ARM: dts: armada388-clearfog: enable spi flash

[linux-2.6-block.git] / arch / arm / boot / dts / s5pv210-smdkv210.dts

// SPDX-License-Identifier: GPL-2.0
/*
 * Samsung's S5PV210 SoC device tree source
 *
 * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
 *
 * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
 * Tomasz Figa <t.figa@samsung.com>
 *
 * Board device tree source for YIC System SMDV210 board.
 *
 * NOTE: This file is completely based on original board file for mach-smdkv210
 * available in Linux 3.15 and intends to provide equivalent level of hardware
 * support. Due to lack of hardware, _no_ testing has been performed.
 */

/dts-v1/;
#include <dt-bindings/input/input.h>
#include "s5pv210.dtsi"

/ {
	model = "YIC System SMDKV210 based on S5PV210";
	compatible = "yic,smdkv210", "samsung,s5pv210";

	chosen {
		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
	};

	memory@20000000 {
		device_type = "memory";
		reg = <0x20000000 0x40000000>;
	};

	ethernet@18000000 {
		compatible = "davicom,dm9000";
		reg = <0xA8000000 0x2 0xA8000002 0x2>;
		interrupt-parent = <&gph1>;
		interrupts = <1 4>;
		local-mac-address = [00 00 de ad be ef];
		davicom,no-eeprom;
	};

	backlight {
		compatible = "pwm-backlight";
		pwms = <&pwm 3 5000000 0>;
		brightness-levels = <0 4 8 16 32 64 128 255>;
		default-brightness-level = <6>;
		pinctrl-names = "default";
		pinctrl-0 = <&pwm3_out>;
	};
};

&xusbxti {
	clock-frequency = <24000000>;
};

&keypad {
	linux,input-no-autorepeat;
	wakeup-source;
	samsung,keypad-num-rows = <8>;
	samsung,keypad-num-columns = <8>;
	pinctrl-names = "default";
	pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
			<&keypad_row3>, <&keypad_row4>, <&keypad_row5>,
			<&keypad_row6>, <&keypad_row7>,
			<&keypad_col0>, <&keypad_col1>, <&keypad_col2>,
			<&keypad_col3>, <&keypad_col4>, <&keypad_col5>,
			<&keypad_col6>, <&keypad_col7>;
	status = "okay";

	key_1 {
		keypad,row = <0>;
		keypad,column = <3>;
		linux,code = <KEY_1>;
	};

	key_2 {
		keypad,row = <0>;
		keypad,column = <4>;
		linux,code = <KEY_2>;
	};

	key_3 {
		keypad,row = <0>;
		keypad,column = <5>;
		linux,code = <KEY_3>;
	};

	key_4 {
		keypad,row = <0>;
		keypad,column = <6>;
		linux,code = <KEY_4>;
	};

	key_5 {
		keypad,row = <0
		>;
		keypad,column = <7>;
		linux,code = <KEY_5>;
	};

	key_6 {
		keypad,row = <1>;
		keypad,column = <3>;
		linux,code = <KEY_A>;
	};
	key_7 {
		keypad,row = <1>;
		keypad,column = <4>;
		linux,code = <KEY_B>;
	};

	key_8 {
		keypad,row = <1>;
		keypad,column = <5>;
		linux,code = <KEY_C>;
	};

	key_9 {
		keypad,row = <1>;
		keypad,column = <6>;
		linux,code = <KEY_D>;
	};

	key_10 {
		keypad,row = <1>;
		keypad,column = <7>;
		linux,code = <KEY_E>;
	};
};

&uart0 {
	status = "okay";
};

&uart1 {
	status = "okay";
};

&uart2 {
	status = "okay";
};

&uart3 {
	status = "okay";
};

&rtc {
	status = "okay";
};

&sdhci0 {
	bus-width = <4>;
	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
	pinctrl-names = "default";
	status = "okay";
};

&sdhci1 {
	bus-width = <4>;
	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>;
	pinctrl-names = "default";
	status = "okay";
};

&sdhci2 {
	bus-width = <4>;
	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
	pinctrl-names = "default";
	status = "okay";
};

&sdhci3 {
	bus-width = <4>;
	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>;
	pinctrl-names = "default";
	status = "okay";
};

&hsotg {
	dr_mode = "peripheral";
	status = "okay";
};

&usbphy {
	status = "okay";
};

&fimd {
	pinctrl-0 = <&lcd_clk &lcd_data24>;
	pinctrl-names = "default";
	status = "okay";

	display-timings {
		native-mode = <&timing0>;

		timing0: timing {
			/* 800x480@60Hz */
			clock-frequency = <24373920>;
			hactive = <800>;
			vactive = <480>;
			hfront-porch = <8>;
			hback-porch = <13>;
			hsync-len = <3>;
			vback-porch = <7>;
			vfront-porch = <5>;
			vsync-len = <1>;
			hsync-active = <0>;
			vsync-active = <0>;
			de-active = <1>;
			pixelclk-active = <1>;
		};
	};
};

&pwm {
	samsung,pwm-outputs = <3>;
};

&i2c0 {
	status = "okay";

	audio-codec@1b {
		compatible = "wlf,wm8580";
		reg = <0x1b>;
	};

	eeprom@50 {
		compatible = "atmel,24c08";
		reg = <0x50>;
	};
};

&i2s0 {
	status = "okay";
};