[linux-2.6-block.git] / arch / arm / boot / dts / exynos4210-trats.dts

// SPDX-License-Identifier: GPL-2.0
/*
 * Samsung's Exynos4210 based Trats board device tree source
 *
 * Copyright (c) 2012 Samsung Electronics Co., Ltd.
 *		http://www.samsung.com
 *
 * Device tree source file for Samsung's Trats board which is based on
 * Samsung's Exynos4210 SoC.
 */

/dts-v1/;
#include "exynos4210.dtsi"
#include <dt-bindings/gpio/gpio.h>

/ {
	model = "Samsung Trats based on Exynos4210";
	compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";

	memory@40000000 {
		device_type = "memory";
		reg =  <0x40000000 0x10000000
			0x50000000 0x10000000
			0x60000000 0x10000000
			0x70000000 0x10000000>;
	};

	chosen {
		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
		stdout-path = &serial_2;
	};

	regulators {
		compatible = "simple-bus";

		vemmc_reg: regulator-0 {
			compatible = "regulator-fixed";
			regulator-name = "VMEM_VDD_2.8V";
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <2800000>;
			gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
			enable-active-high;
		};

		tsp_reg: regulator-1 {
			compatible = "regulator-fixed";
			regulator-name = "TSP_FIXED_VOLTAGES";
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <2800000>;
			gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
			enable-active-high;
		};

		cam_af_28v_reg: regulator-2 {
			compatible = "regulator-fixed";
			regulator-name = "8M_AF_2.8V_EN";
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <2800000>;
			gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
			enable-active-high;
		};

		cam_io_en_reg: regulator-3 {
			compatible = "regulator-fixed";
			regulator-name = "CAM_IO_EN";
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <2800000>;
			gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
			enable-active-high;
		};

		cam_io_12v_reg: regulator-4 {
			compatible = "regulator-fixed";
			regulator-name = "8M_1.2V_EN";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
			gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
			enable-active-high;
		};

		vt_core_15v_reg: regulator-5 {
			compatible = "regulator-fixed";
			regulator-name = "VT_CORE_1.5V";
			regulator-min-microvolt = <1500000>;
			regulator-max-microvolt = <1500000>;
			gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
			enable-active-high;
		};
	};

	gpio-keys {
		compatible = "gpio-keys";

		vol-down-key {
			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
			linux,code = <114>;
			label = "volume down";
			debounce-interval = <10>;
		};

		vol-up-key {
			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
			linux,code = <115>;
			label = "volume up";
			debounce-interval = <10>;
		};

		power-key {
			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
			linux,code = <116>;
			label = "power";
			debounce-interval = <10>;
			wakeup-source;
		};

		ok-key {
			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
			linux,code = <352>;
			label = "ok";
			debounce-interval = <10>;
		};
	};

	fixed-rate-clocks {
		xxti {
			compatible = "samsung,clock-xxti";
			clock-frequency = <0>;
		};

		xusbxti {
			compatible = "samsung,clock-xusbxti";
			clock-frequency = <24000000>;
		};
	};

	thermal-zones {
		cpu_thermal: cpu-thermal {
			cooling-maps {
				map0 {
				     /* Corresponds to 800MHz at freq_table */
				     cooling-device = <&cpu0 2 2>;
				};
				map1 {
				     /* Corresponds to 200MHz at freq_table */
				     cooling-device = <&cpu0 4 4>;
			       };
		       };
		};
	};

};

&camera {
	pinctrl-names = "default";
	pinctrl-0 = <>;
	status = "okay";
};

&cpu0 {
	cpu0-supply = <&varm_breg>;
};

&dsi_0 {
	vddcore-supply = <&vusb_reg>;
	vddio-supply = <&vmipi_reg>;
	samsung,burst-clock-frequency = <500000000>;
	samsung,esc-clock-frequency = <20000000>;
	samsung,pll-clock-frequency = <24000000>;
	status = "okay";

	panel@0 {
		reg = <0>;
		compatible = "samsung,s6e8aa0";
		vdd3-supply = <&vcclcd_reg>;
		vci-supply = <&vlcd_reg>;
		reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
		power-on-delay= <50>;
		reset-delay = <100>;
		init-delay = <100>;
		flip-horizontal;
		flip-vertical;
		panel-width-mm = <58>;
		panel-height-mm = <103>;

		display-timings {
			timing-0 {
				clock-frequency = <57153600>;
				hactive = <720>;
				vactive = <1280>;
				hfront-porch = <5>;
				hback-porch = <5>;
				hsync-len = <5>;
				vfront-porch = <13>;
				vback-porch = <1>;
				vsync-len = <2>;
			};
		};
	};
};

&exynos_usbphy {
	status = "okay";
	vbus-supply = <&safe1_sreg>;
};

&fimc_0 {
	status = "okay";
	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
			  <&clock CLK_SCLK_FIMC0>;
	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
	assigned-clock-rates = <0>, <160000000>;
};

&fimc_1 {
	status = "okay";
	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
			  <&clock CLK_SCLK_FIMC1>;
	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
	assigned-clock-rates = <0>, <160000000>;
};

&fimc_2 {
	status = "okay";
	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
			  <&clock CLK_SCLK_FIMC2>;
	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
		assigned-clock-rates = <0>, <160000000>;
};

&fimc_3 {
	status = "okay";
	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
			  <&clock CLK_SCLK_FIMC3>;
	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
	assigned-clock-rates = <0>, <160000000>;
};

&fimd {
	status = "okay";
};

&hsotg {
	vusb_d-supply = <&vusb_reg>;
	vusb_a-supply = <&vusbdac_reg>;
	dr_mode = "peripheral";
	status = "okay";
};

&i2c_3 {
	samsung,i2c-sda-delay = <100>;
	samsung,i2c-slave-addr = <0x10>;
	samsung,i2c-max-bus-freq = <400000>;
	pinctrl-0 = <&i2c3_bus>;
	pinctrl-names = "default";
	status = "okay";

	mms114-touchscreen@48 {
		compatible = "melfas,mms114";
		reg = <0x48>;
		interrupt-parent = <&gpx0>;
		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
		touchscreen-size-x = <720>;
		touchscreen-size-y = <1280>;
		avdd-supply = <&tsp_reg>;
		vdd-supply = <&tsp_reg>;
	};
};

&i2c_5 {
	samsung,i2c-sda-delay = <100>;
	samsung,i2c-slave-addr = <0x10>;
	samsung,i2c-max-bus-freq = <100000>;
	pinctrl-0 = <&i2c5_bus>;
	pinctrl-names = "default";
	status = "okay";

	max8997_pmic@66 {
		compatible = "maxim,max8997-pmic";
		interrupts-extended = <&gpx0 7 0>, <&gpx2 3 0>;

		reg = <0x66>;
		interrupt-parent = <&gpx0>;
		interrupts = <7 IRQ_TYPE_NONE>;

		max8997,pmic-buck1-uses-gpio-dvs;
		max8997,pmic-buck2-uses-gpio-dvs;
		max8997,pmic-buck5-uses-gpio-dvs;

		max8997,pmic-ignore-gpiodvs-side-effect;
		max8997,pmic-buck125-default-dvs-idx = <0>;

		max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
						 <&gpx0 6 GPIO_ACTIVE_HIGH>,
						 <&gpl0 0 GPIO_ACTIVE_HIGH>;

		max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
						 <1250000>, <1200000>,
						 <1150000>, <1100000>,
						 <1000000>, <950000>;

		max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
						 <950000>,  <900000>,
						 <1100000>, <1000000>,
						 <950000>,  <900000>;

		max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
						 <1200000>, <1200000>,
						 <1200000>, <1200000>,
						 <1200000>, <1200000>;

		regulators {
			valive_reg: LDO2 {
			     regulator-name = "VALIVE_1.1V_C210";
			     regulator-min-microvolt = <1100000>;
			     regulator-max-microvolt = <1100000>;
			     regulator-always-on;
			};

			vusb_reg: LDO3 {
			     regulator-name = "VUSB_1.1V_C210";
			     regulator-min-microvolt = <1100000>;
			     regulator-max-microvolt = <1100000>;
			};

			vmipi_reg: LDO4 {
			     regulator-name = "VMIPI_1.8V";
			     regulator-min-microvolt = <1800000>;
			     regulator-max-microvolt = <1800000>;
			};

			vpda_reg: LDO6 {
			     regulator-name = "VCC_1.8V_PDA";
			     regulator-min-microvolt = <1800000>;
			     regulator-max-microvolt = <1800000>;
			     regulator-always-on;
			};

			vcam_reg: LDO7 {
			     regulator-name = "CAM_ISP_1.8V";
			     regulator-min-microvolt = <1800000>;
			     regulator-max-microvolt = <1800000>;
			};

			vusbdac_reg: LDO8 {
			     regulator-name = "VUSB+VDAC_3.3V_C210";
			     regulator-min-microvolt = <3300000>;
			     regulator-max-microvolt = <3300000>;
			};

			vccpda_reg: LDO9 {
			     regulator-name = "VCC_2.8V_PDA";
			     regulator-min-microvolt = <2800000>;
			     regulator-max-microvolt = <2800000>;
			     regulator-always-on;
			};

			vpll_reg: LDO10 {
			     regulator-name = "VPLL_1.1V_C210";
			     regulator-min-microvolt = <1100000>;
			     regulator-max-microvolt = <1100000>;
			     regulator-always-on;
			};

			vtcam_reg: LDO12 {
			     regulator-name = "VT_CAM_1.8V";
			     regulator-min-microvolt = <1800000>;
			     regulator-max-microvolt = <1800000>;
			};

			vcclcd_reg: LDO13 {
			     regulator-name = "VCC_3.3V_LCD";
			     regulator-min-microvolt = <3300000>;
			     regulator-max-microvolt = <3300000>;
			};

			vlcd_reg: LDO15 {
			     regulator-name = "VLCD_2.2V";
			     regulator-min-microvolt = <2200000>;
			     regulator-max-microvolt = <2200000>;
			};

			camsensor_reg: LDO16 {
			     regulator-name = "CAM_SENSOR_IO_1.8V";
			     regulator-min-microvolt = <1800000>;
			     regulator-max-microvolt = <1800000>;
			};

			vddq_reg: LDO21 {
			     regulator-name = "VDDQ_M1M2_1.2V";
			     regulator-min-microvolt = <1200000>;
			     regulator-max-microvolt = <1200000>;
			     regulator-always-on;
			};

			varm_breg: BUCK1 {
			     /*
			      * HACK: The real name is VARM_1.2V_C210,
			      * but exynos-cpufreq does not support
			      * DT-based regulator lookup yet.
			      */
			     regulator-name = "vdd_arm";
			     regulator-min-microvolt = <900000>;
			     regulator-max-microvolt = <1350000>;
			     regulator-always-on;
			};

			vint_breg: BUCK2 {
			     regulator-name = "VINT_1.1V_C210";
			     regulator-min-microvolt = <900000>;
			     regulator-max-microvolt = <1100000>;
			     regulator-always-on;
			};

			camisp_breg: BUCK4 {
			     regulator-name = "CAM_ISP_CORE_1.2V";
			     regulator-min-microvolt = <1200000>;
			     regulator-max-microvolt = <1200000>;
			};

			vmem_breg: BUCK5 {
			     regulator-name = "VMEM_1.2V_C210";
			     regulator-min-microvolt = <1200000>;
			     regulator-max-microvolt = <1200000>;
			     regulator-always-on;
			};

			vccsub_breg: BUCK7 {
			     regulator-name = "VCC_SUB_2.0V";
			     regulator-min-microvolt = <2000000>;
			     regulator-max-microvolt = <2000000>;
			     regulator-always-on;
			};

			safe1_sreg: ESAFEOUT1 {
			     regulator-name = "SAFEOUT1";
			};

			safe2_sreg: ESAFEOUT2 {
			     regulator-name = "SAFEOUT2";
			     regulator-boot-on;
			};
		};
	};
};

&sdhci_0 {
	bus-width = <8>;
	non-removable;
	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
	pinctrl-names = "default";
	vmmc-supply = <&vemmc_reg>;
	status = "okay";
};

&serial_0 {
	status = "okay";
};

&serial_1 {
	status = "okay";
};

&serial_2 {
	status = "okay";
};

&serial_3 {
	status = "okay";
};

&tmu {
	status = "okay";
};
Commit	Line	Data
cc4637f7	1	// SPDX-License-Identifier: GPL-2.0
d105f0b1 TF	2	/*
	3	* Samsung's Exynos4210 based Trats board device tree source
	4	*
	5	* Copyright (c) 2012 Samsung Electronics Co., Ltd.
	6	* http://www.samsung.com
	7	*
	8	* Device tree source file for Samsung's Trats board which is based on
	9	* Samsung's Exynos4210 SoC.
cc4637f7	10	*/
d105f0b1 TF	11
d105f0b1 TF	12	/dts-v1/;
3799279f	13	#include "exynos4210.dtsi"
39c1c413	14	#include <dt-bindings/gpio/gpio.h>
d105f0b1 TF	15
	16	/ {
	17	model = "Samsung Trats based on Exynos4210";
8bdb31b4	18	compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
d105f0b1	19
824e4133	20	memory@40000000 {
1354835a	21	device_type = "memory";
59cf19a4 TF	22	reg = <0x40000000 0x10000000
	23	0x50000000 0x10000000
	24	0x60000000 0x10000000
	25	0x70000000 0x10000000>;
d105f0b1 TF	26	};
	27
	28	chosen {
	29	bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
62d38099	30	stdout-path = &serial_2;
d105f0b1 TF	31	};
d105f0b1 TF	32
b75e2e3d AH	33	regulators {
	34	compatible = "simple-bus";
	35
	36	vemmc_reg: regulator-0 {
	37	compatible = "regulator-fixed";
	38	regulator-name = "VMEM_VDD_2.8V";
	39	regulator-min-microvolt = <2800000>;
	40	regulator-max-microvolt = <2800000>;
39c1c413	41	gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
b75e2e3d AH	42	enable-active-high;
	43	};
	44
	45	tsp_reg: regulator-1 {
	46	compatible = "regulator-fixed";
	47	regulator-name = "TSP_FIXED_VOLTAGES";
	48	regulator-min-microvolt = <2800000>;
	49	regulator-max-microvolt = <2800000>;
39c1c413	50	gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
b75e2e3d AH	51	enable-active-high;
	52	};
	53
	54	cam_af_28v_reg: regulator-2 {
	55	compatible = "regulator-fixed";
	56	regulator-name = "8M_AF_2.8V_EN";
	57	regulator-min-microvolt = <2800000>;
	58	regulator-max-microvolt = <2800000>;
39c1c413	59	gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
b75e2e3d AH	60	enable-active-high;
	61	};
	62
	63	cam_io_en_reg: regulator-3 {
	64	compatible = "regulator-fixed";
	65	regulator-name = "CAM_IO_EN";
	66	regulator-min-microvolt = <2800000>;
	67	regulator-max-microvolt = <2800000>;
39c1c413	68	gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
b75e2e3d AH	69	enable-active-high;
	70	};
	71
	72	cam_io_12v_reg: regulator-4 {
	73	compatible = "regulator-fixed";
	74	regulator-name = "8M_1.2V_EN";
	75	regulator-min-microvolt = <1200000>;
	76	regulator-max-microvolt = <1200000>;
39c1c413	77	gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
b75e2e3d AH	78	enable-active-high;
	79	};
	80
	81	vt_core_15v_reg: regulator-5 {
	82	compatible = "regulator-fixed";
	83	regulator-name = "VT_CORE_1.5V";
	84	regulator-min-microvolt = <1500000>;
	85	regulator-max-microvolt = <1500000>;
39c1c413	86	gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
b75e2e3d AH	87	enable-active-high;
b75e2e3d AH	88	};
d105f0b1 TF	89	};
d105f0b1 TF	90
9eb61020 TF	91	gpio-keys {
	92	compatible = "gpio-keys";
	93
	94	vol-down-key {
39c1c413	95	gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
9eb61020 TF	96	linux,code = <114>;
	97	label = "volume down";
	98	debounce-interval = <10>;
	99	};
	100
	101	vol-up-key {
39c1c413	102	gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
9eb61020 TF	103	linux,code = <115>;
	104	label = "volume up";
	105	debounce-interval = <10>;
	106	};
	107
	108	power-key {
39c1c413	109	gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
9eb61020 TF	110	linux,code = <116>;
	111	label = "power";
	112	debounce-interval = <10>;
36a0282a	113	wakeup-source;
9eb61020 TF	114	};
	115
	116	ok-key {
39c1c413	117	gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
9eb61020 TF	118	linux,code = <352>;
	119	label = "ok";
	120	debounce-interval = <10>;
	121	};
	122	};
	123
8b6076d4 TA	124	fixed-rate-clocks {
	125	xxti {
	126	compatible = "samsung,clock-xxti";
	127	clock-frequency = <0>;
	128	};
	129
	130	xusbxti {
	131	compatible = "samsung,clock-xusbxti";
	132	clock-frequency = <24000000>;
	133	};
	134	};
39a11311	135
bf4a0bed LM	136	thermal-zones {
	137	cpu_thermal: cpu-thermal {
	138	cooling-maps {
	139	map0 {
	140	/* Corresponds to 800MHz at freq_table */
	141	cooling-device = <&cpu0 2 2>;
	142	};
	143	map1 {
	144	/* Corresponds to 200MHz at freq_table */
	145	cooling-device = <&cpu0 4 4>;
	146	};
	147	};
	148	};
	149	};
	150
0f895e4e	151	};
39a11311	152
0f895e4e MP	153	&camera {
	154	pinctrl-names = "default";
	155	pinctrl-0 = <>;
	156	status = "okay";
d105f0b1	157	};
9b70afd9	158
300bde79 TA	159	&cpu0 {
	160	cpu0-supply = <&varm_breg>;
	161	};
	162
9b70afd9 KK	163	&dsi_0 {
	164	vddcore-supply = <&vusb_reg>;
	165	vddio-supply = <&vmipi_reg>;
4c74ea4e HK	166	samsung,burst-clock-frequency = <500000000>;
4c74ea4e HK	167	samsung,esc-clock-frequency = <20000000>;
9b70afd9 KK	168	samsung,pll-clock-frequency = <24000000>;
	169	status = "okay";
	170
9b70afd9 KK	171	panel@0 {
	172	reg = <0>;
	173	compatible = "samsung,s6e8aa0";
	174	vdd3-supply = <&vcclcd_reg>;
	175	vci-supply = <&vlcd_reg>;
39c1c413	176	reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
9b70afd9 KK	177	power-on-delay= <50>;
	178	reset-delay = <100>;
	179	init-delay = <100>;
	180	flip-horizontal;
	181	flip-vertical;
	182	panel-width-mm = <58>;
	183	panel-height-mm = <103>;
	184
	185	display-timings {
	186	timing-0 {
	187	clock-frequency = <57153600>;
	188	hactive = <720>;
	189	vactive = <1280>;
	190	hfront-porch = <5>;
	191	hback-porch = <5>;
	192	hsync-len = <5>;
	193	vfront-porch = <13>;
	194	vback-porch = <1>;
	195	vsync-len = <2>;
	196	};
	197	};
9b70afd9 KK	198	};
	199	};
	200
	201	&exynos_usbphy {
	202	status = "okay";
4ae9a4c6	203	vbus-supply = <&safe1_sreg>;
9b70afd9 KK	204	};
9b70afd9 KK	205
0f895e4e MP	206	&fimc_0 {
	207	status = "okay";
	208	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
	209	<&clock CLK_SCLK_FIMC0>;
	210	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
	211	assigned-clock-rates = <0>, <160000000>;
	212	};
	213
	214	&fimc_1 {
	215	status = "okay";
	216	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
	217	<&clock CLK_SCLK_FIMC1>;
	218	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
	219	assigned-clock-rates = <0>, <160000000>;
	220	};
	221
	222	&fimc_2 {
	223	status = "okay";
	224	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
	225	<&clock CLK_SCLK_FIMC2>;
	226	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
	227	assigned-clock-rates = <0>, <160000000>;
	228	};
	229
	230	&fimc_3 {
	231	status = "okay";
	232	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
	233	<&clock CLK_SCLK_FIMC3>;
	234	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
	235	assigned-clock-rates = <0>, <160000000>;
	236	};
	237
9b70afd9 KK	238	&fimd {
	239	status = "okay";
	240	};
	241
	242	&hsotg {
	243	vusb_d-supply = <&vusb_reg>;
	244	vusb_a-supply = <&vusbdac_reg>;
	245	dr_mode = "peripheral";
	246	status = "okay";
	247	};
	248
	249	&i2c_3 {
	250	samsung,i2c-sda-delay = <100>;
	251	samsung,i2c-slave-addr = <0x10>;
	252	samsung,i2c-max-bus-freq = <400000>;
	253	pinctrl-0 = <&i2c3_bus>;
	254	pinctrl-names = "default";
	255	status = "okay";
	256
	257	mms114-touchscreen@48 {
	258	compatible = "melfas,mms114";
	259	reg = <0x48>;
	260	interrupt-parent = <&gpx0>;
6ff0b90d	261	interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
83cb529b AS	262	touchscreen-size-x = <720>;
83cb529b AS	263	touchscreen-size-y = <1280>;
9b70afd9 KK	264	avdd-supply = <&tsp_reg>;
	265	vdd-supply = <&tsp_reg>;
	266	};
	267	};
	268
	269	&i2c_5 {
	270	samsung,i2c-sda-delay = <100>;
	271	samsung,i2c-slave-addr = <0x10>;
	272	samsung,i2c-max-bus-freq = <100000>;
	273	pinctrl-0 = <&i2c5_bus>;
	274	pinctrl-names = "default";
	275	status = "okay";
	276
	277	max8997_pmic@66 {
	278	compatible = "maxim,max8997-pmic";
6d6a33da	279	interrupts-extended = <&gpx0 7 0>, <&gpx2 3 0>;
9b70afd9 KK	280
9b70afd9 KK	281	reg = <0x66>;
330d1276	282	interrupt-parent = <&gpx0>;
6ff0b90d	283	interrupts = <7 IRQ_TYPE_NONE>;
9b70afd9 KK	284
	285	max8997,pmic-buck1-uses-gpio-dvs;
	286	max8997,pmic-buck2-uses-gpio-dvs;
	287	max8997,pmic-buck5-uses-gpio-dvs;
	288
	289	max8997,pmic-ignore-gpiodvs-side-effect;
	290	max8997,pmic-buck125-default-dvs-idx = <0>;
	291
39c1c413 JMC	292	max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
	293	<&gpx0 6 GPIO_ACTIVE_HIGH>,
	294	<&gpl0 0 GPIO_ACTIVE_HIGH>;
9b70afd9 KK	295
	296	max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
	297	<1250000>, <1200000>,
	298	<1150000>, <1100000>,
	299	<1000000>, <950000>;
	300
	301	max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
	302	<950000>, <900000>,
	303	<1100000>, <1000000>,
	304	<950000>, <900000>;
	305
	306	max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
	307	<1200000>, <1200000>,
	308	<1200000>, <1200000>,
	309	<1200000>, <1200000>;
	310
	311	regulators {
	312	valive_reg: LDO2 {
	313	regulator-name = "VALIVE_1.1V_C210";
	314	regulator-min-microvolt = <1100000>;
	315	regulator-max-microvolt = <1100000>;
	316	regulator-always-on;
	317	};
	318
	319	vusb_reg: LDO3 {
	320	regulator-name = "VUSB_1.1V_C210";
	321	regulator-min-microvolt = <1100000>;
	322	regulator-max-microvolt = <1100000>;
	323	};
	324
	325	vmipi_reg: LDO4 {
	326	regulator-name = "VMIPI_1.8V";
	327	regulator-min-microvolt = <1800000>;
	328	regulator-max-microvolt = <1800000>;
	329	};
	330
	331	vpda_reg: LDO6 {
	332	regulator-name = "VCC_1.8V_PDA";
	333	regulator-min-microvolt = <1800000>;
	334	regulator-max-microvolt = <1800000>;
	335	regulator-always-on;
	336	};
	337
	338	vcam_reg: LDO7 {
	339	regulator-name = "CAM_ISP_1.8V";
	340	regulator-min-microvolt = <1800000>;
	341	regulator-max-microvolt = <1800000>;
	342	};
	343
	344	vusbdac_reg: LDO8 {
44ad5e1f	345	regulator-name = "VUSB+VDAC_3.3V_C210";
9b70afd9 KK	346	regulator-min-microvolt = <3300000>;
	347	regulator-max-microvolt = <3300000>;
	348	};
	349
	350	vccpda_reg: LDO9 {
	351	regulator-name = "VCC_2.8V_PDA";
	352	regulator-min-microvolt = <2800000>;
	353	regulator-max-microvolt = <2800000>;
	354	regulator-always-on;
	355	};
	356
	357	vpll_reg: LDO10 {
	358	regulator-name = "VPLL_1.1V_C210";
	359	regulator-min-microvolt = <1100000>;
	360	regulator-max-microvolt = <1100000>;
	361	regulator-always-on;
	362	};
	363
	364	vtcam_reg: LDO12 {
	365	regulator-name = "VT_CAM_1.8V";
	366	regulator-min-microvolt = <1800000>;
	367	regulator-max-microvolt = <1800000>;
	368	};
	369
	370	vcclcd_reg: LDO13 {
	371	regulator-name = "VCC_3.3V_LCD";
	372	regulator-min-microvolt = <3300000>;
	373	regulator-max-microvolt = <3300000>;
	374	};
	375
	376	vlcd_reg: LDO15 {
	377	regulator-name = "VLCD_2.2V";
	378	regulator-min-microvolt = <2200000>;
	379	regulator-max-microvolt = <2200000>;
	380	};
	381
	382	camsensor_reg: LDO16 {
	383	regulator-name = "CAM_SENSOR_IO_1.8V";
	384	regulator-min-microvolt = <1800000>;
	385	regulator-max-microvolt = <1800000>;
	386	};
	387
	388	vddq_reg: LDO21 {
	389	regulator-name = "VDDQ_M1M2_1.2V";
	390	regulator-min-microvolt = <1200000>;
	391	regulator-max-microvolt = <1200000>;
	392	regulator-always-on;
	393	};
	394
	395	varm_breg: BUCK1 {
	396	/*
	397	* HACK: The real name is VARM_1.2V_C210,
	398	* but exynos-cpufreq does not support
	399	* DT-based regulator lookup yet.
	400	*/
	401	regulator-name = "vdd_arm";
	402	regulator-min-microvolt = <900000>;
	403	regulator-max-microvolt = <1350000>;
	404	regulator-always-on;
	405	};
	406
	407	vint_breg: BUCK2 {
	408	regulator-name = "VINT_1.1V_C210";
	409	regulator-min-microvolt = <900000>;
410	regulator-max-microvolt = <1100000>;
411	regulator-always-on;
412	};
413
414	camisp_breg: BUCK4 {
415	regulator-name = "CAM_ISP_CORE_1.2V";
416	regulator-min-microvolt = <1200000>;
417	regulator-max-microvolt = <1200000>;
418	};
419
420	vmem_breg: BUCK5 {
421	regulator-name = "VMEM_1.2V_C210";
422	regulator-min-microvolt = <1200000>;
423	regulator-max-microvolt = <1200000>;
424	regulator-always-on;
425	};
426
427	vccsub_breg: BUCK7 {
428	regulator-name = "VCC_SUB_2.0V";
429	regulator-min-microvolt = <2000000>;
430	regulator-max-microvolt = <2000000>;
431	regulator-always-on;
432	};
433
434	safe1_sreg: ESAFEOUT1 {
435	regulator-name = "SAFEOUT1";
9b70afd9 KK	436	};
	437
	438	safe2_sreg: ESAFEOUT2 {
	439	regulator-name = "SAFEOUT2";
	440	regulator-boot-on;
	441	};
	442	};
	443	};
	444	};
	445
	446	&sdhci_0 {
	447	bus-width = <8>;
	448	non-removable;
	449	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
	450	pinctrl-names = "default";
	451	vmmc-supply = <&vemmc_reg>;
	452	status = "okay";
	453	};
	454
	455	&serial_0 {
	456	status = "okay";
	457	};
	458
	459	&serial_1 {
	460	status = "okay";
	461	};
	462
	463	&serial_2 {
	464	status = "okay";
	465	};
	466
	467	&serial_3 {
	468	status = "okay";
	469	};
	470
	471	&tmu {
	472	status = "okay";
	473	};