[linux-2.6-block.git] / arch / arm / boot / dts / r8a7791-koelsch.dts

/*
 * Device Tree Source for the Koelsch board
 *
 * Copyright (C) 2013 Renesas Electronics Corporation
 * Copyright (C) 2013-2014 Renesas Solutions Corp.
 * Copyright (C) 2014 Cogent Embedded, Inc.
 *
 * This file is licensed under the terms of the GNU General Public License
 * version 2.  This program is licensed "as is" without any warranty of any
 * kind, whether express or implied.
 */

/*
 * SSI-AK4643
 *
 * SW1: 1: AK4643
 *      2: CN22
 *      3: ADV7511
 *
 * This command is required when Playback/Capture
 *
 *	amixer set "LINEOUT Mixer DACL" on
 *	amixer set "DVC Out" 100%
 *	amixer set "DVC In" 100%
 *
 * You can use Mute
 *
 *	amixer set "DVC Out Mute" on
 *	amixer set "DVC In Mute" on
 *
 * You can use Volume Ramp
 *
 *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
 *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
 *	amixer set "DVC Out Ramp" on
 *	aplay xxx.wav &
 *	amixer set "DVC Out"  80%  // Volume Down
 *	amixer set "DVC Out" 100%  // Volume Up
 */

/dts-v1/;
#include "r8a7791.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	model = "Koelsch";
	compatible = "renesas,koelsch", "renesas,r8a7791";

	aliases {
		serial6 = &scif0;
		serial7 = &scif1;
	};

	chosen {
		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
		stdout-path = &scif0;
	};

	memory@40000000 {
		device_type = "memory";
		reg = <0 0x40000000 0 0x40000000>;
	};

	memory@200000000 {
		device_type = "memory";
		reg = <2 0x00000000 0 0x40000000>;
	};

	lbsc {
		#address-cells = <1>;
		#size-cells = <1>;
	};

	keyboard {
		compatible = "gpio-keys";

		key-1 {
			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_1>;
			label = "SW2-1";
			gpio-key,wakeup;
			debounce-interval = <20>;
		};
		key-2 {
			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_2>;
			label = "SW2-2";
			gpio-key,wakeup;
			debounce-interval = <20>;
		};
		key-3 {
			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_3>;
			label = "SW2-3";
			gpio-key,wakeup;
			debounce-interval = <20>;
		};
		key-4 {
			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_4>;
			label = "SW2-4";
			gpio-key,wakeup;
			debounce-interval = <20>;
		};
		key-a {
			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_A>;
			label = "SW30";
			gpio-key,wakeup;
			debounce-interval = <20>;
		};
		key-b {
			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_B>;
			label = "SW31";
			gpio-key,wakeup;
			debounce-interval = <20>;
		};
		key-c {
			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_C>;
			label = "SW32";
			gpio-key,wakeup;
			debounce-interval = <20>;
		};
		key-d {
			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_D>;
			label = "SW33";
			gpio-key,wakeup;
			debounce-interval = <20>;
		};
		key-e {
			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_E>;
			label = "SW34";
			gpio-key,wakeup;
			debounce-interval = <20>;
		};
		key-f {
			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_F>;
			label = "SW35";
			gpio-key,wakeup;
			debounce-interval = <20>;
		};
		key-g {
			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_G>;
			label = "SW36";
			gpio-key,wakeup;
			debounce-interval = <20>;
		};
	};

	leds {
		compatible = "gpio-leds";
		led6 {
			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
			label = "LED6";
		};
		led7 {
			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
			label = "LED7";
		};
		led8 {
			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
			label = "LED8";
		};
	};

	vcc_sdhi0: regulator@0 {
		compatible = "regulator-fixed";

		regulator-name = "SDHI0 Vcc";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	vccq_sdhi0: regulator@1 {
		compatible = "regulator-gpio";

		regulator-name = "SDHI0 VccQ";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <3300000>;

		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
		gpios-states = <1>;
		states = <3300000 1
			  1800000 0>;
	};

	vcc_sdhi1: regulator@2 {
		compatible = "regulator-fixed";

		regulator-name = "SDHI1 Vcc";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	vccq_sdhi1: regulator@3 {
		compatible = "regulator-gpio";

		regulator-name = "SDHI1 VccQ";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <3300000>;

		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
		gpios-states = <1>;
		states = <3300000 1
			  1800000 0>;
	};

	vcc_sdhi2: regulator@4 {
		compatible = "regulator-fixed";

		regulator-name = "SDHI2 Vcc";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	vccq_sdhi2: regulator@5 {
		compatible = "regulator-gpio";

		regulator-name = "SDHI2 VccQ";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <3300000>;

		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
		gpios-states = <1>;
		states = <3300000 1
			  1800000 0>;
	};

	sound {
		compatible = "simple-audio-card";

		simple-audio-card,format = "left_j";
		simple-audio-card,bitclock-master = <&sndcodec>;
		simple-audio-card,frame-master = <&sndcodec>;

		sndcpu: simple-audio-card,cpu {
			sound-dai = <&rcar_sound>;
		};

		sndcodec: simple-audio-card,codec {
			sound-dai = <&ak4643>;
			system-clock-frequency = <11289600>;
		};
	};
};

&du {
	pinctrl-0 = <&du_pins>;
	pinctrl-names = "default";
	status = "okay";

	ports {
		port@1 {
			lvds_connector: endpoint {
			};
		};
	};
};

&extal_clk {
	clock-frequency = <20000000>;
};

&pfc {
	i2c2_pins: i2c2 {
		renesas,groups = "i2c2";
		renesas,function = "i2c2";
	};

	du_pins: du {
		renesas,groups = "du_rgb666", "du_sync", "du_clk_out_0";
		renesas,function = "du";
	};

	scif0_pins: serial0 {
		renesas,groups = "scif0_data_d";
		renesas,function = "scif0";
	};

	scif1_pins: serial1 {
		renesas,groups = "scif1_data_d";
		renesas,function = "scif1";
	};

	ether_pins: ether {
		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
		renesas,function = "eth";
	};

	phy1_pins: phy1 {
		renesas,groups = "intc_irq0";
		renesas,function = "intc";
	};

	sdhi0_pins: sd0 {
		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
		renesas,function = "sdhi0";
	};

	sdhi1_pins: sd1 {
		renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
		renesas,function = "sdhi1";
	};

	sdhi2_pins: sd2 {
		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
		renesas,function = "sdhi2";
	};

	qspi_pins: spi0 {
		renesas,groups = "qspi_ctrl", "qspi_data4";
		renesas,function = "qspi";
	};

	msiof0_pins: spi1 {
		renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
				 "msiof0_tx";
		renesas,function = "msiof0";
	};

	usb0_pins: usb0 {
		renesas,groups = "usb0";
		renesas,function = "usb0";
	};

	usb1_pins: usb1 {
		renesas,groups = "usb1";
		renesas,function = "usb1";
	};

	vin1_pins: vin1 {
		renesas,groups = "vin1_data8", "vin1_clk";
		renesas,function = "vin1";
	};

	sound_pins: sound {
		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
		renesas,function = "ssi";
	};

	sound_clk_pins: sound_clk {
		renesas,groups = "audio_clk_a";
		renesas,function = "audio_clk";
	};
};

&ether {
	pinctrl-0 = <&ether_pins &phy1_pins>;
	pinctrl-names = "default";

	phy-handle = <&phy1>;
	renesas,ether-link-active-low;
	status = "ok";

	phy1: ethernet-phy@1 {
		reg = <1>;
		interrupt-parent = <&irqc0>;
		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
		micrel,led-mode = <1>;
	};
};

&cmt0 {
	status = "ok";
};

&sata0 {
	status = "okay";
};

&scif0 {
	pinctrl-0 = <&scif0_pins>;
	pinctrl-names = "default";

	status = "okay";
};

&scif1 {
	pinctrl-0 = <&scif1_pins>;
	pinctrl-names = "default";

	status = "okay";
};

&sdhi0 {
	pinctrl-0 = <&sdhi0_pins>;
	pinctrl-names = "default";

	vmmc-supply = <&vcc_sdhi0>;
	vqmmc-supply = <&vccq_sdhi0>;
	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
	status = "okay";
};

&sdhi1 {
	pinctrl-0 = <&sdhi1_pins>;
	pinctrl-names = "default";

	vmmc-supply = <&vcc_sdhi1>;
	vqmmc-supply = <&vccq_sdhi1>;
	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
	status = "okay";
};

&sdhi2 {
	pinctrl-0 = <&sdhi2_pins>;
	pinctrl-names = "default";

	vmmc-supply = <&vcc_sdhi2>;
	vqmmc-supply = <&vccq_sdhi2>;
	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&qspi {
	pinctrl-0 = <&qspi_pins>;
	pinctrl-names = "default";

	status = "okay";

	flash: flash@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "spansion,s25fl512s";
		reg = <0>;
		spi-max-frequency = <30000000>;
		spi-tx-bus-width = <4>;
		spi-rx-bus-width = <4>;
		m25p,fast-read;

		partition@0 {
			label = "loader";
			reg = <0x00000000 0x00080000>;
			read-only;
		};
		partition@80000 {
			label = "bootenv";
			reg = <0x00080000 0x00080000>;
			read-only;
		};
		partition@100000 {
			label = "data";
			reg = <0x00100000 0x03f00000>;
		};
	};
};

&msiof0 {
	pinctrl-0 = <&msiof0_pins>;
	pinctrl-names = "default";

	status = "okay";

	pmic: pmic@0 {
		compatible = "renesas,r2a11302ft";
		reg = <0>;
		spi-max-frequency = <6000000>;
		spi-cpol;
		spi-cpha;
	};
};

&i2c2 {
	pinctrl-0 = <&i2c2_pins>;
	pinctrl-names = "default";

	status = "okay";
	clock-frequency = <100000>;

	ak4643: sound-codec@12 {
		compatible = "asahi-kasei,ak4643";
		#sound-dai-cells = <0>;
		reg = <0x12>;
	};

	composite-in@20 {
		compatible = "adi,adv7180";
		reg = <0x20>;
		remote = <&vin1>;

		port {
			adv7180: endpoint {
				bus-width = <8>;
				remote-endpoint = <&vin1ep>;
			};
		};
	};

	eeprom@50 {
		compatible = "renesas,24c02";
		reg = <0x50>;
		pagesize = <16>;
	};
};

&i2c6 {
	status = "okay";
	clock-frequency = <100000>;

	vdd_dvfs: regulator@68 {
		compatible = "dlg,da9210";
		reg = <0x68>;

		regulator-min-microvolt = <1000000>;
		regulator-max-microvolt = <1000000>;
		regulator-boot-on;
		regulator-always-on;
	};
};

&pci0 {
	status = "okay";
	pinctrl-0 = <&usb0_pins>;
	pinctrl-names = "default";
};

&pci1 {
	status = "okay";
	pinctrl-0 = <&usb1_pins>;
	pinctrl-names = "default";
};

&hsusb {
	status = "okay";
	pinctrl-0 = <&usb0_pins>;
	pinctrl-names = "default";
	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
};

&usbphy {
	status = "okay";
};

&pcie_bus_clk {
	status = "okay";
};

&pciec {
	status = "okay";
};

&cpu0 {
	cpu0-supply = <&vdd_dvfs>;
};

/* composite video input */
&vin1 {
	status = "ok";
	pinctrl-0 = <&vin1_pins>;
	pinctrl-names = "default";

	port {
		#address-cells = <1>;
		#size-cells = <0>;

		vin1ep: endpoint {
			remote-endpoint = <&adv7180>;
			bus-width = <8>;
		};
	};
};

&rcar_sound {
	pinctrl-0 = <&sound_pins &sound_clk_pins>;
	pinctrl-names = "default";

	#sound-dai-cells = <0>;

	status = "okay";

	rcar_sound,dai {
		dai0 {
			playback = <&ssi0 &src2 &dvc0>;
			capture  = <&ssi1 &src3 &dvc1>;
		};
	};
};

&ssi1 {
	shared-pin;
};
Commit	Line	Data
1f52c659 HN	1	/*
	2	* Device Tree Source for the Koelsch board
	3	*
	4	* Copyright (C) 2013 Renesas Electronics Corporation
08e8f0f3 SS	5	* Copyright (C) 2013-2014 Renesas Solutions Corp.
08e8f0f3 SS	6	* Copyright (C) 2014 Cogent Embedded, Inc.
1f52c659 HN	7	*
	8	* This file is licensed under the terms of the GNU General Public License
	9	* version 2. This program is licensed "as is" without any warranty of any
	10	* kind, whether express or implied.
	11	*/
	12
b160f615 KM	13	/*
	14	* SSI-AK4643
	15	*
	16	* SW1: 1: AK4643
	17	* 2: CN22
	18	* 3: ADV7511
	19	*
	20	* This command is required when Playback/Capture
	21	*
	22	* amixer set "LINEOUT Mixer DACL" on
5c6d4b94 KM	23	* amixer set "DVC Out" 100%
	24	* amixer set "DVC In" 100%
	25	*
	26	* You can use Mute
	27	*
	28	* amixer set "DVC Out Mute" on
	29	* amixer set "DVC In Mute" on
ce474816 KM	30	*
	31	* You can use Volume Ramp
	32	*
	33	* amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
	34	* amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
	35	* amixer set "DVC Out Ramp" on
	36	* aplay xxx.wav &
	37	* amixer set "DVC Out" 80% // Volume Down
	38	* amixer set "DVC Out" 100% // Volume Up
b160f615 KM	39	*/
b160f615 KM	40
1f52c659	41	/dts-v1/;
31c46cbf	42	#include "r8a7791.dtsi"
f8e2535d	43	#include <dt-bindings/gpio/gpio.h>
7f168b1e	44	#include <dt-bindings/input/input.h>
1f52c659 HN	45
	46	/ {
	47	model = "Koelsch";
	48	compatible = "renesas,koelsch", "renesas,r8a7791";
	49
5ba55fa8 LP	50	aliases {
	51	serial6 = &scif0;
	52	serial7 = &scif1;
	53	};
	54
1f52c659	55	chosen {
79e69d17	56	bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
17323b36	57	stdout-path = &scif0;
1f52c659 HN	58	};
	59
	60	memory@40000000 {
	61	device_type = "memory";
4cd1bad4 TY	62	reg = <0 0x40000000 0 0x40000000>;
	63	};
	64
	65	memory@200000000 {
	66	device_type = "memory";
	67	reg = <2 0x00000000 0 0x40000000>;
1f52c659 HN	68	};
	69
	70	lbsc {
	71	#address-cells = <1>;
	72	#size-cells = <1>;
	73	};
f8e2535d	74
d3aaec83	75	keyboard {
aff5274f LP	76	compatible = "gpio-keys";
aff5274f LP	77
7f168b1e MD	78	key-1 {
	79	gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
	80	linux,code = <KEY_1>;
	81	label = "SW2-1";
	82	gpio-key,wakeup;
	83	debounce-interval = <20>;
	84	};
	85	key-2 {
	86	gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
	87	linux,code = <KEY_2>;
	88	label = "SW2-2";
	89	gpio-key,wakeup;
	90	debounce-interval = <20>;
	91	};
	92	key-3 {
	93	gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
	94	linux,code = <KEY_3>;
	95	label = "SW2-3";
	96	gpio-key,wakeup;
	97	debounce-interval = <20>;
	98	};
	99	key-4 {
	100	gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
	101	linux,code = <KEY_4>;
	102	label = "SW2-4";
	103	gpio-key,wakeup;
	104	debounce-interval = <20>;
	105	};
aff5274f LP	106	key-a {
aff5274f LP	107	gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
7f168b1e	108	linux,code = <KEY_A>;
aff5274f LP	109	label = "SW30";
	110	gpio-key,wakeup;
	111	debounce-interval = <20>;
	112	};
	113	key-b {
	114	gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
7f168b1e	115	linux,code = <KEY_B>;
aff5274f LP	116	label = "SW31";
	117	gpio-key,wakeup;
	118	debounce-interval = <20>;
	119	};
	120	key-c {
	121	gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
7f168b1e	122	linux,code = <KEY_C>;
aff5274f LP	123	label = "SW32";
	124	gpio-key,wakeup;
	125	debounce-interval = <20>;
	126	};
	127	key-d {
	128	gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
7f168b1e	129	linux,code = <KEY_D>;
aff5274f LP	130	label = "SW33";
	131	gpio-key,wakeup;
	132	debounce-interval = <20>;
	133	};
	134	key-e {
	135	gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
7f168b1e	136	linux,code = <KEY_E>;
aff5274f LP	137	label = "SW34";
	138	gpio-key,wakeup;
	139	debounce-interval = <20>;
	140	};
	141	key-f {
	142	gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
7f168b1e	143	linux,code = <KEY_F>;
aff5274f LP	144	label = "SW35";
	145	gpio-key,wakeup;
	146	debounce-interval = <20>;
	147	};
	148	key-g {
	149	gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
7f168b1e	150	linux,code = <KEY_G>;
aff5274f LP	151	label = "SW36";
	152	gpio-key,wakeup;
	153	debounce-interval = <20>;
	154	};
	155	};
	156
f8e2535d LP	157	leds {
	158	compatible = "gpio-leds";
	159	led6 {
	160	gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
352faa5f	161	label = "LED6";
f8e2535d LP	162	};
	163	led7 {
	164	gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
352faa5f	165	label = "LED7";
f8e2535d LP	166	};
	167	led8 {
	168	gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
352faa5f	169	label = "LED8";
f8e2535d LP	170	};
f8e2535d LP	171	};
2c60a7df MD	172
	173	vcc_sdhi0: regulator@0 {
	174	compatible = "regulator-fixed";
	175
	176	regulator-name = "SDHI0 Vcc";
	177	regulator-min-microvolt = <3300000>;
	178	regulator-max-microvolt = <3300000>;
	179
	180	gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
	181	enable-active-high;
	182	};
	183
	184	vccq_sdhi0: regulator@1 {
	185	compatible = "regulator-gpio";
	186
	187	regulator-name = "SDHI0 VccQ";
	188	regulator-min-microvolt = <1800000>;
	189	regulator-max-microvolt = <3300000>;
	190
	191	gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
	192	gpios-states = <1>;
	193	states = <3300000 1
	194	1800000 0>;
	195	};
	196
	197	vcc_sdhi1: regulator@2 {
	198	compatible = "regulator-fixed";
	199
	200	regulator-name = "SDHI1 Vcc";
	201	regulator-min-microvolt = <3300000>;
	202	regulator-max-microvolt = <3300000>;
	203
	204	gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
	205	enable-active-high;
	206	};
	207
	208	vccq_sdhi1: regulator@3 {
	209	compatible = "regulator-gpio";
	210
	211	regulator-name = "SDHI1 VccQ";
	212	regulator-min-microvolt = <1800000>;
	213	regulator-max-microvolt = <3300000>;
	214
	215	gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
	216	gpios-states = <1>;
	217	states = <3300000 1
	218	1800000 0>;
	219	};
	220
	221	vcc_sdhi2: regulator@4 {
	222	compatible = "regulator-fixed";
	223
	224	regulator-name = "SDHI2 Vcc";
	225	regulator-min-microvolt = <3300000>;
	226	regulator-max-microvolt = <3300000>;
	227
	228	gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
	229	enable-active-high;
	230	};
	231
	232	vccq_sdhi2: regulator@5 {
	233	compatible = "regulator-gpio";
	234
	235	regulator-name = "SDHI2 VccQ";
236	regulator-min-microvolt = <1800000>;
237	regulator-max-microvolt = <3300000>;
238
239	gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
240	gpios-states = <1>;
241	states = <3300000 1
242	1800000 0>;
243	};
b160f615 KM	244
	245	sound {
	246	compatible = "simple-audio-card";
	247
	248	simple-audio-card,format = "left_j";
	249	simple-audio-card,bitclock-master = <&sndcodec>;
	250	simple-audio-card,frame-master = <&sndcodec>;
	251
	252	sndcpu: simple-audio-card,cpu {
	253	sound-dai = <&rcar_sound>;
	254	};
	255
	256	sndcodec: simple-audio-card,codec {
	257	sound-dai = <&ak4643>;
	258	system-clock-frequency = <11289600>;
	259	};
	260	};
f8e2535d LP	261	};
f8e2535d LP	262
0ee56d40 LP	263	&du {
	264	pinctrl-0 = <&du_pins>;
	265	pinctrl-names = "default";
	266	status = "okay";
	267
	268	ports {
	269	port@1 {
	270	lvds_connector: endpoint {
	271	};
	272	};
	273	};
	274	};
	275
fcf0c725 LP	276	&extal_clk {
	277	clock-frequency = <20000000>;
	278	};
	279
f8e2535d	280	&pfc {
e6a4c001	281	i2c2_pins: i2c2 {
38c53516 WS	282	renesas,groups = "i2c2";
	283	renesas,function = "i2c2";
	284	};
	285
afba941c LP	286	du_pins: du {
	287	renesas,groups = "du_rgb666", "du_sync", "du_clk_out_0";
	288	renesas,function = "du";
	289	};
	290
f8e2535d LP	291	scif0_pins: serial0 {
	292	renesas,groups = "scif0_data_d";
	293	renesas,function = "scif0";
	294	};
	295
	296	scif1_pins: serial1 {
	297	renesas,groups = "scif1_data_d";
	298	renesas,function = "scif1";
	299	};
e02ee513	300
08e8f0f3 SS	301	ether_pins: ether {
	302	renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
	303	renesas,function = "eth";
	304	};
	305
	306	phy1_pins: phy1 {
	307	renesas,groups = "intc_irq0";
	308	renesas,function = "intc";
	309	};
	310
2c60a7df	311	sdhi0_pins: sd0 {
d5dda038	312	renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
2c60a7df MD	313	renesas,function = "sdhi0";
	314	};
	315
	316	sdhi1_pins: sd1 {
d5dda038	317	renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
2c60a7df MD	318	renesas,function = "sdhi1";
	319	};
	320
	321	sdhi2_pins: sd2 {
d5dda038	322	renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
2c60a7df MD	323	renesas,function = "sdhi2";
	324	};
	325
6f3e4ee3	326	qspi_pins: spi0 {
e02ee513 GU	327	renesas,groups = "qspi_ctrl", "qspi_data4";
	328	renesas,function = "qspi";
	329	};
b16f05ab GU	330
	331	msiof0_pins: spi1 {
	332	renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
	333	"msiof0_tx";
	334	renesas,function = "msiof0";
	335	};
1d41f36a	336
7540aeb0 SS	337	usb0_pins: usb0 {
	338	renesas,groups = "usb0";
	339	renesas,function = "usb0";
	340	};
	341
	342	usb1_pins: usb1 {
	343	renesas,groups = "usb1";
	344	renesas,function = "usb1";
	345	};
2cf08810	346
	347	vin1_pins: vin1 {
	348	renesas,groups = "vin1_data8", "vin1_clk";
	349	renesas,function = "vin1";
	350	};
b160f615 KM	351
	352	sound_pins: sound {
	353	renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
	354	renesas,function = "ssi";
	355	};
	356
	357	sound_clk_pins: sound_clk {
	358	renesas,groups = "audio_clk_a";
	359	renesas,function = "audio_clk";
	360	};
1f52c659	361	};
760c277b	362
08e8f0f3 SS	363	&ether {
	364	pinctrl-0 = <&ether_pins &phy1_pins>;
	365	pinctrl-names = "default";
	366
	367	phy-handle = <&phy1>;
	368	renesas,ether-link-active-low;
	369	status = "ok";
	370
	371	phy1: ethernet-phy@1 {
	372	reg = <1>;
	373	interrupt-parent = <&irqc0>;
	374	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
19f647cb	375	micrel,led-mode = <1>;
08e8f0f3 SS	376	};
	377	};
	378
6a1d9460 LP	379	&cmt0 {
	380	status = "ok";
	381	};
	382
760c277b VB	383	&sata0 {
	384	status = "okay";
	385	};
e02ee513	386
5ba55fa8 LP	387	&scif0 {
	388	pinctrl-0 = <&scif0_pins>;
	389	pinctrl-names = "default";
	390
	391	status = "okay";
	392	};
	393
	394	&scif1 {
	395	pinctrl-0 = <&scif1_pins>;
	396	pinctrl-names = "default";
	397
	398	status = "okay";
	399	};
	400
2c60a7df MD	401	&sdhi0 {
	402	pinctrl-0 = <&sdhi0_pins>;
	403	pinctrl-names = "default";
	404
	405	vmmc-supply = <&vcc_sdhi0>;
	406	vqmmc-supply = <&vccq_sdhi0>;
	407	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
	408	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
	409	status = "okay";
	410	};
	411
	412	&sdhi1 {
	413	pinctrl-0 = <&sdhi1_pins>;
	414	pinctrl-names = "default";
	415
	416	vmmc-supply = <&vcc_sdhi1>;
	417	vqmmc-supply = <&vccq_sdhi1>;
	418	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
	419	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
	420	status = "okay";
	421	};
	422
	423	&sdhi2 {
	424	pinctrl-0 = <&sdhi2_pins>;
	425	pinctrl-names = "default";
	426
	427	vmmc-supply = <&vcc_sdhi2>;
	428	vqmmc-supply = <&vccq_sdhi2>;
	429	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
	430	status = "okay";
	431	};
	432
6f3e4ee3	433	&qspi {
e02ee513 GU	434	pinctrl-0 = <&qspi_pins>;
	435	pinctrl-names = "default";
	436
	437	status = "okay";
	438
	439	flash: flash@0 {
	440	#address-cells = <1>;
	441	#size-cells = <1>;
	442	compatible = "spansion,s25fl512s";
	443	reg = <0>;
	444	spi-max-frequency = <30000000>;
ed56083a GU	445	spi-tx-bus-width = <4>;
ed56083a GU	446	spi-rx-bus-width = <4>;
e02ee513 GU	447	m25p,fast-read;
	448
	449	partition@0 {
	450	label = "loader";
	451	reg = <0x00000000 0x00080000>;
	452	read-only;
	453	};
	454	partition@80000 {
	455	label = "bootenv";
	456	reg = <0x00080000 0x00080000>;
	457	read-only;
	458	};
	459	partition@100000 {
	460	label = "data";
	461	reg = <0x00100000 0x03f00000>;
	462	};
	463	};
	464	};
b16f05ab GU	465
	466	&msiof0 {
	467	pinctrl-0 = <&msiof0_pins>;
	468	pinctrl-names = "default";
	469
	470	status = "okay";
	471
	472	pmic: pmic@0 {
	473	compatible = "renesas,r2a11302ft";
	474	reg = <0>;
	475	spi-max-frequency = <6000000>;
	476	spi-cpol;
	477	spi-cpha;
	478	};
	479	};
1d41f36a	480
897dfdbc SH	481	&i2c2 {
	482	pinctrl-0 = <&i2c2_pins>;
	483	pinctrl-names = "default";
	484
	485	status = "okay";
a8d943ed	486	clock-frequency = <100000>;
897dfdbc	487
b160f615 KM	488	ak4643: sound-codec@12 {
	489	compatible = "asahi-kasei,ak4643";
	490	#sound-dai-cells = <0>;
	491	reg = <0x12>;
	492	};
897dfdbc	493
2cf08810	494	composite-in@20 {
	495	compatible = "adi,adv7180";
	496	reg = <0x20>;
	497	remote = <&vin1>;
	498
	499	port {
	500	adv7180: endpoint {
	501	bus-width = <8>;
	502	remote-endpoint = <&vin1ep>;
	503	};
	504	};
	505	};
	506
897dfdbc SH	507	eeprom@50 {
	508	compatible = "renesas,24c02";
	509	reg = <0x50>;
	510	pagesize = <16>;
	511	};
	512	};
	513
1d41f36a	514	&i2c6 {
1d41f36a	515	status = "okay";
897dfdbc	516	clock-frequency = <100000>;
1d41f36a GI	517
1d41f36a GI	518	vdd_dvfs: regulator@68 {
bd597f47	519	compatible = "dlg,da9210";
1d41f36a GI	520	reg = <0x68>;
	521
	522	regulator-min-microvolt = <1000000>;
	523	regulator-max-microvolt = <1000000>;
	524	regulator-boot-on;
	525	regulator-always-on;
	526	};
	527	};
a57004ec	528
7540aeb0 SS	529	&pci0 {
	530	status = "okay";
	531	pinctrl-0 = <&usb0_pins>;
	532	pinctrl-names = "default";
	533	};
	534
	535	&pci1 {
	536	status = "okay";
	537	pinctrl-0 = <&usb1_pins>;
	538	pinctrl-names = "default";
	539	};
	540
fc4a00b7 YS	541	&hsusb {
	542	status = "okay";
	543	pinctrl-0 = <&usb0_pins>;
	544	pinctrl-names = "default";
	545	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
	546	};
	547
dc80d8bc SS	548	&usbphy {
	549	status = "okay";
	550	};
	551
998d7d64 PE	552	&pcie_bus_clk {
	553	status = "okay";
	554	};
	555
	556	&pciec {
	557	status = "okay";
	558	};
	559
a57004ec GI	560	&cpu0 {
	561	cpu0-supply = <&vdd_dvfs>;
	562	};
2cf08810	563
	564	/* composite video input */
	565	&vin1 {
	566	status = "ok";
	567	pinctrl-0 = <&vin1_pins>;
	568	pinctrl-names = "default";
	569
	570	port {
	571	#address-cells = <1>;
	572	#size-cells = <0>;
	573
	574	vin1ep: endpoint {
	575	remote-endpoint = <&adv7180>;
	576	bus-width = <8>;
	577	};
	578	};
	579	};
b160f615 KM	580
	581	&rcar_sound {
	582	pinctrl-0 = <&sound_pins &sound_clk_pins>;
	583	pinctrl-names = "default";
	584
	585	#sound-dai-cells = <0>;
	586
	587	status = "okay";
	588
	589	rcar_sound,dai {
	590	dai0 {
5c6d4b94 KM	591	playback = <&ssi0 &src2 &dvc0>;
5c6d4b94 KM	592	capture = <&ssi1 &src3 &dvc1>;
b160f615 KM	593	};
	594	};
	595	};
	596
b160f615	597	&ssi1 {
b160f615 KM	598	shared-pin;
b160f615 KM	599	};