Commit | Line | Data |
---|---|---|
f2272e13 LP |
1 | * Aptina 1/3-Inch WVGA CMOS Digital Image Sensor |
2 | ||
3 | The Aptina MT9V032 is a 1/3-inch CMOS active pixel digital image sensor with | |
4 | an active array size of 752H x 480V. It is programmable through a simple | |
5 | two-wire serial interface. | |
6 | ||
7 | Required Properties: | |
8 | ||
9 | - compatible: value should be either one among the following | |
10 | (a) "aptina,mt9v022" for MT9V022 color sensor | |
11 | (b) "aptina,mt9v022m" for MT9V022 monochrome sensor | |
12 | (c) "aptina,mt9v024" for MT9V024 color sensor | |
13 | (d) "aptina,mt9v024m" for MT9V024 monochrome sensor | |
14 | (e) "aptina,mt9v032" for MT9V032 color sensor | |
15 | (f) "aptina,mt9v032m" for MT9V032 monochrome sensor | |
16 | (g) "aptina,mt9v034" for MT9V034 color sensor | |
17 | (h) "aptina,mt9v034m" for MT9V034 monochrome sensor | |
18 | ||
19 | Optional Properties: | |
20 | ||
21 | - link-frequencies: List of allowed link frequencies in Hz. Each frequency is | |
22 | expressed as a 64-bit big-endian integer. | |
28d5bdbe MP |
23 | - reset-gpios: GPIO handle which is connected to the reset pin of the chip. |
24 | - standby-gpios: GPIO handle which is connected to the standby pin of the chip. | |
f2272e13 LP |
25 | |
26 | For further reading on port node refer to | |
27 | Documentation/devicetree/bindings/media/video-interfaces.txt. | |
28 | ||
29 | Example: | |
30 | ||
31 | mt9v032@5c { | |
32 | compatible = "aptina,mt9v032"; | |
33 | reg = <0x5c>; | |
34 | ||
35 | port { | |
36 | mt9v032_out: endpoint { | |
37 | link-frequencies = /bits/ 64 | |
38 | <13000000 26600000 27000000>; | |
39 | }; | |
40 | }; | |
41 | }; |