
	44	};
	45
	46	ahci@b4000000 {
	47	compatible = "snps,spear-ahci";
	48	reg = <0xb4000000 0x10000>;
	49	interrupts = <0 70 0x4>;
	50	status = "disabled";
	51	};
	52
	53	gmac1: eth@5c400000 {
	54	compatible = "st,spear600-gmac";
	55	reg = <0x5c400000 0x8000>;
	56	interrupts = <0 95 0x4>;
	57	interrupt-names = "macirq";
	58	status = "disabled";
	59	};
	60
	61	gmac2: eth@5c500000 {
	62	compatible = "st,spear600-gmac";
	63	reg = <0x5c500000 0x8000>;
	64	interrupts = <0 96 0x4>;
	65	interrupt-names = "macirq";
	66	status = "disabled";
	67	};
	68
	69	gmac3: eth@5c600000 {
	70	compatible = "st,spear600-gmac";
	71	reg = <0x5c600000 0x8000>;
	72	interrupts = <0 97 0x4>;
	73	interrupt-names = "macirq";
	74	status = "disabled";
	75	};
	76
	77	gmac4: eth@5c700000 {
	78	compatible = "st,spear600-gmac";
	79	reg = <0x5c700000 0x8000>;
	80	interrupts = <0 98 0x4>;
	81	interrupt-names = "macirq";
	82	status = "disabled";
	83	};
	84
4ddb1c29 VK	85	pinmux: pinmux@e0700000 {
	86	compatible = "st,spear1310-pinmux";
	87	reg = <0xe0700000 0x1000>;
	88	#gpio-range-cells = <2>;
	89	};
	90
07658d9a VK	91	apb {
	92	i2c1: i2c@5cd00000 {
	93	#address-cells = <1>;
	94	#size-cells = <0>;
	95	compatible = "snps,designware-i2c";
	96	reg = <0x5cd00000 0x1000>;
	97	interrupts = <0 87 0x4>;
	98	status = "disabled";
	99	};
	100
	101	i2c2: i2c@5ce00000 {
	102	#address-cells = <1>;
	103	#size-cells = <0>;
	104	compatible = "snps,designware-i2c";
	105	reg = <0x5ce00000 0x1000>;
	106	interrupts = <0 88 0x4>;
	107	status = "disabled";
	108	};
	109
	110	i2c3: i2c@5cf00000 {
	111	#address-cells = <1>;
	112	#size-cells = <0>;
	113	compatible = "snps,designware-i2c";
	114	reg = <0x5cf00000 0x1000>;
	115	interrupts = <0 89 0x4>;
	116	status = "disabled";
	117	};
	118
	119	i2c4: i2c@5d000000 {
	120	#address-cells = <1>;
	121	#size-cells = <0>;
	122	compatible = "snps,designware-i2c";
	123	reg = <0x5d000000 0x1000>;
	124	interrupts = <0 90 0x4>;
	125	status = "disabled";
	126	};
	127
	128	i2c5: i2c@5d100000 {
	129	#address-cells = <1>;
	130	#size-cells = <0>;
	131	compatible = "snps,designware-i2c";
	132	reg = <0x5d100000 0x1000>;
	133	interrupts = <0 91 0x4>;
	134	status = "disabled";
	135	};
	136
	137	i2c6: i2c@5d200000 {
	138	#address-cells = <1>;
	139	#size-cells = <0>;
	140	compatible = "snps,designware-i2c";
	141	reg = <0x5d200000 0x1000>;
	142	interrupts = <0 92 0x4>;
	143	status = "disabled";
	144	};
	145
	146	i2c7: i2c@5d300000 {
	147	#address-cells = <1>;
	148	#size-cells = <0>;
	149	compatible = "snps,designware-i2c";
	150	reg = <0x5d300000 0x1000>;
	151	interrupts = <0 93 0x4>;
	152	status = "disabled";
	153	};
	154
f631b984 VKS	155	spi1: spi@5d400000 {
	156	compatible = "arm,pl022", "arm,primecell";
	157	reg = <0x5d400000 0x1000>;
	158	interrupts = <0 99 0x4>;
	159	status = "disabled";
	160	};
	161
07658d9a VK	162	serial@5c800000 {
	163	compatible = "arm,pl011", "arm,primecell";
	164	reg = <0x5c800000 0x1000>;
	165	interrupts = <0 82 0x4>;
	166	status = "disabled";
	167	};
	168
	169	serial@5c900000 {
	170	compatible = "arm,pl011", "arm,primecell";
	171	reg = <0x5c900000 0x1000>;
	172	interrupts = <0 83 0x4>;
	173	status = "disabled";
	174	};
	175
	176	serial@5ca00000 {
	177	compatible = "arm,pl011", "arm,primecell";
	178	reg = <0x5ca00000 0x1000>;
	179	interrupts = <0 84 0x4>;
	180	status = "disabled";
	181	};
	182
	183	serial@5cb00000 {
	184	compatible = "arm,pl011", "arm,primecell";
	185	reg = <0x5cb00000 0x1000>;
	186	interrupts = <0 85 0x4>;
	187	status = "disabled";
	188	};
	189
	190	serial@5cc00000 {
	191	compatible = "arm,pl011", "arm,primecell";
	192	reg = <0x5cc00000 0x1000>;
	193	interrupts = <0 86 0x4>;
	194	status = "disabled";
	195	};
	196
	197	thermal@e07008c4 {
	198	st,thermal-flags = <0x7000>;
	199	};
4ddb1c29 VK	200
	201	gpiopinctrl: gpio@d8400000 {
	202	compatible = "st,spear-plgpio";
	203	reg = <0xd8400000 0x1000>;
	204	interrupts = <0 100 0x4>;
	205	#interrupt-cells = <1>;
	206	interrupt-controller;
	207	gpio-controller;
	208	#gpio-cells = <2>;
	209	gpio-ranges = <&pinmux 0 246>;
	210	status = "disabled";
	211
	212	st-plgpio,ngpio = <246>;
	213	st-plgpio,enb-reg = <0xd0>;
	214	st-plgpio,wdata-reg = <0x90>;
	215	st-plgpio,dir-reg = <0xb0>;
	216	st-plgpio,ie-reg = <0x30>;
	217	st-plgpio,rdata-reg = <0x70>;
	218	st-plgpio,mis-reg = <0x10>;
	219	st-plgpio,eit-reg = <0x50>;
	220	};
07658d9a VK	221	};
	222	};
	223	};