projects / linux-2.6-block.git / blame
| Commit | Line | Data |
|---|---|---|
| 05773878 JE |
1 | /* |
| 2 | * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com> | |
| 3 | * | |
| 4 | * This program is free software; you can redistribute it and/or modify | |
| 5 | * it under the terms of the GNU General Public License version 2 as | |
| 6 | * published by the Free Software Foundation. | |
| 7 | */ | |
| 8 | ||
| 9 | / { | |
| 10 | /* regulator for wl12xx on sdio4 */ | |
| 11 | wl12xx_vmmc: wl12xx_vmmc { | |
| 12 | pinctrl-names = "default"; | |
| 13 | pinctrl-0 = <&wl12xx_ctrl_pins>; | |
| 14 | compatible = "regulator-fixed"; | |
| 15 | regulator-name = "vwl1271"; | |
| 16 | regulator-min-microvolt = <1800000>; | |
| 17 | regulator-max-microvolt = <1800000>; | |
| 3a637e00 | 18 | gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; /* gpio 43 */ |
| 05773878 JE |
19 | startup-delay-us = <70000>; |
| 20 | enable-active-high; | |
| 21 | }; | |
| 22 | }; | |
| 23 | ||
| 24 | &omap4_pmx_core { | |
| 25 | uart2_pins: pinmux_uart2_pins { | |
| 26 | pinctrl-single,pins = < | |
| 27 | OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ | |
| 28 | OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ | |
| 29 | OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */ | |
| 30 | OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ | |
| 31 | >; | |
| 32 | }; | |
| 33 | ||
| 34 | wl12xx_ctrl_pins: pinmux_wl12xx_ctrl_pins { | |
| 35 | pinctrl-single,pins = < | |
| 36 | OMAP4_IOPAD(0x062, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a17.gpio_41 (WLAN_IRQ) */ | |
| 37 | OMAP4_IOPAD(0x064, PIN_OUTPUT | MUX_MODE3) /* gpmc_a18.gpio_42 (BT_EN) */ | |
| 38 | OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 (WLAN_EN) */ | |
| 39 | >; | |
| 40 | }; | |
| 41 | ||
| 42 | mmc4_pins: pinmux_mmc4_pins { | |
| 43 | pinctrl-single,pins = < | |
| 44 | OMAP4_IOPAD(0x154, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_clk.sdmmc4_clk */ | |
| 45 | OMAP4_IOPAD(0x156, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_simo.sdmmc4_cmd */ | |
| 46 | OMAP4_IOPAD(0x158, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_somi.sdmmc4_dat0 */ | |
| 47 | OMAP4_IOPAD(0x15e, PIN_INPUT_PULLUP | MUX_MODE1) /* uart4_tx.sdmmc4_dat1 */ | |
| 48 | OMAP4_IOPAD(0x15c, PIN_INPUT_PULLUP | MUX_MODE1) /* uart4_rx.sdmmc4_dat2 */ | |
| 49 | OMAP4_IOPAD(0x15a, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_cs0.sdmmc4_dat3 */ | |
| 50 | >; | |
| 51 | }; | |
| 52 | }; | |
| 53 | ||
| 54 | &uart2 { | |
| 55 | pinctrl-names = "default"; | |
| 56 | pinctrl-0 = <&uart2_pins>; | |
| 57 | status = "okay"; | |
| 58 | }; | |
| 59 | ||
| 60 | &mmc4 { | |
| 61 | pinctrl-names = "default"; | |
| 62 | pinctrl-0 = <&mmc4_pins>; | |
| 63 | vmmc-supply = <&wl12xx_vmmc>; | |
| 64 | non-removable; | |
| 65 | bus-width = <4>; | |
| 66 | cap-power-off-card; | |
| 67 | status = "okay"; | |
| 99f84cae EP |
68 | |
| 69 | #address-cells = <1>; | |
| 70 | #size-cells = <0>; | |
| 71 | wlcore: wlcore@2 { | |
| 72 | compatible = "ti,wl1271"; | |
| 73 | reg = <2>; | |
| 74 | interrupt-parent = <&gpio2>; | |
| 75 | interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */ | |
| 76 | ref-clock-frequency = <38400000>; | |
| 77 | }; | |
| 05773878 | 78 | }; |