[linux-2.6-block.git] / arch / arm / boot / dts / omap3-ldp.dts

/*
 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
/dts-v1/;

#include <dt-bindings/input/input.h>
#include "omap34xx.dtsi"
#include "omap-gpmc-smsc911x.dtsi"

/ {
	model = "TI OMAP3430 LDP (Zoom1 Labrador)";
	compatible = "ti,omap3-ldp", "ti,omap3";

	memory@80000000 {
		device_type = "memory";
		reg = <0x80000000 0x8000000>; /* 128 MB */
	};

	cpus {
		cpu@0 {
			cpu0-supply = <&vcc>;
		};
	};

	gpio_keys {
		compatible = "gpio-keys";
		pinctrl-names = "default";
		pinctrl-0 = <&gpio_key_pins>;

		key_enter {
			label = "enter";
			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
			linux,code = <KEY_ENTER>;
			wakeup-source;
		};

		key_f1 {
			label = "f1";
			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
			linux,code = <KEY_F1>;
			wakeup-source;
		};

		key_f2 {
			label = "f2";
			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
			linux,code = <KEY_F2>;
			wakeup-source;
		};

		key_f3 {
			label = "f3";
			gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
			linux,code = <KEY_F3>;
			wakeup-source;
		};

		key_f4 {
			label = "f4";
			gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
			linux,code = <KEY_F4>;
			wakeup-source;
		};

		key_left {
			label = "left";
			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
			linux,code = <KEY_LEFT>;
			wakeup-source;
		};

		key_right {
			label = "right";
			gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
			linux,code = <KEY_RIGHT>;
			wakeup-source;
		};

		key_up {
			label = "up";
			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
			linux,code = <KEY_UP>;
			wakeup-source;
		};

		key_down {
			label = "down";
			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
			linux,code = <KEY_DOWN>;
			wakeup-source;
		};
	};
};

&gpmc {
	ranges = <0 0 0x30000000 0x1000000>,	/* CS0 space, 16MB */
		 <1 0 0x08000000 0x1000000>;	/* CS1 space, 16MB */

	nand@0,0 {
		compatible = "ti,omap2-nand";
		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
		interrupt-parent = <&gpmc>;
		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
			     <1 IRQ_TYPE_NONE>;	/* termcount */
		linux,mtd-name= "micron,nand";
		nand-bus-width = <16>;
		gpmc,device-width = <2>;
		ti,nand-ecc-opt = "bch8";

		gpmc,sync-clk-ps = <0>;
		gpmc,cs-on-ns = <0>;
		gpmc,cs-rd-off-ns = <44>;
		gpmc,cs-wr-off-ns = <44>;
		gpmc,adv-on-ns = <6>;
		gpmc,adv-rd-off-ns = <34>;
		gpmc,adv-wr-off-ns = <44>;
		gpmc,we-off-ns = <40>;
		gpmc,oe-off-ns = <54>;
		gpmc,access-ns = <64>;
		gpmc,rd-cycle-ns = <82>;
		gpmc,wr-cycle-ns = <82>;
		gpmc,wr-access-ns = <40>;
		gpmc,wr-data-mux-bus-ns = <0>;

		#address-cells = <1>;
		#size-cells = <1>;

		partition@0 {
			label = "X-Loader";
			reg = <0 0x80000>;
		};
		partition@80000 {
			label = "U-Boot";
			reg = <0x80000 0x140000>;
		};
		partition@1c0000 {
			label = "Environment";
			reg = <0x1c0000 0x40000>;
		};
		partition@200000 {
			label = "Kernel";
			reg = <0x200000 0x1e00000>;
		};
		partition@2000000 {
			label = "Filesystem";
			reg = <0x2000000 0x6000000>;
		};
	};

	ethernet@gpmc {
		interrupt-parent = <&gpio5>;
		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
		reg = <1 0 0xff>;
	};
};

&i2c1 {
	clock-frequency = <2600000>;

	twl: twl@48 {
		reg = <0x48>;
		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
		interrupt-parent = <&intc>;

		twl_power: power {
			compatible = "ti,twl4030-power-idle";
			ti,use_poweroff;
		};
	};
};

#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
#include "omap3-panel-sharp-ls037v7dw01.dtsi"

&backlight0 {
	gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
};

&i2c2 {
	clock-frequency = <400000>;
};

&i2c3 {
	clock-frequency = <400000>;
};

/* tps61130rsa enabled by twl4030 regen */
&lcd_3v3 {
	regulator-always-on;
};

&lcd0 {
	enable-gpios = <&twl_gpio 15 GPIO_ACTIVE_HIGH>;	/* lcd INI */
	reset-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;	/* gpio55, lcd RESB */
	mode-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;	/* gpio56, lcd MO */
};

&mcspi1 {
	tsc2046@0 {
		interrupt-parent = <&gpio2>;
		interrupts = <22 0>;		/* gpio54 */
		pendown-gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
	};
};

&mmc1 {
	/* See 35xx errata 2.1.1.128 in SPRZ278F */
	compatible = "ti,omap3-pre-es3-hsmmc";
	vmmc-supply = <&vmmc1>;
	bus-width = <4>;
	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pins>;
};

&mmc2 {
	status="disabled";
};

&mmc3 {
	status="disabled";
};

&omap3_pmx_core {
	gpio_key_pins: pinmux_gpio_key_pins {
		pinctrl-single,pins = <
			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4)	/* cam_d2.gpio_101 */
			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4)	/* cam_d3.gpio_102 */
			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4)	/* cam_d4.gpio_103 */
			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4)	/* cam_d5.gpio_104 */
			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4)	/* cam_d6.gpio_105 */
			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4)	/* cam_d7.gpio_106 */
			OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4)	/* cam_d8.gpio_107 */
			OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4)	/* cam_d9.gpio_108 */
			OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4)	/* cam_d10.gpio_109 */
		>;
	};

	musb_pins: pinmux_musb_pins {
		pinctrl-single,pins = <
			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
		>;
	};

	mmc1_pins: pinmux_mmc1_pins {
		pinctrl-single,pins = <
			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.mmc1_dat0 */
			OMAP3_CORE1_IOPAD(0x214A, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.mmc1_dat1 */
			OMAP3_CORE1_IOPAD(0x214C, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.mmc1_dat2 */
			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.mmc1_dat3 */
		>;
	};
};

&twl_keypad {
	linux,keymap = <MATRIX_KEY(0, 0, KEY_1)
			MATRIX_KEY(0, 1, KEY_2)
			MATRIX_KEY(0, 2, KEY_3)
			MATRIX_KEY(1, 0, KEY_4)
			MATRIX_KEY(1, 1, KEY_5)
			MATRIX_KEY(1, 2, KEY_6)
			MATRIX_KEY(1, 3, KEY_F5)
			MATRIX_KEY(2, 0, KEY_7)
			MATRIX_KEY(2, 1, KEY_8)
			MATRIX_KEY(2, 2, KEY_9)
			MATRIX_KEY(2, 3, KEY_F6)
			MATRIX_KEY(3, 0, KEY_F7)
			MATRIX_KEY(3, 1, KEY_0)
			MATRIX_KEY(3, 2, KEY_F8)
			MATRIX_KEY(5, 4, KEY_RESERVED)
			MATRIX_KEY(4, 4, KEY_VOLUMEUP)
			MATRIX_KEY(5, 5, KEY_VOLUMEDOWN)>;
};

&uart3 {
	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
};

&usb_otg_hs {
	pinctrl-names = "default";
	pinctrl-0 = <&musb_pins>;
	interface-type = <0>;
	usb-phy = <&usb2_phy>;
	mode = <3>;
	power = <50>;
};

&vaux1 {
	/* Needed for ads7846 */
        regulator-name = "vcc";
};
Commit	Line	Data
bd5fc6fa TL	1	/*
	2	* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
	3	*
	4	* This program is free software; you can redistribute it and/or modify
	5	* it under the terms of the GNU General Public License version 2 as
	6	* published by the Free Software Foundation.
	7	*/
	8	/dts-v1/;
	9
edafb204	10	#include <dt-bindings/input/input.h>
bd5fc6fa TL	11	#include "omap34xx.dtsi"
	12	#include "omap-gpmc-smsc911x.dtsi"
	13
	14	/ {
	15	model = "TI OMAP3430 LDP (Zoom1 Labrador)";
	16	compatible = "ti,omap3-ldp", "ti,omap3";
	17
81777ff9	18	memory@80000000 {
bd5fc6fa TL	19	device_type = "memory";
	20	reg = <0x80000000 0x8000000>; /* 128 MB */
	21	};
	22
	23	cpus {
	24	cpu@0 {
	25	cpu0-supply = <&vcc>;
	26	};
	27	};
	28
	29	gpio_keys {
	30	compatible = "gpio-keys";
	31	pinctrl-names = "default";
	32	pinctrl-0 = <&gpio_key_pins>;
	33
	34	key_enter {
	35	label = "enter";
	36	gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
5c0a366d	37	linux,code = <KEY_ENTER>;
0c4d63b3	38	wakeup-source;
bd5fc6fa TL	39	};
	40
	41	key_f1 {
	42	label = "f1";
	43	gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
5c0a366d	44	linux,code = <KEY_F1>;
0c4d63b3	45	wakeup-source;
bd5fc6fa TL	46	};
	47
	48	key_f2 {
	49	label = "f2";
	50	gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
5c0a366d	51	linux,code = <KEY_F2>;
0c4d63b3	52	wakeup-source;
bd5fc6fa TL	53	};
	54
	55	key_f3 {
	56	label = "f3";
	57	gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
5c0a366d	58	linux,code = <KEY_F3>;
0c4d63b3	59	wakeup-source;
bd5fc6fa TL	60	};
	61
	62	key_f4 {
	63	label = "f4";
	64	gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
5c0a366d	65	linux,code = <KEY_F4>;
0c4d63b3	66	wakeup-source;
bd5fc6fa TL	67	};
	68
	69	key_left {
	70	label = "left";
	71	gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
5c0a366d	72	linux,code = <KEY_LEFT>;
0c4d63b3	73	wakeup-source;
bd5fc6fa TL	74	};
	75
	76	key_right {
	77	label = "right";
	78	gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
5c0a366d	79	linux,code = <KEY_RIGHT>;
0c4d63b3	80	wakeup-source;
bd5fc6fa TL	81	};
	82
	83	key_up {
	84	label = "up";
	85	gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
5c0a366d	86	linux,code = <KEY_UP>;
0c4d63b3	87	wakeup-source;
bd5fc6fa TL	88	};
	89
	90	key_down {
	91	label = "down";
	92	gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
5c0a366d	93	linux,code = <KEY_DOWN>;
0c4d63b3	94	wakeup-source;
bd5fc6fa TL	95	};
	96	};
	97	};
	98
	99	&gpmc {
44e47164 RQ	100	ranges = <0 0 0x30000000 0x1000000>, /* CS0 space, 16MB */
44e47164 RQ	101	<1 0 0x08000000 0x1000000>; /* CS1 space, 16MB */
bd5fc6fa TL	102
bd5fc6fa TL	103	nand@0,0 {
44e47164 RQ	104	compatible = "ti,omap2-nand";
	105	reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
	106	interrupt-parent = <&gpmc>;
	107	interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
	108	<1 IRQ_TYPE_NONE>; /* termcount */
bd5fc6fa	109	linux,mtd-name= "micron,nand";
bd5fc6fa	110	nand-bus-width = <16>;
24f284af	111	gpmc,device-width = <2>;
bd5fc6fa TL	112	ti,nand-ecc-opt = "bch8";
	113
	114	gpmc,sync-clk-ps = <0>;
	115	gpmc,cs-on-ns = <0>;
	116	gpmc,cs-rd-off-ns = <44>;
	117	gpmc,cs-wr-off-ns = <44>;
	118	gpmc,adv-on-ns = <6>;
	119	gpmc,adv-rd-off-ns = <34>;
	120	gpmc,adv-wr-off-ns = <44>;
	121	gpmc,we-off-ns = <40>;
	122	gpmc,oe-off-ns = <54>;
	123	gpmc,access-ns = <64>;
	124	gpmc,rd-cycle-ns = <82>;
	125	gpmc,wr-cycle-ns = <82>;
	126	gpmc,wr-access-ns = <40>;
	127	gpmc,wr-data-mux-bus-ns = <0>;
	128
	129	#address-cells = <1>;
	130	#size-cells = <1>;
	131
	132	partition@0 {
	133	label = "X-Loader";
	134	reg = <0 0x80000>;
	135	};
	136	partition@80000 {
	137	label = "U-Boot";
	138	reg = <0x80000 0x140000>;
	139	};
	140	partition@1c0000 {
	141	label = "Environment";
	142	reg = <0x1c0000 0x40000>;
	143	};
	144	partition@200000 {
	145	label = "Kernel";
	146	reg = <0x200000 0x1e00000>;
	147	};
	148	partition@2000000 {
	149	label = "Filesystem";
9dec11f5	150	reg = <0x2000000 0x6000000>;
bd5fc6fa TL	151	};
	152	};
	153
	154	ethernet@gpmc {
	155	interrupt-parent = <&gpio5>;
	156	interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
	157	reg = <1 0 0xff>;
	158	};
	159	};
	160
	161	&i2c1 {
	162	clock-frequency = <2600000>;
	163
	164	twl: twl@48 {
	165	reg = <0x48>;
	166	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
	167	interrupt-parent = <&intc>;
7f5736c3 TL	168
	169	twl_power: power {
	170	compatible = "ti,twl4030-power-idle";
	171	ti,use_poweroff;
	172	};
bd5fc6fa TL	173	};
	174	};
	175
	176	#include "twl4030.dtsi"
	177	#include "twl4030_omap3.dtsi"
bc10f310 TL	178	#include "omap3-panel-sharp-ls037v7dw01.dtsi"
	179
	180	&backlight0 {
	181	gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
	182	};
bd5fc6fa TL	183
	184	&i2c2 {
	185	clock-frequency = <400000>;
	186	};
	187
	188	&i2c3 {
	189	clock-frequency = <400000>;
	190	};
	191
bc10f310 TL	192	/* tps61130rsa enabled by twl4030 regen */
	193	&lcd_3v3 {
	194	regulator-always-on;
	195	};
	196
	197	&lcd0 {
	198	enable-gpios = <&twl_gpio 15 GPIO_ACTIVE_HIGH>; /* lcd INI */
	199	reset-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; /* gpio55, lcd RESB */
	200	mode-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio56, lcd MO */
	201	};
	202
	203	&mcspi1 {
	204	tsc2046@0 {
	205	interrupt-parent = <&gpio2>;
	206	interrupts = <22 0>; /* gpio54 */
3a637e00	207	pendown-gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
bc10f310 TL	208	};
	209	};
	210
bd5fc6fa	211	&mmc1 {
a8d6fb5d NM	212	/* See 35xx errata 2.1.1.128 in SPRZ278F */
a8d6fb5d NM	213	compatible = "ti,omap3-pre-es3-hsmmc";
bd5fc6fa TL	214	vmmc-supply = <&vmmc1>;
bd5fc6fa TL	215	bus-width = <4>;
a8d6fb5d NM	216	pinctrl-names = "default";
	217	pinctrl-0 = <&mmc1_pins>;
	218	};
	219
	220	&mmc2 {
	221	status="disabled";
	222	};
	223
	224	&mmc3 {
	225	status="disabled";
bd5fc6fa TL	226	};
	227
	228	&omap3_pmx_core {
	229	gpio_key_pins: pinmux_gpio_key_pins {
	230	pinctrl-single,pins = <
97f4817c JMC	231	OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT \| MUX_MODE4) /* cam_d2.gpio_101 */
	232	OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT \| MUX_MODE4) /* cam_d3.gpio_102 */
	233	OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT \| MUX_MODE4) /* cam_d4.gpio_103 */
	234	OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT \| MUX_MODE4) /* cam_d5.gpio_104 */
	235	OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT \| MUX_MODE4) /* cam_d6.gpio_105 */
	236	OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT \| MUX_MODE4) /* cam_d7.gpio_106 */
	237	OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT \| MUX_MODE4) /* cam_d8.gpio_107 */
	238	OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT \| MUX_MODE4) /* cam_d9.gpio_108 */
	239	OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT \| MUX_MODE4) /* cam_d10.gpio_109 */
bd5fc6fa TL	240	>;
	241	};
	242
	243	musb_pins: pinmux_musb_pins {
	244	pinctrl-single,pins = <
97f4817c JMC	245	OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT \| MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
	246	OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT \| MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
	247	OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT \| MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
	248	OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT \| MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
	249	OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT \| MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
	250	OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT \| MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
	251	OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT \| MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
	252	OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT \| MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
	253	OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT \| MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
	254	OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT \| MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
	255	OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT \| MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
	256	OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT \| MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
bd5fc6fa TL	257	>;
bd5fc6fa TL	258	};
a8d6fb5d NM	259
	260	mmc1_pins: pinmux_mmc1_pins {
	261	pinctrl-single,pins = <
	262	OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP \| MUX_MODE0) /* mmc1_clk.mmc1_clk */
	263	OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP \| MUX_MODE0) /* mmc1_cmd.mmc1_cmd */
	264	OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP \| MUX_MODE0) /* mmc1_dat0.mmc1_dat0 */
	265	OMAP3_CORE1_IOPAD(0x214A, PIN_INPUT_PULLUP \| MUX_MODE0) /* mmc1_dat1.mmc1_dat1 */
	266	OMAP3_CORE1_IOPAD(0x214C, PIN_INPUT_PULLUP \| MUX_MODE0) /* mmc1_dat2.mmc1_dat2 */
	267	OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP \| MUX_MODE0) /* mmc1_dat3.mmc1_dat3 */
	268	>;
	269	};
bd5fc6fa TL	270	};
bd5fc6fa TL	271
edafb204 TL	272	&twl_keypad {
	273	linux,keymap = <MATRIX_KEY(0, 0, KEY_1)
	274	MATRIX_KEY(0, 1, KEY_2)
	275	MATRIX_KEY(0, 2, KEY_3)
	276	MATRIX_KEY(1, 0, KEY_4)
	277	MATRIX_KEY(1, 1, KEY_5)
	278	MATRIX_KEY(1, 2, KEY_6)
	279	MATRIX_KEY(1, 3, KEY_F5)
	280	MATRIX_KEY(2, 0, KEY_7)
	281	MATRIX_KEY(2, 1, KEY_8)
	282	MATRIX_KEY(2, 2, KEY_9)
	283	MATRIX_KEY(2, 3, KEY_F6)
	284	MATRIX_KEY(3, 0, KEY_F7)
	285	MATRIX_KEY(3, 1, KEY_0)
	286	MATRIX_KEY(3, 2, KEY_F8)
	287	MATRIX_KEY(5, 4, KEY_RESERVED)
	288	MATRIX_KEY(4, 4, KEY_VOLUMEUP)
	289	MATRIX_KEY(5, 5, KEY_VOLUMEDOWN)>;
	290	};
	291
31f0820a TL	292	&uart3 {
	293	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
	294	};
	295
bd5fc6fa TL	296	&usb_otg_hs {
	297	pinctrl-names = "default";
	298	pinctrl-0 = <&musb_pins>;
	299	interface-type = <0>;
	300	usb-phy = <&usb2_phy>;
	301	mode = <3>;
	302	power = <50>;
	303	};
	304
	305	&vaux1 {
	306	/* Needed for ads7846 */
	307	regulator-name = "vcc";
	308	};