[linux-2.6-block.git] / arch / arm / boot / dts / qcom-msm8974.dtsi

/dts-v1/;

#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
#include "skeleton.dtsi"

/ {
	model = "Qualcomm MSM8974";
	compatible = "qcom,msm8974";
	interrupt-parent = <&intc>;

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;
		interrupts = <1 9 0xf04>;

		cpu@0 {
			compatible = "qcom,krait";
			enable-method = "qcom,kpss-acc-v2";
			device_type = "cpu";
			reg = <0>;
			next-level-cache = <&L2>;
			qcom,acc = <&acc0>;
			qcom,saw = <&saw0>;
			cpu-idle-states = <&CPU_SPC>;
		};

		cpu@1 {
			compatible = "qcom,krait";
			enable-method = "qcom,kpss-acc-v2";
			device_type = "cpu";
			reg = <1>;
			next-level-cache = <&L2>;
			qcom,acc = <&acc1>;
			qcom,saw = <&saw1>;
			cpu-idle-states = <&CPU_SPC>;
		};

		cpu@2 {
			compatible = "qcom,krait";
			enable-method = "qcom,kpss-acc-v2";
			device_type = "cpu";
			reg = <2>;
			next-level-cache = <&L2>;
			qcom,acc = <&acc2>;
			qcom,saw = <&saw2>;
			cpu-idle-states = <&CPU_SPC>;
		};

		cpu@3 {
			compatible = "qcom,krait";
			enable-method = "qcom,kpss-acc-v2";
			device_type = "cpu";
			reg = <3>;
			next-level-cache = <&L2>;
			qcom,acc = <&acc3>;
			qcom,saw = <&saw3>;
			cpu-idle-states = <&CPU_SPC>;
		};

		L2: l2-cache {
			compatible = "cache";
			cache-level = <2>;
			qcom,saw = <&saw_l2>;
		};

		idle-states {
			CPU_SPC: spc {
				compatible = "qcom,idle-state-spc",
						"arm,idle-state";
				entry-latency-us = <150>;
				exit-latency-us = <200>;
				min-residency-us = <2000>;
			};
		};
	};

	cpu-pmu {
		compatible = "qcom,krait-pmu";
		interrupts = <1 7 0xf04>;
	};

	timer {
		compatible = "arm,armv7-timer";
		interrupts = <1 2 0xf08>,
			     <1 3 0xf08>,
			     <1 4 0xf08>,
			     <1 1 0xf08>;
		clock-frequency = <19200000>;
	};

	soc: soc {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;
		compatible = "simple-bus";

		intc: interrupt-controller@f9000000 {
			compatible = "qcom,msm-qgic2";
			interrupt-controller;
			#interrupt-cells = <3>;
			reg = <0xf9000000 0x1000>,
			      <0xf9002000 0x1000>;
		};

		timer@f9020000 {
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;
			compatible = "arm,armv7-timer-mem";
			reg = <0xf9020000 0x1000>;
			clock-frequency = <19200000>;

			frame@f9021000 {
				frame-number = <0>;
				interrupts = <0 8 0x4>,
					     <0 7 0x4>;
				reg = <0xf9021000 0x1000>,
				      <0xf9022000 0x1000>;
			};

			frame@f9023000 {
				frame-number = <1>;
				interrupts = <0 9 0x4>;
				reg = <0xf9023000 0x1000>;
				status = "disabled";
			};

			frame@f9024000 {
				frame-number = <2>;
				interrupts = <0 10 0x4>;
				reg = <0xf9024000 0x1000>;
				status = "disabled";
			};

			frame@f9025000 {
				frame-number = <3>;
				interrupts = <0 11 0x4>;
				reg = <0xf9025000 0x1000>;
				status = "disabled";
			};

			frame@f9026000 {
				frame-number = <4>;
				interrupts = <0 12 0x4>;
				reg = <0xf9026000 0x1000>;
				status = "disabled";
			};

			frame@f9027000 {
				frame-number = <5>;
				interrupts = <0 13 0x4>;
				reg = <0xf9027000 0x1000>;
				status = "disabled";
			};

			frame@f9028000 {
				frame-number = <6>;
				interrupts = <0 14 0x4>;
				reg = <0xf9028000 0x1000>;
				status = "disabled";
			};
		};

		saw0: power-controller@f9089000 {
			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
		};

		saw1: power-controller@f9099000 {
			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
		};

		saw2: power-controller@f90a9000 {
			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
		};

		saw3: power-controller@f90b9000 {
			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
		};

		saw_l2: power-controller@f9012000 {
			compatible = "qcom,saw2";
			reg = <0xf9012000 0x1000>;
			regulator;
		};

		acc0: clock-controller@f9088000 {
			compatible = "qcom,kpss-acc-v2";
			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
		};

		acc1: clock-controller@f9098000 {
			compatible = "qcom,kpss-acc-v2";
			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
		};

		acc2: clock-controller@f90a8000 {
			compatible = "qcom,kpss-acc-v2";
			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
		};

		acc3: clock-controller@f90b8000 {
			compatible = "qcom,kpss-acc-v2";
			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
		};

		restart@fc4ab000 {
			compatible = "qcom,pshold";
			reg = <0xfc4ab000 0x4>;
		};

		gcc: clock-controller@fc400000 {
			compatible = "qcom,gcc-msm8974";
			#clock-cells = <1>;
			#reset-cells = <1>;
			reg = <0xfc400000 0x4000>;
		};

		tcsr_mutex_block: syscon@fd484000 {
			compatible = "syscon";
			reg = <0xfd484000 0x2000>;
		};

		mmcc: clock-controller@fd8c0000 {
			compatible = "qcom,mmcc-msm8974";
			#clock-cells = <1>;
			#reset-cells = <1>;
			reg = <0xfd8c0000 0x6000>;
		};

		tcsr_mutex: tcsr-mutex {
			compatible = "qcom,tcsr-mutex";
			syscon = <&tcsr_mutex_block 0 0x80>;

			#hwlock-cells = <1>;
		};

		serial@f991e000 {
			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
			reg = <0xf991e000 0x1000>;
			interrupts = <0 108 0x0>;
			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			status = "disabled";
		};

		sdhci@f9824900 {
			compatible = "qcom,sdhci-msm-v4";
			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
			reg-names = "hc_mem", "core_mem";
			interrupts = <0 123 0>, <0 138 0>;
			interrupt-names = "hc_irq", "pwr_irq";
			clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
			clock-names = "core", "iface";
			status = "disabled";
		};

		sdhci@f98a4900 {
			compatible = "qcom,sdhci-msm-v4";
			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
			reg-names = "hc_mem", "core_mem";
			interrupts = <0 125 0>, <0 221 0>;
			interrupt-names = "hc_irq", "pwr_irq";
			clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
			clock-names = "core", "iface";
			status = "disabled";
		};

		rng@f9bff000 {
			compatible = "qcom,prng";
			reg = <0xf9bff000 0x200>;
			clocks = <&gcc GCC_PRNG_AHB_CLK>;
			clock-names = "core";
		};

		msmgpio: pinctrl@fd510000 {
			compatible = "qcom,msm8974-pinctrl";
			reg = <0xfd510000 0x4000>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
			interrupts = <0 208 0>;
		};

		blsp_i2c11: i2c@f9967000 {
			status = "disable";
			compatible = "qcom,i2c-qup-v2.1.1";
			reg = <0xf9967000 0x1000>;
			interrupts = <0 105 IRQ_TYPE_NONE>;
			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
			clock-names = "core", "iface";
			#address-cells = <1>;
			#size-cells = <0>;
		};

		spmi_bus: spmi@fc4cf000 {
			compatible = "qcom,spmi-pmic-arb";
			reg-names = "core", "intr", "cnfg";
			reg = <0xfc4cf000 0x1000>,
			      <0xfc4cb000 0x1000>,
			      <0xfc4ca000 0x1000>;
			interrupt-names = "periph_irq";
			interrupts = <0 190 0>;
			qcom,ee = <0>;
			qcom,channel = <0>;
			#address-cells = <2>;
			#size-cells = <0>;
			interrupt-controller;
			#interrupt-cells = <4>;
		};
	};
};
Commit	Line	Data
2aec37c6 RV	1	/dts-v1/;
2aec37c6 RV	2
bf7f6b04	3	#include <dt-bindings/interrupt-controller/irq.h>
3933d267	4	#include <dt-bindings/clock/qcom,gcc-msm8974.h>
bf7f6b04	5	#include "skeleton.dtsi"
3933d267	6
2aec37c6 RV	7	/ {
	8	model = "Qualcomm MSM8974";
	9	compatible = "qcom,msm8974";
	10	interrupt-parent = <&intc>;
	11
2ab27991 RV	12	cpus {
	13	#address-cells = <1>;
	14	#size-cells = <0>;
	15	interrupts = <1 9 0xf04>;
2ab27991 RV	16
2ab27991 RV	17	cpu@0 {
ba08220a KG	18	compatible = "qcom,krait";
ba08220a KG	19	enable-method = "qcom,kpss-acc-v2";
2ab27991 RV	20	device_type = "cpu";
	21	reg = <0>;
	22	next-level-cache = <&L2>;
	23	qcom,acc = <&acc0>;
8c76a638	24	qcom,saw = <&saw0>;
d596d620	25	cpu-idle-states = <&CPU_SPC>;
2ab27991 RV	26	};
	27
	28	cpu@1 {
ba08220a KG	29	compatible = "qcom,krait";
ba08220a KG	30	enable-method = "qcom,kpss-acc-v2";
2ab27991 RV	31	device_type = "cpu";
	32	reg = <1>;
	33	next-level-cache = <&L2>;
	34	qcom,acc = <&acc1>;
8c76a638	35	qcom,saw = <&saw1>;
d596d620	36	cpu-idle-states = <&CPU_SPC>;
2ab27991 RV	37	};
	38
	39	cpu@2 {
ba08220a KG	40	compatible = "qcom,krait";
ba08220a KG	41	enable-method = "qcom,kpss-acc-v2";
2ab27991 RV	42	device_type = "cpu";
	43	reg = <2>;
	44	next-level-cache = <&L2>;
	45	qcom,acc = <&acc2>;
8c76a638	46	qcom,saw = <&saw2>;
d596d620	47	cpu-idle-states = <&CPU_SPC>;
2ab27991 RV	48	};
	49
	50	cpu@3 {
ba08220a KG	51	compatible = "qcom,krait";
ba08220a KG	52	enable-method = "qcom,kpss-acc-v2";
2ab27991 RV	53	device_type = "cpu";
	54	reg = <3>;
	55	next-level-cache = <&L2>;
	56	qcom,acc = <&acc3>;
8c76a638	57	qcom,saw = <&saw3>;
d596d620	58	cpu-idle-states = <&CPU_SPC>;
2ab27991 RV	59	};
	60
	61	L2: l2-cache {
	62	compatible = "cache";
	63	cache-level = <2>;
2ab27991 RV	64	qcom,saw = <&saw_l2>;
2ab27991 RV	65	};
d596d620 LI	66
	67	idle-states {
	68	CPU_SPC: spc {
	69	compatible = "qcom,idle-state-spc",
	70	"arm,idle-state";
	71	entry-latency-us = <150>;
	72	exit-latency-us = <200>;
	73	min-residency-us = <2000>;
	74	};
	75	};
2ab27991 RV	76	};
2ab27991 RV	77
3bff5474 SB	78	cpu-pmu {
	79	compatible = "qcom,krait-pmu";
	80	interrupts = <1 7 0xf04>;
	81	};
	82
ba08220a KG	83	timer {
	84	compatible = "arm,armv7-timer";
	85	interrupts = <1 2 0xf08>,
	86	<1 3 0xf08>,
	87	<1 4 0xf08>,
	88	<1 1 0xf08>;
	89	clock-frequency = <19200000>;
	90	};
	91
2aec37c6 RV	92	soc: soc {
	93	#address-cells = <1>;
	94	#size-cells = <1>;
	95	ranges;
	96	compatible = "simple-bus";
	97
	98	intc: interrupt-controller@f9000000 {
	99	compatible = "qcom,msm-qgic2";
	100	interrupt-controller;
	101	#interrupt-cells = <3>;
	102	reg = <0xf9000000 0x1000>,
	103	<0xf9002000 0x1000>;
	104	};
	105
47c5a5d6 SB	106	timer@f9020000 {
	107	#address-cells = <1>;
	108	#size-cells = <1>;
	109	ranges;
	110	compatible = "arm,armv7-timer-mem";
	111	reg = <0xf9020000 0x1000>;
	112	clock-frequency = <19200000>;
	113
	114	frame@f9021000 {
	115	frame-number = <0>;
	116	interrupts = <0 8 0x4>,
	117	<0 7 0x4>;
	118	reg = <0xf9021000 0x1000>,
	119	<0xf9022000 0x1000>;
	120	};
	121
	122	frame@f9023000 {
	123	frame-number = <1>;
	124	interrupts = <0 9 0x4>;
	125	reg = <0xf9023000 0x1000>;
	126	status = "disabled";
	127	};
	128
	129	frame@f9024000 {
	130	frame-number = <2>;
	131	interrupts = <0 10 0x4>;
	132	reg = <0xf9024000 0x1000>;
	133	status = "disabled";
	134	};
	135
	136	frame@f9025000 {
	137	frame-number = <3>;
	138	interrupts = <0 11 0x4>;
	139	reg = <0xf9025000 0x1000>;
	140	status = "disabled";
	141	};
	142
	143	frame@f9026000 {
	144	frame-number = <4>;
	145	interrupts = <0 12 0x4>;
	146	reg = <0xf9026000 0x1000>;
	147	status = "disabled";
	148	};
	149
	150	frame@f9027000 {
	151	frame-number = <5>;
	152	interrupts = <0 13 0x4>;
	153	reg = <0xf9027000 0x1000>;
	154	status = "disabled";
	155	};
	156
	157	frame@f9028000 {
	158	frame-number = <6>;
	159	interrupts = <0 14 0x4>;
	160	reg = <0xf9028000 0x1000>;
	161	status = "disabled";
	162	};
	163	};
	164
8c76a638 LI	165	saw0: power-controller@f9089000 {
	166	compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
	167	reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
	168	};
	169
	170	saw1: power-controller@f9099000 {
	171	compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
	172	reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
	173	};
	174
	175	saw2: power-controller@f90a9000 {
	176	compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
	177	reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
	178	};
	179
	180	saw3: power-controller@f90b9000 {
	181	compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
	182	reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
	183	};
	184
	185	saw_l2: power-controller@f9012000 {
2ab27991 RV	186	compatible = "qcom,saw2";
	187	reg = <0xf9012000 0x1000>;
	188	regulator;
	189	};
	190
	191	acc0: clock-controller@f9088000 {
	192	compatible = "qcom,kpss-acc-v2";
	193	reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
	194	};
	195
	196	acc1: clock-controller@f9098000 {
	197	compatible = "qcom,kpss-acc-v2";
	198	reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
	199	};
	200
	201	acc2: clock-controller@f90a8000 {
	202	compatible = "qcom,kpss-acc-v2";
	203	reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
	204	};
	205
	206	acc3: clock-controller@f90b8000 {
	207	compatible = "qcom,kpss-acc-v2";
	208	reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
	209	};
	210
74e848f6 SB	211	restart@fc4ab000 {
	212	compatible = "qcom,pshold";
	213	reg = <0xfc4ab000 0x4>;
	214	};
3933d267 SB	215
	216	gcc: clock-controller@fc400000 {
	217	compatible = "qcom,gcc-msm8974";
	218	#clock-cells = <1>;
	219	#reset-cells = <1>;
	220	reg = <0xfc400000 0x4000>;
	221	};
	222
b4e745e1 BA	223	tcsr_mutex_block: syscon@fd484000 {
	224	compatible = "syscon";
	225	reg = <0xfd484000 0x2000>;
	226	};
	227
3933d267 SB	228	mmcc: clock-controller@fd8c0000 {
	229	compatible = "qcom,mmcc-msm8974";
	230	#clock-cells = <1>;
	231	#reset-cells = <1>;
	232	reg = <0xfd8c0000 0x6000>;
	233	};
	234
b4e745e1 BA	235	tcsr_mutex: tcsr-mutex {
	236	compatible = "qcom,tcsr-mutex";
	237	syscon = <&tcsr_mutex_block 0 0x80>;
	238
	239	#hwlock-cells = <1>;
	240	};
	241
3933d267 SB	242	serial@f991e000 {
	243	compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
	244	reg = <0xf991e000 0x1000>;
	245	interrupts = <0 108 0x0>;
	246	clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
	247	clock-names = "core", "iface";
ba08220a	248	status = "disabled";
3933d267	249	};
19f4f8c1	250
3e944c76 GD	251	sdhci@f9824900 {
	252	compatible = "qcom,sdhci-msm-v4";
	253	reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
	254	reg-names = "hc_mem", "core_mem";
	255	interrupts = <0 123 0>, <0 138 0>;
	256	interrupt-names = "hc_irq", "pwr_irq";
	257	clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
	258	clock-names = "core", "iface";
	259	status = "disabled";
	260	};
	261
	262	sdhci@f98a4900 {
	263	compatible = "qcom,sdhci-msm-v4";
	264	reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
	265	reg-names = "hc_mem", "core_mem";
	266	interrupts = <0 125 0>, <0 221 0>;
	267	interrupt-names = "hc_irq", "pwr_irq";
	268	clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
	269	clock-names = "core", "iface";
	270	status = "disabled";
	271	};
	272
19f4f8c1 SV	273	rng@f9bff000 {
	274	compatible = "qcom,prng";
	275	reg = <0xf9bff000 0x200>;
	276	clocks = <&gcc GCC_PRNG_AHB_CLK>;
	277	clock-names = "core";
	278	};
7d7db8db II	279
	280	msmgpio: pinctrl@fd510000 {
	281	compatible = "qcom,msm8974-pinctrl";
	282	reg = <0xfd510000 0x4000>;
	283	gpio-controller;
	284	#gpio-cells = <2>;
	285	interrupt-controller;
	286	#interrupt-cells = <2>;
	287	interrupts = <0 208 0>;
7d7db8db	288	};
bf7f6b04	289
	290	blsp_i2c11: i2c@f9967000 {
	291	status = "disable";
	292	compatible = "qcom,i2c-qup-v2.1.1";
	293	reg = <0xf9967000 0x1000>;
	294	interrupts = <0 105 IRQ_TYPE_NONE>;
	295	clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
	296	clock-names = "core", "iface";
	297	#address-cells = <1>;
	298	#size-cells = <0>;
	299	};
af22e46d II	300
	301	spmi_bus: spmi@fc4cf000 {
	302	compatible = "qcom,spmi-pmic-arb";
	303	reg-names = "core", "intr", "cnfg";
	304	reg = <0xfc4cf000 0x1000>,
	305	<0xfc4cb000 0x1000>,
	306	<0xfc4ca000 0x1000>;
	307	interrupt-names = "periph_irq";
	308	interrupts = <0 190 0>;
	309	qcom,ee = <0>;
	310	qcom,channel = <0>;
	311	#address-cells = <2>;
	312	#size-cells = <0>;
	313	interrupt-controller;
	314	#interrupt-cells = <4>;
	315	};
2aec37c6 RV	316	};
2aec37c6 RV	317	};