[linux-block.git] / Documentation / ia64 / aliasing.txt

	         MEMORY ATTRIBUTE ALIASING ON IA-64

			   Bjorn Helgaas
		       <bjorn.helgaas@hp.com>
			    May 4, 2006


MEMORY ATTRIBUTES

    Itanium supports several attributes for virtual memory references.
    The attribute is part of the virtual translation, i.e., it is
    contained in the TLB entry.  The ones of most interest to the Linux
    kernel are:

	WB		Write-back (cacheable)
	UC		Uncacheable
	WC		Write-coalescing

    System memory typically uses the WB attribute.  The UC attribute is
    used for memory-mapped I/O devices.  The WC attribute is uncacheable
    like UC is, but writes may be delayed and combined to increase
    performance for things like frame buffers.

    The Itanium architecture requires that we avoid accessing the same
    page with both a cacheable mapping and an uncacheable mapping[1].

    The design of the chipset determines which attributes are supported
    on which regions of the address space.  For example, some chipsets
    support either WB or UC access to main memory, while others support
    only WB access.

MEMORY MAP

    Platform firmware describes the physical memory map and the
    supported attributes for each region.  At boot-time, the kernel uses
    the EFI GetMemoryMap() interface.  ACPI can also describe memory
    devices and the attributes they support, but Linux/ia64 currently
    doesn't use this information.

    The kernel uses the efi_memmap table returned from GetMemoryMap() to
    learn the attributes supported by each region of physical address
    space.  Unfortunately, this table does not completely describe the
    address space because some machines omit some or all of the MMIO
    regions from the map.

    The kernel maintains another table, kern_memmap, which describes the
    memory Linux is actually using and the attribute for each region.
    This contains only system memory; it does not contain MMIO space.

    The kern_memmap table typically contains only a subset of the system
    memory described by the efi_memmap.  Linux/ia64 can't use all memory
    in the system because of constraints imposed by the identity mapping
    scheme.

    The efi_memmap table is preserved unmodified because the original
    boot-time information is required for kexec.

KERNEL IDENTITY MAPPINGS

    Linux/ia64 identity mappings are done with large pages, currently
    either 16MB or 64MB, referred to as "granules."  Cacheable mappings
    are speculative[2], so the processor can read any location in the
    page at any time, independent of the programmer's intentions.  This
    means that to avoid attribute aliasing, Linux can create a cacheable
    identity mapping only when the entire granule supports cacheable
    access.

    Therefore, kern_memmap contains only full granule-sized regions that
    can referenced safely by an identity mapping.

    Uncacheable mappings are not speculative, so the processor will
    generate UC accesses only to locations explicitly referenced by
    software.  This allows UC identity mappings to cover granules that
    are only partially populated, or populated with a combination of UC
    and WB regions.

USER MAPPINGS

    User mappings are typically done with 16K or 64K pages.  The smaller
    page size allows more flexibility because only 16K or 64K has to be
    homogeneous with respect to memory attributes.

POTENTIAL ATTRIBUTE ALIASING CASES

    There are several ways the kernel creates new mappings:

    mmap of /dev/mem

	This uses remap_pfn_range(), which creates user mappings.  These
	mappings may be either WB or UC.  If the region being mapped
	happens to be in kern_memmap, meaning that it may also be mapped
	by a kernel identity mapping, the user mapping must use the same
	attribute as the kernel mapping.

	If the region is not in kern_memmap, the user mapping should use
	an attribute reported as being supported in the EFI memory map.

	Since the EFI memory map does not describe MMIO on some
	machines, this should use an uncacheable mapping as a fallback.

    mmap of /sys/class/pci_bus/.../legacy_mem

	This is very similar to mmap of /dev/mem, except that legacy_mem
	only allows mmap of the one megabyte "legacy MMIO" area for a
	specific PCI bus.  Typically this is the first megabyte of
	physical address space, but it may be different on machines with
	several VGA devices.

	"X" uses this to access VGA frame buffers.  Using legacy_mem
	rather than /dev/mem allows multiple instances of X to talk to
	different VGA cards.

	The /dev/mem mmap constraints apply.

    mmap of /proc/bus/pci/.../??.?

    	This is an MMIO mmap of PCI functions, which additionally may or
	may not be requested as using the WC attribute.

	If WC is requested, and the region in kern_memmap is either WC
	or UC, and the EFI memory map designates the region as WC, then
	the WC mapping is allowed.

	Otherwise, the user mapping must use the same attribute as the
	kernel mapping.

    read/write of /dev/mem

	This uses copy_from_user(), which implicitly uses a kernel
	identity mapping.  This is obviously safe for things in
	kern_memmap.

	There may be corner cases of things that are not in kern_memmap,
	but could be accessed this way.  For example, registers in MMIO
	space are not in kern_memmap, but could be accessed with a UC
	mapping.  This would not cause attribute aliasing.  But
	registers typically can be accessed only with four-byte or
	eight-byte accesses, and the copy_from_user() path doesn't allow
	any control over the access size, so this would be dangerous.

    ioremap()

	This returns a mapping for use inside the kernel.

	If the region is in kern_memmap, we should use the attribute
	specified there.

	If the EFI memory map reports that the entire granule supports
	WB, we should use that (granules that are partially reserved
	or occupied by firmware do not appear in kern_memmap).

	If the granule contains non-WB memory, but we can cover the
	region safely with kernel page table mappings, we can use
	ioremap_page_range() as most other architectures do.

	Failing all of the above, we have to fall back to a UC mapping.

PAST PROBLEM CASES

    mmap of various MMIO regions from /dev/mem by "X" on Intel platforms

      The EFI memory map may not report these MMIO regions.

      These must be allowed so that X will work.  This means that
      when the EFI memory map is incomplete, every /dev/mem mmap must
      succeed.  It may create either WB or UC user mappings, depending
      on whether the region is in kern_memmap or the EFI memory map.

    mmap of 0x0-0x9FFFF /dev/mem by "hwinfo" on HP sx1000 with VGA enabled

      See https://bugzilla.novell.com/show_bug.cgi?id=140858.

      The EFI memory map reports the following attributes:
        0x00000-0x9FFFF WB only
        0xA0000-0xBFFFF UC only (VGA frame buffer)
        0xC0000-0xFFFFF WB only

      This mmap is done with user pages, not kernel identity mappings,
      so it is safe to use WB mappings.

      The kernel VGA driver may ioremap the VGA frame buffer at 0xA0000,
      which uses a granule-sized UC mapping.  This granule will cover some
      WB-only memory, but since UC is non-speculative, the processor will
      never generate an uncacheable reference to the WB-only areas unless
      the driver explicitly touches them.

    mmap of 0x0-0xFFFFF legacy_mem by "X"

      If the EFI memory map reports that the entire range supports the
      same attributes, we can allow the mmap (and we will prefer WB if
      supported, as is the case with HP sx[12]000 machines with VGA
      disabled).

      If EFI reports the range as partly WB and partly UC (as on sx[12]000
      machines with VGA enabled), we must fail the mmap because there's no
      safe attribute to use.

      If EFI reports some of the range but not all (as on Intel firmware
      that doesn't report the VGA frame buffer at all), we should fail the
      mmap and force the user to map just the specific region of interest.

    mmap of 0xA0000-0xBFFFF legacy_mem by "X" on HP sx1000 with VGA disabled

      The EFI memory map reports the following attributes:
        0x00000-0xFFFFF WB only (no VGA MMIO hole)

      This is a special case of the previous case, and the mmap should
      fail for the same reason as above.

    read of /sys/devices/.../rom

      For VGA devices, this may cause an ioremap() of 0xC0000.  This
      used to be done with a UC mapping, because the VGA frame buffer
      at 0xA0000 prevents use of a WB granule.  The UC mapping causes
      an MCA on HP sx[12]000 chipsets.

      We should use WB page table mappings to avoid covering the VGA
      frame buffer.

NOTES

    [1] SDM rev 2.2, vol 2, sec 4.4.1.
    [2] SDM rev 2.2, vol 2, sec 4.4.6.
Commit	Line	Data
32e62c63 BH	1	MEMORY ATTRIBUTE ALIASING ON IA-64
	2
	3	Bjorn Helgaas
	4	<bjorn.helgaas@hp.com>
	5	May 4, 2006
	6
	7
	8	MEMORY ATTRIBUTES
	9
	10	Itanium supports several attributes for virtual memory references.
	11	The attribute is part of the virtual translation, i.e., it is
	12	contained in the TLB entry. The ones of most interest to the Linux
	13	kernel are:
	14
	15	WB Write-back (cacheable)
	16	UC Uncacheable
	17	WC Write-coalescing
	18
	19	System memory typically uses the WB attribute. The UC attribute is
	20	used for memory-mapped I/O devices. The WC attribute is uncacheable
	21	like UC is, but writes may be delayed and combined to increase
	22	performance for things like frame buffers.
	23
	24	The Itanium architecture requires that we avoid accessing the same
	25	page with both a cacheable mapping and an uncacheable mapping[1].
	26
	27	The design of the chipset determines which attributes are supported
	28	on which regions of the address space. For example, some chipsets
	29	support either WB or UC access to main memory, while others support
	30	only WB access.
	31
	32	MEMORY MAP
	33
	34	Platform firmware describes the physical memory map and the
	35	supported attributes for each region. At boot-time, the kernel uses
	36	the EFI GetMemoryMap() interface. ACPI can also describe memory
	37	devices and the attributes they support, but Linux/ia64 currently
	38	doesn't use this information.
	39
	40	The kernel uses the efi_memmap table returned from GetMemoryMap() to
	41	learn the attributes supported by each region of physical address
	42	space. Unfortunately, this table does not completely describe the
	43	address space because some machines omit some or all of the MMIO
	44	regions from the map.
	45
	46	The kernel maintains another table, kern_memmap, which describes the
	47	memory Linux is actually using and the attribute for each region.
	48	This contains only system memory; it does not contain MMIO space.
	49
	50	The kern_memmap table typically contains only a subset of the system
	51	memory described by the efi_memmap. Linux/ia64 can't use all memory
	52	in the system because of constraints imposed by the identity mapping
	53	scheme.
	54
	55	The efi_memmap table is preserved unmodified because the original
	56	boot-time information is required for kexec.
	57
	58	KERNEL IDENTITY MAPPINGS
	59
	60	Linux/ia64 identity mappings are done with large pages, currently
	61	either 16MB or 64MB, referred to as "granules." Cacheable mappings
	62	are speculative[2], so the processor can read any location in the
	63	page at any time, independent of the programmer's intentions. This
	64	means that to avoid attribute aliasing, Linux can create a cacheable
65	identity mapping only when the entire granule supports cacheable
66	access.
67
68	Therefore, kern_memmap contains only full granule-sized regions that
69	can referenced safely by an identity mapping.
70
71	Uncacheable mappings are not speculative, so the processor will
72	generate UC accesses only to locations explicitly referenced by
73	software. This allows UC identity mappings to cover granules that
74	are only partially populated, or populated with a combination of UC
75	and WB regions.
76
77	USER MAPPINGS
78
79	User mappings are typically done with 16K or 64K pages. The smaller
80	page size allows more flexibility because only 16K or 64K has to be
81	homogeneous with respect to memory attributes.
82
83	POTENTIAL ATTRIBUTE ALIASING CASES
84
85	There are several ways the kernel creates new mappings:
86
87	mmap of /dev/mem
88
89	This uses remap_pfn_range(), which creates user mappings. These
90	mappings may be either WB or UC. If the region being mapped
91	happens to be in kern_memmap, meaning that it may also be mapped
92	by a kernel identity mapping, the user mapping must use the same
93	attribute as the kernel mapping.
94
95	If the region is not in kern_memmap, the user mapping should use
96	an attribute reported as being supported in the EFI memory map.
97
98	Since the EFI memory map does not describe MMIO on some
99	machines, this should use an uncacheable mapping as a fallback.
100
101	mmap of /sys/class/pci_bus/.../legacy_mem
102
103	This is very similar to mmap of /dev/mem, except that legacy_mem
104	only allows mmap of the one megabyte "legacy MMIO" area for a
105	specific PCI bus. Typically this is the first megabyte of
106	physical address space, but it may be different on machines with
107	several VGA devices.
108
109	"X" uses this to access VGA frame buffers. Using legacy_mem
110	rather than /dev/mem allows multiple instances of X to talk to
111	different VGA cards.
112
113	The /dev/mem mmap constraints apply.
114
012b7105 AC	115	mmap of /proc/bus/pci/.../??.?
	116
	117	This is an MMIO mmap of PCI functions, which additionally may or
	118	may not be requested as using the WC attribute.
	119
	120	If WC is requested, and the region in kern_memmap is either WC
	121	or UC, and the EFI memory map designates the region as WC, then
	122	the WC mapping is allowed.
	123
	124	Otherwise, the user mapping must use the same attribute as the
	125	kernel mapping.
	126
32e62c63 BH	127	read/write of /dev/mem
	128
	129	This uses copy_from_user(), which implicitly uses a kernel
	130	identity mapping. This is obviously safe for things in
	131	kern_memmap.
	132
	133	There may be corner cases of things that are not in kern_memmap,
	134	but could be accessed this way. For example, registers in MMIO
	135	space are not in kern_memmap, but could be accessed with a UC
	136	mapping. This would not cause attribute aliasing. But
	137	registers typically can be accessed only with four-byte or
	138	eight-byte accesses, and the copy_from_user() path doesn't allow
	139	any control over the access size, so this would be dangerous.
	140
	141	ioremap()
	142
ddd83eff	143	This returns a mapping for use inside the kernel.
32e62c63 BH	144
32e62c63 BH	145	If the region is in kern_memmap, we should use the attribute
ddd83eff BH	146	specified there.
	147
	148	If the EFI memory map reports that the entire granule supports
	149	WB, we should use that (granules that are partially reserved
	150	or occupied by firmware do not appear in kern_memmap).
	151
	152	If the granule contains non-WB memory, but we can cover the
	153	region safely with kernel page table mappings, we can use
	154	ioremap_page_range() as most other architectures do.
	155
	156	Failing all of the above, we have to fall back to a UC mapping.
32e62c63 BH	157
	158	PAST PROBLEM CASES
	159
	160	mmap of various MMIO regions from /dev/mem by "X" on Intel platforms
	161
	162	The EFI memory map may not report these MMIO regions.
	163
	164	These must be allowed so that X will work. This means that
	165	when the EFI memory map is incomplete, every /dev/mem mmap must
	166	succeed. It may create either WB or UC user mappings, depending
	167	on whether the region is in kern_memmap or the EFI memory map.
	168
ddd83eff	169	mmap of 0x0-0x9FFFF /dev/mem by "hwinfo" on HP sx1000 with VGA enabled
32e62c63 BH	170
	171	See https://bugzilla.novell.com/show_bug.cgi?id=140858.
	172
	173	The EFI memory map reports the following attributes:
	174	0x00000-0x9FFFF WB only
	175	0xA0000-0xBFFFF UC only (VGA frame buffer)
	176	0xC0000-0xFFFFF WB only
	177
	178	This mmap is done with user pages, not kernel identity mappings,
	179	so it is safe to use WB mappings.
	180
	181	The kernel VGA driver may ioremap the VGA frame buffer at 0xA0000,
ddd83eff BH	182	which uses a granule-sized UC mapping. This granule will cover some
	183	WB-only memory, but since UC is non-speculative, the processor will
	184	never generate an uncacheable reference to the WB-only areas unless
	185	the driver explicitly touches them.
32e62c63 BH	186
	187	mmap of 0x0-0xFFFFF legacy_mem by "X"
	188
ddd83eff BH	189	If the EFI memory map reports that the entire range supports the
	190	same attributes, we can allow the mmap (and we will prefer WB if
	191	supported, as is the case with HP sx[12]000 machines with VGA
	192	disabled).
32e62c63	193
ddd83eff BH	194	If EFI reports the range as partly WB and partly UC (as on sx[12]000
	195	machines with VGA enabled), we must fail the mmap because there's no
	196	safe attribute to use.
32e62c63	197
ddd83eff BH	198	If EFI reports some of the range but not all (as on Intel firmware
	199	that doesn't report the VGA frame buffer at all), we should fail the
	200	mmap and force the user to map just the specific region of interest.
32e62c63 BH	201
	202	mmap of 0xA0000-0xBFFFF legacy_mem by "X" on HP sx1000 with VGA disabled
	203
	204	The EFI memory map reports the following attributes:
	205	0x00000-0xFFFFF WB only (no VGA MMIO hole)
	206
	207	This is a special case of the previous case, and the mmap should
	208	fail for the same reason as above.
	209
ddd83eff BH	210	read of /sys/devices/.../rom
	211
	212	For VGA devices, this may cause an ioremap() of 0xC0000. This
	213	used to be done with a UC mapping, because the VGA frame buffer
	214	at 0xA0000 prevents use of a WB granule. The UC mapping causes
	215	an MCA on HP sx[12]000 chipsets.
	216
	217	We should use WB page table mappings to avoid covering the VGA
	218	frame buffer.
	219
32e62c63 BH	220	NOTES
	221
	222	[1] SDM rev 2.2, vol 2, sec 4.4.1.
	223	[2] SDM rev 2.2, vol 2, sec 4.4.6.